NFSv4/pnfs: Allow layoutget to return EAGAIN for softerr mounts

If we're using the 'softerr' mount option, we may want to allow
layoutget to return EAGAIN to allow knfsd server threads to return a
JUKEBOX/DELAY error to the client instead of busy waiting.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS: Convert buffered writes to use folios

Mostly mechanical conversion of struct page and functions into struct
folio equivalents.
The lack of support for folios in write_cache_pages(), means we still
only support order 0 folio allocations. However the rest of the
writeback code should now be ready for order n > 0.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked

If the layout is recalled or revoked, we want to cancel I/O as quickly
as possible so that we can return the layout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Avoid a live lock condition in pnfs_update_layout()

If we're about to send the first layoutget for an empty layout, we want
to make sure that we drain out the existing pending layoutget calls
first. The reason is that these layouts may have been already implicitly
returned to the server by a recall to which the client gave a
NFS4ERR_NOMATCHING_LAYOUT response.

The problem is that wait_var_event_killable() could in principle see the
plh_outstanding count go back to '1' when the first process to wake up
starts sending a new layoutget. If it fails to get a layout, then this
loop can continue ad infinitum...

Fixes: 0b77f97a7e42 ("NFSv4/pnfs: Fix layoutget behaviour after invalidation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.

Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.

Reported-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS: Move NFS protocol display macros to global header

Refactor: surface useful show_ macros so they can be shared between
the client and server trace code.

Additional clean up:
- Housekeeping: ensure the correct #include files are pulled in
and add proper TRACE_DEFINE_ENUM where they are missing
- Use a consistent naming scheme for the helpers
- Store values to be displayed symbolically as unsigned long, as
that is the type that the __print_yada() functions take

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS: Fix an Oops in pnfs_mark_request_commit()

Olga reports seeing the following Oops when doing O_DIRECT writes to a
pNFS flexfiles server:

Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 234186 Comm: kworker/u8:1 Not tainted 5.15.0-rc4+ #4
Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Workqueue: nfsiod rpc_async_release [sunrpc]
RIP: 0010:nfs_mark_request_commit+0x12/0x30 [nfs]
Code: ff ff be 03 00 00 00 e8 ac 34 83 eb e9 29 ff ff
ff e8 22 bc d7 eb 66 90 0f 1f 44 00 00 48 85 f6 74 16 48 8b 42 10 48
8b 40 18 <48> 8b 40 18 48 85 c0 74 05 e9 70 fc 15 ec 48 89 d6 e9 68 ed
ff ff
RSP: 0018:ffffa82f0159fe00 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8f3393141880 RCX: 0000000000000000
RDX: ffffa82f0159fe08 RSI: ffff8f3381252500 RDI: ffff8f3393141880
RBP: ffff8f33ac317c00 R08: 0000000000000000 R09: ffff8f3487724cb0
R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8f3485bccee0 R14: ffff8f33ac317c10 R15: ffff8f33ac317cd8
FS: 0000000000000000(0000) GS:ffff8f34fbc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000122120006 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
nfs_direct_write_completion+0x13b/0x250 [nfs]
rpc_free_task+0x39/0x60 [sunrpc]
rpc_async_release+0x29/0x40 [sunrpc]
process_one_work+0x1ce/0x370
worker_thread+0x30/0x380
? process_one_work+0x370/0x370
kthread+0x11a/0x140
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 9c455a8c1e14 ("NFS/pNFS: Clean up pNFS commit operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: We want return-on-close to complete when evicting the inode

If the inode is being evicted, it should be safe to run return-on-close,
so we should do it to ensure we don't inadvertently leak layout segments.

Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode

When returning the layout in nfs4_evict_inode(), we need to ensure that
the layout is actually done being freed before we can proceed to free the
inode itself.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4/pNFS: Store the transport type in struct nfs4_pnfs_ds_addr

We want to enable RDMA and UDP as valid transport methods if a
GETDEVICEINFO call specifies it. Do so by adding a parser for the
netid that translates it to an appropriate argument for the RPC
transport layer.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS: Fix flexfiles read failover

The current mirrored read failover code is correctly resetting the mirror
index between failed reads, however it is not able to actually flip the
RPC call over to the next RPC client.
The end result is that we keep resending the RPC call to the same client
over and over.

The fix is to use the pnfs_read_resend_pnfs() mechanism to schedule a
new RPC call, but we need to add the ability to pass in a mirror
index so that we always retry the next mirror in the list.

Fixes: 166bd5b889ac ("pNFS/flexfiles: Fix layoutstats handling during read failovers")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS/flexfiles: Check the layout segment range before doing I/O

When starting to read or write with a layout segment, check that the
range matches our request.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS/pNFS: Clean up pNFS commit operations

Move the pNFS commit related operations into a separate structure
that can be carried by the pnfs_ds_commit_info.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS/pNFS: Add a helper pnfs_generic_search_commit_reqs()

Lift filelayout_search_commit_reqs() into the generic pnfs/nfs code,
and add support for commit arrays.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: Enable per-layout segment commit structures

Enable adding and lookup of per-layout segment commits in filelayout
and flexfilelayout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: Add infrastructure for cleaning up per-layout commit structures

Ensure that both the file and flexfiles layout types clean up when
freeing the layout segments.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS/pNFS: Allow O_DIRECT to release the DS commitinfo

Add a pNFS callback to allow the O_DIRECT code to release the DS
commitinfo when freeing the dreq.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4/pnfs: Support a list of commit arrays in struct pnfs_ds_commit_info

When we have multiple layout segments with different lists of mirrored
data, we need to track the commits on a per layout segment basis.
This patch adds a list to support this tracking in struct
pnfs_ds_commit_info.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: Add a helper to allocate the array of buckets

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4: Add support for CB_RECALL_ANY for flexfiles layouts

When we receive a CB_RECALL_ANY that asks us to return flexfiles
layouts, we iterate through all the layouts and look at whether or
not there are active open file descriptors that might need them
for I/O. If there are no such descriptors, we return the layouts.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4: Ensure layout headers are RCU safe

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4/pnfs: pnfs_set_layout_stateid() should update the layout cred

If the cred assigned to the layout that we're updating differs from
the one used to retrieve the new layout segment, then we need to
update the layout plh_lc_cred field.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS/flexfiles: Record resend attempts on I/O failure

If the attempt to do pNFS fails, then record what action we
take to recover (resend, reset to pnfs or reset to mds).

