#
19871b5c |
|
07-Dec-2023 |
Christoph Hellwig <hch@lst.de> |
iomap: pass the length of the dirty region to ->map_blocks Let the file system know how much dirty data exists at the passed in offset. This allows file systems to allocate the right amount of space that actually is written back if they can't eagerly convert (e.g. because they don't support unwritten extents). Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
30deff85 |
|
07-Dec-2023 |
Christoph Hellwig <hch@lst.de> |
iomap: map multiple blocks at a time The ->map_blocks interface returns a valid range for writeback, but we still call back into it for every block, which is a bit inefficient. Change iomap_writepage_map to use the valid range in the map until the end of the folio or the dirty range inside the folio instead of calling back into every block. Note that the range is not used over folio boundaries as we need to be able to check the mapping sequence count under the folio lock. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231207072710.176093-14-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
ae5535ef |
|
07-Dec-2023 |
Christoph Hellwig <hch@lst.de> |
iomap: don't chain bios Back in the days when a single bio could only be filled to the hardware limits, and we scheduled a work item for each bio completion, chaining multiple bios for a single ioend made a lot of sense to reduce the number of completions. But these days bios can be filled until we reach the number of vectors or total size limit, which means we can always fit at least 1 megabyte worth of data in the worst case, but usually a lot more due to large folios. The only thing bio chaining is buying us now is to reduce the size of the allocation from an ioend with an embedded bio into a plain bio, which is a 52 bytes differences on 64-bit systems. This is not worth the added complexity, so remove the bio chaining and only use the bio embedded into the ioend. This will help to simplify further changes to the iomap writeback code. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231207072710.176093-10-hch@lst.de Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
432acd55 |
|
07-Dec-2023 |
Christoph Hellwig <hch@lst.de> |
iomap: move the io_folios field out of struct iomap_ioend The io_folios member in struct iomap_ioend counts the number of folios added to an ioend. It is only used at submission time and can thus be moved to iomap_writepage_ctx instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231207072710.176093-4-hch@lst.de Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
925c86a1 |
|
01-Aug-2023 |
Christoph Hellwig <hch@lst.de> |
fs: add CONFIG_BUFFER_HEAD Add a new config option that controls building the buffer_head code, and select it from all file systems and stacking drivers that need it. For the block device nodes and alternative iomap based buffered I/O path is provided when buffer_head support is not enabled, and iomap needs a a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call into the buffer_head code when it doesn't exist. Otherwise this is just Kconfig and ifdef changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4ce02c67 |
|
10-Jul-2023 |
Ritesh Harjani (IBM) <ritesh.list@gmail.com> |
iomap: Add per-block dirty state tracking to improve performance When filesystem blocksize is less than folio size (either with mapping_large_folio_support() or with blocksize < pagesize) and when the folio is uptodate in pagecache, then even a byte write can cause an entire folio to be written to disk during writeback. This happens because we currently don't have a mechanism to track per-block dirty state within struct iomap_folio_state. We currently only track uptodate state. This patch implements support for tracking per-block dirty state in iomap_folio_state->state bitmap. This should help improve the filesystem write performance and help reduce write amplification. Performance testing of below fio workload reveals ~16x performance improvement using nvme with XFS (4k blocksize) on Power (64K pagesize) FIO reported write bw scores improved from around ~28 MBps to ~452 MBps. 1. <test_randwrite.fio> [global] ioengine=psync rw=randwrite overwrite=1 pre_read=1 direct=0 bs=4k size=1G dir=./ numjobs=8 fdatasync=1 runtime=60 iodepth=64 group_reporting=1 [fio-run] 2. Also our internal performance team reported that this patch improves their database workload performance by around ~83% (with XFS on Power) Reported-by: Aravinda Herle <araherle@in.ibm.com> Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
d6bb59a9 |
|
19-May-2023 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: Create large folios in the buffered write path Use the size of the write as a hint for the size of the folio to create. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
d3bff1fc |
|
21-Apr-2023 |
Ritesh Harjani (IBM) <ritesh.list@gmail.com> |
iomap: Remove IOMAP_DIO_NOSYNC unused dio flag IOMAP_DIO_NOSYNC earlier was added for use in btrfs. But it seems for aio dsync writes this is not useful anyway. For aio dsync case, we we queue the request and return -EIOCBQUEUED. Now, since IOMAP_DIO_NOSYNC doesn't let iomap_dio_complete() to call generic_write_sync(), hence we may lose the sync write. Hence kill this flag as it is not in use by any FS now. Tested-by: Disha Goel <disgoel@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
471859f5 |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Rename page_ops to folio_ops The operations in struct page_ops all operate on folios, so rename struct page_ops to struct folio_ops. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> [djwong: port around not removing iomap_valid] Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
c82abc23 |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Rename page_prepare handler to get_folio The ->page_prepare() handler in struct iomap_page_ops is now somewhat misnamed, so rename it to ->get_folio(). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
