mm/mglru: fix underprotected page cache

Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:

1. The fact that they are less costly to reclaim (no need to walk the
rmap and flush the TLB) and have less impact on performance (don't
cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
client use cases like Android, its apps parse configuration files
and store the data in heap (anon); for server use cases like MySQL,
it reads from InnoDB files and holds the cached data for tables in
buffer pools (anon).

However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults. (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.

To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
tracking range of tiers, i.e., five accesses through file
descriptors, move them to the second oldest generation to give them
more time to age. (Note that tiers are used by the PID controller
to statistically determine whether folios accessed multiple times
through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
that they are not too close to the tail. The effect of this is
similar to the above.

On Android, launching 55 apps sequentially:
Before After Change
workingset_refault_anon 25641024 25598972 0%
workingset_refault_file 115016834 106178438 -8%

Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move vma_policy() and anon_vma_name() decls to mm_types.h

Patch series "Abstract vma_merge() and split_vma()", v4.

The vma_merge() interface is very confusing and its implementation has led
to numerous bugs as a result of that confusion.

In addition there is duplication both in invocation of vma_merge(), but
also in the common mprotect()-style pattern of attempting a merge, then if
this fails, splitting the portion of a VMA about to have its attributes
changed.

This pattern has been copy/pasted around the kernel in each instance where
such an operation has been required, each very slightly modified from the
last to make it even harder to decipher what is going on.

Simplify the whole thing by dividing the actual uses of vma_merge() and
split_vma() into specific and abstracted functions and de-duplicate the
vma_merge()/split_vma() pattern altogether.

Doing so also opens the door to changing how vma_merge() is implemented -
by knowing precisely what cases a caller is invoking rather than having a
central interface where anything might happen we can untangle the brittle
and confusing vma_merge() implementation into something more workable.

For mprotect()-like cases we introduce vma_modify() which performs the
vma_merge()/split_vma() pattern, returning a pointer to either the merged
or split VMA or an ERR_PTR(err) if the splits fail.

We provide a number of inline helper functions to make things even clearer:-

* vma_modify_flags() - Prepare to modify the VMA's flags.
* vma_modify_flags_name() - Prepare to modify the VMA's flags/anon_vma_name
* vma_modify_policy() - Prepare to modify the VMA's mempolicy.
* vma_modify_flags_uffd() - Prepare to modify the VMA's flags/uffd context.

For cases where a new VMA is attempted to be merged with adjacent VMAs we
add:-

* vma_merge_new_vma() - Prepare to merge a new VMA.
* vma_merge_extend() - Prepare to extend the end of a new VMA.


This patch (of 5):

The vma_policy() define is a helper specifically for a VMA field so it
makes sense to host it in the memory management types header.

The anon_vma_name(), anon_vma_name_alloc() and anon_vma_name_free()
functions are a little out of place in mm_inline.h as they define external
functions, and so it makes sense to locate them in mm_types.h.

The purpose of these relocations is to make it possible to abstract static
inline wrappers which invoke both of these helpers.

Link: https://lkml.kernel.org/r/cover.1697043508.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/24bfc6c9e382fffbcb0ea8d424392c27d56cc8ca.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm-make-pte_marker_swapin_error-more-general-fix

fix CONFIG_MMU=n build

Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: make PTE_MARKER_SWAPIN_ERROR more general

Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.

This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.


This patch (of 8):

Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:

First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.

Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.

For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.

Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.

Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: kill [add|del]_page_to_lru_list()

Now no one call [add|del]_page_to_lru_list(), let's drop unused page
interfaces.

Link:https://lkml.kernel.org/r/20230619110718.65679-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: ptep_get() conversion

Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.

But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.

Conversion was done using Coccinelle:

----

// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch

virtual patch

@ depends on patch @
pte_t *v;
@@

- *v
+ ptep_get(v)

----

Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.

Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.

Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/uffd: UFFD_FEATURE_WP_UNPOPULATED

Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4.

The new feature bit makes anonymous memory acts the same as file memory on
userfaultfd-wp in that it'll also wr-protect none ptes.

It can be useful in two cases:

(1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot,
so pre-fault can be replaced by enabling this flag and speed up
protections

(2) It helps to implement async uffd-wp mode that Muhammad is working on [1]

It's debatable whether this is the most ideal solution because with the
new feature bit set, wr-protect none pte needs to pre-populate the
pgtables to the last level (PAGE_SIZE). But it seems fine so far to
service either purpose above, so we can leave optimizations for later.

The series brings pte markers to anonymous memory too. There's some
change in the common mm code path in the 1st patch, great to have some eye
looking at it, but hopefully they're still relatively straightforward.


This patch (of 2):

This is a new feature that controls how uffd-wp handles none ptes. When
it's set, the kernel will handle anonymous memory the same way as file
memory, by allowing the user to wr-protect unpopulated ptes.

File memories handles none ptes consistently by allowing wr-protecting of
none ptes because of the unawareness of page cache being exist or not.
For anonymous it was not as persistent because we used to assume that we
don't need protections on none ptes or known zero pages.

One use case of such a feature bit was VM live snapshot, where if without
wr-protecting empty ptes the snapshot can contain random rubbish in the
holes of the anonymous memory, which can cause misbehave of the guest when
the guest OS assumes the pages should be all zeros.

QEMU worked it around by pre-populate the section with reads to fill in
zero page entries before starting the whole snapshot process [1].

Recently there's another need raised on using userfaultfd wr-protect for
detecting dirty pages (to replace soft-dirty in some cases) [2]. In that
case if without being able to wr-protect none ptes by default, the dirty
info can get lost, since we cannot treat every none pte to be dirty (the
current design is identify a page dirty based on uffd-wp bit being
cleared).

In general, we want to be able to wr-protect empty ptes too even for
anonymous.

This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make
uffd-wp handling on none ptes being consistent no matter what the memory
type is underneath. It doesn't have any impact on file memories so far
because we already have pte markers taking care of that. So it only
affects anonymous.

The feature bit is by default off, so the old behavior will be maintained.
Sometimes it may be wanted because the wr-protect of none ptes will
contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte
markers to anonymous), but also on creating the pgtables to store the pte
markers. So there's potentially less chance of using thp on the first
fault for a none pmd or larger than a pmd.

The major implementation part is teaching the whole kernel to understand
pte markers even for anonymously mapped ranges, meanwhile allowing the
UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the
new feature bit is set.

Note that even if the patch subject starts with mm/uffd, there're a few
small refactors to major mm path of handling anonymous page faults. But
they should be straightforward.

With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all
the memory before wr-protect during taking a live snapshot. Quotting from
Muhammad's test result here [3] based on a simple program [4]:

(1) With huge page disabled
echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 1111453 (pre-fault 1101011)
Test MADVISE: 278276 (pre-fault 266378)
Test WP-UNPOPULATE: 11712

(2) With Huge page enabled
echo always > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 22521 (pre-fault 22348)
Test MADVISE: 4909 (pre-fault 4743)
Test WP-UNPOPULATE: 14448

There'll be a great perf boost for no-thp case, while for thp enabled with
extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE,
but that's low possibility in reality, also the overhead was not reduced
but postponed until a follow up write on any huge zero thp, so potentially
it is faster by making the follow up writes slower.

[1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/
[2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/
[3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/
[4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c

[peterx@redhat.com: comment changes, oneliner fix to khugepaged]
Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n
Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: section for memcg LRU

Move memcg LRU code into a dedicated section. Improve the design doc to
outline its architecture.

Link: https://lkml.kernel.org/r/20230118001827.1040870-5-talumbau@google.com
Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: support POSIX_FADV_NOREUSE

This patch adds POSIX_FADV_NOREUSE to vma_has_recency() so that the LRU
algorithm can ignore access to mapped files marked by this flag.

The advantages of POSIX_FADV_NOREUSE are:
1. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not alter the
default readahead behavior.
2. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not split VMAs and
therefore does not take mmap_lock.
3. Unlike MADV_COLD, setting it has a negligible cost, regardless of
how many pages it affects.

Its limitations are:
1. Like POSIX_FADV_RANDOM and POSIX_FADV_SEQUENTIAL, it currently does
not support range. IOW, its scope is the entire file.
2. It currently does not ignore access through file descriptors.
Specifically, for the active/inactive LRU, given a file page shared
by two users and one of them having set POSIX_FADV_NOREUSE on the
file, this page will be activated upon the second user accessing
it. This corner case can be covered by checking POSIX_FADV_NOREUSE
before calling folio_mark_accessed() on the read path. But it is
considered not worth the effort.