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid

If a LAYOUTRETURN receives a reply of NFS4ERR_OLD_STATEID then assume we've
missed an update, and just bump the stateid.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFSv4: Clean up pNFS return-on-close error handling

Both close and delegreturn have identical code to handle pNFS
return-on-close. This patch refactors that code and places it
in pnfs.c

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS: Add a helper to return a pointer to the open context of a struct nfs_page

Add a helper for when we remove the explicit pointer to the open
context.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS/flexfiles: Speed up read failover when DSes are down

If we notice that a DS may be down, we should attempt to read from the
other mirrors first before we go back to retry the dead DS.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS/pnfs: Bulk destroy of layouts needs to be safe w.r.t. umount

If a bulk layout recall or a metadata server reboot coincides with a
umount, then holding a reference to an inode is unsafe unless we
also hold a reference to the super block.

Fixes: fd9a8d7160937 ("NFSv4.1: Fix bulk recall and destroy of layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.

SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.

This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.

For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.

Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Don't allocate more pages than we need to fit a layoutget response

For the 'files' and 'flexfiles' layout types, we do not expect the reply
to be any larger than 4k. The block and scsi layout types are a little more
greedy, so we keep allocating the maximum response size for now.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: When updating the stateid in layoutreturn, also update the recall range

When we update the layout stateid in nfs4_layoutreturn_refresh_stateid, we
should also update the range in order to let the server know we're actually
returning everything.

Fixes: 16c278dbfa63 ("pnfs: Fix handling of NFS4ERR_OLD_STATEID replies...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: Fix handling of NFS4ERR_OLD_STATEID replies to layoutreturn

If the server tells us that out layoutreturn raced with another layout
update, then we must ensure that the new layout segments are not in use
before we resend with an updated layout stateid.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Don't send layoutreturn if the layout is already invalid

If the layout was invalidated due to a reboot, then don't try to send
a layoutreturn for it.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pnfs: Fix manipulation of NFS_LAYOUT_FIRST_LAYOUTGET

The flag was not always being cleared after LAYOUTGET on OPEN.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pNFS: Refactor nfs4_layoutget_release()

Move the actual freeing of the struct nfs4_layoutget into fs/nfs/pnfs.c
where it can be reused by the layoutget on open code.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pnfs: Add LAYOUTGET to OPEN of a new file

This triggers when have no pre-existing inode to attach to.
The preexisting case is saved for later.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pnfs: move allocations out of nfs4_proc_layoutget

They work better in the new alloc_init function.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pnfs: Add layout driver flag PNFS_LAYOUTGET_ON_OPEN

Driver can set flag to allow LAYOUTGET to be sent with OPEN.

Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

pnfs/blocklayout: handle transient devices

PNFS block/SCSI layouts should gracefully handle cases where block devices
are not available when a layout is retrieved, or the block devices are
removed while the client holds a layout.

While setting up a layout segment, keep a record of an unavailable or
un-parsable block device in cache with a flag so that subsequent layouts do
not spam the server with GETDEVINFO. We can reuse the current
NFS_DEVICEID_UNAVAILABLE handling with one variation: instead of reusing
the device, we will discard it and send a fresh GETDEVINFO after the
timeout, since the lookup and validation of the device occurs within the
GETDEVINFO response handling.

A lookup of a layout segment that references an unavailable device will
return a segment with the NFS_LSEG_UNAVAILABLE flag set. This will allow
the pgio layer to mark the layout with the appropriate fail bit, which
forces subsequent IO to the MDS, and prevents spamming the server with
LAYOUTGET, LAYOUTRETURN.

Finally, when IO to a block device fails, look up the block device(s)
referenced by the pgio header, and mark them as unavailable.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs/blocklayout: set PNFS_LAYOUTRETURN_ON_ERROR

If there's an error doing I/O to block device, and the client resends the
I/O to the MDS, the MDS must recall the layout from the client before
processing the I/O. Let's preempt that exchange by returning the layout
before falling back to the MDS when there's an error.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close

If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID,
then try to update the stateid and retry. We know that there should
be no further LAYOUTGET requests being launched.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

fs, nfs: convert pnfs_layout_hdr.plh_refcount from atomic_t to refcount_t

atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable pnfs_layout_hdr.plh_refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

fs, nfs: convert pnfs_layout_segment.pls_refcount from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

fs, nfs: convert nfs4_pnfs_ds.ds_count from atomic_t to refcount_t

atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nfs4_pnfs_ds.ds_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFSv4/pnfs: Replace pnfs_put_lseg_locked() with pnfs_put_lseg()

Now that we no longer hold the inode->i_lock when manipulating the
commit lists, it is safe to call pnfs_put_lseg() again.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: Fix the check for requests in range of layout segment

It's possible and acceptable for NFS to attempt to add requests beyond the
range of the current pgio->pg_lseg, a case which should be caught and
limited by the pg_test operation. However, the current handling of this
case replaces pgio->pg_lseg with a new layout segment (after a WARN) within
that pg_test operation. That will cause all the previously added requests
to be submitted with this new layout segment, which may not be valid for
those requests.

Fix this problem by only returning zero for the number of bytes to coalesce
from pg_test for this case which allows any previously added requests to
complete on the current layout segment. The check for requests starting
out of range of the layout segment moves to pg_init, so that the
replacement of pgio->pg_lseg will be done when the next request is added.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Ensure we check layout segment validity in the pg_init() callback

If we have a layout segment cached in pgio->pg_lseg, we should check it
for validity before reusing it in a new RPC request. Otherwise, if we
recoalesce, we can end up looping forever.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Remove unused layout driver callbacks

encode_layoutreturn and encode_layoutcommit are now unused. Let's
remove them.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: return status from nfs4_pnfs_ds_connect

The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.

This checks that the rpc_create succeeded and returns the error to the
caller.

