wifi: cfg80211: use ML element parsing helpers

Use the existing ML element parsing helpers and add a new
one for this (ieee80211_mle_get_mld_id).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.4da47b1f035b.I437a5570ac456449facb0b147851ef24a1e473c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()

Align the prototype of ieee80211_mle_get_bss_param_ch_cnt()
to also take a u8 * like the other functions, and make it
return -1 when the field isn't found, so that mac80211 can
check that instead of explicitly open-coding the check.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.583309181bc3.Ia61cb0b4fc034d5ac8fcfaf6f6fb2e115fadafe7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: adjust EHT capa when lowering bandwidth

If intending to associate with a lower bandwidth, remove capabilities
related to 320 MHz from the EHT capabilities element. Also change the
EHT MCS-NSS set accordingly: if just reducing 320->160 or similar the
format doesn't change, just cut off the last bytes. If changing from
higher bandwidth to 20 MHz only EHT STA, adjust the format.

Note that this also requires adjusting the caller in mlme.c since the
data written can now be shorter than it determined. We need to clean
all that up. Since the other callers pass NULL for the conn limit, we
don't need to change things there.

Link: https://msgid.link/20240129202041.b5f6df108c77.I0d8ea04079c61cb3744cc88625eeaf0d4776dc2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: implement MLO multicast deduplication

If the vif is an MLD then it may receive multicast from
different links, and should drop those frames according
to the SN. Implement that.

Link: https://msgid.link/20240129200456.693b77d14b44.I491846f2bea0058c14eab6422962c10bfae9b675@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: add/use ieee80211_get_sn()

This will also be useful for MLO duplicate multicast
detection, but add it already here and use it in one
place that trivially converts.

Link: https://msgid.link/20240129200456.f0ff49c80006.I850d2785ab1640e56e262d3ad7343b87f6962552@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: refactor puncturing bitmap extraction

Add a new inline helper function to ieee80211.h to
extract the disabled subchannels bitmap from an EHT
operation element, and use that in mac80211 where
we do that.

Link: https://msgid.link/20240129194108.d9f50dcec8d0.I8b08cbc2490a734fafcce0fa0fc328211ba6f10b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: validate MLO connections better

When going into an MLO connection, validate that the link IDs
match what userspace indicated, and that the AP MLD addresses
and capabilities are all matching between the links.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.ff83c034cb9a.I9962db0bfa8c73b37b8d5b59a3fad7f02f2129ae@changeid
[roll in extra fix from Miri to actually check the return value]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: add support for negotiated TTLM request

Update neg_ttlm and active_links according to the new mapping,
and send a negotiated TID-to-link map request with the new mapping.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.eeb385d771df.I2a5441c14421de884dbd93d1624ce7bb2c944833@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add definitions for negotiated TID to Link map

Add the relevant definitions and structures for TID to Link mapping
negotiation request/response/teardown according to P802.11be_D4.0.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.9ef2b866c8c7.Ieaf7dadea9961e0edc55d19c99f0f9fbae591de6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: handle UHB AP and STA power type

UHB AP send supported power type(LPI, SP, VLP)
in beacon and probe response IE and STA should
connect to these AP only if their regulatory support
the AP power type.

Beacon/Probe response are reported to userspace
with reason "STA regulatory not supporting to connect to AP
based on transmitted power type" and it should
not connect to AP.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: fix PV1 frame control field name

Update PV1 frame control field TODS to FROMDS to match 802.11 standard

Signed-off-by: Liam Kearney <liam.kearney@morsemicro.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20231025002755.1752983-1-liam.kearney@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: don't require protected vendor action frames

For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.

Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.

Fixes: 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: avoid offset calculation on NULL pointer

ieee80211_he_6ghz_oper() can be passed a NULL pointer
and checks for that, but already did the calculation
to inside of it before. Move it after the check.

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20231122030237.31276-1-michael-cy.lee@mediatek.com
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: remove unused argument of ieee80211_get_tdls_action()

Remove unused 'hdr_size' argument of 'ieee80211_get_tdls_action()'
and adjust 'ieee80211_report_used_skb()' accordingly.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231004153032.206134-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add UL-bandwidth definition of trigger frame

Define UL-bandwidth values of trigger frame according to 802.11 std.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230925080902.51449-2-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: support antenna control in injection

Support antenna control for injection by parsing the antenna
radiotap field (which may be presented multiple times) and
telling the driver about the resulting antenna bitmap. Of
course there's no guarantee the driver will actually honour
this, just like any other injection control.

If misconfigured, i.e. the injected HT/VHT MCS needs more
chains than antennas are configured, the bitmap is reset to
zero, indicating no selection.

For now this is only set up for two anntenas so we keep more
free bits, but that can be trivially extended if any driver
implements support for it that can deal with hardware with
more antennas.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.f71001aa4da9.I00ccb762a806ea62bc3d728fa3a0d29f4f285eeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: add support for parsing TID to Link mapping element

Add the relevant definitions for TID to Link mapping element
according to the P802.11be_D4.0.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.9ea9b0b4412a.I2281ab2c70e8b43a39032dc115db6a80f1f0b3f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: use bandwidth indication element for CSA

In CSA, parse the (EHT) bandwidth indication element and
use it (in fact prefer it if present).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.43ef01920556.If4f24a61cd634ab1e50eba43899b9e992bf25602@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Use flexible array in struct ieee80211_tim_ie

Currently struct ieee80211_tim_ie defines:
u8 virtual_map[1];

Per the guidance in [1] change this to be a flexible array.

Per the discussion in [2] wrap the virtual_map in a union with a u8
item in order to preserve the existing expectation that the
virtual_map must contain at least one octet (at least when used in a
non-S1G PPDU). This means that no driver changes are required.

[1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
[2] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/

Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230831-ieee80211_tim_ie-v3-2-e10ff584ab5d@quicinc.com
[add wifi prefix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: don't drop all unprotected public action frames

Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.

Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: Fix ieee80211.h kernel-doc issues

The kernel-doc script identified multiple issues in ieee80211.h, so
fix them. In the process update some references to the latest
applicable specification.

include/linux/ieee80211.h:848: warning: Function parameter or member 'count' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'period' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'duration' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:848: warning: Function parameter or member 'offset' not described in 'ieee80211_quiet_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'token' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'mode' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'type' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:860: warning: Function parameter or member 'request' not described in 'ieee80211_msrment_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'mode' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:871: warning: Function parameter or member 'count' not described in 'ieee80211_channel_sw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'mode' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_operating_class' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'new_ch_num' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:883: warning: Function parameter or member 'count' not described in 'ieee80211_ext_chansw_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_ttl' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_flags' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_reason' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:905: warning: Function parameter or member 'mesh_pre_value' not described in 'ieee80211_mesh_chansw_params_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_channel_width' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg0' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:913: warning: Function parameter or member 'new_center_freq_seg1' not described in 'ieee80211_wide_bw_chansw_ie'
include/linux/ieee80211.h:926: warning: expecting prototype for struct ieee80211_tim. Prototype was for struct ieee80211_tim_ie instead
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_psel' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_pmetric' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_congest' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_synch' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_auth' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_form' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:941: warning: Function parameter or member 'meshconf_cap' not described in 'ieee80211_meshconf_ie'
include/linux/ieee80211.h:964: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* mesh channel switch parameters element's flag indicator
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_flags' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_hopcount' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_ttl' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_addr' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_seq' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_interval' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:984: warning: Function parameter or member 'rann_metric' not described in 'ieee80211_rann_ie'
include/linux/ieee80211.h:1019: warning: expecting prototype for enum ieee80211_opmode_bits. Prototype was for enum ieee80211_vht_opmode_bits instead
include/linux/ieee80211.h:1052: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1052: warning: Function parameter or member 'link_margin' not described in 'ieee80211_tpc_report_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'compat_info' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'beacon_int' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1073: warning: Function parameter or member 'tsf_completion' not described in 'ieee80211_s1g_bcn_compat_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'ch_width' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_class' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'primary_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'oper_ch' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1086: warning: Function parameter or member 'basic_mcs_nss' not described in 'ieee80211_s1g_oper_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'aid' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'switch_count' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1097: warning: Function parameter or member 'response_int' not described in 'ieee80211_aid_response_ie'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_STATUS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MINOR_REASON' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CAPABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_INTENT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_LISTEN_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_BSSID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MANAGABILITY' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_CHANNEL_LIST' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_ABSENCE_NOTICE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_DEVICE_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_INFO' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_GROUP_ID' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INTERFACE' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_OPER_CHANNEL' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_INVITE_FLAGS' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_VENDOR_SPECIFIC' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1519: warning: Enum value 'IEEE80211_P2P_ATTR_MAX' not described in enum 'ieee80211_p2p_attr_id'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'frame_control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'duration' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ra' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'ta' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'control' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1554: warning: Function parameter or member 'start_seq_num' not described in 'ieee80211_bar'
include/linux/ieee80211.h:1579: warning: Function parameter or member 'reserved' not described in 'ieee80211_mcs_info'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'ampdu_params_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'mcs' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'extended_ht_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'tx_BF_cap_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1618: warning: Function parameter or member 'antenna_selection_info' not described in 'ieee80211_ht_cap'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'primary_chan' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'ht_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'operation_mode' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'stbc_param' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1704: warning: Function parameter or member 'basic_set' not described in 'ieee80211_ht_operation'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'mac_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1872: warning: Function parameter or member 'phy_cap_info' not described in 'ieee80211_he_cap_elem'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_oper_params' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'he_mcs_nss_set' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1936: warning: Function parameter or member 'optional' not described in 'ieee80211_he_operation'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'he_sr_control' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1948: warning: Function parameter or member 'optional' not described in 'ieee80211_he_spr'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'aifsn' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'ecw_min_max' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1960: warning: Function parameter or member 'mu_edca_timer' not described in 'ieee80211_he_mu_edca_param_ac_rec'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'mu_qos_info' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_be' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_bk' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vi' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:1974: warning: Function parameter or member 'ac_vo' not described in 'ieee80211_mu_edca_param_set'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_LPI_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_SP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Enum value 'IEEE80211_REG_VLP_AP' not described in enum 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_SP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_VLP' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2194: warning: Excess enum value 'IEEE80211_REG_LPI' description in 'ieee80211_ap_reg_power'
include/linux/ieee80211.h:2577: warning: cannot understand function prototype: 'struct ieee80211_he_6ghz_oper '
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power_info' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:2624: warning: Function parameter or member 'tx_power' not described in 'ieee80211_tx_pwr_env'
include/linux/ieee80211.h:4485: warning: expecting prototype for RSNX Capabilities(). Prototype was for WLAN_RSNX_CAPA_PROTECTED_TWT() instead
include/linux/ieee80211.h:4734: warning: expecting prototype for ieee80211_mle_get_eml_sync_delay(). Prototype was for ieee80211_mle_get_eml_med_sync_delay() instead
117 warnings as Errors

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230822-kerneldoc-v1-1-0d42ce5029bf@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: fix erroneous NSTR bitmap size checks

The complete profile bit together with the NSTR link pair
present bit indicate whether or not the NSTR bitmap is,
the NSTR bitmap size just indicates how big it is.