There have been a few attempts to support POSIX_FADV_NOREUSE, e.g., [1].
This time the goal is to fill a niche: a few desktop applications, e.g.,
large file transferring and video encoding/decoding, want fast file
streaming with mmap() rather than direct IO. Among those applications, an
SVT-AV1 regression was reported when running with MGLRU [2]. The
following test can reproduce that regression.

kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
kb=$((kb - 8*1024*1024))

modprobe brd rd_nr=1 rd_size=$kb
dd if=/dev/zero of=/dev/ram0 bs=1M

mkfs.ext4 /dev/ram0
mount /dev/ram0 /mnt/
swapoff -a

fallocate -l 8G /mnt/swapfile
mkswap /mnt/swapfile
swapon /mnt/swapfile

wget http://ultravideo.cs.tut.fi/video/Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
7z e -o/mnt/ Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
SvtAv1EncApp --preset 12 -w 3840 -h 2160 \
-i /mnt/Bosphorus_3840x2160.y4m

For MGLRU, the following change showed a [9-11]% increase in FPS,
which makes it on par with the active/inactive LRU.

patch Source/App/EncApp/EbAppMain.c <<EOF
31a32
> #include <fcntl.h>
35d35
< #include <fcntl.h> /* _O_BINARY */
117a118
> posix_fadvise(config->mmap.fd, 0, 0, POSIX_FADV_NOREUSE);
EOF

[1] https://lore.kernel.org/r/1308923350-7932-1-git-send-email-andrea@betterlinux.com/
[2] https://openbenchmarking.org/result/2209259-PTS-MGLRU8GB57

Link: https://lkml.kernel.org/r/20221230215252.2628425-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Righi <andrea.righi@canonical.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add vma_has_recency()

Add vma_has_recency() to indicate whether a VMA may exhibit temporal
locality that the LRU algorithm relies on.

This function returns false for VMAs marked by VM_SEQ_READ or
VM_RAND_READ. While the former flag indicates linear access, i.e., a
special case of spatial locality, both flags indicate a lack of temporal
locality, i.e., the reuse of an area within a relatively small duration.

"Recency" is chosen over "locality" to avoid confusion between temporal
and spatial localities.

Before this patch, the active/inactive LRU only ignored the accessed bit
from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive
LRU and MGLRU share the same logic: they both ignore the accessed bit if
vma_has_recency() returns false.

For the active/inactive LRU, the following fio test showed a [6, 8]%
increase in IOPS when randomly accessing mapped files under memory
pressure.

kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
kb=$((kb - 8*1024*1024))

modprobe brd rd_nr=1 rd_size=$kb
dd if=/dev/zero of=/dev/ram0 bs=1M

mkfs.ext4 /dev/ram0
mount /dev/ram0 /mnt/
swapoff -a

fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \
--size=8G --rw=randrw --time_based --runtime=10m \
--group_reporting

The discussion that led to this patch is here [1]. Additional test
results are available in that thread.

[1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/

Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Righi <andrea.righi@canonical.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: per-node lru_gen_folio lists

For each node, memcgs are divided into two generations: the old and
the young. For each generation, memcgs are randomly sharded into
multiple bins to improve scalability. For each bin, an RCU hlist_nulls
is virtually divided into three segments: the head, the tail and the
default.

An onlining memcg is added to the tail of a random bin in the old
generation. The eviction starts at the head of a random bin in the old
generation. The per-node memcg generation counter, whose reminder (mod
2) indexes the old generation, is incremented when all its bins become
empty.

There are four operations:
1. MEMCG_LRU_HEAD, which moves an memcg to the head of a random bin in
its current generation (old or young) and updates its "seg" to
"head";
2. MEMCG_LRU_TAIL, which moves an memcg to the tail of a random bin in
its current generation (old or young) and updates its "seg" to
"tail";
3. MEMCG_LRU_OLD, which moves an memcg to the head of a random bin in
the old generation, updates its "gen" to "old" and resets its "seg"
to "default";
4. MEMCG_LRU_YOUNG, which moves an memcg to the tail of a random bin
in the young generation, updates its "gen" to "young" and resets
its "seg" to "default".

The events that trigger the above operations are:
1. Exceeding the soft limit, which triggers MEMCG_LRU_HEAD;
2. The first attempt to reclaim an memcg below low, which triggers
MEMCG_LRU_TAIL;
3. The first attempt to reclaim an memcg below reclaimable size
threshold, which triggers MEMCG_LRU_TAIL;
4. The second attempt to reclaim an memcg below reclaimable size
threshold, which triggers MEMCG_LRU_YOUNG;
5. Attempting to reclaim an memcg below min, which triggers
MEMCG_LRU_YOUNG;
6. Finishing the aging on the eviction path, which triggers
MEMCG_LRU_YOUNG;
7. Offlining an memcg, which triggers MEMCG_LRU_OLD.

Note that memcg LRU only applies to global reclaim, and the
round-robin incrementing of their max_seq counters ensures the
eventual fairness to all eligible memcgs. For memcg reclaim, it still
relies on mem_cgroup_iter().

Link: https://lkml.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: rename lrugen->lists[] to lrugen->folios[]

lru_gen_folio will be chained into per-node lists by the coming
lrugen->list.

Link: https://lkml.kernel.org/r/20221222041905.2431096-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: rename lru_gen_struct to lru_gen_folio

Patch series "mm: multi-gen LRU: memcg LRU", v3.

Overview
========

An memcg LRU is a per-node LRU of memcgs. It is also an LRU of LRUs,
since each node and memcg combination has an LRU of folios (see
mem_cgroup_lruvec()).

Its goal is to improve the scalability of global reclaim, which is
critical to system-wide memory overcommit in data centers. Note that
memcg reclaim is currently out of scope.

Its memory bloat is a pointer to each lruvec and negligible to each
pglist_data. In terms of traversing memcgs during global reclaim, it
improves the best-case complexity from O(n) to O(1) and does not affect
the worst-case complexity O(n). Therefore, on average, it has a sublinear
complexity in contrast to the current linear complexity.

The basic structure of an memcg LRU can be understood by an analogy to
the active/inactive LRU (of folios):
1. It has the young and the old (generations), i.e., the counterparts
to the active and the inactive;
2. The increment of max_seq triggers promotion, i.e., the counterpart
to activation;
3. Other events trigger similar operations, e.g., offlining an memcg
triggers demotion, i.e., the counterpart to deactivation.

In terms of global reclaim, it has two distinct features:
1. Sharding, which allows each thread to start at a random memcg (in
the old generation) and improves parallelism;
2. Eventual fairness, which allows direct reclaim to bail out at will
and reduces latency without affecting fairness over some time.

The commit message in patch 6 details the workflow:
https://lore.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com/

The following is a simple test to quickly verify its effectiveness.

Test design:
1. Create multiple memcgs.
2. Each memcg contains a job (fio).
3. All jobs access the same amount of memory randomly.
4. The system does not experience global memory pressure.
5. Periodically write to the root memory.reclaim.

Desired outcome:
1. All memcgs have similar pgsteal counts, i.e., stddev(pgsteal)
over mean(pgsteal) is close to 0%.
2. The total pgsteal is close to the total requested through
memory.reclaim, i.e., sum(pgsteal) over sum(requested) is close
to 100%.

Actual outcome [1]:
MGLRU off MGLRU on
stddev(pgsteal) / mean(pgsteal) 75% 20%
sum(pgsteal) / sum(requested) 425% 95%

####################################################################
MEMCGS=128

for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
mkdir /sys/fs/cgroup/memcg$memcg
done

start() {
echo $BASHPID > /sys/fs/cgroup/memcg$memcg/cgroup.procs

fio -name=memcg$memcg --numjobs=1 --ioengine=mmap \
--filename=/dev/zero --size=1920M --rw=randrw \
--rate=64m,64m --random_distribution=random \
--fadvise_hint=0 --time_based --runtime=10h \
--group_reporting --minimal
}

for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
start &
done

sleep 600

for ((i = 0; i < 600; i++)); do
echo 256m >/sys/fs/cgroup/memory.reclaim
sleep 6
done

for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
grep "pgsteal " /sys/fs/cgroup/memcg$memcg/memory.stat
done
####################################################################

[1]: This was obtained from running the above script (touches less
than 256GB memory) on an EPYC 7B13 with 512GB DRAM for over an
hour.


This patch (of 8):

The new name lru_gen_folio will be more distinct from the coming
lru_gen_memcg.

Link: https://lkml.kernel.org/r/20221222041905.2431096-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/20221222041905.2431096-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: fix vma->anon_name memory leak for anonymous shmem VMAs

free_anon_vma_name() is missing a check for anonymous shmem VMA which
leads to a memory leak due to refcount not being dropped. Fix this by
calling anon_vma_name_put() unconditionally. It will free vma->anon_name
whenever it's non-NULL.

Link: https://lkml.kernel.org/r/20230105000241.1450843-1-surenb@google.com
Fixes: d09e8ca6cb93 ("mm: anonymous shared memory naming")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+91edf9178386a07d06a7@syzkaller.appspotmail.com
Cc: Hugh Dickins <hughd@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove unused inline functions from include/linux/mm_inline.h

Remove the following unused inline functions from mm_inline.h:

1. All uses of add_page_to_lru_list_tail() have been removed since
commit 7a3dbfe8a52b ("mm/swap: convert lru_deactivate_file to a
folio_batch"), and it can be replaced by lruvec_add_folio_tail().

2. All uses of __clear_page_lru_flags() have been removed since commit
188e8caee968 ("mm/swap: convert __page_cache_release() to use a
folio"), and it can be replaced by __folio_clear_lru_flags().

They are useless, so remove them.

