pidfs: remove config option

As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.

For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.

If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.

Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.

Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.

Tested on both 32 and 64bit including error injection.

Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: have CONFIG_HUGETLBFS select CONFIG_PADATA

Allow hugetlb use padata_do_multithreaded for parallel initialization.
Select CONFIG_PADATA in this case.

Link: https://lkml.kernel.org/r/20240222140422.393911-7-gang.li@linux.dev
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dax: check for data cache aliasing at runtime

Replace the following fs/Kconfig:FS_DAX dependency:

depends on !(ARM || MIPS || SPARC)

By a runtime check within alloc_dax(). This runtime check returns
ERR_PTR(-EOPNOTSUPP) if the @ops parameter is non-NULL (which means
the kernel is using an aliased mapping) on an architecture which
has data cache aliasing.

Change the return value from NULL to PTR_ERR(-EOPNOTSUPP) for
CONFIG_DAX=n for consistency.

This is done in preparation for using cpu_dcache_is_aliasing() in a
following change which will properly support architectures which detect
data cache aliasing at runtime.

Link: https://lkml.kernel.org/r/20240215144633.96437-8-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pidfd: add pidfs

This moves pidfds from the anonymous inode infrastructure to a tiny
pseudo filesystem. This has been on my todo for quite a while as it will
unblock further work that we weren't able to do simply because of the
very justified limitations of anonymous inodes. Moving pidfds to a tiny
pseudo filesystem allows:

* statx() on pidfds becomes useful for the first time.
* pidfds can be compared simply via statx() and then comparing inode
numbers.
* pidfds have unique inode numbers for the system lifetime.
* struct pid is now stashed in inode->i_private instead of
file->private_data. This means it is now possible to introduce
concepts that operate on a process once all file descriptors have been
closed. A concrete example is kill-on-last-close.
* file->private_data is freed up for per-file options for pidfds.
* Each struct pid will refer to a different inode but the same struct
pid will refer to the same inode if it's opened multiple times. In
contrast to now where each struct pid refers to the same inode. Even
if we were to move to anon_inode_create_getfile() which creates new
inodes we'd still be associating the same struct pid with multiple
different inodes.

The tiny pseudo filesystem is not visible anywhere in userspace exactly
like e.g., pipefs and sockfs. There's no lookup, there's no complex
inode operations, nothing. Dentries and inodes are always deleted when
the last pidfd is closed.

We allocate a new inode for each struct pid and we reuse that inode for
all pidfds. We use iget_locked() to find that inode again based on the
inode number which isn't recycled. We allocate a new dentry for each
pidfd that uses the same inode. That is similar to anonymous inodes
which reuse the same inode for thousands of dentries. For pidfds we're
talking way less than that. There usually won't be a lot of concurrent
openers of the same struct pid. They can probably often be counted on
two hands. I know that systemd does use separate pidfd for the same
struct pid for various complex process tracking issues. So I think with
that things actually become way simpler. Especially because we don't
have to care about lookup. Dentries and inodes continue to be always
deleted.

The code is entirely optional and fairly small. If it's not selected we
fallback to anonymous inodes. Heavily inspired by nsfs which uses a
similar stashing mechanism just for namespaces.

Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-2-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

fs: Remove NTFS classic

The replacement, NTFS3, was merged over two years ago. It is now time to
remove the original from the tree as it is the last user of several APIs,
and it is not worth changing.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240115072025.2071931-1-willy@infradead.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

netfs, fscache: Move fs/fscache/* into fs/netfs/

There's a problem with dependencies between netfslib and fscache as each
wants to access some functions of the other. Deal with this by moving
fs/fscache/* into fs/netfs/ and renaming those files to begin with
"fscache-".

For the moment, the moved files are changed as little as possible and an
fscache module is still built. A subsequent patch will integrate them.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com

fs/Kconfig: make hugetlbfs a menuconfig

Hugetlb vmemmap default option (HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON)
is a sub-option to hugetlbfs, but it shows in the same level as hugetlbfs
itself, under "Pesudo filesystems".

Make the vmemmap option a sub-option to hugetlbfs, by changing hugetlbfs
into a menuconfig. When moving it, fix a typo 'v' spot by Randy.

Link: https://lkml.kernel.org/r/20231124151902.1075697-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: prepare for stackable filesystems backing file helpers

In preparation for factoring out some backing file io helpers from
overlayfs, move backing_file_open() into a new file fs/backing-file.c
and header.

Add a MAINTAINERS entry for stackable filesystems and add a Kconfig
FS_STACK which stackable filesystems need to select.

For now, the backing_file struct, the backing_file alloc/free functions
and the backing_file_real_path() accessor remain internal to file_table.c.
We may change that in the future.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>

mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI

After commit a08c7193e4f1 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes. This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI. The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.

Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arch: Remove Itanium (IA-64) architecture

The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

bcachefs: Initial commit

Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.

Website: https://bcachefs.org

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

mm/vmemmap optimization: split hugetlb and devdax vmemmap optimization

Arm disabled hugetlb vmemmap optimization [1] because hugetlb vmemmap
optimization includes an update of both the permissions (writeable to
read-only) and the output address (pfn) of the vmemmap ptes. That is not
supported without unmapping of pte(marking it invalid) by some
architectures.

With DAX vmemmap optimization we don't require such pte updates and
architectures can enable DAX vmemmap optimization while having hugetlb
vmemmap optimization disabled. Hence split DAX optimization support into
a different config.

s390, loongarch and riscv don't have devdax support. So the DAX config is
not enabled for them. With this change, arm64 should be able to select
DAX optimization

[1] commit 060a2c92d1b6 ("arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP")

Link: https://lkml.kernel.org/r/20230724190759.483013-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: make MEMFD_CREATE into a selectable config option

The memfd_create() syscall, enabled by CONFIG_MEMFD_CREATE, is useful on
its own even when not required by CONFIG_TMPFS or CONFIG_HUGETLBFS.

Split it into its own proper bool option that can be enabled by users.

Move that option into mm/ where the code itself also lies. Also add
"select" statements to CONFIG_TMPFS and CONFIG_HUGETLBFS so they
automatically enable CONFIG_MEMFD_CREATE as before.

Link: https://lkml.kernel.org/r/20230630-config-memfd-v1-1-9acc3ae38b5a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Zhangjin Wu <falcon@tinylab.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: add CONFIG_BUFFER_HEAD

Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.

For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.

Otherwise this is just Kconfig and ifdef changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

tmpfs,xattr: enable limited user extended attributes

Enable "user." extended attributes on tmpfs, limiting them by tracking
the space they occupy, and deducting that space from the limited ispace
(unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited).

tmpfs inodes and simple xattrs are both unswappable, and have to be in
lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate
for xattrs, without any need for a further mount option.

Add simple_xattr_space() to give approximate but deterministic estimate
of the space taken up by each xattr: with simple_xattrs_free() outputting
the space freed if required (but kernfs and even some tmpfs usages do not
require that, so don't waste time on strlen'ing if not needed).

Security and trusted xattrs were already supported: for consistency and
simplicity, account them from the same pool; though there's a small risk
that a tmpfs with enough space before would now be considered too small.

When extended attributes are used, "df -i" does show more IUsed and less
IFree than can be explained by the inodes: document that (manpage later).

xfstests tests/generic which were not run on tmpfs before but now pass:
020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728
with no new failures.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

shmem: prepare shmem quota infrastructure

Add new shmem quota format, its quota_format_ops together with
dquot_operations

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-5-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

smb: move client and server files to common directory fs/smb

Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:

fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

mm/hugetlb_vmemmap: rename ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP

Now we use ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP config option to
indicate devdax and hugetlb vmemmap optimization support. Hence rename
that to a generic ARCH_WANT_OPTIMIZE_VMEMMAP

Link: https://lkml.kernel.org/r/20230412050025.84346-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: build the legacy direct I/O code conditionally

Add a new LEGACY_DIRECT_IO config symbol that is only selected by the
file systems that still use the legacy blockdev_direct_IO code, so that
kernels without support for those file systems don't need to build the
code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230125065839.191256-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

hugetlb: make hugetlb depends on SYSFS or SYSCTL

If CONFIG_SYSFS and CONFIG_SYSCTL are both undefined, hugetlb doesn't work
now as there's no way to set max huge pages. Make sure at least one of the
above configs is defined to make hugetlb works as expected.

Link: https://lkml.kernel.org/r/20220901120030.63318-11-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: introduce the name HVO

It it inconvenient to mention the feature of optimizing vmemmap pages
associated with HugeTLB pages when communicating with others since there
is no specific or abbreviated name for it when it is first introduced.
Let us give it a name HVO (HugeTLB Vmemmap Optimization) from now.

This commit also updates the document about "hugetlb_free_vmemmap" by the
way discussed in thread [1].

Link: https://lore.kernel.org/all/21aae898-d54d-cc4b-a11f-1bb7fddcfffa@redhat.com/ [1]
Link: https://lkml.kernel.org/r/20220628092235.91270-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*

The word of "free" is not expressive enough to express the feature of
optimizing vmemmap pages associated with each HugeTLB, rename this keywork
to "optimize". In this patch , cheanup configs to make code more
expressive.

Link: https://lkml.kernel.org/r/20220404074652.68024-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: introduce ARCH_WANT_HUGETLB_PAGE_FREE_VMEMMAP

The feature of minimizing overhead of struct page associated with each
HugeTLB page is implemented on x86_64, however, the infrastructure of this
feature is already there, we could easily enable it for other
architectures. Introduce ARCH_WANT_HUGETLB_PAGE_FREE_VMEMMAP for other
architectures to be easily enabled. Just select this config if they want
to enable this feature.

Link: https://lkml.kernel.org/r/20220331065640.5777-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Tested-by: Barry Song <baohua@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

NFSD: Remove CONFIG_NFSD_V3

Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.

However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.

This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.

The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

fsdax: depend on ZONE_DEVICE || FS_DAX_LIMITED

Add a depends on ZONE_DEVICE support or the s390-specific limited DAX
support, as one of the two is required at runtime for fsdax code to
actually work.

Link: https://lkml.kernel.org/r/20220210072828.2930359-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

mm: remove the extra ZONE_DEVICE struct page refcount

ZONE_DEVICE struct pages have an extra reference count that complicates
the code for put_page() and several places in the kernel that need to
check the reference count to see that a page is not being used (gup,
compaction, migration, etc.). Clean up the code so the reference count
doesn't need to be treated specially for ZONE_DEVICE pages.

Note that this excludes the special idle page wakeup for fsdax pages,
which still happens at refcount 1. This is a separate issue and will
be sorted out later. Given that only fsdax pages require the
notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig
symbol can go away and be replaced with a FS_DAX check for this hook
in the put_page fastpath.

Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>.

Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

ksmbd: add support for key exchange

When mounting cifs client, can see the following warning message.

CIFS: decode_ntlmssp_challenge: authentication has been weakened as server
does not support key exchange

To remove this warning message, Add support for key exchange feature to
ksmbd. This patch decrypts 16-byte ciphertext value sent by the client
using RC4 with session key. The decrypted value is the recovered secondary
key that will use instead of the session key for signing and sealing.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

cachefiles: Introduce rewritten driver

Introduce basic skeleton of the rewritten cachefiles driver including
config options so that it can be enabled for compilation.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819622766.215744.9108359326983195047.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906923341.143852.3856498104256721447.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967130320.1823006.15791456613198441566.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021528993.640689.9069695476048171884.stgit@warthog.procyon.org.uk/ # v4

cachefiles: Delete the cachefiles driver pending rewrite

Delete the code from the cachefiles driver to make it easier to rewrite and
resubmit in a logical manner.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819577641.215744.12718114397770666596.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906883770.143852.4149714614981373410.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967076066.1823006.7175712134577687753.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021483619.640689.7586546280515844702.stgit@warthog.procyon.org.uk/ # v4

fsdax: don't require CONFIG_BLOCK

The file system DAX code now does not require the block code. So allow
building a kernel with fuse DAX but not block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-30-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

iomap: build the block based code conditionally

Only build the block based iomap code if CONFIG_BLOCK is set. Currently
that is always the case, but it will change soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-29-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

cifs: rename cifs_common to smbfs_common

As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

hugetlbfs: s390 is always 64bit

No need to check for 64BIT. While at it, let's just select
ARCH_SUPPORTS_HUGETLBFS from arch/s390/Kconfig.