When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS/flexfiles: Minor refactoring before adding iostats to layoutreturn

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Add a layoutreturn callback to performa layout-private setup

Add a callback to allow the flexfiles layout driver to initialise the
layout private payload.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS: Remove unused authflavour parameter from nfs_get_client()

This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so
let's remove it from this function and callers.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Enable layoutreturn operation for return-on-close

Amend the pnfs return on close helper functions to enable sending the
layoutreturn op in CLOSE/DELEGRETURN. This closes a potential race between
CLOSE/DELEGRETURN and parallel OPEN calls to the same file, and allows the
client and the server to agree on whether or not there is an outstanding
layout.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Get rid of unnecessary layout parameter in encode_layoutreturn callback

The parameter is already present in the "args" structure.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4: Ignore LAYOUTRETURN result if the layout doesn't match or is invalid

Fix a potential race with CB_LAYOUTRECALL in which the server recalls the
remaining layout segments while our LAYOUTRETURN is still in transit.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Do not free layout segments that are marked for return

We may want to process and transmit layout stat information for the
layout segments that are being returned, so we should defer freeing
them until after the layoutreturn has completed.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: consolidate the different range intersection tests

Both pnfs.c and the flexfiles code have their own versions of the
range intersection testing, and the "end_offset" helper.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: On error, do not send LAYOUTGET until the LAYOUTRETURN has completed

If there is an I/O error, we should not call LAYOUTGET until the
LAYOUTRETURN that reports the error is complete.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.8+

pnfs: add a new mechanism to select a layout driver according to an ordered list

Currently, the layout driver selection code always chooses the first one
from the list. That's not really ideal however, as the server can send
the list of layout types in any order that it likes. It's up to the
client to select the best one for its needs.

This patch adds an ordered list of preferred driver types and has the
selection code sort the list of available layout drivers according to it.
Any unrecognized layout type is sorted to the end of the list.

For now, the order of preference is hardcoded, but it should be possible
to make this configurable in the future.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: track multiple layout types in fsinfo structure

Current NFSv4.1/pNFS client assumes that MDS supports only one layout
type. While it's true for most existing servers, nevertheless, this can
be change in the near future.

For now, this patch just plumbs in the ability to track a list of
layouts in the fsinfo structure. The existing behavior of the client
is preserved, by having it just select the first entry in the list.

Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()

That's already being taken care of in pnfs_layout_remove_lseg().

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()

Ensure nfs42_layoutstat_done() layoutget don't open code layout stateid
invalidation.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: LAYOUTRETURN should only update the stateid if the layout is valid

If the layout was completely returned, then ignore the returned layout
stateid.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: Don't mark the inode as revalidated if a LAYOUTCOMMIT is outstanding

We know that the attributes will need updating if there is still a
LAYOUTCOMMIT outstanding.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: pnfs_layoutcommit_outstanding() is no longer used when !CONFIG_NFS_V4_1

Cleanup...

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: pnfs_update_layout needs to consider if strict iomode checking is on

As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.

Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: rework LAYOUTGET retry handling

There are several problems in the way a stateid is selected for a
LAYOUTGET operation:

We pick a stateid to use in the RPC prepare op, but that makes
it difficult to serialize LAYOUTGETs that use the open stateid. That
serialization is done in pnfs_update_layout, which occurs well before
the rpc_prepare operation.

Between those two events, the i_lock is dropped and reacquired.
pnfs_update_layout can find that the list has lsegs in it and not do any
serialization, but then later pnfs_choose_layoutget_stateid ends up
choosing the open stateid.

This patch changes the client to select the stateid to use in the
LAYOUTGET earlier, when we're searching for a usable layout segment.
This way we can do it all while holding the i_lock the first time, and
ensure that we serialize any LAYOUTGET call that uses a non-layout
stateid.

This also means a rework of how LAYOUTGET replies are handled, as we
must now get the latest stateid if we want to retransmit in response
to a retryable error.

Most of those errors boil down to the fact that the layout state has
changed in some fashion. Thus, what we really want to do is to re-search
for a layout when it fails with a retryable error, so that we can avoid
reissuing the RPC at all if possible.

While the LAYOUTGET RPC is async, the initiating thread always waits for
it to complete, so it's effectively synchronous anyway. Currently, when
we need to retry a LAYOUTGET because of an error, we drive that retry
via the rpc state machine.

This means that once the call has been submitted, it runs until it
completes. So, we must move the error handling for this RPC out of the
rpc_call_done operation and into the caller.

In order to handle errors like NFS4ERR_DELAY properly, we must also
pass a pointer to the sliding timeout, which is now moved to the stack
in pnfs_update_layout.

The complicating errors are -NFS4ERR_RECALLCONFLICT and
-NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give
up and return NULL back to the caller. So, there is some special
handling for those errors to ensure that the layers driving the retries
can handle that appropriately.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args

LAYOUTRETURN is "special" in that servers and clients are expected to
work with old stateids. When the client sends a LAYOUTRETURN with an old
stateid in it then the server is expected to only tear down layout
segments that were present when that seqid was current. Ensure that the
client handles its accounting accordingly.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: keep track of the return sequence number in pnfs_layout_hdr

When we want to selectively do a LAYOUTRETURN, we need to specify a
stateid that represents most recent layout acquisition that is to be
returned.

When we mark a layout stateid to be returned, we update the return
sequence number in the layout header with that value, if it's newer
than the existing one. Then, when we go to do a LAYOUTRETURN on
layout header put, we overwrite the seqid in the stateid with the
saved one, and then zero it out.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: record sequence in pnfs_layout_segment when it's created

In later patches, we're going to teach the client to be more selective
about how it returns layouts. This means keeping a record of what the
stateid's seqid was at the time that the server handed out a layout
segment.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

pnfs: set NFS_IOHDR_REDO in pnfs_read_resend_pnfs

Like other resend paths, mark the (old) hdr as NFS_IOHDR_REDO. This
ensures the hdr completion function will not count the (old) hdr
as good bytes.

Also, vector the error back through the hdr->task.tk_status like other
retry calls.

This fixes a bug with the FlexFiles layout where libaio was reporting more
bytes read than requested.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSE

NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a
layoutreturn is needed, either due to a layout recall or to a
layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order
to clarify its purpose.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout

Fix a bug whereby if all the layout segments could be immediately freed,
the call to pnfs_error_mark_layout_for_return() would never result in
a layoutreturn.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid

If the layout segment is invalid, then we should not be adding more
write requests to the commit list. Instead, those writes should be
replayed after requesting a new layout.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS: If we have to delay the layout callback, mark the layout for return

If the client needs to delay the layout callback, then speed up the recall
process by marking the remaining layout segments to be actively returned
by the client.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pNFS: Add a helper to mark the layout as returned

This ensures that we don't reuse the stateid if a layout return or
implied layout return means that we've returned all layout segments

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pNFS/flexfiles: Don't prevent flexfiles client from retrying LAYOUTGET

Fix a bug in which flexfiles clients are falling back to I/O through the
MDS even when the FF_FLAGS_NO_IO_THRU_MDS flag is set.