Link: https://lkml.kernel.org/r/20220922110935.1495099-1-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: kill switch

Add /sys/kernel/mm/lru_gen/enabled as a kill switch. Components that
can be disabled include:
0x0001: the multi-gen LRU core
0x0002: walking page table, when arch_has_hw_pte_young() returns
true
0x0004: clearing the accessed bit in non-leaf PMD entries, when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
[yYnN]: apply to all the components above
E.g.,
echo y >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0007
echo 5 >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0005

NB: the page table walks happen on the scale of seconds under heavy memory
pressure, in which case the mmap_lock contention is a lesser concern,
compared with the LRU lock contention and the I/O congestion. So far the
only well-known case of the mmap_lock contention happens on Android, due
to Scudo [1] which allocates several thousand VMAs for merely a few
hundred MBs. The SPF and the Maple Tree also have provided their own
assessments [2][3]. However, if walking page tables does worsen the
mmap_lock contention, the kill switch can be used to disable it. In this
case the multi-gen LRU will suffer a minor performance degradation, as
shown previously.

Clearing the accessed bit in non-leaf PMD entries can also be disabled,
since this behavior was not tested on x86 varieties other than Intel and
AMD.

[1] https://source.android.com/devices/tech/debug/scudo
[2] https://lore.kernel.org/r/20220128131006.67712-1-michel@lespinasse.org/
[3] https://lore.kernel.org/r/20220426150616.3937571-1-Liam.Howlett@oracle.com/

Link: https://lkml.kernel.org/r/20220918080010.2920238-11-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: minimal implementation

To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.

The aging produces young generations. Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq. Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.

The eviction consumes old generations. Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.

The protection of pages accessed multiple times through file descriptors
takes place in the eviction path. Each generation is divided into
multiple tiers. A page accessed N times through file descriptors is in
tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags. The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline. The first tier
contains single-use unmapped clean pages, which are most likely the best
choices. In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so. This
approach has the following advantages:

1. It removes the cost of activation in the buffered access path by
inferring whether pages accessed multiple times through file
descriptors are statistically hot and thus worth protecting in the
eviction path.
2. It takes pages accessed through page tables into account and avoids
overprotecting pages accessed multiple times through file
descriptors. (Pages accessed through page tables are in the first
tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
twice through file descriptors, when under heavy buffered I/O
workloads.

Server benchmark results:
Single workload:
fio (buffered I/O): +[30, 32]%
IOPS BW
5.19-rc1: 2673k 10.2GiB/s
patch1-6: 3491k 13.3GiB/s

Single workload:
memcached (anon): -[4, 6]%
Ops/sec KB/sec
5.19-rc1: 1161501.04 45177.25
patch1-6: 1106168.46 43025.04

Configurations:
CPU: two Xeon 6154
Mem: total 256G

Node 1 was only used as a ram disk to reduce the variance in the
results.

patch drivers/block/brd.c <<EOF
99,100c99,100
< gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
< page = alloc_page(gfp_flags);
---
> gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
> page = alloc_pages_node(1, gfp_flags, 0);
EOF

cat >>/etc/systemd/system.conf <<EOF
CPUAffinity=numa
NUMAPolicy=bind
NUMAMask=0
EOF

cat >>/etc/memcached.conf <<EOF
-m 184320
-s /var/run/memcached/memcached.sock
-a 0766
-t 36
-B binary
EOF

cat fio.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkfs.ext4 /dev/ram0
mount -t ext4 /dev/ram0 /mnt

mkdir /sys/fs/cgroup/user.slice/test
echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=5m --group_reporting

cat memcached.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0

memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000

memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed

Client benchmark results:
kswapd profiles:
5.19-rc1
40.33% page_vma_mapped_walk (overhead)
21.80% lzo1x_1_do_compress (real work)
7.53% do_raw_spin_lock
3.95% _raw_spin_unlock_irq
2.52% vma_interval_tree_iter_next
2.37% folio_referenced_one
2.28% vma_interval_tree_subtree_search
1.97% anon_vma_interval_tree_iter_first
1.60% ptep_clear_flush
1.06% __zram_bvec_write

patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next

Configurations:
CPU: single Snapdragon 7c
Mem: total 4G

ChromeOS MemoryPressure [1]

[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/

Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: groundwork

Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.

Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.

There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].

To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.

The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.

There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].

The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.

A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.

[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/

Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Revert "include/linux/mm_inline.h: fold __update_lru_size() into its sole caller"

This patch undoes the following refactor: commit 289ccba18af4
("include/linux/mm_inline.h: fold __update_lru_size() into its sole
caller")

The upcoming changes to include/linux/mm_inline.h will reuse
__update_lru_size().

Link: https://lkml.kernel.org/r/20220918080010.2920238-5-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/shmem: persist uffd-wp bit across zapping for file-backed

File-backed memory is prone to being unmapped at any time. It means all
information in the pte will be dropped, including the uffd-wp flag.

To persist the uffd-wp flag, we'll use the pte markers. This patch
teaches the zap code to understand uffd-wp and know when to keep or drop
the uffd-wp bit.

Add a new flag ZAP_FLAG_DROP_MARKER and set it in zap_details when we
don't want to persist such an information, for example, when destroying
the whole vma, or punching a hole in a shmem file. For the rest cases we
should never drop the uffd-wp bit, or the wr-protect information will get
lost.

The new ZAP_FLAG_DROP_MARKER needs to be put into mm.h rather than
memory.c because it'll be further referenced in hugetlb files later.

Link: https://lkml.kernel.org/r/20220405014847.14295-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/munlock: maintain page->mlock_count while unevictable

Previous patches have been preparatory: now implement page->mlock_count.
The ordering of the "Unevictable LRU" is of no significance, and there is
no point holding unevictable pages on a list: place page->mlock_count to
overlay page->lru.prev (since page->lru.next is overlaid by compound_head,
which needs to be even so as not to satisfy PageTail - though 2 could be
added instead of 1 for each mlock, if that's ever an improvement).

But it's only safe to rely on or modify page->mlock_count while lruvec
lock is held and page is on unevictable "LRU" - we can save lots of edits
by continuing to pretend that there's an imaginary LRU here (there is an
unevictable count which still needs to be maintained, but not a list).

The mlock_count technique suffers from an unreliability much like with
page_mlock(): while someone else has the page off LRU, not much can
be done. As before, err on the safe side (behave as if mlock_count 0),
and let try_to_unlock_one() move the page to unevictable if reclaim finds
out later on - a few misplaced pages don't matter, what we want to avoid
is imbalancing reclaim by flooding evictable lists with unevictable pages.

I am not a fan of "if (!isolate_lru_page(page)) putback_lru_page(page);":
if we have taken lruvec lock to get the page off its present list, then
we save everyone trouble (and however many extra atomic ops) by putting
it on its destination list immediately.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

mm: prevent vm_area_struct::anon_name refcount saturation

A deep process chain with many vmas could grow really high. With
default sysctl_max_map_count (64k) and default pid_max (32k) the max
number of vmas in the system is 2147450880 and the refcounter has
headroom of 1073774592 before it reaches REFCOUNT_SATURATED
(3221225472).

Therefore it's unlikely that an anonymous name refcounter will overflow
with these defaults. Currently the max for pid_max is PID_MAX_LIMIT
(4194304) and for sysctl_max_map_count it's INT_MAX (2147483647). In
this configuration anon_vma_name refcount overflow becomes theoretically
possible (that still require heavy sharing of that anon_vma_name between
processes).

kref refcounting interface used in anon_vma_name structure will detect a
counter overflow when it reaches REFCOUNT_SATURATED value but will only
generate a warning and freeze the ref counter. This would lead to the
refcounted object never being freed. A determined attacker could leak
memory like that but it would be rather expensive and inefficient way to
do so.

To ensure anon_vma_name refcount does not overflow, stop anon_vma_name
sharing when the refcount reaches REFCOUNT_MAX (2147483647), which still
leaves INT_MAX/2 (1073741823) values before the counter reaches
REFCOUNT_SATURATED. This should provide enough headroom for raising the
refcounts temporarily.

Link: https://lkml.kernel.org/r/20220223153613.835563-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Cross <ccross@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: refactor vm_area_struct::anon_vma_name usage code

Avoid mixing strings and their anon_vma_name referenced pointers by
using struct anon_vma_name whenever possible. This simplifies the code
and allows easier sharing of anon_vma_name structures when they
represent the same name.

[surenb@google.com: fix comment]

Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com
Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Colin Cross <ccross@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move tlb_flush_pending inline helpers to mm_inline.h

linux/mm_types.h should only define structure definitions, to make it
cheap to include elsewhere. The atomic_t helper function definitions
are particularly large, so it's better to move the helpers using those
into the existing linux/mm_inline.h and only include that where needed.

As a follow-up, we may want to go through all the indirect includes in
mm_types.h and reduce them as much as possible.

Link: https://lkml.kernel.org/r/20211207125710.2503446-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Colin Cross <ccross@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move anon_vma declarations to linux/mm_inline.h

The patch to add anonymous vma names causes a build failure in some
configurations:

include/linux/mm_types.h: In function 'is_same_vma_anon_name':
include/linux/mm_types.h:924:37: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
924 | return name && vma_name && !strcmp(name, vma_name);
| ^~~~~~
include/linux/mm_types.h:22:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?

This should not really be part of linux/mm_types.h in the first place,
as that header is meant to only contain structure defintions and need a
minimum set of indirect includes itself.

While the header clearly includes more than it should at this point,
let's not make it worse by including string.h as well, which would pull
in the expensive (compile-speed wise) fortify-string logic.

Move the new functions into a separate header that only needs to be
included in a couple of locations.

