#
b573c731 |
|
01-Dec-2023 |
Anna-Maria Behnsen <anna-maria@linutronix.de> |
tracing/timers: Add tracepoint for tracking timer base is_idle flag When debugging timer code the timer tracepoints are very important. There is no tracepoint when the is_idle flag of the timer base changes. Instead of always adding manually trace_printk(), add tracepoints which can be easily enabled whenever required. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20231201092654.34614-6-anna-maria@linutronix.de
|
#
dbcdcb62 |
|
01-Dec-2023 |
Anna-Maria Behnsen <anna-maria@linutronix.de> |
tracing/timers: Enhance timer_start tracepoint For starting a timer, the timer is enqueued into a bucket of the timer wheel. The bucket expiry is the defacto expiry of the timer but it is not equal the timer expiry because of increasing granularity when bucket is in a higher level of the wheel. To be able to figure out in a trace whether a timer expired in time or not, the bucket expiry time is required as well. Add bucket expiry time to the timer_start tracepoint and thereby simplify the arguments. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20231201092654.34614-5-anna-maria@linutronix.de
|
#
2951580b |
|
18-Apr-2023 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode(). The trace output for the HRTIMER_MODE_.*_HARD modes is seen as a number since these modes are not decoded. The author was not aware of the fancy decoding function which makes the life easier. Extend decode_hrtimer_mode() with the additional HRTIMER_MODE_.*_HARD modes. Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230418143854.8vHWQKLM@linutronix.de
|
#
db7b464d |
|
20-Dec-2022 |
Zqiang <qiang1.zhang@intel.com> |
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check This commit adds checks for the TICK_DEP_MASK_RCU_EXP bit, thus enabling RCU expedited grace periods to actually force-enable scheduling-clock interrupts on holdout CPUs. Fixes: df1e849ae455 ("rcu: Enable tick for nohz_full CPUs slow to provide expedited QS") Signed-off-by: Zqiang <qiang1.zhang@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Acked-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
#
fde33ca4 |
|
11-Apr-2022 |
Anna-Maria Behnsen <anna-maria@linutronix.de> |
tracing/timer: Add missing argument documentation of trace points Documentation of trace points timer_start, timer_expire_entry and hrtimer_start lack always the last argument. Add it to keep implementation and documentation in sync. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20220411140115.24185-1-anna-maria@linutronix.de
|
#
f2cc020d |
|
23-Mar-2021 |
Ingo Molnar <mingo@kernel.org> |
tracing: Fix various typos in comments Fix ~59 single-word typos in the tracing code comments, and fix the grammar in a handful of places. Link: https://lore.kernel.org/r/20210322224546.GA1981273@gmail.com Link: https://lkml.kernel.org/r/20210323174935.GA4176821@gmail.com Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
#
bd40a175 |
|
07-Nov-2019 |
Arnd Bergmann <arnd@arndb.de> |
y2038: itimer: change implementation to timespec64 There is no 64-bit version of getitimer/setitimer since that is not actually needed. However, the implementation is built around the deprecated 'struct timeval' type. Change the code to use timespec64 internally to reduce the dependencies on timeval and associated helper functions. Minor adjustments in the code are needed to make the native and compat version work the same way, and to keep the range check working after the conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
01b4c399 |
|
24-Jul-2019 |
Frederic Weisbecker <frederic@kernel.org> |
nohz: Add TICK_DEP_BIT_RCU If a nohz_full CPU is looping in the kernel, the scheduling-clock tick might nevertheless remain disabled. In !PREEMPT kernels, this can prevent RCU's attempts to enlist the aid of that CPU's executions of cond_resched(), which can in turn result in an arbitrarily delayed grace period and thus an OOM. RCU therefore needs a way to enable a holdout nohz_full CPU's scheduler-clock interrupt. This commit therefore provides a new TICK_DEP_BIT_RCU value which RCU can pass to tick_dep_set_cpu() and friends to force on the scheduler-clock interrupt for a specified CPU or task. In some cases, rcutorture needs to turn on the scheduler-clock tick, so this commit also exports the relevant symbols to GPL-licensed modules. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
#
f28d3d53 |
|
21-Mar-2019 |
Anna-Maria Gleixner <anna-maria@linutronix.de> |