Fixes: 7b6f08771bf6 ("wifi: ieee80211: Support validating ML station profile length")
Fixes: 5c1f97537bfb ("wifi: mac80211: store BSS param change count from assoc response")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: Retrieve PSD information from RNR AP information

Retrieve the Power Spectral Density (PSD) value from RNR AP
information entry and store it so it could be used by the drivers.

PSD value is explained in Section 9.4.2.170 of Draft
P802.11Revme_D2.0.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: store BSS param change count from assoc response

When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: check EHT basic MCS/NSS set

Check that all the NSS in the EHT basic MCS/NSS set
are actually supported, otherwise disable EHT for the
connection.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.737827c906c9.I0c11a3cd46ab4dcb774c11a5bbc30aecfb6fce11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: update multi-link element STA reconfig

Update the MLE STA reconfig sub-type to 802.11be D3.0
format, which includes the operation update field.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.2e1383b31f07.I8055a111c8fcf22e833e60f5587a4d8d21caca5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: reorder presence checks in MLE per-STA profile

In ieee80211_mle_sta_prof_size_ok(), the presence
checks aren't ordered by field order, so that's a
bit confusing. Reorder them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.fdbf17320a37.I517cf27fdc3f6e5d6a2615182da47ba4bdf14039@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Support link removal using Reconfiguration ML element

Add support for handling link removal indicated by the
Reconfiguration Multi-Link element.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.d8a046dc0c1a.I4dcf794da2a2d9f4e5f63a4b32158075d27c0660@changeid
[use cfg80211_links_removed() API instead]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: use structs for TBTT information access

Make the data access a bit nicer overall by using structs. There is a
small change here to also accept a TBTT information length of eight
bytes as we do not require the 20 MHz PSD information.

This also fixes a bug reading the short SSID on big endian machines.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.4c3f8901c1bc.Ic3e94fd6e1bccff7948a252ad3bb87e322690a17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add structs for TBTT information access

The TBTT information can have various lengths with different elements
thare are present. Add definitions for the two types that we are
interested in (i.e. the ones that contain the BSSID).

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.2a6f8766a3ec.Ic962e28492212cc8ee1eb602b8f07a4ea172fc4a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add definitions for RNR MLD params

Add the definitions necessary to parse the MLD parameters
included in an RNR element.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.9999842237c0.I80f00a90cb4e43071432b4158f206c73ba799618@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: use default for medium synchronization delay

Default values are defined for the information included in the Medium
Synchronization Delay Information subfield. The spec says to
initialize the values to these defaults and only change them when
included.

Return the default value instead of zero so that the defaults are
used when the field is not included in the association response.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.a7725bef3795.I2d3528cf4af021c5b37f97fbe64ae9116ce9bef1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add helper to validate ML element type and size

The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: Fix the common size calculation for reconfiguration ML

The common information length is found in the first octet of the common
information.

Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Rename ieee80211_mle_sta_prof_size_ok()

Rename it to ieee80211_mle_basic_sta_prof_size_ok() as it
validates the size of the station profile included in
Basic Multi-Link element.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.9bdfd263974f.I7bebd26894f33716e93cc7da576ef3215e0ba727@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: ignore invalid TBTT info field types

The TBTT information field type must be zero. This is only changed in
the 802.11be draft specification where the value 1 is used to indicate
that only the MLD parameters are included.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: add support for Extra EHT LTF

Add support for Extra EHT LTF defined in 9.4.2.313
EHT Capabilities element.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.de019d7cc174.I806f0f6042b89274192701a60b4f7900822db666@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: provide a helper to fetch the medium synchronization delay

There are drivers which need this information.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.b1043f3126e2.Iad3806f8bf8df07f52ef0a02cc3d0373c44a8c93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: fetch and store the EML capability information

We need to teach the low level driver about the EML capability which
includes information for EMLSR / EMLMR operation.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-11-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: skip EHT BSS membership selector

Skip the EHT BSS membership selector for getting rates.
While at it, add the definitions for GLK and EPS, and
sort the list.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-9-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: correctly mark FTM frames non-bufferable

The checks of whether or not a frame is bufferable were not
taking into account that some action frames aren't, such as
FTM. Check this, which requires some changes to the function
ieee80211_is_bufferable_mmpdu() since we need the whole skb
for the checks now.

Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: clean up public action codes

WLAN_PUBLIC_ACTION_FTM_RESPONSE is duplicated with
WLAN_PUB_ACTION_FTM, but that might better be called
WLAN_PUB_ACTION_FTM_RESPONSE; clean up here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: brcmfmac: p2p: Introduce generic flexible array frame member

Silence run-time memcpy() false positive warning when processing
management frames:

memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26)

Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via
__builtin_dynamic_object_size) doesn't recognize that the union may end
with a flexible array, and returns "26" (the fixed size of the union),
rather than the remaining size of the allocation. Add an explicit
flexible array member and set it as the destination here, so that we
get the correct coverage for the memcpy().

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832

Reported-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Brian Henriquez <brian.henriquez@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org
[rename 'frame' to 'body']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: Do not open-code qos address offsets

When building with -Wstringop-overflow, GCC's KASAN implementation does
not correctly perform bounds checking within some complex structures
when faced with literal offsets, and can get very confused. For example,
this warning is seen due to literal offsets into sturct ieee80211_hdr
that may or may not be large enough:

drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c: In function 'iwl_mvm_rx_mpdu_mq':
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c:2022:29: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2022 | *qc &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
In file included from drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h:32,
from drivers/net/wireless/intel/iwlwifi/mvm/sta.h:15,
from drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:27,
from drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c:10:
drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/rx.h:559:16: note: at offset [78, 166] into destination object 'mpdu_len' of size 2
559 | __le16 mpdu_len;
| ^~~~~~~~

Refactor ieee80211_get_qos_ctl() to avoid using literal offsets,
requiring the creation of the actual structure that is described in the
comments. Explicitly choose the desired offset, making the code more
human-readable too. This is one of the last remaining warning to fix
before enabling -Wstringop-overflow globally.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97490
Link: https://github.com/KSPP/linux/issues/181
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221130212641.never.627-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: fix multi-link element subelement iteration

The subelements obviously start after the common data, including
the common multi-link element structure definition itself. This
bug was possibly just hidden by the higher bits of the control
being set to 0, so the iteration just found one bogus element
and most of the code could continue anyway.

Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Parse station profile from association response

When processing an association response frame for a Multi-Link
connection, extract the per station profile for each additional
link, and use it for parsing the link elements.

As the Multi-Link element might be fragmented, add support for
reassembling a fragmented element. To simplify memory management
logic, extend 'struct ieee802_11_elems' to hold a scratch buffer,
which is used for the defragmentation. Once an element is
reconstructed in the scratch area, point the corresponding element
pointer to it. Currently only defragmentation of Multi-Link element
and the contained per-STA profile subelement is supported.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211/mac80211: Fix ML element common size validation

The Multi-Link element can be fragmented, thus its size can exceed 254.
Thus, modify ieee80211_mle_size_ok() to use 'size_t len' instead of
'u8 len'.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211/mac80211: Fix ML element common size calculation

The common size is part of the length in the data
so don't add it again.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: Support validating ML station profile length

Add a function to validate EHT Multi-Link per station profile length.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211/mac80211: check EHT capability size correctly

For AP/non-AP the EHT MCS/NSS subfield size differs, the
4-octet subfield is only used for 20 MHz-only non-AP STA.
Pass an argument around everywhere to be able to parse it
properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: use struct_group to copy addresses

We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.

Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add helper functions for detecting TM/FTM frames

Add helper functions for detection timing measurement
and fine timing measurement frames.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Align with Draft P802.11be_D2.0

Align the mac80211 implementation with P802.11be_D2.0.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: Align with Draft P802.11be_D1.5

Align the mac80211 implementation with P802.11be_D1.5.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: s1g action frames are not robust

S1g action frame with code 22 is not protected so update the robust
action frame list.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220622010820.17522-1-chui-hao.chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: ieee80211: add definitions for multi-link element

Add the definitions necessary to build and parse some of the
multi-link element, the per-STA profile isn't fully included.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: do some rework towards MLO link APIs

In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.

So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.

For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.

Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add trigger frame definition

Define trigger stype of control frame, and its checking function, struct
and trigger type within common_info of trigger.

Signed-off-by: Po Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220608113224.11193-2-pkshih@realtek.com

iwlwifi: mvm: refactor setting PPE thresholds in STA_HE_CTXT_CMD

We are setting the PPE Thresholds in STA_HE_CTXT_CMD according
to HE PHY Capabilities IE. As EHT is introduced, we will have to
set this thresholds according to EHT PHY Capabilities IE if we're
in an EHT connection. Some parts of the code can be used for both
HE and EHT. Put this parts in functions which will be used in the
patch which adds support for EHT PPE.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.48a508dfffef.If392e44d88f96ebed7fadf827e327194d4bd97b1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

ieee80211: add EHT 1K aggregation definitions

We add the fields for parsing extended ADDBA request/respond,
and new max 1K aggregation for limit ADDBA request/respond.

Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF ->
IEEE80211_MAX_AMPDU_BUF_HE.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Add EHT (802.11be) definitions

Based on Draft P802.11be_D1.4.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20220214173004.928e23cacb2b.Id30a3ef2844b296efbd5486fe1da9ca36a95c5cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add helper to check HE capability element size

This element has a very dynamic structure, create a small helper
function to validate its size. We're currently checking it in
mac80211 in a conversion function, but that's actually slightly
buggy.

Link: https://lore.kernel.org/r/20220214172920.750bee9eaf37.Ie18359bd38143b7dc949078f10752413e6d36854@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: use tab to indent struct ieee80211_neighbor_ap_info

Somehow spaces were used here, use tab instead.

Link: https://lore.kernel.org/r/20220210201242.da8fa2e5ae8d.Ia452db01876e52e815f6337fef437049df0d8bd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix -Wcast-qual warnings

When enabling -Wcast-qual e.g. via W=3, we get a lot of
warnings from this file, whenever it's included. Since
the fixes are simple, just do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.79ec4a4bab29.I8177a0c79d656c552e22c88931d8da06f2977896@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: change HE nominal packet padding value defines

It's easier to use and understand, and to extend for EHT later,
if we use the values here instead of the shifted values.