Link: https://lkml.kernel.org/r/20211207125710.2503446-1-arnd@kernel.org
Fixes: "mm: add a field to store names for private anonymous memory"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@google.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/lru: Add folio LRU functions

Handle arbitrary-order folios being added to the LRU. By definition,
all pages being added to the LRU were already head or base pages, but
call page_folio() on them anyway to get the type right and avoid the
buried calls to compound_head().

Saves 783 bytes of kernel text; no functions grow.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>

include/linux/mm_inline.h: fold __update_lru_size() into its sole caller

All other references to the function were removed after commit
a892cb6b977f ("mm/vmscan.c: use update_lru_size() in update_lru_sizes()").

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-10-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-10-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm_inline.h: fold page_lru_base_type() into its sole caller

We've removed all other references to this function.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-9-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: VM_BUG_ON lru page flags

Move scattered VM_BUG_ONs to two essential places that cover all
lru list additions and deletions.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-8-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add __clear_page_lru_flags() to replace page_off_lru()

Similar to page_off_lru(), the new function does non-atomic clearing
of PageLRU() in addition to PageActive() and PageUnevictable(), on a
page that has no references left.

If PageActive() and PageUnevictable() are both set, refuse to clear
either and leave them to bad_page(). This is a behavior change that
is meant to help debug.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-7-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c: don't pass "enum lru_list" to del_page_from_lru_list()

The parameter is redundant in the sense that it can be potentially
extracted from the "struct page" parameter by page_lru(). We need to
make sure that existing PageActive() or PageUnevictable() remains
until the function returns. A few places don't conform, and simple
reordering fixes them.

This patch may have left page_off_lru() seemingly odd, and we'll take
care of it in the next patch.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-6-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't pass "enum lru_list" to lru list addition functions

The "enum lru_list" parameter to add_page_to_lru_list() and
add_page_to_lru_list_tail() is redundant in the sense that it can
be extracted from the "struct page" parameter by page_lru().

A caveat is that we need to make sure PageActive() or
PageUnevictable() is correctly set or cleared before calling
these two functions. And they are indeed.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-4-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm_inline.h: shuffle lru list addition and deletion functions

These functions will call page_lru() in the following patches. Move them
below page_lru() to avoid the forward declaration.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-3-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: replace hpage_nr_pages with thp_nr_pages

The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.

[akpm@linux-foundation.org: fix mm/migrate.c]

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: code cleanup for MADV_FREE

Some comments for MADV_FREE is revised and added to help people understand
the MADV_FREE code, especially the page flag, PG_swapbacked. This makes
page_is_file_cache() isn't consistent with its comments. So the function
is renamed to page_is_file_lru() to make them consistent again. All these
are put in one patch as one logical change.

Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: David Rientjes <rientjes@google.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200317100342.2730705-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: track LRU counts in the vmstats array

Patch series "mm: memcontrol: clean up the LRU counts tracking".

The memcg LRU stats usage is currently a bit messy. Memcg has private
per-zone counters because reclaim needs zone granularity sometimes, but we
also have plenty of users that need to awkwardly sum them up to node or
memcg granularity. Meanwhile the canonical per-memcg vmstats do not track
the LRU counts (NR_INACTIVE_ANON etc.) as you'd expect.

This series enables LRU count tracking in the per-memcg vmstats array such
that lruvec_page_state() and memcg_page_state() work on the enum
node_stat_item items for the LRU counters. Then it converts all the
callers that don't specifically need per-zone numbers over to that.

This patch (of 6):

The memcg code currently maintains private per-zone breakdowns of the LRU
counters. This is necessary for reclaim decisions which are still
zone-based, but there are a variety of users of these counters that only
want the aggregate per-lruvec or per-memcg LRU counts, and they need to
painfully sum up the zone counters on each request for that.

These would be better served using the memcg vmstats arrays, which track
VM statistics at the desired scope already. They just don't have the LRU
counts right now.

So to kick off the conversion, begin tracking LRU counts in those.

Link: http://lkml.kernel.org/r/20190228163020.24100-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: don't open code lru_to_page()

Multiple filesystems open code lru_to_page(). Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.

No functional changes.

Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com> [ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages

In the following commit:

ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages")

... we added code to memory_failure() to unmap the page from the
kernel 1:1 virtual address space to avoid speculative access to the
page logging additional errors.

But memory_failure() may not always succeed in taking the page offline,
especially if the page belongs to the kernel. This can happen if
there are too many corrected errors on a page and either mcelog(8)
or drivers/ras/cec.c asks to take a page offline.

Since we remove the 1:1 mapping early in memory_failure(), we can
end up with the page unmapped, but still in use. On the next access
the kernel crashes :-(

There are also various debug paths that call memory_failure() to simulate
occurrence of an error. Since there is no actual error in memory, we
don't need to map out the page for those cases.

Revert most of the previous attempt and keep the solution local to
arch/x86/kernel/cpu/mcheck/mce.c. Unmap the page only when:

1) there is a real error
2) memory_failure() succeeds.

All of this only applies to 64-bit systems. 32-bit kernel doesn't map
all of memory into kernel space. It isn't worth adding the code to unmap
the piece that is mapped because nobody would run a 32-bit kernel on a
machine that has recoverable machine checks.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert (Persistent Memory) <elliott@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: stable@vger.kernel.org #v4.14
Fixes: ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages

Speculative processor accesses may reference any memory that has a
valid page table entry. While a speculative access won't generate
a machine check, it will log the error in a machine check bank. That
could cause escalation of a subsequent error since the overflow bit
will be then set in the machine check bank status register.

Code has to be double-plus-tricky to avoid mentioning the 1:1 virtual
address of the page we want to map out otherwise we may trigger the
very problem we are trying to avoid. We use a non-canonical address
that passes through the usual Linux table walking code to get to the
same "pte".

Thanks to Dave Hansen for reviewing several iterations of this.

Also see:

http://marc.info/?l=linux-mm&m=149860136413338&w=2

Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott, Robert (Persistent Memory) <elliott@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170816171803.28342-1-tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

mm: vmscan: move dirty pages out of the way until they're flushed

We noticed a performance regression when moving hadoop workloads from
3.10 kernels to 4.0 and 4.6. This is accompanied by increased pageout
activity initiated by kswapd as well as frequent bursts of allocation
stalls and direct reclaim scans. Even lowering the dirty ratios to the
equivalent of less than 1% of memory would not eliminate the issue,
suggesting that dirty pages concentrate where the scanner is looking.

This can be traced back to recent efforts of thrash avoidance. Where
3.10 would not detect refaulting pages and continuously supply clean
cache to the inactive list, a thrashing workload on 4.0+ will detect and
activate refaulting pages right away, distilling used-once pages on the
inactive list much more effectively. This is by design, and it makes
sense for clean cache. But for the most part our workload's cache
faults are refaults and its use-once cache is from streaming writes. We
end up with most of the inactive list dirty, and we don't go after the
active cache as long as we have use-once pages around.

But waiting for writes to avoid reclaiming clean cache that *might*
refault is a bad trade-off. Even if the refaults happen, reads are
faster than writes. Before getting bogged down on writeback, reclaim
should first look at *all* cache in the system, even active cache.

To accomplish this, activate pages that are dirty or under writeback
when they reach the end of the inactive LRU. The pages are marked for
immediate reclaim, meaning they'll get moved back to the inactive LRU
tail as soon as they're written back and become reclaimable. But in the
meantime, by reducing the inactive list to only immediately reclaimable
pages, we allow the scanner to deactivate and refill the inactive list
with clean cache from the active list tail to guarantee forward
progress.

[hannes@cmpxchg.org: update comment]
Link: http://lkml.kernel.org/r/20170202191957.22872-8-hannes@cmpxchg.org
Link: http://lkml.kernel.org/r/20170123181641.23938-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memcg: fix the active list aging for lowmem requests when memcg is enabled

Nils Holland and Klaus Ethgen have reported unexpected OOM killer
invocations with 32b kernel starting with 4.8 kernels

kworker/u4:5 invoked oom-killer: gfp_mask=0x2400840(GFP_NOFS|__GFP_NOFAIL), nodemask=0, order=0, oom_score_adj=0
kworker/u4:5 cpuset=/ mems_allowed=0
CPU: 1 PID: 2603 Comm: kworker/u4:5 Not tainted 4.9.0-gentoo #2
[...]
Mem-Info:
active_anon:58685 inactive_anon:90 isolated_anon:0
active_file:274324 inactive_file:281962 isolated_file:0
unevictable:0 dirty:649 writeback:0 unstable:0
slab_reclaimable:40662 slab_unreclaimable:17754
mapped:7382 shmem:202 pagetables:351 bounce:0
free:206736 free_pcp:332 free_cma:0
Node 0 active_anon:234740kB inactive_anon:360kB active_file:1097296kB inactive_file:1127848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:29528kB dirty:2596kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 184320kB anon_thp: 808kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
DMA free:3952kB min:788kB low:984kB high:1180kB active_anon:0kB inactive_anon:0kB active_file:7316kB inactive_file:0kB unevictable:0kB writepending:96kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:3200kB slab_unreclaimable:1408kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 813 3474 3474
Normal free:41332kB min:41368kB low:51708kB high:62048kB active_anon:0kB inactive_anon:0kB active_file:532748kB inactive_file:44kB unevictable:0kB writepending:24kB present:897016kB managed:836248kB mlocked:0kB slab_reclaimable:159448kB slab_unreclaimable:69608kB kernel_stack:1112kB pagetables:1404kB bounce:0kB free_pcp:528kB local_pcp:340kB free_cma:0kB
lowmem_reserve[]: 0 0 21292 21292
HighMem free:781660kB min:512kB low:34356kB high:68200kB active_anon:234740kB inactive_anon:360kB active_file:557232kB inactive_file:1127804kB unevictable:0kB writepending:2592kB present:2725384kB managed:2725384kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:800kB local_pcp:608kB free_cma:0kB

the oom killer is clearly pre-mature because there there is still a lot
of page cache in the zone Normal which should satisfy this lowmem
request. Further debugging has shown that the reclaim cannot make any
forward progress because the page cache is hidden in the active list
which doesn't get rotated because inactive_list_is_low is not memcg
aware.