The flexfiles client will always report errors through the LAYOUTRETURN
and/or LAYOUTERROR mechanisms, so it should normally be safe for it
to retry the LAYOUTGET until it fails or succeeds.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS41: make close wait for layoutreturn

If we send a layoutreturn asynchronously before close, the close
might reach server first and layoutreturn would fail with BADSTATEID
because there is nothing keeping the layout stateid alive.

Also do not pretend sending layoutreturn if we are not.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/flexfiles: Allow coalescing of new layout segments and existing ones

In order to ensure atomicity of updates, we merge the old layout segments
into the new ones, and then invalidate the old ones.

Also ensure that we order the list of layout segments so that
RO segments are preferred over RW.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs: Allow pNFS device drivers to customise layout segment insertion

This is needed in order to allow merging of contiguous layout segments,
and also to correct the ordering of layouts for those device drivers that
don't necessarily want to place the read-write layouts first.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs Improve the packing of struct pnfs_layout_hdr

Eliminate a couple of holes in the structure, and move the 2 atomics
into the same cacheline.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.2/pnfs: Make the layoutstats timer configurable

Allow advanced users to set the layoutstats timer in order to lengthen
or shorten the period between layoutstat transmissions to the server.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS41: remove NFS_LAYOUT_ROC flag

If we return delegation before closing, we fail to do roc check
during close because NFS_LAYOUT_ROC is cleared by delegreturn
and it causes layouts to be still hanging around after delegreturn
+ close, which is a voilation against protocol.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs: Fix a close/delegreturn hang when return-on-close is set

The helper pnfs_roc() has already verified that we have no delegations,
and no further open files, hence no outstanding I/O and it has marked
all the return-on-close lsegs as being invalid.
Furthermore, it sets the NFS_LAYOUT_RETURN bit, thus serialising the
close/delegreturn with all future layoutget calls on this inode.

The checks in pnfs_roc_drain() for valid layout segments are therefore
redundant: those cannot exist until another layoutget completes.
The other check for whether or not NFS_LAYOUT_RETURN is set, actually
causes a hang, since we already know that we hold that flag.

To fix, we therefore strip out all the functionality in pnfs_roc_drain()
except the retrieval of the barrier state, and then rename the function
accordingly.

Reported-by: Christoph Hellwig <hch@infradead.org>
Fixes: 5c4a79fb2b1c ("Don't prevent layoutgets when doing return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.2/pnfs: Use GFP_NOIO for layoutstat reporting in the writeback path

Prevent a potential deadlock.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs: provide pnfs_report_layoutstat when NFS42 is disabled

kbuild test robot reported:
fs/built-in.o: In function `pnfs_report_layoutstat':
>> (.text+0x151a1c): undefined reference to `nfs42_proc_layoutstats_generic'

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add pnfs_report_layoutstat helper function

Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

NFSv4.1/pnfs: Separate out metadata and data consistency for pNFS

The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.

This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs: Refactor pnfs_set_layoutcommit()

pnfs_set_layoutcommit() and pnfs_commit_set_layoutcommit() are 100% identical
except for the function arguments. Refactor to eliminate the difference.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1: Don't cache deviceids that have no notifications

The spec says that once all layouts that reference a given deviceid
have been returned, then we are only allowed to continue to cache
the deviceid if the metadata server supports notifications.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1: Convert pNFS deviceid to use kfree_rcu()

Use of synchronize_rcu() when unmounting and potentially freeing a lot
of deviceids is problematic. There really is no reason why we can't just
use kfree_rcu() here.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit

The File Layout's filelayout_mark_request_commit() is almost the
Flex File Layout's ff_layout_mark_request_commit(). And that can
be reduced by calling into nfs_request_add_commit_list().

Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs/flexfiles: Add the FlexFile Layout Driver

The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>

nfs41: wait for LAYOUTRETURN before retrying LAYOUTGET

Also take care to stop waiting if someone clears retry bit.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>

nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags

Use it to indicate that LD wants to retry layoutget. LD can set
it whenever it wants the common pnfs code to return and retry
pnfs path through a new layout.

The bit gets cleared when client does a new layoutget, when client
closes the file (ROC case), or when kernel needs to evict the inode
(non-ROC case).

Signed-off-by: Peng Tao <tao.peng@primarydata.com>

nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE

When it is set, generic pnfs would try to send layoutreturn right
before last close/delegation_return regard less NFS_LAYOUT_ROC is
set or not. LD can then make sure layoutreturn is always sent
rather than being omitted.

The difference against NFS_LAYOUT_RETURN is that
NFS_LAYOUT_RETURN_BEFORE_CLOSE does not block usage of the layout so
LD can set it and expect generic layer to try pnfs path at the
same time.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

nfs41: allow async version layoutreturn

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

pnfs: allow LD to ask to resend read through pnfs

If current IO cannot be completed due to some transient errors,
LD may want to ask generic layer to resend the request through
pnfs again.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

pnfs: pass ds_commit_idx through the commit path

Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.

Signed-off-by: Tom Haynes <loghyr@primarydata.com>

pnfs: release lseg in pnfs_generic_pg_cleanup

This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

nfs41: don't use a layout if it is marked for returning

And if we are to return the same type of layouts, don't bother
sending more layoutgets.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: add a helper to mark layout for return

It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.

It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: serialize first layoutget of a file

Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.

In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: create NFSv3 DS connection if specified

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: allow LD to choose DS connection version/minor_version

flexfile layout may need to set such when making DS connections.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: move file layout macros to generic pnfs

They can be reused by flexfile layout as well.

Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: allow LD to choose DS connection auth flavor

flexfile layout may use different auth flavor as specified by MDS.

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: pull nfs4_ds_connect from file layout to generic pnfs

It can be reused by flexfiles layout client.

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: pull decode_ds_addr from file layout to generic pnfs

It can be reused by flexfile layout.

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

nfs41: pull data server cache from file layout to generic pnfs

Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.

They can all be reused by flexfile layout as well.

Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

pnfs: Do not grab the commit_info lock twice when rescheduling writes

Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

pnfs: Prepare for flexfiles by pulling out common code

The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.

Signed-off-by: Tom Haynes <loghyr@primarydata.com>

NFSv4.1: Optimise layout return-on-close

Optimise the layout return on close code by ensuring that

1) Add a check for whether we hold a layout before taking any spinlocks
2) Only take the spin lock once
3) Use nfs_state->state to speed up open file checks

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1/pnfs: replace broken pnfs_put_lseg_async

You cannot call pnfs_put_lseg_async() more than once per lseg, so it
is really an inappropriate way to deal with a refcount issue.