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210908154506.20764-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

fsdax: improve the FS_DAX Kconfig description and help text

Rename the main option text to clarify it is for file system access,
and add a bit of text that explains how to actually switch a nvdimm
to a fsdax capable state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210826135510.6293-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

fs/ntfs3: Add NTFS3 in fs/Kconfig and fs/Makefile

This adds NTFS3 in fs/Kconfig and fs/Makefile

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

cifs: fork arc4 and create a separate module for it for cifs and other users

We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd: move fs/cifsd to fs/ksmbd

Move fs/cifsd to fs/ksmbd and rename the remaining cifsd name to ksmbd.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifsd: add Kconfig and Makefile

This adds the Kconfig and Makefile for cifsd.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

fs: remove mandatory file locking support

We added CONFIG_MANDATORY_FILE_LOCKING in 2015, and soon after turned it
off in Fedora and RHEL8. Several other distros have followed suit.

I've heard of one problem in all that time: Someone migrated from an
older distro that supported "-o mand" to one that didn't, and the host
had a fstab entry with "mand" in it which broke on reboot. They didn't
actually _use_ mandatory locking so they just removed the mount option
and moved on.

This patch rips out mandatory locking support wholesale from the kernel,
along with the Kconfig option and the Documentation file. It also
changes the mount code to ignore the "mand" mount option instead of
erroring out, and to throw a big, ugly warning.

Signed-off-by: Jeff Layton <jlayton@kernel.org>

mm: hugetlb: introduce CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON

When using HUGETLB_PAGE_FREE_VMEMMAP, the freeing unused vmemmap pages
associated with each HugeTLB page is default off. Now the vmemmap is PMD
mapped. So there is no side effect when this feature is enabled with no
HugeTLB pages in the system. Someone may want to enable this feature in
the compiler time instead of using boot command line. So add a config to
make it default on when someone do not want to enable it via command line.

Link: https://lkml.kernel.org/r/20210616094915.34432-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Chen Huang <chenhuang5@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hugetlb: introduce a new config HUGETLB_PAGE_FREE_VMEMMAP

The option HUGETLB_PAGE_FREE_VMEMMAP allows for the freeing of some
vmemmap pages associated with pre-allocated HugeTLB pages. For example,
on X86_64 6 vmemmap pages of size 4KB each can be saved for each 2MB
HugeTLB page. 4094 vmemmap pages of size 4KB each can be saved for each
1GB HugeTLB page.

When a HugeTLB page is allocated or freed, the vmemmap array representing
the range associated with the page will need to be remapped. When a page
is allocated, vmemmap pages are freed after remapping. When a page is
freed, previously discarded vmemmap pages must be allocated before
remapping.

The config option is introduced early so that supporting code can be
written to depend on the option. The initial version of the code only
provides support for x86-64.

If config HAVE_BOOTMEM_INFO_NODE is enabled, the freeing vmemmap page code
denpend on it to free vmemmap pages. Otherwise, just use
free_reserved_page() to free vmemmmap pages. The routine
register_page_bootmem_info() is used to register bootmem info. Therefore,
make sure register_page_bootmem_info is enabled if
HUGETLB_PAGE_FREE_VMEMMAP is defined.

Link: https://lkml.kernel.org/r/20210510030027.56044-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Chen Huang <chenhuang5@huawei.com>
Tested-by: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.

The client SSC code should not depend on any of the CONFIG_NFSD config.
This patch removes all CONFIG_NFSD from NFSv4.2 client SSC code and
simplifies the config of CONFIG_NFS_V4_2_SSC_HELPER, NFSD_V4_2_INTER_SSC.

Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

mm: generalize SYS_SUPPORTS_HUGETLBFS (rename as ARCH_SUPPORTS_HUGETLBFS)

SYS_SUPPORTS_HUGETLBFS config has duplicate definitions on platforms
that subscribe it. Instead, just make it a generic option which can be
selected on applicable platforms.

Also rename it as ARCH_SUPPORTS_HUGETLBFS instead. This reduces code
duplication and makes it cleaner.

Link: https://lkml.kernel.org/r/1617259448-22529-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [riscv]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

netfs: Provide readahead and readpage netfs helpers

Add a pair of helper functions:

(*) netfs_readahead()
(*) netfs_readpage()

to do the work of handling a readahead or a readpage, where the page(s)
that form part of the request may be split between the local cache, the
server or just require clearing, and may be single pages and transparent
huge pages. This is all handled within the helper.

Note that while both will read from the cache if there is data present,
only netfs_readahead() will expand the request beyond what it was asked to
do, and only netfs_readahead() will write back to the cache.

netfs_readpage(), on the other hand, is synchronous and only fetches the
page (which might be a THP) it is asked for.

The netfs gives the helper parameters from the VM, the cache cookie it
wants to use (or NULL) and a table of operations (only one of which is
mandatory):

(*) expand_readahead() [optional]

Called to allow the netfs to request an expansion of a readahead
request to meet its own alignment requirements. This is done by
changing rreq->start and rreq->len.

(*) clamp_length() [optional]

Called to allow the netfs to cut down a subrequest to meet its own
boundary requirements. If it does this, the helper will generate
additional subrequests until the full request is satisfied.

(*) is_still_valid() [optional]

Called to find out if the data just read from the cache has been
invalidated and must be reread from the server.

(*) issue_op() [required]

Called to ask the netfs to issue a read to the server. The subrequest
describes the read. The read request holds information about the file
being accessed.

The netfs can cache information in rreq->netfs_priv.

Upon completion, the netfs should set the error, transferred and can
also set FSCACHE_SREQ_CLEAR_TAIL and then call
fscache_subreq_terminated().

(*) done() [optional]

Called after the pages have been unlocked. The read request is still
pinning the file and mapping and may still be pinning pages with
PG_fscache. rreq->error indicates any error that has been
accumulated.

(*) cleanup() [optional]

Called when the helper is disposing of a finished read request. This
allows the netfs to clear rreq->netfs_priv.

Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built
even if CONFIG_FSCACHE=n and in this case much of it should be optimised
away, allowing the filesystem to use it even when caching is disabled.

Changes:
v5:
- Comment why netfs_readahead() is putting pages[2].
- Use page_file_mapping() rather than page->mapping[2].
- Use page_index() rather than page->index[2].
- Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an
appropriate ref too[4].

v4:
- Folded in a kerneldoc comment fix.
- Folded in a fix for the error handling in the case that ENOMEM occurs.
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6

s390,alpha: make TMPFS_INODE64 available again

Both s390 and alpha have been switched to 64-bit ino_t with
commit 96c0a6a72d18 ("s390,alpha: switch to 64-bit ino_t").
Therefore enable TMPFS_INODE64 for both architectures again.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Link: https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

NFSv4_2: SSC helper should use its own config.

Currently NFSv4_2 SSC helper, nfs_ssc, incorrectly uses GRACE_PERIOD
as its config. Fix by adding new config NFS_V4_2_SSC_HELPER which
depends on NFS_V4_2 and is automatically selected when NFSD_V4 is
enabled. Also removed the file name from a comment in nfs_ssc.c.

Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha

As with s390, alpha is a 64-bit architecture with a 32-bit ino_t. With
CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and
display "inode64" in the mount options, whereas passing "inode64" in the
mount options will fail. This leads to erroneous behaviours such as
this:

# mkdir mnt
# mount -t tmpfs nodev mnt
# mount -o remount,rw mnt
mount: /home/ubuntu/mnt: mount point not mounted or bad option.

Prevent CONFIG_TMPFS_INODE64 from being selected on alpha.

Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com
Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: disallow CONFIG_TMPFS_INODE64 on s390

Currently there is an assumption in tmpfs that 64-bit architectures also
have a 64-bit ino_t. This is not true on s390 which has a 32-bit ino_t.
With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers
and display "inode64" in the mount options, but passing the "inode64"
mount option will fail. This leads to the following behavior:

# mkdir mnt
# mount -t tmpfs nodev mnt
# mount -o remount,rw mnt
mount: /home/ubuntu/mnt: mount point not mounted or bad option.

As mount sees "inode64" in the mount options and thus passes it in the
options for the remount.

So prevent CONFIG_TMPFS_INODE64 from being selected on s390.

Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com
Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: support 64-bit inums per-sb

The default is still set to inode32 for backwards compatibility, but
system administrators can opt in to the new 64-bit inode numbers by
either:

1. Passing inode64 on the command line when mounting, or
2. Configuring the kernel with CONFIG_TMPFS_INODE64=y

The inode64 and inode32 names are used based on existing precedent from
XFS.

[hughd@google.com: Kconfig fixes]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008011928010.13320@eggly.anvils

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/8b23758d0c66b5e2263e08baf9c4b6a7565cbd8f.1594661218.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

docs: filesystems: fix renamed references

Some filesystem references got broken by a previous patch
series I submitted. Address those.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

exfat: add Kconfig and Makefile

This adds the Kconfig and Makefile for exfat.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: Add VirtualBox guest shared folder (vboxsf) support

VirtualBox hosts can share folders with guests, this commit adds a
VFS driver implementing the Linux-guest side of this, allowing folders
exported by the host to be mounted under Linux.

This driver depends on the guest <-> host IPC functions exported by
the vboxguest driver.

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fs: New zonefs file system

zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).

As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.

Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.

The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
under a common sub-directory:
* For conventional zones, the sub-directory "cnv" is used.
* For sequential write zones, the sub-directory "seq" is used.
These two directories are the only directories that exist in zonefs.
Users cannot create other directories and cannot rename nor delete
the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
pointer position relative to the zone start sector. Truncating these
files is allowed only down to 0, in which case, the zone is reset to
rewind the zone write pointer position to the start of the zone, or
up to the zone size, in which case the file's zone is transitioned
to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
file zone size. Any access exceeding the zone size is failed with
the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
that can be issued to conventional zone files. Buffered, direct and
mmap read & write operations are accepted. For sequential zone files,
there are no restrictions on read operations, but all write
operations must be direct IO append writes. mmap write of sequential
files is not allowed.

Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
zones can be aggregated into a single larger file instead of the
default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
(root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
changed.

The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:

git@github.com:damien-lemoal/zonefs-tools.git.

zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.

Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.

$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq

The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).

$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0

This aggregated conventional zone file can be used as a regular file.

$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data

The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.

$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355

For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.

$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s

$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0

The written file can be truncated to the zone size, preventing any
further write operation.

$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0

Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.

$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0

Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.

$ stat /mnt/seq/0
File: /mnt/seq/0
Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
Device: 870h/2160d Inode: 50431 Links: 1
Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
Birth: -

The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.

This code contains contributions from:
* Johannes Thumshirn <jthumshirn@suse.de>,
* Darrick J. Wong <darrick.wong@oracle.com>,
* Christoph Hellwig <hch@lst.de>,
* Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and
* Ting Yao <tingyao@hust.edu.cn>.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

io-wq: small threadpool implementation for io_uring

This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:

- We can assign memory context smarter and more persistently if we
manage the life time of threads.

- We can drop various work-arounds we have in io_uring, like the
async_list.

- We can implement hashed work insertion, to manage concurrency of
buffered writes without needing a) an extra workqueue, or b)
needlessly making the concurrency of said workqueue very low
which hurts performance of multiple buffered file writers.

- We can implement cancel through signals, for cancelling
interruptible work like read/write (or send/recv) to/from sockets.

- We need the above cancel for being able to assign and use file tables
from a process.