The code simply subtracts per-zone highmem counters from the respective
memcg's lru sizes which doesn't make any sense. We can simply end up
always seeing the resulting active and inactive counts 0 and return
false. This issue is not limited to 32b kernels but in practice the
effect on systems without CONFIG_HIGHMEM would be much harder to notice
because we do not invoke the OOM killer for allocations requests
targeting < ZONE_NORMAL.

Fix the issue by tracking per zone lru page counts in mem_cgroup_per_node
and subtract per-memcg highmem counts when memcg is enabled. Introduce
helper lruvec_zone_lru_size which redirects to either zone counters or
mem_cgroup_get_zone_lru_size when appropriate.

We are losing empty LRU but non-zero lru size detection introduced by
ca707239e8a7 ("mm: update_lru_size warn and reset bad lru_size") because
of the inherent zone vs. node discrepancy.

Fixes: f8d1a31163fc ("mm: consider whether to decivate based on eligible zones inactive ratio")
Link: http://lkml.kernel.org/r/20170104100825.3729-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Nils Holland <nholland@tisys.org>
Tested-by: Nils Holland <nholland@tisys.org>
Reported-by: Klaus Ethgen <Klaus@Ethgen.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmscan: remove highmem_file_pages

With the reintroduction of per-zone LRU stats, highmem_file_pages is
redundant so remove it.

[mgorman@techsingularity.net: wrong stat is being accumulated in highmem_dirtyable_memory]
Link: http://lkml.kernel.org/r/20160725092324.GM10438@techsingularity.netLink: http://lkml.kernel.org/r/1469110261-7365-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add per-zone lru list stat

When I did stress test with hackbench, I got OOM message frequently
which didn't ever happen in zone-lru.

gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0
..
..
__alloc_pages_nodemask+0xe52/0xe60
? new_slab+0x39c/0x3b0
new_slab+0x39c/0x3b0
___slab_alloc.constprop.87+0x6da/0x840
? __alloc_skb+0x3c/0x260
? _raw_spin_unlock_irq+0x27/0x60
? trace_hardirqs_on_caller+0xec/0x1b0
? finish_task_switch+0xa6/0x220
? poll_select_copy_remaining+0x140/0x140
__slab_alloc.isra.81.constprop.86+0x40/0x6d
? __alloc_skb+0x3c/0x260
kmem_cache_alloc+0x22c/0x260
? __alloc_skb+0x3c/0x260
__alloc_skb+0x3c/0x260
alloc_skb_with_frags+0x4e/0x1a0
sock_alloc_send_pskb+0x16a/0x1b0
? wait_for_unix_gc+0x31/0x90
? alloc_set_pte+0x2ad/0x310
unix_stream_sendmsg+0x28d/0x340
sock_sendmsg+0x2d/0x40
sock_write_iter+0x6c/0xc0
__vfs_write+0xc0/0x120
vfs_write+0x9b/0x1a0
? __might_fault+0x49/0xa0
SyS_write+0x44/0x90
do_fast_syscall_32+0xa6/0x1e0
sysenter_past_esp+0x45/0x74

Mem-Info:
active_anon:104698 inactive_anon:105791 isolated_anon:192
active_file:433 inactive_file:283 isolated_file:22
unevictable:0 dirty:0 writeback:296 unstable:0
slab_reclaimable:6389 slab_unreclaimable:78927
mapped:474 shmem:0 pagetables:101426 bounce:0
free:10518 free_pcp:334 free_cma:0
Node 0 active_anon:418792kB inactive_anon:423164kB active_file:1732kB inactive_file:1132kB unevictable:0kB isolated(anon):768kB isolated(file):88kB mapped:1896kB dirty:0kB writeback:1184kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1478632 all_unreclaimable? yes
DMA free:3304kB min:68kB low:84kB high:100kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:4088kB kernel_stack:0kB pagetables:2480kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 809 1965 1965
Normal free:3436kB min:3604kB low:4504kB high:5404kB present:897016kB managed:858460kB mlocked:0kB slab_reclaimable:25556kB slab_unreclaimable:311712kB kernel_stack:164608kB pagetables:30844kB bounce:0kB free_pcp:620kB local_pcp:104kB free_cma:0kB
lowmem_reserve[]: 0 0 9247 9247
HighMem free:33808kB min:512kB low:1796kB high:3080kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:372252kB bounce:0kB free_pcp:428kB local_pcp:72kB free_cma:0kB
lowmem_reserve[]: 0 0 0 0
DMA: 2*4kB (UM) 2*8kB (UM) 0*16kB 1*32kB (U) 1*64kB (U) 2*128kB (UM) 1*256kB (U) 1*512kB (M) 0*1024kB 1*2048kB (U) 0*4096kB = 3192kB
Normal: 33*4kB (MH) 79*8kB (ME) 11*16kB (M) 4*32kB (M) 2*64kB (ME) 2*128kB (EH) 7*256kB (EH) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3244kB
HighMem: 2590*4kB (UM) 1568*8kB (UM) 491*16kB (UM) 60*32kB (UM) 6*64kB (M) 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 33064kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
25121 total pagecache pages
24160 pages in swap cache
Swap cache stats: add 86371, delete 62211, find 42865/60187
Free swap = 4015560kB
Total swap = 4192252kB
524186 pages RAM
295934 pages HighMem/MovableOnly
9658 pages reserved
0 pages cma reserved

The order-0 allocation for normal zone failed while there are a lot of
reclaimable memory(i.e., anonymous memory with free swap). I wanted to
analyze the problem but it was hard because we removed per-zone lru stat
so I couldn't know how many of anonymous memory there are in normal/dma
zone.

When we investigate OOM problem, reclaimable memory count is crucial
stat to find a problem. Without it, it's hard to parse the OOM message
so I believe we should keep it.

With per-zone lru stat,

gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0
Mem-Info:
active_anon:101103 inactive_anon:102219 isolated_anon:0
active_file:503 inactive_file:544 isolated_file:0
unevictable:0 dirty:0 writeback:34 unstable:0
slab_reclaimable:6298 slab_unreclaimable:74669
mapped:863 shmem:0 pagetables:100998 bounce:0
free:23573 free_pcp:1861 free_cma:0
Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes
DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 809 1965 1965
Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB
lowmem_reserve[]: 0 0 9247 9247
HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB
lowmem_reserve[]: 0 0 0 0
DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB
Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB
HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
54409 total pagecache pages
53215 pages in swap cache
Swap cache stats: add 300982, delete 247765, find 157978/226539
Free swap = 3803244kB
Total swap = 4192252kB
524186 pages RAM
295934 pages HighMem/MovableOnly
9642 pages reserved
0 pages cma reserved

With that, we can see normal zone has a 86M reclaimable memory so we can
know something goes wrong(I will fix the problem in next patch) in
reclaim.

[mgorman@techsingularity.net: rename zone LRU stats in /proc/vmstat]
Link: http://lkml.kernel.org/r/20160725072300.GK10438@techsingularity.net
Link: http://lkml.kernel.org/r/1469110261-7365-2-git-send-email-mgorman@techsingularity.net
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmscan: Update all zone LRU sizes before updating memcg

Minchan Kim reported setting the following warning on a 32-bit system
although it can affect 64-bit systems.

WARNING: CPU: 4 PID: 1322 at mm/memcontrol.c:998 mem_cgroup_update_lru_size+0x103/0x110
mem_cgroup_update_lru_size(f44b4000, 1, -7): zid 1 lru_size 1 but empty
Modules linked in:
CPU: 4 PID: 1322 Comm: cp Not tainted 4.7.0-rc4-mm1+ #143
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x76/0xaf
__warn+0xea/0x110
? mem_cgroup_update_lru_size+0x103/0x110
warn_slowpath_fmt+0x3b/0x40
mem_cgroup_update_lru_size+0x103/0x110
isolate_lru_pages.isra.61+0x2e2/0x360
shrink_active_list+0xac/0x2a0
? __delay+0xe/0x10
shrink_node_memcg+0x53c/0x7a0
shrink_node+0xab/0x2a0
do_try_to_free_pages+0xc6/0x390
try_to_free_pages+0x245/0x590

LRU list contents and counts are updated separately. Counts are updated
before pages are added to the LRU and updated after pages are removed.
The warning above is from a check in mem_cgroup_update_lru_size that
ensures that list sizes of zero are empty.

The problem is that node-lru needs to account for highmem pages if
CONFIG_HIGHMEM is set. One impact of the implementation is that the
sizes are updated in multiple passes when pages from multiple zones were
isolated. This happens whether HIGHMEM is set or not. When multiple
zones are isolated, it's possible for a debugging check in memcg to be
tripped.

