#
71aa4d3e |
|
13-Jul-2020 |
Lee Jones <lee.jones@linaro.org> |
scsi: aacraid: Demote partially documented function header This should be populated by someone who knows the meaning of all the params. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isAif' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isFastResponse' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'aif_fib' not described in 'aac_intr_normal' Link: https://lore.kernel.org/r/20200713080001.128044-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
0123c7c6 |
|
13-Jul-2020 |
Lee Jones <lee.jones@linaro.org> |
scsi: aacraid: Remove unused variable 'status' Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_aif_callback’: drivers/scsi/aacraid/dpcsup.c:232:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 232 | int status; | ^~~~~~ Link: https://lore.kernel.org/r/20200713080001.128044-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
2fee77e5 |
|
13-Jul-2020 |
Lee Jones <lee.jones@linaro.org> |
scsi: aacraid: Fix logical bug when !DBG When DBG is not enabled FIB_COUNTER_INCREMENT() results in an empty statement, leaving the contents of if() and else() empty. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_response_normal’: drivers/scsi/aacraid/dpcsup.c:105:50: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 105 | FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | ^ drivers/scsi/aacraid/dpcsup.c: In function ‘aac_intr_normal’: drivers/scsi/aacraid/dpcsup.c:411:30: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 411 | aac_config.AsyncRecved); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
c82ee6d3 |
|
19-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
bc127d93 |
|
10-Dec-2018 |
Arnd Bergmann <arnd@arndb.de> |
scsi: aacraid: change event_wait to a completion The event_wait semaphore has completion semantics, so we can change it over to the completion interface for clarity without changing the behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
d98e000c |
|
06-Aug-2018 |
Dongliang Mu <mudongliangabcd@gmail.com> |
scsi: aacraid: Spelling fix in comment requesed -> requested Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
f4babba0 |
|
02-Feb-2017 |
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> |
scsi: aacraid: Update copyrights Added new copyright messages Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Dave Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
423400e6 |
|
02-Feb-2017 |
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> |
scsi: aacraid: Include HBA direct interface Added support to send direct pasthru srb commands from management utilty to the controller. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Dave Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
3ffd6c5a |
|
02-Feb-2017 |
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> |
scsi: aacraid: Added support for response path This patch enables the driver to actually process the I/O, or srb replies from adapter. In addition to any HBA1000 or SmartIOC2000 adapter events. Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by: Dave Carroll <David.Carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
eef76f16 |
|
26-Apr-2016 |
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> |
aacraid: Remove code to needlessly complete fib Currently driver completes double completed or spurious interrupted fibs. This is not necessary and causes the SCSI mid layer to issue aborts and resets, since completing a fib prematurely might trigger a race condition resulting in the driver not calling the scsi_done callback. Fixed by removing the call to fib complete. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
6bf3b630 |
|
03-Feb-2016 |
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> |
aacraid: SCSI blk tag support The method to allocate and free FIB's in the present code utilizes spinlocks. Multiple IO's have to wait on the spinlock to acquire or free fibs creating a performance bottleneck. An alternative solution would be to use block layer tags to keep track of the fibs allocated and freed. To this end aac_fib_alloc_tag was created to utilize the blk layer tags to plug into the Fib pool.These functions are used exclusively in the IO path. 8 fibs are reserved for the use of AIF management software and utilize the previous spinlock based implementations. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
ef616233 |
|
26-Mar-2015 |
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> |
aacraid: performance improvement changes Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
#
495c0217 |
|
26-Mar-2015 |
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> |
aacraid: MSI-x support Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
#
85d22bbf |
|
14-Jul-2012 |
Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> |
[SCSI] aacraid: Series 7 Async. (performance) mode support - Series 7 Async. (performance) mode support added - New scatter/gather list format for Series 7 - Driver converts s/g list to a firmware suitable list for best performance on Series 7, this can be disabled with driver parameter "aac_convert_sgl" for testing purposes - New container read/write command structure for Series 7 - Fast response support for the SCSI pass-through path added - Async. status response buffer changes Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
#
e8b12f0f |
|
17-Mar-2011 |
Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> |
[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family. - new src.c file for 0x28b specific functions - new XPORT header required - sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT) - async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status - changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
cacb6dc3 |
|
21-Dec-2009 |
Penchala Narasimha Reddy Chilakala, ERS-HCLTech <narasimhareddyc@hcl.in> |
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
fa195afe |
|
27-Oct-2008 |
Alan Cox <alan@lxorguk.ukuu.org.uk> |
[SCSI] Clean up my email address and use a single standard address for everything Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
6188e10d |
|
18-Apr-2008 |
Matthew Wilcox <willy@infradead.org> |
Convert asm/semaphore.h users to linux/semaphore.h Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
|
#
b6ef70f3 |
|
08-Jan-2008 |
Salyzyn, Mark <Mark_Salyzyn@adaptec.com> |
[SCSI] aacraid: OS panic after Adapter panic (hardening). In experiments in the lab we managed to trigger an Adapter firmware panic (BlinkLED) coincidentally while several pass-through ioctl command from the management software were outstanding on a bug only present on a class of RAID Adapters that require a hardware reset rather than a commanded reset. The net result was an attempt to time out the management software command as if it came from the SCSI layer resulting in an OS panic. Adapters that use commanded reset, management commands are returned failed by the Adapter correctly. The adapter firmware panic that resulted in this condition was also resolved, and there were no adapters in the field with this specific firmware bug so we do not expect any field reports. This is a rare or unlikely corner condition, and no reports have ever been forwarded from the field. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