Unfortunately, we need to add _POS so that we can use it in
places like iwlwifi/mvm where constants are needed.

While at it, fix the typo ("NOMIMAL") which also helps catch any
conflicts.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20211126104817.7c29a05b8eb5.I2ca9faf06e177e3035bec91e2ae53c2f91d41774@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Add new A-MPDU factor macro for HE 6 GHz peer caps

Add IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR as per IEEE Std 802.11ax-2021,
9.4.2.263 to use for peer max A-MPDU factor in 6 GHz band.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210913175510.193005-1-jouni@codeaurora.org

ieee80211: add power type definition for 6 GHz

6 GHz regulatory domains introduces different modes for 6 GHz AP
operations: Low Power Indoor (LPI), Standard Power (SP) and Very
Low Power (VLP). 6 GHz STAs could be operated as either Regular or
Subordinate clients. Define the flags for power type
of AP and STATION mode.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210924100052.32029-2-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

treewide: Replace 0-element memcpy() destinations with flexible arrays

The 0-element arrays that are used as memcpy() destinations are actually
flexible arrays. Adjust their structures accordingly so that memcpy()
can better reason able their destination size (i.e. they need to be seen
as "unknown" length rather than "zero").

In some cases, use of the DECLARE_FLEX_ARRAY() helper is needed when a
flexible array is alone in a struct.

Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: Marco Cesati <marcocesati@gmail.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>

ieee80211: add definition for transmit power envelope element

IEEE Std 802.11ax™-2021 makes changes to the transmit power envelope
element, adjust the code accordingly.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210820122041.12157-7-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add definition of regulatory info in 6 GHz operation information

IEEE Std 802.11ax™-2021 added regulatory info subfield in HE operation
element, add it to the header file.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210820122041.12157-3-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add TWT element definitions

Introduce TWT definitions and TWT Information element structure
in ieee80211.h

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/71d8b581fe4b5abc5b92f8d77ac2de3e2f7591b6.1629741512.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add defines for HE PHY cap byte 10

One bit out of the previously completely reserved byte 10 in
the PHY capabilities is used since 802.11ax D7.0, add a new
define for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c026feb3873d.I380f52a05ddb4153bc77ff7f276a3484819f69b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: define timing measurement in extended capabilities IE

Define the bit used for timing measurement support in extended
capabilities IE, used for time synchronization.

Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.b75f40765538.I92b50e43e29272c97d17ed5f37f216f4caf0f205@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add the value for Category '6' in "rtw_ieee80211_category"

Preparation work for removing the "enum rtw_ieee80211_category" in
"drivers/staging/rtl8188eu/include/ieee80211.h" and
"drivers/staging/rtl8723bs/include/ieee80211.h".

This enum is similar to "enum ieee80211_category" from
"include/linux/ieee80211.h". However it defines the value '6' as
RTW_WLAN_CATEGORY_FT.

So add a corresponding value in "ieee80211_category"

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/66be0187869bd7dae1c0b0785a32db695ee9872e.1624108556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: fix spelling of A-MSDU in HE capabilities

In the HE capabilities, spell A-MSDU correctly, not "A-MDSU".

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.9e6ff1af1181.If6868bc6902ccd9a95c74c78f716c4b41473ef14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: align HE capabilities A-MPDU Length Exponent Extension

The A-MPDU length exponent extension is defined differently in
802.11ax D6.1, align with that.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.c2a257d3e2df.I3455245d388c52c61dace7e7958dbed7e807cfb6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: align some HE capabilities with the spec

Some names were changed, align that with the spec as of
802.11ax-D6.1.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.b1e5fbab0d8c.I3eb6076cb0714ec6aec6b8f9dee613ce4a05d825@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add the values of ranging parameters max LTF total field

Add an enum with the values of the ranging parameters max LTF total
field, as defined in IEEE802.11az_D2.6, table Table 9-322h23fc.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.d2588ebb1974.I9424c8ade13c4c938cb9999d8ce99d0d4c1cc198@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: update reduced neighbor report TBTT info length

A new field (20MHz PSD - 1 byte) was added to the RNR TBTT info field.
Adjust the expected TBTT info length accordingly.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.b503adccce6a.Ie684e1d3039c111bf2d521bf762aaec3f7a24d2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Parse SAE H2E only membership selector

This extends the support for drivers that rebuild IEs in the
FW (same as with HT/VHT/HE).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.4012647275f3.I1a93ae71c57ef0b6f58f99d47fce919d19d65ff0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Add definition for WFA DPP

Add Wi-Fi Alliance definition for DPP (Device Provisioning Protocol).

Signed-off-by: Kurt Lee <kurt.lee@cypress.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Link: https://lore.kernel.org/r/20201012084347.121557-2-wright.feng@cypress.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: extend support to config spatial reuse parameter set

Allow the user to configure below Spatial Reuse Parameter Set element.
* Non-SRG OBSS PD Max Offset
* SRG BSS Color Bitmap
* SRG Partial BSSID Bitmap

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1601278091-20313-2-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support S1G association

The changes required for associating in S1G are:

- apply S1G BSS channel info before assoc
- mark all S1G STAs as QoS STAs
- include and parse AID request element
- handle new Association Response format
- don't fail assoc if supported rates element is missing

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com
[pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: encode listen interval for S1G

S1G allows listen interval up to 2^14 * 10000 beacon
intervals. In order to do this listen interval needs a
scaling factor applied to the lower 14 bits. Calculate
this and properly encode the listen interval for S1G STAs.

See IEEE802.11ah-2016 Table 9-44a for reference.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com
[move listen_int_usf into function using it]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: handle Association Response from S1G STA

The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: convert S1G beacon to scan results

The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: support S1G capability overrides in assoc

NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: redefine S1G bits with GENMASK

The S1G capability fields were defined by ORing BITS()
together, and expecting a custom macro to use the _SHIFT
definitions. Use the Linux kernel GENMASK for the
definitions now, and FIELD_{GET,PREP} to access the fields
in the future.

Take the chance to rename eg. S1G_CAPAB_B0 to the more
compact S1G_CAP0.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-2-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Handle special status codes in SAE commit

SAE authentication has been extended with H2E (IEEE 802.11 REVmd) and PK
(WFA) options. Those extensions use special status code values in the
SAE commit messages (Authentication frame with transaction sequence
number 1) to identify which extension is in use. mac80211 was
interpreting those new values as the AP denying authentication and that
resulted in failure to complete SAE authentication in some cases.

Fix this by adding exceptions for the new status code values 126 and
127.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200731183830.18735-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Add missing and new AKM suite selector definitions

Add the definitions for missing AKM selectors defined in
IEEE P802.11-REVmd/D3.0, table 9-151. These definitions will
be used by various drivers that support these new AKM suites.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
Link: https://lore.kernel.org/r/20200617113132.13477-1-vjakkam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: check the correct bit for EMA AP

An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set
bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec).
So the *3rd* bit of the 10th byte should be checked.
Also, in one place, the wrong byte was checked.
(cfg80211_find_ie returns a pointer to the beginning of the IE,
so the data really starts at ie[2], so the 10th byte
should be ie[12]. To avoid this confusion, use cfg80211_find_elem
instead).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add HE ext EIDs and 6 GHz capability defines

Add the HE extended element IDs and the definitions for the
HE 6 GHz band capabilities element, from Draft 5.0.

Link: https://lore.kernel.org/r/20200528213443.1a6689fe093f.Ifdc5400fb01779351354daf38663ebeea03c9ad9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add code to obtain and parse 6 GHz operation field

Add some code to obtain and parse the 6 GHz operation field
inside the HE operation element.

While at it, fix the required length using sizeof() the new
struct, which is 5 instead of 4 now.

Link: https://lore.kernel.org/r/20200528213443.42ca72c45ca9.Id74bc1b03da9ea6574f9bc70deeb60dfc1634359@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: definitions for reduced neighbor reports

Add the necessary definitions to parse reduced neighbor
report elements.

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
[change struct name, remove IEEE80211_MIN_AP_NEIGHBOR_INFO_SIZE]
Link: https://lore.kernel.org/r/20200528213443.4f9154461c06.I518d9898ad982f838112ea9ca14a20d6bbb16394@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Replace zero-length array with flexible-array

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Add new AMPDU factor macro for HE peer caps

Add IEEE80211_HE_VHT_MAX_AMPDU_FACTOR and IEEE80211_HE_HT_MAX_AMPDU_FACTOR
as per spec to use for peer max ampdu factor.

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1588611900-21185-1-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: S1G defines

These are found in IEEE-802.11ah-2016.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-5-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: add KHz variants of frame RX API

Drivers may wish to report the RX frequency in units of
KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with
cfg80211_rx_mgmt() so exisiting drivers which can't report
KHz anyway don't need to change. Add a similar wrapper for
cfg80211_report_obss_beacon() so the frequency units stay
somewhat consistent.

This doesn't actually change the nl80211 API yet.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com
[fix mac80211 calling the non-khz version of obss beacon report,
drop trace point name changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Fix incorrect mask for default PE duration

Fixes bitmask for HE opration's default PE duration.

Fixes: daa5b83513a7 ("mac80211: update HE operation fields to D3.0")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Link: https://lore.kernel.org/r/20200506102430.5153-1-pradeepc@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: share 802.11 unit conversion helpers

MHZ_TO_KHZ, and KHZ_TO_MHZ are useful to drivers and
elsewhere so export these in the common ieee80211 header.
Move the power helpers also because we might as well.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200402011810.22947-2-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Parse HE membership selector

This extends the support for drivers that rebuilds IEs in the
FW (same as with HT/VHT).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.20feaabfb484.I886252639604c8e3e84b8ef97962f1b0e4beec81@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: implement Operating Mode Notification extended NSS support

Somehow we missed this for a long time, but similar to the extended
NSS support in VHT capabilities, we need to have this in Operating
Mode notification.

Implement it by
* parsing the 160/80+80 bit there and setting the bandwidth
appropriately
* having callers of ieee80211_get_vht_max_nss() pass in the current
max NSS value as received in the operating mode notification in
order to modify it appropriately depending on the extended NSS
bits.

This updates all drivers that use it, i.e. only iwlwifi/mvm.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.098483728cfa.I4e8c25d3288441759c2793247197229f0696a37d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix HE SPR size calculation

The he_sr_control field is just a u8, so le32_to_cpu()
shouldn't be applied to it; this was evidently copied
from ieee80211_he_oper_size(). Fix it, and also adjust
the type of the local variable.

Fixes: ef11a931bd1c ("mac80211: HE: add Spatial Reuse element parsing support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200325090918.dfe483b49e06.Ia53622f23b2610a2ae6ea39a199866196fe946c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add WPA3 OWE AKM suite selector

Add the definition for Opportunistic Wireless Encryption AKM selector.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-3-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: parse also the RSNXE IE

Parse also the RSN Extension IE when parsing the rest of the IEs.
It will be used in a later patch.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-21-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix 'the' doubling in comments

Remove redundant 'the' where 'the the' was written.

