#
d4c75a1b |
|
15-Jan-2024 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert remaining kmem_free() to kfree() The remaining callers of kmem_free() are freeing heap memory, so we can convert them directly to kfree() and get rid of kmem_free() altogether. This conversion was done with: $ for f in `git grep -l kmem_free fs/xfs`; do > sed -i s/kmem_free/kfree/ $f > done $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
#
231e8725 |
|
06-Feb-2024 |
Kent Overstreet <kent.overstreet@linux.dev> |
xfs: add support for FS_IOC_GETFSSYSFSPATH Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240207025624.1019754-7-kent.overstreet@linux.dev Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
a4af51ce |
|
06-Feb-2024 |
Kent Overstreet <kent.overstreet@linux.dev> |
fs: super_set_uuid() Some weird old filesytems have UUID-like things that we wish to expose as UUIDs, but are smaller; add a length field so that the new FS_IOC_(GET|SET)UUID ioctls can handle them in generic code. And add a helper super_set_uuid(), for setting nonstandard length uuids. Helper is now required for the new FS_IOC_GETUUID ioctl; if super_set_uuid() hasn't been called, the ioctl won't be supported. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev Signed-off-by: Christian Brauner <brauner@kernel.org>
|
#
646ddf0c |
|
04-Dec-2023 |
Christoph Hellwig <hch@lst.de> |
xfs: clean up the xfs_reserve_blocks interface xfs_reserve_blocks has a very odd interface that can only be explained by it directly deriving from the IRIX fcntl handler back in the day. Split reporting out the reserved blocks out of xfs_reserve_blocks into the only caller that cares. This means that the value reported from XFS_IOC_SET_RESBLKS isn't atomically sampled in the same critical section as when it was set anymore, but as the values could change right after setting them anyway that does not matter. It does provide atomic sampling of both values for XFS_IOC_GET_RESBLKS now, though. Also pass a normal scalar integer value for the requested value instead of the pointless pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
#
1a86a53d |
|
11-Sep-2023 |
Qi Zheng <zhengqi.arch@bytedance.com> |
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
d7a74cad |
|
10-Aug-2023 |
Darrick J. Wong <djwong@kernel.org> |
xfs: track usage statistics of online fsck Track the usage, outcomes, and run times of the online fsck code, and report these values via debugfs. The columns in the file are: * scrubber name * number of scrub invocations * clean objects found * corruptions found * optimizations found * cross referencing failures * inconsistencies found during cross referencing * incomplete scrubs * warnings * number of time scrub had to retry * cumulative amount of time spent scrubbing (microseconds) * number of repair inovcations * successfully repaired objects * cumuluative amount of time spent repairing (microseconds) Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
59f6ab40 |
|
16-Nov-2022 |
Long Li <leo.lilong@huawei.com> |
xfs: fix sb write verify for lazysbcount When lazysbcount is enabled, fsstress and loop mount/unmount test report the following problems: XFS (loop0): SB summary counter sanity check failed XFS (loop0): Metadata corruption detected at xfs_sb_write_verify+0x13b/0x460, xfs_sb block 0x0 XFS (loop0): Unmount and run xfs_repair XFS (loop0): First 128 bytes of corrupted metadata buffer: 00000000: 58 46 53 42 00 00 10 00 00 00 00 00 00 28 00 00 XFSB.........(.. 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 69 fb 7c cd 5f dc 44 af 85 74 e0 cc d4 e3 34 5a i.|._.D..t....4Z 00000030: 00 00 00 00 00 20 00 06 00 00 00 00 00 00 00 80 ..... .......... 00000040: 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00 82 ................ 00000050: 00 00 00 01 00 0a 00 00 00 00 00 04 00 00 00 00 ................ 00000060: 00 00 0a 00 b4 b5 02 00 02 00 00 08 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 0c 09 09 03 14 00 00 19 ................ XFS (loop0): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply +0xe1e/0x10e0 (fs/xfs/xfs_buf.c:1580). Shutting down filesystem. XFS (loop0): Please unmount the filesystem and rectify the problem(s) XFS (loop0): log mount/recovery failed: error -117 XFS (loop0): log mount failed This corruption will shutdown the file system and the file system will no longer be mountable. The following script can reproduce the problem, but it may take a long time. #!/bin/bash device=/dev/sda testdir=/mnt/test round=0 function fail() { echo "$*" exit 1 } mkdir -p $testdir while [ $round -lt 10000 ] do echo "******* round $round ********" mkfs.xfs -f $device mount $device $testdir || fail "mount failed!" fsstress -d $testdir -l 0 -n 10000 -p 4 >/dev/null & sleep 4 killall -w fsstress umount $testdir xfs_repair -e $device > /dev/null if [ $? -eq 2 ];then echo "ERR CODE 2: Dirty log exception during repair." exit 1 fi round=$(($round+1)) done With lazysbcount is enabled, There is no additional lock protection for reading m_ifree and m_icount in xfs_log_sb(), if other cpu modifies the m_ifree, this will make the m_ifree greater than m_icount. For example, consider the following sequence and ifreedelta is postive: CPU0 CPU1 xfs_log_sb xfs_trans_unreserve_and_mod_sb ---------- ------------------------------ percpu_counter_sum(&mp->m_icount) percpu_counter_add_batch(&mp->m_icount, idelta, XFS_ICOUNT_BATCH) percpu_counter_add(&mp->m_ifree, ifreedelta); percpu_counter_sum(&mp->m_ifree) After this, incorrect inode count (sb_ifree > sb_icount) will be writen to the log. In the subsequent writing of sb, incorrect inode count (sb_ifree > sb_icount) will fail to pass the boundary check in xfs_validate_sb_write() that cause the file system shutdown. When lazysbcount is enabled, we don't need to guarantee that Lazy sb counters are completely correct, but we do need to guarantee that sb_ifree <= sb_icount. On the other hand, the constraint that m_ifree <= m_icount must be satisfied any time that there /cannot/ be other threads allocating or freeing inode chunks. If the constraint is violated under these circumstances, sb_i{count,free} (the ondisk superblock inode counters) maybe incorrect and need to be marked sick at unmount, the count will be rebuilt on the next mount. Fixes: 8756a5af1819 ("libxfs: add more bounds checking to sb sanity checks") Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
de94a2e1 |
|
18-Sep-2022 |
Zeng Heng <zengheng4@huawei.com> |
xfs: simplify if-else condition in xfs_validate_new_dalign "else" is not generally useful after a return, so remove them which makes if condition a bit more clear. There is no logical changes. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
0800169e |
|
07-Jul-2022 |
Dave Chinner <dchinner@redhat.com> |
xfs: Pre-calculate per-AG agbno geometry There is a lot of overhead in functions like xfs_verify_agbno() that repeatedly calculate the geometry limits of an AG. These can be pre-calculated as they are static and the verification context has a per-ag context it can quickly reference. In the case of xfs_verify_agbno(), we now always have a perag context handy, so we can store the AG length and the minimum valid block in the AG in the perag. This means we don't have to calculate it on every call and it can be inlined in callers if we move it to xfs_ag.h. Move xfs_ag_block_count() to xfs_ag.c because it's really a per-ag function and not an XFS type function. We need a little bit of rework that is specific to xfs_initialise_perag() to allow growfs to calculate the new perag sizes before we've updated the primary superblock during the grow (chicken/egg situation). Note that we leave the original xfs_verify_agbno in place in xfs_types.c as a static function as other callers in that file do not have per-ag contexts so still need to go the long way. It's been renamed to xfs_verify_agno_agbno() to indicate it takes both an agno and an agbno to differentiate it from new function. Future commits will make similar changes for other per-ag geometry validation functions. Further: $ size --totals fs/xfs/built-in.a text data bss dec hex filename before 1483006 329588 572 1813166 1baaae (TOTALS) after 1482185 329588 572 1812345 1ba779 (TOTALS) This rework reduces the binary size by ~820 bytes, indicating that much less work is being done to bounds check the agbno values against on per-ag geometry information. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
37403796 |
|
26-May-2022 |
Darrick J. Wong <djwong@kernel.org> |
xfs: don't log every time we clear the log incompat flags There's no need to spam the logs every time we clear the log incompat flags -- if someone is periodically using one of these features, they'll be cleared every time the log tries to clean itself, which can get pretty chatty: $ dmesg | grep -i clear [ 5363.894711] XFS (sdd): Clearing log incompat feature flags. [ 5365.157516] XFS (sdd): Clearing log incompat feature flags. [ 5369.388543] XFS (sdd): Clearing log incompat feature flags. [ 5371.281246] XFS (sdd): Clearing log incompat feature flags. These aren't high value messages either -- nothing's gone wrong, and nobody's trying anything tricky. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
2229276c |
|
11-Apr-2022 |
Darrick J. Wong <djwong@kernel.org> |
xfs: use a separate frextents counter for rt extent reservations As mentioned in the previous commit, the kernel misuses sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. This results in the superblock being written to the log with an underestimate of the number of rt extents that are marked free in the rtbitmap. Teaching XFS to recompute frextents after log recovery avoids operational problems in the current mount, but it doesn't solve the problem of us writing undercounted frextents which are then recovered by an older kernel that doesn't have that fix. Create an incore percpu counter to mirror the ondisk frextents. This new counter will track transaction reservations and the only time we will touch the incore super counter (i.e the one that gets logged) is when those transactions commit updates to the rt bitmap. This is in contrast to the lazysbcount counters (e.g. fdblocks), where we know that log recovery will always fix any incorrect counter that we log. As a bonus, we only take m_sb_lock at transaction commit time. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
5a605fd6 |
|
11-Apr-2022 |
Darrick J. Wong <djwong@kernel.org> |
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
b5f17bec |
|
29-Mar-2022 |
Dave Chinner <dchinner@redhat.com> |
xfs: log shutdown triggers should only shut down the log We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
c8c56825 |
|
16-Mar-2022 |
Darrick J. Wong <djwong@kernel.org> |
xfs: don't include bnobt blocks when reserving free block pool xfs_reserve_blocks controls the size of the user-visible free space reserve pool. Given the difference between the current and requested pool sizes, it will try to reserve free space from fdblocks. However, the amount requested from fdblocks is also constrained by the amount of space that we think xfs_mod_fdblocks will give us. If we forget to subtract m_allocbt_blks before calling xfs_mod_fdblocks, it will will return ENOSPC and we'll hang the kernel at mount due to the infinite loop. In commit fd43cf600cf6, we decided that xfs_mod_fdblocks should not hand out the "free space" used by the free space btrees, because some portion of the free space btrees hold in reserve space for future btree expansion. Unfortunately, xfs_reserve_blocks' estimation of the number of blocks that it could request from xfs_mod_fdblocks was not updated to include m_allocbt_blks, so if space is extremely low, the caller hangs. Fix this by creating a function to estimate the number of blocks that can be reserved from fdblocks, which needs to exclude the set-aside and m_allocbt_blks. Found by running xfs/306 (which formats a single-AG 20MB filesystem) with an fstests configuration that specifies a 1k blocksize and a specially crafted log size that will consume 7/8 of the space (17920 blocks, specifically) in that AG. Cc: Brian Foster <bfoster@redhat.com> Fixes: fd43cf600cf6 ("xfs: set aside allocation btree blocks from block reservation") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
7993f1a4 |
|
15-Dec-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: only run COW extent recovery when there are no live extents As part of multiple customer escalations due to file data corruption after copy on write operations, I wrote some fstests that use fsstress to hammer on COW to shake things loose. Regrettably, I caught some filesystem shutdowns due to incorrect rmap operations with the following loop: mount <filesystem> # (0) fsstress <run only readonly ops> & # (1) while true; do fsstress <run all ops> mount -o remount,ro # (2) fsstress <run only readonly ops> mount -o remount,rw # (3) done When (2) happens, notice that (1) is still running. xfs_remount_ro will call xfs_blockgc_stop to walk the inode cache to free all the COW extents, but the blockgc mechanism races with (1)'s reader threads to take IOLOCKs and loses, which means that it doesn't clean them all out. Call such a file (A). When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which walks the ondisk refcount btree and frees any COW extent that it finds. This function does not check the inode cache, which means that incore COW forks of inode (A) is now inconsistent with the ondisk metadata. If one of those former COW extents are allocated and mapped into another file (B) and someone triggers a COW to the stale reservation in (A), A's dirty data will be written into (B) and once that's done, those blocks will be transferred to (A)'s data fork without bumping the refcount. The results are catastrophic -- file (B) and the refcount btree are now corrupt. In the first patch, we fixed the race condition in (2) so that (A) will always flush the COW fork. In this second patch, we move the _recover_cow call to the initial mount call in (0) for safety. As mentioned previously, xfs_reflink_recover_cow walks the refcount btree looking for COW staging extents, and frees them. This was intended to be run at mount time (when we know there are no live inodes) to clean up any leftover staging events that may have been left behind during an unclean shutdown. As a time "optimization" for readonly mounts, we deferred this to the ro->rw transition, not realizing that any failure to clean all COW forks during a rw->ro transition would result in catastrophic corruption. Therefore, remove this optimization and only run the recovery routine when we're guaranteed not to have any COW staging extents anywhere, which means we always run this at mount time. While we're at it, move the callsite to xfs_log_mount_finish because any refcount btree expansion (however unlikely given that we're removing records from the right side of the index) must be fed by a per-AG reservation, which doesn't exist in its current location. Fixes: 174edb0e46e5 ("xfs: store in-progress CoW allocations in the refcount btree") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandan.babu@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
b74e15d7 |
|
16-Sep-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: compute maximum AG btree height for critical reservation calculation Compute the actual maximum AG btree height for deciding if a per-AG block reservation is critically low. This only affects the sanity check condition, since we /generally/ will trigger on the 10% threshold. This is a long-winded way of saying that we're removing one more usage of XFS_BTREE_MAXLEVELS. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
ebd9027d |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert xfs_sb_version_has checks to use mount features This is a conversion of the remaining xfs_sb_version_has..(sbp) checks to use xfs_has_..(mp) feature checks. This was largely done with a vim replacement macro that did: :0,$s/xfs_sb_version_has\(.*\)&\(.*\)->m_sb/xfs_has_\1\2/g<CR> A couple of other variants were also used, and the rest touched up by hand. $ size -t fs/xfs/built-in.a text data bss dec hex filename before 1127533 311352 484 1439369 15f689 (TOTALS) after 1125360 311352 484 1437196 15ee0c (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
75c8c50f |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown Remove the shouty macro and instead use the inline function that matches other state/feature check wrapper naming. This conversion was done with sed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
2e973b2c |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert remaining mount flags to state flags The remaining mount flags kept in m_flags are actually runtime state flags. These change dynamically, so they really should be updated atomically so we don't potentially lose an update due to racing modifications. Convert these remaining flags to be stored in m_opstate and use atomic bitops to set and clear the flags. This also adds a couple of simple wrappers for common state checks - read only and shutdown. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
0560f31a |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert mount flags to features Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
38c26bfd |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: replace xfs_sb_version checks with feature flag checks Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
a1d86e8d |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: reflect sb features in xfs_mount Currently on-disk feature checks require decoding the superblock fileds and so can be non-trivial. We have almost 400 hundred individual feature checks in the XFS code, so this is a significant amount of code. To reduce runtime check overhead, pre-process all the version flags into a features field in the xfs_mount at mount time so we can convert all the feature checks to a simple flag check. There is also a need to convert the dynamic feature flags to update the m_features field. This is required for attr, attr2 and quota features. New xfs_mount based wrappers are added for this. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
e23b55d5 |
|
18-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
908ce71e |
|
08-Aug-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: allow setting and clearing of log incompat feature flags Log incompat feature flags in the superblock exist for one purpose: to protect the contents of a dirty log from replay on a kernel that isn't prepared to handle those dirty contents. This means that they can be cleared if (a) we know the log is clean and (b) we know that there aren't any other threads in the system that might be setting or relying upon a log incompat flag. Therefore, clear the log incompat flags when we've finished recovering the log, when we're unmounting cleanly, remounting read-only, or freezing; and provide a function so that subsequent patches can start using this. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
|
#
40b1de007 |
|
06-Aug-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: throttle inode inactivation queuing on memory reclaim Now that we defer inode inactivation, we've decoupled the process of unlinking or closing an inode from the process of inactivating it. In theory this should lead to better throughput since we now inactivate the queued inodes in batches instead of one at a time. Unfortunately, one of the primary risks with this decoupling is the loss of rate control feedback between the frontend and background threads. In other words, a rm -rf /* thread can run the system out of memory if it can queue inodes for inactivation and jump to a new CPU faster than the background threads can actually clear the deferred work. The workers can get scheduled off the CPU if they have to do IO, etc. To solve this problem, we configure a shrinker so that it will activate the /second/ time the shrinkers are called. The custom shrinker will queue all percpu deferred inactivation workers immediately and set a flag to force frontend callers who are releasing a vfs inode to wait for the inactivation workers. On my test VM with 560M of RAM and a 2TB filesystem, this seems to solve most of the OOMing problem when deleting 10 million inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
6f649091 |
|
06-Aug-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: don't run speculative preallocation gc when fs is frozen Now that we have the infrastructure to switch background workers on and off at will, fix the block gc worker code so that we don't actually run the worker when the filesystem is frozen, same as we do for deferred inactivation. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
65f03d86 |
|
06-Aug-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: queue inactivation immediately when free realtime extents are tight Now that we have made the inactivation of unlinked inodes a background task to increase the throughput of file deletions, we need to be a little more careful about how long of a delay we can tolerate. Similar to the patch doing this for free space on the data device, if the file being inactivated is a realtime file and the realtime volume is running low on free extents, we want to run the worker ASAP so that the realtime allocator can make better decisions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
7d6f07d2 |
|
06-Aug-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: queue inactivation immediately when free space is tight Now that we have made the inactivation of unlinked inodes a background task to increase the throughput of file deletions, we need to be a little more careful about how long of a delay we can tolerate. On a mostly empty filesystem, the risk of the allocator making poor decisions due to fragmentation of the free space on account a lengthy delay in background updates is minimal because there's plenty of space. However, if free space is tight, we want to deallocate unlinked inodes as quickly as possible to avoid fallocate ENOSPC and to give the allocator the best shot at optimal allocations for new writes. Therefore, queue the percpu worker immediately if the filesystem is more than 95% full. This follows the same principle that XFS becomes less aggressive about speculative allocations and lazy cleanup (and more precise about accounting) when nearing full. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
ab23a776 |
|
06-Aug-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
149e53af |
|
06-Aug-2021 |
Christoph Hellwig <hch@lst.de> |
xfs: remove the active vs running quota differentiation These only made a difference when quotaoff supported disabling quota accounting on a mounted file system, so we can switch everyone to use a single set of flags and helpers now. Note that the *QUOTA_ON naming for the helpers is kept as it was the much more commonly used one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
81ed9475 |
|
18-Jun-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes During regular operation, the xfs_inactive operations create transactions with zero block reservation because in general we're freeing space, not asking for more. The per-AG space reservations created at mount time enable us to handle expansions of the refcount btree without needing to reserve blocks to the transaction. Unfortunately, log recovery doesn't create the per-AG space reservations when intent items are being recovered. This isn't an issue for intent item recovery itself because they explicitly request blocks, but any inode inactivation that can happen during log recovery uses the same xfs_inactive paths as regular runtime. If a refcount btree expansion happens, the transaction will fail due to blk_res_used > blk_res, and we shut down the filesystem unnecessarily. Fix this problem by making per-AG reservations temporarily so that we can handle the inactivations, and releasing them at the end. This brings the recovery environment closer to the runtime environment. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
07b6403a |
|
