#
6a57a219 |
|
13-Feb-2024 |
Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> |
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" Found with git grep 'MODULE_AUTHOR(".*([^)]*@' Fixed with sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \ $(git grep -l 'MODULE_AUTHOR(".*([^)]*@') Also: in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc"; this is what every other MODULE_AUTHOR for this company says, and it's what the header says in drivers/sbus/char/openprom.c normalise a double-spaced separator; this is clearly copied from the copyright header, where the names are aligned on consecutive lines thusly: * Linux/SPARC PROM Configuration Driver * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) but the authorship branding is single-line Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
ebb0346a |
|
18-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: simplify tg3_phy_autoneg_cfg Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8306ee08 |
|
18-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: copy only needed fields from userspace-provided EEE data The current code overwrites fields in tp->eee with unchecked data from edata, e.g. the bitmap with supported modes. ethtool properly returns the received data from get_eee() call, but we have no guarantee that other users of the ioctl set_eee() interface behave properly too. Therefore copy only fields which are actually needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0972d1d9 |
|
08-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: fix bug caused by uninitialized variable The reported bug is caused by using mii_eee_cap1_mod_linkmode_t() with an uninitialized bitmap. Fix this by zero-initializing the struct containing the bitmap. Fixes: 9bc791341bc9a5c22b ("tg3: convert EEE handling to use linkmode bitmaps") Reported-by: Srikanth Aithal <sraithal@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9bc79134 |
|
03-Feb-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: convert EEE handling to use linkmode bitmaps Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Note: The change to mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val) in tg3_phy_autoneg_cfg() isn't completely obvious, but it doesn't change the current functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/0652b910-6bcc-421f-8769-38f7dae5037e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
1d756ff1 |
|
27-Jan-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d80a5233 |
|
27-Jan-2024 |
Heiner Kallweit <hkallweit1@gmail.com> |
ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb6e30a7 |
|
12-Dec-2023 |
Ahmed Zaki <ahmed.zaki@intel.com> |
net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
16b55b1f |
|
30-Nov-2023 |
Thinh Tran <thinhtr@linux.vnet.ibm.com> |
net/tg3: fix race condition in tg3_reset_task() When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
17dd5efe |
|
13-Nov-2023 |
Alex Pakhunov <alexey.pakhunov@spacex.com> |
tg3: Increment tx_dropped in tg3_tso_bug() tg3_tso_bug() drops a packet if it cannot be segmented for any reason. The number of discarded frames should be incremented accordingly. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
907d1bdb |
|
13-Nov-2023 |
Alex Pakhunov <alexey.pakhunov@spacex.com> |
tg3: Move the [rt]x_dropped counters to tg3_napi This change moves [rt]x_dropped counters to tg3_napi so that they can be updated by a single writer, race-free. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
c542b39b |
|
05-Nov-2023 |
Alex Pakhunov <alexey.pakhunov@spacex.com> |
tg3: Fix the TX ring stall The TX ring maintained by the tg3 driver can end up in the state, when it has packets queued for sending but the NIC hardware is not informed, so no progress is made. This leads to a multi-second interruption in network traffic followed by dev_watchdog() firing and resetting the queue. The specific sequence of steps is: 1. tg3_start_xmit() is called at least once and queues packet(s) without updating tnapi->prodmbox (netdev_xmit_more() returns true) 2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be called. 3. tg3_tso_bug() determines that the SKB is too large, ... if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) { ... stops the queue, and returns NETDEV_TX_BUSY: netif_tx_stop_queue(txq); ... if (tg3_tx_avail(tnapi) <= frag_cnt_est) return NETDEV_TX_BUSY; 4. Since all tg3_tso_bug() call sites directly return, the code updating tnapi->prodmbox is skipped. 5. The queue is stuck now. tg3_start_xmit() is not called while the queue is stopped. The NIC is not processing new packets because tnapi->prodmbox wasn't updated. tg3_tx() is not called by tg3_poll_work() because the all TX descriptions that could be freed has been freed: /* run TX completion thread */ if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) { tg3_tx(tnapi); 6. Eventually, dev_watchdog() fires triggering a reset of the queue. This fix makes sure that the tnapi->prodmbox update happens regardless of the reason tg3_start_xmit() returned. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9fc3bc76 |
|
03-Nov-2023 |
George Shuklin <george.shuklin@gmail.com> |
tg3: power down device only on SYSTEM_POWER_OFF Dell R650xs servers hangs on reboot if tg3 driver calls tg3_power_down. This happens only if network adapters (BCM5720 for R650xs) were initialized using SNP (e.g. by booting ipxe.efi). The actual problem is on Dell side, but this fix allows servers to come back alive after reboot. Signed-off-by: George Shuklin <george.shuklin@gmail.com> Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
cf8e8658 |
|
20-Oct-2022 |
Ard Biesheuvel <ardb@kernel.org> |
arch: Remove Itanium (IA-64) architecture The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
#
b22f21f7 |
|
13-Oct-2023 |
Pavan Chebbi <pavan.chebbi@broadcom.com> |
tg3: Improve PTP TX timestamping logic When we are trying to timestamp a TX packet, there may be occasions when the TX timestamp register is still not updated with the latest timestamp even if the timestamp packet descriptor is marked as complete. This usually happens in cases where the system is under stress or flow control is affecting the transmit side. We will solve this problem by saving the snapshot of the timestamp register when we are posting the TX descriptor. At this time, the register contains previously timestamped packet's value and valid timestamp of the current packet must be different than this. Upon completion of the current descriptor, we will check if the timestamp register is updated or not before timestamping the skb. If not updated, we will schedule the ptp worker to fetch the updated time later and timestamp the skb. Also now we restrict number of outstanding PTP TX packet requests to 1. Reported-by: Simon White <Simon.White@viavisolutions.com> Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/ Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec1b9088 |
|
25-Aug-2023 |
Mikhail Kobuk <m.kobuk@ispras.ru> |
ethernet: tg3: remove unreachable code 'tp->irq_max' value is either 1 [L16336] or 5 [L16354], as indicated in tg3_get_invariants(). Therefore, 'i' can't exceed 4 in tg3_init_one() that makes (i <= 4) always true. Moreover, 'intmbx' value set at the last iteration is not used later in it's scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 78f90dcf184b ("tg3: Move napi_add calls below tg3_get_invariants") Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ecb2ced |
|
11-Aug-2023 |
Zheng Zengkai <zhengzengkai@huawei.com> |
tg3: Use pci_dev_id() to simplify the code PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
99b415fe |
|
18-Aug-2023 |
Kees Cook <keescook@chromium.org> |
tg3: Use slab_build_skb() when needed The tg3 driver will use kmalloc() under some conditions. Check the frag_size and use slab_build_skb() when frag_size is 0. Silences the warning introduced by commit ce098da1497c ("skbuff: Introduce slab_build_skb()"): Use slab_build_skb() instead ... tg3_poll_work+0x638/0xf90 [tg3] Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Reported-by: Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/all/1bd4cb9c-4eb8-3bdb-3e05-8689817242d1@proxmox.com Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
046f753d |
|
27-Jun-2023 |
Tobias Heider <me@tobhe.de> |
Add MODULE_FIRMWARE() for FIRMWARE_TG357766. Fixes a bug where on the M1 mac mini initramfs-tools fails to include the necessary firmware into the initrd. Fixes: c4dab50697ff ("tg3: Download 57766 EEE service patch firmware") Signed-off-by: Tobias Heider <me@tobhe.de> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/ZJt7LKzjdz8+dClx@tobhe.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
d457a0e3 |
|
08-Jun-2023 |
Eric Dumazet <edumazet@google.com> |
net: move gso declarations and functions to their own files Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
6c4ca03b |
|
24-Jan-2023 |
David Christensen <drc@linux.vnet.ibm.com> |
net/tg3: resolve deadlock in tg3_reset_task() during EEH During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf43ef23 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
e3f18e9d |
|
09-Nov-2022 |
Jacob Keller <jacob.e.keller@intel.com> |
ptp: tg3: convert .adjfreq to .adjfine The tg3 implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this to the newer .adjfine, using the recently added diff_by_scaled_ppm helper function to calculate the difference and direction of the adjustment. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b48b89f9 |
|
27-Sep-2022 |
Jakub Kicinski <kuba@kernel.org> |
net: drop the weight argument from netif_napi_add We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
f029c781 |
|
30-Aug-2022 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
net: ethernet: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
2ca1c94c |
|
25-Aug-2022 |
Kai-Heng Feng <kai.heng.feng@canonical.com> |
tg3: Disable tg3 device on system reboot to avoid triggering AER Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/ BugLink: https://bugs.launchpad.net/bugs/1917471 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
504148fe |
|
30-Jun-2022 |
Eric Dumazet <edumazet@google.com> |
net: add skb_[inner_]tcp_all_headers helpers Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9c9211a3 |
|
10-Dec-2021 |
Hangbin Liu <liuhangbin@gmail.com> |
net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEX Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
74624944 |
|
18-Nov-2021 |
Hao Chen <chenhao288@hisilicon.com> |
ethtool: extend ringparam setting/getting API with rx_buf_len Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0c500ef5 |
|
04-Nov-2021 |
luo penghao <luo.penghao@zte.com.cn> |
tg3: Remove redundant assignments The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c71e0c9 |
|
18-Oct-2021 |
luo penghao <cgel.zte@gmail.com> |
ethernet: Remove redundant statement The variable will be assigned again later in the if condition, there is no meaning there. drivers/net/ethernet/broadcom/tg3.c:5750:2 warning: Value stored to 'current_link_up' is never read. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a04436b2 |
|
08-Oct-2021 |
Jakub Kicinski <kuba@kernel.org> |
ethernet: tg3: remove direct netdev->dev_addr writes tg3 does various forms of direct writes to netdev->dev_addr. Use a local buffer. Make sure local buffer is aligned since eth_platform_get_mac_address() may call ether_addr_copy(). tg3_get_device_address() returns whenever it finds a method that found a valid address. Instead of modifying all the exit points pass the buffer from the outside and commit the address in the caller. Constify the argument of the set addr helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6ed3f61e |
|
08-Oct-2021 |
Jean Sacren <sakiwit@gmail.com> |
net: tg3: fix redundant check of true expression Remove the redundant check of (tg3_asic_rev(tp) == ASIC_REV_5705) after it is checked to be true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20211008063147.1421-1-sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
fe5d8bd3 |
|
06-Oct-2021 |
Jean Sacren <sakiwit@gmail.com> |
net: tg3: fix obsolete check of !err The err variable is checked for true or false a few lines above. When !err is checked again, it always evaluates to true. Therefore we should skip this check. We should also group the adjacent statements together for readability. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a05e4c0a |
|
04-Oct-2021 |
Jakub Kicinski <kuba@kernel.org> |
ethernet: use eth_hw_addr_set() for dev->addr_len cases Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
466a79f4 |
|
18-Aug-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: Search VPD with pci_vpd_find_ro_info_keyword() Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Link: https://lore.kernel.org/r/0ae9d4c0-590d-682a-a0af-2272e5f71630@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
8d6ab5c5 |
|
18-Aug-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: Validate VPD checksum with pci_vpd_check_csum() Validate the VPD checksum with pci_vpd_check_csum() to simplify the code. Link: https://lore.kernel.org/r/7297fce9-47db-3b86-366e-10b9ef43beaf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
f240e150 |
|
18-Aug-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: Read VPD with pci_vpd_alloc() Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This simplifies the code, and we no longer have to make assumptions about VPD size. Link: https://lore.kernel.org/r/bd3cd19c-b74f-9704-5786-476bf35ab5de@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
f3ccfda1 |
|
20-Aug-2021 |
Yufeng Mo <moyufeng@huawei.com> |
ethtool: extend coalesce setting uAPI with CQE mode In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
df70303d |
|
21-Aug-2021 |
Christophe JAILLET <christophe.jaillet@wanadoo.fr> |
net: broadcom: switch from 'pci_' to 'dma_' API The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a7605370 |
|
27-Jul-2021 |
Arnd Bergmann <arnd@arndb.de> |
dev_ioctl: split out ndo_eth_ioctl Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4cf0abbc |
|
01-Apr-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument All callers pass 0 as offset. Therefore remove the parameter and use a fixed offset 0 in pci_vpd_find_tag(). Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
32aeba1f |
|
16-Feb-2021 |
Florian Fainelli <f.fainelli@gmail.com> |
tg3: Remove unused PHY_BRCM flags The tg3 driver tried to communicate towards the PHY driver whether it wanted RGMII in-band signaling enabled or disabled however there is nothing that looks at those flags in drivers/net/phy/broadcom.c so this does do not anything. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
24f97b6a |
|
22-Jan-2021 |
Heiner Kallweit <hkallweit1@gmail.com> |
tg3: improve PCI VPD access When working on the PCI VPD code I also tested with a Broadcom BCM95719 card. tg3 uses internal NVRAM access with this card, so I forced it to PCI VPD mode for testing. PCI VPD access fails (i + PCI_VPD_LRDT_TAG_SIZE + j > len) because only TG3_NVM_VPD_LEN (256) bytes are read, but PCI VPD has 400 bytes on this card. So add a constant TG3_NVM_PCI_VPD_MAX_LEN that defines the maximum PCI VPD size. The actual VPD size is returned by pci_read_vpd(). In addition it's not worth looping over pci_read_vpd(). If we miss the 125ms timeout per VPD dword read then definitely something is wrong, and if the tg3 module loading is killed then there's also not much benefit in retrying the VPD read. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/cb9e9113-0861-3904-87e0-d4c4ab3c8860@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
55669934 |
|
03-Sep-2020 |
Michael Chan <michael.chan@broadcom.com> |
tg3: Fix soft lockup when tg3_reset_task() fails. If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df561f66 |
|
23-Aug-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
#
3a2656a2 |
|
17-Jun-2020 |
David Christensen <drc@linux.vnet.ibm.com> |
tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4d2c9994 |
|
08-May-2020 |
Colin Ian King <colin.king@canonical.com> |