Instead, replace it with a function that decrements the refcount, and
puts the final 'free' operation (which is incompatible with locks) on
the workqueue.

Cc: Weston Andros Adamson <dros@primarydata.com>
Fixes: e6cf82d1830f: pnfs: add pnfs_put_lseg_async
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4: Remove dead prototype for nfs4_insert_deviceid_node()

nfs4_insert_deviceid_node() was removed in 661373b13d0490ff410a2133d4a7a117f2dd037e

Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs41: change PNFS_LAYOUTRET_ON_SETATTR to only return on truncation to smaller size

Both blocks layout and objects layout want to use it to avoid CB_LAYOUTRECALL
but that should only happen if client is doing truncation to a smaller size.
For other cases, we let server decide if it wants to recall client's layouts.
Change PNFS_LAYOUTRET_ON_SETATTR to follow the logic and not to send
layoutreturn unnecessarily.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: remove GETDEVICELIST implementation

The current GETDEVICELIST implementation is buggy in that it doesn't handle
cursors correctly, and in that it returns an error if the server returns
NFSERR_NOTSUPP. Given that there is no actual need for GETDEVICELIST,
it has various issues and might get removed for NFSv4.2 stop using it in
the blocklayout driver, and thus the Linux NFS client as whole.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add a nfs4_get_deviceid helper

This will be used by the block layout driver when splitting extents.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add a common GETDEVICELIST implementation

At a simple helper to issue a GETDEVICELIST operation and pre-load
the device id cache based on the result.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: factor GETDEVICEINFO implementations

Add support to the common pNFS core to issue GETDEVICEINFO calls on
a device ID cache miss. The code is taken from the well debugged
file layout implementation and calls out to the layoutdriver through
a new alloc_deviceid_node method. The calling conventions for
nfs4_find_get_deviceid are changed so that all information needed to
send a GETDEVICEINFO request is passed to the common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add return_range method

If a layout driver keeps per-inode state outside of the layout segments it
needs to be notified of any layout returns or recalls on an inode, and not
just about the freeing of layout segments. Add a method to acomplish this,
which will allow the block layout driver to handle the case of truncated
and re-expanded files properly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add flag to force read-modify-write in ->write_begin

Like all block based filesystems, the pNFS block layout driver can't read
or write at a byte granularity and thus has to perform read-modify-write
cycles on writes smaller than this granularity.

Add a flag so that the core NFS code always reads a whole page when
starting a smaller write, so that we can do it in the place where the VFS
expects it instead of doing in very deadlock prone way in the writeback
handler.

Note that in theory we could do less than page size reads here for disks
that have a smaller sector size which are served by a server with a smaller
pnfs block size. But so far that doesn't seem like a worthwhile
optimization.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: allow splicing pre-encoded pages into the layoutcommit args

Currently there is no XDR buffer space allocated for the per-layout driver
layoutcommit payload, which leads to server buffer overflows in the
blocklayout driver even under simple workloads. As we can't do per-layout
sizes for XDR operations we'll have to splice a previously encoded list
of pages into the XDR stream, similar to how we handle ACL buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: avoid using stale stateids after layoutreturn

After we issued a layoutreturn operations the may free the layout stateid
and will thus cause bad stateid error when the client uses it again.

We currently try to avoid this case by chosing the open stateid if not
lsegs are present for this inode. But various places can hold refererence
on lsegs and thus cause the list not to be empty shortly after a layout
return. Add an explicit flag to mark the current layout stateid invalid
and force usage of the openstateid after we did a full file layoutreturn.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs41: add a helper function to set layoutcommit after commit

Track lwb in nfs_commit_data so that we can use it to setup
layoutcommit in commit_done callback.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: add pnfs_put_lseg_async

This is useful when lsegs need to be released while holding locks.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: find swapped pages on pnfs commit lists too

nfs_page_find_head_request_locked looks through the regular nfs commit lists
when the page is swapped out, but doesn't look through the pnfs commit lists.

I'm not sure if anyone has hit any issues caused by this.

Suggested-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

pnfs: clean up *_resend_to_mds

Clean up pnfs_read_done_resend_to_mds and pnfs_write_done_resend_to_mds:
- instead of passing all arguments from a nfs_pgio_header, just pass the header
- share the common code

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs: merge nfs_pgio_data into _header

struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header. This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs: modify pg_test interface to return size_t

This is a step toward allowing pg_test to inform the the
coalescing code to reduce the size of requests so they may fit in
whatever scheme the pg_test callback wants to define.

For now, just return the size of the request if there is space, or 0
if there is not. This shouldn't change any behavior as it acts
the same as when the pg_test functions returned bool.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFS: Create a common read and write data struct

At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs: remove ->read_pageio_init from rpc ops

The read_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector. The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_read based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs: remove ->write_pageio_init from rpc ops

The write_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector. The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_write based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

arch: Mass conversion of smp_mb__*()

Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding

If a LAYOUTCOMMIT is outstanding, then chances are that the metadata
server may still be returning incorrect values for the change attribute,
ctime, mtime and/or size.
Just ignore those attributes for now, and wait for the LAYOUTCOMMIT
rpc call to finish.

Reported-by: shaobingqing <shaobingqing@bwstor.com.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize

The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the XDR overhead.

The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC
headers (including security flavor credentials and verifiers).

Split out the struct pnfs_device field maxcount which is the gdia_maxcount
from the pglen field which is the reply (the total) buffer length.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Use layout credentials for get_deviceinfo calls

This is not strictly needed, since get_deviceinfo is not allowed to
return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway
for consistency with other pNFS operations.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Add a helper pnfs_commit_and_return_layout

In order to be able to safely return the layout in nfs4_proc_setattr,
we need to block new uses of the layout, wait for all outstanding
users of the layout to complete, commit the layout and then return it.

This patch adds a helper in order to do all this safely.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>

pnfs: fix resend_to_mds for directio

Pass the directio request on pageio_init to clean up the API.

Percolate pg_dreq from original nfs_pageio_descriptor to the
pnfs_{read,write}_done_resend_to_mds and use it on respective
call to nfs_pageio_init_{read,write} on the newly created
nfs_pageio_descriptor.

