xfs: report dir/attr block corruption errors to the health system

Whenever we encounter corrupt directory or extended attribute blocks, we
should report that to the health monitoring system for later reporting.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: convert bp->b_bn references to xfs_buf_daddr()

Stop directly referencing b_bn in code outside the buffer cache, as
b_bn is supposed to be used only as an internal cache index.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: convert xfs_sb_version_has checks to use mount features

This is a conversion of the remaining xfs_sb_version_has..(sbp)
checks to use xfs_has_..(mp) feature checks.

This was largely done with a vim replacement macro that did:

:0,$s/xfs_sb_version_has\(.*\)&\(.*\)->m_sb/xfs_has_\1\2/g<CR>

A couple of other variants were also used, and the rest touched up
by hand.

$ size -t fs/xfs/built-in.a
text data bss dec hex filename
before 1127533 311352 484 1439369 15f689 (TOTALS)
after 1125360 311352 484 1437196 15ee0c (TOTALS)

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: replace xfs_sb_version checks with feature flag checks

Convert the xfs_sb_version_hasfoo() to checks against
mp->m_features. Checks of the superblock itself during disk
operations (e.g. in the read/write verifiers and the to/from disk
formatters) are not converted - they operate purely on the
superblock state. Everything else should use the mount features.

Large parts of this conversion were done with sed with commands like
this:

for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do
sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f
done

With manual cleanups for things like "xfs_has_extflgbit" and other
little inconsistencies in naming.

The result is ia lot less typing to check features and an XFS binary
size reduced by a bit over 3kB:

$ size -t fs/xfs/built-in.a
text data bss dec hex filenam
before 1130866 311352 484 1442702 16038e (TOTALS)
after 1127727 311352 484 1439563 15f74b (TOTALS)

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: move the di_size field to struct xfs_inode

In preparation of removing the historic icinode struct, move the on-disk
size field into the containing xfs_inode structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: reduce debug overhead of dir leaf/node checks

On debug kernels, we call xfs_dir3_leaf_check_int() multiple times
on every directory modification. The robust hash ordering checks it
does on every entry in the leaf on every call results in a massive
CPU overhead which slows down debug kernels by a large amount.

We use xfs_dir3_leaf_check_int() for the verifiers as well, so we
can't just gut the function to reduce overhead. What we can do,
however, is reduce the work it does when it is called from the
debug interfaces, just leaving the high level checks in place and
leaving the robust validation to the verifiers. This means the debug
checks will catch gross errors, but subtle bugs might not be caught
until a verifier is run.

It is easy enough to restore the existing debug behaviour if the
developer needs it (just change a call parameter in the debug code),
but overwise the overhead makes testing large directory block sizes
on debug kernels very slow.

Profile at an unlink rate of ~80k file/s on a 64k block size
filesystem before the patch:

40.30% [kernel] [k] xfs_dir3_leaf_check_int
10.98% [kernel] [k] __xfs_dir3_data_check
8.10% [kernel] [k] xfs_verify_dir_ino
4.42% [kernel] [k] memcpy
2.22% [kernel] [k] xfs_dir2_data_get_ftype
1.52% [kernel] [k] do_raw_spin_lock

Profile after, at an unlink rate of ~125k files/s (+50% improvement)
has largely dropped the leaf verification debug overhead out of the
profile.

16.53% [kernel] [k] __xfs_dir3_data_check
12.53% [kernel] [k] xfs_verify_dir_ino
7.97% [kernel] [k] memcpy
3.36% [kernel] [k] xfs_dir2_data_get_ftype
2.86% [kernel] [k] __pv_queued_spin_lock_slowpath

Create shows a similar change in profile and a +25% improvement in
performance.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: Refactor xfs_da_state_alloc() helper

Every call to xfs_da_state_alloc() also requires setting up state->args
and state->mp

Change xfs_da_state_alloc() to receive an xfs_da_args_t as argument and
return a xfs_da_state_t with both args and mp already set.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reduce struct typedef usage]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: check owner of dir3 free blocks

Check the owner field of dir3 free block headers and reject the metadata
if there's something wrong with it.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: don't ever return a stale pointer from __xfs_dir3_free_read

If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.

Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.

Fixes: de14c5f541e7 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: fix buffer corruption reporting when xfs_dir3_free_header_check fails

xfs_verifier_error is supposed to be called on a corrupt metadata buffer
from within a buffer verifier function, whereas xfs_buf_mark_corrupt
is the function to be called when a piece of code has read a buffer and
catches something that a read verifier cannot. The first function sets
b_error anticipating that the low level buffer handling code will see
the nonzero b_error and clear XBF_DONE on the buffer, whereas the second
function does not.

Since xfs_dir3_free_header_check examines fields in the dir free block
header that require more context than can be provided to read verifiers,
we must call xfs_buf_mark_corrupt when it finds a problem.

Switching the calls has a secondary effect that we no longer corrupt the
buffer state by setting b_error and leaving XBF_DONE set. When /that/
happens, we'll trip over various state assertions (most commonly the
b_error check in xfs_buf_reverify) on a subsequent attempt to read the
buffer.

Fixes: bc1a09b8e334bf5f ("xfs: refactor verifier callers to print address of failing check")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: add a function to deal with corrupt buffers post-verifiers

Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run. This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking. Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: remove the mappedbno argument to xfs_da_get_buf

Use the xfs_da_get_buf_daddr function directly for the two callers
that pass a mapped disk address, and then remove the mappedbno argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: remove the mappedbno argument to xfs_da_read_buf

Move the code for reading an already mapped block into
xfs_da3_node_read_mapped, which is the only caller ever passing a block
number in the mappedbno argument and replace the mappedbno argument with
the simple xfs_dabuf_get flags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: remove the mappedbno argument to xfs_dir3_leafn_read

This argument is always hard coded to -1, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->m_dirnameops

Instead of causing a relatively expensive indirect call for each
hashing and comparism of a file name in a directory just use an
inline function and a simple branch on the ASCII CI bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix unused variable warning]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: convert open coded corruption check to use XFS_IS_CORRUPT

Convert the last of the open coded corruption check and report idioms to
use the XFS_IS_CORRUPT macro.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: merge xfs_dir2_data_freescan and xfs_dir2_data_freescan_int

There is no real need for xfs_dir2_data_freescan wrapper, so rename
xfs_dir2_data_freescan_int to xfs_dir2_data_freescan and let the
callers dereference the mount pointer from the inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->data_get_ftype and ->data_put_ftype

Replace the ->data_get_ftype and ->data_put_ftype dir ops methods with
directly called xfs_dir2_data_get_ftype and xfs_dir2_data_put_ftype
helpers that takes care of the differences between the directory format
with and without the file type field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->data_bestfree_p

Replace the ->data_bestfree_p dir ops method with a directly called
xfs_dir2_data_bestfree_p helper that takes care of the differences
between the v4 and v5 on-disk format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move the dir2 data block fixed offsets to struct xfs_da_geometry

Move the data block fixed offsets towards our structure for dir/attr
geometry parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->data_entry_tag_p

Replace the ->data_entry_tag_p dir ops method with a directly called
xfs_dir2_data_entry_tag_p helper that takes care of the differences
between the directory format with and without the file type field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->data_entsize

Replace the ->data_entsize dir ops method with a directly called
xfs_dir2_data_entsize helper that takes care of the differences between
the directory format with and without the file type field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->db_to_fdb and ->db_to_fdindex

Now that the max bests value is in struct xfs_da_geometry both instances
of ->db_to_fdb and ->db_to_fdindex are identical. Replace them with
local xfs_dir2_db_to_fdb and xfs_dir2_db_to_fdindex functions in
xfs_dir2_node.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move the max dir2 free bests count to struct xfs_da_geometry