net: tg3: tidy up loop, remove need to compute off with a multiply Currently the value for 'off' is computed using a multiplication and a couple of statements later off is being incremented by len and this value is never read. Clean up the code by removing the multiplication and just increment off by len on each iteration. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
3eb2efbe |
|
09-Mar-2020 |
Jakub Kicinski <kuba@kernel.org> |
net: tg3: reject unsupported coalescing params Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e3c0a635 |
|
01-Mar-2020 |
Leon Romanovsky <leon@kernel.org> |
net/broadcom: Clean broadcom code from driver versions Use linux kernel version for ethtool and module versions. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9f072238 |
|
08-Jan-2020 |
Jason A. Donenfeld <Jason@zx2c4.com> |
net: tg3: use skb_list_walk_safe helper for gso segments This is a straight-forward conversion case for the new function, and while we're at it, we can remove a null write to skb->next by replacing it with skb_mark_not_on_list. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0290bd29 |
|
10-Dec-2019 |
Michael S. Tsirkin <mst@redhat.com> |
netdev: pass the stuck queue to the timeout handler This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f9048f1 |
|
14-Nov-2019 |
Jacob Keller <jacob.e.keller@intel.com> |
net: reject PTP periodic output requests with unsupported flags Commit 823eb2a3c4c7 ("PTP: add support for one-shot output") introduced a new flag for the PTP periodic output request ioctl. This flag is not currently supported by any driver. Fix all drivers which implement the periodic output request ioctl to explicitly reject any request with flags they do not understand. This ensures that the driver does not accidentally misinterpret the PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future. This is important for forward compatibility: if a new flag is introduced, the driver should reject requests to enable the flag until the driver has actually been modified to support the flag in question. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f521eaa9 |
|
23-Jul-2019 |
Chuhong Yuan <hslester96@gmail.com> |
net: broadcom: Use dev_get_drvdata Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
49eef82d |
|
07-Jun-2019 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
tg3: Use napi_alloc_frag() tg3_alloc_rx_data() uses netdev_alloc_frag() for skb allocation. All callers of tg3_alloc_rx_data() either hold tp->lock (which is held with BH disabled) or run in NAPI context. Use napi_alloc_frag() for skb allocations. Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
caf2c520 |
|
08-Apr-2019 |
Michael Zhivich <mzhivich@akamai.com> |
broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb24ea52 |
|
22-Feb-2019 |
Will Deacon <will@kernel.org> |
drivers: Remove explicit invocations of mmiowb() mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
|
#
f0dfecc9 |
|
01-Apr-2019 |
Jon Maxwell <jmaxwell37@gmail.com> |
tg3: allow ethtool -p to work for NICs in down state Make tg3 behave like other drivers and let "ethtool -p" identify the NIC even when it's in the DOWN state. Before this patch it would get an error as follows if the NIC was down: # ip link set down dev em4 # ethtool -p em4 Cannot identify NIC: Resource temporarily unavailable With this patch ethtool identify works regardless of whether the NIC is up or down as it does for other drivers. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6b16f9ee |
|
01-Apr-2019 |
Florian Westphal <fw@strlen.de> |
net: move skb->xmit_more hint to softnet data There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
015496c4 |
|
23-Jan-2019 |
Gustavo A. R. Silva <gustavo@embeddedor.com> |
broadcom: Mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:6336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2231:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:783:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
750afb08 |
|
04-Jan-2019 |
Luis Chamberlain <mcgrof@kernel.org> |
cross-tree: phase out dma_zalloc_coherent() We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
59663e42 |
|
19-Nov-2018 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cddaf02b |
|
17-Nov-2018 |
thesven73@gmail.com <thesven73@gmail.com> |
tg3: optionally use eth_platform_get_mac_address() to get mac address This function will try to determine the mac address via the devicetree, or via an architecture-specific method (e.g. a PROM on SPARC). The SPARC-specific code in this driver (#ifdef SPARC) did exactly this, and is therefore removed. Note that you can now specify the tg3 mac address via the devicetree, on any platform, not just SPARC: Devicetree example: (see Documentation/devicetree/bindings/pci/pci.txt) &pcie { host@0 { #address-cells = <3>; #size-cells = <2>; reg = <0 0 0 0 0>; bcm5778: bcm5778@0 { reg = <0 0 0 0 0>; mac-address = [CA 11 AB 1E 10 01]; }; }; }; Signed-off-by: Sven Van Asbroeck <svendev@arcx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c1bcc86 |
|
10-Nov-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Convert phydev advertize and supported from u32 to link mode There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6fe42e22 |
|
09-Nov-2018 |
Miroslav Lichvar <mlichvar@redhat.com> |
tg3: extend PTP gettime function to read system clock This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
310fc051 |
|
13-Sep-2018 |
Gustavo A. R. Silva <gustavo@embeddedor.com> |
tg3: Fix fall-through annotations Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
22b7d299 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper to determine if pause configuration is supported Rather than have MAC drivers open code the test, add a helper in phylib. This will help when we change the type of phydev->supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
70814e81 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for set_pauseparam for Asym Pause ethtool can be used to enable/disable pause. Add a helper to configure the PHY when asym pause is supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
af8d9bb2 |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Add helper for MACs which support asym pause Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
04b7d41d |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Fix up drivers masking pause support PHY drivers don't indicate they support pause. They expect MAC drivers to enable its support if the MAC has the needed hardware. Thus MAC drivers should not mask Pause support, but enable it. Change a few ANDs to ORs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
58056c1e |
|
11-Sep-2018 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: Use phy_set_max_speed() to limit advertised speed Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5d258b48 |
|
17-Jul-2018 |
Krzysztof Kozlowski <krzk@kernel.org> |
net: ethernet: Use existing define with polynomial Do not define again the polynomial but use header with existing define. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
#
3a498606 |
|
15-Jul-2018 |
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> |
tg3: Add higher cpu clock for 5762. This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0f2605fb |
|
15-Jul-2018 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Update copyright Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9b10000f |
|
27-Jun-2018 |
Gustavo A. R. Silva <gustavo@embeddedor.com> |
tg3: Mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6396bb22 |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
d89a2adb |
|
03-May-2018 |
Michael Chan <michael.chan@broadcom.com> |
tg3: Fix vunmap() BUG_ON() triggered from tg3_free_consistent(). tg3_free_consistent() calls dma_free_coherent() to free tp->hw_stats under spinlock and can trigger BUG_ON() in vunmap() because vunmap() may sleep. Fix it by removing the spinlock and relying on the TG3_FLAG_INIT_COMPLETE flag to prevent race conditions between tg3_get_stats64() and tg3_free_consistent(). TG3_FLAG_INIT_COMPLETE is always cleared under tp->lock before tg3_free_consistent() and therefore tg3_get_stats64() can safely access tp->hw_stats under tp->lock if TG3_FLAG_INIT_COMPLETE is set. Fixes: f5992b72ebe0 ("tg3: Fix race condition in tg3_get_stats64().") Reported-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3757ba4 |
|
23-Mar-2018 |
Joe Perches <joe@perches.com> |
ethernet: Use octal not symbolic permissions Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ea91df6d |
|
13-Mar-2018 |
Jonathan Toppins <jtoppins@redhat.com> |
tg3: prevent scheduling while atomic splat The problem was introduced in commit 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
506b0a39 |
|
18-Feb-2018 |
Prashant Sreedharan <prashant.sreedharan@broadcom.com> |
tg3: APE heartbeat changes In ungraceful host shutdown or driver crash case BMC connectivity is lost. APE firmware is missing the driver state in this case to keep the BMC connectivity alive. This patch has below change to address this issue. Heartbeat mechanism with APE firmware. This heartbeat mechanism is needed to notify the APE firmware about driver state. This patch also has the change in wait time for APE event from 1ms to 20ms as there can be some delay in getting response. v2: Drop inline keyword as per David suggestion. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8a4816ca |
|
02-Jan-2018 |
Prashant Sreedharan <prashant.sreedharan@broadcom.com> |
tg3: Add Macronix NVRAM support This patch adds the support for Macronix NVRAM Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e60ee41a |
|
22-Dec-2017 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Enable PHY reset in MTU change path for 5720 A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4419bb1c |
|
22-Dec-2017 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Add workaround to restrict 5762 MRRS to 2048 One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5a8bae97 |
|
22-Dec-2017 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Update copyright Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
748a240c |
|
15-Dec-2017 |
Brian King <brking@linux.vnet.ibm.com> |
tg3: Fix rx hang on MTU change with 5717/5719 This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e99e88a9 |
|
16-Oct-2017 |
Kees Cook <keescook@chromium.org> |
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
4896ad68 |
|
21-Sep-2017 |
Allen Pais <allen.lkml@gmail.com> |
drivers: net: tg3: use setup_timer() helper. Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
23f48222 |
|
14-Sep-2017 |
Colin Ian King <colin.king@canonical.com> |
tg3: clean up redundant initialization of tnapi tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1e9d8e7a |
|
24-Aug-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
tg3: Be drop monitor friendly tg3_tx() does the normal packet TX completion, tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a new SKB that is suitable to workaround HW bugs, and finally tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for these 3 locations to be SKB drop monitor friendly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5514174f |
|
13-Jun-2017 |
yuval.shaia@oracle.com <yuval.shaia@oracle.com> |
net: phy: Make phy_ethtool_ksettings_get return void Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
37a7fdf2 |
|
03-May-2017 |
YueHaibing <yuehaibing@huawei.com> |
tg3: don't clear stats while tg3_close Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse its salves to get statistics,cumulative the increment.If a tg3 NIC is added to bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value (ex.1638.3 PiB) because of negative increment. Fixes: 92feeabf3f67 ("tg3: Save stats across chip resets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
038e893d |
|
06-Mar-2017 |
Florian Fainelli <f.fainelli@gmail.com> |
tg3: Add the ability to conditionally build w/ HWMON Introduce a Kconfig option: CONFIG_TIGON3_HWMON which allows to build in/out support for thermal sensors reported by Tigon3 NICs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
174cd4b1 |
|
02-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
bc1f4470 |
|
06-Jan-2017 |
stephen hemminger <stephen@networkplumber.org> |
net: make ndo_get_stats64 a void function The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f5992b72 |
|
06-Jan-2017 |
Michael Chan <michael.chan@broadcom.com> |
tg3: Fix race condition in tg3_get_stats64(). The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e1c6dcca |
|
17-Oct-2016 |
Jarod Wilson <jarod@redhat.com> |
ethernet/broadcom: use core min/max MTU checking tg3: min_mtu 60, max_mtu 9000/1500 bnxt: min_mtu 60, max_mtu 9000 bnx2x: min_mtu 46, max_mtu 9600 - Fix up ETH_OVREHEAD -> ETH_OVERHEAD while we're in here, remove duplicated defines from bnx2x_link.c. bnx2: min_mtu 46, max_mtu 9000 - Use more standard ETH_* defines while we're at it. bcm63xx_enet: min_mtu 46, max_mtu 2028 - compute_hw_mtu was made largely pointless, and thus merged back into bcm_enet_change_mtu. b44: min_mtu 60, max_mtu 1500 CC: netdev@vger.kernel.org CC: Michael Chan <michael.chan@broadcom.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com CC: Siva Reddy Kallam <siva.kallam@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1b0ff898 |
|
29-Sep-2016 |
Milton Miller <miltonm@us.ibm.com> |
tg3: Avoid NULL pointer dereference in tg3_io_error_detected() While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b6f5be28 |
|
25-Sep-2016 |
Philippe Reynes <tremyfr@gmail.com> |
net: tg3: use new api ethtool_{get|set}_link_ksettings The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aabdd09d |
|
01-Sep-2016 |
Ivan Vecera <ivecera@redhat.com> |
tg3: Fix for disallow tx coalescing time to be 0 The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing time to be 0" disallow to set Rx coalescing time to be 0 as this stops generating interrupts for the incoming packets. I found the zero Tx coalescing time stops generating interrupts for outgoing packets as well and fires Tx watchdog later. To avoid this, don't allow to set Tx coalescing time to 0 and also remove subsequent checks that become senseless. Cc: satish.baddipadige@broadcom.com Cc: siva.kallam@broadcom.com Cc: michael.chan@broadcom.com Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9ce6fd7a |
|
02-Aug-2016 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Report the correct number of RSS queues through tg3_get_rxnfc This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
087d7a8c |
|
02-Aug-2016 |
Satish Baddipadige <satish.baddipadige@broadcom.com> |
tg3: Fix for diasllow rx coalescing time to be 0 When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
860e9538 |
|
03-May-2016 |
Florian Westphal <fw@strlen.de> |
treewide: replace dev->trans_start update with helper Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b7d98729 |
|
03-Feb-2016 |
Siva Reddy Kallam <siva.kallam@broadcom.com> |
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e434e041 |
|
28-Jan-2016 |
Arnd Bergmann <arnd@arndb.de> |
net: tg3: avoid uninitialized variable warning The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f854420 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Add API for {un}registering an mdio device to a bus. Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e7f4dc35 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
mdio: Move allocation of interrupts into core Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2220943a |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: Centralise print about attached phy Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
84eff6d1 |
|
06-Jan-2016 |
Andrew Lunn <andrew@lunn.ch> |
phy: add phydev_name() wrapper Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3d11fe0 |
|
01-Sep-2015 |
Jean Delvare <jdelvare@suse.de> |
tg3: Fix temperature reporting The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0bf493 ("tg3: Add hwmon support for temperature") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: stable@vger.kernel.org [v3.6+] Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e51423d9 |