timer/trace: Improve timer tracing Timers are added to the timer wheel off by one. This is required in case a timer is queued directly before incrementing jiffies to prevent early timer expiry. When reading a timer trace and relying only on the expiry time of the timer in the timer_start trace point and on the now in the timer_expiry_entry trace point, it seems that the timer fires late. With the current timer_expiry_entry trace point information only now=jiffies is printed but not the value of base->clk. This makes it impossible to draw a conclusion to the index of base->clk and makes it impossible to examine timer problems without additional trace points. Therefore add the base->clk value to the timer_expire_entry trace point, to be able to calculate the index the timer base is located at during collecting expired timers. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20190321120921.16463-5-anna-maria@linutronix.de
|
#
6849cbb0 |
|
21-Mar-2019 |
Anna-Maria Gleixner <anna-maria@linutronix.de> |
timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps Since commit 04b8eb7a4ccd ("symbol lookup: introduce dereference_symbol_descriptor()") %pf is deprecated, because %ps is smart enough to handle function pointer dereference on platforms where such a dereference is required. While at it add proper line breaks to stay in the 80 character limit. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20190321120921.16463-4-anna-maria@linutronix.de
|
#
98ecadd4 |
|
21-Dec-2017 |
Anna-Maria Gleixner <anna-maria@linutronix.de> |
hrtimer: Add clock bases and hrtimer mode for softirq context Currently hrtimer callback functions are always executed in hard interrupt context. Users of hrtimers, which need their timer function to be executed in soft interrupt context, make use of tasklets to get the proper context. Add additional hrtimer clock bases for timers which must expire in softirq context, so the detour via the tasklet can be avoided. This is also required for RT, where the majority of hrtimer is moved into softirq hrtimer context. The selection of the expiry mode happens via a mode bit. Introduce HRTIMER_MODE_SOFT and the matching combinations with the ABS/REL/PINNED bits and update the decoding of hrtimer_mode in tracepoints. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-27-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
63e2ed36 |
|
21-Dec-2017 |
Anna-Maria Gleixner <anna-maria@linutronix.de> |
tracing/hrtimer: Print the hrtimer mode in the 'hrtimer_start' tracepoint The 'hrtimer_start' tracepoint lacks the mode information. The mode is important because consecutive starts can switch from ABS to REL or from PINNED to non PINNED. Append the mode field. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-10-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
91633eed |
|
21-Dec-2017 |
Anna-Maria Gleixner <anna-maria@linutronix.de> |
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for detecting the ABS or REL timer modes is not valid anymore, it got broken by the introduction of HRTIMER_MODE_PINNED. HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the sake of completeness print all given modes. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
8a58a34b |
|
10-Feb-2017 |
Thomas Gleixner <tglx@linutronix.de> |
timers: Make flags output in the timer_start tracepoint useful The timer flags in the timer_start trace event contain lots of useful information, but the meaning is not clear in the trace output. Making tools rely on the bit positions is bad as they might change over time. Decode the flags in the print out. Tools can retrieve the bits and their meaning from the trace format file. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1702101639290.4036@nanos Requested-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
#
858cf3a8 |
|
30-Jan-2017 |
Frederic Weisbecker <fweisbec@gmail.com> |
timers/itimer: Convert internal cputime_t units to nsec Use the new nsec based cputime accessors as part of the whole cputime conversion from cputime_t to nsecs. Also convert itimers to use nsec based internal counters. This simplifies it and removes the whole game with error/inc_error which served to deal with cputime_t random granularity. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-20-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
2456e855 |
|
25-Dec-2016 |
Thomas Gleixner <tglx@linutronix.de> |
ktime: Get rid of the union ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
|
#
c87edb36 |
|
04-Aug-2016 |
Steven Rostedt (Red Hat) <rostedt@goodmis.org> |