Reproduced by command:
mount -o vers=4.1 server:/ /mnt
dd bs=128k count=8 if=/dev/zero of=/mnt/dd.out oflag=direct

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
PGD 34786067 PUD 34794067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: nfs_layout_nfsv41_files nfsv4 nfs nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc btrfs zlib_deflate libcrc32c ipv6 autofs4
CPU 1
Pid: 259, comm: kworker/1:2 Not tainted 3.8.0-rc6 #2 Bochs Bochs
RIP: 0010:[<ffffffffa021a3a8>] [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
RSP: 0018:ffff880038f8fa68 EFLAGS: 00010206
RAX: ffffffffa021a6a9 RBX: ffff880038f8fb48 RCX: 00000000000a0000
RDX: ffffffffa021e616 RSI: ffff8800385e9a40 RDI: 0000000000000028
RBP: ffff880038f8fa68 R08: ffffffff81ad6720 R09: ffff8800385e9510
R10: ffffffffa0228450 R11: ffff880038e87418 R12: ffff8800385e9a40
R13: ffff8800385e9a70 R14: ffff880038f8fb38 R15: ffffffffa0148878
FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000028 CR3: 0000000034789000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/1:2 (pid: 259, threadinfo ffff880038f8e000, task ffff880038302480)
Stack:
ffff880038f8fa78 ffffffffa021a6bf ffff880038f8fa88 ffffffffa021bb82
ffff880038f8fae8 ffffffffa021f454 ffff880038f8fae8 ffffffff8109689d
ffff880038f8fab8 ffffffff00000006 0000000000000000 ffff880038f8fb48
Call Trace:
[<ffffffffa021a6bf>] nfs_direct_pgio_init+0x16/0x18 [nfs]
[<ffffffffa021bb82>] nfs_pgheader_init+0x6a/0x6c [nfs]
[<ffffffffa021f454>] nfs_generic_pg_writepages+0x51/0xf8 [nfs]
[<ffffffff8109689d>] ? mark_held_locks+0x71/0x99
[<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc]
[<ffffffffa021bc25>] nfs_pageio_doio+0x1a/0x43 [nfs]
[<ffffffffa021be7c>] nfs_pageio_complete+0x16/0x2c [nfs]
[<ffffffffa02608be>] pnfs_write_done_resend_to_mds+0x95/0xc5 [nfsv4]
[<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc]
[<ffffffffa028e27f>] filelayout_reset_write+0x8c/0x99 [nfs_layout_nfsv41_files]
[<ffffffffa028e5f9>] filelayout_write_done_cb+0x4d/0xc1 [nfs_layout_nfsv41_files]
[<ffffffffa024587a>] nfs4_write_done+0x36/0x49 [nfsv4]
[<ffffffffa021f996>] nfs_writeback_done+0x53/0x1cc [nfs]
[<ffffffffa021fb1d>] nfs_writeback_done_common+0xe/0x10 [nfs]
[<ffffffffa028e03d>] filelayout_write_call_done+0x28/0x2a [nfs_layout_nfsv41_files]
[<ffffffffa01488a1>] rpc_exit_task+0x29/0x87 [sunrpc]
[<ffffffffa014a0c9>] __rpc_execute+0x11d/0x3cc [sunrpc]
[<ffffffff810969dc>] ? trace_hardirqs_on_caller+0x117/0x173
[<ffffffffa014a39f>] rpc_async_schedule+0x27/0x32 [sunrpc]
[<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc]
[<ffffffff8105f8c1>] process_one_work+0x226/0x422
[<ffffffff8105f7f4>] ? process_one_work+0x159/0x422
[<ffffffff81094757>] ? lock_acquired+0x210/0x249
[<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc]
[<ffffffff810600d8>] worker_thread+0x126/0x1c4
[<ffffffff8105ffb2>] ? manage_workers+0x240/0x240
[<ffffffff81064ef8>] kthread+0xb1/0xb9
[<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65
[<ffffffff815206ec>] ret_from_fork+0x7c/0xb0
[<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65
Code: 00 83 38 02 74 12 48 81 4b 50 00 00 01 00 c7 83 60 07 00 00 01 00 00 00 48 89 df e8 55 fe ff ff 5b 41 5c 5d c3 66 90 55 48 89 e5 <f0> ff 07 5d c3 55 48 89 e5 f0 ff 0f 0f 94 c0 84 c0 0f 95 c0 0f
RIP [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs]
RSP <ffff880038f8fa68>
CR2: 0000000000000028

Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [>= 3.6]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Fix bulk recall and destroy of layouts

The current code in pnfs_destroy_all_layouts() assumes that removing
the layout from the server->layouts list is sufficient to make it
invisible to other processes. This ignores the fact that most
users access the layout through the nfs_inode->layout...
There is further breakage due to lack of reference counting of the
layouts, meaning that the whole thing Oopses at the drop of a hat.

The code in initiate_bulk_draining() is almost correct, and can be
used as a model for pnfs_destroy_all_layouts(), so move that
code to pnfs.c, and refactor the code to allow us to choose between
a single filesystem bulk recall, and a recall of all layouts.
Also note that initiate_bulk_draining() currently calls iput() while
holding locks. Fix that too.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

NFSv4.1: Do not call pnfs_return_layout() from an rpciod context

Move the call to pnfs_return_layout() to the read and write rpc_release()
callbacks, so that it gets called from nfsiod, which is a more appropriate
context.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS41: send real write size in layoutget

For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.

For direct write, both block layout and object layout use dreq->bytes_left.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Remove the NFS_LAYOUT_RETURNED state

It serves no purpose that the test for whether or not we have valid
layout segments doesn't already serve.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Get rid of the NFS_LAYOUT_DESTROYED state

We already have a mechanism for blocking LAYOUTGET by means of the
plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED
provides at this point is to block layoutget once the layout segment
list is empty, which basically means that you have to wait until
the pnfs_layout_hdr is destroyed before you can do pNFS on that file
again.