01-Jun-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: move perag structure and setup to libxfs/xfs_ag.[ch] Move the xfs_perag infrastructure to the libxfs files that contain all the per AG infrastructure. This helps set up for passing perags around all the code instead of bare agnos with minimal extra includes for existing files. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
61aa005a |
|
01-Jun-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: prepare for moving perag definitions and support to libxfs The perag structures really need to be defined with the rest of the AG support infrastructure. The struct xfs_perag and init/teardown has been placed in xfs_mount.[ch] because there are differences in the structure between kernel and userspace. Mainly that userspace doesn't have a lot of the internal stuff that the kernel has for caches and discard and other such structures. However, it makes more sense to move this to libxfs than to keep this separation because we are now moving to use struct perags everywhere in the code instead of passing raw agnumber_t values about. Hence we shoudl really move the support infrastructure to libxfs/xfs_ag.[ch]. To do this without breaking userspace, first we need to rearrange the structures and code so that all the kernel specific code is located together. This makes it simple for userspace to ifdef out the all the parts it does not need, minimising the code differences between kernel and userspace. The next commit will do the move... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
9bbafc71 |
|
01-Jun-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: move xfs_perag_get/put to xfs_ag.[ch] They are AG functions, not superblock functions, so move them to the appropriate location. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
#
fd43cf60 |
|
28-Apr-2021 |
Brian Foster <bfoster@redhat.com> |
xfs: set aside allocation btree blocks from block reservation The blocks used for allocation btrees (bnobt and countbt) are technically considered free space. This is because as free space is used, allocbt blocks are removed and naturally become available for traditional allocation. However, this means that a significant portion of free space may consist of in-use btree blocks if free space is severely fragmented. On large filesystems with large perag reservations, this can lead to a rare but nasty condition where a significant amount of physical free space is available, but the majority of actual usable blocks consist of in-use allocbt blocks. We have a record of a (~12TB, 32 AG) filesystem with multiple AGs in a state with ~2.5GB or so free blocks tracked across ~300 total allocbt blocks, but effectively at 100% full because the the free space is entirely consumed by refcountbt perag reservation. Such a large perag reservation is by design on large filesystems. The problem is that because the free space is so fragmented, this AG contributes the 300 or so allocbt blocks to the global counters as free space. If this pattern repeats across enough AGs, the filesystem lands in a state where global block reservation can outrun physical block availability. For example, a streaming buffered write on the affected filesystem continues to allow delayed allocation beyond the point where writeback starts to fail due to physical block allocation failures. The expected behavior is for the delalloc block reservation to fail gracefully with -ENOSPC before physical block allocation failure is a possibility. To address this problem, set aside in-use allocbt blocks at reservation time and thus ensure they cannot be reserved until truly available for physical allocation. This allows alloc btree metadata to continue to reside in free space, but dynamically adjusts reservation availability based on internal state. Note that the logic requires that the allocbt counter is fully populated at reservation time before it is fully effective. We currently rely on the mount time AGF scan in the perag reservation initialization code for this dependency on filesystems where it's most important (i.e. with active perag reservations). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
b2941046 |
|
06-Apr-2021 |
Dave Chinner <dchinner@redhat.com> |
xfs: precalculate default inode attribute offset Default attr fork offset is based on inode size, so is a fixed geometry parameter of the inode. Move it to the xfs_ino_geometry structure and stop calculating it on every call to xfs_default_attroffset(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
#
d336f7eb |
|
02-Mar-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: force log and push AIL to clear pinned inodes when aborting mount If we allocate quota inodes in the process of mounting a filesystem but then decide to abort the mount, it's possible that the quota inodes are sitting around pinned by the log. Now that inode reclaim relies on the AIL to flush inodes, we have to force the log and push the AIL in between releasing the quota inodes and kicking off reclaim to tear down all the incore inodes. Do this by extracting the bits we need from the unmount path and reusing them. As an added bonus, failed writes during a failed mount will not retry forever now. This was originally found during a fuzz test of metadata directories (xfs/1546), but the actual symptom was that reclaim hung up on the quota inodes. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
894ecacf |
|
22-Jan-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: parallelize block preallocation garbage collection Split the block preallocation garbage collection work into per-AG work items so that we can take advantage of parallelization. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
c9a6526f |
|
22-Jan-2021 |
Darrick J. Wong <djwong@kernel.org> |
xfs: rename block gc start and stop functions Shorten the names of the two functions that start and stop block preallocation garbage collection and move them up to the other blockgc functions. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
ea2064da |
|
22-Jan-2021 |
Brian Foster <bfoster@redhat.com> |
xfs: remove xfs_quiesce_attr() xfs_quiesce_attr() is now a wrapper for xfs_log_clean(). Remove it and call xfs_log_clean() directly. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
#
f46e5a17 |
|
22-Jan-2021 |
Brian Foster <bfoster@redhat.com> |
xfs: fold sbcount quiesce logging into log covering xfs_log_sbcount() calls xfs_sync_sb() to sync superblock counters to disk when lazy superblock accounting is enabled. This occurs on unmount, freeze, and read-only (re)mount and ensures the final values are calculated and persisted to disk before each form of quiesce completes. Now that log covering occurs in all of these contexts and uses the same xfs_sync_sb() mechanism to update log state, there is no need to log the superblock separately for any reason. Update the log quiesce path to sync the superblock at least once for any mount where lazy superblock accounting is enabled. If the log is already covered, it will remain in the covered state. Otherwise, the next sync as part of the normal covering sequence will carry the associated superblock update with it. Remove xfs_log_sbcount() now that it is no longer needed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
#
50d25484 |
|
22-Jan-2021 |
Brian Foster <bfoster@redhat.com> |
xfs: sync lazy sb accounting on quiesce of read-only mounts xfs_log_sbcount() syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly. This mechanism works as expected for writable mounts, but xfs_log_sbcount() skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters. Update xfs_log_sbcount() to use the same logic xfs_log_unmount_write() uses to determine when to write an unmount record. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown. Drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. Also, retain the shutdown check in xfs_log_unmount_write() to catch the case where the preceding log force might have triggered a shutdown. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
10fb9ac1 |
|
22-Jan-2021 |
Brian Foster <bfoster@redhat.com> |
xfs: rename xfs_wait_buftarg() to xfs_buftarg_drain() xfs_wait_buftarg() is vaguely named and somewhat overloaded. Its primary purpose is to reclaim all buffers from the provided buffer target LRU. In preparation to refactor xfs_wait_buftarg() into serialization and LRU draining components, rename the function and associated helpers to something more descriptive. This patch has no functional changes with the minor exception of renaming a tracepoint. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
#
595189c2 |
|
18-Nov-2020 |
Yu Kuai <yukuai3@huawei.com> |
xfs: return corresponding errcode if xfs_initialize_perag() fail In xfs_initialize_perag(), if kmem_zalloc(), xfs_buf_hash_init(), or radix_tree_preload() failed, the returned value 'error' is not set accordingly. Reported-as-fixing: 8b26c5825e02 ("xfs: handle ENOMEM correctly during initialisation of perag structures") Fixes: 9b2471797942 ("xfs: cache unlinked pointers in an rhashtable") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
b3f8e08c |
|
01-Sep-2020 |
Christoph Hellwig <hch@lst.de> |
xfs: remove xfs_getsb Merge xfs_getsb into its only caller, and clean that one up a little bit as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
718ecc50 |
|
17-Aug-2020 |
Dave Chinner <dchinner@redhat.com> |
xfs: xfs_iflock is no longer a completion With the recent rework of the inode cluster flushing, we no longer ever wait on the the inode flush "lock". It was never a lock in the first place, just a completion to allow callers to wait for inode IO to complete. We now never wait for flush completion as all inode flushing is non-blocking. Hence we can get rid of all the iflock infrastructure and instead just set and check a state flag. Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the xfs_iflock_nowait() test-and-set operations on that flag, and replace all the xfs_ifunlock() calls to clear operations. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
771915c4 |
|
26-Aug-2020 |
Carlos Maiolino <cmaiolino@redhat.com> |
xfs: remove kmem_realloc() Remove kmem_realloc() function and convert its users to use MM API directly (krealloc()) Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
4d0bab3a |
|
01-Jul-2020 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove SYNC_WAIT from xfs_reclaim_inodes() Clean up xfs_reclaim_inodes() callers. Most callers want blocking behaviour, so just make the existing SYNC_WAIT behaviour the default. For the xfs_reclaim_worker(), just call xfs_reclaim_inodes_ag() directly because we just want optimistic clean inode reclaim to be done in the background. For xfs_quiesce_attr() we can just remove the inode reclaim calls as they are a historic relic that was required to flush dirty inodes that contained unlogged changes. We now log all changes to the inodes, so the sync AIL push from xfs_log_quiesce() called by xfs_quiesce_attr() will do all the required inode writeback for freeze. Seeing as we now want to loop until all reclaimable inodes have been reclaimed, make xfs_reclaim_inodes() loop on the XFS_ICI_RECLAIM_TAG tag rather than having xfs_reclaim_inodes_ag() tell it that inodes were skipped. This is much more reliable and will always loop until all reclaimable inodes are reclaimed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
0e8e2c63 |
|
29-Jun-2020 |
Dave Chinner <dchinner@redhat.com> |
xfs: allow multiple reclaimers per AG Inode reclaim will still throttle direct reclaim on the per-ag reclaim locks. This is no longer necessary as reclaim can run non-blocking now. Hence we can remove these locks so that we don't arbitrarily block reclaimers just because there are more direct reclaimers than there are AGs. This can result in multiple reclaimers working on the same range of an AG, but this doesn't cause any apparent issues. Optimising the spread of concurrent reclaimers for best efficiency can be done in a future patchset. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
f18c9a90 |
|
20-May-2020 |
Dave Chinner <dchinner@redhat.com> |
xfs: reduce free inode accounting overhead Shaokun Zhang reported that XFS was using substantial CPU time in percpu_count_sum() when running a single threaded benchmark on a high CPU count (128p) machine from xfs_mod_ifree(). The issue is that the filesystem is empty when the benchmark runs, so inode allocation is running with a very low inode free count. With the percpu counter batching, this means comparisons when the counter is less that 128 * 256 = 32768 use the slow path of adding up all the counters across the CPUs, and this is expensive on high CPU count machines. The summing in xfs_mod_ifree() is only used to fire an assert if an underrun occurs. The error is ignored by the higher level code. Hence this is really just debug code and we don't need to run it on production kernels, nor do we need such debug checks to return error values just to trigger an assert. Finally, xfs_mod_icount/xfs_mod_ifree are only called from xfs_trans_unreserve_and_mod_sb(), so get rid of them and just directly call the percpu_counter_add/percpu_counter_compare functions. The compare functions are now run only on debug builds as they are internal to ASSERT() checks and so only compiled in when ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y). Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
ec43f6da |
|
27-Apr-2020 |
Eric Sandeen <sandeen@redhat.com> |
xfs: define printk_once variants for xfs messages There are a couple places where we directly call printk_once() and one of them doesn't follow the standard xfs subsystem printk format as a result. #define printk_once variants to go with our existing printk_ratelimited #defines so we can do one-shot printks in a consistent manner. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
3e6e8afd |
|
10-Mar-2020 |
Christoph Hellwig <hch@lst.de> |
xfs: remove XFS_BUF_TO_SBP Just dereference bp->b_addr directly and make the code a little simpler and more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
13eaec4b |
|
11-Dec-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: don't commit sunit/swidth updates to disk if that would cause repair failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
4f5b1b3a |
|
18-Dec-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: split the sunit parameter update into two parts If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
a71895c5 |
|
11-Nov-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: convert open coded corruption check to use XFS_IS_CORRUPT Convert the last of the open coded corruption check and report idioms to use the XFS_IS_CORRUPT macro. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
e1d3d218 |
|
04-Nov-2019 |
Ian Kent <raven@themaw.net> |
xfs: use super s_id instead of struct xfs_mount m_fsname Eliminate struct xfs_mount field m_fsname by using the super block s_id field directly. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
2fcddee8 |
|
28-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
xfs: simplify parsing of allocsize mount option Rework xfs_parseargs to fill out the default value and then parse the option directly into the mount structure, similar to what we do for other updates, and open code the now trivial updates based on on the on-disk superblock directly into xfs_mountfs. Note that this change rejects the allocsize=0 mount option that has been documented as invalid for a long time instead of just ignoring it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
5da8a07c |
|
28-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
xfs: rename the m_writeio_* fields in struct xfs_mount Use the allocsize name to match the mount option and usage instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
3cd1d18b |
|
28-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
xfs: remove the m_readio_* fields in struct xfs_mount m_readio_blocks is entirely unused, and m_readio_blocks is only used in xfs_stat_blksize in a max statements that is a no-op as it always has the same value as m_writeio_log. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
b5ad616c |
|
28-Oct-2019 |
Christoph Hellwig <hch@lst.de> |
xfs: don't use a different allocsice for -o wsync The -o wsync allocsize overwrite overwrite was part of a special hack for NFSv2 servers in IRIX and has no real purpose in modern Linux, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
eb2e9994 |
|
05-Sep-2019 |
Austin Kim <austindh.kim@gmail.com> |
xfs: Use WARN_ON_ONCE for bailout mount-operation If the CONFIG_BUG is enabled, BUG is executed and then system is crashed. However, the bailout for mount is no longer proceeding. Using WARN_ON_ONCE rather than BUG can prevent this situation. Signed-off-by: Austin Kim <austindh.kim@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
707e0dda |
|
26-Aug-2019 |
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> |
fs: xfs: Remove KM_NOSLEEP and KM_SLEEP. Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP, we can remove KM_NOSLEEP and replace KM_SLEEP with 0. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
250d4b4c |
|
28-Jun-2019 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: remove unused header files There are many, many xfs header files which are included but unneeded (or included twice) in the xfs code, so remove them. nb: xfs_linux.h includes about 9 headers for everyone, so those explicit includes get removed by this. I'm not sure what the preference is, but if we wanted explicit includes everywhere, a followup patch could remove those xfs_*.h includes from xfs_linux.h and move them into the files that need them. Or it could be left as-is. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
8c9ce2f7 |
|
12-Jun-2019 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: remove unused flags arg from getsb interfaces The flags value is always passed as 0 so remove the argument. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
490d451f |
|
05-Jun-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: fix inode_cluster_size rounding mayhem inode_cluster_size is supposed to represent the size (in bytes) of an inode cluster buffer. We avoid having to handle multiple clusters per filesystem block on filesystems with large blocks by openly rounding this value up to 1 FSB when necessary. However, we never reset inode_cluster_size to reflect this new rounded value, which adds to the potential for mistakes in calculating geometries. Fix this by setting inode_cluster_size to reflect the rounded-up size if needed, and special-case the few places in the sparse inodes code where we actually need the smaller value to validate on-disk metadata. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
494dba7b |
|
05-Jun-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: refactor inode geometry setup routines Migrate all of the inode geometry setup code from xfs_mount.c into a single libxfs function that we can share with xfsprogs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
ef325959 |
|
05-Jun-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: separate inode geometry Separate the inode geometry information into a distinct structure. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
ed30dcbd |
|
25-Apr-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: rename the speculative block allocation reclaim toggle functions "reclaim" is used throughout the icache code to mean reclamation of incore inode structures. It's also used for two helper functions that toggle background deletion of speculative preallocations. Separate the second of the two uses to make things less confusing. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
9fe82b8c |
|
25-Apr-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: track delayed allocation reservations across the filesystem Add a percpu counter to track the number of blocks directly reserved for delayed allocations on the data device. This counter (in contrast to i_delayed_blks) does not track allocated CoW staging extents or anything going on with the realtime device. It will be used in the upcoming summary counter scrub function to check the free block counts without having to freeze the filesystem or walk all the inodes to find the delayed allocations. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
519841c2 |
|
12-Apr-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: clear BAD_SUMMARY if unmounting an unhealthy filesystem If we know the filesystem metadata isn't healthy during unmount, we want to encourage the administrator to run xfs_repair right away. We can't do this if BAD_SUMMARY will cause an unclean log unmount to force summary recalculation, so turn it off if the fs is bad. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
39353ff6 |
|
12-Apr-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: replace the BAD_SUMMARY mount flag with the equivalent health code Replace the BAD_SUMMARY mount flag with calls to the equivalent health tracking code. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
6772c1f1 |
|
12-Apr-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: track metadata health status Add the necessary in-core metadata fields to keep track of which parts of the filesystem have been observed and which parts were observed to be unhealthy, and print a warning at unmount time if we have unfixed problems. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
9b247179 |
|
07-Feb-2019 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: cache unlinked pointers in an rhashtable Use a rhashtable to cache the unlinked list incore. This should speed up unlinked processing considerably when there are a lot of inodes on the unlinked list because iunlink_remove no longer has to traverse an entire bucket list to find which inode points to the one being removed. The incore list structure records "X.next_unlinked = Y" relations, with the rhashtable using Y to index the records. This makes finding the inode X that points to a inode Y very quick. If our cache fails to find anything we can always fall back on the old method. FWIW this drastically reduces the amount of time it takes to remove inodes from the unlinked list. I wrote a program to open a lot of O_TMPFILE files and then close them in the same order, which takes a very long time if we have to traverse the unlinked lists. With the ptach, I see: + /d/t/tmpfile/tmpfile Opened 193531 files in 6.33s. Closed 193531 files in 5.86s real 0m12.192s user 0m0.064s sys 0m11.619s + cd / + umount /mnt real 0m0.050s user 0m0.004s sys 0m0.030s And without the patch: + /d/t/tmpfile/tmpfile Opened 193588 files in 6.35s. Closed 193588 files in 751.61s real 12m38.853s user 0m0.084s sys 12m34.470s + cd / + umount /mnt real 0m0.086s user 0m0.000s sys 0m0.060s Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
c1b4a321 |
|
12-Dec-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: precalculate cluster alignment in inodes and blocks Store the inode cluster alignment information in units of inodes and blocks in the mount data so that we don't have to keep recalculating them. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
83dcdb44 |
|
12-Dec-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: precalculate inodes and blocks per inode cluster Store the number of inodes and blocks per inode cluster in the mount data so that we don't have to keep recalculating them. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
00d22a1c |
|
10-Aug-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: recalculate summary counters at mount time if icount is bad Since the sb write verifier trips on bad icounts, we should also force a mount time recalculation of the summary counters if the icount is bad. This helps us avoid blowing up at freeze/unmount time when the bad counter gets written back out. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
#
ff23f4af |
|