f3307f72 |
|
08-Nov-2007 |
Christoph Hellwig <hch@infradead.org> |
[SCSI] aacraid: don't assign cpu_to_le32(int) to u8 On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
#
142956af |
|
28-Oct-2007 |
Al Viro <viro@ftp.linux.org.uk> |
fix abuses of ptrdiff_t Use of ptrdiff_t in places like - if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len)) + if (!access_ok(VERIFY_WRITE, (u8 __user *) + (ptrdiff_t) u_tmp->rx_buf, + u_tmp->len)) is wrong; for one thing, it's a bad C (it's what uintptr_t is for; in general we are not even promised that ptrdiff_t is large enough to hold a pointer, just enough to hold a difference between two pointers within the same object). For another, it confuses the fsck out of sparse. Use unsigned long or uintptr_t instead. There are several places misusing ptrdiff_t; fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4dbc22d7 |
|
16-Apr-2007 |
Salyzyn, Mark <mark_salyzyn@adaptec.com> |
[SCSI] aacraid: kmalloc/memset->kzalloc Inspired somewhat by Vignesh Babu <vignesh.babu@wipro.com> patch to dpt_i2o.c to replace kmalloc/memset sequences with kzalloc, doing the same for the aacraid driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
6473d160 |
|
06-Mar-2007 |
Jean Delvare <khali@linux-fr.org> |
PCI: Cleanup the includes of <linux/pci.h> I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
4dfb7cbe |
|
27-Mar-2007 |
Salyzyn, Mark <mark_salyzyn@adaptec.com> |
[SCSI] aacraid: resolve compiler warnings using ptrdiff_t Unsigned long is not always the same size as a pointer, namely on 32 bit systems with 64 bit address space. Ptrdiff_t is the same size as a pointer in all configurations. By using ptrdiff_t we can mitigate the warning messages on these configurations. There should be no side effects of this patch. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
03d44337 |
|
15-Mar-2007 |
Mark Haverkamp <markh@linux-foundation.org> |
[SCSI] aacraid: Improved error handling Received from Mark Salyzyn, This set of fixes improve error handling stability of the driver. A popular manifestation of the problems is an NULL pointer reference in the interrupt handler when referencing portions of the scsi command context, or in the scsi_done handling when an offlined device is referenced. The aacraid driver currently does not get notification of orphaned command completions due to devices going offline. The driver also fails to handle the commands that are finished by the error handler, and thus can complete again later at the hands of the adapter causing situations of completion of an invalid scsi command context. Test Unit Ready calls abort assuming that the abort was successful, but are not, and thus when the interrupt from the adapter occurs, they reference invalid command contexts. We add in a TIMED_OUT flag to inform the aacraid FIB context that the interrupt service should merely release the driver resources and not complete the command up. We take advantage of this with the abort handler as well for select abortable commands. And we detect and react if a command that can not be aborted is currently still outstanding to the controller when reissued by the retry mechanism. Signed-off-by: Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
a8166a52 |
|
15-Mar-2007 |
Mark Haverkamp <markh@linux-foundation.org> |
[SCSI] aacraid: Fix struct element name issue Received from Mark Salyzyn, This patch is to resolve a namespace issue that will result from a patch expected in the future that adds a new interface; rationalized as correcting a long term issue where hw_fib, instead of hw_fib_va, refers to the virtual address space and hw_fib_pa refers to the physical address space. A small fragment of this patch also cleans up an unused variable that was close to the patch fragments. Signed-off-by: Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
cd354f1a |
|
14-Feb-2007 |
Tim Schmielau <tim@physik3.uni-rostock.de> |
[PATCH] remove many unneeded #includes of sched.h After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c8f7b073 |
|
03-Aug-2006 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: interruptible ioctl Received from Mark Salyzyn This patch allows the FSACTL_SEND_LARGE_FIB, FSACTL_SENDFIB and FSACTL_SEND_RAW_SRB ioctl calls into the aacraid driver to be interruptible. Only necessary if the adapter and/or the management software has gone into some sort of misbehavior and the system is being rebooted, thus permitting the user management software applications to be killed relatively cleanly. The FIB queue resource is held out of the free queue until the adapter finally, if ever, completes the command. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
a623e14d |
|
08-Jun-2006 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: small misc. cleanups Received from Mark Salyzyn Spelling correction, orphaned comment removal & update branch name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
5b9851b5 |
|
10-May-2006 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: remove unneeded list Received From Mark Salyzyn The queue tracking is just not being used, not even for debugging. Information about outstanding commands can be acquired from the scsi structures. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
bfb35aa8 |
|
01-Feb-2006 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: Update global function names Received from Mark Salyzyn, Reduce the possibility of namespace collision. Prefix with aac_. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
8e0c5ebd |
|
24-Oct-2005 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: Newer adapter communication iterface support Received from Mark Salyzyn. This patch adds the 'new comm' interface, which modern AAC based adapters that are less than a year old support in the name of much improved performance. These modern adapters support both the legacy and the 'new comm' interfaces. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
56b58712 |
|
27-Apr-2005 |
Mark Haverkamp <markh@osdl.org> |
[SCSI] aacraid: remove sparse warnings This patch addresses the sparse -Wbitwise warnings that Christoph wanted me to eliminate. This mostly consisted of making data structure elements of hardware associated structures the __le* equivalent. Although there were a couple places where there was mixing of cpu and le variable math. These changes have been tested on both an x86 and ppc machine running bonnie++. The usage of the LE32_ALL_ONES macro has been eliminated. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|