This patch forces all the zone counts to be updated before the memcg
function is called.

Link: http://lkml.kernel.org/r/1468588165-12461-6-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Minchan Kim <minchan@kernel.org>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmstat: remove zone and node double accounting by approximating retries

The number of LRU pages, dirty pages and writeback pages must be
accounted for on both zones and nodes because of the reclaim retry
logic, compaction retry logic and highmem calculations all depending on
per-zone stats.

Many lowmem allocations are immune from OOM kill due to a check in
__alloc_pages_may_oom for (ac->high_zoneidx < ZONE_NORMAL) since commit
03668b3ceb0c ("oom: avoid oom killer for lowmem allocations"). The
exception is costly high-order allocations or allocations that cannot
fail. If the __alloc_pages_may_oom avoids OOM-kill for low-order lowmem
allocations then it would fall through to __alloc_pages_direct_compact.

This patch will blindly retry reclaim for zone-constrained allocations
in should_reclaim_retry up to MAX_RECLAIM_RETRIES. This is not ideal
but without per-zone stats there are not many alternatives. The impact
it that zone-constrained allocations may delay before considering the
OOM killer.

As there is no guarantee enough memory can ever be freed to satisfy
compaction, this patch avoids retrying compaction for zone-contrained
allocations.

In combination, that means that the per-node stats can be used when
deciding whether to continue reclaim using a rough approximation. While
it is possible this will make the wrong decision on occasion, it will
not infinite loop as the number of reclaim attempts is capped by
MAX_RECLAIM_RETRIES.

The final step is calculating the number of dirtyable highmem pages. As
those calculations only care about the global count of file pages in
highmem. This patch uses a global counter used instead of per-zone
stats as it is sufficient.

In combination, this allows the per-zone LRU and dirty state counters to
be removed.

[mgorman@techsingularity.net: fix acct_highmem_file_pages()]
Link: http://lkml.kernel.org/r/1468853426-12858-4-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-35-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested by: Michal Hocko <mhocko@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, vmscan: move LRU lists to node

This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.

Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic. Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes. It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.

Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies. For example, the scans are
per-zone but using per-node counters. We also mark a node as congested
when a zone is congested. This causes weird problems that are fixed
later but is easier to review.

In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions

1. Long-term isolation of highmem pages when reclaim is lowmem

When pages are skipped, they are immediately added back onto the LRU
list. If lowmem reclaim persisted for long periods of time, the same
highmem pages get continually scanned. The idea would be that lowmem
keeps those pages on a separate list until a reclaim for highmem pages
arrives that splices the highmem pages back onto the LRU. It potentially
could be implemented similar to the UNEVICTABLE list.

That would reduce the skip rate with the potential corner case is that
highmem pages have to be scanned and reclaimed to free lowmem slab pages.

2. Linear scan lowmem pages if the initial LRU shrink fails

This will break LRU ordering but may be preferable and faster during
memory pressure than skipping LRU pages.

Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: update_lru_size do the __mod_zone_page_state

Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy
reclaim was removed) that lru_size can be updated by -nr_taken once per
call to isolate_lru_pages(), instead of page by page.

Update it inside isolate_lru_pages(), or at its two callsites? I chose
to update it at the callsites, rearranging and grouping the updates by
nr_taken and nr_scanned together in both.

With one exception, mem_cgroup_update_lru_size(,lru,) is then used where
__mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding
some more calls in a future commit. Make the code a little smaller and
simpler by incorporating stat update in lru_size update.

The exception was move_active_pages_to_lru(), which aggregated the
pgmoved stat update separately from the individual lru_size updates; but
I still think this a simplification worth making.

However, the __mod_zone_page_state is not peculiar to mem_cgroups: so
better use the name update_lru_size, calls mem_cgroup_update_lru_size
when CONFIG_MEMCG.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: update_lru_size warn and reset bad lru_size

Though debug kernels have a VM_BUG_ON to help protect from misaccounting
lru_size, non-debug kernels are liable to wrap it around: and then the
vast unsigned long size draws page reclaim into a loop of repeatedly
doing nothing on an empty list, without even a cond_resched().

That soft lockup looks confusingly like an over-busy reclaim scenario,
with lots of contention on the lru_lock in shrink_inactive_list(): yet
has a totally different origin.

Help differentiate with a custom warning in
mem_cgroup_update_lru_size(), even in non-debug kernels; and reset the
size to avoid the lockup. But the particular bug which suggested this
change was mine alone, and since fixed.

Make it a WARN_ONCE: the first occurrence is the most informative, a
flurry may follow, yet even when rate-limited little more is learnt.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move lru_to_page to mm_inline.h

Move lru_to_page() from internal.h to mm_inline.h.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: fix do_try_to_free_pages() livelock

This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.

Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment. This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:

kswapd will go to sleep if the zones have been fully scanned and are still
not balanced. As kswapd thinks there's little point trying all over again
to avoid infinite loop. Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important. Look at
73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0. It assume high-order users
can still perform direct reclaim if they wish.

Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= . This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.

In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process. As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737

We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy. Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.

Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable. Because, it
is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.

[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lisa Du <cldu@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: apply add/del_page to lruvec

Take lruvec further: pass it instead of zone to add_page_to_lru_list() and
del_page_from_lru_list(); and pagevec_lru_move_fn() pass lruvec down to
its target functions.

This cleanup eliminates a swathe of cruft in memcontrol.c, including
mem_cgroup_lru_add_list(), mem_cgroup_lru_del_list() and
mem_cgroup_lru_move_lists() - which never actually touched the lists.

In their place, mem_cgroup_page_lruvec() to decide the lruvec, previously
a side-effect of add, and mem_cgroup_update_lru_size() to maintain the
lru_size stats.

Whilst these are simplifications in their own right, the goal is to bring
the evaluation of lruvec next to the spin_locking of the lrus, in
preparation for a future patch.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mark mm-inline functions as __always_inline

GCC sometimes ignores "inline" directives even for small and simple functions.
This supposed to be fixed in gcc 4.7, but it was released only yesterday.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove del_page_from_lru, add page_off_lru

del_page_from_lru() repeats del_page_from_lru_list(), also working out
which LRU the page was on, clearing the relevant bits. Decouple those
functions: remove del_page_from_lru() and add page_off_lru().

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: enum lru_list lru

Mostly we use "enum lru_list lru": change those few "l"s to "lru"s.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make per-memcg LRU lists exclusive

Now that all code that operated on global per-zone LRU lists is
converted to operate on per-memory cgroup LRU lists instead, there is no
reason to keep the double-LRU scheme around any longer.

The pc->lru member is removed and page->lru is linked directly to the
per-memory cgroup LRU lists, which removes two pointers from a
descriptor that exists for every page frame in the system.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: collect LRU list heads into struct lruvec

Having a unified structure with a LRU list set for both global zones and
per-memcg zones allows to keep that code simple which deals with LRU
lists and does not care about the container itself.

Once the per-memcg LRU lists directly link struct pages, the isolation
function and all other list manipulations are shared between the memcg
case and the global LRU case.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix anon memory statistics with transparent hugepages

Count each transparent hugepage as HPAGE_PMD_NR pages in the LRU
statistics, so the Active(anon) and Inactive(anon) statistics in
/proc/meminfo are correct.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: transparent hugepage core

Lately I've been working to make KVM use hugepages transparently without
the usual restrictions of hugetlbfs. Some of the restrictions I'd like to
see removed:

1) hugepages have to be swappable or the guest physical memory remains
locked in RAM and can't be paged out to swap

2) if a hugepage allocation fails, regular pages should be allocated
instead and mixed in the same vma without any failure and without
userland noticing

3) if some task quits and more hugepages become available in the
buddy, guest physical memory backed by regular pages should be
relocated on hugepages automatically in regions under
madvise(MADV_HUGEPAGE) (ideally event driven by waking up the
kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes
not null)

4) avoidance of reservation and maximization of use of hugepages whenever
possible. Reservation (needed to avoid runtime fatal faliures) may be ok for
1 machine with 1 database with 1 database cache with 1 database cache size
known at boot time. It's definitely not feasible with a virtualization
hypervisor usage like RHEV-H that runs an unknown number of virtual machines
with an unknown size of each virtual machine with an unknown amount of
pagecache that could be potentially useful in the host for guest not using
O_DIRECT (aka cache=off).

hugepages in the virtualization hypervisor (and also in the guest!) are
much more important than in a regular host not using virtualization,
becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24
to 19 in case only the hypervisor uses transparent hugepages, and they
decrease the tlb-miss cacheline accesses from 19 to 15 in case both the
linux hypervisor and the linux guest both uses this patch (though the
guest will limit the addition speedup to anonymous regions only for
now...). Even more important is that the tlb miss handler is much slower
on a NPT/EPT guest than for a regular shadow paging or no-virtualization
scenario. So maximizing the amount of virtual memory cached by the TLB
pays off significantly more with NPT/EPT than without (even if there would
be no significant speedup in the tlb-miss runtime).

The first (and more tedious) part of this work requires allowing the VM to
handle anonymous hugepages mixed with regular pages transparently on
regular anonymous vmas. This is what this patch tries to achieve in the
least intrusive possible way. We want hugepages and hugetlb to be used in
a way so that all applications can benefit without changes (as usual we
leverage the KVM virtualization design: by improving the Linux VM at
large, KVM gets the performance boost too).