31-Jul-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: move extent busy tree initialization to xfs_initialize_perag Move the per-AG busy extent tree initialization to the per-ag structure initialization since we don't want online repair to leak the old tree. We only deconstruct the tree at unmount time, so this should be safe. This also enables us to eliminate the commented out initialization in the xfsprogs libxfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
44a8736b |
|
25-Jul-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: clean up IRELE/iput callsites Replace the IRELE macro with a proper function so that we can do proper typechecking and so that we can stop open-coding iput in scrub, which means that we'll be able to ftrace inode lifetimes going through scrub correctly. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
f467cad9 |
|
20-Jul-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: force summary counter recalc at next mount Use the "bad summary count" mount flag from the previous patch to skip writing the unmount record to force log recovery at the next mount, which will recalculate the summary counters for us. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
2e9e6481 |
|
19-Jul-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: detect and fix bad summary counts at mount Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
0b61f8a4 |
|
05-Jun-2018 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
541b5acc |
|
05-Jun-2018 |
Dave Chinner <dchinner@redhat.com> |
xfs: verify root inode more thoroughly When looking up the root inode at mount time, we don't actually do any verification to check that the inode is allocated and accounted for correctly in the INOBT. Make the checks on the root inode more robust by making it an untrusted lookup. This forces the inode lookup to use the inode btree to verify the inode is allocated and mapped correctly to disk. This will also have the effect of catching a significant number of AGI/INOBT related corruptions in AG 0 at mount time. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
d6b636eb |
|
09-May-2018 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: halt auto-reclamation activities while rebuilding rmap Rebuilding the reverse-mapping tree requires us to quiesce all inodes in the filesystem, so we must stop background reclamation of post-EOF and CoW prealloc blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
72c44e35 |
|
23-Mar-2018 |
Brian Foster <bfoster@redhat.com> |
xfs: clean up xfs_mount allocation and dynamic initializers Most of the generic data structures embedded in xfs_mount are dynamically initialized immediately after mp is allocated. A few fields are left out and initialized during the xfs_mountfs() sequence, after mp has been attached to the superblock. To clean this up and help prevent premature access of associated fields, refactor xfs_mount allocation and all dependent init calls into a new helper. This self-documents that all low level data structures (i.e., locks, trees, etc.) should be initialized before xfs_mount is attached to the superblock. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
4603fa74 |
|
06-Mar-2018 |
Eric Sandeen <sandeen@redhat.com> |
xfs: remove unused m_dmevmask from xfs_mount struct The dmevmask structure member is a dmapi leftover; it's set here and there but never actually used. Remove it. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
1da06189 |
|
11-Jan-2018 |
Xiongwei Song <sxwjean@me.com> |
xfs: destroy mutex pag_ici_reclaim_lock before free The mutex pag_ici_reclaim_lock of xfs_perag_t structure is initialized in xfs_initialize_perag. If happen errors in xfs_initialize_perag, or free resources in xfs_free_perag, wo need to destroy the mutex before free perag. Signed-off-by: Xiongwei Song <sxwjean@me.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
2d1d1da3 |
|
08-Nov-2017 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: on failed mount, force-reclaim inodes after unmounting quota controls When mounting fails, we must force-reclaim inodes (and disable delayed reclaim) /after/ the realtime and quota control have let go of the realtime and quota inodes. Without this, we corrupt the timer list and cause other weird problems. Found by xfs/376 fuzzing u3.bmbt[0].lastoff on an rmap filesystem to force a bogus post-eof extent reclaim that causes the fs to go down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
749f24f3 |
|
09-Oct-2017 |
Thomas Meyer <thomas@m3y3r.de> |
xfs: Fix bool initialization/comparison Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
77aff8c7 |
|
10-Aug-2017 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: don't leak quotacheck dquots when cow recovery If we fail a mount on account of cow recovery errors, it's possible that a previous quotacheck left some dquots in memory. The bailout clause of xfs_mountfs forgets to purge these, and so we leak them. Fix that. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
8204f8dd |
|
10-Aug-2017 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: clear MS_ACTIVE after finishing log recovery Way back when we established inode block-map redo log items, it was discovered that we needed to prevent the VFS from evicting inodes during log recovery because any given inode might be have bmap redo items to replay even if the inode has no link count and is ultimately deleted, and any eviction of an unlinked inode causes the inode to be truncated and freed too early. To make this possible, we set MS_ACTIVE so that inodes would not be torn down immediately upon release. Unfortunately, this also results in the quota inodes not being released at all if a later part of the mount process should fail, because we never reclaim the inodes. So, set MS_ACTIVE right before we do the last part of log recovery and clear it immediately after we finish the log recovery so that everything will be torn down properly if we abort the mount. Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
|
#
31965ef3 |
|
20-Jun-2017 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: make errortag a per-mountpoint structure Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
#
104b4e51 |
|
20-Jun-2017 |
Nikolay Borisov <nborisov@suse.com> |
percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch Currently, percpu_counter_add is a wrapper around __percpu_counter_add which is preempt safe due to explicit calls to preempt_disable. Given how __ prefix is used in percpu related interfaces, the naming unfortunately creates the false sense that __percpu_counter_add is less safe than percpu_counter_add. In terms of context-safety, they're equivalent. The only difference is that the __ version takes a batch parameter. Make this a bit more explicit by just renaming __percpu_counter_add to percpu_counter_add_batch. This patch doesn't cause any functional changes. tj: Minor updates to patch description for clarity. Cosmetic indentation updates. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: linux-mm@kvack.org Cc: "David S. Miller" <davem@davemloft.net>
|
#
c8ce540d |
|
16-Jun-2017 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
85787090 |
|
10-May-2017 |
Christoph Hellwig <hch@lst.de> |
fs: switch ->s_uuid to uuid_t For some file systems we still memcpy into it, but in various places this already allows us to use the proper uuid helpers. More to come.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>Â (Changes to IMA/EVM) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
#
d905fdaa |
|
04-May-2017 |
Amir Goldstein <amir73il@gmail.com> |
xfs: use the common helper uuid_is_null() Use the common helper uuid_is_null() and remove the xfs specific helper uuid_is_nil(). The common helper does not check for the NULL pointer value as xfs helper did, but xfs code never calls the helper with a pointer that can be NULL. Conform comments and warning strings to use the term 'null uuid' instead of 'nil uuid', because this is the terminology used by lib/uuid.c and its users. It is also the terminology used in userspace by libuuid and xfsprogs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> [hch: remove now unused uuid.[ch]] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
#
cb0ba6cc |
|
05-May-2017 |
Christoph Hellwig <hch@lst.de> |
xfs: remove uuid_getnodeuniq and xfs_uu_t Opencode uuid_getnodeuniq in the only caller, and directly decode the uuid_t representation instead of using a structure cast for it. Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
8f720d9f |
|
28-Apr-2017 |
Amir Goldstein <amir73il@gmail.com> |
xfs: publish UUID in struct super_block Copy the uuid of the filesystem to struct super_block s_uuid field, as several other filesystems already do. Copy regardless of the nouuid mount option, because other filesystems also do not guaranty uniqueness of the s_uuid field in super_block struct. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
d5825712 |
|
02-Mar-2017 |
Chandan Rajendra <chandan@linux.vnet.ibm.com> |
xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask When block size is larger than inode cluster size, the call to XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs would have set xfs_sb->sb_inoalignmt to 0. Hence in xfs_set_inoalignment(), xfs_mount->m_inoalign_mask gets initialized to -1 instead of 0. However, xfs_mount->m_sinoalign would get correctly intialized to 0 because for every positive value of xfs_mount->m_dalign, the condition "!(mp->m_dalign & mp->m_inoalign_mask)" would evaluate to false. Also, xfs_imap() worked fine even with xfs_mount->m_inoalign_mask having -1 as the value because blks_per_cluster variable would have the value 1 and hence we would never have a need to use xfs_mount->m_inoalign_mask to compute the inode chunk's agbno and offset within the chunk. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
4560e78f |
|
07-Feb-2017 |
Christoph Hellwig <hch@lst.de> |
xfs: don't block the log commit handler for discards Instead we submit the discard requests and use another workqueue to release the extents from the extent busy list. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
ebf55872 |
|
07-Feb-2017 |
Christoph Hellwig <hch@lst.de> |
xfs: improve handling of busy extents in the low-level allocator Currently we force the log and simply try again if we hit a busy extent, but especially with online discard enabled it might take a while after the log force for the busy extents to disappear, and we might have already completed our second pass. So instead we add a new waitqueue and a generation counter to the pag structure so that we can do wakeups once we've removed busy extents, and we replace the single retry with an unconditional one - after all we hold the AGF buffer lock, so no other allocations or frees can be racing with us in this AG. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
b20fe473 |
|
07-Feb-2017 |
Bill O'Donnell <billodo@redhat.com> |
xfs: correct null checks and error processing in xfs_initialize_perag If pag cannot be allocated, the current error exit path will trip a null pointer deference error when calling xfs_buf_hash_destroy with a null pag. Fix this by adding a new error exit labels and jumping to those accordingly, avoiding the hash destroy and unnecessary kmem_free on pag. Up to three things need to be properly unwound: 1) pag memory allocation 2) xfs_buf_hash_init 3) radix_tree_insert For any given iteration through the loop, any of the above which succeed must be unwound for /this/ pag, and then all prior initialized pags must be unwound. Addresses-Coverity-Id: 1397628 ("Dereference after null check") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
#
6031e73a |
|
06-Dec-2016 |
Lucas Stach <dev@lynxeye.de> |
xfs: use rhashtable to track buffer cache On filesystems with a lot of metadata and in metadata intensive workloads xfs_buf_find() is showing up at the top of the CPU cycles trace. Most of the CPU time is spent on CPU cache misses while traversing the rbtree. As the buffer cache does not need any kind of ordering, but fast lookups a hashtable is the natural data structure to use. The rhashtable infrastructure provides a self-scaling hashtable implementation and allows lookups to proceed while the table is going through a resize operation. This reduces the CPU-time spent for the lookups to 1/3 even for small filesystems with a relatively small number of cached buffers, with possibly much larger gains on higher loaded filesystems. [dchinner: reduce minimum hash size to an acceptable size for large filesystems with many AGs with no active use.] [dchinner: remove stale rbtree asserts.] [dchinner: use xfs_buf_map for compare function argument.] [dchinner: make functions static.] [dchinner: remove redundant comments.] Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
d0992452 |
|
19-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: unset MS_ACTIVE if mount fails As part of the inode block map intent log item recovery process, we had to set the IRECOVERY flag to prevent an unlinked inode from being truncated during the first iput call. This required us to set MS_ACTIVE so that iput puts the inode on the lru instead of immediately evicting the inode. Unfortunately, if the mount fails later on, the inodes that have been loaded (root dir and realtime) actually need to be evicted since we're aborting the mount. If we don't clear MS_ACTIVE in the failure step, those inodes are not evicted and therefore leak. The leak was found by running xfs/130 and rmmoding xfs immediately after the test. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
83104d44 |
|
03-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: garbage collect old cowextsz reservations Trim CoW reservations made on behalf of a cowextsz hint if they get too old or we run low on quota, so long as we don't have dirty data awaiting writeback or directio operations in progress. Garbage collection of the cowextsize extents are kept separate from prealloc extent reaping because setting the CoW prealloc lifetime to a (much) higher value than the regular prealloc extent lifetime has been useful for combatting CoW fragmentation on VM hosts where the VMs experience bursty write behaviors and we can keep the utilization ratios low enough that we don't start to run out of space. IOWs, it benefits us to keep the CoW fork reservations around for as long as we can unless we run out of blocks or hit inode reclaim. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
84d69619 |
|
03-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: preallocate blocks for worst-case btree expansion To gracefully handle the situation where a CoW operation turns a single refcount extent into a lot of tiny ones and then run out of space when a tree split has to happen, use the per-AG reserved block pool to pre-allocate all the space we'll ever need for a maximal btree. For a 4K block size, this only costs an overhead of 0.3% of available disk space. When reflink is enabled, we have an unfortunate problem with rmap -- since we can share a block billions of times, this means that the reverse mapping btree can expand basically infinitely. When an AG is so full that there are no free blocks with which to expand the rmapbt, the filesystem will shut down hard. This is rather annoying to the user, so use the AG reservation code to reserve a "reasonable" amount of space for rmap. We'll prevent reflinks and CoW operations if we think we're getting close to exhausting an AG's free space rather than shutting down, but this permanent reservation should be enough for "most" users. Hopefully. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> [hch@lst.de: ensure that we invalidate the freed btree buffer] Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
174edb0e |
|
03-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: store in-progress CoW allocations in the refcount btree Due to the way the CoW algorithm in XFS works, there's an interval during which blocks allocated to handle a CoW can be lost -- if the FS goes down after the blocks are allocated but before the block remapping takes place. This is exacerbated by the cowextsz hint -- allocated reservations can sit around for a while, waiting to get used. Since the refcount btree doesn't normally store records with refcount of 1, we can use it to record these in-progress extents. In-progress blocks cannot be shared because they're not user-visible, so there shouldn't be any conflicts with other programs. This is a better solution than holding EFIs during writeback because (a) EFIs can't be relogged currently, (b) even if they could, EFIs are bound by available log space, which puts an unnecessary upper bound on how much CoW we can have in flight, and (c) we already have a mechanism to track blocks. At mount time, read the refcount records and free anything we find with a refcount of 1 because those were in-progress when the FS went down. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
17c12bcd |
|
03-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: when replaying bmap operations, don't let unlinked inodes get reaped Log recovery will iget an inode to replay BUI items and iput the inode when it's done. Unfortunately, if the inode was unlinked, the iput will see that i_nlink == 0 and decide to truncate & free the inode, which prevents us from replaying subsequent BUIs. We can't skip the BUIs because we have to replay all the redo items to ensure that atomic operations complete. Since unlinked inode recovery will reap the inode anyway, we can safely introduce a new inode flag to indicate that an inode is in this 'unlinked recovery' state and should not be auto-reaped in the drop_inode path. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
1946b91c |
|
03-Oct-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
ddeb14f4 |
|
25-Sep-2016 |
Dave Chinner <dchinner@redhat.com> |
xfs: quiesce the filesystem after recovery on readonly mount Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
52548852 |
|
02-Aug-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: rmap btree requires more reserved free space Originally-From: Dave Chinner <dchinner@redhat.com> The rmap btree is allocated from the AGFL, which means we have to ensure ENOSPC is reported to userspace before we run out of free space in each AG. The last allocation in an AG can cause a full height rmap btree split, and that means we have to reserve at least this many blocks *in each AG* to be placed on the AGFL at ENOSPC. Update the various space calculation functions to handle this. Also, because the macros are now executing conditional code and are called quite frequently, convert them to functions that initialise variables in the struct xfs_mount, use the new variables everywhere and document the calculations better. [darrick.wong@oracle.com: don't reserve blocks if !rmap] [dchinner@redhat.com: update m_ag_max_usable after growfs] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
035e00ac |
|
02-Aug-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: define the on-disk rmap btree format Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
8018026e |
|
02-Aug-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: rmap btree add more reserved blocks Originally-From: Dave Chinner <dchinner@redhat.com> XFS reserves a small amount of space in each AG for the minimum number of free blocks needed for operation. Adding the rmap btree increases the number of reserved blocks, but it also increases the complexity of the calculation as the free inode btree is optional (like the rmbt). Rather than calculate the prealloc blocks every time we need to check it, add a function to calculate it at mount time and store it in the struct xfs_mount, and convert the XFS_PREALLOC_BLOCKS macro just to use the xfs-mount variable directly. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
3ab78df2 |
|
02-Aug-2016 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: rework xfs_bmap_free callers to use xfs_defer_ops Restructure everything that used xfs_bmap_free to use xfs_defer_ops instead. For now we'll just remove the old symbols and play some cpp magic to make it work; in the next patch we'll actually rename everything. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
c891c30a |
|
19-Jul-2016 |
Brian Foster <bfoster@redhat.com> |
xfs: exclude never-released buffers from buftarg I/O accounting The upcoming buftarg I/O accounting mechanism maintains a count of all buffers that have undergone I/O in the current hold-release cycle. Certain buffers associated with core infrastructure (e.g., the xfs_mount superblock buffer, log buffers) are never released, however. This means that accounting I/O submission on such buffers elevates the buftarg count indefinitely and could lead to lockup on unmount. Define a new buffer flag to explicitly exclude buffers from buftarg I/O accounting. Set the flag on the superblock and associated log buffers. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
e6b3bb78 |
|
17-May-2016 |
Carlos Maiolino <cmaiolino@redhat.com> |
xfs: add "fail at unmount" error handling configuration If we take "retry forever" literally on metadata IO errors, we can hang at unmount, once it retries those writes forever. This is the default behavior, unfortunately. Add an error configuration option for this behavior and default it to "fail" so that an unmount will trigger actuall errors, a shutdown and allow the unmount to succeed. It will be noisy, though, as it will log the errors and shutdown that occurs. To fix this, we need to mark the filesystem as being in the process of unmounting. Do this with a mount flag that is added at the appropriate time (i.e. before the blocking AIL sync). We also need to add this flag if mount fails after the initial phase of log recovery has been run. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
192852be |
|
17-May-2016 |
Carlos Maiolino <cmaiolino@redhat.com> |
xfs: configurable error behavior via sysfs We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
664b60f6 |
|
05-Apr-2016 |
Christoph Hellwig <hch@lst.de> |
xfs: improve kmem_realloc Use krealloc to implement our realloc function. This helps to avoid new allocations if we are still in the slab bucket. At least for the bmap btree root that's actually the common case. This also allows removing the now unused oldsize argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
09cbfeaf |
|
01-Apr-2016 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
12c3f05c |
|
01-Mar-2016 |
Eric Sandeen <sandeen@redhat.com> |
xfs: fix up inode32/64 (re)mount handling inode32/inode64 allocator behavior with respect to mount, remount and growfs is a little tricky. The inode32 mount option should only enable the inode32 allocator heuristics if the filesystem is large enough for 64-bit inodes to exist. Today, it has this behavior on the initial mount, but a remount with inode32 unconditionally changes the allocation heuristics, even for a small fs. Also, an inode32 mounted small filesystem should transition to the inode32 allocator if the filesystem is subsequently grown to a sufficient size. Today that does not happen. This patch consolidates xfs_set_inode32 and xfs_set_inode64 into a single new function, and moves the "is the maximum inode number big enough to matter" test into that function, so it doesn't rely on the caller to get it right - which remount did not do, previously. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
b0388bf1 |
|
09-Feb-2016 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove XBF_DONE flag wrapper macros They only set/clear/check a flag, no need for obfuscating this with a macro. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
c19b3b05 |
|
08-Feb-2016 |
Dave Chinner <dchinner@redhat.com> |
xfs: mode di_mode to vfs inode Move the di_mode value from the xfs_icdinode to the VFS inode, reducing the xfs_icdinode byte another 2 bytes and collapsing another 2 byte hole in the structure. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
af3b6382 |
|
02-Nov-2015 |
Darrick J. Wong <darrick.wong@oracle.com> |
xfs: don't leak uuid table on rmmod Don't leak the UUID table when the module is unloaded. (Found with kmemleak.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
225e4635 |
|
12-Oct-2015 |
Bill O'Donnell <billodo@redhat.com> |