Signed-off-by: Zvika Yehudai <zvikayeh@gmail.com>
Link: https://lore.kernel.org/r/20200203080823.24949-1-zvikayeh@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add ieee80211_is_any_nullfunc()

commit 08a5bdde3812 ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED")
Fixed a bug where we failed to take into account a
nullfunc frame can be either non-QoS or QoS. It turns out
there is at least one more bug in
ieee80211_sta_tx_notify(), introduced in
commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing"),
where we forgot to check for the QoS variant and so
assumed the QoS nullfunc frame never went out

Fix this by adding a helper ieee80211_is_any_nullfunc()
which consolidates the check for non-QoS and QoS nullfunc
frames. Replace existing compound conditionals and add a
couple more missing checks for QoS variant.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200114055940.18502-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

trivial: mac80211: fix indentation

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20191206143103.3645-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add support for the ADDBA extension element

HE allows peers to negotiate the aggregation fragmentation level to be used
during transmission. The level can be 1-3. The Ext element is added behind
the ADDBA request inside the action frame. The responder will then reply
with the same level or a lower one if the requested one is not supported.
This patch only handles the negotiation part as the ADDBA frames get passed
to the ATH11k firmware, which does the rest of the magic for us aswell as
generating the requests.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190729104512.27615-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix ieee80211_he_oper_size() comment

Johannes mentioned that the comment should not reference mac80211 as other
subsystems might call the helper.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20190729102342.8659-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: HE: add Spatial Reuse element parsing support

Add support to mac80211 for parsing SPR elements as per
P802.11ax_D4.0 section 9.4.2.241.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190618061915.7102-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add support for parsing ADDBA_EXT IEs

ADDBA_EXT IEs can be used to negotiate the BA fragmentation level.

Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190713163642.18491-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ieee80211: Add a missing extended capability flag definition

Add the "OBSS Narrow Bandwidth RU In OFDMA Tolerance Support" flag
definition to the definitions of the flags covered by the Extended
Capability IE.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: add support for SAE authentication offload

Let drivers advertise support for station-mode SAE authentication
offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: update HE IEs to D4.0 spec

Update the out-dated comments as well, and have them point to
the correct sections in the D4.0 spec.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: support non-inheritance element

Subelement profile may specify element IDs it doesn't inherit
from the management frame. Support it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: update HE IEs to D3.3

Update element names and new fields according to D3.3 of
the HE spec.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support max channel switch time element

2018 REVmd of the spec introduces the max channel switch time
element which is optionally included in beacons/probes when there
is a channel switch / extended channel switch element.
The value represents the maximum delay between the time the AP
transmitted the last beacon in current channel and the expected
time of the first beacon in the new channel, in TU.

Parse the value and pass it to the driver.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

iwlwifi: mvm: support FTM initiator

Add support for FTM initiator, i.e. peer measurements with FTM
if the firmware supports FTM.

Additionally, add two defines we depend on in
include/linux/ieee80211.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

cfg80211: Use const more consistently in for_each_element macros

Enforce the first argument to be a correct type of a pointer to struct
element and avoid unnecessary typecasts from const to non-const pointers
(the change in validate_ie_attr() is needed to make this part work). In
addition, avoid signed/unsigned comparison within for_each_element() and
mark struct element packed just in case.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix for_each_element_extid()

The data/datalen argument names cannot be used as those
are also the struct element names, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: indicate support for multiple BSSID

Set multi-bssid support flags according to driver support.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support multi-bssid

Add support for multi-bssid.

This includes:
- Parsing multi-bssid element
- Overriding DTIM values
- Taking into account in various places the inner BSSID instead of
transmitter BSSID
- Save aside some multi-bssid properties needed by drivers

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: add and use strongly typed element iteration macros

Rather than always iterating elements from frames with pure
u8 pointers, add a type "struct element" that encapsulates
the id/datalen/data format of them.

Then, add the element iteration macros
* for_each_element
* for_each_element_id
* for_each_element_extid

which take, as their first 'argument', such a structure and
iterate through a given u8 array interpreting it as elements.

While at it and since we'll need it, also add
* for_each_subelement
* for_each_subelement_id
* for_each_subelement_extid

which instead of taking data/length just take an outer element
and use its data/datalen.

Also add for_each_element_completed() to determine if any of
the loops above completed, i.e. it was able to parse all of
the elements successfully and no data remained.

Use for_each_element_id() in cfg80211_find_ie_match() as the
first user of this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: update HE operation fields to D3.0

HE Operation element has changed in 11ax D3.0. Update the fields
accordingly.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add bits for TWT in Extended Capabilities IE

These bits are defined in ieee802.11ax to advertise support
for TWT in addition to the bits in the HE IE.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

{nl,mac}80211: report gate connectivity in station info

Capture the current state of gate connectivity from the mesh
formation field in mesh config whenever we receive a beacon,
and report that via GET_STATION. This allows applications
doing mesh peering in userspace to make peering decisions
based on peers' current upstream connectivity.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: minstrel: Enable STBC and LDPC for VHT Rates

If peer support reception of STBC and LDPC, enable them for better
performance.

Signed-off-by: Chaitanya TK <chaitanya.mgit@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: align to draft 11ax D3.0

Align to new 11ax draft D3.0. Change/add new MAC and PHY capabilities
and update drivers' 11ax capabilities and mac80211's debugfs
accordingly.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add new VHT capability fields/parsing

IEEE 802.11-2016 extended the VHT capability fields to allow
indicating the number of spatial streams depending on the
actually used bandwidth, add support for decoding this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: remove redundant leading zeroes

The defines of IEEE80211_HE_OPERATION_VHT_OPER_INFO and
IEEE80211_HE_OPERATION_MULTI_BSSID_AP have leading zeroes
that makes the number look like it is bigger than 32 bit.
This is misleading, remove it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: bump IEEE80211_MAX_AMPDU_BUF to support HE

Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support
and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere.

This is derived from my internal patch, parts of which Luca
had sent upstream.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Add support for HE

Add support for the HE in cfg80211 and also add userspace API to
nl80211 to send rate information out, conforming with P802.11ax_D2.0.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

mac80211: add get TID helper

Extracting the TID from the QOS header is common enough
to justify helper.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Increase PMK maximum length to 64 bytes

Increase the PMK maximum length to 64 bytes to accommodate
the key length used in DPP with the NIST P-521 and
Brainpool 512 curves.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Add WFA TPC report element OUI type

Add Transmit Power Control OUI type definition for WLAN_OUI_MICROSOFT.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: update public action codes

Update Public Action field values as updated in IEEE Std 802.11-2016,
so that modules/drivers can refer it.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

cfg80211: support 4-way handshake offloading for 802.1X

Add API for setting the PMK to the driver. For FT support, allow
setting also the PMK-R0 Name.

This can be used by drivers that support 4-Way handshake offload
while IEEE802.1X authentication is managed by upper layers.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to
say that the device may require it]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: support 4-way handshake offloading for WPA/WPA2-PSK

Let drivers advertise support for station-mode 4-way handshake
offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag.

Extend use of NL80211_ATTR_PMK attribute indicating it might be passed
as part of NL80211_CMD_CONNECT command, and contain the PSK (which is
the PMK, hence the name.)

The driver/device is assumed to handle the 4-way handshake by
itself in this case (including key derivations, etc.), instead
of relying on the supplicant.

This patch is somewhat based on this one (by Vladimir Kondratiev):
https://patchwork.kernel.org/patch/1309561/.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[arend.vanspriel@broadcom.com rebase dealing with existing ATTR_PMK]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK docs to indicate
that this offload might be required]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Add support for BSS max idle period element

Parse the BSS max idle period element and set the BSS configuration
accordingly so the driver can use this information to configure the
max idle period and to use protected management frames for keep alive
when required.

The BSS max idle period element is defined in IEEE802.11-2016,
section 9.4.2.79

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix kernel-doc parsing errors

Some of the enum definitions are unnamed but there's still
an attempt at documenting them - that doesn't work. Name
them to make that work.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add FT-802.1X AKM suite selector

Add the definition for FT-8021.1X AKM selector as defined in
IEEE Std 802.11-2016, table 9-133.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add SUITE_B AKM selectors

Add the definitions for SUITE_B and SUITE_B_192 AKM selectors as
defined in IEEE802.11REVmc_D5.0, table 9-132.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Add support for FILS shared key authentication offload

Enhance nl80211 and cfg80211 connect request and response APIs to
support FILS shared key authentication offload. The new nl80211
attributes can be used to provide additional information to the driver
to establish a FILS connection. Also enhance the set/del PMKSA to allow
support for adding and deleting PMKSA based on FILS cache identifier.

Add a new feature flag that drivers can use to advertize support for
FILS shared key authentication and association in station mode when
using their own SME.

Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: define HT operation CCFS2 field

The Channel Center Frequency Segment 2 field is used in
802.11-2016 for encoding the actual channel position of
the 80+80/160 MHz channel, if the max NSS is restricted.
This is used for backwards compatibility.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: rename CCFS1/CCFS2 to CCFS0/CCFS1

This matches the spec, and otherwise things are really
confusing with the next patch adding CCFS2.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add FT-PSK AKM suite selector

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: add HT/VHT capabilities to AP parameters

For the benefit of drivers that rebuild IEs in firmware, parse the
IEs for HT/VHT capabilities and the respective membership selector
in the (extended) supported rates. This avoids duplicating the same
code into all drivers that need this information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: define cipher/AKM suites using a macro

The spec writes cipher/AKM suites as something like 00-0F-AC:9,
but the part after the colon isn't hex, it's decimal, so that
we've already had a few mistakes (in other code, or unmerged
patches) to e.g. write 0x000FAC10 instead of 0x000FAC0A.

Use a macro to avoid that problem.

Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: move IEEE80211_NUM_ACS to ieee80211.h

This constant isn't really specific to mac80211, so move it
"up" a level to ieee80211.h

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Add KEK/nonces for FILS association frames

The new nl80211 attributes can be used to provide KEK and nonces to
allow the driver to encrypt and decrypt FILS (Re)Association
Request/Response frames in station mode.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Add Fast Initial Link Setup (FILS) auth algs

This defines authentication algorithms for FILS (IEEE 802.11ai).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Define IEEE P802.11ai (FILS) information elements

Define the Element IDs and Element ID Extensions from IEEE
P802.11ai/D11.0. In addition, add a new cfg80211_find_ext_ie() wrapper
to make it easier to find information elements that used the Element ID
Extension field.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Encrypt "Group addressed privacy" action frames

Previously, the action frames to group address was not encrypted. But
[1] "Table 8-38 Category values" indicates "Mesh" and "Multihop" category
action frames should be encrypted (Group addressed privacy == yes). And the
encyption key should be MGTK ([1] 10.13 Group addressed robust management frame
procedures). So this patch modifies the code to make it suitable for spec.