This patch enables the reuse of the pnfs_layout_hdr if the layout
segment list is empty.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Get rid of pNFS layout state "NFS_LAYOUT_INVALID"

In all cases where we set NFS_LAYOUT_INVALID, we also set NFS_LAYOUT_DESTROYED.
Furthermore, in all cases where we test for NFS_LAYOUT_INVALID, we should
also be testing for NFS_LAYOUT_DESTROYED, since the latter means that
we hold no valid layout segments.
Ergo the two are redundant.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Fix a race in the pNFS return-on-close code

If we sleep after dropping the inode->i_lock, then we are no longer
atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: pNFS data servers may be temporarily offline

In cases where the pNFS data server is just temporarily out of service,
we want to mark it as such, and then try again later. Typically that will
be in cases of network connection errors etc.
This patch allows us to mark the devices as being "unavailable" for such
transient errors, and will make them available for retries after a
2 minute timeout period.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Retry pNFS after a 2 minute timeout

If we had to fall back to read/write through MDS, then assume that we should
retry pNFS after a suitable timeout period.
The following patch sets a timeout of 2 minutes.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Add helpers for setting/reading the I/O fail bit

...and make them local to the pnfs.c file.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Cleanup; add "pnfs_" prefix to put_lseg() and get_lseg()

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Cleanup; add "pnfs_" prefix to get_layout_hdr() and put_layout_hdr()

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Cleanup add a "pnfs_" prefix to mark_matching_lsegs_invalid

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Clean up the pNFS layoutget interface

Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: nfs4_proc_layoutget returns void

since the only user of nfs4_proc_layoutget is send_layoutget, which
ignores its return value, there is no reason to return any value.

Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: defer release of pages in layoutget

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.

Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 mark layout when already returned

When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.

Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Create an write_pageio_init() function

pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Create an read_pageio_init() function

pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS4: Fix open bug when pnfs module blacklisted

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 cache mdsthreshold values on OPEN

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 resend LAYOUTGET on data server invalid layout errors

The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.

This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.

Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: mark deviceid invalid on filelayout DS connection errors

This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.

Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: pnfs_pageio_init_read() and init_write() need an extra argument

This is only when CONFIG_NFS_V4_1 isn't enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Acked-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: rewrite directio write to use async coalesce code

This also has the advantage that it allows directio to use pnfs.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: create struct nfs_commit_info

It is COMMIT that is handled the most differently between
the paged and direct paths. Create a structure that encapsulates
everything either path needs to know about the commit state.

We could use void to hide some of the layout driver stuff, but
Trond suggests pulling it out to ensure type checking, given the
huge changes being made, and the fact that it doesn't interfere
with other drivers.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: create completion structure to pass into page_init functions

Factors out the code that will need to change when directio
starts using these code paths. This will allow directio to use
the generic pagein and flush routines

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Fix more NFS debug related build warnings

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Use cond_resched_lock() to reduce latencies in the commit scans

Ensure that we conditionally drop the inode->i_lock when it is safe
to do so in the commit loops.
We do so after locking the nfs_page, but before removing it from the
commit list. We can then use list_safe_reset_next to recover the loop
after the lock is retaken.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Clean ups and bugfixes for the pNFS read/writeback/commit code

Move more pnfs-isms out of the generic commit code.

Bugfixes:

- filelayout_scan_commit_lists doesn't need to get/put the lseg.
In fact since it is run under the inode->i_lock, the lseg_put()
can deadlock.

- Ensure that we distinguish between what needs to be done for
commit-to-data server and what needs to be done for commit-to-MDS
using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
put_lseg() on a bucket for a struct nfs_page that got written
through the MDS.

- Fix a case where we were using list_del() on an nfs_page->wb_list
instead of list_del_init().

- filelayout_initiate_commit needs to call filelayout_commit_release
on error instead of the mds_ops->rpc_release(). Otherwise it won't
clear the commit lock.

Cleanups:

- Let the files layout manage the commit lists for the pNFS case.
Don't expose stuff like pnfs_choose_commit_list, and the fact
that the commit buckets hold references to the layout segment
in common code.

- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
into the pNFS layer from whence they came.

- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

NFS: remove nfs_inode radix tree

The radix tree is only being used to compile lists of reqs needing commit.
It is simpler to just put the reqs directly into a list.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Don't call nfs4_deviceid_purge_client() unless we're NFSv4.1

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs-obj: Must return layout on IO error

As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.

This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
because this code is never called outside of pnfs.c and pnfs IO
paths)

Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.

[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: recoalesce when ld read pagelist fails

For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: recoalesce when ld write pagelist fails

For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: make _set_lo_fail generic

file layout and block layout both use it to set mark layout io failure
bit. So make it generic.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Re-enable compilation of nfs with !CONFIG_NFS_V4 || !CONFIG_NFS_V4_1

Fix two recently introduced compile problems:

Fix a typo in fs/nfs/pnfs.h

Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in
struct nfs_server.

Reported-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnfsblock: call and parse getdevicelist

Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: Jim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: cleanup_layoutcommit

This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.

Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: add set-clear layoutdriver interface

To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.

[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: GETDEVICELIST

The block driver uses GETDEVICELIST

Signed-off-by: Andy Adamson <andros@netapp.com>
[pass struct nfs_server * to getdevicelist]
[get machince creds for getdevicelist]
[fix getdevicelist decode sizing]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: let layoutcommit handle a list of lseg

There can be multiple lseg per file, so layoutcommit should be
able to handle it.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: save layoutcommit cred at layout header init

No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: save layoutcommit lwb at layout header

No need to save it for every lseg.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Move the pnfs write code into pnfs.c

...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Move the pnfs read code into pnfs.c

...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: do not use deviceids after MDS clientid invalidation

Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: File layout only supports whole file layouts

Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Clean ups for the device id cache

The fact that the global device id cache holds a reference to the
nfs4_deviceid_node until it is invisible to rcu lookups implies that
we can always assume that the reference count is non-zero in
_find_get_deviceid.

Also clean up nfs4_put_deviceid_node and the removal of the device id
from the cache.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Add an initialisation callback for pNFS

Ensure that we always get a layout before setting up the i/o request.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Cleanup of the nfs_pageio code in preparation for a pnfs bugfix

We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.

This patch cleans up the existing callback methods before adding the
'initialisation' callback.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: fix umount of pnfs filesystems

Unmounting a pnfs filesystem hangs using filelayout and possibly others.
This fixes the use of the rcu protected node by making use of a new 'tmpnode'
for the temporary purge list. Also, the spinlock shouldn't be held when calling
synchronize_rcu().

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: use pnfs_generic_pg_test directly by layout driver

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: change pg_test return type to bool

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: unify pnfs_pageio_init functions

Use common code for pnfs_pageio_init_{read,write} and use
a common generic pg_test function.

Note that this function always assumes the the layout driver's
pg_test method is implemented.

[Fix BUG]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: encode_layoutcommit

Add a layout driver method to encode the layout type specific
opaque part of layout commit in-line in the xdr stream.

Currently, the pnfs-objects layout driver uses it to encode metadata hints
to the MDS and the blocks layout driver to commit provisionally allocated
extents to the file.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: encode_layoutreturn

Add a layout driver method to encode the layout type specific
opaque part of layout return in-line in the xdr stream.