- We can implement a more thorough cancel operation in general.

- We need it to move towards a syslet/threadlet model for even faster
async execution. For that we need to take ownership of the used
threads.

This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.

io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

erofs: move erofs out of staging

EROFS filesystem has been merged into linux-staging for a year.

EROFS is designed to be a better solution of saving extra storage
space with guaranteed end-to-end performance for read-only files
with the help of reduced metadata, fixed-sized output compression
and decompression inplace technologies.

In the past year, EROFS was greatly improved by many people as
a staging driver, self-tested, betaed by a large number of our
internal users, successfully applied to almost all in-service
HUAWEI smartphones as the part of EMUI 9.1 and proven to be stable
enough to be moved out of staging.

EROFS is a self-contained filesystem driver. Although there are
still some TODOs to be more generic, we have a dedicated team
actively keeping on working on EROFS in order to make it better
with the evolution of Linux kernel as the other in-kernel filesystems.

As Pavel suggested, it's better to do as one commit since git
can do moves and all histories will be saved in this way.

Let's promote it from staging and enhance it more actively as
a "real" part of kernel for more wider scenarios!

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Pavel Machek <pavel@denx.de>
Cc: David Sterba <dsterba@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J . Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Richard Weinberger <richard@nod.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Fang Wei <fangwei1@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190822213659.5501-1-hsiangkao@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs-verity: add Kconfig and the helper functions for hashing

Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing. To start, only
SHA-256 is supported, but other hash algorithms can easily be added.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>

fs: VALIDATE_FS_PARSER should default to n

CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane. It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.

Make sure it is not enabled by default in the final release of v5.1.

Fixes: 31d921c7fb969172 ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unicode: introduce UTF-8 character database

The decomposition and casefolding of UTF-8 characters are described in a
prefix tree in utf8data.h, which is a generate from the Unicode
Character Database (UCD), published by the Unicode Consortium, and
should not be edited by hand. The structures in utf8data.h are meant to
be used for lookup operations by the unicode subsystem, when decoding a
utf-8 string.

mkutf8data.c is the source for a program that generates utf8data.h. It
was written by Olaf Weber from SGI and originally proposed to be merged
into Linux in 2014. The original proposal performed the compatibility
decomposition, NFKD, but the current version was modified by me to do
canonical decomposition, NFD, as suggested by the community. The
changes from the original submission are:

* Rebase to mainline.
* Fix out-of-tree-build.
* Update makefile to build 11.0.0 ucd files.
* drop references to xfs.
* Convert NFKD to NFD.
* Merge back robustness fixes from original patch. Requested by
Dave Chinner.

The original submission is archived at:

<https://linux-xfs.oss.sgi.narkive.com/Xx10wjVY/rfc-unicode-utf-8-support-for-xfs>

The utf8data.h file can be regenerated using the instructions in
fs/unicode/README.utf8data.

- Notes on the update from 8.0.0 to 11.0:

The structure of the ucd files and special cases have not experienced
any changes between versions 8.0.0 and 11.0.0. 8.0.0 saw the addition
of Cherokee LC characters, which is an interesting case for
case-folding. The update is accompanied by new tests on the test_ucd
module to catch specific cases. No changes to mkutf8data script were
required for the updates.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

vfs: Add configuration parser helpers

Because the new API passes in key,value parameters, match_token() cannot be
used with it. Instead, provide three new helpers to aid with parsing:

(1) fs_parse(). This takes a parameter and a simple static description of
all the parameters and maps the key name to an ID. It returns 1 on a
match, 0 on no match if unknowns should be ignored and some other
negative error code on a parse error.

The parameter description includes a list of key names to IDs, desired
parameter types and a list of enumeration name -> ID mappings.

[!] Note that for the moment I've required that the key->ID mapping
array is expected to be sorted and unterminated. The size of the
array is noted in the fsconfig_parser struct. This allows me to use
bsearch(), but I'm not sure any performance gain is worth the hassle
of requiring people to keep the array sorted.

The parameter type array is sized according to the number of parameter
IDs and is indexed directly. The optional enum mapping array is an
unterminated, unsorted list and the size goes into the fsconfig_parser
struct.

The function can do some additional things:

(a) If it's not ambiguous and no value is given, the prefix "no" on
a key name is permitted to indicate that the parameter should
be considered negatory.

(b) If the desired type is a single simple integer, it will perform
an appropriate conversion and store the result in a union in
the parse result.

(c) If the desired type is an enumeration, {key ID, name} will be
looked up in the enumeration list and the matching value will
be stored in the parse result union.

(d) Optionally generate an error if the key is unrecognised.

This is called something like:

enum rdt_param {
Opt_cdp,
Opt_cdpl2,
Opt_mba_mpbs,
nr__rdt_params
};

const struct fs_parameter_spec rdt_param_specs[nr__rdt_params] = {
[Opt_cdp] = { fs_param_is_bool },
[Opt_cdpl2] = { fs_param_is_bool },
[Opt_mba_mpbs] = { fs_param_is_bool },
};

const const char *const rdt_param_keys[nr__rdt_params] = {
[Opt_cdp] = "cdp",
[Opt_cdpl2] = "cdpl2",
[Opt_mba_mpbs] = "mba_mbps",
};

const struct fs_parameter_description rdt_parser = {
.name = "rdt",
.nr_params = nr__rdt_params,
.keys = rdt_param_keys,
.specs = rdt_param_specs,
.no_source = true,
};

int rdt_parse_param(struct fs_context *fc,
struct fs_parameter *param)
{
struct fs_parse_result parse;
struct rdt_fs_context *ctx = rdt_fc2context(fc);
int ret;

ret = fs_parse(fc, &rdt_parser, param, &parse);
if (ret < 0)
return ret;

switch (parse.key) {
case Opt_cdp:
ctx->enable_cdpl3 = true;
return 0;
case Opt_cdpl2:
ctx->enable_cdpl2 = true;
return 0;
case Opt_mba_mpbs:
ctx->enable_mba_mbps = true;
return 0;
}

return -EINVAL;
}

(2) fs_lookup_param(). This takes a { dirfd, path, LOOKUP_EMPTY? } or
string value and performs an appropriate path lookup to convert it
into a path object, which it will then return.

If the desired type was a blockdev, the type of the looked up inode
will be checked to make sure it is one.

This can be used like:

enum foo_param {
Opt_source,
nr__foo_params
};

const struct fs_parameter_spec foo_param_specs[nr__foo_params] = {
[Opt_source] = { fs_param_is_blockdev },
};

const char *char foo_param_keys[nr__foo_params] = {
[Opt_source] = "source",
};

const struct constant_table foo_param_alt_keys[] = {
{ "device", Opt_source },
};

const struct fs_parameter_description foo_parser = {
.name = "foo",
.nr_params = nr__foo_params,
.nr_alt_keys = ARRAY_SIZE(foo_param_alt_keys),
.keys = foo_param_keys,
.alt_keys = foo_param_alt_keys,
.specs = foo_param_specs,
};

int foo_parse_param(struct fs_context *fc,
struct fs_parameter *param)
{
struct fs_parse_result parse;
struct foo_fs_context *ctx = foo_fc2context(fc);
int ret;

ret = fs_parse(fc, &foo_parser, param, &parse);
if (ret < 0)
return ret;

switch (parse.key) {
case Opt_source:
return fs_lookup_param(fc, &foo_parser, param,
&parse, &ctx->source);
default:
return -EINVAL;
}
}

(3) lookup_constant(). This takes a table of named constants and looks up
the given name within it. The table is expected to be sorted such
that bsearch() be used upon it.

Possibly I should require the table be terminated and just use a
for-loop to scan it instead of using bsearch() to reduce hassle.

Tables look something like:

static const struct constant_table bool_names[] = {
{ "0", false },
{ "1", true },
{ "false", false },
{ "no", false },
{ "true", true },
{ "yes", true },
};

and a lookup is done with something like:

b = lookup_constant(bool_names, param->string, -1);

Additionally, optional validation routines for the parameter description
are provided that can be enabled at compile time. A later patch will
invoke these when a filesystem is registered.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

scsi: fs: remove exofs

This was an example for using the SCSI OSD protocol, which we're trying
to remove.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

autofs: remove left-over autofs4 stubs

There's no need to retain the fs/autofs4 directory for backward
compatibility.

Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias
for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4
remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working
but this shouldn't be used in automation scripts rather than
modprobe(8).

There were some comments about things to look out for with the module
rename in the fs/autofs4/Kconfig that is removed by this patch, see the
commit patch if you are interested.

One potential problem with this change is that when the
fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS
entries will be removed from the kernel config, resulting in no autofs
file system being built if there is no AUTOFS_FS entry also.

This would have also happened if the fs/autofs4 remnants had remained
and is most likely to be a problem with automated builds.

Please check your build configurations before the removal which will
occur after the next couple of kernel releases.

Acked-by: Ian Kent <raven@themaw.net>
[ With edits and commit message from Ian Kent ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: create autofs Kconfig and Makefile

Create Makefile and Kconfig for autofs module.

[raven@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS]
Link: http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.stgit@pluto.themaw.net
Link: http://lkml.kernel.org/r/152626705591.28589.356365986974038383.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: restructure memfd code

With the addition of memfd hugetlbfs support, we now have the situation
where memfd depends on TMPFS -or- HUGETLBFS. Previously, memfd was only
supported on tmpfs, so it made sense that the code resided in shmem.c.
In the current code, memfd is only functional if TMPFS is defined. If
HUGETLFS is defined and TMPFS is not defined, then memfd functionality
will not be available for hugetlbfs. This does not cause BUGs, just a
lack of potentially desired functionality.

Code is restructured in the following way:
- include/linux/memfd.h is a new file containing memfd specific
definitions previously contained in shmem_fs.h.
- mm/memfd.c is a new file containing memfd specific code previously
contained in shmem.c.
- memfd specific code is removed from shmem_fs.h and shmem.c.
- A new config option MEMFD_CREATE is added that is defined if TMPFS
or HUGETLBFS is defined.

No functional changes are made to the code: restructuring only.

Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS

In preparation for fixing dax-dma-vs-unmap issues, filesystems need to
be able to rely on the fact that they will get wakeups on dev_pagemap
page-idle events. Introduce MEMORY_DEVICE_FS_DAX and
generic_dax_page_free() as common indicator / infrastructure for dax
filesytems to require. With this change there are no users of the
MEMORY_DEVICE_HOST designation, so remove it.

The HMM sub-system extended dev_pagemap to arrange a callback when a
dev_pagemap managed page is freed. Since a dev_pagemap page is free /
idle when its reference count is 1 it requires an additional branch to
check the page-type at put_page() time. Given put_page() is a hot-path
we do not want to incur that check if HMM is not in use, so a static
branch is used to avoid that overhead when not necessary.

Now, the FS_DAX implementation wants to reuse this mechanism for
receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific
static-key into a generic mechanism that either HMM or FS_DAX code paths
can enable.

For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support,
care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure.
However, we still need to support FS_DAX in the FS_DAX_LIMITED case
implemented by the s390/dcssblk driver.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

docs/admin-guide/mm: start moving here files from Documentation/vm

Several documents in Documentation/vm fit quite well into the "admin/user
guide" category. The documents that don't overload the reader with lots of
implementation details and provide coherent description of certain feature
can be moved to Documentation/admin-guide/mm.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs/vm: rename documentation files to .rst

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

dax: require 'struct page' by default for filesystem dax

If a dax buffer from a device that does not map pages is passed to
read(2) or write(2) as a target for direct-I/O it triggers SIGBUS. If
gdb attempts to examine the contents of a dax buffer from a device that
does not map pages it triggers SIGBUS. If fork(2) is called on a process
with a dax mapping from a device that does not map pages it triggers
SIGBUS. 'struct page' is required otherwise several kernel code paths
break in surprising ways. Disable filesystem-dax on devices that do not
map pages.