[1] IEEE Std 802.11-2012

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

wireless: Use macro instead of number

Use IEEE80211_MIN_ACTION_SIZE macro for robust management frame check.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

mac80211: add A-MSDU tx support

Requires software tx queueing and fast-xmit support. For good
performance, drivers need frag_list support as well. This avoids the
need for copying data of aggregated frames. Running without it is only
supported for debugging purposes.

To avoid performance and packet size issues, the rate control module or
driver needs to limit the maximum A-MSDU size by setting
max_rc_amsdu_len in struct ieee80211_sta.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[fix locking issue]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add fast-rx path

The regular RX path has a lot of code, but with a few
assumptions on the hardware it's possible to reduce the
amount of code significantly. Currently the assumptions
on the driver are the following:
* hardware/driver reordering buffer (if supporting aggregation)
* hardware/driver decryption & PN checking (if using encryption)
* hardware/driver did de-duplication
* hardware/driver did A-MSDU deaggregation
* AP_LINK_PS is used (in AP mode)
* no client powersave handling in mac80211 (in client mode)

of which some are actually checked per packet:
* de-duplication
* PN checking
* decryption
and additionally packets must
* not be A-MSDU (have been deaggregated by driver/device)
* be data packets
* not be fragmented
* be unicast
* have RFC 1042 header

Additionally dynamically we assume:
* no encryption or CCMP/GCMP, TKIP/WEP/other not allowed
* station must be authorized
* 4-addr format not enabled

Some data needed for the RX path is cached in a new per-station
"fast_rx" structure, so that we only need to look at this and
the packet, no other memory when processing packets on the fast
RX path.

After doing the above per-packet checks, the data path collapses
down to a pretty simple conversion function taking advantage of
the data cached in the small fast_rx struct.

This should speed up the RX processing, and will make it easier
to reason about parallelizing RX (for which statistics will need
to be per-CPU still.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: support parsing Fine Timing Measurement action frame

Add definition for Fine Timing Measurement (FTM) frame format
as defined in IEEE802.11-REVmcD5.0 section 9.6.8.33

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: limit the A-MSDU Tx based on peer's capabilities

In VHT, the specification allows to limit the number of
MSDUs in an A-MSDU in the Extended Capabilities IE. There
is also a limitation on the byte size in the VHT IE.
In HT, the only limitation is on the byte size.
Parse the capabilities from the peer and make them
available to the driver.

In HT, there is another limitation when a BA agreement
is active: the byte size can't be greater than 4095.
This is not enforced here.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: process and save VHT MU-MIMO group frame

The Group ID Management frame is an Action frame of
category VHT. It is transmitted by the AP to assign
or change the user position of a STA for one or more
group IDs.
Process and save the group membership data. Notify
underlying driver of changes.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: add WNM action frame categories

Add the WNM and unprotected WNM categories and mark the latter
as not robust.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: update robust action frame list

Unprotected DMG and VHT action frames are not protected, reflect
that in the list.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net/ieee80211: ieee80211_is_* can be boolean

This patch makes ieee80211_is_* return bool to improve
readability due to these particular functions only using either
one or zero as their return value.

No functional change.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireless: mark element IDs 8 and 9 reserved

These were never used in the tree, and are marked as reserved
in the IEEE 802.11 documentation (ANA).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: allow to transmit A-MSDU within A-MPDU

Advertise the capability to send A-MSDU within A-MPDU
in the AddBA request sent by mac80211. Let the driver
know about the peer's capabilities.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix BIT position for TDLS WIDE extended cap

The bit was not according to ieee80211 specification.
Fix that.

Reviewed-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80111: Add BIP-CMAC-256 cipher

This allows mac80211 to configure BIP-CMAC-256 to the driver and also
use software-implementation within mac80211 when the driver does not
support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphers

This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128,
BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites
were defined in IEEE Std 802.11ac-2013.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add parsing of TDLS specific IEs

These are used in TDLS channel switching code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg/mac80211: define TDLS channel switch feature bit

Define some related TDLS protocol constants and advertise channel switch
support in the extended-capabilities IE when the feature bit is defined.

Actually supporting TDLS channel-switching also requires support for
some new nl80211 commands, to be introduced by future patches.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add BSS coex IE to TDLS setup frames

Add the BSS coex IE in case we support HT40 channels, as mandated by
section 8.5.13 in IEEE802.11 2012.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: retransmit TDLS teardown packet through AP if not ACKed

Since the TDLS peer station might not receive the teardown
packet (e.g., when in PS), this makes sure the packet is
retransmitted - this time through the AP - if the TDLS peer
didn't ACK the packet.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add "max length of AMPDU" enum for VHT

Maximum length of AMPDU that an STA can receive in VHT.
length = 2 ^ (13 + max_ampdu_length_exp) - 1.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add extended channel switching capability if the driver supports CSA

The Extended Channel Switching capability bit in the extended
capabilities element must be set if the driver supports CSA on
non-beaconing interfaces.

Since this capability needs to be set during driver registration, the
extended_capabiliities global variable needs to be moved to the local
structure so that it can be modified.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: add WMM traffic stream API

Add nl80211 and driver API to validate, add and delete traffic
streams with appropriate settings.

The API calls for userspace doing the action frame handshake
with the peer, and then allows only to set up the parameters
in the driver. To avoid setting up a session only to tear it
down again, the validate API is provided, but the real usage
later can still fail so userspace must be prepared for that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support DTPC IE (from Cisco Client eXtensions)

Linux already supports 802.11h, where the access point can tell the
client to reduce its transmission power. However, 802.11h is only
defined for 5 GHz, where the need for this is much smaller than on
2.4 GHz.

Cisco has their own solution, called DTPC (Dynamic Transmit Power
Control). Cisco APs on a controller sometimes but not always send
802.11h; they always send DTPC, even on 2.4 GHz. This patch adds support
for parsing and honoring the DTPC IE in addition to the 802.11h
element (they do not always contain the same limits, so both must
be honored); the format is not documented, but very simple.

Tested (on top of wireless.git and on 3.16.1) against a Cisco Aironet
1142 joined to a Cisco 2504 WLC, by setting various transmit power
levels for the given access points and observing the results.
The Wireshark 802.11 dissector agrees with the interpretation of the
element, except for negative numbers, which seem to never happen
anyway.

Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

cfg80211: add Intel Mobile Communications copyright

Our legal structure changed at some point (see wikipedia), but
we forgot to immediately switch over to the new copyright
notice.

For files that we have modified in the time since the change,
add the proper copyright notice now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Support parsing TPC report element in action frames

TPC report element is contained in spectrum management's tpc report
action frames and in radio measurement's link measurement report
action frames. Add a function which checks whether an action frame
contains this element. This may be needed by the drivers in order
to set the correct tx power value in these frames.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add TDLS QoS param IE on setup-confirm

When TDLS QoS is supported by the the peer and the local card, add
the WMM parameter IE to the setup-confirm frame. Take the QoS settings
from the current AP, or if unsupported, use the default values from
the specification. This behavior is mandated by IEEE802.11-2012 section
10.22.4.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add API to request TDLS operation from userspace

Write a mac80211 to the cfg80211 API for requesting a userspace TDLS
operation. Define TDLS specific reason codes that can be used here.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: add missing WLAN_EID_BSS_INTOLERANT_CHL_REPORT

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: max MSDU size for DMG networks

In the 802.11ad, aka DMG (Dynamic Multi-Gigabit), aka 60Ghz
spec, maximum MSDU size extended to 7920 bytes.
add #define for this.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: remove function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}

Function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan} have been
replaced with ieee80211_{channel_to_frequency, frequency_to_channel}.

There should be no users of the two functions now. So remove them.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: sort and extend element ID list

The element ID list is currently almost sorted by amendment
or similar topic, but the order is difficult to maintain and
not very transparent. Sort the list by ID instead, and add
a lot of missing IDs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix bufferable MMPDU RX handling

Action, disassoc and deauth frames are bufferable, and as such don't
have the PM bit in the frame control field reserved which means we
need to react to the bit when receiving in such a frame.

Fix this by introducing a new helper ieee80211_is_bufferable_mmpdu()
and using it for the RX path that currently ignores the PM bit in
any non-data frames for doze->wake transitions, but listens to it in
all frames for wake->doze transitions, both of which are wrong.

Also use the new helper in the TX path to clean up the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: add length check in ieee80211_is_robust_mgmt_frame()

A few places weren't checking that the frame passed to the
function actually has enough data even though the function
clearly documents it must have a payload byte. Make this
safer by changing the function to take an skb and checking
the length inside. The old version is preserved for now as
the rtl* drivers use it and don't have a correct skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add definition for SMS4 key len

Add SMS4 key length definition to ieee80211_key_len enum.
It's used by WAPI.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add definition for TDLS wide band extended capability

Seventh bit of 8th byte of extended capabilities specifies wide
bandwidth support for TDLS links. Add this definition to ieee80211.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: enable easier manipulation of VHT beamforming caps

Introduce shift and mask defines for beamformee STS cap and number
of sounding dimensions cap as these can take any 3 bit value.
While at it also cleanup an unrequired parenthesis.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: process the CSA frame for mesh accordingly

Process the CSA frame according to the procedures define in IEEE Std
802.11-2012 section 10.9.8.4.3 as follow:
* The mesh channel switch parameters element (MCSP) must be availabe.
* If the MCSP's TTL is 1, drop the frame but still process the CSA.
* If the MCSP's precedence value is less than or equal to the current
precedence value, drop the frame and do not process the CSA.
* The CSA frame is forwarded after TTL is decremented by 1 and the
initiator field is set to 0. Transmit restrict field and others
are maintained as is.
* No beacon or probe response frame are handled here.

Also, introduce the debug message used for mesh CSA purpose.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: fix vht cap definitions

VHT_CAP_BEAMFORMER_ANTENNAS cap is actually defined in the draft as
VHT_CAP_BEAMFORMEE_STS_MAX, and its size is 3 bits long.

VHT_CAP_SOUNDING_DIMENSIONS is also 3 bits long.

Fix the definitions and change the cap masking accordingly.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: make TU conversion macros available

A few places in the code (mac80211 and iwlmvm) use the same
TU_TO_JIFFIES() macro and could use TU_TO_EXP_TIME() that
mac80211 has. Make these available to everyone and use them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include: Convert ethernet mac address declarations to use ETH_ALEN

It's convenient to have ethernet mac addresses use
ETH_ALEN to be able to grep for them a bit easier and
also to ensure that the addresses are __aligned(2).