tracing: Fix tick_stop tracepoint symbols for user export The symbols used in the tick_stop tracepoint were not being converted properly into integers in the trace_stop format file. Instead we had this: print fmt: "success=%d dependency=%s", REC->success, __print_symbolic(REC->dependency, { 0, "NONE" }, { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" }, { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" }, { (1 << TICK_DEP_BIT_SCHED), "SCHED" }, { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" }) User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other symbols used to do the bit shifting. The reason is that the conversion was done with using the TICK_DEP_MASK_* symbols which are just macros that convert to the BIT shift itself (with the exception of NONE, which was converted properly, because it doesn't use bits, and is defined as zero). The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to have this properly converted for user space tools to parse this event. Cc: stable@vger.kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message") Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
#
e6e6cc22 |
|
10-Dec-2015 |
Frederic Weisbecker <fweisbec@gmail.com> |
nohz: Use enum code for tick stop failure tracing message It makes nohz tracing more lightweight, standard and easier to parse. Examples: user_loop-2904 [007] d..1 517.701126: tick_stop: success=1 dependency=NONE user_loop-2904 [007] dn.1 518.021181: tick_stop: success=0 dependency=SCHED posix_timers-6142 [007] d..1 1739.027400: tick_stop: success=0 dependency=POSIX_TIMER user_loop-5463 [007] dN.1 1185.931939: tick_stop: success=0 dependency=PERF_EVENTS Suggested-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
#
0eeda71b |
|
26-May-2015 |
Thomas Gleixner <tglx@linutronix.de> |
timer: Replace timer base by a cpu index Instead of storing a pointer to the per cpu tvec_base we can simply cache a CPU index in the timer_list and use that to get hold of the correct per cpu tvec_base. This is only used in lock_timer_base() and the slightly larger code is peanuts versus the spinlock operation and the d-cache foot print of the timer wheel. Aside of that this allows to get rid of following nuisances: - boot_tvec_base That statically allocated 4k bss data is just kept around so the timer has a home when it gets statically initialized. It serves no other purpose. With the CPU index we assign the timer to CPU0 at static initialization time and therefor can avoid the whole boot_tvec_base dance. That also simplifies the init code, which just can use the per cpu base. Before: text data bss dec hex filename 17491 9201 4160 30852 7884 ../build/kernel/time/timer.o After: text data bss dec hex filename 17440 9193 0 26633 6809 ../build/kernel/time/timer.o - Overloading the base pointer with various flags The CPU index has enough space to hold the flags (deferrable, irqsafe) so we can get rid of the extra masking and bit fiddling with the base pointer. As a benefit we reduce the size of struct timer_list on 64 bit machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list, which is a real win as we have tons of them embedded in other structs. This changes also the newly added deferrable printout of the timer start trace point to capture and print all timer->flags, which allows us to decode the target cpu of the timer as well. We might have used bitfields for this, but that would change the static initializers and the init function for no value to accomodate big endian bitfields. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Badhri Jagan Sridharan <Badhri@google.com> Link: http://lkml.kernel.org/r/20150526224511.950084301@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
4e413e85 |
|
07-May-2015 |
Badhri Jagan Sridharan <badhri@google.com> |
tracing: timer: Add deferrable flag to timer_start The timer_start event now shows whether the timer is deferrable in case of a low-res timer. The debug_activate function now includes a deferrable flag while calling the trace_timer_start event. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com> [jstultz: Fixed minor whitespace and grammer tweaks pointed out by Ingo] Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
2c82d1be |
|
20-Apr-2013 |
Frederic Weisbecker <fweisbec@gmail.com> |
nohz: Fix unavailable tick_stop tracepoint in dynticks idle The trace_tick_stop() tracepoint is only available in full dynticks. But it's also used by dynticks-idle so let's build it for the latter config as well. This fixes: kernel/time/tick-sched.c: In function tick_nohz_stop_sched_tick: kernel/time/tick-sched.c:644: error: implicit declaration of function trace_tick_stop make[2]: *** [kernel/time/tick-sched.o] Erreur 1 Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
|
#
cb41a290 |
|
20-Apr-2013 |
Frederic Weisbecker <fweisbec@gmail.com> |