xfs: per-filesystem stats in sysfs This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
0ae120f8 |
|
18-Aug-2015 |
Brian Foster <bfoster@redhat.com> |
xfs: clean up root inode properly on mount failure The root inode is read as part of the xfs_mountfs() sequence and the reference is dropped in the event of failure after we grab the inode. The reference drop doesn't necessarily free the inode, however. It marks it for reclaim and potentially kicks off the reclaim workqueue. The workqueue is destroyed further up the error path, which means we are subject to crash if the workqueue job runs after this point or a memory leak which is identified if the xfs_inode_zone is destroyed (e.g., on module removal). Both of these outcomes are reproducible via manual instrumentation of a mount error after the root inode xfs_iget() call in xfs_mountfs(). Update the xfs_mountfs() error path to cancel any potential reclaim work items and to run a synchronous inode reclaim if the root inode is marked for reclaim. This ensures that no jobs remain on the queue before it is destroyed and that the root inode is freed before the reclaim mechanism is torn down. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
f0b2efad |
|
18-Aug-2015 |
Brian Foster <bfoster@redhat.com> |
xfs: don't leave EFIs on AIL on mount failure Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
e5376fc1 |
|
28-May-2015 |
Brian Foster <bfoster@redhat.com> |
xfs: sparse inode chunks feature helpers and mount requirements The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
8c1903d3 |
|
28-May-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: inode and free block counters need to use __percpu_counter_compare Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0 [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580 [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260 [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0 [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250 [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200 [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0 [<ffffffff811f3958>] evict+0xb8/0x190 [<ffffffff811f433b>] iput+0x18b/0x1f0 [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320 [<ffffffff811d548a>] ? filp_close+0x5a/0x80 [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40 [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
964aa8d9 |
|
23-Feb-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove xfs_mod_incore_sb API Now that there are no users of the bitfield based incore superblock modification API, just remove the whole damn lot of it, including all the bitfield definitions. This finally removes a lot of cruft that has been around for a long time. Credit goes to Christoph Hellwig for providing a great patch connecting all the dots to enale us to do this. This patch is derived from that work. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
0bd5dded |
|
23-Feb-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: replace xfs_mod_incore_sb_batched Introduce helper functions for modifying fields in the superblock into xfs_trans.c, the only caller of xfs_mod_incore_sb_batch(). We can then use these directly in xfs_trans_unreserve_and_mod_sb() and so remove another user of the xfs_mode_incore_sb() API without losing any functionality or scalability of the transaction commit code.. Based on a patch from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
bab98bbe |
|
23-Feb-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: introduce xfs_mod_frextents Add a new helper to modify the incore counter of free realtime extents. This matches the helpers used for inode and data block counters, and removes a significant users of the xfs_mod_incore_sb() interface. Based on a patch originally from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
5681ca40 |
|
23-Feb-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: Remove icsb infrastructure Now that the in-core superblock infrastructure has been replaced with generic per-cpu counters, we don't need it anymore. Nuke it from orbit so we are sure that it won't haunt us again... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
0d485ada |
|
23-Feb-2015 |
Dave Chinner <david@fromorbit.com> |
xfs: use generic percpu counters for free block counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
e88b64ea |
|
23-Feb-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: use generic percpu counters for free inode counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free inode counter is not used for any limit enforcement - the per-AG free inode counters are used during allocation to determine if there are inode available for allocation. Hence we don't need any of the complexity of the hand-rolled counters and we can simply replace them with generic per-cpu counters similar to the inode counter. This version introduces a xfs_mod_ifree() helper function from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
501ab323 |
|
23-Feb-2015 |
Dave Chinner <david@fromorbit.com> |
xfs: use generic percpu counters for inode counter XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. There are some warts around the use of them for the inode counter as the hand rolled counter is designed to be accurate at zero, but has no specific accurracy at any other value. This design causes problems for the maximum inode count threshold enforcement, as there is no trigger that balances the counters as they get close tothe maximum threshold. Instead of designing new triggers for balancing, just replace the handrolled per-cpu counter with a generic counter. This enables us to update the counter through the normal superblock modification funtions, but rather than do that we add a xfs_mod_icount() helper function (from Christoph Hellwig) and keep the percpu counter outside the superblock in the struct xfs_mount. This means we still need to initialise the per-cpu counter specifically when we read the superblock, and vice versa when we log/write it, but it does mean that we don't need to change any other code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
074e427b |
|
21-Jan-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: sanitise sb_bad_features2 handling We currently have to ensure that every time we update sb_features2 that we update sb_bad_features2. Now that we log and format the superblock in it's entirety we actually don't have to care because we can simply update the sb_bad_features2 when we format it into the buffer. This removes the need for anything but the mount and superblock formatting code to care about sb_bad_features2, and hence removes the possibility that we forget to update bad_features2 when necessary in the future. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
61e63ecb |
|
21-Jan-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: consolidate superblock logging functions We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
4d11a402 |
|
21-Jan-2015 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove bitfield based superblock updates When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
1a43ec03 |
|
23-Dec-2014 |
Jan Kara <jack@suse.cz> |
xfs: Keep sb_bad_features2 consistent with sb_features2 Currently when we modify sb_features2, we store the same value also in sb_bad_features2. However in most places we forget to mark field sb_bad_features2 for logging and thus it can happen that a change to it is lost. This results in an inconsistent sb_features2 and sb_bad_features2 fields e.g. after xfstests test xfs/187. Fix the problem by changing XFS_SB_FEATURES2 to actually mean both sb_features2 and sb_bad_features2 fields since this is always what we want to log. This isn't ideal because the fact that XFS_SB_FEATURES2 means two fields could cause some problem in future however the code is hopefully less error prone that it is now. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
9a2cc41c |
|
03-Dec-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: move type conversion functions to xfs_dir.h These are currently considered private to libxfs, but they are widely used by the userspace code to decode, walk and check directory structures. Hence they really form part of the external API and as such need to bemoved to xfs_dir2.h. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
508b6b3b |
|
27-Nov-2014 |
Christoph Hellwig <hch@lst.de> |
xfs: merge xfs_inum.h into xfs_format.h Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
4fb6e8ad |
|
27-Nov-2014 |
Christoph Hellwig <hch@lst.de> |
xfs: merge xfs_ag.h into xfs_format.h More on-disk format consolidation. A few declarations that weren't on-disk format related move into better suitable spots. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
6d3ebaae |
|
27-Nov-2014 |
Christoph Hellwig <hch@lst.de> |
xfs: merge xfs_dinode.h into xfs_format.h More consolidatation for the on-disk format defintions. Note that the XFS_IS_REALTIME_INODE moves to xfs_linux.h instead as it is not related to the on disk format, but depends on a CONFIG_ option. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
91ee575f |
|
27-Nov-2014 |
Brian Foster <bfoster@redhat.com> |
xfs: allow lazy sb counter sync during filesystem freeze sequence The expectation since the introduction the lazy superblock counters is that the counters are synced and superblock logged appropriately as part of the filesystem freeze sequence. This does not occur, however, due to the logic in xfs_fs_writable() that prevents progress when the fs is in any state other than SB_UNFROZEN. While this is a bug, it has not been exposed to date because the last thing XFS does during freeze is dirty the log. The log recovery process recalculates the counters from AGI/AGF metadata to ensure everything is correct. Therefore should a crash occur while an fs is frozen, the subsequent log recovery puts everything back in order. See the following commit for reference: 92821e2b [XFS] Lazy Superblock Counters We might not always want to rely on dirtying the log on a frozen fs. Modify xfs_log_sbcount() to proceed when the filesystem is freezing but not once the freeze process has completed. Modify xfs_fs_writable() to accept the minimum freeze level for which modifications should be blocked to support various codepaths. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
ba372674 |
|
01-Oct-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: check xfs_buf_read_uncached returns correctly xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
e3aed1a0 |
|
28-Sep-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: xfs_kset should be static As it is accessed through the struct xfs_mount and can be set up entirely from fs/xfs/xfs_super.c Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
6eee8972 |
|
03-Aug-2014 |
kbuild test robot <fengguang.wu@intel.com> |
xfs: fix coccinelle warnings Removes unneeded semicolon, introduced by commit a70a4fa5 ("xfs: fix a couple error sequence jumps in xfs_mountfs"): fs/xfs/xfs_mount.c:858:24-25: Unneeded semicolon Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
5ef828c4 |
|
03-Aug-2014 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: avoid false quotacheck after unclean shutdown The commit 83e782e xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD added a new function xfs_sb_quota_from_disk() which swaps on-disk XFS_OQUOTA_* flags for in-core XFS_GQUOTA_* and XFS_PQUOTA_* flags after the superblock is read. However, if log recovery is required, the superblock is read again, and the modified in-core flags are re-read from disk, so we have XFS_OQUOTA_* flags in memory again. This causes the XFS_QM_NEED_QUOTACHECK() test to be true, because the XFS_OQUOTA_CHKD is still set, and not XFS_GQUOTA_CHKD or XFS_PQUOTA_CHKD. Change xfs_sb_from_disk to call xfs_sb_quota_from disk and always convert the disk flags to in-memory flags. Add a lower-level function which can be called with "false" to not convert the flags, so that the sb verifier can verify exactly what was on disk, per Brian Foster's suggestion. Reported-by: Cyril B. <cbay@excellency.fr> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
|
#
d5cf09ba |
|
29-Jul-2014 |
Christoph Hellwig <hch@lst.de> |
xfs: require 64-bit sector_t Trying to support tiny disks only and saving a bit memory might have made sense on an SGI O2 15 years ago, but is pretty pointless today. Remove the rarely tested codepath that uses various smaller in-memory types to reduce our test matrix and make the codebase a little bit smaller and less complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
9de67c3b |
|
24-Jul-2014 |
Eric Sandeen <sandeen@redhat.com> |
xfs: allow inode allocations in post-growfs disk space Today, if we perform an xfs_growfs which adds allocation groups, mp->m_maxagi is not properly updated when the growfs is complete. Therefore inodes will continue to be allocated only in the AGs which existed prior to the growfs, and the new space won't be utilized. This is because of this path in xfs_growfs_data_private(): xfs_growfs_data_private xfs_initialize_perag(mp, nagcount, &nagimax); if (mp->m_flags & XFS_MOUNT_32BITINODES) index = xfs_set_inode32(mp); else index = xfs_set_inode64(mp); if (maxagi) *maxagi = index; where xfs_set_inode* iterates over the (old) agcount in mp->m_sb.sb_agblocks, which has not yet been updated in the growfs path. So "index" will be returned based on the old agcount, not the new one, and new AGs are not available for inode allocation. Fix this by explicitly passing the proper AG count (which xfs_initialize_perag() already has) down another level, so that xfs_set_inode* can make the proper decision about acceptable AGs for inode allocation in the potentially newly-added AGs. This has been broken since 3.7, when these two xfs_set_inode* functions were added in commit 2d2194f. Prior to that, we looped over "agcount" not sb_agblocks in these calculations. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
a31b1d3d |
|
14-Jul-2014 |
Brian Foster <bfoster@redhat.com> |
xfs: add xfs_mount sysfs kobject Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
a70a4fa5 |
|
14-Jul-2014 |
Brian Foster <bfoster@redhat.com> |
xfs: fix a couple error sequence jumps in xfs_mountfs() xfs_mountfs() has a couple failure conditions that do not jump to the correct labels. Specifically: - xfs_initialize_perag_data() failure does not deallocate the log even though it occurs after log initialization - xfs_mount_reset_sbqflags() failure returns the error directly rather than jump to the error sequence Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
2451337d |
|
24-Jun-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
b474c7ae |
|
21-Jun-2014 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: Nuke XFS_ERROR macro XFS_ERROR was designed long ago to trap return values, but it's not runtime configurable, it's not consistently used, and we can do similar error trapping with ftrace scripts and triggers from userspace. Just nuke XFS_ERROR and associated bits. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
556b8883 |
|
06-Jun-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: xfs_readsb needs to check for magic numbers Commit daba542 ("xfs: skip verification on initial "guess" superblock read") dropped the use of a verifier for the initial superblock read so we can probe the sector size of the filesystem stored in the superblock. It, however, now fails to validate that what was read initially is actually an XFS superblock and hence will fail the sector size check and return ENOSYS. This causes probe-based mounts to fail because it expects XFS to return EINVAL when it doesn't recognise the superblock format. cc: <stable@vger.kernel.org> Reported-by: Plamen Petrov <plamen.sisi@gmail.com> Tested-by: Plamen Petrov <plamen.sisi@gmail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
0650b554 |
|
05-Jun-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: introduce directory geometry structure The directory code has a dependency on the struct xfs_mount to supply the directory block geometry. Block size, block log size, and other parameters are pre-caclulated in the struct xfs_mount or access directly from the superblock embedded in the struct xfs_mount. Extract all of this geometry information out of the struct xfs_mount and superblock and place it into a new struct xfs_da_geometry defined by the directory code. Allocate and initialise it at mount time, and attach it to the struct xfs_mount so it canbe passed back into the directory code appropriately rather than using the struct xfs_mount. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
263997a6 |
|
19-May-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: turn NLINK feature on by default mkfs has turned on the XFS_SB_VERSION_NLINKBIT feature bit by default since November 2007. It's about time we simply made the kernel code turn it on by default and so always convert v1 inodes to v2 inodes when reading them in from disk or allocating them. This This removes needless version checks and modification when bumping link counts on inodes, and will take code out of a few common code paths. text data bss dec hex filename 783251 100867 616 884734 d7ffe fs/xfs/xfs.o.orig 782664 100867 616 884147 d7db3 fs/xfs/xfs.o.patched Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
c99d609a |
|
05-May-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: fully support v5 format filesystems We have had this code in the kernel for over a year now and have shaken all the known issues out of the code over the past few releases. It's now time to remove the experimental warnings during mount and fully support the new filesystem format in production systems. Remove the experimental warning, and add a version number to the initial "mounting filesystem" message to tell use what type of filesystem is being mounted. Also, remove the temporary inode cluster size output at mount time now we know that this code works fine. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
ac75a1f7 |
|
06-Mar-2014 |
Dave Chinner <dchinner@redhat.com> |
xfs: don't leak EFSBADCRC to userspace While the verifier routines may return EFSBADCRC when a buffer has a bad CRC, we need to translate that to EFSCORRUPTED so that the higher layers treat the error appropriately and we return a consistent error to userspace. This fixes a xfs/005 regression. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
daba5427 |
|
18-Feb-2014 |
Eric Sandeen <sandeen@redhat.com> |
xfs: skip verification on initial "guess" superblock read When xfs_readsb() does the very first read of the superblock, it makes a guess at the length of the buffer, based on the sector size of the underlying storage. This may or may not match the filesystem sector size in sb_sectsize, so we can't i.e. do a CRC check on it; it might be too short. In fact, mounting a filesystem with sb_sectsize larger than the device sector size will cause a mount failure if CRCs are enabled, because we are checksumming a length which exceeds the buffer passed to it. So always read twice; the first time we read with NULL buffer ops to skip verification; then set the proper read length, hook up the proper verifier, and give it another go. Once we are sure that we've got the right buffer length, we can also use bp->b_length in the xfs_sb_read_verify, rather than the less-trusted on-disk sectorsize for secondary superblocks. Before this we ran the risk of passing junk to the crc32c routines, which didn't always handle extreme values. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
|
#
8f80587b |
|
31-Oct-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: increase inode cluster size for v5 filesystems v5 filesystems use 512 byte inodes as a minimum, so read inodes in clusters that are effectively half the size of a v4 filesystem with 256 byte inodes. For v5 fielsystems, scale the inode cluster size with the size of the inode so that we keep a constant 32 inodes per cluster ratio for all inode IO. This only works if mkfs.xfs sets the inode alignment appropriately for larger inode clusters, so this functionality is made conditional on mkfs doing the right thing. xfs_repair needs to know about the inode alignment changes, too. Wall time: create bulkstat find+stat ls -R unlink v4 237s 161s 173s 201s 299s v5 235s 163s 205s 31s 356s patched 234s 160s 182s 29s 317s System time: create bulkstat find+stat ls -R unlink v4 2601s 2490s 1653s 1656s 2960s v5 2637s 2497s 1681s 20s 3216s patched 2613s 2451s 1658s 20s 3007s So, wall time same or down across the board, system time same or down across the board, and cache hit rates all improve except for the ls -R case which is a pure cold cache directory read workload on v5 filesystems... So, this patch removes most of the performance and CPU usage differential between v4 and v5 filesystems on traversal related workloads. Note: while this patch is currently for v5 filesystems only, there is no reason it can't be ported back to v4 filesystems. This hasn't been done here because bringing the code back to v4 requires forwards and backwards kernel compatibility testing. i.e. to deterine if older kernels(*) do the right thing with larger inode alignments but still only using 8k inode cluster sizes. None of this testing and validation on v4 filesystems has been done, so for the moment larger inode clusters is limited to v5 superblocks. (*) a current default config v4 filesystem should mount just fine on 2.6.23 (when lazy-count support was introduced), and so if we change the alignment emitted by mkfs without a feature bit then we have to make sure it works properly on all kernels since 2.6.23. And if we allow it to be changed when the lazy-count bit is not set, then it's all kernels since v2 logs were introduced that need to be tested for compatibility... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
a4fbe6ab |
|
22-Oct-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: decouple inode and bmap btree header files Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
239880ef |
|
22-Oct-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
57062787 |
|
14-Oct-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: unify directory/attribute format definitions The on-disk format definitions for the directory and attribute structures are spread across 3 header files right now, only one of which is dedicated to defining on-disk structures and their manipulation (xfs_dir2_format.h). Pull all the format definitions into a single header file - xfs_da_format.h - and switch all the code over to point at that. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
70a9883c |
|
22-Oct-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
46677e67 |
|
19-Aug-2013 |
Richard Weinberger <richard@nod.at> |
xfs: Register hotcpu notifier after initialization Currently the code initializizes mp->m_icsb_mutex and other things _after_ register_hotcpu_notifier(). As the notifier takes mp->m_icsb_mutex it can happen that it takes the lock before it's initialization. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
c2bfbc9b |
|
11-Aug-2013 |
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> |
xfs: fix the comment of xfs_mountfs() Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
99e738b7 |
|
07-Aug-2013 |
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> |
xfs: fix the comment of xfs_mod_incore_sb_unlocked() Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
0471f62e |
|
07-Aug-2013 |
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> |
xfs: fix the comment of xfs_check_sizes() Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
3d3c8b52 |
|
12-Aug-2013 |
Jie Liu <jeff.liu@oracle.com> |
xfs: refactor xfs_trans_reserve() interface With the new xfs_trans_res structure has been introduced, the log reservation size, log count as well as log flags are pre-initialized at mount time. So it's time to refine xfs_trans_reserve() interface to be more neat. Also, introduce a new helper M_RES() to return a pointer to the mp->m_resv structure to simplify the input. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
e546cb79 |