Add #include <linux/if_ether.h> as necessary.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ieee80211: add definition for 802.11ac information elements

Add element IDs for Extended BSS Load, VHT TX
Power Envelope, AID, and Quiet Channel.

Signed-off-by: Fred Zhou <fred.zy@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: add definition for interworking support

IEEE802.11u interworking support is advertised via extended
capabilities IE bit 31. This is 7th bit of 4th byte of extended
capabilities.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: set mesh formation field properly

Cap max peerings at 63 in accordance with IEEE-2012 8.4.2.100.7.
Triggers a beacon regeneration every time the number of peerings changes.
Previously this would only happen if the "accepting peerings" bit changed.

Signed-off-by: Jacob Minshall <jacob@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: move crypto constants to ieee80211.h

mac80211 and the Intel drivers all define crypto
constants, move them to ieee80211.h instead.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: parse VHT channel switch IEs

VHT introduces multiple IEs that need to be parsed for a
wide bandwidth channel switch. Two are (currently) needed
in mac80211:
* wide bandwidth channel switch element
* channel switch wrapper element

The former is contained in the latter for beacons and probe
responses, but not for the spectrum management action frames
so the IE parser needs a new argument to differentiate them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: handle extended channel switch announcement

Handle the (public) extended channel switch announcement
action frames. Parts of the data in these frames isn't
really in IEs, but put it into the elems struct anyway
to simplify the handling.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support secondary channel offset in CSA

Add support for the secondary channel offset IE in channel
switch announcements. This is necessary for proper handling
of CSA on HT access points.

For this to work it is also necessary to convert everything
here to use chandef structs instead of just channels. The
driver updates aren't really correct though. In particular,
the TI wl18xx driver update can't possibly be right since
it just ignores the new channel width for lack of firmware
API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support extended channel switch

Support extended channel switch when the operating
class is one of the global operating classes as
defined in Annex E of 802.11-2012. If it isn't,
disconnect from the AP instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: unify CSA action frame/beacon processing

CSA action frame content should be processed as variable IEs
rather than fixed to make it extensible. Unify the code and
process them just like CSA in beacons to make it easier to
extend for HT/VHT.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: parse Timeout Interval Element using a struct

Instead of open-coding the accesses and length check do
the length check in the IE parser and assign a struct
pointer for use in the remaining code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: add P2P Notice of Absence attribute

Add P2P Notice of Absence attribute structure.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: restrict peer's VHT capabilities to own

Implement restricting peer VHT capabilities to the device's own
capabilities. This is useful when a single driver supports more
than one device and the devices have different capabilities
(often they will differ in the number of spatial streams), but
in particular is also necessary for VHT capability overrides to
work correctly -- otherwise it'd be possible to e.g. advertise,
due to overrides, that TX-STBC is not supported, but then still
use it to TX to the AP because it supports RX-STBC.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: remove unused VHT MCS defines

There's an enum with the same values (but slightly
different names except for NOT_SUPPORTED) that is
actually used, so remove the defines.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: mark 802.11 related structs as being 2-byte aligned

Regardless of what header features they use, or if they align the IP
header or not, 802.11 packets from all drivers guarantee a 2-byte
alignment (and there's a debug WARN_ON in case they don't).

Annotate packet structs with __aligned(2) to allow the compiler to use
16-bit load/store operations on platforms with extremely inefficient
unaligned access (e.g. MIPS).

This reduces code size and improves performance on affected platforms
and causes no binary code change on others.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: move sequence number arithmetic to ieee80211.h

Move the sequence number arithmetic code from mac80211 to
ieee80211.h so others can use it. Also rename the functions
from _seq to _sn, they operate on the sequence number, not
the sequence_control field.

Also move macros to convert the sequence control to/from
the sequence number value from various drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: advertise operating mode notification capability

Use the new extended capabilities advertising to advertise
the fact that operating mode notification is supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: constify IE parsing

Make all the parsed IE pointers const, and propagate
the change to all the users etc.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: handle VHT operating mode notification

Handle the operating mode notification action frame.
When the supported streams or the bandwidth change
let the driver and rate control algorithm know.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: define operating mode action frame

Define the action frame format, the VHT category
and its action types and the field format and EID
for operating mode notifications. The frame may
be used outside of VHT context as well, so don't
include "VHT" in the names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: mesh power save basics

Add routines to
- maintain a PS mode for each peer and a non-peer PS mode
- indicate own PS mode in transmitted frames
- track neighbor STAs power modes
- buffer frames when neighbors are in PS mode
- add TIM and Awake Window IE to beacons
- release frames in Mesh Peer Service Periods

Add local_pm to sta_info to represent the link-specific power
mode at this station towards the remote station. When a peer
link is established, use the default power mode stored in mesh
config. Update the PS status if the peering status of a neighbor
changes.
Maintain a mesh power mode for non-peer mesh STAs. Set the
non-peer power mode to active mode during peering. Authenticated
mesh peering is currently not working when either node is
configured to be in power save mode.

Indicate the current power mode in transmitted frames. Use QoS
Nulls to indicate mesh power mode transitions.
For performance reasons, calls to the function setting the frame
flags are placed in HWMP routing routines, as there the STA
pointer is already available.

Add peer_pm to sta_info to represent the peer's link-specific
power mode towards the local station. Add nonpeer_pm to
represent the peer's power mode towards all non-peer stations.
Track power modes based on received frames.

Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS
neighbor counter and group-addressed frame buffer).

Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame
buffering routines in the tx path. Update num_sta_ps to buffer
and release group-addressed frames after DTIM beacons.

Announce the awake window duration in beacons if in light or
deep sleep mode towards any peer or non-peer. Create a TIM IE
similarly to AP mode and add it to mesh beacons. Parse received
Awake Window IEs and check TIM IEs for buffered frames.

Release frames towards peers in mesh Peer Service Periods. Use
the corresponding trigger frames and monitor the MPSP status.
Append a QoS Null as trigger frame if neccessary to properly end
the MPSP. Currently, in HT channels MPSPs behave imperfectly and
show large delay spikes and frame losses.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: define AKM suite selectors type 5, 6 and 7

Reference: IEEE 802.11-2012 8.4.2.27.3 "AKM suites"

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support HT notify channel width action

Support the HT notify channel width action frame
to update the rate scaling about the bandwidth
the peer can receive in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: use __packed in ieee80211.h

Use __packed instead of __attribute__((packed)).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: more 'capability info' bits

define bits for 'capability info', as in recent spec edition
IEEE802.11-2012

Also, add mask for 2-bit field 'bss type', as it is in 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: fix VHT max AMPDU exponent definition

This is really a 3-bit field, not a single bit,
so declare a mask and shift. Also fix hwsim, it
advertises the maximum possible.

While at it reindent all the defines using tabs
instead of spaces.

Change-Id: I7cd81c0d72f76deb5010aba5bfa3dd312006e898
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: support VHT association

Determine the VHT channel from the AP's VHT operation IE
(if present) and configure the hardware to that channel
if it is supported. If channel contexts cause a channel
to not be usable, try a smaller bandwidth.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: add definitions for VHT MCS support

Add definitions for the VHT MCS support values that
are used to indicate, for each number of streams
(1 through 8) which MCSes are supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: move Mesh Capability field definition to ieee80211.h

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
[prefix with IEEE80211_]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: introduce IEEE80211_NUM_TIDS and use it

Introduce IEEE80211_NUM_TIDS in the generic 802.11
header file and use it in place of STA_TID_NUM and
NUM_RX_DATA_QUEUES which are both really the number
of TIDs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: add peer-to-peer related definitions

The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance
OUI and specific P2P OUI type. The payload of this IE consists of
so-called P2P attributes. This patch adds definitions for processing
these attributes.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: remove duplicate enum ieee80211_eid definitions

WLAN_EID_WPA and WLAN_EID_GENERIC mapped to the same value
as WLAN_EID_VENDOR_SPECIFIC. The last one being more in line
with the standard specification. Removing WLAN_EID_WPA and
WLAN_EID_GENERIC as there are no longer drivers using these.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: Rename VHT cap struct

Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap
and renamed its member vht_capabilities_info to vht_cap_info.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: remove obsolete chan no/center freq conversion functions

There are a number of functions that shouldn't really
be used when modern functions that take the band are
available in cfg80211. Remove these, but for now keep
* ieee80211_freq_to_dsss_chan and
* ieee80211_dsss_chan_to_freq
as they're used in older drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: 60g protocol constants

Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories

Introduce GCMP cipher, mandatory by 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wireless: add VHT (802.11ac) definitions

Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFT

WMM and WPS

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: implement the proactive PREQ generation

Generate the proactive PREQ element as defined in
Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012
based on the selection of dot11MeshHWMPRootMode as follow:
dot11MeshHWMPRootMode (2) is proactivePREQnoPREP
dot11MeshHWMPRootMode (3) is proactivePREQwithPREP

The proactive PREQ is generated based on the interval
defined by dot11MeshHWMProotInterval.

With this change, proactive RANN element is now generated
if the dot11MeshHWMPRootMode is set to (4) instead of (1).

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type

Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

{nl,cfg,mac}80211: fix the coding style related to mesh parameters

fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Set the correct values for hwmp (1) and airtimeLinkMetric (1)

Per sections 8.4.2.100.2 and 8.4.2.100.3 of Std 802.11-2012

Reported-by: Shinichi Hotori <hotorinn@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Implement mesh synchronization framework

This patch adds MBSS extensible synchronization framework (Sec.
13.13.2 of IEEE Std. 802.11-2012).

The framework is implemented via an ops table which defines the
following functions:

rx_bcn_presp() - this is called every time a mesh beacon is
received.
adjust_tbtt() - this is called immediately before a beacon is about
to be transmitted.

The default neighbor offset synchronization defined in the standard is
implemented. We also provide template functions for vendor specific
methods.

When neighbor offset synchronization is active (which is the default)
mesh neighbors in the same MBSS will track timing offsets to each other
and compensate clock drift.

In our tests we observed that this mesh synchronization implementation
successfully corrected drifts between stations of ~2PPM while
introducing a jitter of ~20us.

It is also possible to test this framework on mac80211_hwsim simulated
phys to see how it behaves under different topologies, over poor links,
etc.

Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix the sparse warnings on endian handling in RANN propagation

The HWMP sequence number of received RANN element is compared to decide whether to be
propagated. The sequence number is required to covert from 32bit little endian data into
CPUs endianness for comparison. The same applies to the RANN metric.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: rename ht_info to ht_operation

Since some of the HT code pre-dates 802.11n-2009
some names are wrong. The one that bothers me most
is that "HT operation" is called "HT information"
in our code and that causes confusion.