9060bc4d |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap/gfs2: Get page in page_prepare handler Change the iomap ->page_prepare() handler to get and return a locked folio instead of doing that in iomap_write_begin(). This allows to recover from out-of-memory situations in ->page_prepare(), which eliminates the corresponding error handling code in iomap_write_begin(). The ->put_folio() handler now also isn't called with NULL as the folio value anymore. Filesystems are expected to use the iomap_get_folio() helper for getting locked folios in their ->page_prepare() handlers. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
98321b51 |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Add iomap_get_folio helper Add an iomap_get_folio() helper that gets a folio reference based on an iomap iterator and an offset into the address space. Use it in iomap_write_begin(). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
40405ddd |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Rename page_done handler to put_folio The ->page_done() handler in struct iomap_page_ops is now somewhat misnamed in that it mainly deals with unlocking and putting a folio, so rename it to ->put_folio(). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
80baab88 |
|
15-Jan-2023 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap/gfs2: Unlock and put folio in page_done handler When an iomap defines a ->page_done() handler in its page_ops, delegate unlocking the folio and putting the folio reference to that handler. This allows to fix a race between journaled data writes and folio writeback in gfs2: before this change, gfs2_iomap_page_done() was called after unlocking the folio, so writeback could start writing back the folio's buffers before they could be marked for writing to the journal. Also, try_to_free_buffers() could free the buffers before gfs2_iomap_page_done() was done adding the buffers to the current current transaction. With this change, gfs2_iomap_page_done() adds the buffers to the current transaction while the folio is still locked, so the problems described above can no longer occur. The only current user of ->page_done() is gfs2, so other filesystems are not affected. To catch out any out-of-tree users, switch from a page to a folio in ->page_done(). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
8e81aa16 |
|
20-Jan-2023 |
Christoph Hellwig <hch@lst.de> |
iomap: remove IOMAP_F_ZONE_APPEND No users left now that btrfs takes REQ_OP_WRITE bios from iomap and splits and converts them to REQ_OP_ZONE_APPEND internally. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
|
#
d7b64041 |
|
28-Nov-2022 |
Dave Chinner <dchinner@redhat.com> |
iomap: write iomap validity checks A recent multithreaded write data corruption has been uncovered in the iomap write code. The core of the problem is partial folio writes can be flushed to disk while a new racing write can map it and fill the rest of the page: writeback new write allocate blocks blocks are unwritten submit IO ..... map blocks iomap indicates UNWRITTEN range loop { lock folio copyin data ..... IO completes runs unwritten extent conv blocks are marked written <iomap now stale> get next folio } Now add memory pressure such that memory reclaim evicts the partially written folio that has already been written to disk. When the new write finally gets to the last partial page of the new write, it does not find it in cache, so it instantiates a new page, sees the iomap is unwritten, and zeros the part of the page that it does not have data from. This overwrites the data on disk that was originally written. The full description of the corruption mechanism can be found here: https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/ To solve this problem, we need to check whether the iomap is still valid after we lock each folio during the write. We have to do it after we lock the page so that we don't end up with state changes occurring while we wait for the folio to be locked. Hence we need a mechanism to be able to check that the cached iomap is still valid (similar to what we already do in buffered writeback), and we need a way for ->begin_write to back out and tell the high level iomap iterator that we need to remap the remaining write range. The iomap needs to grow some storage for the validity cookie that the filesystem provides to travel with the iomap. XFS, in particular, also needs to know some more information about what the iomap maps (attribute extents rather than file data extents) to for the validity cookie to cover all the types of iomaps we might need to validate. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
9c7babf9 |
|
22-Nov-2022 |
Dave Chinner <dchinner@redhat.com> |
xfs,iomap: move delalloc punching to iomap Because that's what Christoph wants for this error handling path only XFS uses. It requires a new iomap export for handling errors over delalloc ranges. This is basically the XFS code as is stands, but even though Christoph wants this as iomap funcitonality, we still have to call it from the filesystem specific ->iomap_end callback, and call into the iomap code with yet another filesystem specific callback to punch the delalloc extent within the defined ranges. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
478af190 |
|
22-Jul-2022 |
Christoph Hellwig <hch@lst.de> |
iomap: remove iomap_writepage Unused now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
2ec810d5 |
|
05-Jun-2022 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
mm/migrate: Add filemap_migrate_folio() There is nothing iomap-specific about iomap_migratepage(), and it fits a pattern used by several other filesystems, so move it to mm/migrate.c, convert it to be filemap_migrate_folio() and convert the iomap filesystems to use it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
36518b6b |
|
07-Jun-2022 |
Al Viro <viro@zeniv.linux.org.uk> |
teach iomap_dio_rw() to suppress dsync New flag, equivalent to removal of IOCB_DSYNC from iocb flags. This mimics what btrfs is doing (and that's what btrfs will switch to). However, I'm not at all sure that we want to suppress REQ_FUA for those - all btrfs hack really cares about is suppression of generic_write_sync(). For now let's keep the existing behaviour, but I really want to hear more detailed arguments pro or contra. [folded brain fix from willy] Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
786f847f |
|
05-May-2022 |
Christoph Hellwig <hch@lst.de> |