|
12-Aug-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: consolidate xfs_utils.c There are a few small helper functions in xfs_util, all related to xfs_inode modifications. Move them all to xfs_inode.c so all xfs_inode operations are consiolidated in the one place. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
ff55068c |
|
12-Aug-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: introduce xfs_sb.c for sharing with libxfs xfs_mount.c is shared with userspace, but the only functions that are shared are to do with physical superblock manipulations. This means that less than 25% of the xfs_mount.c code is actually shared with userspace. Move all the superblock functions to xfs_sb.c and share that instead with libxfs. Note that this will leave all the in-core transaction related superblock counter modifications in xfs_mount.c as none of that is shared with userspace. With a few more small changes, xfs_mount.h won't need to be shared with userspace anymore, either. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
2b9ab5ab |
|
12-Aug-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: reshuffle dir2 definitions around for userspace Many of the definitions within xfs_dir2_priv.h are needed in userspace outside libxfs. Definitions within xfs_dir2_priv.h are wholly contained within libxfs, so we need to shuffle some of the definitions around to keep consistency across files shared between user and kernel space. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
6ca1c906 |
|
12-Aug-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: separate dquot on disk format definitions out of xfs_quota.h The on disk format definitions of the on-disk dquot, log formats and quota off log formats are all intertwined with other definitions for quotas. Separate them out into their own header file so they can easily be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
d892d586 |
|
19-Jul-2013 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Start using pquotaino from the superblock. Start using pquotino and define a macro to check if the superblock has pquotino. Keep backward compatibilty by alowing mount of older superblock with no separate pquota inode. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
01026297 |
|
19-Jul-2013 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Initialize all quota inodes to be NULLFSINO mkfs doesn't initialize the quota inodes to NULLFSINO as it does for the other internal inodes. This leads to two in-core values (0 and NULLFSINO) to be checked against, to make sure if a quota inode is valid. Solve that problem by initializing the in-core values of all quotaino values to NULLFSINO if they are 0 in the disk. Note that these values are not written back to on-disk superblock unless some quota is enabled on the filesystem. Even in that case sb_pquotino is written to disk only if the on-disk superblock supports pquotino Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
83e782e1 |
|
27-Jun-2013 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead, start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and PQUOTA respectively. On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Read and write of the superblock does the conversion from *OQUOTA* to *[PG]QUOTA*. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
39a45d84 |
|
02-May-2013 |
Jie Liu <jeff.liu@oracle.com> |
xfs: Remove XFS_MOUNT_RETERR XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)" branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so we always be emitting a warning and returning an error. Hence, we can remove it and get rid of a couple of redundant check up against it at xfs_upate_alignment(). Thanks Dave Chinner for the suggestions of simplify the code in xfs_parseargs(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
34d7f603 |
|
02-May-2013 |
Jie Liu <jeff.liu@oracle.com> |
xfs: Don't keep silent if sunit/swidth can not be changed via mount As per the mount man page, sunit and swidth can be changed via mount options. For XFS, on the face of it, those options seems works if the specified alignments is properly, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt # mount | grep sdb1 /dev/sdb1 on /mnt type xfs (rw,sunit=4096,swidth=8192) However, neither sunit nor swidth is shown from the xfs_info output. # xfs_info /mnt meta-data=/dev/sdb1 isize=256 agcount=4, agsize=262144 blks = sectsz=512 attr=2 data = bsize=4096 blocks=1048576, imaxpct=25 = sunit=0 swidth=0 blks ^^^^^^^^^^^^^^^^^^^^^^^^^^ naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 The reason is that the alignment can only be changed if the relevant super block is already configured with alignments, otherwise, the given value is silently ignored. With this fix, the attempt to mount a storage without strip alignment setup on a super block will get an error with a warning in syslog to indicate the true cause, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ....... XFS (sdb1): cannot change alignment: superblock does not support data alignment Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Mark Tinguely <tinguely@sgi.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
47ad2fcb |
|
27-May-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: don't emit v5 superblock warnings on write We write the superblock every 30s or so which results in the verifier being called. Right now that results in this output every 30s: XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled! Use of these features in this kernel is at your own risk! And spamming the logs. We don't need to check for whether we support v5 superblocks or whether there are feature bits we don't support set as these are only relevant when we first mount the filesytem. i.e. on superblock read. Hence for the write verification we can just skip all the checks (and hence verbose output) altogether. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 34510185abeaa5be9b178a41c0a03d30aec3db7e)
|
#
34510185 |
|
27-May-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: don't emit v5 superblock warnings on write We write the superblock every 30s or so which results in the verifier being called. Right now that results in this output every 30s: XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled! Use of these features in this kernel is at your own risk! And spamming the logs. We don't need to check for whether we support v5 superblocks or whether there are feature bits we don't support set as these are only relevant when we first mount the filesytem. i.e. on superblock read. Hence for the write verification we can just skip all the checks (and hence verbose output) altogether. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
e721f504 |
|
02-Apr-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: implement extended feature masks The version 5 superblock has extended feature masks for compatible, incompatible and read-only compatible feature sets. Implement the masking and mount-time checking for these feature masks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
04a1e6c5 |
|
02-Apr-2013 |
Dave Chinner <dchinner@redhat.com> |
xfs: add CRC checks to the superblock With the addition of CRCs, there is such a wide and varied change to the on disk format that it makes sense to bump the superblock version number rather than try to use feature bits for all the new functionality. This commit introduces all the new superblock fields needed for all the new functionality: feature masks similar to ext4, separate project quota inodes, a LSN field for recovery and the CRC field. This commit does not bump the superblock version number, however. That will be done as a separate commit at the end of the series after all the new functionality is present so we switch it all on in one commit. This means that we can slowly introduce the changes without them being active and hence maintain bisectability of the tree. This patch is based on a patch originally written by myself back from SGI days, which was subsequently modified by Christoph Hellwig. There is relatively little of that patch remaining, but the history of the patch still should be acknowledged here. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
5166ab06 |
|
28-Jan-2013 |
Jeff Liu <jeff.liu@oracle.com> |
xfs: make use of XFS_SB_LOG_RES() at xfs_mount_log_sb() Make use of XFS_SB_LOG_RES() at xfs_mount_log_sb(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
e457274b |
|
28-Jan-2013 |
Jeff Liu <jeff.liu@oracle.com> |
xfs: make use of XFS_SB_LOG_RES() at xfs_log_sbcount() Make use of XFS_SB_LOG_RES() at xfs_log_sbcount(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
b0c10b98 |
|
28-Jan-2013 |
Jeff Liu <jeff.liu@oracle.com> |
xfs: calculate XFS_TRANS_QM_SBCHANGE space log reservation at mount time The transaction log space for clearing/reseting the quota flags is calculated out at runtime, this patch can figure it out at mount time. Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
1bee12b8 |
|
16-Jan-2013 |
Eric Sandeen <sandeen@redhat.com> |
xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magic 9802182 changed the return value from EWRONGFS (aka EINVAL) to EFSCORRUPTED which doesn't seem to be handled properly by the root filesystem probe. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
aeb4f20a |
|
16-Jan-2013 |
Eric Sandeen <sandeen@redhat.com> |
xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magic 9802182 changed the return value from EWRONGFS (aka EINVAL) to EFSCORRUPTED which doesn't seem to be handled properly by the root filesystem probe. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
1813dd64 |
|
13-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert buffer verifiers to an ops structure. To separate the verifiers from iodone functions and associate read and write verifiers at the same time, introduce a buffer verifier operations structure to the xfs_buf. This avoids the need for assigning the write verifier, clearing the iodone function and re-running ioend processing in the read verifier, and gets rid of the nasty "b_pre_io" name for the write verifier function pointer. If we ever need to, it will also be easier to add further content specific callbacks to a buffer with an ops structure in place. We also avoid needing to export verifier functions, instead we can simply export the ops structures for those that are needed outside the function they are defined in. This patch also fixes a directory block readahead verifier issue it exposed. This patch also adds ops callbacks to the inode/alloc btree blocks initialised by growfs. These will need more work before they will work with CRCs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
b0f539de |
|
13-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: connect up write verifiers to new buffers Metadata buffers that are read from disk have write verifiers already attached to them, but newly allocated buffers do not. Add appropriate write verifiers to all new metadata buffers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
612cfbfe |
|
13-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: add pre-write metadata buffer verifier callbacks These verifiers are essentially the same code as the read verifiers, but do not require ioend processing. Hence factor the read verifier functions and add a new write verifier wrapper that is used as the callback. This is done as one large patch for all verifiers rather than one patch per verifier as the change is largely mechanical. This includes hooking up the write verifier via the read verifier function. Hooking up the write verifier for buffers obtained via xfs_trans_get_buf() will be done in a separate patch as that touches code in many different places rather than just the verifier functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
98021821 |
|
12-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: verify superblocks as they are read from disk Add a superblock verify callback function and pass it into the buffer read functions. Remove the now redundant verification code that is currently in use. Adding verification shows that secondary superblocks never have their "sb_inprogress" flag cleared by mkfs.xfs, so when validating the secondary superblocks during a grow operation we have to avoid checking this field. Even if we fix mkfs, we will still have to ignore this field for verification purposes unless a version of mkfs that does not have this bug was used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
eab4e633 |
|
12-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: uncached buffer reads need to return an error With verification being done as an IO completion callback, different errors can be returned from a read. Uncached reads only return a buffer or NULL on failure, which means the verification error cannot be returned to the caller. Split the error handling for these reads into two - a failure to get a buffer will still return NULL, but a read error will return a referenced buffer with b_error set rather than NULL. The caller is responsible for checking the error state of the buffer returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
c3f8fc73 |
|
12-Nov-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: make buffer read verication an IO completion function Add a verifier function callback capability to the buffer read interfaces. This will be used by the callers to supply a function that verifies the contents of the buffer when it is read from disk. This patch does not provide callback functions, but simply modifies the interfaces to allow them to be called. The reason for adding this to the read interfaces is that it is very difficult to tell fom the outside is a buffer was just read from disk or whether we just pulled it out of cache. Supplying a callbck allows the buffer cache to use it's internal knowledge of the buffer to execute it only when the buffer is read from disk. It is intended that the verifier functions will mark the buffer with an EFSCORRUPTED error when verification fails. This allows the reading context to distinguish a verification error from an IO error, and potentially take further actions on the buffer (e.g. attempt repair) based on the error reported. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
579b62fa |
|
06-Nov-2012 |
Brian Foster <bfoster@redhat.com> |
xfs: add background scanning to clear eofblocks inodes Create a new mount workqueue and delayed_work to enable background scanning and freeing of eofblocks inodes. The scanner kicks in once speculative preallocation occurs and stops requeueing itself when no eofblocks inodes exist. The scan interval is based on the new 'speculative_prealloc_lifetime' tunable (default to 5m). The background scanner performs unfiltered, best effort scans (which skips inodes under lock contention or with a dirty cache mapping). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
6d8b79cf |
|
08-Oct-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: rename xfs_sync.[ch] to xfs_icache.[ch] xfs_sync.c now only contains inode reclaim functions and inode cache iteration functions. It is not related to sync operations anymore. Rename to xfs_icache.c to reflect it's contents and prepare for consolidation with the other inode cache file that exists (xfs_iget.c). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
cf2931db |
|
08-Oct-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: Bring some sanity to log unmounting When unmounting the filesystem, there are lots of operations that need to be done in a specific order, and they are spread across across a couple of functions. We have to drain the AIL before we write the unmount record, and we have to shut down the background log work before we do either of them. But this is all split haphazardly across xfs_unmountfs() and xfs_log_unmount(). Move all the AIL flushing and log manipulations to xfs_log_unmount() so that the responisbilities of each function is clear and the operations they perform obvious. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
7e18530b |
|
08-Oct-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: rationalise xfs_mount_wq users Instead of starting and stopping background work on the xfs_mount_wq all at the same time, separate them to where they really are needed to start and stop. The xfs_sync_worker, only needs to be started after all the mount processing has completed successfully, while it needs to be stopped before the log is unmounted. The xfs_reclaim_worker is started on demand, and can be stopped before the unmount process does it's own inode reclaim pass. The xfs_flush_inodes work is run on demand, and so we really only need to ensure that it has stopped running before we start processing an unmount, freeze or remount,ro. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
2d2194f6 |
|
20-Sep-2012 |
Carlos Maiolino <cmaiolino@redhat.com> |
xfs: reduce code duplication handling inode32/64 options Add xfs_set_inode32() to be used to enable inode32 allocation mode. this will reduce the amount of duplicated code needed to mount/remount a filesystem with inode32 option. This patch also changes xfs_set_inode64() to return the maximum AG number that inodes can be allocated instead of set mp->m_maxagi by itself, so that the behaviour is the same as xfs_set_inode32(). This simplifies code that calls these functions and needs to know the maximum AG that inodes can be allocated in. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
d9457dc0 |
|
12-Jun-2012 |
Jan Kara <jack@suse.cz> |
xfs: Convert to new freezing code Generic code now blocks all writers from standard write paths. So we add blocking of all writers coming from ioctl (we get a protection of ioctl against racing remount read-only as a bonus) and convert xfs_file_aio_write() to a non-racy freeze protection. We also keep freeze protection on transaction start to block internal filesystem writes such as removal of preallocated blocks. CC: Ben Myers <bpm@sgi.com> CC: Alex Elder <elder@kernel.org> CC: xfs@oss.sgi.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
9a57fa8e |
|
24-Jul-2012 |
Mark Tinguely <tinguely@sgi.com> |
xfs: wait for the write the superblock on unmount v2: Add the xfs_buf_lock to xfs_quiesce_attr(). Add explaination why xfs_buf_lock() is used to wait for write. xfs_wait_buftarg() does not wait for the completion of the write of the uncached superblock. This write can race with the shutdown of the log and causes a panic if the write does not win the race. During the log write, xfsaild_push() will lock the buffer and set the XBF_ASYNC flag. Because the XBF_FLAG is set, complete() is not performed on the buffer's iowait entry, we cannot call xfs_buf_iowait() to wait for the write to complete. The buffer's lock is held until the write is complete, so we can block on a xfs_buf_lock() request to be notified that the write is complete. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
d2c28191 |
|
07-Jun-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: m_maxioffset is redundant The m_maxioffset field in the struct xfs_mount contains the same value as the superblock s_maxbytes field. There is no need to carry two copies of this limit around, so use the VFS superblock version. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
d4f3512b |
|
22-Apr-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: flush outstanding buffers on log mount failure When we fail to mount the log in xfs_mountfs(), we tear down all the infrastructure we have already allocated. However, the process of mounting the log may have progressed to the point of reading, caching and modifying buffers in memory. Hence before we can free all the infrastructure, we have to flush and remove all the buffers from memory. Problem first reported by Eric Sandeen, later a different incarnation was reported by Ben Myers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
2a0ec1d9 |
|
22-Apr-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: move xfs_get_extsz_hint() and kill xfs_rw.h The only thing left in xfs_rw.h is a function prototype for an inode function. Move that to xfs_inode.h, and kill xfs_rw.h. Also move the function implementing the prototype from xfs_rw.c to xfs_inode.c so we only have one function left in xfs_rw.c Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
e70b73f8 |
|
22-Apr-2012 |
Dave Chinner <dchinner@redhat.com> |
xfs: clean up buffer get/read call API The xfs_buf_get/read API is not consistent in the units it uses, and does not use appropriate or consistent units/types for the variables. Convert the API to use disk addresses and block counts for all buffer get and read calls. Use consistent naming for all the functions and their declarations, and convert the internal functions to use disk addresses and block counts to avoid need to convert them from one type to another and back again. Fix all the callers to use disk addresses and block counts. In many cases, this removes an additional conversion from the function call as the callers already have a block count. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
211e4d43 |
|
22-Apr-2012 |
Christoph Hellwig <hch@infradead.org> |
xfs: implement freezing by emptying the AIL Now that we write back all metadata either synchronously or through the AIL we can simply implement metadata freezing in terms of emptying the AIL. The implementation for this is fairly simply and straight-forward: A new routine is added that asks the xfsaild to push the AIL to the end and waits for it to complete and send a wakeup. The routine will then loop if the AIL is not actually empty, and continue to do so until the AIL is compeltely empty. We keep an inode reclaim pass in the freeze process to avoid having memory pressure have to reclaim inodes that require dirtying the filesystem to be reclaimed after the freeze has completed. This means we can also treat unmount in the exact same way as freeze. As an upside we can now remove the radix tree based inode writeback and xfs_unmountfs_writesb. [ Dave Chinner: - Cleaned up commit message. - Added inode reclaim passes back into freeze. - Cleaned up wakeup mechanism to avoid the use of a new sleep counter variable. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
6bd92a23 |
|
23-Jan-2012 |
Chandra Seetharaman <sekharan@us.ibm.com> |
Change xfs_sb_from_disk() interface to take a mount pointer Change xfs_sb_from_disk() interface to take a mount pointer instead of a superblock pointer. This is to print mount point specific error messages in future fixes. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
021000e5 |
|
12-Jan-2012 |
Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> |
xfs: show uuid when mount fails due to duplicate uuid When a system tries to mount a filesystem (FS) using UUID, the xfs returns -EINVAL and shows a message if a FS with the same UUID has been already mounted. It is useful to output the duplicate UUID with it. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
|
#
a9add83e |
|
10-Oct-2011 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove XFS_bflush Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
901796af |
|
10-Oct-2011 |
Christoph Hellwig <hch@infradead.org> |
xfs: clean up xfs_ioerror_alert Instead of passing the block number and mount structure explicitly get them off the bp and fix make the argument order more natural. Also move it to xfs_buf.c and stop printing the device name given that we already get the fs name as part of xfs_alert, and we know what device is operates on because of the caller that gets printed, finally rename it to xfs_buf_ioerror_alert and pass __func__ as argument where it makes sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
87c7bec7 |
|
14-Sep-2011 |
Christoph Hellwig <hch@infradead.org> |