|
06-May-2015 |
Alexander Duyck <alexander.h.duyck@redhat.com> |
bnx2x, tg3: Replace put_page(virt_to_head_page()) with skb_free_frag() Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dfc8f370 |
|
23-Apr-2015 |
Gavin Shan <gwshan@linux.vnet.ibm.com> |
net/tg3: Release IRQs on permanent error When having permanent EEH error, the PCI device will be removed from the system. For this case, we shouldn't set pcierr_recovery to true wrongly, which blocks the driver to release the allocated interrupts and their handlers. Eventually, we can't disable MSI or MSIx successfully because of the MSI or MSIx interrupts still have associated interrupt actions, which is turned into following stack dump. Oops: Exception in kernel mode, sig: 5 [#1] : [c0000000003b76a8] .free_msi_irqs+0x80/0x1a0 (unreliable) [c00000000039f388] .pci_remove_bus_device+0x98/0x110 [c0000000000790f4] .pcibios_remove_pci_devices+0x9c/0x128 [c000000000077b98] .handle_eeh_events+0x2d8/0x4b0 [c0000000000782d0] .eeh_event_handler+0x130/0x1c0 [c000000000022bd4] .kernel_thread+0x54/0x70 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7a20efb0 |
|
31-Mar-2015 |
Richard Cochran <richardcochran@gmail.com> |
ptp: tg3: use helpers for converting ns to timespec. This patch changes the driver to use ns_to_timespec64() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f578b418 |
|
29-Mar-2015 |
Richard Cochran <richardcochran@gmail.com> |
ptp: tg3: convert to the 64 bit get/set time methods. The device appears to use a 64 bit nanoseconds register, and so with this patch the driver should be ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
24d2e4a5 |
|
05-Mar-2015 |
Eric Dumazet <edumazet@google.com> |
tg3: use napi_complete_done() Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. Tested: lpx:~# echo 0 >/sys/class/net/eth1/gro_flush_timeout lpx:~# sar -n DEV 1 10 | grep eth1 10:36:25 AM eth1 81290.00 40617.00 120479.67 2777.01 0.00 0.00 0.00 10:36:26 AM eth1 81283.00 40608.00 120481.81 2778.13 0.00 0.00 1.00 10:36:27 AM eth1 81304.00 40639.00 120518.42 2778.28 0.00 0.00 0.00 10:36:28 AM eth1 81255.00 40605.00 120437.34 2775.95 0.00 0.00 1.00 10:36:29 AM eth1 81306.00 40630.00 120521.44 2777.70 0.00 0.00 0.00 10:36:30 AM eth1 81286.00 40564.00 120480.20 2773.31 0.00 0.00 0.00 10:36:31 AM eth1 81256.00 40599.00 120438.81 2776.27 0.00 0.00 0.00 10:36:32 AM eth1 81287.00 40594.00 120480.69 2776.69 0.00 0.00 0.00 10:36:33 AM eth1 81279.00 40601.00 120478.53 2775.84 0.00 0.00 0.00 10:36:34 AM eth1 81277.00 40610.00 120476.94 2776.25 0.00 0.00 0.00 Average: eth1 81282.30 40606.70 120479.39 2776.54 0.00 0.00 0.20 lpx:~# echo 13000 >/sys/class/net/eth1/gro_flush_timeout lpx:~# sar -n DEV 1 10 | grep eth1 10:36:43 AM eth1 81257.00 7747.00 120437.44 530.00 0.00 0.00 0.00 10:36:44 AM eth1 81278.00 7748.00 120480.00 529.85 0.00 0.00 0.00 10:36:45 AM eth1 81282.00 7752.00 120479.09 531.09 0.00 0.00 0.00 10:36:46 AM eth1 81282.00 7751.00 120478.80 530.90 0.00 0.00 0.00 10:36:47 AM eth1 81276.00 7745.00 120478.31 529.64 0.00 0.00 0.00 10:36:48 AM eth1 81278.00 7747.00 120478.50 529.81 0.00 0.00 0.00 10:36:49 AM eth1 81282.00 7749.00 120478.88 530.01 0.00 0.00 0.00 10:36:50 AM eth1 81284.00 7751.00 120481.52 530.20 0.00 0.00 0.00 10:36:51 AM eth1 81299.00 7769.00 120481.74 533.81 0.00 0.00 0.00 10:36:52 AM eth1 81281.00 7748.00 120478.62 529.96 0.00 0.00 0.00 Average: eth1 81279.90 7750.70 120475.29 530.53 0.00 0.00 0.00 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d0af71a3 |
|
11-Feb-2015 |
Jun'ichi Nomura \(NEC\) <j-nomura@ce.jp.nec.com> |
tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() tg3_init_one() calls tg3_halt() without tp->lock despite its assumption and causes deadlock. If lockdep is enabled, a warning like this shows up before the stall: [ BUG: bad unlock balance detected! ] 3.19.0test #3 Tainted: G E ------------------------------------- insmod/369 is trying to release lock (&(&tp->lock)->rlock) at: [<ffffffffa02d5a1d>] tg3_chip_reset+0x14d/0x780 [tg3] but there are no more locks to release! tg3_init_one() doesn't call tg3_halt() under normal situation but during kexec kdump I hit this problem. Fixes: 932f19de ("tg3: Release tp->lock before invoking synchronize_irq()") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
932f19de |
|
14-Jan-2015 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Release tp->lock before invoking synchronize_irq() synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
db84bf43 |
|
14-Jan-2015 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: tg3_reset_task() needs to use rtnl_lock to synchronize Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4fd190a9 |
|
14-Jan-2015 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df8a39de |
|
13-Jan-2015 |
Jiri Pirko <jiri@resnulli.us> |
net: rename vlan_tx_* helpers since "tx" is misleading there The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
20d14a5d |
|
08-Jan-2015 |
Ivan Vecera <ivecera@redhat.com> |
tg3: move init/deinit from open/close to probe/remove Move init and deinit of PTP support from open/close functions to probe/remove funcs to avoid removing/re-adding of associated PTP device(s) during ifup/ifdown. v2: tg3_ptp_init call moved to correct place (thx. Prashant) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
05b0aa57 |
|
20-Dec-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
892311f6 |
|
02-Dec-2014 |
Eyal Perry <eyalpe@mellanox.com> |
ethtool: Support for configurable RSS hash function This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a620a6bc |
|
25-Nov-2014 |
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> |
tg3: fix ring init when there are more TX than RX channels If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
39648356 |
|
16-Nov-2014 |
Eric Dumazet <edumazet@google.com> |
tg3: use netdev_rss_key_fill() helper Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2c7c9ea4 |
|
13-Oct-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Add skb->xmit_more support Ring TX doorbell only if xmit_more is not set or the queue is stopped. Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d3083ee |
|
30-Sep-2014 |
Vlad Yasevich <vyasevich@gmail.com> |
tg3: Allow for recieve of full-size 8021AD frames When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
476c1885 |
|
18-Sep-2014 |
Vlad Yasevich <vyasevich@gmail.com> |
tg3: Work around HW/FW limitations with vlan encapsulated frames TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0486a063 |
|
01-Sep-2014 |
Ivan Vecera <ivecera@redhat.com> |
tg3: prevent ifup/ifdown during PCI error recovery The patch fixes race conditions between PCI error recovery callbacks and potential ifup/ifdown. First, if ifup (tg3_open) is called between tg3_io_error_detected() and tg3_io_resume() then tp->timer is armed twice before expiry. Once during tg3_open() and again during tg3_io_resume(). This results in BUG at kernel/time/timer.c:945. Second, if ifdown (tg3_close) is called between tg3_io_error_detected() and tg3_io_resume() then tg3_napi_disable() is called twice without a tg3_napi_enable between. Once during tg3_io_error_detected() and again during tg3_close(). The tg3_io_resume() then hangs on rtnl_lock(). v2: Added logging messages per Prashant's request Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7b31b4de |
|
13-Aug-2014 |
Govindarajulu Varadarajan <_govind@gmx.com> |
tg3: fix return value in tg3_get_stats64 When tp->hw_stats is 0, tg3_get_stats64 should display previously recorded stats. So it returns &tp->net_stats_prev. But the caller, dev_get_stats, ignores the return value. Fix this by assigning tp->net_stats_prev to stats and returning stats. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9baa3c34 |
|
08-Aug-2014 |
Benoit Taine <benoit.taine@lip6.fr> |
PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
4d8fdc95 |
|
05-Aug-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Modify tg3_tso_bug() to handle multiple TX rings tg3_tso_bug() was originally designed to handle only HW TX ring 0, Commit d3f6f3a1d818410c17445bce4f4caab52eb102f1 ("tg3: Prevent page allocation failure during TSO workaround") changed the driver logic to use tg3_tso_bug() for all HW TX rings that are enabled. This patch fixes the regression by modifying tg3_tso_bug() to handle multiple HW TX rings. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
66c965f5 |
|
21-Jun-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Change nvram command timeout value to 50ms Commit 506724c463fcd63477a5e404728a980b71f80bb7 "tg3: Override clock, link aware and link idle mode during NVRAM dump" changed the timeout value for nvram command execution from 100ms to 1ms. But the 1ms timeout value was only sufficient for nvram read operations but not write operations for most of the devices supported by tg3 driver. This patch sets the MAX to 50ms. Also it uses usleep_range instead of udelay. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
40c1deaf |
|
18-Jun-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Clear NETIF_F_TSO6 flag before doing software GSO Commit d3f6f3a1d818410c17445bce4f4caab52eb102f1 ("tg3: Prevent page allocation failure during TSO workaround") modified driver logic to use tg3_tso_bug() for any TSO fragment that hits hardware bug conditions thus the patch increased the scope of work for tg3_tso_bug() to cover devices that support NETIF_F_TSO6 as well. Prior to the patch, tg3_tso_bug() would only be used on devices supporting NETIF_F_TSO. A regression was introduced for IPv6 packets requiring the workaround. To properly perform GSO on SKBs with TCPV6 gso_type, we need to call skb_gso_segment() with NETIF_F_TSO6 feature flag cleared, or the function will return NULL and cause a kernel oops as tg3 is not handling a NULL return value. This patch fixes the problem. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fe62d001 |
|
14-May-2014 |
Ben Hutchings <ben@decadent.org.uk> |
ethtool: Replace ethtool_ops::{get,set}_rxfh_indir() with {get,set}_rxfh() ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
#
506724c4 |
|
24-May-2014 |
Prashant Sreedharan <prashant@broadcom.com> |
tg3: Override clock, link aware and link idle mode during NVRAM dump When cable is not present the clock speed of some of the devices is reduced based upon power saving mode setting in NVRAM. Due to this NVRAM reads take long time to complete as a result CPU soft lockup message is seen. Fix is to override clock, disable link aware and link idle modes before NVRAM reads and restore them back after the reads are complete. During this period also check if the thread needs to be rescheduled and if there are any signals to handle. Also decrease the NVRAM command execution timeout value to 1ms. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
de750e4c |
|
11-May-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Update copyright and version to 3.137 Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3f6f3a1 |
|
11-May-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Prevent page allocation failure during TSO workaround If any TSO fragment hits hardware bug conditions (e.g. 4G boundary), the driver will workaround by calling skb_copy() to copy to a linear SKB. Users have reported page allocation failures as the TSO packet can be up to 64K. Copying such a large packet is also very inefficient. We fix this by using existing tg3_tso_bug() to transmit the packet using GSO. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d71c0dc4 |
|
11-May-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Don't modify ip header fields when doing GSO tg3 uses GSO as workaround if the hardware cannot perform TSO on certain packets. We should not modify the ip header fields if we do GSO on the packet. It happens to work by accident because GSO recalculates the IP checksum and IP total length. Also fix the tg3_start_xmit comment to reflect that this is the only xmit function for all devices. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ba67b510 |
|
17-Apr-2014 |
Ivan Vecera <ivecera@redhat.com> |
tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled The patch fixes a problem with dropped jumbo frames after usage of 'ethtool -G ... rx'. Scenario: 1. ip link set eth0 up 2. ethtool -G eth0 rx N # <- This zeroes rx-jumbo 3. ip link set mtu 9000 dev eth0 The ethtool command set rx_jumbo_pending to zero so any received jumbo packets are dropped and you need to use 'ethtool -G eth0 rx-jumbo N' to workaround the issue. The patch changes the logic so rx_jumbo_pending value is changed only if jumbo frames are enabled (MTU > 1500). Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
105dcb59 |
|
28-Mar-2014 |
françois romieu <romieu@fr.zoreil.com> |
tg3: remove open-coded skb_cow_head. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7427440b |
|
26-Mar-2014 |
Florian Fainelli <f.fainelli@gmail.com> |
tg3: remove empty MDIO bus reset function tg3_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
51dfe7b9 |
|
24-Mar-2014 |
Vlad Yasevich <vyasevic@redhat.com> |
tg3: Do not include vlan acceleration features in vlan_features Including hardware acceleration features in vlan_features breaks stacked vlans (Q-in-Q) by marking the bottom vlan interface as capable of acceleration. This causes one of the tags to be lost and the packets are sent with a sing vlan header. CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4986b4f0 |
|
20-Mar-2014 |
Richard Cochran <richardcochran@gmail.com> |
ptp: drivers: set the number of programmable pins. This patch updates the many PTP Hardware Clock drivers with the newly introduced field that advertises the number of programmable pins. Some of these devices do have programmable pins, but the implementation will have to wait for follow on patches. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
497a27b9 |
|
11-Mar-2014 |
Eric W. Biederman <ebiederm@xmission.com> |
tg3: Call dev_kfree_skby_any instead of dev_kfree_skb. Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d7b95315 |
|
28-Feb-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Don't check undefined error bits in RXBD Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6f1f411a |
|
18-Feb-2014 |
Alexander Gordeev <agordeev@redhat.com> |
tg3: Use pci_enable_msix_range() instead of pci_enable_msix() As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c6993dfd |
|
06-Feb-2014 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Fix deadlock in tg3_change_mtu() Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c6e27f2f |
|
05-Feb-2014 |
Dan Carpenter <dan.carpenter@oracle.com> |
tg3: cleanup an error path in tg3_phy_reset_5703_4_5() In the original code, if tg3_readphy() fails then it does an unnecessary check to verify "err" is still zero and then returns -EBUSY. My static checker complains about the unnecessary "if (!err)" check and anyway it is better to propagate the -EBUSY error code from tg3_readphy() instead of hard coding it here. And really the original code is confusing to look at. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a81ab36b |
|
08-Jan-2014 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
drivers/net: delete non-required instances of include <linux/init.h> None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
20170e77 |
|
03-Jan-2014 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.136 Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1743b83c |
|
03-Jan-2014 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Poll cpmu link state on APE + ASF enabled devices On ASF enabled devices where the mgmt firmware runs on the application processing engine, there is a race between the tg3 driver processing a link change event and the ASF firmware clearing the link changed bit in the EMAC status register. This leads to link notifications to the driver sometimes getting lost. Poll the CPMU link state as a backup for the normal interrupt path update if ASF is enabled. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f82995b6 |
|