iomap: add per-iomap_iter private data Allow the file system to keep state for all iterations. For now only wire it up for direct I/O as there is an immediate need for it there. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
|
#
908c5490 |
|
05-May-2022 |
Christoph Hellwig <hch@lst.de> |
iomap: allow the file system to provide a bio_set for direct I/O Allow the file system to provide a specific bio_set for allocating direct I/O bios. This will allow file systems that use the ->submit_io hook to stash away additional information for file system use. To make use of this additional space for information in the completion path, the file system needs to override the ->bi_end_io callback and then call back into iomap, so export iomap_dio_bio_end_io for that. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
|
#
8597447d |
|
30-Apr-2022 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: Convert to release_folio Change all the filesystems which used iomap_releasepage to use the new function. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
#
7479c505 |
|
29-Apr-2022 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
fs: Convert iomap_readpage to iomap_read_folio A straightforward conversion as iomap_readpage already worked in folios. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
#
d82354f6 |
|
09-Feb-2022 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: Remove iomap_invalidatepage() Use iomap_invalidate_folio() in all the iomap-based filesystems and rename the iomap_invalidatepage tracepoint. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
|
#
2e7e80f7 |
|
09-Feb-2022 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
fs: Convert is_partially_uptodate to folios Since the uptodate property is maintained on a per-folio basis, the is_partially_uptodate method should also take a folio. Fix the types at the same time so it's clear that it returns true/false and takes the count in bytes, not blocks. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
|
#
ebb7fb15 |
|
26-Jan-2022 |
Dave Chinner <dchinner@redhat.com> |
xfs, iomap: limit individual ioend chain lengths in writeback Trond Myklebust reported soft lockups in XFS IO completion such as this: watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [kworker/12:1:3106] CPU: 12 PID: 3106 Comm: kworker/12:1 Not tainted 4.18.0-305.10.2.el8_4.x86_64 #1 Workqueue: xfs-conv/md127 xfs_end_io [xfs] RIP: 0010:_raw_spin_unlock_irqrestore+0x11/0x20 Call Trace: wake_up_page_bit+0x8a/0x110 iomap_finish_ioend+0xd7/0x1c0 iomap_finish_ioends+0x7f/0xb0 xfs_end_ioend+0x6b/0x100 [xfs] xfs_end_io+0xb9/0xe0 [xfs] process_one_work+0x1a7/0x360 worker_thread+0x1fa/0x390 kthread+0x116/0x130 ret_from_fork+0x35/0x40 Ioends are processed as an atomic completion unit when all the chained bios in the ioend have completed their IO. Logically contiguous ioends can also be merged and completed as a single, larger unit. Both of these things can be problematic as both the bio chains per ioend and the size of the merged ioends processed as a single completion are both unbound. If we have a large sequential dirty region in the page cache, write_cache_pages() will keep feeding us sequential pages and we will keep mapping them into ioends and bios until we get a dirty page at a non-sequential file offset. These large sequential runs can will result in bio and ioend chaining to optimise the io patterns. The pages iunder writeback are pinned within these chains until the submission chaining is broken, allowing the entire chain to be completed. This can result in huge chains being processed in IO completion context. We get deep bio chaining if we have large contiguous physical extents. We will keep adding pages to the current bio until it is full, then we'll chain a new bio to keep adding pages for writeback. Hence we can build bio chains that map millions of pages and tens of gigabytes of RAM if the page cache contains big enough contiguous dirty file regions. This long bio chain pins those pages until the final bio in the chain completes and the ioend can iterate all the chained bios and complete them. OTOH, if we have a physically fragmented file, we end up submitting one ioend per physical fragment that each have a small bio or bio chain attached to them. We do not chain these at IO submission time, but instead we chain them at completion time based on file offset via iomap_ioend_try_merge(). Hence we can end up with unbound ioend chains being built via completion merging. XFS can then do COW remapping or unwritten extent conversion on that merged chain, which involves walking an extent fragment at a time and running a transaction to modify the physical extent information. IOWs, we merge all the discontiguous ioends together into a contiguous file range, only to then process them individually as discontiguous extents. This extent manipulation is computationally expensive and can run in a tight loop, so merging logically contiguous but physically discontigous ioends gains us nothing except for hiding the fact the fact we broke the ioends up into individual physical extents at submission and then need to loop over those individual physical extents at completion. Hence we need to have mechanisms to limit ioend sizes and to break up completion processing of large merged ioend chains: 1. bio chains per ioend need to be bound in length. Pure overwrites go straight to iomap_finish_ioend() in softirq context with the exact bio chain attached to the ioend by submission. Hence the only way to prevent long holdoffs here is to bound ioend submission sizes because we can't reschedule in softirq context. 2. iomap_finish_ioends() has to handle unbound merged ioend chains correctly. This relies on any one call to iomap_finish_ioend() being bound in runtime so that cond_resched() can be issued regularly as the long ioend chain is processed. i.e. this relies on mechanism #1 to limit individual ioend sizes to work correctly. 3. filesystems have to loop over the merged ioends to process physical extent manipulations. This means they can loop internally, and so we break merging at physical extent boundaries so the filesystem can easily insert reschedule points between individual extent manipulations. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reported-and-tested-by: Trond Myklebust <trondmy@hammerspace.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