xfs: fix buffer flushing during unmount The code to flush buffers in the umount code is a bit iffy: we first flush all delwri buffers out, but then might be able to queue up a new one when logging the sb counts. On a normal shutdown that one would get flushed out when doing the synchronous superblock write in xfs_unmountfs_writesb, but we skip that one if the filesystem has been shut down. Fix this by moving the delwri list flushing until just before unmounting the log, and while we're at it also remove the superflous delwri list and buffer lru flusing for the rt and log device that can never have cached or delwri buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Amit Sahrawat <amit.sahrawat83@gmail.com> Tested-by: Amit Sahrawat <amit.sahrawat83@gmail.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
61551f1e |
|
23-Aug-2011 |
Christoph Hellwig <hch@infradead.org> |
xfs: call xfs_buf_delwri_queue directly Unify the ways we add buffers to the delwri queue by always calling xfs_buf_delwri_queue directly. The xfs_bdwrite functions is removed and opencoded in its callers, and the two places setting XBF_DELWRI while a buffer is locked and expecting xfs_buf_unlock to pick it up are converted to call xfs_buf_delwri_queue directly, too. Also replace the XFS_BUF_UNDELAYWRITE macro with direct calls to xfs_buf_delwri_dequeue to make the explicit queuing/dequeuing more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
abbede1b |
|
26-Jul-2011 |
Al Viro <viro@zeniv.linux.org.uk> |
xfs: get rid of open-coded S_ISREG(), etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
49074c06 |
|
22-Jul-2011 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Remove the macro XFS_BUF_TARGET Remove the definition and usages of the macro XFS_BUF_TARGET Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
72790aa1 |
|
22-Jul-2011 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Remove macro XFS_BUF_HOLD Remove the definition and usage of the macro XFS_BUF_HOLD Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
adab0f67 |
|
29-Jun-2011 |
Chandra Seetharaman <sekharan@us.ibm.com> |
xfs: Remove the second parameter to xfs_sb_count() Remove the second parameter to xfs_sb_count() since all callers of the function set them. Also, fix the header comment regarding it being called periodically. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
ea15ab3c |
|
13-Jul-2011 |
Christoph Hellwig <hch@lst.de> |
xfs: remove the dead QUOTADEBUG code Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
b2ce3974 |
|
11-Jul-2011 |
Alex Elder <aelder@sgi.com> |
Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc" This reverts commit 7a249cf83da1813cfa71cfe1e265b40045eceb47. That commit created a situation that could lead to a filesystem hang. As Dave Chinner pointed out, xfs_trans_alloc() could hold a reference to m_active_trans (i.e., keep it non-zero) and then wait for SB_FREEZE_TRANS to complete. Meanwhile a filesystem freeze request could set SB_FREEZE_TRANS and then wait for m_active_trans to drop to zero. Nobody benefits from this sequence of events... Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
c0e090ce |
|
20-May-2011 |
Eric Sandeen <sandeen@redhat.com> |
xfs: consolidate & clarify mount sanity checks Pavol pointed out that there is one silent error case in the mount path, and that others are rather uninformative. I've taken Pavol's suggested patch and extended it a bit to also: * fix a message which says "turned off" but actually errors out * consolidate the vaguely differentiated "SB sanity check [12]" messages, and hexdump the superblock for analysis Original-patch-by: Pavol Gono <Pavol.Gono@siemens.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
0c842ad4 |
|
08-Jul-2011 |
Christoph Hellwig <hch@lst.de> |
xfs: clean up buffer locking helpers Rename xfs_buf_cond_lock and reverse it's return value to fit most other trylock operations in the Kernel and XFS (with the exception of down_trylock, after which xfs_buf_cond_lock was modelled), and replace xfs_buf_lock_val with an xfs_buf_islocked for use in asserts, or and opencoded variant in tracing. remove the XFS_BUF_* wrappers for all the locking helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
7a249cf8 |
|
08-Jul-2011 |
Christoph Hellwig <hch@lst.de> |
xfs: fix filesystsem freeze race in xfs_trans_alloc As pointed out by Jan xfs_trans_alloc can race with a concurrent filesystem freeze when it sleeps during the memory allocation. Fix this by moving the wait_for_freeze call after the memory allocation. This means moving the freeze into the low-level _xfs_trans_alloc helper, which thus grows a new argument. Also fix up some comments in that area while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
45c51b99 |
|
13-Apr-2011 |
David Sterba <dsterba@suse.cz> |
xfs: cleanup duplicate initializations follow these guidelines: - leave initialization in the declaration block if it fits the line - move to the code where it's more suitable ('for' init block) The last chunk was modified from David's original to be a correct fix for what appeared to be a duplicate initialization. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
0b932ccc |
|
06-Mar-2011 |
Dave Chinner <dchinner@redhat.com> |
xfs: Convert remaining cmn_err() callers to new API Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
53487786 |
|
06-Mar-2011 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert xfs_fs_cmn_err to new error logging API Continue to clean up the error logging code by converting all the callers of xfs_fs_cmn_err() to the new API. Once done, remove the unused old API function. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
af34e09d |
|
06-Mar-2011 |
Dave Chinner <dchinner@redhat.com> |
xfs: kill xfs_fs_mount_cmn_err() macro The xfs_fs_mount_cmn_err() hides a simple check as to whether the mount path should output an error or not. Remove the macro and open code the check. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
1a427ab0 |
|
15-Dec-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert pag_ici_lock to a spin lock now that we are using RCU protection for the inode cache lookups, the lock is only needed on the modification side. Hence it is not necessary for the lock to be a rwlock as there are no read side holders anymore. Convert it to a spin lock to reflect it's exclusive nature. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
055388a3 |
|
03-Jan-2011 |
Dave Chinner <dchinner@redhat.com> |
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size Ñ–s reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
|
#
f83282a8 |
|
08-Nov-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: fix per-ag reference counting in inode reclaim tree walking The walk fails to decrement the per-ag reference count when the non-blocking walk fails to obtain the per-ag reclaim lock, leading to an assert failure on debug kernels when unmounting a filesystem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
1a1a3e97 |
|
06-Oct-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove xfs_buf wrappers Stop having two different names for many buffer functions and use the more descriptive xfs_buf_* names directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
1b040712 |
|
29-Sep-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters Update the per-cpu counters manually in xfs_trans_unreserve_and_mod_sb and remove support for per-cpu counters from xfs_mod_incore_sb_batch to simplify it. And added benefit is that we don't have to take m_sb_lock for transactions that only modify per-cpu counters. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
96540c78 |
|
29-Sep-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: do not use xfs_mod_incore_sb for per-cpu counters Export xfs_icsb_modify_counters and always use it for modifying the per-cpu counters. Remove support for per-cpu counters from xfs_mod_incore_sb to simplify it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
61ba35de |
|
29-Sep-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove XFS_MOUNT_NO_PERCPU_SB Fail the mount if we can't allocate memory for the per-CPU counters. This is consistent with how we handle everything else in the mount path and makes the superblock counter modification a lot simpler. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
74f75a0c |
|
24-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: convert buffer cache hash to rbtree The buffer cache hash is showing typical hash scalability problems. In large scale testing the number of cached items growing far larger than the hash can efficiently handle. Hence we need to move to a self-scaling cache indexing mechanism. I have selected rbtrees for indexing becuse they can have O(log n) search scalability, and insert and remove cost is not excessive, even on large trees. Hence we should be able to cache large numbers of buffers without incurring the excessive cache miss search penalties that the hash is imposing on us. To ensure we still have parallel access to the cache, we need multiple trees. Rather than hashing the buffers by disk address to select a tree, it seems more sensible to separate trees by typical access patterns. Most operations use buffers from within a single AG at a time, so rather than searching lots of different lists, separate the buffer indexes out into per-AG rbtrees. This means that searches during metadata operation have a much higher chance of hitting cache resident nodes, and that updates of the tree are less likely to disturb trees being accessed on other CPUs doing independent operations. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
69b491c2 |
|
26-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: serialise inode reclaim within an AG Memory reclaim via shrinkers has a terrible habit of having N+M concurrent shrinker executions (N = num CPUs, M = num kswapds) all trying to shrink the same cache. When the cache they are all working on is protected by a single spinlock, massive contention an slowdowns occur. Wrap the per-ag inode caches with a reclaim mutex to serialise reclaim access to the AG. This will block concurrent reclaim in each AG but still allow reclaim to scan multiple AGs concurrently. Allow shrinkers to move on to the next AG if it can't get the lock, and if we can't get any AG, then start blocking on locks. To prevent reclaimers from continually scanning the same inodes in each AG, add a cursor that tracks where the last reclaim got up to and start from that point on the next reclaim. This should avoid only ever scanning a small number of inodes at the satart of each AG and not making progress. If we have a non-shrinker based reclaim pass, ignore the cursor and reset it to zero once we are done. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
65d0f205 |
|
24-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: split inode AG walking into separate code for reclaim The reclaim walk requires different locking and has a slightly different walk algorithm, so separate it out so that it can be optimised separately. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
1922c949 |
|
21-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: use unhashed buffers for size checks When we are checking we can access the last block of each device, we do not need to use cached buffers as they will be tossed away immediately. Use uncached buffers for size checks so that all IO prior to full in-memory structure initialisation does not use the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
26af6552 |
|
21-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: kill XBF_FS_MANAGED buffers Filesystem level managed buffers are buffers that have their lifecycle controlled by the filesystem layer, not the buffer cache. We currently cache these buffers, which makes cleanup and cache walking somewhat troublesome. Convert the fs managed buffers to uncached buffers obtained by via xfs_buf_get_uncached(), and remove the XBF_FS_MANAGED special cases from the buffer cache. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
e176579e |
|
21-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: lockless per-ag lookups When we start taking a reference to the per-ag for every cached buffer in the system, kernel lockstat profiling on an 8-way create workload shows the mp->m_perag_lock has higher acquisition rates than the inode lock and has significantly more contention. That is, it becomes the highest contended lock in the system. The perag lookup is trivial to convert to lock-less RCU lookups because perag structures never go away. Hence the only thing we need to protect against is tree structure changes during a grow. This can be done simply by replacing the locking in xfs_perag_get() with RCU read locking. This removes the mp->m_perag_lock completely from this path. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
bd32d25a |
|
21-Sep-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove debug assert for per-ag reference counting When we start taking references per cached buffer to the the perag it is cached on, it will blow the current debug maximum reference count assert out of the water. The assert has never caught a bug, and we have tracing to track changes if there ever is a problem, so just remove it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
|
#
3400777f |
|
23-Jun-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove unneeded #include statements Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
288699fe |
|
23-Jun-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: drop dmapi hooks Dmapi support was never merged upstream, but we still have a lot of hooks bloating XFS for it, all over the fast pathes of the filesystem. This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM support in mainline at least the namespace events can be done much saner in the VFS instead of the individual filesystem, so it's not like this is much help for future work. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
#
7b6259e7 |
|
23-Jun-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: remove block number from inode lookup code The block number comes from bulkstat based inode lookups to shortcut the mapping calculations. We ar enot able to trust anything from bulkstat, so drop the block number as well so that the correct lookups and mappings are always done. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
fb3b504a |
|
28-May-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: fix access to upper inodes without inode64 If a filesystem is mounted without the inode64 mount option we should still be able to access inodes not fitting into 32 bits, just not created new ones. For this to work we need to make sure the inode cache radix tree is initialized for all allocation groups, not just those we plan to allocate inodes from. This patch makes sure we initialize the inode cache radix tree for all allocation groups, and also cleans xfs_initialize_perag up a bit to separate the inode32 logical from the general perag structure setup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
9b98b6f3 |
|
26-May-2010 |
Dave Chinner <dchinner@redhat.com> |
xfs: fix might_sleep() warning when initialising per-ag tree The use of radix_tree_preload() only works if the radix tree was initialised without the __GFP_WAIT flag. The per-ag tree uses GFP_NOFS, so does not trigger allocation of new tree nodes from the preloaded array. Hence it enters the allocator with a spinlock held and triggers the might_sleep() warnings. Reported-by; Chris Mason <chris.mason@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
657a4cff |
|
29-Apr-2010 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: replace E2BIG with EFBIG where appropriate Many places in the xfs code return E2BIG when they really mean EFBIG; trying to grow past 16T on a 32 bit machine, for example, says "Argument list too long" rather than "File too large" which is not particularly helpful. Some of these don't make perfect sense as EFBIG either, but still better than E2BIG IMHO. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
1414a604 |
|
20-Apr-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove dead XFS_LOUD_RECOVERY code This can't be enabled through the build system and has been dead for ages. Note that the CRC patches add back log checksumming, but the code is quite different from the version removed here anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
8babd8a2 |
|
03-Mar-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: Increase the default size of the reserved blocks pool The current default size of the reserved blocks pool is easy to deplete with certain workloads, in particular workloads that do lots of concurrent delayed allocation extent conversions. If enough transactions are running in parallel and the entire pool is consumed then subsequent calls to xfs_trans_reserve() will fail with ENOSPC. Also add a rate limited warning so we know if this starts happening again. This is an updated version of an old patch from Lachlan McIlroy. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
dda35b8f |
|
15-Feb-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: merge xfs_lrw.c into xfs_file.c Currently the code to implement the file operations is split over two small files. Merge the content of xfs_lrw.c into xfs_file.c to have it in one place. Note that I haven't done various cleanups that are possible after this yet, they will follow in the next patch. Also the function xfs_dev_is_read_only which was in xfs_lrw.c before really doesn't fit in here at all and was moved to xfs_mount.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
c854363e |
|
05-Feb-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
d5db0f97 |
|
05-Feb-2010 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: more reserved blocks fixups This mangles the reserved blocks counts a little more. 1) add a helper function for the default reserved count 2) add helper functions to save/restore counts on ro/rw 3) save/restore reserved blocks on freeze/thaw 4) disallow changing reserved count while readonly V2: changed field name to match Dave's changes Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
a14a348b |
|
19-Jan-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: cleanup up xfs_log_force calling conventions Remove the XFS_LOG_FORCE argument which was always set, and the XFS_LOG_URGE define, which was never used. Split xfs_log_force into a two helpers - xfs_log_force which forces the whole log, and xfs_log_force_lsn which forces up to the specified LSN. The underlying implementations already were entirely separate, as were the users. Also re-indent the new _xfs_log_force/_xfs_log_force which previously had a weird coding style. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
0cadda1c |
|
19-Jan-2010 |
Christoph Hellwig <hch@infradead.org> |
xfs: remove duplicate buffer flags Currently we define aliases for the buffer flags in various namespaces, which only adds confusion. Remove all but the XBF_ flags to clean this up a bit. Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer uses, but I'll clean that up later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
587aa0fe |
|
19-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: rearrange xfs_mod_sb() to avoid array subscript warning gcc warns of an array subscript out of bounds in xfs_mod_sb(). The code is written in such a way that if the array subscript is out of bounds, then it will assert fail. Rearrange the code to avoid the bounds check warning. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
e57336ff |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: embed the pagb_list array in the perag structure Now that the perag structure is allocated memory rather than held in an array, we don't need to have the busy extent array external to the structure. Embed it into the perag structure to avoid needing an extra allocation when setting up. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
8b26c582 |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: handle ENOMEM correctly during initialisation of perag structures Add proper error handling in case an error occurs while initializing new perag structures for a mount point. The mount structure is restored to its previous state by deleting and freeing any perag structures added during the call. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
0fa800fb |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: Add trace points for per-ag refcount debugging. Uninline xfs_perag_{get,put} so that tracepoints can be inserted into them to speed debugging of reference count problems. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
aed3bb90 |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: Reference count per-ag structures Reference count the per-ag structures to ensure that we keep get/put pairs balanced. Assert that the reference counts are zero at unmount time to catch leaks. In future, reference counts will enable us to safely remove perag structures by allowing us to detect when they are no longer in use. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
1c1c6ebc |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: Replace per-ag array with a radix tree The use of an array for the per-ag structures requires reallocation of the array when growing the filesystem. This requires locking access to the array to avoid use after free situations, and the locking is difficult to get right. To avoid needing to reallocate an array, change the per-ag structures to an allocated object per ag and index them using a tree structure. The AGs are always densely indexed (hence the use of an array), but the number supported is 2^32 and lookups tend to be random and hence indexing needs to scale. A simple choice is a radix tree - it works well with this sort of index. This change also removes another large contiguous allocation from the mount/growfs path in XFS. The growing process now needs to change to only initialise the new AGs required for the extra space, and as such only needs to exclusively lock the tree for inserts. The rest of the code only needs to lock the tree while doing lookups, and hence this will remove all the deadlocks that currently occur on the m_perag_lock as it is now an innermost lock. The lock is also changed to a spinlock from a read/write lock as the hold time is now extremely short. To complete the picture, the per-ag structures will need to be reference counted to ensure that we don't free/modify them while they are still in use. This will be done in subsequent patch. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
44b56e0a |
|
11-Jan-2010 |
Dave Chinner <david@fromorbit.com> |
xfs: convert remaining direct references to m_perag Convert the remaining direct lookups of the per ag structures to use get/put accesses. Ensure that the loops across AGs and prior users of the interface balance gets and puts correctly. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
0b1b213f |
|
14-Dec-2009 |
Christoph Hellwig <hch@infradead.org> |
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
b8f82a4a |
|
14-Nov-2009 |
Christoph Hellwig <hch@infradead.org> |
xfs: kill the STATIC_INLINE macro Remove our own STATIC_INLINE macro. For small function inside implementation files just use STATIC and let gcc inline it, and for those in headers do the normal static inline - they are all small enough to be inlined for debug builds, too. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
6ad112bf |
|
24-Nov-2009 |
Christoph Hellwig <hch@infradead.org> |
xfs: simplify xfs_buf_get / xfs_buf_read interfaces Currently the low-level buffer cache interfaces are highly confusing as we have a _flags variant of each that does actually respect the flags, and one without _flags which has a flags argument that gets ignored and overriden with a default set. Given that very few places use the default arguments get rid of the duplication and convert all callers to pass the flags explicitly. Also remove the now confusing _flags postfix. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
80641dc6 |
|
18-Oct-2009 |
Christoph Hellwig <hch@infradead.org> |