03-Jan-2014 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Set the MAC clock to the fastest speed during boot code load On the 5717, 5718 and 5719 devices, the bootcode runs slower when any port doesn't have a link due to clock speed slowing down as part of the link-aware feature. This leads to the driver timing out waiting for the bootcode signature. This patch overrides the clock policy to the highest frequency just before reset and restores it after the bootcode is up. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e565eec3 |
|
03-Jan-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Add unicast filtering support. Up to 3 additional unicast addresses can be added to the perfect match filter table. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f022ae62 |
|
03-Jan-2014 |
Michael Chan <mchan@broadcom.com> |
tg3: Refactor __tg3_set_mac_addr() so that individual MAC address filter entries can be set. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
37567910 |
|
19-Dec-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Expand 4g_overflow_test workaround to skb fragments of any size. The current driver assumes that an skb fragment can only be upto jumbo size. Presumably this was a fast-path optimization. This assumption is no longer true as fragments can be upto 32k. v2: Remove unnecessary parantheses per Eric Dumazet. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
388d3335 |
|
09-Dec-2013 |
Nat Gurumoorthy <natg@google.com> |
tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0 The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
941c2253 |
|
06-Dec-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.135 Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
94962f7f |
|
06-Dec-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Expand multicast drop counter miscounting fix to 5762 commit 4d95847381228639844c7197deb8b2211274ef22 - "tg3: Workaround rx_discards stat bug", added a workaround for miscounted statistics for multicast packets. This fix needs to be applied to the 5762. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7c786065 |
|
06-Dec-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add flag to disable 1G Half Duplex advertisement Some link partners have issues if the non-standard 1G half duplex is advertised. This patch adds support for an nvram setting to disable the advertisement. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ec99f76d |
|
06-Dec-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Don't add rxbds_empty to rx_over_errors rxbds_empty is an informational statistic signifying that a ring full condition was observed. It does not mean an overflow has occurred. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8496e85c |
|
30-Nov-2013 |
Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
PCI / tg3: Give up chip reset and carrier loss handling if PCI device is not present Modify tg3_chip_reset() and tg3_close() to check if the PCI network adapter device is accessible at all in order to skip poking it or trying to handle a carrier loss in vain when that's not the case. Introduce a special PCI helper function pci_device_is_present() for this purpose. Of course, this uncovers the lack of the appropriate RTNL locking in tg3_suspend() and tg3_resume(), so add that locking in there too. These changes prevent tg3 from burning a CPU at 100% load level for solid several seconds after the Thunderbolt link is disconnected from a Matrox DS1 docking station. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a2f4dfba |
|
22-Nov-2013 |
Guenter Roeck <linux@roeck-us.net> |
tg3: Convert to use hwmon_device_register_with_groups Use new hwmon API to simplify code, provide missing mandatory 'name' sysfs attribute, and attach hwmon attributes to hwmon device instead of pci device. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7260899b |
|
18-Nov-2013 |
Ben Hutchings <bhutchings@solarflare.com> |
tg3: Implement the SIOCGHWTSTAMP ioctl While we're doing this, fix the error code for SIOCSHWTSTAMP ioctl on non-timestamping hardware. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
#
58b187c6 |
|
13-Nov-2013 |
Ben Hutchings <bhutchings@solarflare.com> |
tg3: Validate hwtstamp_config completely before applying it tg3_hwtstamp_ioctl() should validate all fields of hwtstamp_config before making any changes. Currently it sets the TX configuration before validating the rx_filter field. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
85aec73d |
|
06-Nov-2013 |
Ivan Vecera <ivecera@redhat.com> |
tg3: avoid double-freeing of rx data memory If build_skb fails the memory associated with the ring buffer is freed but the ri->data member is not zeroed in this case. This causes a double-free of this memory in tg3_free_rings->... path. The patch moves this block after setting ri->data to NULL. It would be nice to fix this bug also in stable >= v3.4 trees. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4fc76e6f |
|
17-Oct-2013 |
Jingoo Han <jg1.han@samsung.com> |
net: tg3: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d458cdf7 |
|
01-Oct-2013 |
Joe Perches <joe@perches.com> |
net:drivers/net: Miscellaneous conversions to ETH_ALEN Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ee002b64 |
|
28-Sep-2013 |
Hauke Mehrtens <hauke@hauke-m.de> |
tg3: use phylib when robo switch is in use When a switch is connected as a PHY to the MAC driven by tg3, use phylib and provide the phy address to tg3 from the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ead2402c |
|
28-Sep-2013 |
Hauke Mehrtens <hauke@hauke-m.de> |
tg3: add support a phy at an address different than 01 When phylib was in use tg3 only searched at address 01 on the mdio bus and did not work with any other address. On the BCM4705 SoCs the switch is connected as a PHY behind the MAC driven by tg3 and it is at PHY address 30 in most cases. This is a preparation patch to allow support for such switches. phy_addr is set to TG3_PHY_MII_ADDR for all devices, which are using phylib, so this should not change any behavior. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e4cb29fa |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.134 Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cb04be4d |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove unnecessary spinlock The spinlock is not needed after conversion of tg3_flags from array to set_bit(). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
21e315e1 |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Appropriately classify interrupts during request_irq Distinguish between tx, rx and txrx interrupts. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4bc814ab |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove redundant if check Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
db79e1e9 |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove if 0'd code Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
89f67978 |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: LED in shared mode does not blink during traffic On the 5717, 5719, 5720 and 5762 devices, in shared link/activity mode, the blink rate must be overridden with all bits set. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
68273712 |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add support for new 577xx device ids This patch adds support for 57764, 57765, 57787, 57782 and 57786 devices. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3ab71071 |
|
20-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add function tg3_phy_shdw_write() For consistency with other register access functions, add shadow register access function of the type (register/val). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0319f30e |
|
11-Sep-2013 |
Jon Mason <jdmason@kudzu.us> |
tg3: Use pci_dev pm_cap Use the already existing pm_cap variable in struct pci_dev for determining the power management offset. This saves the driver from having to keep track of an extra variable. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
300cf9b9 |
|
12-Sep-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Expand led off fix to include 5720 Commit 989038e217e94161862a959e82f9a1ecf8dda152 ("tg3: Don't turn off led on 5719 serdes port 0") added code to skip turning led off on port 0 of the 5719 since it powered down other ports. This workaround needs to be enabled on the 5720 as well. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
989038e2 |
|
30-Aug-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Don't turn off led on 5719 serdes port 0 Turning off led on port 0 of the 5719 serdes causes all other ports to lose power and stop functioning. Add tg3_phy_led_bug() function to check for this condition. We use a switch() in tg3_phy_led_bug() for consistency with the tg3_phy_power_bug() function. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ede23fa8 |
|
26-Aug-2013 |
Joe Perches <joe@perches.com> |
drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherent __GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
68293099 |
|
13-Aug-2013 |
Daniel Borkmann <daniel@iogearbox.net> |
net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset Commit d8af4dfd8 ("net/tg3: Fix kernel crash") introduced a possible NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev) condition is met and netdev is NULL. Then, the jump to the 'done' label calls dev_close() with a netdevice that is NULL. Therefore, only call dev_close() when we have a netdevice, but one that is not running. [ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin Nayak Sujir ] Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0f847584 |
|
08-Aug-2013 |
Yijing Wang <wangyijing@huawei.com> |
tg3: clean up unnecessary MSI/MSI-X capability find PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cd77b2eb |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.133 Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
378b72c8 |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Fix UDP fragments treated as RMCP The 5762 devices sometimes incorrectly treat udp fragments as RMCP packets and route to the APE. This patch sets the RX_MODE_IPV4_FRAG_FIX bit for these devices which enables the proper behaviour. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
92e6457d |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Enable support for timesync gpio output The PTP_CAPABLE tg3 devices have a gpio output that is toggled when the free running counter matches a watchdog value. This patch adds support to set the watchdog and enable this feature. Since the output is controlled via bits in the EAV_REF_CLCK_CTL register, we have to read-modify-write it when we stop/resume. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4c305fa2 |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Implement the shutdown handler Also remove the call to tg3_power_down_prepare() in tg3_power_down() since tg3_close() calls it. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5137a2ee |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Allow NVRAM programming when interface is down Previously, when the interface was brought down, the driver would set the power state to D3hot. In D3hot, we don't have access to the NVRAM. This patch removes the call to set the power state to PCI_D3hot in close. A following patch will implement the shutdown handler to properly set the D3hot state when the system is going down. Doing the above means that the TG3_PHYFLG_IS_LOW_POWER should not be checked to validate access to the NVRAM. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c1459356 |
|
29-Jul-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove incorrect switch to aux power During probe, the driver is incorrectly switching the power to Vaux on the 5717 and later devices. At this point, we are in D0 state and drawing maximum power. We also definitely have Vmain available. It doesn't make sense to switch to Vaux since it has a lesser maximum power draw and we might go over the limit. On a new system, we observe that not all ports are recognized in some of the slots with this call in place. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c80dc13d |
|
24-Jul-2013 |
Gavin Shan <shangw@linux.vnet.ibm.com> |
net/tg3: Fix warning from pci_disable_device() The patch fixes following warning. The PCI device might have been disabled somewhere else when we have EEH errors during early stage. Device tg3 disabling already-disabled device WARNING: at drivers/pci/pci.c:1403 : NIP [c00000000044fd5c] .pci_disable_device+0xcc/0xe0 LR [c00000000044fd58] .pci_disable_device+0xc8/0xe0 Call Trace: [c000003f80bc7370] [c00000000044fd58] .pci_disable_device+0xc8/0xe0 [c000003f80bc73f0] [d00000001cfe8fc0] .tg3_init_one+0x2f0/0x19f0 [tg3] [c000003f80bc74d0] [c0000000004534e8] .local_pci_probe+0x68/0xb0 [c000003f80bc7560] [c0000000004537c8] .pci_device_probe+0x198/0x1a0 [c000003f80bc7610] [c0000000004f9e98] .driver_probe_device+0xd8/0x450 [c000003f80bc76a0] [c0000000004fa3bc] .__driver_attach+0x10c/0x110 [c000003f80bc7730] [c0000000004f6e94] .bus_for_each_dev+0x94/0x100 [c000003f80bc77d0] [c0000000004f9634] .driver_attach+0x34/0x50 [c000003f80bc7850] [c0000000004f8f98] .bus_add_driver+0x288/0x380 [c000003f80bc78f0] [c0000000004fae2c] .driver_register+0x9c/0x200 [c000003f80bc7980] [c000000000453214] .__pci_register_driver+0x64/0x90 [c000003f80bc7a10] [d00000001cff7a60] .tg3_driver_init+0x2c/0x40 [tg3] [c000003f80bc7a80] [c00000000000b424] .do_one_initcall+0x144/0x1f0 [c000003f80bc7b70] [c0000000001244a0] .load_module+0x1f30/0x2700 [c000003f80bc7d40] [c000000000124e80] .SyS_finit_module+0xc0/0x110 [c000003f80bc7e30] [c000000000009dd4] syscall_exit+0x0/0x98 Reported-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d8af4dfd |
|
24-Jul-2013 |
Gavin Shan <shangw@linux.vnet.ibm.com> |
net/tg3: Fix kernel crash While EEH error happens, we might not have network device instance (struct net_device) yet. So we can't access the instance safely and check its link state, which causes kernel crash. The patch fixes it. EEH: Frozen PE#2 on PHB#3 detected EEH: This PCI device has failed 1 times in the last hour EEH: Notify device drivers to shutdown (NULL net_device): PCI I/O error detected Unable to handle kernel paging request for data at address 0x00000048 Faulting instruction address: 0xd00000001c9387a8 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA PowerNV : NIP [d00000001c9387a8] .tg3_io_error_detected+0x78/0x2a0 [tg3] LR [d00000001c9387a4] .tg3_io_error_detected+0x74/0x2a0 [tg3] Call Trace: [c000003f93a0f960] [d00000001c9387a4] .tg3_io_error_detected+0x74/0x2a0 [tg3] [c000003f93a0fa30] [c00000000003844c] .eeh_report_error+0xac/0x120 [c000003f93a0fac0] [c0000000000371bc] .eeh_pe_dev_traverse+0x8c/0x150 [c000003f93a0fb60] [c000000000038858] .eeh_handle_normal_event+0x128/0x3d0 [c000003f93a0fbf0] [c000000000038db8] .eeh_handle_event+0x2b8/0x2c0 [c000003f93a0fc90] [c000000000038e80] .eeh_event_handler+0xc0/0x170 [c000003f93a0fd30] [c0000000000cc000] .kthread+0xf0/0x100 [c000003f93a0fe30] [c00000000000a0dc] .ret_from_kernel_thread+0x5c/0x80 Reported-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6d446ec3 |
|
25-Jun-2013 |
Gavin Shan <shangw@linux.vnet.ibm.com> |
net/tg3: Avoid delay during MMIO access When the EEH error is the result of a fenced host bridge, MMIO accesses can be very slow (milliseconds) to timeout and return all 1's, thus causing the driver various timeout loops to take way too long and trigger soft-lockup warnings (in addition to taking minutes to recover). It might be worthwhile to check if for any of these cases, ffffffff is a valid possible value, and if not, bail early since that means the HW is either gone or isolated. In the meantime, checking that the PCI channel is offline would be workaround of the problem. Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
72bb72b0 |
|