6e478521 |
|
30-Jul-2021 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap,xfs: Convert ->discard_page to ->discard_folio XFS has the only implementation of ->discard_page today, so convert it to use folios in the same patch as converting the API. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
8306a5f5 |
|
28-Apr-2021 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: Add iomap_invalidate_folio Keep iomap_invalidatepage around as a wrapper for use in address_space operations. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
952da063 |
|
29-Nov-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: add a IOMAP_DAX flag Add a flag so that the file system can easily detect DAX operations based just on the iomap operation requested instead of looking at inode state using IS_DAX. This will be needed to apply the to be added partition offset only for operations that actually use DAX, but not things like fiemap that are based on the block device. In the long run it should also allow turning the bdev, dax_dev and inline_data into a union. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
#
4fdccaa0 |
|
23-Jul-2021 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Add done_before argument to iomap_dio_rw Add a done_before argument to iomap_dio_rw that indicates how much of the request has already been transferred. When the request succeeds, we report that done_before additional bytes were tranferred. This is useful for finishing a request asynchronously when part of the request has already been completed synchronously. We'll use that to allow iomap_dio_rw to be used with page faults disabled: when a page fault occurs while submitting a request, we synchronously complete the part of the request that has already been submitted. The caller can then take care of the page fault and call iomap_dio_rw again for the rest of the request, passing in the number of bytes already tranferred. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
97308f8b |
|
22-Jul-2021 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Support partial direct I/O on user copy failures In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and return a partial result. This allows the caller to deal with the page fault and retry the remainder of the request. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
3e08773c |
|
12-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
block: switch polling to be bio based Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ef99b2d3 |
|
12-Oct-2021 |
Christoph Hellwig <hch@lst.de> |
block: replace the spin argument to blk_iopoll with a flags argument Switch the boolean spin argument to blk_poll to passing a set of flags instead. This will allow to control polling behavior in a more fine grained way. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-10-hch@lst.de [axboe: adapt to changed io_uring iopoll] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
fad0a1ab |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: constify iomap_iter_srcmap The srcmap returned from iomap_iter_srcmap is never modified, so mark the iomap returned from it const and constify a lot of code that never modifies the iomap. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
b74b1293 |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: rework unshare flag Instead of another internal flags namespace inside of buffered-io.c, just pass a UNSHARE hint in the main iomap flags field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
57320a01 |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: remove iomap_apply iomap_apply is unused now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> [djwong: rebase this patch to preserve git history of iomap loop control] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
a6d3d495 |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: switch __iomap_dio_rw to use iomap_iter Switch __iomap_dio_rw to use iomap_iter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
f4b896c2 |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: add the new iomap_iter model The iomap_iter struct provides a convenient way to package up and maintain all the arguments to the various mapping and operation functions. It is operated on using the iomap_iter() function that is called in loop until the whole range has been processed. Compared to the existing iomap_apply() function this avoid an indirect call for each iteration. For now iomap_iter() calls back into the existing ->iomap_begin and ->iomap_end methods, but in the future this could be further optimized to avoid indirect calls entirely. Based on an earlier patch from Matthew Wilcox <willy@infradead.org>. Signed-off-by: Christoph Hellwig <hch@lst.de> [djwong: add to apply.c to preserve git history of iomap loop control] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
e3c4ffb0 |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: mark the iomap argument to iomap_inline_data_valid const Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
4495c33e |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: mark the iomap argument to iomap_inline_data const Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
66b8165e |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: mark the iomap argument to iomap_sector const Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
1d25d0ae |
|
10-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: remove the iomap arguments to ->page_{prepare,done} These aren't actually used by the only instance implementing the methods. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
69f4a26c |
|
03-Aug-2021 |
Gao Xiang <hsiangkao@linux.alibaba.com> |
iomap: support reading inline data from non-zero pos The existing inline data support only works for cases where the entire file is stored as inline data. For larger files, EROFS stores the initial blocks separately and the remainder of the file ("file tail") adjacent to the inode. Generalise inline data to allow reading the inline file tail. Tails may not cross a page boundary in memory. We currently have no filesystems that support tails and writing, so that case is currently disabled (see iomap_write_begin_inline). Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