In addition to needing pfn_to_page() to be valid we also require devmap
pages. We need this to detect dax pages in the get_user_pages_fast()
path and so that we can stop managing the VM_MIXEDMAP flag. For DAX
drivers that have not supported get_user_pages() to date we allow them
to opt-in to supporting DAX with the CONFIG_FS_DAX_LIMITED configuration
option which requires ->direct_access() to return pfn_t_special() pfns.
This leaves DAX support in brd disabled and scheduled for removal.

Note that when the initial dax support was being merged a few years back
there was concern that struct page was unsuitable for use with next
generation persistent memory devices. The theoretical concern was that
struct page access, being such a hotly used data structure in the
kernel, would lead to media wear out. While that was a reasonable
conservative starting position it has not held true in practice. We have
long since committed to using devm_memremap_pages() to support higher
order kernel functionality that needs get_user_pages() and
pfn_to_page().


Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at

This link is replicated in most filesystems' config stanzas. Referring
to an archived version of that site is pointless as it mostly deals with
patches; user documentation is available elsewhere.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

ncpfs: move net/ncpfs to drivers/staging/ncpfs

The Netware Core Protocol is a file system that talks to
Netware clients over IPX. Since IPX has been dead for many years
move the file system into staging for eventual interment.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/Kconfig: kill CONFIG_PERCPU_RWSEM some more

As of commit bf3eac84c42d ("percpu-rwsem: kill CONFIG_PERCPU_RWSEM") we
unconditionally build pcpu-rwsems. Remove a leftover in for
FILE_LOCKING.

Link: http://lkml.kernel.org/r/20170518180115.2794-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block, dax: move "select DAX" from BLOCK to FS_DAX

For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.

Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.

Filesystems need to include dax.h to call bdev_dax_supported().

Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: fix build warnings with FS_DAX and !FS_IOMAP

As reported by Arnd:

https://lkml.org/lkml/2017/1/10/756

Compiling with the following configuration:

# CONFIG_EXT2_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_FS_IOMAP depends on the above filesystems, as is not set
CONFIG_FS_DAX=y

generates build warnings about unused functions in fs/dax.c:

fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function]
static int dax_insert_mapping(struct address_space *mapping,
^~~~~~~~~~~~~~~~~~
fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function]
static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size,
^~~~~~~~~~~~~
fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function]
static int dax_load_hole(struct address_space *mapping, void **entry,
^~~~~~~~~~~~~
fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function]
static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
^~~~~~~~~~~~~~~~~~

Now that the struct buffer_head based DAX fault paths and I/O path have
been removed we really depend on iomap support being present for DAX.
Make this explicit by selecting FS_IOMAP if we compile in DAX support.

This allows us to remove conditional selections of FS_IOMAP when FS_DAX
was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c.

Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

logfs: remove from tree

Logfs was introduced to the kernel in 2009, and hasn't seen any non
drive-by changes since 2012, while having lots of unsolved issues
including the complete lack of error handling, with more and more
issues popping up without any fixes.

The logfs.org domain has been bouncing from a mail, and the maintainer
on the non-logfs.org domain hasn't repsonded to past queries either.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dax: remove "depends on BROKEN" from FS_DAX_PMD

Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>

mm/hugetlb: introduce ARCH_HAS_GIGANTIC_PAGE

Avoid making ifdef get pretty unwieldy if many ARCHs support gigantic
page. No functional change with this patch.

Link: http://lkml.kernel.org/r/1475227569-63446-2-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/locks: Replace lg_local with a per-cpu spinlock

As Oleg suggested, replace file_lock_list with a structure containing
the hlist head and a spinlock.

This completely removes the lglock from fs/locks.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: tj@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

xfs: abstract block export operations from nfsd layouts

Instead of creeping pnfs layout configuration into filesystems, move the
definition of block-based export operations under a more abstract
configuration.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

fs: introduce iomap infrastructure

Add infrastructure for multipage buffered writes. This is implemented
using an main iterator that applies an actor function to a range that
can be written.

This infrastucture is used to implement a buffered write helper, one
to zero file ranges and one to implement the ->page_mkwrite VM
operations. All of them borrow a fair amount of code from fs/buffers.
for now by using an internal version of __block_write_begin that
gets passed an iomap and builds the corresponding buffer head.

The file system is gets a set of paired ->iomap_begin and ->iomap_end
calls which allow it to map/reserve a range and get a notification
once the write code is finished with it.

Based on earlier code from Dave Chinner.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>

dax: Make huge page handling depend of CONFIG_BROKEN

Currently the handling of huge pages for DAX is racy. For example the
following can happen:

CPU0 (THP write fault) CPU1 (normal read fault)

__dax_pmd_fault() __dax_fault()
get_block(inode, block, &bh, 0) -> not mapped
get_block(inode, block, &bh, 0)
-> not mapped
if (!buffer_mapped(&bh) && write)
get_block(inode, block, &bh, 1) -> allocates blocks
truncate_pagecache_range(inode, lstart, lend);
dax_load_hole();

This results in data corruption since process on CPU1 won't see changes
into the file done by CPU0.

The race can happen even if two normal faults race however with THP the
situation is even worse because the two faults don't operate on the same
entries in the radix tree and we want to use these entries for
serialization. So make THP support in DAX code depend on CONFIG_BROKEN
for now.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>

fs crypto: move per-file encryption from f2fs tree to fs/crypto

This patch adds the renamed functions moved from the f2fs crypto files.

1. definitions for per-file encryption used by ext4 and f2fs.

2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page

3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context

4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info

5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename

b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer

6. Makefile and Kconfig

Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

dax: re-enable dax pmd mappings

Now that the get_user_pages() path knows how to handle dax-pmd mappings,
remove the protections that disabled dax-pmd support.

Tests available from github.com/pmem/ndctl:

make TESTS="lib/test-dax.sh lib/test-mmap.sh" check

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: disable pmd mappings

While dax pmd mappings are functional in the nominal path they trigger
kernel crashes in the following paths:

BUG: unable to handle kernel paging request at ffffea0004098000
IP: [<ffffffff812362f7>] follow_trans_huge_pmd+0x117/0x3b0
[..]
Call Trace:
[<ffffffff811f6573>] follow_page_mask+0x2d3/0x380
[<ffffffff811f6708>] __get_user_pages+0xe8/0x6f0
[<ffffffff811f7045>] get_user_pages_unlocked+0x165/0x1e0
[<ffffffff8106f5b1>] get_user_pages_fast+0xa1/0x1b0

kernel BUG at arch/x86/mm/gup.c:131!
[..]
Call Trace:
[<ffffffff8106f34c>] gup_pud_range+0x1bc/0x220
[<ffffffff8106f634>] get_user_pages_fast+0x124/0x1b0

BUG: unable to handle kernel paging request at ffffea0004088000
IP: [<ffffffff81235f49>] copy_huge_pmd+0x159/0x350
[..]
Call Trace:
[<ffffffff811fad3c>] copy_page_range+0x34c/0x9f0
[<ffffffff810a0daf>] copy_process+0x1b7f/0x1e10
[<ffffffff810a11c1>] _do_fork+0x91/0x590

All of these paths are interpreting a dax pmd mapping as a transparent
huge page and making the assumption that the pfn is covered by the
memmap, i.e. that the pfn has an associated struct page. PTE mappings
do not suffer the same fate since they have the _PAGE_SPECIAL flag to
cause the gup path to fault. We can do something similar for the PMD
path, or otherwise defer pmd support for cases where a struct page is
available. For now, 4.4-rc and -stable need to disable dax pmd support
by default.

For development the "depends on BROKEN" line can be removed from
CONFIG_FS_DAX_PMD.

Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

locks: Allow disabling mandatory locking at compile time

Mandatory locking appears to be almost unused and buggy and there
appears no real interest in doing anything with it. Since effectively
no one uses the code and since the code is buggy let's allow it to be
disabled at compile time. I would just suggest removing the code but
undoubtedly that will break some piece of userspace code somewhere.

For the distributions that don't care about this piece of code
this gives a nice starting point to make mandatory locking go away.

Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jeff Layton <jeff.layton@primarydata.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>

Orangefs: kernel client part 7

Signed-off-by: Mike Marshall <hubcap@omnibond.com>

fs: Remove ext3 filesystem driver

The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.

Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>

f2fs: relocate Kconfig from misc filesystems

The f2fs has been shipped on many smartphone devices during a couple of years.
So, it is worth to relocate Kconfig into main page from misc filesystems for
developers to choose it more easily.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

dax: does not work correctly with virtual aliasing caches

The DAX code accesses the underlying storage through the kernel's linear
mapping, which may not be cache-coherent with user mappings on ARM, MIPS
or SPARC. Temporarily disable the DAX code until this problem is
resolved.

The original XIP code also had this problem, but it was never noticed.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs,ext2: remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX

The fewer Kconfig options we have the better. Use the generic
CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: Make efivarfs a pseudo filesystem, built by default with EFI

efivars is currently enabled under MISC_FILESYSTEMS, which is decribed
as "such as filesystems that came from other operating systems".
In reality, it is a pseudo filesystem, providing access to the kernel
UEFI variable interface.

Since this is the preferred interface for accessing UEFI variables, over
the legacy efivars interface, also build it by default as a module if
CONFIG_EFI.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

overlay filesystem

Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.

This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.

The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.

The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.

Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.

Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).

Usage:

mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay

The following cotributions have been folded into this patch:

Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read

Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts

Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON

Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API

Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link

Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode

AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename

Also thanks to the following people for testing and reporting bugs:

Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

lockd: move lockd's grace period handling into its own module

Currently, all of the grace period handling is part of lockd. Eventually
though we'd like to be able to build v4-only servers, at which point
we'll need to put all of this elsewhere.

Move the code itself into fs/nfs_common and have it build a grace.ko
module. Then, rejigger the Kconfig options so that both nfsd and lockd
enable it automatically.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>

kernfs: add CONFIG_KERNFS

As sysfs was kernfs's only user, kernfs has been piggybacking on
CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very
soon. Introduce a separate config option CONFIG_KERNFS which is to be
selected by kernfs users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: remove generic_acl

And instead convert tmpfs to use the new generic ACL code, with two stub
methods provided for in-memory filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

efivarfs: Move to fs/efivarfs

Now that efivarfs uses the efivar API, move it out of efivars.c and
into fs/efivarfs where it belongs. This move will eventually allow us
to enable the efivarfs code without having to also enable
CONFIG_EFI_VARS built, and vice versa.

Furthermore, things like,

mount -t efivarfs none /sys/firmware/efi/efivars

will now work if efivarfs is built as a module without requiring the
use of MODULE_ALIAS(), which would have been necessary when the
efivarfs code was part of efivars.c.

Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig

Given that CUSE depends on FUSE, it only makes sense to move its
Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical
and semantic touchups.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

f2fs: update Kconfig and Makefile

This adds Makefile and Kconfig for f2fs, and updates Makefile and Kconfig files
in the fs directory.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

ext4: Remove CONFIG_EXT4_FS_XATTR

Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product. David also said that "As far as I know, it's enabled in all
Android kernels that use ext4." So it seems OK for us.

And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled. So I think we should add inline data and remove this
config option in the same release.

[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
isn't much in the grand scheme of things. Since no one seems to be
testing this configuration except for some automated compile farms, on
balance we are better removing this config option, and so that it is
effectively always enabled. -- tytso ]

Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

fs: initial qnx6fs addition

Adds support for qnx6fs readonly support to the linux kernel.

* Mount option
The option mmi_fs can be used to mount Harman Becker/Audi MMI 3G
HDD qnx6fs filesystems.