17-Jun-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Prevent system hang during repeated EEH errors. The current tg3 code assumes the pci_error_handlers to be always called in sequence. In particular, during ->error_detected(), NAPI is disabled and the device is shutdown. The device is later reset and NAPI re-enabled in ->slot_reset() and ->resume(). In EEH, if more than 6 errors are detected in a hour, only ->error_detected() will be called. This will leave the driver in an inconsistent state as NAPI is disabled but netif_running state is still true. When the device is later closed, we'll try to disable NAPI again and it will loop forever. We fix this by closing the device if we encounter any error conditions during the normal sequence of the pci_error_handlers. v2: Remove the changes in tg3_io_resume() based on Benjamin Poirier's feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
df465abf |
|
12-Jun-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Wait for boot code to finish after power on Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9bc297ea |
|
03-Jun-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add read dma workaround for 5720 Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5865fc1b |
|
02-Jun-2013 |
Yijing Wang <wangyijing@huawei.com> |
tg3: remove redundant pm init code Pci_enable_device() will set device pm state to D0, so it's no need to do it again in tg3_init_one(). Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f2068b80 |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove unnecessary lock around tg3_flag_set The spinlock was needed when flags used to be a u32 and set/cleared using bit operations. Now that we use the atomic set_bit, this lock isn't needed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7c10ee32 |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Fix misplaced empty line Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4a5f46f2 |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Use descriptive label names in tg3_start Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
328947ff |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Make tg3_rings_reset() more concise Simplify the rings reset function and increase readability by moving the control block disable code into separate functions. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
32ba19ef |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Simplify ring control block setup The current code calls tg3_set_bdinfo() separately on napi0, followed by a loop that does napi1+. Simplify it by setting bdinfo in the loop for all napi contexts. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2e460fc0 |
|
23-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Split APE driver state change out of boot reset signature update Unlike the boot signature that needs to be set before every reset, the ape state only needs to be updated to tell the firmware that the driver is now taking/releasing control of the hardware. Move the calls to tg3_ape_driver_state_change() to better, more appropriate places. Also, the firmware does not distinguish between SUSPEND and START states anymore. Remove the SUSPEND case in the switch. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c2bba067 |
|
20-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.132 Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb03a43f |
|
20-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Ensure boot code has completed initialization before accessing hardware After resetting the device, the driver waits for a signature to be updated to know that firmware has completed initialization. However, the call to tg3_poll_fw() is being done too late and we're writing to the GRC_MODE register before it has completely initialized, causing contention with firmware. This logic has existed since day one but is causing PCIE link to go down randomly at startup on one platform once every few hundred reboots. Move the tg3_poll_fw() up to before we write to the GRC_MODE register after reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8dbb0dc2 |
|
20-May-2013 |
Peter Hüwe <PeterHuewe@gmx.de> |
net/ethernet/broadcom/tg3: Use module_pci_driver to register driver Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1cbf9eb8 |
|
18-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Implement set/get_eee handlers Reviewed-by: Ben Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b6c273a |
|
18-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Simplify tg3_phy_eee_config_ok() by reusing tg3_eee_pull_config() eee_config_ok() was checking only for mismatch in advertised settings. This patch expands the scope of eee_config_ok() to check for mismatch in the other eee settings. On mismatch we will require a call to tg3_setup_eee() to push the configured settings to the hardware. Reviewed-by: Ben Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
400dfbaa |
|
18-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add tg3_eee_pull_config() function Add tg3_eee_pull_config() to pull the settings from the hardware and populate the eee structure. If Link Flap Avoidance is enabled, we pull the eee settings from the hw so as not to cause a phy reset on eee config mismatch later. This requires moving down tg3_setup_eee() below the tg3_pull_config() to not trample existing settings. Reviewed-by: Ben Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e2ecbeb |
|
18-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add ethtool_eee struct and tg3_setup_eee() Add an eee structure and update it with eee settings. This will be used for set/get_eee operations. Add common function tg3_setup_eee() that will be used in the subsequent patches. Reviewed-by: Ben Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0f0d1510 |
|
13-May-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix data corruption on 5725 with TSO The 5725 family of devices (asic rev 5762), corrupts TSO packets where the buffer is within MSS bytes of a 4G boundary (4G, 8G etc.). Detect this condition and trigger the workaround path. Cc: <stable@vger.kernel.org> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
44f3b503 |
|
13-May-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Skip powering down function 0 on certain serdes devices On the 5718, 5719 and 5720 serdes devices, powering down function 0 results in all the other ports being powered down. Add code to skip function 0 power down. v2: - Modify tg3_phy_power_bug() function to use a switch instead of a complicated if statement. Suggested by Joe Perches. Cc: <stable@vger.kernel.org> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
32e19272 |
|
30-Apr-2013 |
Flavio Leitner <fbl@redhat.com> |
tg3: fix to append hardware time stamping flags The commit f233a976ad15c3b8c54c0157f3c41d23f7514279 (tg3: shows HW time stamping support only if ptp_capable is present) didn't append hardware flags correctly. This patch fixes it. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f233a976 |
|
29-Apr-2013 |
Flavio Leitner <fbl@redhat.com> |
tg3: shows HW time stamping support only if ptp_capable is present Current tg3 shows hardware timestamping support for all devices when that is true only for the hardware with PTP_CAPABLE flag present. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
86a9bad3 |
|
18-Apr-2013 |
Patrick McHardy <kaber@trash.net> |
net: vlan: add protocol argument to packet tagging functions Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f646968f |
|
18-Apr-2013 |
Patrick McHardy <kaber@trash.net> |
net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_* Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
42df36a6 |
|
16-Apr-2013 |
Fabio Estevam <fabio.estevam@freescale.com> |
tg3: Remove unneeded PM_OPS definitions SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
953c96e0 |
|
09-Apr-2013 |
Joe Perches <joe@perches.com> |
tg3: Use bool not int Using bool can make code more readable. Convert uses and tests of int to bool. This also makes a comparison of tg3->link_up (itself bool) a bool comparison instead of int. Reorder stack variable declarations to make bool fit declaration holes where appropriate. $ size drivers/net/ethernet/broadcom/tg3.o* text data bss dec hex filename 169958 27249 58896 256103 3e867 drivers/net/ethernet/broadcom/tg3.o.new 169968 27249 58896 256113 3e871 drivers/net/ethernet/broadcom/tg3.o.old Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7a28fdeb |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update version to 3.131 Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ed1ff5c3 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Reset the phy to allow modified EEE settings to take effect When LFA is enabled, we don't reset the phy. But EEE settings changes don't take effect until the phy is reset. Add a phy reset when we detect a changed EEE setting. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fdad8de4 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Pull the phy advertised speed and flow control settings on driver load Normally on driver load, we set the default settings for speed and flow control. However, if the default setting is not compatible with the current link state, we would autonegotiate and cause a link flap. To avoid this, we pull the current advertised settings into the config. A second scenario is if a user changes the speed/duplex/fc settings when the interface is down. In this case we must not pull the settings from the phy and overwrite user settings. We avoid that by checking the USER_CONFIGURED flag. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
942d1af0 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add support for link flap avoidance This patch and the following two patches add support for link flap avoidance by maintaining the link on power down. This feature is required for management capable devices to have the management connection uninterrupted on driver reload, reboot and interface up/down. The other pros of this feature are - It speeds up boot up time by several seconds as DHCP addresses can be acquired faster. - It avoids lengthy Spanning Tree delay. On powerup the hardware brings up the phy with default settings. If the link is not up, the management software configures the phy to gigabit and starts autonegotiate. Subsequently, as long as the link is up, the driver and management refrain from resetting and/or changing any configuration that the link depends on. The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is disabled by default. If this setting is enabled, we skip powering down the phy and resetting it. A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds support for gigabit link speed when device is on auxiliary power. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
85730a63 |
|
09-Apr-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Add SGMII phy support for 5719/5718 serdes Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3310e248 |
|
09-Apr-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Add tg3_clear_mac_status() common function Refactor for use in the next patch that adds sgmii phy support. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ce20f161 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Add a warning during link settings change if mgmt enabled When the user executes certain ethtool commands such as -s, -A, -G, -L, -r a phy reset or autonegotiate is performed which results in management traffic being interrupted. Add a warning in these cases. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f1315d20 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Remove unnecessary phy reset during ethtool commands The current code unnecessarily resets the phy when we use ethtool to change the ring parameters or flow control settings. Remove the phy reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f6334bb8 |
|
09-Apr-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix NVRAM size detection for the STM45PE20 pinstrap on 5762 devices The STM45PE20 pinstrap on 5762 devices supports multiple sizes. So treat it just like the ST45_USPT and the size will be read from 0xf0 via tg3_get_nvram_size(). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f0fcd7a9 |
|
09-Apr-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Fix flow control settings not propagated to hardware In tg3_setup_copper_phy(), if autonegotiation is disabled, we need to relink only if the speed or duplex does not match the configured setting. If flow control does not match, a relink is not necessary as flow control is not a PHY setting. Later on, we'll call tg3_setup_flow_ctrl() to set up the MAC to the desired flow control settings if we're in full duplex mode. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
715230a4 |
|
27-Mar-2013 |
Kees Cook <keescook@chromium.org> |
tg3: fix length overflow in VPD firmware parsing Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version when present") introduced VPD parsing that contained a potential length overflow. Limit the hardware's reported firmware string length (max 255 bytes) to stay inside the driver's firmware string length (32 bytes). On overflow, truncate the formatted firmware string instead of potentially overwriting portions of the tg3 struct. http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Oded Horovitz <oded@privatecore.com> Reported-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1f9061d2 |
|
15-Mar-2013 |
Joe Perches <joe@perches.com> |
drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0) Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7c6cdead |
|
12-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: 5715 does not link up when autoneg off Commit d13ba512cbba7de5d55d7a3b2aae7d83c8921457 ("tg3: Remove SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by removing some dead code. One effect of this change was that the advertisement register would not be updated if autoneg is turned off. This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults to advertise only 10Mb Full duplex. But with autoneg disabled, it needs the configured speed enabled in the advertisement register to link up. This patch adds the work around to advertise all speeds on the 5715 when autoneg is disabled. Reported-by: Marcin Miotk <marcinmiotk81@gmail.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
84421b99 |
|
08-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Update link_up flag for phylib devices Commit f4a46d1f46a8fece34edd2023e054072b02e110d introduced a bug where the ifconfig stats would remain 0 for phylib devices. This is due to tp->link_up flag never becoming true causing tg3_periodic_fetch_stats() to return. The link_up flag was being updated in tg3_test_and_report_link_chg() after setting up the phy. This function however, is not called for phylib devices since the driver does not do the phy setup. This patch moves the link_up flag update into the common tg3_link_report() function that gets called for phylib devices as well for non phylib devices when the link state changes. To avoid updating link_up twice, we replace tg3_carrier_...() calls that are followed by tg3_link_report(), with netif_carrier_...(). We can then remove the unused tg3_carrier_on() function. CC: <stable@vger.kernel.org> Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c4dab506 |
|
06-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Download 57766 EEE service patch firmware This patch downloads the EEE service patch firmware and enables the necessary EEE flags. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
31f11a95 |
|
06-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Enhance firmware download code to support fragmented firmware This lays the ground work to download the 57766 fragmented firmware. We loop until we've written data equal to tp->fw->size minus headers. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
77997ea3 |
|
06-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Cleanup firmware parsing code The current firmware header parsing is complicated due to interpreting it as a u32 array and accessing header members via array offsets. Add tg3_firmware_hdr structure to access the firmware fields instead of hardcoding offsets. The same header format will be used for individual firmware fragments in the 57766. The fw_hdr and tg3 structures have all the information required for loading the fw. Remove the redundant fw_info structure and pass fw_hdr instead. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4bffb28 |