fd7353f8 |
|
28-Jun-2021 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: use __set_page_dirty_nobuffers The only difference between iomap_set_page_dirty() and __set_page_dirty_nobuffers() is that the latter includes a debugging check that a !Uptodate page has private data. Link: https://lkml.kernel.org/r/20210615162342.1669332-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
6e552494 |
|
04-May-2021 |
Brian Foster <bfoster@redhat.com> |
iomap: remove unused private field from ioend The only remaining user of ->io_private is the generic ioend merging infrastructure. The only user of that is XFS, which no longer sets ->io_private or passes an associated merge callback. Remove the unused parameter and the ->io_private field. CC: linux-fsdevel@vger.kernel.org Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
c3b0e880 |
|
04-Feb-2021 |
Naohiro Aota <naohiro.aota@wdc.com> |
iomap: support REQ_OP_ZONE_APPEND A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds such restricted bio using __bio_iov_append_get_pages if bio_op(bio) == REQ_OP_ZONE_APPEND. To utilize it, we need to set the bio_op before calling bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND and restricted bio. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
|
#
213f6271 |
|
23-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: add a IOMAP_DIO_OVERWRITE_ONLY flag Add a flag to signal that only pure overwrites are allowed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
2f632965 |
|
23-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
iomap: pass a flags argument to iomap_dio_rw Pass a set of flags to iomap_dio_rw instead of the boolean wait_for_completion argument. The IOMAP_DIO_FORCE_WAIT flag replaces the wait_for_completion, but only needs to be passed when the iocb isn't synchronous to start with to simplify the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> [djwong: rework xfs_file.c so that we can push iomap changes separately] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
763e4cdc |
|
29-Oct-2020 |
Brian Foster <bfoster@redhat.com> |
iomap: support partial page discard on writeback block mapping failure iomap writeback mapping failure only calls into ->discard_page() if the current page has not been added to the ioend. Accordingly, the XFS callback assumes a full page discard and invalidation. This is problematic for sub-page block size filesystems where some portion of a page might have been mapped successfully before a failure to map a delalloc block occurs. ->discard_page() is not called in that error scenario and the bio is explicitly failed by iomap via the error return from ->prepare_ioend(). As a result, the filesystem leaks delalloc blocks and corrupts the filesystem block counters. Since XFS is the only user of ->discard_page(), tweak the semantics to invoke the callback unconditionally on mapping errors and provide the file offset that failed to map. Update xfs_discard_page() to discard the corresponding portion of the file and pass the range along to iomap_invalidatepage(). The latter already properly handles both full and sub-page scenarios by not changing any iomap or page state on sub-page invalidations. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
c3d4ed1a |
|
28-Sep-2020 |
Christoph Hellwig <hch@lst.de> |
iomap: Allow filesystem to call iomap_dio_complete without i_rwsem This is to avoid the deadlock caused in btrfs because of O_DIRECT | O_DSYNC. Filesystems such as btrfs require i_rwsem while performing sync on a file. iomap_dio_rw() is called under i_rw_sem. This leads to a deadlock because of: iomap_dio_complete() generic_write_sync() btrfs_sync_file() Separate out iomap_dio_complete() from iomap_dio_rw(), so filesystems can call iomap_dio_complete() after unlocking i_rwsem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
27328818 |
|
23-May-2020 |
Christoph Hellwig <hch@lst.de> |
iomap: fix the iomap_fiemap prototype iomap_fiemap should take u64 start and len arguments, just like the ->fiemap prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-6-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
#
9d24a13a |
|
01-Jun-2020 |
Matthew Wilcox (Oracle) <willy@infradead.org> |
iomap: convert from readpages to readahead Use the new readahead operation in iomap. Convert XFS and ZoneFS to use it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-26-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8cecd0ba |
|
14-May-2019 |
Goldwyn Rodrigues <rgoldwyn@suse.com> |
iomap: add a filesystem hook for direct I/O bio submission This helps filesystems to perform tasks on the bio while submitting for I/O. This could be post-write operations such as data CRC or data replication for fs-handled RAID. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
|
#
c039b997 |
|
18-Oct-2019 |
Goldwyn Rodrigues <rgoldwyn@suse.com> |
iomap: use a srcmap for a read-modify-write I/O The srcmap is used to identify where the read is to be performed from. It is passed to ->iomap_begin, which can fill it in if we need to read data for partially written blocks from a different location than the write target. The srcmap is only supported for buffered writes so far. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> [hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as srcmap if not set, adjust length down to srcmap end as well] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
|
#
eb81cf9d |
|
18-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: renumber IOMAP_HOLE to 0 Instead of keeping a separate unnamed state for uninitialized iomaps, renumber IOMAP_HOLE to zero so that an uninitialized iomap is treated as a hole. Suggested-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
3590c4d8 |
|
18-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: ignore non-shared or non-data blocks in xfs_file_dirty xfs_file_dirty is used to unshare reflink blocks. Rename the function to xfs_file_unshare to better document that purpose, and skip iomaps that are not shared and don't need zeroing. This will allow to simplify the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
65a60e86 |
|