Currently the pnfs-objects layout driver uses it to encode i/o error
information on LAYOUTRETURN.

Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for encode_layoutreturn]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: layoutret_on_setattr

With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.

Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: layoutreturn

NFSv4.1 LAYOUTRETURN implementation

Currently, does not support layout-type payload encoding.

Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: support for non-rpc layout drivers

Non-rpc layout driver such as for objects and blocks
implement their own I/O path and error handling logic.
Therefore bypass NFS-based error handling for these layout drivers.

[fix lseg ref-count bugs, and null de-refs]
[Fall out from: non-rpc layout drivers]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[get rid of PNFS_USE_RPC_CODE]
[get rid of __nfs4_write_done_cb]
[revert useless change in nfs4_write_done_cb]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: alloc and free layout_hdr layoutdriver methods

[gfp_flags]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: Use byte-range for cb_layoutrecall

Use recalled range to invalidate particular layout segments in the layout cache.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: Use byte-range for layoutget

Add offset and count parameters to pnfs_update_layout and use them to get
the layout in the pageio path.

Order cache layout segments in the following order:
* offset (ascending)
* length (descending)
* iomode (RW before READ)

Test byte range against the layout segment in use in pnfs_{read,write}_pg_test
so not to coalesce pages not using the same layout segment.

[fix lseg ordering]
[clean up pnfs_find_lseg lseg arg]
[remove unnecessary FIXME]
[fix ordering in pnfs_insert_layout]
[clean up pnfs_insert_layout]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: use layout driver in global device cache

pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server. Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: CB_NOTIFY_DEVICEID

Note: This functionlaity is incomplete as all layout segments referring to
the 'to be removed device id' need to be reaped, and all in flight I/O drained.

[use be32 res in nfs4_callback_devicenotify]
[use nfs_client to qualify deviceid for cb_notify_deviceid]
[use global deviceid cache for CB_NOTIFY_DEVICEID]
[refactor device cache _lookup_deviceid]
[refactor device cache _find_get_deviceid]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Bug in new global-device-cache code]
[layout_driver MUST set free_deviceid_node if using dev-cache]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: purge deviceid cache on nfs_free_client

Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.

[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: make deviceid cache global

Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

pnfs: resolve header dependency in pnfs.h

Some definitions in the header file depend on nfs_fs.h so pnfs.h can't
be included independently.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4.1: Ensure that layoutget uses the correct gfp modes

Currently, writebacks may end up recursing back into the filesystem due to
GFP_KERNEL direct reclaims in the pnfs subsystem.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Cleanup XDR parsing for LAYOUTGET, GETDEVICEINFO

changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
- not use vmap, which doesn't work on incoherent archs
- use xdr_stream parsing for all xdr

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 convert layoutcommit sync to boolean

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: layoutcommit

The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.

Only whole file layout support means that there is only one IOMODE_RW layout
segment.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: add generic layer hooks for pnfs COMMIT

We create three major hooks for the pnfs code.

pnfs_mark_request_commit() is called during writeback_done from
nfs_mark_request_commit, which gives the driver an opportunity to
claim it wants control over commiting a particular req.

pnfs_choose_commit_list() is called from nfs_scan_list
to choose which list a given req should be added to, based on
where we intend to send it for COMMIT. It is up to the driver
to have preallocated list headers for each destination it may need.

pnfs_commit_list() is how the driver actually takes control, it is
used instead of nfs_commit_list().

In order to pass information between the above functions, we create
a union in nfs_page to hold a lseg (which is possible because the req is
not on any list while in transition), and add some flags to indicate
if we need to use the pnfs code.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: implement generic pnfs layer write switch

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: trigger LAYOUTGET for writes

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 move deviceid cache to filelayout driver

No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: generic read

Separate the rpc run portion of nfs_read_rpcsetup into a new function
nfs_initiate_read that is called for normal NFS I/O.

Add a pNFS read_pagelist function that is called instead of nfs_intitate_read
for pNFS reads.

Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: shift pnfs_update_layout locations

Move the pnfs_update_layout call location to nfs_pageio_do_add_request().
Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach
it to each nfs_read_data so it can be sent to the layout driver.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: coelesce across layout stripes

Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: lseg refcounting

Prepare put_lseg and get_lseg to be called from the pNFS I/O code.
Pull common code from pnfs_lseg_locked to call from pnfs_lseg.
Inline pnfs_lseg_locked into it's only caller.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: layout roc code

A layout can request return-on-close. How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close. In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: add CB_LAYOUTRECALL handling

This is the heart of the wave 2 submission. Add the code to trigger
drain and forget of any afected layouts. In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored. This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: change lo refcounting to atomic_t

This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: serialize LAYOUTGET(openstateid)

We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed. This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: change how lsegs are removed from layout list

This is to prepare the way for sensible io draining. Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list. Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: change layout state seqlock to a spinlock

This prepares for future changes, where the layout state needs
to change atomically with several other variables. In particular,
it will need to know if lo->segs is empty, as we test that instead
of manipulating the NFS_LAYOUT_STATEID_SET bit. Moreover, the
layoutstateid is not really a read-mostly structure, as it is
written almost as often as it is read.

The behavior of pnfs_get_layout_stateid is also slightly changed, so that
it no longer changes the stateid. Its name is changed to +pnfs_choose_layoutget_stateid.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: add prefix to struct pnfs_layout_hdr fields

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

pnfs: add prefix to struct pnfs_layout_segment fields

While we are renaming all the fields, change lo->state to lo->plh_flags.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: Use more sensible names for 'initialize_mountpoint'

The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure

Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds
in the machinery to handle layout state and the deviceid cache. Note that
GETDEVICEINFO is not called directly by the generic layer. Instead it
is called by the drivers while parsing the LAYOUTGET opaque data in response
to an unknown device id embedded therein. RFC 5661 only encodes
device ids within the driver-specific opaque data.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: client needs to maintain list of inodes with active layouts

In particular, server reboot will invalidate all layouts.

Note that in order to have an active layout, we must get a successful response
from the server. To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return. Since the layout is never referenced
for io, this is not a problem.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: create and destroy inode's layout cache

At the start of the io paths, try to grab the relevant layout
information. This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1: pnfs: full mount/umount infrastructure

Allow a module implementing a layout type to register, and
have its mount/umount routines called for filesystems that
the server declares support it.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: set layout driver

Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.

In this patch, a stub is used that always returns "no driver found".

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>