|
06-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Refactor the 2nd type of cpu pause For completeness and consistency, add common function tg3_pause_cpu_and_set_pc(). This is only for existing fw and not used for the 57766. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
837c45bb |
|
06-Mar-2013 |
Nithin Sujir <nsujir@broadcom.com> |
tg3: Refactor cpu pause/resume code The 57766 rxcpu needs to be paused/resumed when we download the firmware just like we do for existing firmware. Refactor the pause/resume code to be reusable. This patch also renames the "offset" argument of tg3_halt_cpu to "cpu_base" since that's what it really is. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1caf13eb |
|
06-Mar-2013 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add new FW_TSO flag tg3 used the fw_needed member loosely as a synonym for firmware TSO. Now that the 57766 needs firmware download support, fw_needed can no longer be used like this. This patch creates a new FW_TSO flag and changes the code to use it. Also rearrange all the TSO flags together in the enum. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4153577a |
|
16-Feb-2013 |
Joe Perches <joe@perches.com> |
tg3: Use different macros for pci_chip_rev_id accesses Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_<foo> attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
717ff727 |
|
16-Feb-2013 |
Joe Perches <joe@perches.com> |
tg3: Remove define and single use of GET_CHIP_REV_ID It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_<foo> tests the same. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d887199d |
|
13-Feb-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Update version to 3.130 Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
402e1398 |
|
13-Feb-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Set initial carrier state to off. Before the device is opened, the carrier state should be off. It will not race with the link interrupt if we set it before calling register_netdev(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c5d0b72e |
|
13-Feb-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix 5762 NVRAM sizing Don't set the default size to 128K if it is 5762. Instead, rely on the size we obtain from NVRAM location 0xf0. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d240d210 |
|
14-Feb-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Expand EEE support for all 5717 B0 This chip supports Energy Efficient Ethernet. The existing code only supports a smaller set of devices with 5718 PCI ID. Expand support for all devices with the same 5717 B0 chip ID. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3f677af |
|
14-Feb-2013 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add 57766 device support. The patch also adds a couple of fixes - For the 57766 and non Ax versions of 57765, bootcode needs to setup the PCIE Fast Training Sequence (FTS) value to prevent transmit hangs. Unfortunately, it does not have enough room in the selfboot case (i.e. devices with no NVRAM). The driver needs to implement this. - For performance reasons, the 2k DMA engine mode on the 57766 should be enabled and dma size limited to 2k for standard sized packets. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7e6c63f0 |
|
06-Feb-2013 |
Hauke Mehrtens <hauke@hauke-m.de> |
tg3: add support for Ethernet core in bcm4785 The BCM4785 or sometimes named BMC4705 is a Broadcom SoC which a Gigabit 5750 Ethernet core. The core is connected via PCI with the rest of the SoC, but it uses some extension. This core does not use a firmware or an eeprom. Some devices only have a switch which supports 100MBit/s, this currently does not work with this driver. This patch was original written by Michael Buesch <m@bues.ch> and is in OpenWrt for some years now. This was tested on a Linksys WRT610N V1 and older versions of this patch were tested by other people on different devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5c358045 |
|
06-Feb-2013 |
Hauke Mehrtens <hauke@hauke-m.de> |
tg3: make it possible to provide phy_id in ioctl In OpenWrt we currently use a switch driver which uses the ioctls to configure the switch in the phy. We have to provide the phy_id to do so, but without this patch this is not possible. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b2adaca9 |
|
03-Feb-2013 |
Joe Perches <joe@perches.com> |
ethernet: Remove unnecessary alloc/OOM messages, alloc cleanups alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
daf3ec68 |
|
14-Jan-2013 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Fix crc errors on jumbo frame receive TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9c13cb8b |
|
14-Jan-2013 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f9a8f83b |
|
13-Jan-2013 |
Florian Fainelli <florian@openwrt.org> |
net: phy: remove flags argument from phy_{attach, connect, connect_direct} The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
17e1a42f |
|
10-Jan-2013 |
Dan Carpenter <dan.carpenter@oracle.com> |
tg3: missing break statement in tg3_get_5720_nvram_info() There is a missing break statement so FLASH_5762_EEPROM_HD gets treated like FLASH_5762_EEPROM_LD. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aaeb6cdf |
|
07-Jan-2013 |
Jiri Pirko <jiri@resnulli.us> |
remove init of dev->perm_addr in drivers perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b681b65d |
|
05-Jan-2013 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Remove IS_ENABLED(CONFIG_HWMON) check Commit de0a41484c47d783dd4d442914815076aa2caac2 added Kconfig logic to select HWMON and removed all the IS_ENABLED(CONFIG_HWMON) checks in the tg3.c file. It missed this one check in the header. Update version to 3.129 and update copyright year. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
857001f0 |
|
05-Jan-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Improve PCI function number detection. Simplify the code to detect PCI function number on 5717, 5719, and 5720. If shared memory does not have proper signature, read the function number from register directly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c86a8560 |
|
05-Jan-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Add NVRAM support for 5762 Detect NVRAM types for 5762 and read OTP firmware version. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c65a17f4 |
|
05-Jan-2013 |
Michael Chan <mchan@broadcom.com> |
tg3: Add support for new 5762 ASIC Add basic support for 5762 which is a 57765_PLUS class device. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
1dd06ae8 |
|
06-Dec-2012 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
drivers/net: fix up function prototypes after __dev* removals The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fb4ce8ad |
|
03-Dec-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: PTP - Enable the timestamping feature in hardware and fill skb tx/rx timestamps This patch implements the hardware timestamping as described in Documentation/networking/timestamping.txt Update version to 3.128. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0a633ac2 |
|
03-Dec-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: PTP - Add the hardware timestamp ioctl This patch implements the SIOCSHWTSTAMP ioctl as described in Documentation/networking/timestamping.txt [Removed HWTSTAMP_FILTER_ALL handling by returning -ERANGE based on input from Richard Cochran.] Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7d41e49a |
|
03-Dec-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: PTP - Implement the ptp api and ethtool functions This patch adds the ptp_caps structure, ptp api implementation, reference clock read and register/unregister functions. All the basic clock operations as described in Documentation/ptp/ptp.txt are supported. Frequency adjustment is performed using hardware with a 24 bit accumulator and a programmable correction value. On each clk, the correction value gets added to the accumulator and when it overflows, the time counter is incremented/decremented and the accumulator reset. So conversion from ppb to correction value is ppb * (1 << 24) / 1000000000 [Re-organized to put the ptp_clock_info struct declaration in one patch, added ptp_clock_info.name, and added locking to tg3_ptp_adjtime() based on input from Richard Cochran.] Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
be947307 |
|
03-Dec-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: PTP - Add header definitions, initialization and hw access functions. This patch adds code to write the reference clock. If a chip reset is performed, the hwclock is reinitialized with the adjusted kernel time Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
35763066 |
|
03-Dec-2012 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Fix inconsistent locking for tg3_netif_start(). Every caller holds tp->lock when calling tg3_netif_start() except tg3_io_resume(). Fix it so that it is all consistent. The subsequent PTP patches add tg3_ptp_resume() to tg3_netif_start() and the tp->lock is required. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
229b1ad1 |
|
03-Dec-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
tg3: remove __dev* attributes CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
0b3ba055 |
|
14-Nov-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Use tp->rxq_cnt when checking RSS tables. irq_cnt is no longer reliable since rxq_cnt can be independently configured. Update version to 3.127. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93df8b8f |
|
14-Nov-2012 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Cleanup hardcoded ethtool test array indexes Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f4a46d1f |
|
14-Nov-2012 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Prevent spurious tx timeout by setting carrier off before tx disable. The watchdog will not trigger when the carrier is off when reconfiguring the device. Because carrier state is now off during reset, we need to introduce a link_up flag to keep track of link state during PHY setup. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3d567e0e |
|
14-Nov-2012 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Set 10_100_ONLY flag for additional 10/100 Mbps devices - Also refactor the conditional to use the existing tg3_pci_tbl array. - Set flags in the driver_data field of the pci_device_id structure to identify these devices. - Add PCI_DEVICE_SUB() to pci.h to declare PCI 4-part IDs to match these devices. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bd473da3 |
|
05-Nov-2012 |
Nithin Nayak Sujir <nsujir@broadcom.com> |
tg3: Call tg3_netif_stop() from tg3_stop() instead of making separate tg3_napi_disable() and netif_tx_disable() calls. Update version to 3.126. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
79d49695 |
|
05-Nov-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Support 5717 C0 Add support for 5717C0 which is a 5720A0 with special bonds-out option. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
86449944 |
|
02-Oct-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix sparse warnings. drivers/net/ethernet/broadcom/tg3.c:8121:8: warning: symbol 'i' shadows an earlier one drivers/net/ethernet/broadcom/tg3.c:8003:6: originally declared here drivers/net/ethernet/broadcom/tg3.c:785:5: warning: symbol 'tg3_ape_scratchpad_read' was not declared. Should it be static? drivers/net/ethernet/broadcom/tg3.c:7781:19: warning: Using plain integer as NULL pointer drivers/net/ethernet/broadcom/tg3.c:10231:31: error: bad constant expression Reported-by: Fengguang Wu <fenguang.wu@intel.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
de0a4148 |
|
01-Oct-2012 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
tg3: unconditionally select HWMON support when tg3 is enabled. There is the seldom used corner case where HWMON=m at the same time as TIGON3=y (typically randconfigs) which will cause a link fail like: drivers/built-in.o: In function `tg3_close': tg3.c:(.text+0x16bd86): undefined reference to `hwmon_device_unregister' drivers/built-in.o: In function `tg3_hwmon_open': tg3.c:(.text+0x16fc4b): undefined reference to `hwmon_device_register' make[1]: *** [vmlinux] Error 1 Fix it as suggested by DaveM[1] by having the Kconfig logic simply select HWMON when TIGON3 is selected. This gets rid of all the extra IS_ENABLED ifdeffery in tg3.c as a side benefit. [1] http://marc.info/?l=linux-netdev&m=134250573718151&w=2 Cc: Michael Chan <mchan@broadcom.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Anisse Astier <anisse@astier.eu> Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cf6d6ea6 |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Disable multiple TX rings by default due to hardware flaw Simple round-robin hardware TX scheduling can cause starvation of TX rings with small packets when other TX rings have large TSO or jumbo packets. In the simplest case, consider 2 TCP streams running in opposite directions. The TSO TX traffic will hash to one ring and the ACKs for the incoming data on a different TCP connection will hash to a different TX ring. The hardware fetches one complete TSO packet (up to 64K data) before servicing the other TX ring. When it gets to the other TX ring, it will only fetch one packet (64-byte ACK packet in this case). After that, it will switch back to the 1st ring filled with more TSO packets. Because only one ACK can go out roughly every 500 usec in this case, the incoming data rate becomes very low. Update version to 3.125. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0968169c |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Add support for ethtool -L|-l to get/set the number of rings. Default remains the same. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
65138594 |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Refactor tg3_close() by introducing tg3_stop() that does the opposite of tg3_start(). This function will be useful when adding the support for changing the numbe of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d8f4cd38 |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Refactor tg3_open() by introducing tg3_start() that handles all initialization steps from IRQ allocation. This function will be needed when adding support for changing the number of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a489b6d9 |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Separate coalescing setup for rx and tx since the number of rings can be different. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9102426a |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Allow number of rx and tx rings to be set independently. irq_cnt is no longer necessarily equal to the number rx or tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
49a359e3 |
|
28-Sep-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Introduce separate functions to allocate/free RX/TX rings. This is preparation work to allow the number of RX and TX rings to be configured separately. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3646f0e5 |
|
07-Sep-2012 |
Stephen Hemminger <shemminger@vyatta.com> |
netdev: make pci_error_handlers const Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
0f49bfbd |
|
20-Aug-2012 |
Jiang Liu <jiang.liu@huawei.com> |
tg3: Use PCI Express Capability accessors Use PCI Express Capability access functions to simplify tg3 driver. [bhelgaas: split bnx2x and tg3 into separate patches] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
cac83e53 |
|
29-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Update version to 3.124 Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0f566b20 |
|
29-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix race condition in tg3_get_stats64() Spinlock should be taken before checking for tp->hw_stats. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