Move the max free bests count towards our structure for dir/attr
geometry parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move the dir2 free header size to struct xfs_da_geometry

Move the free header size towards our structure for dir/attr geometry
parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: add a bests pointer to struct xfs_dir3_icfree_hdr

All but two callers of the ->free_bests_p dir operation already have a
struct xfs_dir3_icfree_hdr from a previous call to
xfs_dir2_free_hdr_from_disk at hand. Add a pointer to the bests to
struct xfs_dir3_icfree_hdr to clean up this pattern. To optimize this
pattern, pass the struct xfs_dir3_icfree_hdr to xfs_dir2_free_log_bests
instead of recalculating the pointer there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: make the xfs_dir3_icfree_hdr available to xfs_dir2_node_addname_int

Return the xfs_dir3_icfree_hdr used by the helpers called from
xfs_dir2_node_addname_int to the main function to prepare for the
next round of changes where we'll use the ichdr in xfs_dir3_icfree_hdr
to avoid extra operations to find the bests pointers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->free_hdr_to_disk

Replace the ->free_hdr_to_disk dir ops method with a directly called
xfs_dir2_free_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->free_hdr_from_disk

Replace the ->free_hdr_from_disk dir ops method with a directly called
xfs_dir_free_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move the max dir2 leaf entries count to struct xfs_da_geometry

Move the max leaf entries count towards our structure for dir/attr
geometry parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move the dir2 leaf header size to struct xfs_da_geometry

Move the leaf header size towards our structure for dir/attr geometry
parameters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: add an entries pointer to struct xfs_dir3_icleaf_hdr

All callers of the ->node_tree_p dir operation already have a struct
xfs_dir3_icleaf_hdr from a previous call to xfs_da_leaf_hdr_from_disk at
hand, or just need slight changes to the calling conventions to do so.
Add a pointer to the entries to struct xfs_dir3_icleaf_hdr to clean up
this pattern. To make this possible the xfs_dir3_leaf_log_ents function
grow a new argument to pass the xfs_dir3_icleaf_hdr that call callers
already have, and xfs_dir2_leaf_lookup_int returns the
xfs_dir3_icleaf_hdr to the callers so that they can later use it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->leaf_hdr_to_disk

Replace the ->leaf_hdr_to_disk dir ops method with a directly called
xfs_dir_leaf_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: devirtualize ->leaf_hdr_from_disk

Replace the ->leaf_hdr_from_disk dir ops method with a directly called
xfs_dir2_leaf_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: always log corruption errors

Make sure we log something to dmesg whenever we return -EFSCORRUPTED up
the call stack.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: reverse search directory freespace indexes

When a directory is growing rapidly, new blocks tend to get added at
the end of the directory. These end up at the end of the freespace
index, and when the directory gets large finding these new
freespaces gets expensive. The code does a linear search across the
frespace index from the first block in the directory to the last,
hence meaning the newly added space is the last index searched.

Instead, do a reverse order index search, starting from the last
block and index in the freespace index. This makes most lookups for
free space on rapidly growing directories O(1) instead of O(N), but
should not have any impact on random insert workloads because the
average search length is the same regardless of which end of the
array we start at.

The result is a major improvement in large directory grow rates:

create time(sec) / rate (files/s)
File count vanilla Prev commit Patched
10k 0.41 / 24.3k 0.42 / 23.8k 0.41 / 24.3k
20k 0.74 / 27.0k 0.76 / 26.3k 0.75 / 26.7k
100k 3.81 / 26.4k 3.47 / 28.8k 3.27 / 30.6k
200k 8.58 / 23.3k 7.19 / 27.8k 6.71 / 29.8k
1M 85.69 / 11.7k 48.53 / 20.6k 37.67 / 26.5k
2M 280.31 / 7.1k 130.14 / 15.3k 79.55 / 25.2k
10M 3913.26 / 2.5k 552.89 / 18.1k