The most important design choice is: always fallback to 4k allocation if
the hugepage allocation fails! This is the _very_ opposite of some large
pagecache patches that failed with -EIO back then if a 64k (or similar)
allocation failed...

Second important decision (to reduce the impact of the feature on the
existing pagetable handling code) is that at any time we can split an
hugepage into 512 regular pages and it has to be done with an operation
that can't fail. This way the reliability of the swapping isn't decreased
(no need to allocate memory when we are short on memory to swap) and it's
trivial to plug a split_huge_page* one-liner where needed without
polluting the VM. Over time we can teach mprotect, mremap and friends to
handle pmd_trans_huge natively without calling split_huge_page*. The fact
it can't fail isn't just for swap: if split_huge_page would return -ENOMEM
(instead of the current void) we'd need to rollback the mprotect from the
middle of it (ideally including undoing the split_vma) which would be a
big change and in the very wrong direction (it'd likely be simpler not to
call split_huge_page at all and to teach mprotect and friends to handle
hugepages instead of rolling them back from the middle). In short the
very value of split_huge_page is that it can't fail.

The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and
incremental and it'll just be an "harmless" addition later if this initial
part is agreed upon. It also should be noted that locking-wise replacing
regular pages with hugepages is going to be very easy if compared to what
I'm doing below in split_huge_page, as it will only happen when
page_count(page) matches page_mapcount(page) if we can take the PG_lock
and mmap_sem in write mode. collapse_huge_page will be a "best effort"
that (unlike split_huge_page) can fail at the minimal sign of trouble and
we can try again later. collapse_huge_page will be similar to how KSM
works and the madvise(MADV_HUGEPAGE) will work similar to
madvise(MADV_MERGEABLE).

The default I like is that transparent hugepages are used at page fault
time. This can be changed with
/sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set
to three values "always", "madvise", "never" which mean respectively that
hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions,
or never used. /sys/kernel/mm/transparent_hugepage/defrag instead
controls if the hugepage allocation should defrag memory aggressively
"always", only inside "madvise" regions, or "never".

The pmd_trans_splitting/pmd_trans_huge locking is very solid. The
put_page (from get_user_page users that can't use mmu notifier like
O_DIRECT) that runs against a __split_huge_page_refcount instead was a
pain to serialize in a way that would result always in a coherent page
count for both tail and head. I think my locking solution with a
compound_lock taken only after the page_first is valid and is still a
PageHead should be safe but it surely needs review from SMP race point of
view. In short there is no current existing way to serialize the O_DIRECT
final put_page against split_huge_page_refcount so I had to invent a new
one (O_DIRECT loses knowledge on the mapping status by the time gup_fast
returns so...). And I didn't want to impact all gup/gup_fast users for
now, maybe if we change the gup interface substantially we can avoid this
locking, I admit I didn't think too much about it because changing the gup
unpinning interface would be invasive.

If we ignored O_DIRECT we could stick to the existing compound refcounting
code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM
(and any other mmu notifier user) would call it without FOLL_GET (and if
FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the
current task mmu notifier list yet). But O_DIRECT is fundamental for
decent performance of virtualized I/O on fast storage so we can't avoid it
to solve the race of put_page against split_huge_page_refcount to achieve
a complete hugepage feature for KVM.

Swap and oom works fine (well just like with regular pages ;). MMU
notifier is handled transparently too, with the exception of the young bit
on the pmd, that didn't have a range check but I think KVM will be fine
because the whole point of hugepages is that EPT/NPT will also use a huge
pmd when they notice gup returns pages with PageCompound set, so they
won't care of a range and there's just the pmd young bit to check in that
case.

NOTE: in some cases if the L2 cache is small, this may slowdown and waste
memory during COWs because 4M of memory are accessed in a single fault
instead of 8k (the payoff is that after COW the program can run faster).
So we might want to switch the copy_huge_page (and clear_huge_page too) to
not temporal stores. I also extensively researched ways to avoid this
cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k
up to 1M (I can send those patches that fully implemented prefault) but I
concluded they're not worth it and they add an huge additional complexity
and they remove all tlb benefits until the full hugepage has been faulted
in, to save a little bit of memory and some cache during app startup, but
they still don't improve substantially the cache-trashing during startup
if the prefault happens in >4k chunks. One reason is that those 4k pte
entries copied are still mapped on a perfectly cache-colored hugepage, so
the trashing is the worst one can generate in those copies (cow of 4k page
copies aren't so well colored so they trashes less, but again this results
in software running faster after the page fault). Those prefault patches
allowed things like a pte where post-cow pages were local 4k regular anon
pages and the not-yet-cowed pte entries were pointing in the middle of
some hugepage mapped read-only. If it doesn't payoff substantially with
todays hardware it will payoff even less in the future with larger l2
caches, and the prefault logic would blot the VM a lot. If one is
emebdded transparent_hugepage can be disabled during boot with sysfs or
with the boot commandline parameter transparent_hugepage=0 (or
transparent_hugepage=2 to restrict hugepages inside madvise regions) that
will ensure not a single hugepage is allocated at boot time. It is simple
enough to just disable transparent hugepage globally and let transparent
hugepages be allocated selectively by applications in the MADV_HUGEPAGE
region (both at page fault time, and if enabled with the
collapse_huge_page too through the kernel daemon).

This patch supports only hugepages mapped in the pmd, archs that have
smaller hugepages will not fit in this patch alone. Also some archs like
power have certain tlb limits that prevents mixing different page size in
the same regions so they will not fit in this framework that requires
"graceful fallback" to basic PAGE_SIZE in case of physical memory
fragmentation. hugetlbfs remains a perfect fit for those because its
software limits happen to match the hardware limits. hugetlbfs also
remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped
to be found not fragmented after a certain system uptime and that would be
very expensive to defragment with relocation, so requiring reservation.
hugetlbfs is the "reservation way", the point of transparent hugepages is
not to have any reservation at all and maximizing the use of cache and
hugepages at all times automatically.

Some performance result:

vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep
ages3
memset page fault 1566023
memset tlb miss 453854
memset second tlb miss 453321
random access tlb miss 41635
random access second tlb miss 41658
vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3
memset page fault 1566471
memset tlb miss 453375
memset second tlb miss 453320
random access tlb miss 41636
random access second tlb miss 41637
vmx andrea # ./largepages3
memset page fault 1566642
memset tlb miss 453417
memset second tlb miss 453313
random access tlb miss 41630
random access second tlb miss 41647
vmx andrea # ./largepages3
memset page fault 1566872
memset tlb miss 453418
memset second tlb miss 453315
random access tlb miss 41618
random access second tlb miss 41659
vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage
vmx andrea # ./largepages3
memset page fault 2182476
memset tlb miss 460305
memset second tlb miss 460179
random access tlb miss 44483
random access second tlb miss 44186
vmx andrea # ./largepages3
memset page fault 2182791
memset tlb miss 460742
memset second tlb miss 459962
random access tlb miss 43981
random access second tlb miss 43988

============
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>

#define SIZE (3UL*1024*1024*1024)

int main()
{
char *p = malloc(SIZE), *p2;
struct timeval before, after;

gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset page fault %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);

gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);

gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset second tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);

gettimeofday(&before, NULL);
for (p2 = p; p2 < p+SIZE; p2 += 4096)
*p2 = 0;
gettimeofday(&after, NULL);
printf("random access tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);

gettimeofday(&before, NULL);
for (p2 = p; p2 < p+SIZE; p2 += 4096)
*p2 = 0;
gettimeofday(&after, NULL);
printf("random access second tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);

return 0;
}
============

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: return boolean from page_is_file_cache()

page_is_file_cache() has been used for both boolean checks and LRU
arithmetic, which was always a bit weird.

Now that page_lru_base_type() exists for LRU arithmetic, make
page_is_file_cache() a real predicate function and adjust the
boolean-using callsites to drop those pesky double negations.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: introduce page_lru_base_type()

Instead of abusing page_is_file_cache() for LRU list index arithmetic, add
another helper with a more appropriate name and convert the non-boolean
users of page_is_file_cache() accordingly.

This new helper gives the LRU base type a page is supposed to live on,
inactive anon or inactive file.

[hugh.dickins@tiscali.co.uk: convert del_page_from_lru() also]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inactive_anon_is_low: move to vmscan

The inactive_anon_is_low() is called only vmscan. Then it can move to
vmscan.c

This patch doesn't have any functional change.

Reviewd-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: synchronized LRU

A big patch for changing memcg's LRU semantics.

Now,
- page_cgroup is linked to mem_cgroup's its own LRU (per zone).

- LRU of page_cgroup is not synchronous with global LRU.

- page and page_cgroup is one-to-one and statically allocated.

- To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as
- lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc);

- SwapCache is handled.

And, when we handle LRU list of page_cgroup, we do following.

pc = lookup_page_cgroup(page);
lock_page_cgroup(pc); .....................(1)
mz = page_cgroup_zoneinfo(pc);
spin_lock(&mz->lru_lock);
.....add to LRU
spin_unlock(&mz->lru_lock);
unlock_page_cgroup(pc);

But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock.
So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct.