18-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: better document the IOMAP_F_* flags The documentation for IOMAP_F_* is a bit disorganized, and doesn't mention the fact that most flags are set by the file system and consumed by the iomap core, while IOMAP_F_SIZE_CHANGED is set by the core and consumed by the file system. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
ab08b01e |
|
17-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: move struct iomap_page out of iomap.h Now that all the writepage code is in the iomap code there is no need to keep this structure public. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
598ecfba |
|
17-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: lift the xfs writeback code to iomap Take the xfs writeback code and move it to fs/iomap. A new structure with three methods is added as the abstraction from the generic writeback code to the file system. These methods are used to map blocks, submit an ioend, and cancel a page that encountered an error before it was added to an ioend. Signed-off-by: Christoph Hellwig <hch@lst.de> [darrick: rename ->submit_ioend to ->prepare_ioend to clarify what it does] Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
7684e2c4 |
|
17-Oct-2019 |
Dave Chinner <dchinner@redhat.com> |
iomap: iomap that extends beyond EOF should be marked dirty When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Fixes: 3460cac1ca76 ("iomap: Use FUA for pure data O_DSYNC DIO writes") Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: removed the ext4 part; they'll handle it separately] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
13ef9544 |
|
15-Oct-2019 |
Jan Kara <jack@suse.cz> |
iomap: Allow forcing of waiting for running DIO in iomap_dio_rw() Filesystems do not support doing IO as asynchronous in some cases. For example in case of unaligned writes or in case file size needs to be extended (e.g. for ext4). Instead of forcing filesystem to wait for AIO in such cases, add argument to iomap_dio_rw() which makes the function wait for IO completion. This also results in executing iomap_dio_complete() inline in iomap_dio_rw() providing its return value to the caller as for ordinary sync IO. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
838c4f3d |
|
19-Sep-2019 |
Christoph Hellwig <hch@lst.de> |
iomap: move the iomap_dio_rw ->end_io callback into a structure Add a new iomap_dio_ops structure that for now just contains the end_io handler. This avoid storing the function pointer in a mutable structure, which is a possible exploit vector for kernel code execution, and prepares for adding a submit_io handler that btrfs needs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
6fe7b990 |
|
19-Sep-2019 |
Matthew Bobrowski <mbobrowski@mbobrowski.org> |
iomap: split size and error for iomap_dio_rw ->end_io Modify the calling convention for the iomap_dio_rw ->end_io() callback. Rather than passing either dio->error or dio->size as the 'size' argument, instead pass both the dio->error and the dio->size value separately. In the instance that an error occurred during a write, we currently cannot determine whether any blocks have been allocated beyond the current EOF and data has subsequently been written to these blocks within the ->end_io() callback. As a result, we cannot judge whether we should take the truncate failed write path. Having both dio->error and dio->size will allow us to perform such checks within this callback. Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> [hch: minor cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
#
5d907307 |
|
15-Jul-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
iomap: move internal declarations into fs/iomap/ Move internal function declarations out of fs/internal.h into include/linux/iomap.h so that our transition is complete. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
db074436 |
|
15-Jul-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
iomap: move the direct IO code into a separate file Move the direct IO code into a separate file so that we can group related functions in a single file instead of having a single enormous source file. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
8d3e72a1 |
|
27-Jun-2019 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: don't mark the inode dirty in iomap_write_end Marking the inode dirty for each page copied into the page cache can be very inefficient for file systems that use the VFS dirty inode tracking, and is completely pointless for those that don't use the VFS dirty inode tracking. So instead, only set an iomap flag when changing the in-core inode size, and open code the rest of __generic_write_end. Partially based on code from Christoph Hellwig. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
df0db3ec |
|
30-Apr-2019 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Add a page_prepare callback Move the page_done callback into a separate iomap_page_ops structure and add a page_prepare calback to be called before the next page is written to. In gfs2, we'll want to start a transaction in page_prepare and end it in page_done. Other filesystems that implement data journaling will require the same kind of mechanism. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
81214bab |
|
04-Dec-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: wire up the iopoll method Store the request queue the last bio was submitted to in the iocb private data in addition to the cookie so that we find the right block device. Also refactor the common direct I/O bio submission code into a nice little helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Modified to use bio_set_polled(). Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
5780a02f |
|
26-Oct-2018 |
Souptick Joarder <jrdr.linux@gmail.com> |
fs/iomap.c: change return type to vm_fault_t Change iomap_page_mkwrite() return type to vm_fault_t. see commit 1c8f422059ae ("mm: change return type to vm_fault_t") for reference. Link: http://lkml.kernel.org/r/20180827172050.GA18673@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9dc55f13 |
|