xfs: I/O completion handlers must use NOFS allocations When completing I/O requests we must not allow the memory allocator to recurse into the filesystem, as we might deadlock on waiting for the I/O completion otherwise. The only thing currently allocating normal GFP_KERNEL memory is the allocation of the transaction structure for the unwritten extent conversion. Add a memflags argument to _xfs_trans_alloc to allow controlling the allocator behaviour. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Thomas Neumann <tneumann@users.sourceforge.net> Tested-by: Thomas Neumann <tneumann@users.sourceforge.net> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
|
#
7a9e02d6 |
|
03-Oct-2009 |
Christoph Lameter <cl@linux-foundation.org> |
this_cpu: xfs_icsb_modify_counters does not need "cpu" variable The xfs_icsb_modify_counters() function no longer needs the cpu variable if we use this_cpu_ptr() and we can get rid of get/put_cpu(). Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Olaf Weber <olaf@sgi.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
|
#
d96f8f89 |
|
01-Jul-2009 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: add more statics & drop some unused functions A lot more functions could be made static, but they need forward declarations; this does some easy ones, and also found a few unused functions in the process. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
#
370f0482 |
|
01-Jul-2009 |
Eric Sandeen <sandeen@sandeen.net> |
xfs: add more statics & drop some unused functions A lot more functions could be made static, but they need forward declarations; this does some easy ones, and also found a few unused functions in the process. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
#
abc10647 |
|
08-Jun-2009 |
Dave Chinner <david@fromorbit.com> |
xfs: remove unused parameter from xfs_reclaim_inodes The noblock parameter of xfs_reclaim_inodes is only ever set to zero. Remove it and all the conditional code that is never executed. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
#
7d095257 |
|
08-Jun-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
#
b9ec9068 |
|
17-Apr-2009 |
Olaf Weber <olaf@sgi.com> |
xfs: add more checks to superblock validation There had been reports where xfs filesystem was randomly corrupted with fsfuzzer, and xfs failed to handle it gracefully. This patch fixes couple of reported problem by providing additional checks in the superblock validation routine. Signed-off-by: Olaf Weber <olaf@sgi.com> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
#
2ac00af7 |
|
17-Apr-2009 |
Olaf Weber <olaf@sgi.com> |
xfs: add more checks to superblock validation There had been reports where xfs filesystem was randomly corrupted with fsfuzzer, and xfs failed to handle it gracefully. This patch fixes couple of reported problem by providing additional checks in the superblock validation routine. Signed-off-by: Olaf Weber <olaf@sgi.com> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
#
27174203 |
|
30-Mar-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: cleanup uuid handling The uuid table handling should not be part of a semi-generic uuid library but in the XFS code using it, so move those bits to xfs_mount.c and refactor the whole glob to make it a proper abstraction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
#
1a5902c5 |
|
29-Mar-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: remove m_attroffset With the upcoming v3 inodes the default attroffset needs to be calculated for each specific inode, so we can't cache it in the superblock anymore. Also replace the assert for wrong inode sizes with a proper error check also included in non-debug builds. Note that the ENOSYS return for that might seem odd, but that error is returned by xfs_mount_validate_sb for all theoretically valid but not supported filesystem geometries. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
|
#
9da096fd |
|
29-Mar-2009 |
Malcolm Parsons <malcolm.parsons@gmail.com> |
xfs: fix various typos Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
6447c362 |
|
29-Mar-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: remove m_litino With the upcoming v3 inodes the inode data/attr area size needs to be calculated for each specific inode, so we can't cache it in the superblock anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
#
21b699c8 |
|
16-Mar-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: cleanup log unmount handling Kill the current xfs_log_unmount wrapper and opencode the two function calls in the only caller. Rename the current xfs_log_unmount_dealloc to xfs_log_unmount as it undoes xfs_log_mount and the new name makes that more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
b93b6e43 |
|
04-Feb-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: make sure to free the real-time inodes in the mount error path When mount fails after allocating the real-time inodes we currently leak them. Add a new helper to free the real-time inodes which can be used by both the mount and unmount path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
#
f9057e3d |
|
04-Feb-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: cleanup error handling in xfs_mountfs: Clean up the error handling in xfs_mountfs. Use readable goto label names, simplify the uuid handling and other error conditions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
#
49739140 |
|
18-Jan-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: fix bad_features2 fixups for the root filesystem Currently the bad_features2 fixup and the alignment updates in the superblock are skipped if we mount a filesystem read-only. But for the root filesystem the typical case is to mount read-only first and only later remount writeable so we'll never perform this update at all. It's not a big problem but means the logs of people needing the fixup get spammed at every boot because they never happen on disk. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
7884bc86 |
|
18-Jan-2009 |
Christoph Hellwig <hch@lst.de> |
xfs: fix bad_features2 fixups for the root filesystem Currently the bad_features2 fixup and the alignment updates in the superblock are skipped if we mount a filesystem read-only. But for the root filesystem the typical case is to mount read-only first and only later remount writeable so we'll never perform this update at all. It's not a big problem but means the logs of people needing the fixup get spammed at every boot because they never happen on disk. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
|
#
f95099ba |
|
02-Dec-2008 |
Christoph Hellwig <hch@lst.de> |
kill xfs_unmount_flush There's almost nothing left in this function, instead remove the IRELE on the real times inodes and the call to XFS_QM_UNMOUNT into xfs_unmountfs. For the regular unmount case that means it now also happenes after dmapi notification, but otherwise there is no difference in behaviour. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
#
b56757be |
|
02-Dec-2008 |
Christoph Hellwig <hch@lst.de> |
remove leftovers of shared read-only support We never supported shared read-only filesystems, so remove the dead code left over from IRIX for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
#
81591fe2 |
|
27-Nov-2008 |
Christoph Hellwig <hch@lst.de> |
[XFS] kill xfs_dinode_core_t Now that we have a separate xfs_icdinode_t for the in-core inode which gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core split - the fact that part of the structure gets logged through the inode log item and a small part not can better be described in a comment. All sizeof operations on the dinode_core either really wanted the icdinode and are switched to that one, or had already added the size of the agi unlinked list pointer. Later both will be replaced with helpers once we get the larger CRC-enabled dinode. Removing the data and attribute fork unions also has the advantage that xfs_dinode.h doesn't need to pull in every header under the sun. While we're at it also add some more comments describing the dinode structure. (First sent on October 7th) Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
#
9ccbece5 |
|
29-Oct-2008 |
Lachlan McIlroy <lachlan@sgi.com> |
[XFS] Fix use-after-free with log and quotas Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Peter Leckie <pleckie@sgi.com>
|
#
11654513 |
|
30-Oct-2008 |
David Chinner <david@fromorbit.com> |
[XFS] kill deleted inodes list Now that the deleted inodes list is unused, kill it. This also removes the i_reclaim list head from the xfs_inode, shrinking it by two pointers. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32334a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
#
1dc3318a |
|
30-Oct-2008 |
David Chinner <david@fromorbit.com> |
[XFS] rename inode reclaim functions The function names xfs_finish_reclaim and xfs_finish_reclaim_all are not very descriptive of what they are reclaiming. Rename to xfs_reclaim_inode[s] to match the xfs_sync_inodes() function. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32330a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
#
6c7699c0 |
|
30-Oct-2008 |
David Chinner <david@fromorbit.com> |
[XFS] remove the mount inode list Now we've removed all users of the mount inode list, we can kill it. This reduces the size of the xfs_inode by 2 pointers. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32293a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
#
60197e8d |
|
30-Oct-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] Cleanup maxrecs calculation. Clean up the way the maximum and minimum records for the btree blocks are calculated. For the alloc and inobt btrees all the values are pre-calculated in xfs_mount_common, and we switch the current loop around the ugly generic macros that use cpp token pasting to generate type names to two small helpers in normal C code. For the bmbt and bmdr trees these helpers also exist, but can be called during runtime, too. Here we also kill various macros dealing with them and inline the logic into the get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c. Note that all these new helpers take an xfs_mount * argument which will be needed to determine the size of a btree block once we add support for extended btree blocks with CRCs and other RAS information. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32292a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
75c68f41 |
|
30-Oct-2008 |
David Chinner <david@fromorbit.com> |
[XFS] Remove xfs_iflush_all and clean up xfs_finish_reclaim_all() xfs_iflush_all() walks the m_inodes list to find inodes that need reclaiming. We already have such a list - the m_del_inodes list. Replace xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up xfs_finish_reclaim_all() to handle the different flush modes now needed. Originally based on a patch from Christoph Hellwig. Version 3 o rediff against new linux-2.6/xfs_sync.c code Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not XFS_IFLUSH_ASYNC, to prevent change of behaviour. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32284a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
#
a357a121 |
|
29-Oct-2008 |
Lachlan McIlroy <lachlan@sgi.com> |
[XFS] Fix use-after-free with log and quotas Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Peter Leckie <pleckie@sgi.com>
|
#
d62c251f |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] use KM_MAYFAIL in xfs_mountfs Use KM_MAYFAIL for the m_perag allocation, we can deal with the error easily and blocking forever during mount is not a good idea either. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31837a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
ff4f038c |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] refactor xfs_mount_free xfs_mount_free mostly frees the perag data, which is something that is duplicated in the mount error path. Move the XFS_QM_DONE call to the caller and remove the useless mutex_destroy/spinlock_destroy calls so that we can re-use it for the mount error path. Also rename it to xfs_free_perag to reflect what it does. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31836a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
6203300e |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] don't call xfs_freesb from xfs_unmountfs xfs_readsb is called before xfs_mount so xfs_freesb should be called after xfs_unmountfs, too. This means it now happens after a few things during the of xfs_unmount which all have nothing to do with the superblock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31835a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
41b5c2e7 |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] xfs_unmountfs should return void xfs_unmounts can't and shouldn't return errors so declare it as returning void. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31833a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
4249023a |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] cleanup xfs_mountfs Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
77508ec8 |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] move root inode IRELE into xfs_unmountfs The root inode is allocated in xfs_mountfs so it should be release in xfs_unmountfs. For the unmount case that means we do it after the the xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the dmapi unmount event. Note that both reference the rip variable which might be freed by that time in case inode flushing has kicked in, so strictly speaking this might count as a bug fix SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31830a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
1550d0b0 |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill INDUCE_IO_ERROR All the error injection is already enabled through ifdef DEBUG, so kill the never set second cpp symbol to activate it without the rest of the debugging infrastructure. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31771a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
a738159d |
|
13-Aug-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] don't leak m_fsname/m_rtname/m_logname Add a helper to free the m_fsname/m_rtname/m_logname allocations and use it properly for all mount failure cases. Also switch the allocations for these to kstrdup while we're at it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31728a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
2edbddd5 |
|
26-Jun-2008 |
Lachlan McIlroy <lachlan@sgi.com> |
[XFS] Don't assert if trying to mount with blocksize > pagesize If we don't do the blocksize/PAGESIZE check before calling xfs_sb_validate_fsb_count() we can assert if we try to mount with a blocksize > pagesize. The assert is valid so leave it and just move the blocksize/pagesize check earlier. SGI-PV: 983734 SGI-Modid: xfs-linux-melb:xfs-kern:31365a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
|
#
c962fb79 |
|
19-May-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill xfs_mount_init xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched to kzalloc. Plug a leak of the mount structure for most early mount failures. Move xfs_icsb_init_counters to as late as possible in the mount path and make sure to undo it so that no stale hotplug cpu notifiers are left around on mount failures. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31196a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
19f354d4 |
|
19-May-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] sort out opening and closing of the block devices Currently closing the rt/log block device is done in the wrong spot, and far too early. So revampt it: - xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that it is done after tearing down the buftarg completely. - call to xfs_unmountfs_close moved from xfs_mountfs into caller so that it's done after tearing down the filesystem completely. - xfs_unmountfs_close is renamed to xfs_close_devices and made static in xfs_super.c - opening of the block devices is split into a helper xfs_open_devices that is symetric in use to xfs_close_devices - xfs_unmountfs can now lose struct cred - error handling around device opening sanitized in xfs_fs_fill_super SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31193a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
af15b895 |
|
19-May-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] don't call xfs_freesb from xfs_mountfs failure case Freeing of the superblock is already handled in the caller, and that is more symmetric with the mount path, too. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31192a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
fa6adbe0 |
|
19-May-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill xfs_uuid_unmount Quite useless wrapper that doesn't help making the code more readable. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31184a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
4b166de0 |
|
19-May-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Update valid fields in xfs_mount_log_sb() Recent changes to update the version number during mount (attr2 stuff) failed to change the assert that checked for calid flags being changed on mount. Clearly this path hasn't been exercised by the test code.... SGI-PV: 981950 SGI-Modid: xfs-linux-melb:xfs-kern:31183a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
f0e2d93c |
|
19-May-2008 |
Denys Vlasenko <vda.linux@googlemail.com> |
[XFS] Remove unused arg from kmem_free() kmem_free() function takes (ptr, size) arguments but doesn't actually use second one. This patch removes size argument from all callsites. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31050a Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
7c12f296 |
|
30-Apr-2008 |
Tim Shimmin <tes@sgi.com> |
[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields. Previously, mounting with noattr2 failed to achieve anything because although it cleared the attr2 mount flag, it would set it again as soon as it processed the superblock fields. The fix now has an explicit noattr2 flag and uses it later to fix up the versionnum and features2 fields. SGI-PV: 980021 SGI-Modid: xfs-linux-melb:xfs-kern:31003a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
ce46193b |
|
22-Apr-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill XFS_ICSB_SB_LOCKED With the last two patches XFS_ICSB_SB_LOCKED is never checked and only superflously passed to xfs_icsb_count, so kill it. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30920a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
45af6c6d |
|
22-Apr-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] split xfs_icsb_balance_counter Add an xfs_icsb_balance_counter_locked for the case where mp->m_sb_lock is already locked. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30918a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
d4d90b57 |
|
22-Apr-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] Add xfs_icsb_sync_counters_locked for when m_sb_lock already held Add a new xfs_icsb_sync_counters_locked for the case where m_sb_lock is already taken and add a flags argument to xfs_icsb_sync_counters so that xfs_icsb_sync_counters_flags is not needed. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30917a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
d64e31a2 |
|
09-Apr-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Ensure errors from xfs_bdstrat() are correctly checked. xfsbdstrat() is declared to return an error. That is never checked because the error is propagated by the xfs_buf_t that is passed through the function. Mark xfsbdstrat() as returning void and comment the prototype on the methods needed for error checking. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30823a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
e5720eec |
|
09-Apr-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Propagate errors from xfs_trans_commit(). xfs_trans_commit() can return errors when there are problems in the transaction subsystem. They are indicative that the entire transaction may be incomplete, and hence the error should be propagated as there is a good possibility that there is something fatally wrong in the filesystem. Catch and propagate or warn about commit errors in the places where they are currently ignored. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30795a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
714082bc |
|
09-Apr-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Report errors from xfs_reserve_blocks(). xfs_reserve_blocks() can fail in interesting ways. In neither case is it a fatal error, but the result can lead to sub-optimal behaviour. Warn to the syslog if the call fails but otherwise continue. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30784a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
36fbe6e6 |
|
09-Apr-2008 |
David Chinner <dgc@sgi.com> |
[XFS] xfs_icsb_counter_disabled() never returns an error. Mark it void. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30782a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
43355099 |
|
27-Mar-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] remove most calls to VN_RELE Most VN_RELE calls either directly contain a XFS_ITOV or have the corresponding xfs_inode already in scope. Use the IRELE helper instead of VN_RELE to clarify the code. With a little more work we can kill VN_RELE altogether and define IRELE in terms of iput directly. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30710a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
a45c7968 |
|
05-Mar-2008 |
Christoph Hellwig <hch@infradead.org> |
[XFS] Remove superflous xfs_readsb call in xfs_mountfs. When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines above unconditionally, so there is no need to try to read the superblock if it's not present. If any other port doesn't have the superblock read at this point it should just call it directly from it's xfs_mount equivalent. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30603a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
e6957ea4 |
|
09-Apr-2008 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Ensure "both" features2 slots are consistent Since older kernels may look in the sb_bad_features2 slot for flags, rather than zeroing it out on fixup, we should make it equal to the sb_features2 value. Also, if the ATTR2 flag was not found prior to features2 fixup, it was not set in the mount flags, so re-check after the fixup so that the current session will use the feature. Also fix up the comments to reflect these changes. SGI-PV: 980085 SGI-Modid: xfs-linux-melb:xfs-kern:30778a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
ee1c0908 |
|
05-Mar-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
62118709 |
|
05-Mar-2008 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] remove shouting-indirection macros from xfs_sb.h Remove macro-to-small-function indirection from xfs_sb.h, and remove some which are completely unused. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30528a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
249a8c11 |
|
04-Feb-2008 |
David Chinner <dgc@sgi.com> |
[XFS] Move AIL pushing into it's own thread When many hundreds to thousands of threads all try to do simultaneous transactions and the log is in a tail-pushing situation (i.e. full), we can get multiple threads walking the AIL list and contending on the AIL lock. The AIL push is, in effect, a simple I/O dispatch algorithm complicated by the ordering constraints placed on it by the transaction subsystem. It really does not need multiple threads to push on it - even when only a single CPU is pushing the AIL, it can push the I/O out far faster that pretty much any disk subsystem can handle. So, to avoid contention problems stemming from multiple list walkers, move the list walk off into another thread and simply provide a "target" to push to. When a thread requires a push, it sets the target and wakes the push thread, then goes to sleep waiting for the required amount of space to become available in the log. This mechanism should also be a lot fairer under heavy load as the waiters will queue in arrival order, rather than queuing in "who completed a push first" order. Also, by moving the pushing to a separate thread we can do more effectively overload detection and prevention as we can keep context from loop iteration to loop iteration. That is, we can push only part of the list each loop and not have to loop back to the start of the list every time we run. This should also help by reducing the number of items we try to lock and/or push items that we cannot move. Note that this patch is not intended to solve the inefficiencies in the AIL structure and the associated issues with extremely large list contents. That needs to be addresses separately; parallel access would cause problems to any new structure as well, so I'm only aiming to isolate the structure from unbounded parallelism here. SGI-PV: 972759 SGI-Modid: xfs-linux-melb:xfs-kern:30371a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