This is a trial to remove this dirty nesting of locks.
This patch changes mz->lru_lock to be zone->lru_lock.
Then, above sequence will be written as

spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU
mem_cgroup_add/remove/etc_lru() {
pc = lookup_page_cgroup(page);
mz = page_cgroup_zoneinfo(pc);
if (PageCgroupUsed(pc)) {
....add to LRU
}
spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU

This is much simpler.
(*) We're safe even if we don't take lock_page_cgroup(pc). Because..
1. When pc->mem_cgroup can be modified.
- at charge.
- at account_move().
2. at charge
the PCG_USED bit is not set before pc->mem_cgroup is fixed.
3. at account_move()
the page is isolated and not on LRU.

Pros.
- easy for maintenance.
- memcg can make use of laziness of pagevec.
- we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup.
- LRU status of memcg will be synchronized with global LRU's one.
- # of locks are reduced.
- account_move() is simplified very much.
Cons.
- may increase cost of LRU rotation.
(no impact if memcg is not configured.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: kill unused lru functions

Several LRU manupuration function are not used now. So they can be
removed.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Unevictable LRU Infrastructure

When the system contains lots of mlocked or otherwise unevictable pages,
the pageout code (kswapd) can spend lots of time scanning over these
pages. Worse still, the presence of lots of unevictable pages can confuse
kswapd into thinking that more aggressive pageout modes are required,
resulting in all kinds of bad behaviour.

Infrastructure to manage pages excluded from reclaim--i.e., hidden from
vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to
maintain "unevictable" pages on a separate per-zone LRU list, to "hide"
them from vmscan.

Kosaki Motohiro added the support for the memory controller unevictable
lru list.

Pages on the unevictable list have both PG_unevictable and PG_lru set.
Thus, PG_unevictable is analogous to and mutually exclusive with
PG_active--it specifies which LRU list the page is on.

The unevictable infrastructure is enabled by a new mm Kconfig option
[CONFIG_]UNEVICTABLE_LRU.

A new function 'page_evictable(page, vma)' in vmscan.c tests whether or
not a page may be evictable. Subsequent patches will add the various
!evictable tests. We'll want to keep these tests light-weight for use in
shrink_active_list() and, possibly, the fault path.

To avoid races between tasks putting pages [back] onto an LRU list and
tasks that might be moving the page from non-evictable to evictable state,
the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()'
-- tests the "evictability" of a page after placing it on the LRU, before
dropping the reference. If the page has become unevictable,
putback_lru_page() will redo the 'putback', thus moving the page to the
unevictable list. This way, we avoid "stranding" evictable pages on the
unevictable list.

[akpm@linux-foundation.org: fix fallout from out-of-order merge]
[riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build]
[nishimura@mxp.nes.nec.co.jp: remove redundant mapping check]
[kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework]
[kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c]
[kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure]
[kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch]
[kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: second chance replacement for anonymous pages

We avoid evicting and scanning anonymous pages for the most part, but
under some workloads we can end up with most of memory filled with
anonymous pages. At that point, we suddenly need to clear the referenced
bits on all of memory, which can take ages on very large memory systems.

We can reduce the maximum number of pages that need to be scanned by not
taking the referenced state into account when deactivating an anonymous
page. After all, every anonymous page starts out referenced, so why
check?

If an anonymous page gets referenced again before it reaches the end of
the inactive list, we move it back to the active list.

To keep the maximum amount of necessary work reasonable, we scale the
active to inactive ratio with the size of memory, using the formula
active:inactive ratio = sqrt(memory in GB * 10).

Kswapd CPU use now seems to scale by the amount of pageout bandwidth,
instead of by the amount of memory present in the system.

[kamezawa.hiroyu@jp.fujitsu.com: fix OOM with memcg]
[kamezawa.hiroyu@jp.fujitsu.com: memcg: lru scan fix]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: split LRU lists into anon & file sets

Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon"). The latter includes tmpfs.

The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.

This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists. The big
policy changes are in separate patches.

[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

define page_file_cache() function

Define page_file_cache() function to answer the question:
is page backed by a file?

Originally part of Rik van Riel's split-lru patch. Extracted to make
available for other, independent reclaim patches.

Moved inline function to linux/mm_inline.h where it will be needed by
subsequent "split LRU" and "noreclaim" patches.

Unfortunately this needs to use a page flag, since the PG_swapbacked state
needs to be preserved all the way to the point where the page is last
removed from the LRU. Trying to derive the status from other info in the
page resulted in wrong VM statistics in earlier split VM patchsets.

The total number of page flags in use on a 32 bit machine after this patch
is 19.

[akpm@linux-foundation.org: fix up out-of-order merge fallout]
[hugh@veritas.com: splitlru: shmem_getpage SetPageSwapBacked sooner[
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: Use an indexed array for LRU variables

Currently we are defining explicit variables for the inactive and active
list. An indexed array can be more generic and avoid repeating similar
code in several places in the reclaim code.

We are saving a few bytes in terms of code size:

Before:

text data bss dec hex filename
4097753 573120 4092484 8763357 85b7dd vmlinux

After:

text data bss dec hex filename
4097729 573120 4092484 8763333 85b7c5 vmlinux

Having an easy way to add new lru lists may ease future work on the
reclaim code.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Use ZVC for inactive and active counts

The determination of the dirty ratio to determine writeback behavior is
currently based on the number of total pages on the system.

However, not all pages in the system may be dirtied. Thus the ratio is always
too low and can never reach 100%. The ratio may be particularly skewed if
large hugepage allocations, slab allocations or device driver buffers make
large sections of memory not available anymore. In that case we may get into
a situation in which f.e. the background writeback ratio of 40% cannot be
reached anymore which leads to undesired writeback behavior.

This patchset fixes that issue by determining the ratio based on the actual
pages that may potentially be dirty. These are the pages on the active and
the inactive list plus free pages.

The problem with those counts has so far been that it is expensive to
calculate these because counts from multiple nodes and multiple zones will
have to be summed up. This patchset makes these counters ZVC counters. This
means that a current sum per zone, per node and for the whole system is always
available via global variables and not expensive anymore to calculate.

The patchset results in some other good side effects:

- Removal of the various functions that sum up free, active and inactive
page counts

- Cleanup of the functions that display information via the proc filesystem.

This patch:

The use of a ZVC for nr_inactive and nr_active allows a simplification of some
counter operations. More ZVC functionality is used for sums etc in the
following patches.

[akpm@osdl.org: UP build fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mm: less atomic ops

In the page release paths, we can be sure that nobody will mess with our
page->flags because the refcount has dropped to 0. So no need for atomic
operations here.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mm: migration page refcounting fix

Migration code currently does not take a reference to target page
properly, so between unlocking the pte and trying to take a new
reference to the page with isolate_lru_page, anything could happen to
it.

Fix this by holding the pte lock until we get a chance to elevate the
refcount.

Other small cleanups while we're here.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Swap Migration V5: LRU operations

This is the start of the `swap migration' patch series.

Swap migration allows the moving of the physical location of pages between
nodes in a numa system while the process is running. This means that the
virtual addresses that the process sees do not change. However, the system
rearranges the physical location of those pages.

The main intent of page migration patches here is to reduce the latency of
memory access by moving pages near to the processor where the process
accessing that memory is running.

The patchset allows a process to manually relocate the node on which its
pages are located through the MF_MOVE and MF_MOVE_ALL options while
setting a new memory policy.

The pages of process can also be relocated from another process using the
sys_migrate_pages() function call. Requires CAP_SYS_ADMIN. The migrate_pages
function call takes two sets of nodes and moves pages of a process that are
located on the from nodes to the destination nodes.

Manual migration is very useful if for example the scheduler has relocated a
process to a processor on a distant node. A batch scheduler or an
administrator can detect the situation and move the pages of the process
nearer to the new processor.

sys_migrate_pages() could be used on non-numa machines as well, to force all
of a particualr process's pages out to swap, if someone thinks that's useful.

Larger installations usually partition the system using cpusets into sections
of nodes. Paul has equipped cpusets with the ability to move pages when a
task is moved to another cpuset. This allows automatic control over locality
of a process. If a task is moved to a new cpuset then also all its pages are
moved with it so that the performance of the process does not sink
dramatically (as is the case today).

Swap migration works by simply evicting the page. The pages must be faulted
back in. The pages are then typically reallocated by the system near the node
where the process is executing.

For swap migration the destination of the move is controlled by the allocation
policy. Cpusets set the allocation policy before calling sys_migrate_pages()
in order to move the pages as intended.

No allocation policy changes are performed for sys_migrate_pages(). This
means that the pages may not faulted in to the specified nodes if no
allocation policy was set by other means. The pages will just end up near the
node where the fault occurred.

There's another patch series in the pipeline which implements "direct
migration".

The direct migration patchset extends the migration functionality to avoid
going through swap. The destination node of the relation is controllable
during the actual moving of pages. The crutch of using the allocation policy
to relocate is not necessary and the pages are moved directly to the target.
Its also faster since swap is not used.

And sys_migrate_pages() can then move pages directly to the specified node.
Implement functions to isolate pages from the LRU and put them back later.

This patch:

An earlier implementation was provided by Hirokazu Takahashi
<taka@valinux.co.jp> and IWAMOTO Toshihiro <iwamoto@valinux.co.jp> for the
memory hotplug project.

From: Magnus

This breaks out isolate_lru_page() and putpack_lru_page(). Needed for swap
migration.

Signed-off-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!