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: speed up directory bestfree block scanning

When running a "create millions inodes in a directory" test
recently, I noticed we were spending a huge amount of time
converting freespace block headers from disk format to in-memory
format:

31.47% [kernel] [k] xfs_dir2_node_addname
17.86% [kernel] [k] xfs_dir3_free_hdr_from_disk
3.55% [kernel] [k] xfs_dir3_free_bests_p

We shouldn't be hitting the best free block scanning code so hard
when doing sequential directory creates, and it turns out there's
a highly suboptimal loop searching the the best free array in
the freespace block - it decodes the block header before checking
each entry inside a loop, instead of decoding the header once before
running the entry search loop.

This makes a massive difference to create rates. Profile now looks
like this:

13.15% [kernel] [k] xfs_dir2_node_addname
3.52% [kernel] [k] xfs_dir3_leaf_check_int
3.11% [kernel] [k] xfs_log_commit_cil

And the wall time/average file create rate differences are
just as stark:

create time(sec) / rate (files/s)
File count vanilla patched
10k 0.41 / 24.3k 0.42 / 23.8k
20k 0.74 / 27.0k 0.76 / 26.3k
100k 3.81 / 26.4k 3.47 / 28.8k
200k 8.58 / 23.3k 7.19 / 27.8k
1M 85.69 / 11.7k 48.53 / 20.6k
2M 280.31 / 7.1k 130.14 / 15.3k

The larger the directory, the bigger the performance improvement.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: factor free block index lookup from xfs_dir2_node_addname_int()

Simplify the logic in xfs_dir2_node_addname_int() by factoring out
the free block index lookup code that finds a block with enough free
space for the entry to be added. The code that is moved gets a major
cleanup at the same time, but there is no algorithm change here.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: factor data block addition from xfs_dir2_node_addname_int()

Factor out the code that adds a data block to a directory from
xfs_dir2_node_addname_int(). This makes the code flow cleaner and
more obvious and provides clear isolation of upcoming optimsations.

Signed-off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move xfs_dir2_addname()

This gets rid of the need for a forward declaration of the static
function xfs_dir2_addname_int() and readies the code for factoring
of xfs_dir2_addname_int().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: remove more ondisk directory corruption asserts

Continue our game of replacing ASSERTs for corrupt ondisk metadata with
EFSCORRUPTED returns.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>

xfs: remove unused header files

There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.

nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: add struct xfs_mount pointer to struct xfs_buf

We need to derive the mount pointer from a buffer in a lot of place.
Add a direct pointer to short cut the pointer chasing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: move xfs_ino_geometry to xfs_shared.h

The inode geometry structure isn't related to ondisk format; it's
support for the mount structure. Move it to xfs_shared.h.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: clean up xfs_dir2_leafn_add

Remove typedefs and consolidate local variable initialization.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

xfs: Zero initialize highstale and lowstale in xfs_dir2_leafn_add

When building with -Wsometimes-uninitialized, Clang warns:

fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'lowstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'highstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]

While it isn't technically wrong, it isn't a problem in practice because
highstale and lowstale are only initialized in xfs_dir2_leafn_add when
compact is not zero then they are passed to xfs_dir3_leaf_find_entry,
where they are initialized before use when compact is zero. Regardless,
it's better not to be passing around uninitialized stack memory so zero
initialize these variables, which silences this warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/393
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: miscellaneous verifier magic value fixups

Most buffer verifiers have hardcoded magic value checks
conditionalized on the version of the filesystem. The magic value
field of the verifier structure facilitates abstraction of some of
this code. Populate the ->magic field of various verifiers to take
advantage of this abstraction. No functional changes.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: use swap macro in xfs_dir2_leafn_rebalance

Make use of the swap macro and remove unnecessary variable *tmp*. This
makes the code easier to read and maintain. Also, slightly refactor some
code.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: convert to SPDX license tags

Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}

/^ \* This program is free software/ {
hdr = 2.0;
next
}

/any later version./ {
tag = "GPL-2.0+"
next
}

/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}

/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}

/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}

// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}

END { }
$

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: explicitly pass buffer size to xfs_corruption_error

Explicitly pass the buffer length to xfs_corruption_error() instead of
assuming XFS_CORRUPTION_DUMP_LEN so that we avoid dumping off the end
of the buffer.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: sanity-check the unused space before trying to use it

In xfs_dir2_data_use_free, we examine on-disk metadata and ASSERT if
it doesn't make sense. Since a carefully crafted fuzzed image can cause
the kernel to crash after blowing a bunch of assertions, let's move
those checks into a validator function and rig everything up to return
EFSCORRUPTED to userspace. Found by lastbit fuzzing ltail.bestcount via
xfs/391.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>

xfs: convert a few more directory asserts to corruption

Yet another round of playing whack-a-mole with directory code that
asserts on corrupt on-disk metadata when it really should be returning
-EFSCORRUPTED instead of ASSERTing. Found by a xfs/391 crash while
lastbit fuzzing of ltail.bestcount.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>

Split buffer's b_fspriv field

By splitting the b_fspriv field into two different fields (b_log_item
and b_li_list). It's possible to get rid of an old ABI workaround, by
using the new b_log_item field to store xfs_buf_log_item separated from
the log items attached to the buffer, which will be linked in the new
b_li_list field.

This way, there is no more need to reorder the log items list to place
the buf_log_item at the beginning of the list, simplifying a bit the
logic to handle buffer IO.

This also opens the possibility to change buffer's log items list into a
proper list_head.

b_log_item field is still defined as a void *, because it is still used
by the log buffers to store xlog_in_core structures, and there is no
need to add an extra field on xfs_buf just for xlog_in_core.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor style changes]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: use %px for data pointers when debugging

Starting with commit 57e734423ad ("vsprintf: refactor %pK code out of
pointer"), the behavior of the raw '%p' printk format specifier was
changed to print a 32-bit hash of the pointer value to avoid leaking
kernel pointers into dmesg. For most situations that's good.

This is /undesirable/ behavior when we're trying to debug XFS, however,
so define a PTR_FMT that prints the actual pointer when we're in debug
mode.

Note that %p for tracepoints still prints the raw pointer, so in the
long run we could consider rewriting some of these messages as
tracepoints.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: change 0x%p -> %p in print messages

Since %p prepends "0x" to the outputted string, we can drop the prefix.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: create a new buf_ops pointer to verify structure metadata

Expose all metadata structure buffer verifier functions via buf_ops.
These will be used by the online scrub mechanism to look for problems
with buffers that are already sitting around in memory.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: refactor verifier callers to print address of failing check

Refactor the callers of verifiers to print the instruction address of a
failing check.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: have buffer verifier functions report failing address

Modify each function that checks the contents of a metadata buffer to
return the instruction address of the failing test so that we can report
more precise failure errors to the log.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: refactor xfs_verifier_error and xfs_buf_ioerror

Since all verification errors also mark the buffer as having an error,
we can combine these two calls. Later we'll add a xfs_failaddr_t
parameter to promote the idea of reporting corruption errors and the
address of the failing check to enable better debugging reports.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

xfs: return the hash value of a leaf1 directory block

Modify the existing dir leafn lasthash function to enable us to
calculate the highest hash value of a leaf1 block. This will be used by
the directory scrubbing code to check the sanity of hashes in leaf1
directory blocks.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>

xfs: verify free block header fields

Perform basic sanity checking of the directory free block header
fields so that we avoid hanging the system on invalid data.

(Granted that just means that now we shutdown on directory write,
but that seems better than hanging...)