a8272ce0 |
|
22-Nov-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Fix up sparse warnings. These are mostly locking annotations, marking things static, casts where needed and declaring stuff in header files. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30002a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
#
0771fb45 |
|
11-Oct-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Refactor xfs_mountfs Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
007c61c6 |
|
11-Oct-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Remove spin.h remove spinlock init abstraction macro in spin.h, remove the callers, and remove the file. Move no-op spinlock_destroy to xfs_linux.h Cleanup spinlock locals in xfs_mount.c SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29751a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
3685c2a1 |
|
11-Oct-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Unwrap XFS_SB_LOCK. Un-obfuscate XFS_SB_LOCK, remove XFS_SB_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29746a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
287f3dad |
|
11-Oct-2007 |
Donald Douwsma <donaldd@sgi.com> |
[XFS] Unwrap AIL_LOCK SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29739a Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
541d7d3c |
|
11-Oct-2007 |
Lachlan McIlroy <lachlan@sgi.com> |
[XFS] kill unnessecary ioops indirection Currently there is an indirection called ioops in the XFS data I/O path. Various functions are called by functions pointers, but there is no coherence in what this is for, and of course for XFS itself it's entirely unused. This patch removes it instead and significantly reduces source and binary size of XFS while making maintaince easier. SGI-PV: 970841 SGI-Modid: xfs-linux-melb:xfs-kern:29737a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
cc92e7ac |
|
30-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] growlock should be a mutex m_growlock only needs plain binary mutex semantics, so use a struct mutex instead of a semaphore for it. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29512a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
b267ce99 |
|
30-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill struct bhv_vfs Now that struct bhv_vfs doesn't have any members left we can kill it and go directly from the super_block to the xfs_mount everywhere. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29509a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
bd186aa9 |
|
30-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill the vfs_flags member in struct bhv_vfs All flags are added to xfs_mount's m_flag instead. Note that the 32bit inode flag was duplicated in both of them, but only cleared in the mount when it was not nessecary due to the filesystem beeing small enough. Two flags are still required here - one to indicate the mount option setting, and one to indicate if it applies or not. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29507a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
0ce4cfd4 |
|
30-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] kill the vfs_fsid and vfs_altfsid members in struct bhv_vfs vfs_altfsid was just a pointer to mp->m_fixedfsid so we can trivially replace it with the latter. vfs_fsid also was identical to m_fixedfsid through rather obfuscated ways so we can kill it as well and simply its only user. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29506a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
745f6919 |
|
30-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] call common xfs vfs-level helpers directly and remove vfs operations Also remove the now dead behavior code. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29505a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
f541d270 |
|
28-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] move freeing the mount structure from xfs_mount_free into the callers In the next patch we need to look at the mount structure until just before it's freed, so we need to be able to free it as the very last thing in xfs_unmount. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29501a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
da353b0d |
|
27-Aug-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Radix tree based inode caching One of the perpetual scaling problems XFS has is indexing it's incore inodes. We currently uses hashes and the default hash sizes chosen can only ever be a tradeoff between memory consumption and the maximum realistic size of the cache. As a result, anyone who has millions of inodes cached on a filesystem needs to tunes the size of the cache via the ihashsize mount option to allow decent scalability with inode cache operations. A further problem is the separate inode cluster hash, whose size is based on the ihashsize but is smaller, and so under certain conditions (sparse cluster cache population) this can become a limitation long before the inode hash is causing issues. The following patchset removes the inode hash and cluster hash and replaces them with radix trees to avoid the scalability limitations of the hashes. It also reduces the size of the inodes by 3 pointers.... SGI-PV: 969561 SGI-Modid: xfs-linux-melb:xfs-kern:29481a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
2bdf7cd0 |
|
27-Aug-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] superblock endianess annotations Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the incore -> disk conversion. A new helper xfs_sb_from_disk handles the other direction and doesn't need the slightly hacky table-driven approach because we only ever read the full sb from disk. The handling of shared r/o filesystems has been buggy on little endian system and fixing this required shuffling around of some code in that area. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29477a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
49ee6c91 |
|
16-Aug-2007 |
Jesper Juhl <jesper.juhl@gmail.com> |
[XFS] Fix a potential NULL pointer deref in XFS on failed mount. If we fail to open the the log device buftarg, we can fall through to error handling code that fails to check for a NULL log device buftarg before calling xfs_free_buftarg(). This patch fixes the issue by checking mp->m_logdev_targp against NULL in xfs_unmountfs_close() and doing the proper xfs_blkdev_put(logdev); and xfs_blkdev_put(rtdev); on (!mp->m_rtdev_targp) in xfs_mount(). Discovered by the Coverity checker. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29328a Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
425f9ddd |
|
16-Aug-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Pick a single default inode cluster size. Remove scaling of inode "clusters" based on machine memory; small cluster cut-point was an unrealistic 32MB and was probably never tested. Removes another user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29324a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
40906630 |
|
16-Aug-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] Remove m_nreadaheads m_nreadaheads in the mount struct is never used; remove it and the various macros assigned to it. Also remove a couple other unused macros in the same areas. Removes one user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29322a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
39726be2 |
|
18-Jun-2007 |
Christoph Hellwig <hch@infradead.org> |
[XFS] Use do_div() on 64 bit types. SGI-PV: 966145 SGI-Modid: xfs-linux-melb:xfs-kern:28889a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
84e1e99f |
|
18-Jun-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Prevent ENOSPC from aborting transactions that need to succeed During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
641c56fb |
|
18-Jun-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Prevent deadlock when flushing inodes on unmount When we are unmounting the filesystem, we flush all the inodes to disk. Unfortunately, if we have an inode cluster that has just been freed and marked stale sitting in an incore log buffer (i.e. hasn't been flushed to disk), it will be holding all the flush locks on the inodes in that cluster. xfs_iflush_all() which is called during unmount walks all the inodes trying to reclaim them, and it doing so calls xfs_finish_reclaim() on each inode. If the inode is dirty, if grabs the flush lock and flushes it. Unfortunately, find dirty inodes that already have their flush lock held and so we sleep. At this point in the unmount process, we are running single-threaded. There is nothing more that can push on the log to force the transaction holding the inode flush locks to disk and hence we deadlock. The fix is to issue a log force before flushing the inodes on unmount so that all the flush locks will be released before we start flushing the inodes. SGI-PV: 964538 SGI-Modid: xfs-linux-melb:xfs-kern:28862a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
92821e2b |
|
23-May-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
4cc929ee |
|
14-May-2007 |
Nathan Scott <nscott@aconex.com> |
[XFS] Don't grow filesystems past the size they can index. When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
8bb78442 |
|
09-May-2007 |
Rafael J. Wysocki <rjw@rjwysocki.net> |
Add suspend-related notifications for CPU hotplug Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
1c72bf90 |
|
07-May-2007 |
Eric Sandeen <sandeen@sandeen.net> |
[XFS] The last argument "lsn" of xfs_trans_commit() is always called with NULL. Patch provided by Eric Sandeen. SGI-PV: 961693 SGI-Modid: xfs-linux-melb:xfs-kern:28199a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
5478eead |
|
10-Feb-2007 |
Lachlan McIlroy <lachlan@sgi.com> |
[XFS] Re-initialize the per-cpu superblock counters after recovery. After filesystem recovery the superblock is re-read to bring in any changes. If the per-cpu superblock counters are not re-initialized from the superblock then the next time the per-cpu counters are disabled they might overwrite the global counter with a bogus value. SGI-PV: 957348 SGI-Modid: xfs-linux-melb:xfs-kern:27999a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
dbcabad1 |
|
10-Feb-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Fix block reservation mechanism. The block reservation mechanism has been broken since the per-cpu superblock counters were introduced. Make the block reservation code work with the per-cpu counters by syncing the counters, snapshotting the amount of available space and then doing a modifcation of the counter state according to the result. Continue in a loop until we either have no space available or we reserve some space. SGI-PV: 956323 SGI-Modid: xfs-linux-melb:xfs-kern:27895a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
20f4ebf2 |
|
10-Feb-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Make growfs work for amounts greater than 2TB The free block modification code has a 32bit interface, limiting the size the filesystem can be grown even on 64 bit machines. On 32 bit machines, there are other 32bit variables in transaction structures and interfaces that need to be expanded to allow this to work. SGI-PV: 959978 SGI-Modid: xfs-linux-melb:xfs-kern:27894a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
03135cf7 |
|
10-Feb-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Fix UP build breakage due to undefined m_icsb_mutex. SGI-PV: 952227 SGI-Modid: xfs-linux-melb:xfs-kern:27692a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
20b64285 |
|
10-Feb-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Reduction global superblock lock contention near ENOSPC. The existing per-cpu superblock counter code uses the global superblock spin lock when we approach ENOSPC for global synchronisation. On larger machines than this code was originally tested on this can still get catastrophic spinlock contention due increasing rebalance frequency near ENOSPC. By introducing a sleeping lock that is used to serialise balances and modifications near ENOSPC we prevent contention from needlessly from wasting the CPU time of potentially hundreds of CPUs. To reduce the number of balances occuring, we separate the need rebalance case from the slow allocate case. Now, a counter running dry will trigger a rebalance during which counters are disabled. Any thread that sees a disabled counter enters a different path where it waits on the new mutex. When it gets the new mutex, it checks if the counter is disabled. If the counter is disabled, then we _know_ that we have to use the global counter and lock and it is safe to do so immediately. Otherwise, we drop the mutex and go back to trying the per-cpu counters which we know were re-enabled. SGI-PV: 952227 SGI-Modid: xfs-linux-melb:xfs-kern:27612a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
7989cb8e |
|
10-Feb-2007 |
David Chinner <dgc@sgi.com> |
[XFS] Keep stack usage down for 4k stacks by using noinline. gcc-4.1 and more recent aggressively inline static functions which increases XFS stack usage by ~15% in critical paths. Prevent this from occurring by adding noinline to the STATIC definition. Also uninline some functions that are too large to be inlined and were causing problems with CONFIG_FORCED_INLINING=y. Finally, clean up all the different users of inline, __inline and __inline__ and put them under one STATIC_INLINE macro. For debug kernels the STATIC_INLINE macro uninlines those functions. SGI-PV: 957159 SGI-Modid: xfs-linux-melb:xfs-kern:27585a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: David Chatterton <chatz@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
|
#
4be536de |
|
06-Sep-2006 |
David Chinner <dgc@sgi.com> |
[XFS] Prevent free space oversubscription and xfssyncd looping. The fix for recent ENOSPC deadlocks introduced certain limitations on allocations. The fix could cause xfssyncd to loop endlessly if we did not leave some space free for the allocator to work correctly. Basically, we needed to ensure that we had at least 4 blocks free for an AG free list and a block for the inode bmap btree at all times. However, this did not take into account the fact that each AG has a free list that needs 4 blocks. Hence any filesystem with more than one AG could cause oversubscription of free space and make xfssyncd spin forever trying to allocate space needed for AG freelists that was not available in the AG. The following patch reserves space for the free lists in all AGs plus the inode bmap btree which prevents oversubscription. It also prevents those blocks from being reported as free space (as they can never be used) and makes the SMP in-core superblock accounting code and the reserved block ioctl respect this requirement. SGI-PV: 955674 SGI-Modid: xfs-linux-melb:xfs-kern:26894a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: David Chatterton <chatz@sgi.com>
|
#
5a67e4c5 |
|
27-Jun-2006 |
Chandra Seetharaman <sekharan@us.ibm.com> |
[PATCH] cpu hotplug: use hotplug version of cpu notifier in appropriate places Make use the of newly defined hotplug version of cpu_notifier functionality wherever appropriate. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
6fdf8ccc |
|
27-Jun-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Rework code snippets slightly to remove remaining recent-gcc warnings. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:26364a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
f6c2d1fa |
|
19-Jun-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Remove version 1 directory code. Never functioned on Linux, just pure bloat. SGI-PV: 952969 SGI-Modid: xfs-linux-melb:xfs-kern:26251a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
67fcaa73 |
|
09-Jun-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters. SGI-PV: 953338 SGI-Modid: xfs-linux-melb:xfs-kern:26107a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
b83bd138 |
|
09-Jun-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Resolve a namespace collision on vfs/vfsops for FreeBSD porters. SGI-PV: 9533338 SGI-Modid: xfs-linux-melb:xfs-kern:26106a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
b6574520 |
|
08-Jun-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Portability changes: remove prdev, stick to one diagnostic interface. SGI-PV: 953338 SGI-Modid: xfs-linux-melb:xfs-kern:26103a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
d210a28c |
|
08-Jun-2006 |
Yingping Lu <yingping@sgi.com> |
[XFS] In actual allocation of file system blocks and freeing extents, the transaction within each such operation may involve multiple locking of AGF buffer. While the freeing extent function has sorted the extents based on AGF number before entering into transaction, however, when the file system space is very limited, the allocation of space would try every AGF to get space allocated, this could potentially cause out-of-order locking, thus deadlock could happen. This fix mitigates the scarce space for allocation by setting aside a few blocks without reservation, and avoid deadlock by maintaining ascending order of AGF locking. SGI-PV: 947395 SGI-Modid: xfs-linux-melb:xfs-kern:210801a Signed-off-by: Yingping Lu <yingping@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
e50bd16f |
|
10-Apr-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Fix superblock validation regression for the zero imaxpct case. Thanks to kjamieson for noticing. SGI-PV: 951661 SGI-Modid: xfs-linux-melb:xfs-kern:25675a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
764d1f89 |
|
30-Mar-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Implement the silent parameter to fill_super, previously ignored. SGI-PV: 951299 SGI-Modid: xfs-linux-melb:xfs-kern:25632a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
c41564b5 |
|
28-Mar-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all these typos. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:25539a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
9f989c94 |
|
13-Mar-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Additional mount time superblock validation checks. SGI-PV: 950491 SGI-Modid: xfs-linux-melb:xfs-kern:25354a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
01e1b69c |
|
13-Mar-2006 |
David Chinner <dgc@sgi.com> |
[XFS] using a spinlock per cpu for superblock counter exclusion results in a preēmpt counter overflow at 256p and above. Change the exclusion mechanism to use atomic bit operations and busy wait loops to emulate the spin lock exclusion mechanism but without the preempt count issues. SGI-PV: 950027 SGI-Modid: xfs-linux-melb:xfs-kern:25338a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
e8234a68 |
|
13-Mar-2006 |
David Chinner <dgc@sgi.com> |
[XFS] Add support for hotplug CPUs to the per-CPU superblock counters by registering a notifier callback that listens to CPU up/down events to modify the counters appropriately. SGI-PV: 949726 SGI-Modid: xfs-linux-melb:xfs-kern:25214a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
8d280b98 |
|
13-Mar-2006 |
David Chinner <dgc@sgi.com> |
[XFS] On machines with more than 8 cpus, when running parallel I/O threads, the incore superblock lock becomes the limiting factor for buffered write throughput. Make the contended fields in the incore superblock use per-cpu counters so that there is no global lock to limit scalability. SGI-PV: 946630 SGI-Modid: xfs-linux-melb:xfs-kern:25106a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
014c2544 |
|
14-Jan-2006 |
Jesper Juhl <juhl-lkml@dif.dk> |
return statement cleanup - kill pointless parentheses This patch removes pointless parentheses from return statements. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
ee2a4f7c |
|
10-Jan-2006 |
Nathan Scott <nathans@sgi.com> |
[XFS] Fix an intermittent pquota panic caused by dodgey quota flags to an umount dquot flush call. SGI-PV: 946444 SGI-Modid: xfs-linux-melb:xfs-kern:24680a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
1df84c93 |
|
10-Jan-2006 |
Christoph Hellwig <hch@sgi.com> |
[XFS] Mark some lookup tables const. Thanks to Arjan van de Ven for spotting these. SGI-PV: 946028 SGI-Modid: xfs-linux-melb:xfs-kern:202617a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
794ee1ba |
|
09-Jan-2006 |
Jes Sorensen <jes@trained-monkey.org> |
[PATCH] mutex subsystem, semaphore to mutex: XFS This patch switches XFS over to use the new mutex code directly as opposed to the previous workaround patch I posted earlier that avoided the namespace clash by forcing it back to semaphores. This falls in the 'works for me<tm>' category. Signed-off-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
a749ee86 |
|
01-Nov-2005 |
Eric Sandeen <sandeen@sgi.com> |
[XFS] Fix calculation of reserved AGs for inodes in 32-bit inode mode Spotted by Roger Willcocks <willcor @at@ gmail.com> SGI-PV: 944858 SGI-Modid: xfs-linux:xfs-kern:201213a Signed-off-by: Eric Sandeen <sandeen@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
c11e2c36 |
|
01-Nov-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Rework fid encode/decode wrt 64 bit inums interacting with NFS. SGI-PV: 937127 SGI-Modid: xfs-linux:xfs-kern:24201a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
7b718769 |
|
01-Nov-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
a844f451 |
|
01-Nov-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot. SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
fc1f8c1c |
|
01-Nov-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Track external log/realtime device names for correct reporting in /proc/mounts. SGI-PV: 942984 SGI-Modid: xfs-linux:xfs-kern:23862a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
d8cc890d |
|
01-Nov-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Ondisk format extension for extended attributes (attr2). Basically, the data/attr forks now grow up/down from either end of the literal area, rather than dividing the literal area into two chunks and growing both upward. Means we can now make much more efficient use of the attribute space, incl. fitting DMF attributes inline in 256 byte inodes, and large jumps in dbench3 performance numbers. It is self enabling, but can be forced on/off via the attr2/noattr2 mount options. SGI-PV: 941645 SGI-Modid: xfs-linux:xfs-kern:23835a Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
da1650a5 |
|
01-Nov-2005 |
Christoph Hellwig <hch@sgi.com> |
[XFS] Add format checking to cmn_err and icmn_err SGI-PV: 942243 SGI-Modid: xfs-linux:xfs-kern:198658a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
8401e963 |
|
20-Jun-2005 |
Christoph Hellwig <hch@sgi.com> |
[XFS] remove xfs_incore_relse SGI-PV: 936977 SGI-Modid: xfs-linux:xfs-kern:193409a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
efa80278 |
|
20-Jun-2005 |
Christoph Hellwig <hch@sgi.com> |
[XFS] rewrite xfs_iflush_all SGI-PV: 936890 SGI-Modid: xfs-linux:xfs-kern:193349a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
ba0f32d4 |
|
20-Jun-2005 |
Christoph Hellwig <hch@sgi.com> |
[XFS] mark various symbols static Patch from Adrian Bunk SGI-PV: 936255 SGI-Modid: xfs-linux:xfs-kern:192760a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
|
#
de20614b |
|
05-May-2005 |
Nathan Scott <nathans@sgi.com> |
[XFS] Block mount attempts for filesystems with version 1 directories. SGI Modid: xfs-linux:xfs-kern:21937a Signed-off-by: Nathan Scott <nathans@sgi.com> Signed-off-by: Christoph Hellwig <hch@sgi.com>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|