* Documentation
A high level filesystem stucture description can be found in the
Documentation/filesystems directory. (qnx6.txt)

* Additional features
- Active (stable) superblock selection
- Superblock checksum check (enforced)
- Supports mount of qnx6 filesystems with to host different endianess
- Automatic endianess detection
- Longfilename support (with non-enfocing crc check)
- All blocksizes (512, 1024, 2048 and 4096 supported)

Signed-off-by: Kai Bankett <chaosman@ontika.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs: use 'unsigned long' accesses for dcache name comparison and hashing

Ok, this is hacky, and only works on little-endian machines with goo
unaligned handling. And even then only with CONFIG_DEBUG_PAGEALLOC
disabled, since it can access up to 7 bytes after the pathname.

But it runs like a bat out of hell.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ore: FIX breakage when MISC_FILESYSTEMS is not set

As Reported by Randy Dunlap

When MISC_FILESYSTEMS is not enabled and NFS4.1 is:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
...

When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
is not selected. exofs/Kconfig is never examined during Kconfig,
and it can not do it's magic stuff to automatically select everything
needed.

We must split exofs/Kconfig in two. The ore one is always included.
And the exofs one is left in it's old place in the menu.

[Needed for the 3.2.0 Kernel]
CC: Stable Tree <stable@kernel.org>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

move fs/partitions to block/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tmpfs: add "tmpfs" to the Kconfig prompt to make it obvious.

Add the leading word "tmpfs" to the Kconfig string to make it blindingly
obvious that this selection refers to tmpfs.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: expand "help" to explain value of TMPFS_POSIX_ACL

Expand the fs/Kconfig "help" info to clarify why it's a bad idea to
deselect the TMPFS_POSIX_ACL config variable.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exportfs: reallow building as a module

Commit 990d6c2d7aee921e3bce22b2d6a750fd552262be ("vfs: Add name to file
handle conversion support") changed EXPORTFS to be a bool.
This was needed for earlier revisions of the original patch, but the actual
commit put the code needing it into its own file that only gets compiled
when FHANDLE is selected which in turn selects EXPORTFS.
So EXPORTFS can be safely compiled as a module when not selecting FHANDLE.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

tmpfs: fix XATTR N overriding POSIX_ACL Y

Choosing TMPFS_XATTR default N was switching off TMPFS_POSIX_ACL,
even if it had been Y in oldconfig; and Linus reports that PulseAudio
goes subtly wrong unless it can use ACLs on /dev/shm.

Make TMPFS_POSIX_ACL select TMPFS_XATTR (and depend upon TMPFS),
and move the TMPFS_POSIX_ACL entry before the TMPFS_XATTR entry,
to avoid asking unnecessary questions then ignoring their answers.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: implement generic xattr support

Implement generic xattrs for tmpfs filesystems. The Feodra project, while
trying to replace suid apps with file capabilities, realized that tmpfs,
which is used on the build systems, does not support file capabilities and
thus cannot be used to build packages which use file capabilities. Xattrs
are also needed for overlayfs.

The xattr interface is a bit odd. If a filesystem does not implement any
{get,set,list}xattr functions the VFS will call into some random LSM hooks
and the running LSM can then implement some method for handling xattrs.
SELinux for example provides a method to support security.selinux but no
other security.* xattrs.

As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have
xattr handler routines specifically to handle acls. Because of this tmpfs
would loose the VFS/LSM helpers to support the running LSM. To make up
for that tmpfs had stub functions that did nothing but call into the LSM
hooks which implement the helpers.

This new patch does not use the LSM fallback functions and instead just
implements a native get/set/list xattr feature for the full security.* and
trusted.* namespace like a normal filesystem. This means that tmpfs can
now support both security.selinux and security.capability, which was not
previously possible.

The basic implementation is that I attach a:

struct shmem_xattr {
struct list_head list; /* anchored by shmem_inode_info->xattr_list */
char *name;
size_t size;
char value[0];
};

Into the struct shmem_inode_info for each xattr that is set. This
implementation could easily support the user.* namespace as well, except
some care needs to be taken to prevent large amounts of unswappable memory
being allocated for unprivileged users.

[mszeredi@suse.cz: new config option, suport trusted.*, support symlinks]
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: Add name to file handle conversion support

The syscall also return mount id which can be used
to lookup file system specific information such as uuid
in /proc/<pid>/mountinfo

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT

The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: FS_POSIX_ACL does not depend on BLOCK

- Fix a kconfig unmet dependency warning.
- Remove the comment that identifies which filesystems use POSIX ACL
utility routines.
- Move the FS_POSIX_ACL symbol outside of the BLOCK symbol if/endif block
because its functions do not depend on BLOCK and some of the filesystems
that use it do not depend on BLOCK.

warning: (GENERIC_ACL && JFFS2_FS_POSIX_ACL && NFSD_V4 && NFS_ACL_SUPPORT && 9P_FS_POSIX_ACL) selects FS_POSIX_ACL which has unmet direct dependencies (BLOCK)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

pstore: new filesystem interface to platform persistent storage

Some platforms have a small amount of non-volatile storage that
can be used to store information useful to diagnose the cause of
a system crash. This is the generic part of a file system interface
that presents information from the crash as a series of files in
/dev/pstore. Once the information has been seen, the underlying
storage is freed by deleting the files.

Signed-off-by: Tony Luck <tony.luck@intel.com>

locks: turn lock_flocks into a spinlock

Nothing depends on lock_flocks using the BKL
any more, so we can do the switch over to
a private spinlock.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

fs: move exportfs since it is not a networking filesystem

Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block
since it provides a library function that can be (and is) used by other
(non-network) filesystems.

This also eliminates a kconfig dependency warning:

warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move exportfs since it is not a networking filesystem

Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block
since it provides a library function that can be (and is) used by other
(non-network) filesystems.

This also eliminates a kconfig dependency warning:

warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

BKL: introduce CONFIG_BKL.

With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

smbfs: move to drivers/staging

smbfs has been scheduled for removal in 2.6.27, so
maybe we can now move it to drivers/staging on the
way out.

smbfs still uses the big kernel lock and nobody
is going to fix that, so we should be getting
rid of it soon.

This removes the 32 bit compat mount and ioctl
handling code, which is implemented in common fs
code, and moves all smbfs related files into
drivers/staging/smbfs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

autofs3: move to drivers/staging

Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.

Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.

The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fs/Kconfig: Fix typo Userpace -> Userspace

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Revert "task_struct: make journal_info conditional"

This reverts commit e4c570c4cb7a95dbfafa3d016d2739bf3fdfe319, as
requested by Alexey:

"I think I gave a good enough arguments to not merge it.
To iterate:
* patch makes impossible to start using ext3 on EXT3_FS=n kernels
without reboot.
* this is done only for one pointer on task_struct"

None of config options which define task_struct are tristate directly
or effectively."

Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

task_struct: make journal_info conditional

journal_info in task_struct is used in journaling file system only. So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[LogFS] add new flash file system

This is a new flash file system. See
Documentation/filesystems/logfs.txt

Signed-off-by: Joern Engel <joern@logfs.org>

powerpc: Cleanup Kconfig selection of hugetlbfs support

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Limit hugetlbfs support to PPC64 Book-3S machines

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations.

The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.

Reported-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

ceph: Kconfig, Makefile

Kconfig options and Makefile.

Signed-off-by: Sage Weil <sage@newdream.net>

tmpfs: depend on shmem

CONFIG_SHMEM off gives you (ramfs masquerading as) tmpfs, even when
CONFIG_TMPFS is off: that's a little anomalous, and I'd intended to make
more sense of it by removing CONFIG_TMPFS altogether, always enabling its
code when CONFIG_SHMEM; but so many defconfigs have CONFIG_SHMEM on
CONFIG_TMPFS off that we'd better leave that as is.

But there is no point in asking for CONFIG_TMPFS if CONFIG_SHMEM is off:
make TMPFS depend on SHMEM, which also prevents TMPFS_POSIX_ACL
shmem_acl.o being pointlessly built into the kernel when SHMEM is off.

And a selfish change, to prevent the world from being rebuilt when I
switch between CONFIG_SHMEM on and off: the only CONFIG_SHMEM in the
header files is mm.h shmem_lock() - give that a shmem.c stub instead.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/Kconfig: move nilfs2 outside misc filesystems

Some people asked me questions like the following:

On Wed, 15 Jul 2009 13:11:21 +0200, Leon Woestenberg wrote:
> just wondering, any reasons why NILFS2 is one of the miscellaneous
> filesystems and, for example, btrfs, is not in Kconfig?

Actually, nilfs is NOT a filesystem came from other operating systems,
but a filesystem created purely for Linux. Nor is it a flash
filesystem but that for generic block devices.

So, this moves nilfs outside the misc category as I responded in LKML
"Re: Why does NILFS2 hide under Miscellaneous filesystems?"
(Message-Id: <20090716.002526.93465395.ryusuke@osrg.net>).

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

fs/Kconfig: move nilfs2 out

fs/Kconfig file was split into individual fs/*/Kconfig files before
nilfs was merged. I've found the current config entry of nilfs is
tainting the work. Sorry, I didn't notice. This fixes the violation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Alexey Dobriyan <adobriyan@gmail.com>

Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.

As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'. Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK

CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK.

This makes it possible to run complete systems out of a CONFIG_BLOCK=n
initramfs on current kernels again (this last worked on 2.6.27.*).

Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CUSE: implement CUSE - Character device in Userspace

CUSE enables implementing character devices in userspace. With recent
additions of ioctl and poll support, FUSE already has most of what's
necessary to implement character devices. All CUSE has to do is
bonding all those components - FUSE, chardev and the driver model -
nicely.

When client opens /dev/cuse, kernel starts conversation with
CUSE_INIT. The client tells CUSE which device it wants to create. As
the previous patch made fuse_file usable without associated
fuse_inode, CUSE doesn't create super block or inodes. It attaches
fuse_file to cdev file->private_data during open and set ff->fi to
NULL. The rest of the operation is almost identical to FUSE direct IO
case.

Each CUSE device has a corresponding directory /sys/class/cuse/DEVNAME
(which is symlink to /sys/devices/virtual/class/DEVNAME if
SYSFS_DEPRECATED is turned off) which hosts "waiting" and "abort"
among other things. Those two files have the same meaning as the FUSE
control files.

The only notable lacking feature compared to in-kernel implementation
is mmap support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

lockd: fix FILE_LOCKING=n build error

lockd/svclock.c is missing a header file <linux/fs.h>.

<linux/fs.h> is missing a definition of locks_release_private()
for the config case of FILE_LOCKING=n, causing a build error:

fs/lockd/svclock.c:330: error: implicit declaration of function 'locks_release_private'

lockd without FILE_LOCKING doesn't make sense, so make LOCKD and LOCKD_V4
depend on FILE_LOCKING, and make NFS depend on FILE_LOCKING.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

nilfs2: update makefile and Kconfig

This adds a Makefile for the nilfs2 file system, and updates the
makefile and Kconfig file in the file system directory.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CacheFiles: A cache that backs onto a mounted filesystem

Add an FS-Cache cache-backend that permits a mounted filesystem to be used as a
backing store for the cache.

CacheFiles uses a userspace daemon to do some of the cache management - such as
reaping stale nodes and culling. This is called cachefilesd and lives in
/sbin. The source for the daemon can be downloaded from:

http://people.redhat.com/~dhowells/cachefs/cachefilesd.c

And an example configuration from:

http://people.redhat.com/~dhowells/cachefs/cachefilesd.conf

The filesystem and data integrity of the cache are only as good as those of the
filesystem providing the backing services. Note that CacheFiles does not
attempt to journal anything since the journalling interfaces of the various
filesystems are very specific in nature.

CacheFiles creates a misc character device - "/dev/cachefiles" - that is used
to communication with the daemon. Only one thing may have this open at once,
and whilst it is open, a cache is at least partially in existence. The daemon
opens this and sends commands down it to control the cache.

CacheFiles is currently limited to a single cache.