091f0ea3 |
|
29-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Add New 5719 Read DMA workaround After Power-on-reset, the 5719's TX DMA length registers may contain uninitialized values and cause TX DMA to stall. Check for invalid values and set a register bit to flush the TX channels. The bit needs to be turned off after the DMA channels have been flushed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
10ce95d6 |
|
29-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix Read DMA workaround for 5719 A0. The workaround was mis-applied to all 5719 and 5720 chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8151ad57 |
|
29-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Request APE_LOCK_PHY before PHY access to prevent PHY access conflict with APE firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
aed93e0b |
|
16-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Add hwmon support for temperature Some tg3 devices have management firmware that can export sensor data. Export temperature sensor reading via hwmon sysfs. [hwmon interface suggested by Ben Hutchings <bhutchings@solarflare.com>] Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cf8d55ae |
|
16-Jul-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add APE scratchpad read function for retreiving temperature sensor data. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b65a372b |
|
16-Jul-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add common function tg3_ape_event_lock() by refactoring code in tg3_ape_send_event(). The common function will be used in subsequent patches. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
165f4d1c |
|
16-Jul-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix the setting of the APE_HAS_NCSI flag The driver currently skips setting this flag if the VPD contains the firmware version string. We fix this by separating the probing of NCSI from the reading of the NCSI version string. The APE_HAS_NCSI flag is needed to properly read sensor data. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
02eca3f5 |
|
12-Jul-2012 |
Greg KH <gregkh@linuxfoundation.org> |
tg3: add device id of Apple Thunderbolt Ethernet device The Apple Thunderbolt ethernet device is already listed in the driver, but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and allows it to work properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
11800878 |
|
30-Jun-2012 |
Yuval Mintz <yuvalmin@broadcom.com> |
tg3: set maximal number of default RSS queues Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b918c62e |
|
17-May-2012 |
Yinghai Lu <yinghai@kernel.org> |
PCI: replace struct pci_bus secondary/subordinate with busn_res Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
b7abee6e |
|
06-Jun-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Apply short DMA frag workaround to 5906 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a1e8b307 |
|
18-May-2012 |
Eric Dumazet <edumazet@google.com> |
tg3: use netdev_alloc_frag() API Update our reference driver to use netdev_alloc_frag() API instead of the temporary custom allocator I introduced in commit 8d4057a938 (tg3: provide frags as skb head) This removes the memory leak we had, since we could leak one page at device dismantle. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8d4057a9 |
|
26-Apr-2012 |
Eric Dumazet <edumazet@google.com> |
tg3: provide frags as skb head This patch converts tg3 driver, one of our reference drivers, to use new build_skb() api in frag mode. Instead of using kmalloc() to allocate the memory block that will be used by build_skb() as skb->head, we use a page fragment. This is a followup of patch "net: allow skb->head to be a page fragment" This allows GRO, TCP coalescing, and splice() to be more efficient. Incidentally, this also removes SLUB slow path contention in kfree() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d3836f21 |
|
26-Apr-2012 |
Eric Dumazet <edumazet@google.com> |
net: allow skb->head to be a page fragment skb->head is currently allocated from kmalloc(). This is convenient but has the drawback the data cannot be converted to a page fragment if needed. We have three spots were it hurts : 1) GRO aggregation When a linear skb must be appended to another skb, GRO uses the frag_list fallback, very inefficient since we keep all struct sk_buff around. So drivers enabling GRO but delivering linear skbs to network stack aren't enabling full GRO power. 2) splice(socket -> pipe). We must copy the linear part to a page fragment. This kind of defeats splice() purpose (zero copy claim) 3) TCP coalescing. Recently introduced, this permits to group several contiguous segments into a single skb. This shortens queue lengths and save kernel memory, and greatly reduce probabilities of TCP collapses. This coalescing doesnt work on linear skbs (or we would need to copy data, this would be too slow) Given all these issues, the following patch introduces the possibility of having skb->head be a fragment in itself. We use a new skb flag, skb->head_frag to carry this information. build_skb() is changed to accept a frag_size argument. Drivers willing to provide a page fragment instead of kmalloc() data will set a non zero value, set to the fragment size. Then, on situations we need to convert the skb head to a frag in itself, we can check if skb->head_frag is set and avoid the copies or various fallbacks we have. This means drivers currently using frags could be updated to avoid the current skb->head allocation and reduce their memory footprint (aka skb truesize). (thats 512 or 1024 bytes saved per skb). This also makes bpf/netfilter faster since the 'first frag' will be part of skb linear part, no need to copy data. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e3c5530b |
|
09-Apr-2012 |
Jesper Juhl <jj@chaosbits.net> |
tg3: remove redundant NULL test before release_firmware() call There is no need to test for a NULL pointer before calling release_firmware - the function does that on its own. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
#
f891ea16 |
|
24-Apr-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Avoid panic from reserved statblk field access When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3f847490 |
|
03-Apr-2012 |
Richard Cochran <richardcochran@gmail.com> |
tg3: Support the get_ts_info ethtool method. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
085f1afc |
|
02-Apr-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix 5717 serdes powerdown problem If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9ffc93f2 |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Remove all #inclusions of asm/system.h Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
|
#
7ae52890 |
|
21-Mar-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix RSS ring refill race condition The RSS feature in tg3 hardware has only one rx producer ring for all RSS rings. NAPI vector 1 is special and handles the refilling of the rx producer ring on behalf of all RSS rings. There is a race condition between these RSS NAPIs and the NAPI[1]. If NAPI[1] finishes checking for refill and then another RSS ring empties the rx producer ring before NAPI[1] exits NAPI, the chip will be completely out of SKBs in the rx producer ring. We fix this by adding a flag tp->rx_refill and rely on napi_schedule()/ napi_complete() to help synchronize it to close the race condition. Update driver version to 3.123. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5cb917bc |
|
05-Mar-2012 |
Tom Herbert <therbert@google.com> |
tg3: Fix to use multi queue BQL interfaces Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert <therbert@google.com> Reported-by: Christoph Lameter <cl@gentwo.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0b471506 |
|
27-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Recode PCI MRRS adjustment as a PCI quirk This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2fae5e36 |
|
04-Mar-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix poor tx performance on 57766 after MTU change GRC reset causes the read DMA engine to go into a mode that breaks up requests into 256 bytes. A PHY reset is required to bring it back to the normal mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6541b806 |
|
04-Mar-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Add memory barriers to sync BD data for weak memory model architectures to ensure that the chip will DMA valid BD data. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c441b456 |
|
04-Mar-2012 |
Michael Chan <mchan@broadcom.com> |
tg3: Fix jumbo loopback test on 5719 Loopback on 9K packet fails because the chip has a DMA limit of 4K. The loopback test logic uses a single BD for simplicity. Fix it by reducing the jumbo packet size to the DMA limit. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
65ec698d |
|
28-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix tg3_get_stats64 for 5700 / 5701 devs tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700 and bcm5701 devices. However, functions that call tg3_halt() have already acquired tp->lock. When tg3_get_stats64() is called in tg3_halt(), deadlock will occur. This patch fixes the problem by separating the stat gathering code into a new tg3_get_nstats() function. tg3_get_stats64() is recoded to call this function and take tp->lock. The code that takes tp->lock in tg3_calc_crc_errors() has been removed. Function signatures have been cleaned up too. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
504f9b5a |
|
20-Feb-2012 |
Danny Kukawka <danny.kukawka@bisect.de> |
ethernet: unify return value of .ndo_set_mac_address if address is invalid Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
21f7638e |
|
21-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Create timer helper functions This patch seeks to clean up the timer related code. It begins by moving one-time timer setup code from tg3_open() to tg3_init_one(). It then creates a function that encapsulates the code needed to start the timer. A tg3_timer_stop() function was added for parity. Finally, this patch moves all the timer functions to a more suitable location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c7101359 |
|
21-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Clear RECOVERY_PENDING with reset_task_cancel If an error happens in the tx completion thread, tg3_reset_task will be scheduled and TX_RECOVERY_PENDING will be set. The TX_RECOVERY_PENDING flag causes tg3_poll[_msix] to return early before doing much of its work. Tg3_reset_task() gets canceled when the configuration of the device is changing, which always results in a chip reset. When this happens, the TX_RECOVERY_PENDING flag may be left set, which would unnecessarily hinder tg3_poll from doing work. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
d13ba512 |
|
21-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove SPEED_UNKNOWN checks tg3_phy_copper_begin() has code that configures the link advertisements through the use of the link_config.speed and link_config.duplex members. The driver does not internally use these members in this way, nor is it (currently) permitted via the ethtool interface. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
34655ad6 |
|
21-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix link check in tg3_adjust_link The tg3 driver tried to detect link changes by comparing the tg3 local active_speed member with SPEED_UNKNOWN (or formerly SPEED_INVALID). This check is not correct, since phylib will never set its speed member to either of these two values. The code only appeared to work because tg3 initializes active_speed to SPEED_INVALID during tg3_init_one. This patch introduces a new "old_link" tg3 member and then compares the phy_device's link member against it to detect link state changes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f274fd9a |
|
21-Feb-2012 |
Davidlohr Bueso <dave@gnu.org> |
tg3: remove IRQF_SAMPLE_RANDOM flag This driver is the last user of the IRQF_SAMPLE_RANDOM flag for net drivers, and since add_*_randomness interfaces have now deprecated the flag as a source of external noise, we can remove it. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e056c03 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Update copyright This patch updates the copyright dates in the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e740522e |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Use *_UNKNOWN ethtool definitions This patch replaces tg3's private SPEED_INVALID and DUPLEX_INVALID definitions with SPEED_UNKNOWN and DUPLEX_UNKNOWN respectively. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c6700ce2 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove unneeded link_config.orig_... members This patch removes the unneeded link_config.orig_* members. When the phy is in a low power state, the TG3_PHYFLG_IS_LOW_POWER flag solely determines how the link is configured. When the phy is powered back up, it can resume using the original settings. For the phylib case, the link configuration still needs to be saved, but since the phylib maintains its own configuration, we can repurpose the (unused in this case) tg3 link configuration members. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2855b9fe |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove unused link config code When tg3 devices are shutdown, the driver uses the TG3_PHYFLG_IS_LOW_POWER flag to enable a static phy configuration. Any attempt to use the link configuration variables is dead code. This patch removes such code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
42b123b1 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Consolidate ASIC rev detection code Detecting the ASIC revision of a device is getting to be an increasingly complex process. This patch consolidates all the ASIC rev detection code to a single routine for better maintainability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b28f389d |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Reduce UMP event collision window The tg3 driver needs to submit a few phy register values to the UMP firmware each time the link state changes. Up until now, the driver would wait for the previous event to complete, then proceed to gather data through a series of phy accesses. Since phy accesses are relatively slow, it is possible for another thread to attempt to submit its own event while the UMP code is still construction its message. This patch seeks to minimize the collision window as much as possible by preloading the phy data. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
42278224 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix NVRAM page writes on newer devices On newer devices, the hardware expects the NVRAM address register to be written only once per NVRAM page. To do otherwise causes NVRAM corruption. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3198e07f |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix copper autoneg adv checks When checking the autoneg advertisements, the driver failed to include the master and master enable bits for the bcm5701. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b546e46f |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix stats while interface is down If the tg3 interface is down, the driver will return ethtool stats uninitialized. This patch zeroes out the destination stat buffer in such a case. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
39069691 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Disable new DMA engine for 57766 A bug was found in the new DMA engine for the 57766. This patch disables it, which causes the device to fallback to the old DMA engine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c5665a53 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Move transmit comment to a better location This patch moves a comment in the transmit path to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4b409522 |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Eliminate unneeded prototype This patch eliminates the unneeded tg3_halt_cpu() prototype and moves the tg3_setup_phy() prototype closer to where it is needed. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
