phy: constify of_phandle_args in xlate

The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: lan966x: Add missing serdes mux entry

According to the datasheet(Table 3-2: Port configuration) the serdes 2
(SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII
mode is supported in the serdes_muxes list but was missing the SGMII mode.
In this mode the serdes is connected to the port 4.
Therefore add this entry in the list.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: Add RGMII support on lan966x

The serdes driver contains also a mux to decide which interface type to
use. Currently the driver supports GMII/SGMII/QSGMII and partially RGMII.
As it doesn't support all the other RGMII interfaces like
RGMII_TXID/RXID/ID and it could run only at 1G.
Therefore extend this for all the other speeds(10/100) and also allow
the other interfaces.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220901121455.245103-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: lan966x: add support for QUSGMII

Makes so that the serdes driver also takes QUSGMII in consideration.
It's configured exactly as QSGMII as far as the serdes driver is
concerned.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: lan966x: Remove set_speed function

Remove the set_speed function and allow the driver to figure out the
speed at which needs to configure the serdes based on the interface type.

Fixes: 305524902a0045 ("phy: Add lan966x ethernet serdes PHY driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211211214717.1284306-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: lan966x: Extend lan966x to support multiple phy interfaces.

Currently the driver is supporting only the interfaces QSGMII, SGMII,
RGMII and GMII. This patch extend the supported interfaces with
1000BASE-X and 2500BASE-X.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

phy: Add lan966x ethernet serdes PHY driver

Add the Microchip lan966x ethernet serdes PHY driver for interfaces
available in the lan966x SoC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211116100818.1615762-4-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>