CacheFiles attempts to maintain at least a certain percentage of free space on
the filesystem, shrinking the cache by culling the objects it contains to make
space if necessary - see the "Cache Culling" section. This means it can be
placed on the same medium as a live set of data, and will expand to make use of
spare space and automatically contract when the set of data requires more
space.

============
REQUIREMENTS
============

The use of CacheFiles and its daemon requires the following features to be
available in the system and in the cache filesystem:

- dnotify.

- extended attributes (xattrs).

- openat() and friends.

- bmap() support on files in the filesystem (FIBMAP ioctl).

- The use of bmap() to detect a partial page at the end of the file.

It is strongly recommended that the "dir_index" option is enabled on Ext3
filesystems being used as a cache.

=============
CONFIGURATION
=============

The cache is configured by a script in /etc/cachefilesd.conf. These commands
set up cache ready for use. The following script commands are available:

(*) brun <N>%
(*) bcull <N>%
(*) bstop <N>%
(*) frun <N>%
(*) fcull <N>%
(*) fstop <N>%

Configure the culling limits. Optional. See the section on culling
The defaults are 7% (run), 5% (cull) and 1% (stop) respectively.

The commands beginning with a 'b' are file space (block) limits, those
beginning with an 'f' are file count limits.

(*) dir <path>

Specify the directory containing the root of the cache. Mandatory.

(*) tag <name>

Specify a tag to FS-Cache to use in distinguishing multiple caches.
Optional. The default is "CacheFiles".

(*) debug <mask>

Specify a numeric bitmask to control debugging in the kernel module.
Optional. The default is zero (all off). The following values can be
OR'd into the mask to collect various information:

1 Turn on trace of function entry (_enter() macros)
2 Turn on trace of function exit (_leave() macros)
4 Turn on trace of internal debug points (_debug())

This mask can also be set through sysfs, eg:

echo 5 >/sys/modules/cachefiles/parameters/debug

==================
STARTING THE CACHE
==================

The cache is started by running the daemon. The daemon opens the cache device,
configures the cache and tells it to begin caching. At that point the cache
binds to fscache and the cache becomes live.

The daemon is run as follows:

/sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>]

The flags are:

(*) -d

Increase the debugging level. This can be specified multiple times and
is cumulative with itself.

(*) -s

Send messages to stderr instead of syslog.

(*) -n

Don't daemonise and go into background.

(*) -f <configfile>

Use an alternative configuration file rather than the default one.

===============
THINGS TO AVOID
===============

Do not mount other things within the cache as this will cause problems. The
kernel module contains its own very cut-down path walking facility that ignores
mountpoints, but the daemon can't avoid them.

Do not create, rename or unlink files and directories in the cache whilst the
cache is active, as this may cause the state to become uncertain.

Renaming files in the cache might make objects appear to be other objects (the
filename is part of the lookup key).

Do not change or remove the extended attributes attached to cache files by the
cache as this will cause the cache state management to get confused.

Do not create files or directories in the cache, lest the cache get confused or
serve incorrect data.

Do not chmod files in the cache. The module creates things with minimal
permissions to prevent random users being able to access them directly.

=============
CACHE CULLING
=============

The cache may need culling occasionally to make space. This involves
discarding objects from the cache that have been used less recently than
anything else. Culling is based on the access time of data objects. Empty
directories are culled if not in use.

Cache culling is done on the basis of the percentage of blocks and the
percentage of files available in the underlying filesystem. There are six
"limits":

(*) brun
(*) frun

If the amount of free space and the number of available files in the cache
rises above both these limits, then culling is turned off.

(*) bcull
(*) fcull

If the amount of available space or the number of available files in the
cache falls below either of these limits, then culling is started.

(*) bstop
(*) fstop

If the amount of available space or the number of available files in the
cache falls below either of these limits, then no further allocation of
disk space or files is permitted until culling has raised things above
these limits again.

These must be configured thusly:

0 <= bstop < bcull < brun < 100
0 <= fstop < fcull < frun < 100

Note that these are percentages of available space and available files, and do
_not_ appear as 100 minus the percentage displayed by the "df" program.

The userspace daemon scans the cache to build up a table of cullable objects.
These are then culled in least recently used order. A new scan of the cache is
started as soon as space is made in the table. Objects will be skipped if
their atimes have changed or if the kernel module says it is still using them.

===============
CACHE STRUCTURE
===============

The CacheFiles module will create two directories in the directory it was
given:

(*) cache/

(*) graveyard/

The active cache objects all reside in the first directory. The CacheFiles
kernel module moves any retired or culled objects that it can't simply unlink
to the graveyard from which the daemon will actually delete them.

The daemon uses dnotify to monitor the graveyard directory, and will delete
anything that appears therein.

The module represents index objects as directories with the filename "I..." or
"J...". Note that the "cache/" directory is itself a special index.

Data objects are represented as files if they have no children, or directories
if they do. Their filenames all begin "D..." or "E...". If represented as a
directory, data objects will have a file in the directory called "data" that
actually holds the data.

Special objects are similar to data objects, except their filenames begin
"S..." or "T...".

If an object has children, then it will be represented as a directory.
Immediately in the representative directory are a collection of directories
named for hash values of the child object keys with an '@' prepended. Into
this directory, if possible, will be placed the representations of the child
objects:

INDEX INDEX INDEX DATA FILES
========= ========== ================================= ================
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry
cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry

If the key is so long that it exceeds NAME_MAX with the decorations added on to
it, then it will be cut into pieces, the first few of which will be used to
make a nest of directories, and the last one of which will be the objects
inside the last directory. The names of the intermediate directories will have
'+' prepended:

J1223/@23/+xy...z/+kl...m/Epqr

Note that keys are raw data, and not only may they exceed NAME_MAX in size,
they may also contain things like '/' and NUL characters, and so they may not
be suitable for turning directly into a filename.

To handle this, CacheFiles will use a suitably printable filename directly and
"base-64" encode ones that aren't directly suitable. The two versions of
object filenames indicate the encoding:

OBJECT TYPE PRINTABLE ENCODED
=============== =============== ===============
Index "I..." "J..."
Data "D..." "E..."
Special "S..." "T..."

Intermediate directories are always "@" or "+" as appropriate.

Each object in the cache has an extended attribute label that holds the object
type ID (required to distinguish special objects) and the auxiliary data from
the netfs. The latter is used to detect stale objects in the cache and update
or retire them.

Note that CacheFiles will erase from the cache any file it doesn't recognise or
any file of an incorrect type (such as a FIFO file or a device file).

==========================
SECURITY MODEL AND SELINUX
==========================

CacheFiles is implemented to deal properly with the LSM security features of
the Linux kernel and the SELinux facility.

One of the problems that CacheFiles faces is that it is generally acting on
behalf of a process, and running in that process's context, and that includes a
security context that is not appropriate for accessing the cache - either
because the files in the cache are inaccessible to that process, or because if
the process creates a file in the cache, that file may be inaccessible to other
processes.

The way CacheFiles works is to temporarily change the security context (fsuid,
fsgid and actor security label) that the process acts as - without changing the
security context of the process when it the target of an operation performed by
some other process (so signalling and suchlike still work correctly).

When the CacheFiles module is asked to bind to its cache, it:

(1) Finds the security label attached to the root cache directory and uses
that as the security label with which it will create files. By default,
this is:

cachefiles_var_t

(2) Finds the security label of the process which issued the bind request
(presumed to be the cachefilesd daemon), which by default will be:

cachefilesd_t

and asks LSM to supply a security ID as which it should act given the
daemon's label. By default, this will be:

cachefiles_kernel_t

SELinux transitions the daemon's security ID to the module's security ID
based on a rule of this form in the policy.

type_transition <daemon's-ID> kernel_t : process <module's-ID>;

For instance:

type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t;

The module's security ID gives it permission to create, move and remove files
and directories in the cache, to find and access directories and files in the
cache, to set and access extended attributes on cache objects, and to read and
write files in the cache.

The daemon's security ID gives it only a very restricted set of permissions: it
may scan directories, stat files and erase files and directories. It may
not read or write files in the cache, and so it is precluded from accessing the
data cached therein; nor is it permitted to create new files in the cache.

There are policy source files available in:

http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2

and later versions. In that tarball, see the files:

cachefilesd.te
cachefilesd.fc
cachefilesd.if

They are built and installed directly by the RPM.

If a non-RPM based system is being used, then copy the above files to their own
directory and run:

make -f /usr/share/selinux/devel/Makefile
semodule -i cachefilesd.pp

You will need checkpolicy and selinux-policy-devel installed prior to the
build.

By default, the cache is located in /var/fscache, but if it is desirable that
it should be elsewhere, than either the above policy files must be altered, or
an auxiliary policy must be installed to label the alternate location of the
cache.

For instructions on how to add an auxiliary policy to enable the cache to be
located elsewhere when SELinux is in enforcing mode, please see:

/usr/share/doc/cachefilesd-*/move-cache.txt

When the cachefilesd rpm is installed; alternatively, the document can be found
in the sources.

==================
A NOTE ON SECURITY
==================

CacheFiles makes use of the split security in the task_struct. It allocates
its own task_security structure, and redirects current->act_as to point to it
when it acts on behalf of another process, in that process's context.

The reason it does this is that it calls vfs_mkdir() and suchlike rather than
bypassing security and calling inode ops directly. Therefore the VFS and LSM
may deny the CacheFiles access to the cache data because under some
circumstances the caching code is running in the security context of whatever
process issued the original syscall on the netfs.

Furthermore, should CacheFiles create a file or directory, the security
parameters with that object is created (UID, GID, security label) would be
derived from that process that issued the system call, thus potentially
preventing other processes from accessing the cache - including CacheFiles's
cache management daemon (cachefilesd).

What is required is to temporarily override the security of the process that
issued the system call. We can't, however, just do an in-place change of the
security data as that affects the process as an object, not just as a subject.
This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.

So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as). The
objective security holds the intrinsic security properties of a process and is
never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).

The subjective security holds the active security properties of a process, and
may be overridden. This is not seen externally, and is used whan a process
acts upon another object, for example SIGKILLing another process or opening a
file.

LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request
for CacheFiles to run in a context of a specific security label, or to create
files and directories with another security label.

This documentation is added by the patch to:

Documentation/filesystems/caching/cachefiles.txt

Signed-Off-By: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>

FS-Cache: Add main configuration option, module entry points and debugging

Add the main configuration option, allowing FS-Cache to be selected; the
module entry and exit functions and the debugging stuff used by these patches.

The two configuration options added are:

CONFIG_FSCACHE
CONFIG_FSCACHE_DEBUG

The first enables the facility, and the second makes the debugging statements
enableable through the "debug" module parameter. The value of this parameter
is a bitmask as described in:

Documentation/filesystems/caching/fscache.txt

The module can be loaded at this point, but all it will do at this point in
the patch series is to start up the slow work facility and shut it down again.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>

fs: Add exofs to Kernel build

- Add exofs to fs/Kconfig under "menu 'Miscellaneous filesystems'"
- Add exofs to fs/Makefile

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

quota: Move quota files into separate directory

Quota subsystem has more and more files. It's time to create a dir for it.