nohz: Add basic tracing It's not obvious to find out why the full dynticks subsystem doesn't always stop the tick: whether this is due to kthreads, posix timers, perf events, etc... These new tracepoints are here to help the user diagnose the failures and test this feature. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
|
#
cf2fbdd2 |
|
16-Mar-2013 |
Masanari Iida <standby24x7@gmail.com> |
treewide: Fix typos in printk and comment Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
ede1b429 |
|
18-Aug-2010 |
Arjan van de Ven <arjan@linux.intel.com> |
tracing: Fix timer tracing PowerTOP would like to be able to trace timers. Unfortunately, the current timer tracing is not very useful: the actual timer function is not recorded in the trace at the start of timer execution. Although this is recorded for timer "start" time (when it gets armed), this is not useful; most timers get started early, and a tracer like PowerTOP will never see this event, but will only see the actual running of the timer. This patch just adds the function to the timer tracing; I've verified with PowerTOP that now it can get useful information about timers. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: xiaoguangrong@cn.fujitsu.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> # .35.x, .34.x, .33.x LKML-Reference: <4C6C5FA9.3000405@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
363d0f64 |
|
24-May-2010 |
Li Zefan <lizf@cn.fujitsu.com> |
tracing: Convert some timer events to DEFINE_EVENT Use DECLARE_EVENT_CLASS, and save ~2.3K: text data bss dec hex filename 7018823 2031888 7251132 16301843 f8bf13 vmlinux.o.orig 7016727 2031696 7251132 16299555 f8b623 vmlinux.o 5 events are converted: timer_class: timer_init, timer_expire_exit, timer_cancel hrtimer_class: hrtimer_init, hrtimer_cancel No change in functionality. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4BFA3773.3060200@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
#
e9c0748b |
|
10-Dec-2009 |
Thomas Gleixner <tglx@linutronix.de> |
itimer: Fix the itimer trace print format Compiling powerpc64 results in: include/trace/events/timer.h:279: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'cputime_t' .... cputime_t on power is u64, which triggers the above warning. Cast the cputime_t to unsigned long long and fix the print format string. That works on both 32 and 64 bit architectures. While at it change the print format for long variables from %lu to %ld. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
|
#
434a83c3 |
|
15-Oct-2009 |
Ingo Molnar <mingo@elte.hu> |
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
3f0a525e |
|
09-Aug-2009 |
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> |
itimers: Add tracepoints for itimer Add tracepoints for all itimer variants: ITIMER_REAL, ITIMER_VIRTUAL and ITIMER_PROF. [ tglx: Fixed comments and made the output more readable, parseable and consistent. Replaced pid_vnr by pid_nr because the hrtimer callback can happen in any namespace ] Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> LKML-Reference: <4A7F8B6E.2010109@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
c6a2a177 |
|
09-Aug-2009 |
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> |
hrtimer: Add tracepoint for hrtimers Add tracepoints which cover the life cycle of a hrtimer. The tracepoints are integrated with the already existing debug_object debug points as far as possible. [ tglx: Fixed comments, made output conistent, easier to read and parse. Fixed output for 32bit archs which do not use the scalar representation of ktime_t. Hand current time to trace_hrtimer_expiry_entry instead of calling get_time() inside of the trace assignment. ] Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> LKML-Reference: <4A7F8B2B.5020908@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
2b022e3d |
|
09-Aug-2009 |
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> |
timers: Add tracepoints for timer_list timers Add tracepoints which cover the timer life cycle. The tracepoints are integrated with the already existing debug_object debug points as far as possible. Based on patches from Mathieu: http://marc.info/?l=linux-kernel&m=123791201816247&w=2 and Anton: http://marc.info/?l=linux-kernel&m=124331396919301&w=2 [ tglx: Fixed timeout value in timer_start tracepoint, massaged comments and made the printk's more readable ] Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Anton Blanchard <anton@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Peter Zijlstra <peterz@infradead.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> LKML-Reference: <4A7F8A9B.3040201@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|