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: always set rvalp in xfs_dir2_node_trim_free

xfs_dir2_node_trim_free can return with setting the rvalp argument
pointer. Initialize it to 0 at the beginning of the function and
only update it to 1 if we succeeded trimming a freespace block.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: print name of verifier if it fails

This adds a name to each buf_ops structure, so that if
a verifier fails we can print the type of verifier that
failed it. Should be a slight debugging aid, I hope.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: validate metadata LSNs against log on v5 superblocks

Since the onset of v5 superblocks, the LSN of the last modification has
been included in a variety of on-disk data structures. This LSN is used
to provide log recovery ordering guarantees (e.g., to ensure an older
log recovery item is not replayed over a newer target data structure).

While this works correctly from the point a filesystem is formatted and
mounted, userspace tools have some problematic behaviors that defeat
this mechanism. For example, xfs_repair historically zeroes out the log
unconditionally (regardless of whether corruption is detected). If this
occurs, the LSN of the filesystem is reset and the log is now in a
problematic state with respect to on-disk metadata structures that might
have a larger LSN. Until either the log catches up to the highest
previously used metadata LSN or each affected data structure is modified
and written out without incident (which resets the metadata LSN), log
recovery is susceptible to filesystem corruption.

This problem is ultimately addressed and repaired in the associated
userspace tools. The kernel is still responsible to detect the problem
and notify the user that something is wrong. Check the superblock LSN at
mount time and fail the mount if it is invalid. From that point on,
trigger verifier failure on any metadata I/O where an invalid LSN is
detected. This results in a filesystem shutdown and guarantees that we
do not log metadata changes with invalid LSNs on disk. Since this is a
known issue with a known recovery path, present a warning to instruct
the user how to recover.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: Fix file type directory corruption for btree directories

Users have occasionally reported that file type for some directory
entries is wrong. This mostly happened after updating libraries some
libraries. After some debugging the problem was traced down to
xfs_dir2_node_replace(). The function uses args->filetype as a file type
to store in the replaced directory entry however it also calls
xfs_da3_node_lookup_int() which will store file type of the current
directory entry in args->filetype. Thus we fail to change file type of a
directory entry to a proper type.

Fix the problem by storing new file type in a local variable before
calling xfs_da3_node_lookup_int().

cc: <stable@vger.kernel.org> # 3.16 - 4.x
Reported-by: Giacomo Comes <comes@naic.edu>
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: create new metadata UUID field and incompat flag

This adds a new superblock field, sb_meta_uuid. If set, along with
a new incompat flag, the code will use that field on a V5 filesystem
to compare to metadata UUIDs, which allows us to change the user-
visible UUID at will. Userspace handles the setting and clearing
of the incompat flag as appropriate, as the UUID gets changed; i.e.
setting the user-visible UUID back to the original UUID (as stored in
the new field) will remove the incompatible feature flag.

If the incompat flag is not set, this copies the user-visible UUID into
into the meta_uuid slot in memory when the superblock is read from disk;
the meta_uuid field is not written back to disk in this case.

The remainder of this patch simply switches verifiers, initializers,
etc to use the new sb_meta_uuid field.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: Use consistent logging message prefixes

The second and subsequent lines of multi-line logging messages
are not prefixed with the same information as the first line.

Separate messages with newlines into multiple calls to ensure
consistent prefixing and allow easier grep use.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: fix set-but-unused warnings

The kernel compile doesn't turn on these checks by default, so it's
only when I do a kernel-user sync that I find that there are lots of
compiler warnings waiting to be fixed. Fix up these set-but-unused
warnings.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: move most of xfs_sb.h to xfs_format.h

More on-disk format consolidation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: merge xfs_ag.h into xfs_format.h

More on-disk format consolidation. A few declarations that weren't on-disk
format related move into better suitable spots.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

xfs: global error sign conversion

Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.

Errors for conversion (and comparison) found via searches like:

$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs

Negation points found via searches like:

$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs

[ with some bits I missed from Brian Foster ]

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

libxfs: move source files

Move all the source files that are shared with userspace into
libxfs/. This is done as one big chunk simpy to get it done
quickly

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>