Rename "HT information" to "HT operation" and also
the control_chan field to primary_chan to match
the name used in the spec.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: Introduce ieee80211_is_first_frag

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: accept public action frames with mismatched BSSID

Arik's patch "mac80211: allow action frames with unknown
BSSID in GO mode" allowed any action frames in P2P mode
to go through, but only to cooked monitor interfaces as
the IEEE80211_RX_RA_MATCH was still cleared. As a result
my no-monitor patches broke invitation responses.

Instead of allowing any action frames in P2P GO mode to
go through with a wrong BSSID like that patch did, allow
all public action frames. They will never be processed
by mac80211, but can be reported via nl80211 then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: QoS multicast frames have No Ack policy

Previously QoS multicast frames had the Normal Acknowledgment QoS
control bits set. This would cause broadcast frames to be discarded by
peers with which we have a BA session, since their sequence number would
fall outside the allowed range. Set No Ack QoS control bits on multicast
QoS frames and filter these in de-aggregation code.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>

v2: Use proper QoS Ack Policy ctl field mask (Christian)

v3: Clean up conditional (Johannes)
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: Define cipher suite selector for WPI-SMS4

This value is used for WPI-SMS4 in ISO/IEC JTC 1 N 9880.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: handle HT PHY BSS membership selector value correctly

802.11n-2009 extends the supported rates element with a
magic value which can be used to prevent legacy stations
from joining the BSS.

However, this magic value is not a rate like the others
and the magic can simply be ignored/skipped at this late
stage.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>---
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: handle TDLS high-level commands and frames

Register and implement the TDLS cfg80211 callback functions.

Internally prepare and send TDLS management frames. We incorporate
local STA capabilities and supported rates with extra IEs given by
usermode. The resulting packet is either encapsulated in a data frame,
or assembled as an action frame. It is transmitted either directly or
through the AP, as mandated by the TDLS specification.

Declare support for the TDLS external setup wiphy capability. This
tells usermode to handle link setup and discovery on its own, and use the
kernel driver for sending TDLS mgmt packets.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211: add cfg80211_find_vendor_ie() function

Add function to find vendor-specific ie (along with
vendor-specific ie struct definition and P2P OUI values)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Mesh data frames must have the QoS header

Per sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the
presence of the mesh control header in their QoS header.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: mesh gate implementation

In this implementation, a mesh gate is a root node with a certain bit
set in its RANN flags. The mpath to this root node is marked as a path
to a gate, and added to our list of known gates for this if_mesh. Once a
path discovery process fails, we forward the unresolved frames to a
known gate. Thanks to Luis Rodriguez for refactoring and bug fix help.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: update mesh path selection frame format

Make mesh path selection frames Mesh Action category, remove outdated
Mesh Path Selection category and defines, use updated reason codes, add
mesh_action_is_path_sel for readability, and update/correct path
selection IEs.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add mesh action codes

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: update mesh peering frame format

This patch updates the mesh peering frames to the format specified in
the recently ratified 802.11s standard. Several changes took place to
make this happen:

- Change RX path to handle new self-protected frames
- Add new Peering management IE
- Remove old Peer Link IE
- Remove old plink_action field in ieee80211_mgmt header

These changes by themselves would either break peering, or work by
coincidence, so squash them all into this patch.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: introduce Self Protected Action codes

802.11s introduces a new action frame category, add action codes as well
as an entry in ieee80211_mgmt.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: Introduce defines for BAR TID_INFO & MULTI_TID fields

While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add few wmm tspec values

These are needed by ath6kl for parsing tspec status from an IE.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: unify QoS control field definitions

Move all that mac80211 has into the generic
ieee80211.h header file and use them. At the
same time move them from mask+shift to just
bits and rename them for consistent names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211: don't drop p2p probe responses

Commit 0a35d36 ("cfg80211: Use capability info to detect mesh beacons")
assumed that probe response with both ESS and IBSS bits cleared
means that the frame was sent by a mesh sta.

However, these capabilities are also being used in the p2p_find phase,
and the mesh-validation broke it.

Rename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies
exist before assuming this frame was sent by a mesh sta.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Self-protected management frames are not robust

They may contain encrypted information elements (as AMPE frames do)
but they are not encrypted.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211: Use capability info to detect mesh beacons.

Mesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS,
infrastructure BSS, or IBSS are differentiated by the Capability
Information field in the Beacon frame. A mesh STA sets the ESS and IBSS
subfields to 0 in transmitted Beacon or Probe Response management
frames.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Drop MESH_PLINK category and use new ANA-approved MESH_ACTION

Note: This breaks compatibility with previous mesh protocol instances.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add HT extended capabilities masks

IEEE Std 802.11n, Oct. 29, 2009:
7.3.2.56.5 HT Extended Capabilities field

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add IEEE80211_COUNTRY_STRING_LEN definition

and make use of it in wireless drivers

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro

It is defined in include/linux/ieee80211.h. As per IEEE spec.
bit6 to bit15 in block ack parameter represents buffer size.
So the bitmask should be 0xFFC0.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Cc: stable@kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Remove unused third address from mesh address extension header.

The Mesh Control header only includes 0, 1 or 2 addresses. If there is
one address, it should be interpreted as Address 4. If there are 2,
they are interpreted as Addresses 5 and 6 (Address 4 being the 4th
address in the 802.11 header).

The address extension used to hold up to 3 addresses instead of the current 2.
I'm not sure which draft version changed this, but it is very unlikely that it
will change again given the state of the approval process of this draft. See
section 7.1.3.6.3 in current draft (8.0).

Also, note that the extra address that I'm removing was not being used, so this
change has no effect on over-the-air frame formats. But I thought I better
remove it before someone does start using it.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Let userspace enable and configure vendor specific path selection.

Userspace will now be allowed to toggle between the default path
selection algorithm (HWMP, implemented in the kernel), and a vendor
specific alternative. Also in the same patch, allow userspace to add
information elements to mesh beacons. This is accordance with the
Extensible Path Selection Framework specified in version 7.0 of the
802.11s draft.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add Parameter Set Count bitmask

WMM IE QoS Info field lower 4 bits: Parameter Set Count

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211: add some element IDs in enum ieee80211_eid

1)WLAN_EID_BSS_COEX_2040
2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM
3)WLAN_EID_EXT_CAPABILITY

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Update mesh constants to approved IEEE ANA values

This patch updates IEEE802.11 mesh constants to be consistent with newly
approved values. It modifies some values, as well as adds many new constants
in preparation for updating mesh code to the current 802.11s drafts. ANA
numbers were taken from:
https://mentor.ieee.org/802.11/dcn/09/11-09-0031-12-0000-ana-database-assigned-number-authority.xls

A few notes are in order:
1. This will break backwards compatibility with existing Linux kernels as
over-the-air constants have changed.
2. Some old and obsolete constants have been retained for now as the mesh code
itself hasn't been updated yet to the new 802.11s draft. This was desired to
keep the existing mesh scheme working until it can be updated. Adding the
approved values is the first step in updating the mesh code.
3. Obsolete constants have been clearly marked.
4. All ANA approved 802.11s constants have been added.

Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: add flags for STBC (Space-Time Block Coding)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Moved mesh action codes to a more visible location

Grouped mesh action codes together with the other action codes in
ieee80211.h.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: clean up/fix aggregation code

The aggregation code has a number of quirks, like
inventing an unneeded WLAN_BACK_TIMER value and
leaking memory under certain circumstances during
station destruction. Fix these issues by using
the regular aggregation session teardown code and
blocking new aggregation sessions, all before the
station is really destructed.

As a side effect, this gets rid of the long code
block to destroy aggregation safely.

Additionally, rename tid_state_rx which can only
have the values IDLE and OPERATIONAL to
tid_active_rx to make it easier to understand
that there is no bitwise stuff going on on the
RX side -- the TX side remains because it needs
to keep track of the driver and peer states.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009

ieee80211_hdrlen() should account account new HT Control field in 802.11
data frame header introduced by IEEE 802.11n standard.

According to 802.11n-2009 HT Control field is present in data frames
when both of following are met:

1. It is QoS data frame.
2. Order bit is set in Frame Control field.

The change might be totally compatible with legacy non-11n aware frames,
because 802.11-2007 standard states that "all QoS STAs set this subfield
to 0".

Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net>
Acked-by : Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: add struct ieee80211_hdr_qos

The header can be used to create qos nullfunc frames, for example.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: add U-APSD client support

Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The
idea is that the data frames from the client trigger AP to send the buffered
frames with ACs which have U-APSD enabled. This decreases latency and makes it
possible to save even more power.

Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current
implementation assumes that firmware takes care of the wakeup and
hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported.

Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running
various test traffic with ping.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: add functions to create PS Poll and Nullfunc templates

Some hardware, for example wl1251 and wl1271, handle the transmission
of power save related frames in hardware, but the driver is responsible
for creating the templates. It's better to create the templates in mac80211,
that way all drivers can benefit from this.

Add two new functions, ieee80211_pspoll_get() and ieee80211_nullfunc_get()
which drivers need to call to get the frame. Drivers are also responsible
for updating the templates after each association.

Also new struct ieee80211_hdr_3addr is added to ieee80211.h to make it
easy to calculate length of the Nullfunc frame.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: split up and insert custom IEs correctly

Currently, we insert all user-specified IEs before the HT
IE for association, and after the HT IE for probe requests.
For association, that's correct only if the user-specified
IEs are RSN only, incorrect in all other cases including
WPA. Change this to split apart the user-specified IEs in
two places for association: before the HT IE (e.g. RSN),
after the HT IE (generally empty right now I think?) and
after WMM (all other vendor-specific IEs). For probes,
split the IEs in different places to be correct according
to the spec.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: only bother printing highest data rate on debugfs if its set

IEEE-802.11n spec says the RX highest data rate field does
not specify the highest supported RX data rate if its not set.
Ignore it if not set then. Refer to section 7.3.56.4

Cc: johannes@sipsolutions.net
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: enable spatial multiplexing powersave

Enable spatial multiplexing in mac80211 by telling the
driver what to do and, where necessary, sending action
frames to the AP to update the requested SMPS mode.

Also includes a trivial implementation for hwsim that
just logs the requested mode.

For now, the userspace interface is in debugfs only,
and let you toggle the requested mode at any time.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix peer HT capabilities

I noticed yesterday, because Jeff had noticed
a speed regression, cf. bug
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138
that the SM PS settings for peers were wrong.
Instead of overwriting the SM PS settings with
the local bits, we need to keep the remote bits.

The bug was part of the original HT code from
over two years ago, but unfortunately nobody
noticed that it makes no sense -- we shouldn't
be overwriting the peer's setting with our own
but rather keep it intact when masking the peer
capabilities with our own.

While fixing that, I noticed that the masking of
capabilities is completely useless for most of
the bits, so also fix those other bits.

