loop: remove most the top-of-file boilerplate comment from the UAPI header

Just leave the SPDX marker and the copyright notice and remove the
irrelevant rest.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220419063303.583106-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: fix ioctl calls using compat_loop_info

Support for cryptoloop was deleted in commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer"), making the usage
of loop_info->lo_encrypt_type obsolete. However, this member was also
removed from the compat_loop_info definition and this breaks userspace
ioctl calls for 32-bit binaries and CONFIG_COMPAT=y.

This patch restores the compat_loop_info->lo_encrypt_type member and
marks it obsolete as well as in the uapi header definitions.

Fixes: 47e9624616c8 ("block: remove support for cryptoloop and the xor transfer")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220329201815.1347500-1-cmllamas@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: Add LOOP_CONFIGURE ioctl

This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.

Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.

In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags

Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system

Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:

vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: Clean up LOOP_SET_STATUS lo_flags handling

LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.

The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.

Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

License cleanup: add SPDX license identifier to uapi header files with a license

Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: add ioctl for changing logical block size

This is a different approach from the first attempt in f2c6df7dbf9a
("loop: support 4k physical blocksize"). Rather than extending
LOOP_{GET,SET}_STATUS, add a separate ioctl just for setting the block
size.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "loop: support 4k physical blocksize"

There's some stuff still up in the air, let's not get stuck with a
subpar ABI. I'll follow up with something better for 4.14.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

loop: support 4k physical blocksize

When generating bootable VM images certain systems (most notably
s390x) require devices with 4k blocksize. This patch implements
a new flag 'LO_FLAGS_BLOCKSIZE' which will set the physical
blocksize to that of the underlying device, and allow to change
the logical blocksize for up to the physical blocksize.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO

If loop block is mounted via 'mount -o loop', it isn't easy
to pass file descriptor opened as O_DIRECT, so this patch
introduces a new command to support direct IO for this case.

Cc: linux-api@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: loop: prepare for supporing direct IO

This patches provides one interface for enabling direct IO
from user space:

- userspace(such as losetup) can pass 'file' which is
opened/fcntl as O_DIRECT

Also __loop_update_dio() is introduced to check if direct I/O
can be used on current loop setting.

The last big change is to introduce LO_FLAGS_DIRECT_IO flag
for userspace to know if direct IO is used to access backing
file.

Cc: linux-api@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>