Signed-off-by: Jan Kara <jack@suse.cz>

fs/Kconfig: move 9p out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move afs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move coda out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move the rest of ncpfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move smbfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move sunrpc out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move nfsd out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move nfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move ufs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move sysv out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move romfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move qnx4 out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move hpfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move omfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move minix out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move vxfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move squashfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move cramfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move efs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move bfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move befs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move hfs, hfsplus out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move ecryptfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move affs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move adfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move configfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move sysfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move ntfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move fat out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move iso9660, udf out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move fuse out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move autofs, autofs4 out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move btrfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move ocfs2 out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move jfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs/Kconfig: move reiserfs out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

fs: use menuconfig to control the Misc. filesystems menu

Have one option to control Miscellaneous filesystems. This makes it easy
to disable all of them at one time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: Assign feature bits and system inodes to quota feature and quota files

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

quota: Split off quota tree handling into a separate file

There is going to be a new version of quota format having 64-bit
quota limits and a new quota format for OCFS2. They are both
going to use the same tree structure as VFSv0 quota format. So
split out tree handling into a separate file and make size of
leaf blocks, amount of space usable in each block (needed for
checksumming) and structures contained in them configurable
so that the code can be shared.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

ocfs2: Remove JBD compatibility layer

JBD2 is fully backwards compatible with JBD and it's been tested enough with
Ocfs2 that we can clean this code up now.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>

ocfs2: add mount option and Kconfig option for acl

This patch adds the Kconfig option "CONFIG_OCFS2_FS_POSIX_ACL"
and mount options "acl" to enable acls in Ocfs2.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Squashfs: Kconfig entry

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>

filesystem notification: create fs/notify to contain all fs notification

Creating a generic filesystem notification interface, fsnotify, which will be
used by inotify, dnotify, and eventually fanotify is really starting to
clutter the fs directory. This patch simply moves inotify and dnotify into
fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/
and future notification tidier.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Btrfs: Add zlib compression support

This is a large change for adding compression on reading and writing,
both for inline and regular extents. It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress. Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler. This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now. This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field. Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k. This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k. This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data. This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread. This makes it tricky to
spread the compression load across all the cpus on the box. We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

[patch 1/3] FS_MBCACHE: don't needlessly make it built-in

Assume you have:
- one or more of ext2/3/4 statically built into your kernel
- none of these with extended attributes enabled and
- want to add onother one of ext2/3/4 modular and with
extended attributes enabled

then you currently have to reboot to use it since this results in
CONFIG_FS_MBCACHE=y.

That's not a common issue, but I just ran into it and since there's no
reason to get a built-in mbcache in this case this patch fixes it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/Kconfig: move ext2, ext3, ext4, JBD, JBD2 out

Use fs/*/Kconfig more, which is good because everything related to one
filesystem is in one place and fs/Kconfig is quite fat.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/Kconfig: move CIFS out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: config description improvement

Make the short description of the FUSE_FS config option clearer.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

ocfs2: Switch over to JBD2.

ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is
limiting our maximum filesystem size.

It's a pretty trivial change. Most functions are just renamed. The
only functional change is moving to Jan's inode-based ordered data mode.
It's better, too.

Because JBD2 reads and writes JBD journals, this is compatible with any
existing filesystem. It can even interact with JBD-based ocfs2 as long
as the journal is formated for JBD.

We provide a compatibility option so that paranoid people can still use
JBD for the time being. This will go away shortly.

[ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to
ocfs2_truncate_for_delete(). --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

ext4: fix kconfig typo and extra whitespace

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Fix Kconfig typo for ext4dev

Looks like there is one more instance where ext4dev should be changed
to ext4 because the module name will be "ext4" unless EXT4DEV_COMPAT
is selected.

Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: Rename ext4dev to ext4

The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix. Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

SUNRPC: Support IPv6 when registering kernel RPC services

In order to advertise NFS-related services on IPv6 interfaces via
rpcbind, the kernel RPC server implementation must use
rpcb_v4_register() instead of rpcb_register().

A new kernel build option allows distributions to use the legacy
v2 call until they integrate an appropriate user-space rpcbind
daemon that can support IPv6 RPC services.

I tried adding some automatic logic to fall back if registering
with a v4 protocol request failed, but there are too many corner
cases. So I just made it a compile-time switch that distributions
can throw when they've replaced portmapper with rpcbind.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Configure out file locking features

This patch adds the CONFIG_FILE_LOCKING option which allows to remove
support for advisory locks. With this patch enabled, the flock()
system call, the F_GETLK, F_SETLK and F_SETLKW operations of fcntl()
and NFS support are disabled. These features are not necessarly needed
on embedded systems. It allows to save ~11 Kb of kernel code and data:

text data bss dec hex filename
1125436 118764 212992 1457192 163c28 vmlinux.old
1114299 118564 212992 1445855 160fdf vmlinux
-11137 -200 0 -11337 -2C49 +/-

This patch has originally been written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: matthew@wil.cx
Cc: linux-fsdevel@vger.kernel.org
Cc: mpm@selenic.com
Cc: akpm@linux-foundation.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Add Btrfs to fs/Kconfig and fs/Makefile

Signed-off-by: Chris Mason <chris.mason@oracle.com>

[JFFS2] Move JFFS2 config options out of fs/Kconfig

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[CIFS] Reorder cifs config item for better clarity

Signed-off-by: Steve French <sfrench@us.ibm.com>

[CIFS] Correct keys dependency for cifs kerberos support

Must also depend on CIFS ...

Signed-off-by: Steve French <sfrench@us.ibm.com>

[CIFS] Kerberos support not considered experimental anymore

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

omfs: update kbuild to include OMFS

Adds OMFS to the fs Kconfig and Makefile

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: move Kconfig to fs/proc/Kconfig

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coda: remove CODA_FS_OLD_API

While fixing CONFIG_ leakages to the userspace kernel headers I ran into
CODA_FS_OLD_API.

After five years, are there still people using the old API left?
Especially considering that you have to choose at compile time which API
to support in the kernel (and distributions tend to offer the new API for
some time).

Jan: "The old API can definitely go. Around the time the new
interface went in there were some non-Coda userspace file system
implementations that took a while longer to convert to the new API,
but by now they all switched to the new interface or in some cases
to a FUSE-based solution."

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UBIFS: include to compilation

Add UBIFS to Makefile and Kbuild.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>

[PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option

This patch adds config option CONFIG_OCFS2_FS_STATS to allow building
the fs with instrumentation enabled. An upcoming patch will provide
support to instrument cluster locking, which is a crucial overhead in
a cluster file system. This config option allows users to avoid the cpu
and memory overhead that is involved in gathering such statistics.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

SUNRPC: Use only rpcbind v2 for AF_INET requests

Some server vendors support the higher versions of rpcbind only for
AF_INET6. The kernel doesn't need to use v3 or v4 for AF_INET anyway,
so change the kernel's rpcbind client to query AF_INET servers over
rpcbind v2 only.

This has a few interesting benefits:

1. If the rpcbind request is going over TCP, and the server doesn't
support rpcbind versions 3 or 4, the client reduces by two the number
of ephemeral ports left in TIME_WAIT for each rpcbind request. This
will help during NFS mount storms.

2. The rpcbind interaction with servers that don't support rpcbind
versions 3 or 4 will use less network traffic. Also helpful
during mount storms.

3. We can eliminate the kernel build option that controls whether the
kernel's rpcbind client uses rpcbind version 3 and 4 for AF_INET
servers. Less complicated kernel configuration...

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Update help text for CONFIG_NFS_FS

Clean up: refresh the help text for Kconfig items related to the NFS
client. Remove obsolete URLs, and make the language consistent among
the options.

Also move the ROOT_NFS config option next to the options related to the
NFS client.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

x86, crashdump, /proc/vmcore: remove CONFIG_EXPERIMENTAL from kdump

I would suggest to remove the "experimental" status from Kdump.
Kdump is now in the kernel since a long time and used by Enterprise
distributions. I don't think that "experimental" is true any more.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: kexec@lists.infradead.org
Cc: Bernhard Walle <bwalle@suse.de>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ntfs: update help text

The url in the help text for ntfs should be updated.

Acked-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[S390] System z large page support.

This adds hugetlbfs support on System z, using both hardware large page
support if available and software large page emulation on older hardware.
Shared (large) page tables are implemented in software emulation mode,
by using page->index of the first tail page from a compound large page
to store page table information.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

NFSD: Remove NFSv4 dependency on NFSv3

Clean up: Because NFSD_V4 "depends on" NFSD_V3, it appears as a child of
the NFSD_V3 menu entry, and is not visible if NFSD_V3 is unselected.

Replace the dependency on NFSD_V3 with a "select NFSD_V3". This makes
NFSD_V4 look and work just like NFS_V3, while ensuring that NFSD_V3 is
enabled if NFSD_V4 is.

Sam Ravnborg adds:

"This use of select is questionable. In general it is bad to select
a symbol with dependencies.

In this case the dependencies of NFSD_V3 are duplicated for NFSD_V4
so we will not se erratic configurations but do you remember to
update NFSD_V4 when you add a depends on NFSD_V3?

But I see no other clean way to do it right now."

Later he said:

"My comment was more to say we have things to address in kconfig.
This is abuse in the acceptable range."

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

SUNRPC: Remove PROC_FS dependency

Recently, commit 440bcc59 added a reverse dependency to fs/Kconfig to
ensure that PROC_FS was enabled if SUNRPC_GSS was enabled.

Apparently this isn't necessary because the auth_gss components under
net/sunrpc will build correctly even if PROC_FS is disabled, though
RPCSEC_GSS will not work without /proc.

It also violates the guideline in Documentation/kbuild/kconfig-language.txt
that states "In general use select only for non-visible symbols (no prompts
anywhere) and for symbols with no dependencies."

To address these issues, remove the dependency.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Use "depends on" for PROC_FS dependency

Recently, commit 440bcc59 added a reverse dependency to fs/Kconfig to
ensure that PROC_FS was enabled if NFSD_V4 was enabled.

There is a guideline in Documentation/kbuild/kconfig-language.txt that
states "In general use select only for non-visible symbols (no prompts
anywhere) and for symbols with no dependencies."

A quick grep around other Kconfig files reveals that no entry currently
uses "select PROC_FS" -- every one uses "depends on". Thus CONFIG_NFSD_V4
should use "depends on PROC_FS" as well.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Remove redundant "select" clauses in fs/Kconfig

As far as I can tell, selecting the CRYPTO and CRYPTO_MD5 entries under
CONFIG_NFSD is redundant, since CONFIG_NFSD_V4 already selects
RPCSEC_GSS_KRB5, which selects these entries.

Testing with "make menuconfig" shows that the entries under CRYPTO still
properly reflect "Y" or "M" based on the setting of CONFIG_NFSD after this
change is applied.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Move "select NFSD_V2_ACL if NFSD_V3_ACL"

Clean up: since NFSD_V2_ACL is a boolean, it can be selected safely
under the NFSD_V3_ACL entry (also a boolean).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Move "select FS_POSIX_ACL if NFSD_V4"

Clean up: since FS_POSIX_ACL is a non-visible boolean entry, it can be
selected safely under the NFSD_V4 entry (also a boolean).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Update help text for CONFIG_NFSD

Clean up: refresh the help text for Kconfig items related to the NFS
server. Remove obsolete URLs, and make the language consistent among
the options.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

NFSD: Remove NFSD_TCP kernel build option

Likewise, distros usually leave CONFIG_NFSD_TCP enabled.

TCP support in the Linux NFS server is stable enough that we can leave it
on always. CONFIG_NFSD_TCP adds about 10 lines of code, and defaults to
"Y" anyway.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

ocfs2: Allow selection of cluster plug-ins.

ocfs2 now supports plug-ins for the classic O2CB stack as well as
userspace cluster stacks in conjunction with fs/dlm. This allows zero,
one, or both of the plug-ins to be selected in Kconfig. For local mounts
(non-clustered), neither plug-in is needed. Both plugins can be loaded
at one time, the runtime will select the one needed for the cluster
systme in use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

udf: use crc_itu_t from lib instead of udf_crc

As pointed out by Sergey Vlasov, UDF implements its own version of
the CRC ITU-T V.41. Convert it to use the one in the library.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Jan Kara <jack@suse.cz>

Documentation: move nfsroot.txt to filesystems/

Documentation/ is a little large, and filesystems/ seems an obvious
place for this file.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

SUNRPC: Add a default setting for CONFIG_SUNRPC_BIND34

Most distros will want support for rpcbind protocols 3 and 4 to default off
until they have integrated user-space support for the new rpcbind daemon
which supports IPv6 RPC services.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

SUNRPC: Update help Kconfig text

Clean up: refresh the help text for Kconfig items related to the sunrpc
module. Remove obsolete URLs, and make the language consistent among
the options.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Always enable NFS direct I/O

Since O_DIRECT is a standard feature that is enabled in most distros,
eliminate the CONFIG_NFS_DIRECTIO build option, and change the
fs/nfs/Makefile to always build in the NFS direct I/O engine.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

SUNRPC xptrdma: simplify build configuration


Trond and Bruce,

This is a patch for 2.6.25. This is the same version that was sent out
on December 12 for review (no comments to date).