11-Jul-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: add support for sub-pagesize buffered I/O without buffer heads After already supporting a simple implementation of buffered writes for the blocksize == PAGE_SIZE case in the last commit this adds full support even for smaller block sizes. There are three bits of per-block information in the buffer_head structure that really matter for the iomap read and write path: - uptodate status (BH_uptodate) - marked as currently under read I/O (BH_Async_Read) - marked as currently under write I/O (BH_Async_Write) Instead of having new per-block structures this now adds a per-page structure called struct iomap_page to track this information in a slightly different form: - a bitmap for the per-block uptodate status. For worst case of a 64k page size system this bitmap needs to contain 128 bits. For the typical 4k page size case it only needs 8 bits, although we still need a full unsigned long due to the way the atomic bitmap API works. - two atomic_t counters are used to track the outstanding read and write counts There is quite a bit of boilerplate code as the buffered I/O path uses various helper methods, but the actual code is very straight forward. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
c03cea42 |
|
19-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: add initial support for writes without buffer heads For now just limited to blocksize == PAGE_SIZE, where we can simply read in the full page in write begin, and just set the whole page dirty after copying data into it. This code is enabled by default and XFS will now be feed pages without buffer heads in ->writepage and ->writepages. If a file system sets the IOMAP_F_BUFFER_HEAD flag on the iomap the old path will still be used, this both helps the transition in XFS and prepares for the gfs2 migration to the iomap infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
e184fde6 |
|
19-Jun-2018 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: add private pointer to struct iomap Add a private pointer to struct iomap to allow filesystems to pass data from iomap_begin to iomap_end. Will be used by gfs2 for passing on the on-disk inode buffer head. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
72b4daa2 |
|
19-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: add an iomap-based readpage and readpages implementation Simply use iomap_apply to iterate over the file and a submit a bio for each non-uptodate but mapped region and zero everything else. Note that as-is this can not be used for file systems with a blocksize smaller than the page size, but that support will be added later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
63899c6f |
|
19-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: add a page_done callback This will be used by gfs2 to attach data to transactions for the journaled data mode. But the concept is generic enough that we might be able to use it for other purposes like encryption/integrity post-processing in the future. Based on a patch from Andreas Gruenbacher. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
19e0c58f |
|
19-Jun-2018 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: generic inline data handling Add generic inline data handling by adding a pointer to the inline data region to struct iomap. When handling a buffered IOMAP_INLINE write, iomap_write_begin will copy the current inline data from the inline data region into the page cache, and iomap_write_end will copy the changes in the page cache back to the inline data region. This doesn't cover inline data reads and direct I/O yet because so far, we have no users. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [hch: small cleanups to better fit in with other iomap work] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
89eb1906 |
|
01-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: add an iomap-based bmap implementation This adds a simple iomap-based implementation of the legacy ->bmap interface. Note that we can't easily add checks for rt or reflink files, so these will have to remain in the callers. This interface just needs to die.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
7ee66c03 |
|
01-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: move IOMAP_F_BOUNDARY to gfs2 Just define a range of fs specific flags and use that in gfs2 instead of exposing this internal flag globally. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
9ecac0ef |
|
01-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: fix the comment describing IOMAP_NOWAIT Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
19319b53 |
|
01-Jun-2018 |
Christoph Hellwig <hch@lst.de> |
iomap: inline data should be an iomap type, not a flag Inline data is fundamentally different from our normal mapped case in that it doesn't even have a block address. So instead of having a flag for it it should be an entirely separate iomap range type. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
67482129 |
|
10-May-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
iomap: add a swapfile activation function Add a new iomap_swapfile_activate function so that filesystems can activate swap files without having to use the obsolete and slow bmap function. This enables XFS to support fallocate'd swap files and swap files on realtime devices. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz>
|
#
caa51d26 |
|
01-Nov-2017 |
Jan Kara <jack@suse.cz> |
dax, iomap: Add support for synchronous faults Add a flag to iomap interface informing the caller that inode needs fdstasync(2) for returned extent to become persistent and use it in DAX fault code so that we don't map such extents into page tables immediately. Instead we propagate the information that fdatasync(2) is necessary from dax_iomap_fault() with a new VM_FAULT_NEEDDSYNC flag. Filesystem fault handler is then responsible for calling fdatasync(2) and inserting pfn into page tables. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
3974320c |
|
16-Feb-2017 |
Bob Peterson <rpeterso@redhat.com> |
GFS2: Implement iomap for block_map This patch implements iomap for block mapping, and switches the block_map function to use it under the covers. The additional IOMAP_F_BOUNDARY iomap flag indicates when iomap has reached a "metadata boundary" and fetching the next mapping is likely to incur an additional I/O. This flag is used for setting the bh buffer boundary flag. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
#
9ca250a5 |
|
