#
cc2550b4 |
|
27-Feb-2020 |
afzal mohammed <afzal.mohd.ma@gmail.com> |
clocksource: Replace setup_irq() by request_irq() request_irq() is preferred over setup_irq(). The early boot setup_irq() invocations happen either via 'init_IRQ()' or 'time_init()', while memory allocators are ready by 'mm_init()'. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). Seldom remove_irq() usage has been observed coupled with setup_irq(), wherever that has been found, it too has been replaced by free_irq(). A build error that was reported by kbuild test robot <lkp@intel.com> in the previous version of the patch also has been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
|
#
d2912cb1 |
|
04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
a5a1d1c2 |
|
21-Dec-2016 |
Thomas Gleixner <tglx@linutronix.de> |
clocksource: Use a plain u64 instead of cycle_t There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
|
#
d3d8fee4 |
|
17-Jun-2013 |
John Stultz <john.stultz@linaro.org> |
Revert "dw_apb_timer_of.c: Remove parts that were picoxcell-specific" This reverts commit 55a68c23e0a675b2b8ac2656fd6edbf98b78e4c6. In order to avoid a collision with dw_apb_timer changes in the arm-soc tree, revert this change. I'm leaving it to the arm-soc folks to sort out if they want to keep the other side of the collision or if they're just going to back it all out and try again during the next release cycle. Reported-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
10021488 |
|
04-Jun-2013 |
Heiko Stuebner <heiko@sntech.de> |
clocksource: dw_apb_timer_of: use clocksource_of_init dw_apb_timer_init used to search the devicetree for matching timer devices, making calls to it from board files necessary. Change the dw_apb_timer_init to work with CLOCKSOURCE_OF_DECLARE. With this change the function gets called once for each timer node and tracks these number of calls to attach clockevent and clocksource devices to the nodes. Also remove the calls to dw_apb_timer_init from all previous users, as clocksource_of_init is the default for init_time now. Tested on the upcoming rk3066 code. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
|
#
55a68c23 |
|
07-May-2013 |
Pavel Machek <pavel@denx.de> |
dw_apb_timer_of.c: Remove parts that were picoxcell-specific It seems we made a mistake when creating dw_apb_timer_of.c: picoxcell sched_clock had parts that were not related to dw_apb_timer, yet we moved them to dw_apb_timer_of, and tried to use them on socfpga. This results in system where user/system time is not measured properly, as demonstrated by time dd if=/dev/urandom of=/dev/zero bs=100000 count=100 So this patch switches sched_clock to hardware that exists on both platforms, and adds missing of_node_put() in dw_apb_timer_init(). Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
fc1f7d56 |
|
25-Apr-2013 |
Thomas Gleixner <tglx@linutronix.de> |
clocksource: apb_timer: Remove unsused function Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Link: http://lkml.kernel.org/r/20130425143435.558006195@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
6bb27d73 |
|
08-Nov-2012 |
Stephen Warren <swarren@nvidia.com> |
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
#
66314223 |
|
18-Jul-2012 |
Dinh Nguyen <dinguyen@altera.com> |
ARM: socfpga: initial support for Altera's SOCFPGA platform Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
a1330228 |
|
25-Jul-2011 |
Jamie Iles <jamie@jamieiles.com> |
dw_apb_timer: constify clocksource name The clocksource name should be const for correctness. Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
06c3df49 |
|
05-Jun-2011 |
Jamie Iles <jamie@jamieiles.com> |
clocksource: apb: Share APB timer code with other platforms The APB timers are an IP block from Synopsys (DesignWare APB timers) and are also found in other systems including ARM SoC's. This patch adds functions for creating clock_event_devices and clocksources from APB timers but does not do the resource allocation. This is handled in a higher layer to allow the timers to be created from multiple methods such as platform_devices. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|