To simplify the RPC/RDMA client and server build configuration, make
SUNRPC_XPRT_RDMA a hidden config option that continues to depend on
SUNRPC and INFINIBAND. The value of SUNRPC_XPRT_RDMA will be:

- N if either SUNRPC or INFINIBAND are N
- M if both SUNRPC and INFINIBAND are on (M or Y) and at least one is M
- Y if both SUNRPC and INFINIBAND are Y

In 2.6.25, all of the RPC/RDMA related files are grouped in
net/sunrpc/xprtrdma and the net/sunrpc/xprtrdma/Makefile builds both
the client and server RPC/RDMA support using this config option.

Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

fs menu: small reorg

- move minixfs and ROMfs to the Miscellaneous filesystems menu
- move DNOTIFY config symbol so that it is adjacent to INOTIFY
instead of being split by the QUOTA config options
- add some 'endif' annotations
- remove some whitespace (extra blank lines)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

deprecate smbfs in favour of cifs

smbfs is a bit buggy and has no maintainer. Change it to shout at the user on
the first five mount attempts - tell them to switch to CIFS.

Come December we'll mark it BROKEN and see what happens.

[olecom@flower.upol.cz: documentation update]
Cc: Urban Widmark <urban@teststation.com>
Acked-by: Steven French <sfrench@us.ibm.com>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: select CONFIG_PROC_FS in nfsv4 and gss server cases

The server depends on upcalls under /proc to support nfsv4 and gss.

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

ext4: Add the journal checksum feature

The journal checksum feature adds two new flags i.e
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM.

JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the
checksum for the blocks described by the descriptor blocks.
Due to checksums, writing of the commit record no longer needs to be
synchronous. Now commit record can be sent to disk without waiting for
descriptor blocks to be written to disk. This behavior is controlled
using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be
able to recover the journal with _ASYNC_COMMIT hence it is made
incompat.
The commit header has been extended to hold the checksum along with the
type of the checksum.

For recovery in pass scan checksums are verified to ensure the sanity
and completeness(in case of _ASYNC_COMMIT) of every transaction.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>

configfs: Remove EXPERIMENTAL

configfs has been alive and kicking for a while now. It underpins some
non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: Documentation update

Remove 'readpages' from the list in ocfs2.txt. Instead of having two
identical lists, I just removed the list in the OCFS2 section of fs/Kconfig
and added a pointer to Documentation/filesystems/ocfs2.txt.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Preempt-RCU: implementation

This patch implements a new version of RCU which allows its read-side
critical sections to be preempted. It uses a set of counter pairs
to keep track of the read-side critical sections and flips them
when all tasks exit read-side critical section. The details
of this implementation can be found in this paper -

http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf

and the article-

http://lwn.net/Articles/253651/

This patch was developed as a part of the -rt kernel development and
meant to provide better latencies when read-side critical sections of
RCU don't disable preemption. As a consequence of keeping track of RCU
readers, the readers have a slight overhead (optimizations in the paper).
This implementation co-exists with the "classic" RCU implementations
and can be switched to at compiler.

Also includes RCU tracing summarized in debugfs.

[ akpm@linux-foundation.org: build fixes on non-preempt architectures ]

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Reviewed-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix file references in documentation and Kconfig

Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.

README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[CIFS] DNS name resolution helper upcall for cifs

Adds additional option CIFS_DFS_UPCALL to fs/Kconfig for enabling
DFS support. Resolved IP address is saved as a string in the
key payload.

Igor has a series of related patches that will follow which finish up
CIFS DFS support

Acked-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

fs/Kconfig: grammar fix

This was introduced in 4af8e944c22d8af92a7548354a9567250cc1a782

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ocfs2: Remove expensive bitmap scanning

Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[CIFS] implement upcalls for SPNEGO blob via keyctl API

Add routines to handle upcalls to userspace via keyctl for the purpose
of getting a SPNEGO blob for a particular uid and server combination.

Clean up the Makefile a bit and set it up to only compile cifs_spnego
if CONFIG_CIFS_UPCALL is set. Also change CONFIG_CIFS_UPCALL to depend
on CONFIG_KEYS rather than CONFIG_CONNECTOR.

cifs_spnego.h defines the communications between kernel and userspace
and is intended to be shared with userspace programs.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Kbuild/doc: fix links to Documentation files

Fix links to files in Documentation/* in various Kconfig files

Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jbd: config_jbd_debug cannot create /proc entry

The jbd-debug file used to be located in /proc/sys/fs/jbd-debug, but
create_proc_entry() does not do lookups on file names that are more that
one directory deep. This causes the entry creation to fail and hence, no
proc file is created.

Instead of fixing this on procfs might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd/jbd-debug.

[akpm@linux-foundation.org: zillions of cleanups]
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ext4: Uninitialized Block Groups

In pass1 of e2fsck, every inode table in the fileystem is scanned and checked,
regardless of whether it is in use. This is this the most time consuming part
of the filesystem check. The unintialized block group feature can greatly
reduce e2fsck time by eliminating checking of uninitialized inodes.

With this feature, there is a a high water mark of used inodes for each block
group. Block and inode bitmaps can be uninitialized on disk via a flag in the
group descriptor to avoid reading or scanning them at e2fsck time. A checksum
of each group descriptor is used to ensure that corruption in the group
descriptor's bit flags does not cause incorrect operation.

The feature is enabled through a mkfs option

mke2fs /dev/ -O uninit_groups

A patch adding support for uninitialized block groups to e2fsprogs tools has
been posted to the linux-ext4 mailing list.

The patches have been stress tested with fsstress and fsx. In performance
tests testing e2fsck time, we have seen that e2fsck time on ext3 grows
linearly with the total number of inodes in the filesytem. In ext4 with the
uninitialized block groups feature, the e2fsck time is constant, based
solely on the number of used inodes rather than the total inode count.
Since typical ext4 filesystems only use 1-10% of their inodes, this feature can
greatly reduce e2fsck time for users. With performance improvement of 2-20
times, depending on how full the filesystem is.

The attached graph shows the major improvements in e2fsck times in filesystems
with a large total inode count, but few inodes in use.

In each group descriptor if we have

EXT4_BG_INODE_UNINIT set in bg_flags:
Inode table is not initialized/used in this group. So we can skip
the consistency check during fsck.
EXT4_BG_BLOCK_UNINIT set in bg_flags:
No block in the group is used. So we can skip the block bitmap
verification for this group.

We also add two new fields to group descriptor as a part of
uninitialized group patch.

__le16 bg_itable_unused; /* Unused inodes count */
__le16 bg_checksum; /* crc16(sb_uuid+group+desc) */

bg_itable_unused:

If we have EXT4_BG_INODE_UNINIT not set in bg_flags
then bg_itable_unused will give the offset within
the inode table till the inodes are used. This can be
used by fsck to skip list of inodes that are marked unused.

bg_checksum:
Now that we depend on bg_flags and bg_itable_unused to determine
the block and inode usage, we need to make sure group descriptor
is not corrupt. We add checksum to group descriptor to
detect corruption. If the descriptor is found to be corrupt, we
mark all the blocks and inodes in the group used.

Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

menuconfig: transform Network Filesystems menu

Turn Network File Systems into a menuconfig so that it can be disabled at
once.

(Note: I added a "default y". If you do not like that, speak up.)

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Van Hensbergen <ericvh@hera.kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

quota: send messages via netlink

Implement sending of quota messages via netlink interface. The advantage
is that in userspace we can better decide what to do with the message - for
example display a dialogue in your X session or just write the message to
the console. As a bonus, we can get rid of problems with console locking
deep inside filesystem code once we remove the old printing mechanism.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove valueless definition of hard-selected RAMFS option

Since CONFIG_RAMFS is currently hard-selected to "y", and since
Documentation/filesystems/ramfs-rootfs-initramfs.txt reads as follows:

"The amount of code required to implement ramfs is tiny, because all the
work is done by the existing Linux caching infrastructure. Basically,
you're mounting the disk cache as a filesystem. Because of this, ramfs is
not an optional component removable via menuconfig, since there would be
negligible space savings."

It seems pointless to leave this as a Kconfig entry.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

allow disabling DNOTIFY without EMBEDDED

Allow disabling DNOTIFY with CONFIG_EMBEDDED=n.

I'm currently running a kernel with dnotify disabled and I haven't run into
any problem. Is there any popular application left that breaks without
dnotify support in the kernel?

Note that this patch does not remove dnotify support, it still defaults to
"y", and the help text recommends enabling it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SUNRPC: Add RDMA dependency to SUNRPC_XPRT_RDMA

Add a dependency on RDMA before enabling SUNRPC_XPRT_RDMA
Yes, "INFINIBAND" also turns on iWARP and other RDMA support.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

RPCRDMA: Kconfig and header file with rpcrdma protocol definitions

This file implements the configuration target, protocol template and
constants for the rpcrdma transport framing, for use by the xprtrdma
rpc transport implementation.

Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

ocfs2: update docs for new features

Update documentation listing ocfs2 features to reflect the current state of
the file system. Add missing descriptions for some mount options which ocfs2
supports.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[JFFS2] LZO compression should default off for compatibility.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS

Bruce's patch broke the ability to compile RPCSEC_GSS as a module.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

jbd2: Move jbd2-debug file to debugfs

The jbd2-debug file used to be located in /proc/sys/fs/jbd2-debug, but it
incorrectly used create_proc_entry() instead of the sysctl routines, and
no proc entry was ever created.

Instead of fixing this we might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd2/jbd2-debug.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

knfsd: nfsd4: build rpcsec_gss whenever nfsd4 is built

Select rpcsec_gss support whenever asked for NFSv4 support. The rfc actually
requires gss, and gss is also the main reason to migrate to v4. We already do
this on the client side.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9p: Reorganization of 9p file system code

This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p.
It moves the transport, packet marshalling and connection layers to net/9p
leaving only the VFS related files in fs/9p. This work is being done in
preparation for in-kernel 9p servers as well as alternate 9p clients (other
than VFS).

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

[JFFS2] Add a "favourlzo" compression mode

Add a "favourlzo" compression mode to jffs2 which tries to
optimise by size but gives lzo an advantage when comparing sizes.
This means the faster lzo algorithm can be preferred when there
isn't much difference in compressed size (the exact threshold can
be changed).

Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

[JFFS2] Add LZO compression support.

Add LZO1X compression/decompression support to jffs2.

LZO's interface doesn't entirely match that required by jffs2 so a
buffer and memcpy is unavoidable.

Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

[JFFS2] Add support for write-buffer verification.

We've seen some evil corruption issues, where the corruption seems to be
introduced after the JFFS2 crc32 is calculated but before the NAND
controller calculates the ECC. So it's in RAM or in the PCI DMA
transfer; not on the flash. Attempt to catch it earlier by (optionally)
reading back from the flash immediately after writing it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

[JFFS2] Whitespace cleanups.

Convert many spaces to tabs; one or two other minor cosmetic fixes.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

fs: hugetlbfs: Disable for shnommu.

SH can turn CONFIG_MMU on and off, don't let us get to a state
where hugetlbfs/hugetlbpage gets built when building for nommu.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Remove obsolete fat_cvf help text

The text removed by the following patch refers to functionality that never
worked, to non-existing documentation file, and to mount options marked as
obsolete in the module.

Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru>
Signed-off-by: Adrian Bunk <bunk@stusta.de>