01-Oct-2017 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Add IOMAP_F_DATA_INLINE flag Add a new IOMAP_F_DATA_INLINE flag to indicate that a mapping is in a disk area that contains data as well as metadata. In iomap_fiemap, map this flag to FIEMAP_EXTENT_DATA_INLINE. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
|
#
19fe5f64 |
|
01-Oct-2017 |
Andreas Gruenbacher <agruenba@redhat.com> |
iomap: Switch from blkno to disk offset Replace iomap->blkno, the sector number, with iomap->addr, the disk offset in bytes. For invalid disk offsets, use the special value IOMAP_NULL_ADDR instead of IOMAP_NULL_BLOCK. This allows to use iomap for mappings which are not block aligned, such as inline data on ext4. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> # iomap, xfs Reviewed-by: Jan Kara <jack@suse.cz>
|
#
0ed3b0d4 |
|
29-Jun-2017 |
Andreas Gruenbacher <agruenba@redhat.com> |
vfs: Add iomap_seek_hole and iomap_seek_data helpers Filesystems can use this for implementing lseek SEEK_HOLE / SEEK_DATA support via iomap. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [hch: split functions, coding style cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
a38d1243 |
|
20-Jun-2017 |
Goldwyn Rodrigues <rgoldwyn@suse.com> |
fs: Introduce IOMAP_NOWAIT IOCB_NOWAIT translates to IOMAP_NOWAIT for iomaps. This is used by XFS in the XFS patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
fa5d932c |
|
27-Jan-2017 |
Dan Williams <dan.j.williams@intel.com> |
ext2, ext4, xfs: retrieve dax_device for iomap operations In preparation for converting fs/dax.c to use dax_direct_access() instead of bdev_direct_access(), add the plumbing to retrieve the dax_device associated with a given block_device. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
#
11bac800 |
|
24-Feb-2017 |
Dave Jiang <dave.jiang@intel.com> |
mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf ->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
8ff6daa1 |
|
28-Jan-2017 |
Christoph Hellwig <hch@lst.de> |
iomap: constify struct iomap_ops Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
ff6a9292 |
|
29-Nov-2016 |
Christoph Hellwig <hch@lst.de> |
iomap: implement direct I/O This adds a full fledget direct I/O implementation using the iomap interface. Full fledged in this case means all features are supported: AIO, vectored I/O, any iov_iter type including kernel pointers, bvecs and pipes, support for hole filling and async apending writes. It does not mean supporting all the warts of the old generic code. We expect i_rwsem to be held over the duration of the call, and we expect to maintain i_dio_count ourselves, and we pass on any kinds of mapping to the file system for now. The algorithm used is very simple: We use iomap_apply to iterate over the range of the I/O, and then we use the new bio_iov_iter_get_pages helper to lock down the user range for the size of the extent. bio_iov_iter_get_pages can currently lock down twice as many pages as the old direct I/O code did, which means that we will have a better batch factor for everything but overwrites of badly fragmented files. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Tested-by: Jens Axboe <axboe@fb.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
9484ab1b |
|
09-Nov-2016 |
Jan Kara <jack@suse.cz> |
dax: Introduce IOMAP_FAULT flag Introduce a flag telling iomap operations whether they are handling a fault or other IO. That may influence behavior wrt inode size and similar things. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
d33fd776 |
|
19-Oct-2016 |
Christoph Hellwig <hch@lst.de> |
iomap: add IOMAP_REPORT This allows the file system to tell a FIEMAP from a read operation, and thus avoids the need to report flags that aren't actually used in the read path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
ecd50729 |
|
18-Sep-2016 |
Christoph Hellwig <hch@lst.de> |
iomap: add IOMAP_F_NEW flag Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
e43c460d |
|
18-Sep-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
iomap: add a flag to report shared extents Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
5f4e5752 |
|
18-Sep-2016 |
Christoph Hellwig <hch@lst.de> |
fs: add iomap_file_dirty Originally-From: Christoph Hellwig <hch@lst.de> This function uses the iomap infrastructure to re-write all pages in a given range. This is useful for doing a copy-up of COW ranges, and might be useful for scrubbing in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
17de0a9f |
|
28-Aug-2016 |
Christoph Hellwig <hch@lst.de> |
iomap: don't set FIEMAP_EXTENT_MERGED for extent based filesystems Filesystems like XFS that use extents should not set the FIEMAP_EXTENT_MERGED flag in the fiemap extent structures. To allow for both behaviors for the upcoming gfs2 usage split the iomap type field into type and flags, and only set FIEMAP_EXTENT_MERGED if the IOMAP_F_MERGED flag is set. The flags field will also come in handy for future features such as shared extents on reflink-enabled file systems. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
8be9f564 |
|
20-Jun-2016 |
Christoph Hellwig <hch@lst.de> |
fs: iomap based fiemap implementation Add a simple fiemap implementation based on iomap_ops, partially based on a previous implementation from Bob Peterson <rpeterso@redhat.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
ae259a9c |
|
20-Jun-2016 |
Christoph Hellwig <hch@lst.de> |
fs: introduce iomap infrastructure Add infrastructure for multipage buffered writes. This is implemented using an main iterator that applies an actor function to a range that can be written. This infrastucture is used to implement a buffered write helper, one to zero file ranges and one to implement the ->page_mkwrite VM operations. All of them borrow a fair amount of code from fs/buffers. for now by using an internal version of __block_write_begin that gets passed an iomap and builds the corresponding buffer head. The file system is gets a set of paired ->iomap_begin and ->iomap_end calls which allow it to map/reserve a range and get a notification once the write code is finished with it. Based on earlier code from Dave Chinner. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
199a31c6 |
|
20-Jun-2016 |
Christoph Hellwig <hch@lst.de> |
fs: move struct iomap from exportfs.h to a separate header Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|