Finally, I also noticed that PSMP_SUPPORT no
longer exists in the final 802.11n version, so
also remove that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

nl80211: PMKSA caching support

This is an interface to set, delete and flush PMKIDs through nl80211.
Main users would be fullmac devices which firmwares are capable of
generating the RSN IEs for the re-association requests, e.g. iwmc3200wifi.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: use a structure to hold the mesh config information element

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: implement RANN processing and forwarding

Process the RANN (Root Annoucement) Frame and try to find the HWMP
root station by sending a PREQ.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: update meshconf IE

This updates the Mesh Configuration IE according to the latest
draft (3.03).
Notable changes include the simplified protocol IDs.

Signed-off-by: Rui Paulo <rpaulo@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Andrey Yurovsky <andrey@cozybit.com>
Tested-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: also drop qos-nullfunc frames silently

We drop nullfunc frames, but not qos-nullfunc frames,
even though those could be used for PS state control
as well.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Update mesh config IE to 11s draft 3.02

The mesh config information element has changed significantly since draft 1.08
This patch brings it up to date.

Thanks to Sam Leffler and Rui Paulo for identifying this.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Add a few 802.11n defines for AMPDU parameters

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: define AKM suites

We'll need these values for some drivers using connect API
and for wext compat code, so let's define them.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211: use key size constants

Instead of hardcoding the key length for validation, use the
constants Zhu Yi recently added and add one for AES_CMAC too.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: move some utility functions from mac80211 to cfg80211

The patch moves some utility functions from mac80211 to cfg80211.
Because these functions are doing generic 802.11 operations so they
are not mac80211 specific. The moving allows some fullmac drivers
to be also benefit from these utility functions.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Robust Action frame categories for MFP

IEEE 802.11w/D9.0 introduces a mechanism for Action field Category
values to be used to select which Action frames are Robust. Public and
Vendor-specific categories are marked as not Robust in IEEE 802.11w;
HT will be marked not Robust in IEEE 802.11n. A new Vendor-specific
Protected category is allocated for Robust vendor-specific Action
frames. Another new category, Protected Dual of Action, is introduced
for protecting some existing Public Action frames (e.g., IEEE 802.11y
protected enablement).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Update SA Query transaction id length

IEEE 802.11w/D8.0 changed the length of the SA Query transaction
identifier from 16 to 2 octets.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: validate TIM IE length (redux)

The TIM IE must not be shorter than 4 bytes, so verify that
when parsing it and use the proper type. To ease that adjust
struct ieee80211_tim_ie to have a virtual bitmap of size
at least 1.

Also check that the TIM IE is actually present before trying
to parse it!

Because other people may need the function, make it a static
inline in ieee80211.h.

(The original "mac80211: validate TIM IE length" was a minimal fix for
2.6.30. This purports to be the full, correct fix. -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: disable powersave if pm_qos asks for low latency

When an application asks for a latency lower than the beacon interval
there's nothing we can do -- we need to stay awake and not have the
AP buffer frames for us. Add code to automatically calculate this
constraint in mac80211 so drivers need not concern themselves with it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

nl80211: Add MLME primitives to support external SME

This patch adds new nl80211 commands to allow user space to request
authentication and association (and also deauthentication and
disassociation). The commands are structured to allow separate
authentication and association steps, i.e., the interface between
kernel and user space is similar to the MLME SAP interface in IEEE
802.11 standard and an user space application takes the role of the
SME.

The patch introduces MLME-AUTHENTICATE.request,
MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and
MLME-DISASSOCIATE.request primitives. The authentication and
association commands request the actual operations in two steps
(assuming the driver supports this; if not, separate authentication
step is skipped; this could end up being a separate "connect"
command).

The initial implementation for mac80211 uses the current
net/mac80211/mlme.c for actual sending and processing of management
frames and the new nl80211 commands will just stop the current state
machine from moving automatically from authentication to association.
Future cleanup may move more of the MLME operations into cfg80211.

The goal of this design is to provide more control of authentication and
association process to user space without having to move the full MLME
implementation. This should be enough to allow IEEE 802.11r FT protocol
and 802.11s SAE authentication to be implemented. Obviously, this will
also bring the extra benefit of not having to use WEXT for association
requests with mac80211. An example implementation of a user space SME
using the new nl80211 commands is available for wpa_supplicant.

This patch is enough to get IEEE 802.11r FT protocol working with
over-the-air mechanism (over-the-DS will need additional MLME
primitives for handling the FT Action frames).

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211: document DS bit usage

I keep needing this because I'm too stupid to remember it.
Everybody else can probably remember, but who knows :)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Fix MFP Association Comeback to use Timeout Interval IE

The separate Association Comeback Time IE was removed from IEEE 802.11w
and the Timeout Interval IE (from IEEE 802.11r) is used instead. The
editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but
still, the use of Timeout Interval IE is the expected mechanism.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 802.11w - Implement Association Comeback processing

When MFP is enabled, the AP does not allow a STA to associate if an
existing security association exists without first going through SA
Query process. When this happens, the association request is denied
with a new status code ("temporarily rejected") ans Association
Comeback IE is used to notify when the association may be tried again
(i.e., when the SA Query procedure has timed out).

Use the comeback time to update the mac80211 client MLME timer for
next association attempt to minimize waiting time if association is
temporarily rejected.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 802.11w - SA Query processing

Process SA Query Requests for client mode in mac80211. AP side
processing of SA Query Response frames is in user space (hostapd).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 802.11w - Use BIP (AES-128-CMAC)

Add mechanism for managing BIP keys (IGTK) and integrate BIP into the
TX/RX paths.

Signed-off-by: Jouni Malinen <j@w1.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 802.11w - Add BIP (AES-128-CMAC)

Implement Broadcast/Multicast Integrity Protocol for management frame
protection. This patch adds the needed definitions for the new
information element (MMIE) and implementation for the new "encryption"
type (though, BIP is actually not encrypting data, it provides only
integrity protection). These routines will be used by a follow-on patch
that enables BIP for multicast/broadcast robust management frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 802.11w - CCMP for management frames

Extend CCMP to support encryption and decryption of unicast management
frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: Add channel/frequency conversions to ieee80211.h

Added mappings for FHSS, DSSS and OFDM channels - with macros to point
HR DSSS and ERP to the DSSS mappings. Currently just static inline
functions.

Use the new functions in the older fullmac drivers. This eliminates a
number of const static buffers and removes a couple of range checks that
are now redundant.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Richard Farina <sidhayn@gmail.com>
Acked-by: Jeroen Vreeken <pe1rxq@amsat.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: Incorrect LEAP authentication algorithm identifier.

This patch fixes a regression introduced by
"wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts"
LEAP authentication algorithm identifier should be 128.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

cfg80211/mac80211: Add 802.11d support

This adds country IE parsing to mac80211 and enables its usage
within the new regulatory infrastructure in cfg80211. We parse
the country IEs only on management beacons for the BSSID you are
associated to and disregard the IEs when the country and environment
(indoor, outdoor, any) matches the already processed country IE.

To avoid following misinformed or outdated APs we build and use
a regulatory domain out of the intersection between what the AP
provides us on the country IE and what CRDA is aware is allowed
on the same country.

A secondary device is allowed to follow only the same country IE
as it make no sense for two devices on a system to be in two
different countries.

In the case the AP is using country IEs for an incorrect country
the user may help compliance further by setting the regulatory
domain before or after the IE is parsed and in that case another
intersection will be performed.

CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA
present.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211_hwsim: Add support for client PS mode

This introduces a debugfs file (ieee80211/phy#/hwsim/ps) that can be
used to force a simulated radio into power save mode. Following values
can be written into this file to change PS mode:
0 = power save disabled (constantly awake)
1 = power save enabled (drop all frames; do not send PS-Poll)
2 = power save enabled (send PS-Poll frames automatically to receive
buffered unicast frames); not yet fully implemented
3 = manual PS-Poll trigger (send a single PS-Poll frame)

Two different behavior for power save mode processing can be tested:
- move between modes 1 and 0 (i.e., receive all buffered frames at a
time)
- move to mode 1 and use manual PS-Poll frames (write 3 to the 'ps'
debugfs file) to fetch power save buffered frames one at a time

Mode 2 (automatic PS-Poll) does not yet parse Beacon frames, but
eventually, it should take a look at TIM IE and send PS-Poll if a
traffic bit is set for our AID.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: move mesh config length constant

This is a constant from the 802.11 specification.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts

There is quite a lot of overlap in definitions between these headers...

Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: use individual buffers for printing ssid values

Also change escape_ssid to print_ssid to match print_mac semantics.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

802.11: clean up/fix HT support

This patch cleans up a number of things:
* the unusable definition of the HT capabilities/HT information
information elements
* variable names that are hard to understand
* mac80211: move ieee80211_handle_ht to ht.c and remove the unused
enable_ht parameter
* mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht
* mac80211: fix bug with casting the result of ieee80211_bss_get_ie
to an information element _contents_ rather than the
whole element, add size checking (another out-of-bounds
access bug fixed!)
* mac80211: remove some unused return values in favour of BUG_ON
checking
* a few minor other things

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: mesh portal functionality support

Currently the mesh code doesn't support bridging mesh point interfaces
with wired ethernet or AP to construct an MPP or MAP. This patch adds
code to support the "6 address frame format packet" functionality to
mesh point interfaces. Now the mesh network can be used as backhaul
for end to end communication.

Signed-off-by: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: move some HT code out of mlme.c

Some of the HT code in mlme.c is misplaced:
* constants/definitions belong to the ieee80211.h header
* code being used in other modes as well shouldn't be there

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: change MIMO_PS to SM_PS

This patch follows 11n spec naming more rigorously replacing MIMO_PS
with SM_PS (Spatial Multiplexing Power Save).

(Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS",
"iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS",
and "iwlwifi: remove double definition of SM PS". -- JWL)

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: Add an 802.11n definition

This patch adds a HT Capability (DSSS/CCK Mode in 40MHz BSS)
definition to ieee80211.h

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: pass dtim_period to low level driver

This patch adds the dtim_period in ieee80211_bss_conf, this allows the low
level driver to know the dtim_period, and to plan power save accordingly.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: move QOS control helpers into ieee80211.h

Also remove the WLAN_IS_QOS_DATA inline after removing the last
two users. This starts moving away from using rx->fc to using
the header frame_control directly.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: add block ack request capability

This patch adds block ack request capability

Signed-off-by: Ester Kummer <ester.kummer@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 11h - Handling measurement request

This patch handles the 11h measurement request information element.
This is minimal requested implementation - refuse measurement.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: 11h Infrastructure - Parsing

This patch introduces parsing of 11h and 11d related elements from incoming
management frames.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>