16c7fa7d |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Relocate tg3_find_peer This patch relocates tg3_find_peer to eliminate a prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dbe9b92a |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Move tg3_nvram_write_block functions This patch moves the tg3_nvram_write_block functions higher in the file to eliminate a prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ccd5ba9d |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Move tg3_set_rx_mode This patch moves __tg3_set_rx_mode above its first use and moves tg3_set_rx_mode down closer to where the netdev_ops functions should be. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
faf1627a |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Move tg3_change_mtu to a better location This patch moves tg3_change_mtu to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9a21fb8f |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Relocate tg3_reset_task This patch moves tg3_reset_task further down in the file where it makes more sense to be. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ebf3312e |
|
13-Feb-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Move tg3_restart_hw to a better location This patch relocates tg3_restart_hw() to a better location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
41de8d4c |
|
29-Jan-2012 |
Joe Perches <joe@perches.com> |
drivers/net: Remove alloc_etherdev error messages alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a5a11955 |
|
22-Jan-2012 |
Eric Dumazet <eric.dumazet@gmail.com> |
tg3: fix ipv6 header length computation tg3_start_xmit() makes the wrong assumption for TSOV6 that skb->head doesnt include any payload data. if (skb_is_gso_v6(skb)) hdr_len = skb_headlen(skb) - ETH_HLEN; This is not true anymore after commit f07d960df3 (tcp: avoid frag allocation for small frames) We should instead use : skb_transport_offset(skb) + tcp_hdrlen(skb) Its also true for IPv4 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c3b5003b |
|
17-Jan-2012 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix single-vector MSI-X code Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel) enabled. However, kdump only enables one CPU in the new environment, thus causing tg3 to abort MSI-X setup. When the driver attempts to enable INTA or MSI interrupt modes on a kdump kernel, interrupt delivery fails. This patch attempts to workaround the problem by forcing the driver to enable a single MSI-X interrupt. In such a configuration, the device's multivector interrupt mode must be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3db1cd5c |
|
19-Dec-2011 |
Rusty Russell <rusty@rustcorp.com.au> |
net: fix assignment of 0/1 to bool variables. DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
90415477 |
|
16-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Make the RSS indir tbl admin configurable This patch adds the ethtool callbacks necessary to change the rss indirection table from userspace. Should the number of interrupts change (e.g. across a close / open call, or through a reset) and any one of the indirection table values fall out-of-range, the driver will reset the indirection table to a default layout. [Integrated many suggestions made by Ben Hutchings.] Changes since v3 * Removed TG3_FLAG_SUPPORT_MSIX checks at the start of tg3_get_rxfh_indir() and tg3_set_rxfh_indir(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
bcebcc46 |
|
14-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Break out RSS indir table init and assignment This patch creates a new device member to hold the RSS indirection table and separates out the code that initializes the table from the code that programs the table into device registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f88788f0 |
|
14-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Use mii_advertise_flowctrl This patch replaces tg3's internal tg3_advert_flowctrl_1000T function with mii_advertise_flowctrl provided by the kernel headers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
55086ad9 |
|
14-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add 57766 ASIC rev support This patch adds support for the 57766 ASIC revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
a4cb428d |
|
14-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Make the TX BD DMA limit configurable The 57766 ASIC rev will impose a new TX BD DMA limit on the driver. This patch prepares for 57766 support by making the tx BD DMA limit tunable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4f272096 |
|
14-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Enable EEE support for capable 10/100 devs There are some devices in the 57765 ASIC rev that are EEE capable. Unfortunately the EEE setup code only gets executed if the device is gigabit capable. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
efab79c5 |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Update version to 3.122 This patch updates the tg3 version to 3.122. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
4a2db503 |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Return flowctrl config through ethtool This patch changes the driver to return the flow control configuration rather than the flow control status through the ETHTOOL_GPAUSEPARAM ioctl. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
859edb26 |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Track LP advertising This patch adds code to track the autonegotiation advertisements of the link partner and report them through ethtool. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e2bf73e7 |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Integrate flowctrl check into AN adv check This patch integrates tg3_adv_1000T_flowctrl_ok() into tg3_copper_is_advertising_all() and renames the function tg3_phy_copper_an_config_ok(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
92feeabf |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Save stats across chip resets Tg3 has a place to store stats, but doesn't really use it. This patch modifies the driver so that stats are saved across chip resets and gets cleared across close / open calls. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
0e6c9da3 |
|
08-Dec-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove ethtool stats member from dev struct This patch removes the ethtool stats member from the tg3 device structure. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
298376d3 |
|
28-Nov-2011 |
Tom Herbert <therbert@google.com> |
tg3: Support for byte queue limits Changes to tg3 to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2c55a3d0 |
|
28-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Scale back code that modifies MRRS Tg3 normally gets a performance boost by increasing the PCI Maximum Read Request Size (MRRS) to 4k. Unfortunately, this is causing some problems on particular hardware platforms. This patch removes all code that modifies the MRRS except for one case. As part of a solution to fix an internal FIFO problem on the 5719, the driver artificially capped the MRRS to 2k for the entire 5719, and later 5720, ASIC revs. This was overly aggressive and only really needed to be done for the 5719 A0. In the spirit of the rest of this patch, the driver will only reprogram the MRRS for this device if the value exceeds the 2k cap. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
cf9ecf4b |
|
28-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix TSO CAP for 5704 devs w / ASF enabled On the earliest TSO capable devices, TSO was accomplished through firmware. The TSO cannot coexist with ASF management firmware though. The tg3 driver determines whether or not ASF is enabled by calling tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory. Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move TSO_CAPABLE assignment", accidentally moved the code that determines TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a consequence, the driver was attempting to determine TSO capabilities before it had all the data it needed to make the decision. This patch fixes the problem by revisiting and reevaluating the decision after tg3_get_eeprom_hw_cfg() is called. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
e348c5e7 |
|
21-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add MDI-X reporting This patch adds MDI-X state reporting. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fa6b2aae |
|
21-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Restrict large prod ring cap devices Future devices may or may not be capable of supporting larger rx producer rings. This patch changes the code so that this flag is set on an ASIC rev to ASIC rev basis. Also, this patch changes a place where the LRG_PROD_RING_CAP flag was not controlling how the rx standard producer ring size was set. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
513aa6ea |
|
21-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Adjust BD replenish thresholds The BD replenish thresholds for the 57765 and newer ASIC revs are a little strict. They were tuned for a mode that is currently unused. This patch relaxes the thresholds so that they are set to values more inline with the resources available. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
f3791cdf |
|
21-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Make 1000Base-X FC resolution look like 1000T This patch changes tg3's 1000Base-X flow control resolution to look like the 1000Base-T flow control resolution code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
202ff1c2 |
|
21-Nov-2011 |
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> |
tg3: Fix advertisement handling Commit 28011cf19b (net: Add ethtool to mii advertisment conversion helpers) added a helper function ethtool_adv_to_mii_100bt() and tg3_copper_is_advertising_all(), tg3_phy_autoneg_cfg() were modified to use this. Before that commit, ethtool to mii advertisement conversion was done wrt speed, but now pause operation is also taken account. So, in tg3_copper_is_advertising_all(), below condition becomes true and this makes link up fails. if ((adv_reg & ADVERTISE_ALL) != all_mask) return 0; To fix this add ADVERTISE_ALL bit and operation to cap speed, and change default advertisement not including ADVERTISED_Pause. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9205fd9c |
|
17-Nov-2011 |
Eric Dumazet <eric.dumazet@gmail.com> |
tg3: switch to build_skb() infrastructure This is very similar to bnx2x conversion, but simpler since no special alignement is required, so goal was not to reduce skb truesize. Using build_skb() reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are more likely recycled in SLUB caches while still hot. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
37f07023 |
|
17-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
net: Change mii to ethtool advertisement function names This patch implements advice by Ben Hutchings to change the mii side of the function names to look more like the register whose values they convert. New LPA translation functions have been added as well. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
28011cf1 |
|
16-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
net: Add ethtool to mii advertisment conversion helpers Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
c8f44aff |
|
15-Nov-2011 |
Michał Mirosław <mirq-linux@rere.qmqm.pl> |
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
68aad78c |
|
07-Nov-2011 |
Rick Jones <rick.jones2@hp.com> |
sweep the floors and convert some .get_drvinfo routines to strlcpy Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5ae7fa06 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Update version to 3.121 This patch updates the tg3 version to 3.121. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b190624 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Eliminate timer race with reset_task During shutdown, it is impossible to reliably disable the timer and reset_task threads. Each thread can schedule the other, which leads to shutdown code that chases its tail. To fix the problem, this patch removes the ability of tg3_reset_task to schedule a new timer thread. To support this change, tg3_timer no longer terminates itself, but rather goes into a polling mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
db219973 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Schedule at most one tg3_reset_task run It is possible for multiple threads in the tg3 driver to each attempt to schedule a run of tg3_reset_task(). The multiple tg3_reset_task executions could all wind up on the same queue (and execute serially) or wind up on the queues of another processor (which could execute in parallel). Either scenario is not what was truly desired. This patch adds a new flag, TG3_FLAG_RESET_TASK_PENDING, and uses it to determine whether or not to schedule another run of tg3_reset_task(). With the new flag comes two new functions to facilitate scheduling and descheduling of tg3_reset_task(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9dc5e342 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Obtain PCI function number from device This patch adds code to attempt to obtain the PCI function number from the device rather than accept the number handed by the kernel. In pass-through scenarios, the function number handed by the kernel may not reflect the true function of the device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5bc09186 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix irq alloc error cleanup path This patch fixes a bug where the irq error cleanup path did not free all the resources it allocated. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Li <benli@broadcom.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
ba1142e4 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix 4k skb error recovery path On the error recovery resource unwind path, it is possible for the driver to attempt to unmap a fragment that hadn't been mapped. This patch fixes the problem by correcting the "last" parameter supplied. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b9e45482 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix 4k tx bd segmentation code The new 4k tx bd segmentation code had a bug in the error cleanup path. If the driver did not map all the physical fragments, the abort path would wind up advancing the producer index beyond the point where the setup code stopped. This would ultimately turn into a tx recovery error where the driver would expect the skb pointer to be set when it isn't. This patch fixes the problem, and then makes the code a little easier to understand. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
78f94dc7 |
|
04-Nov-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix APE mutex init and use APE mutex register blocks are shared by all ports of multiport devices. For some mutexing purposes, each function is assigned their own register. For other cases, each function is assigned its own request and grant bits of a single register. For the latter cases, the tg3 driver is incorrectly allowing each function to use the same set of grant / request bits. This patch fixes the code so that each function uses the appropriate bitset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
48855432 |
|
24-Oct-2011 |
Eric Dumazet <eric.dumazet@gmail.com> |
|PATCH net-next] tg3: add tx_dropped counter If a frame cant be transmitted, it is silently discarded. Add a counter to report these errors to user. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
9e903e08 |
|
18-Oct-2011 |
Eric Dumazet <eric.dumazet@gmail.com> |
net: add skb frag size accessors To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8b0c1167 |
|
07-Oct-2011 |
Rick Jones <rick.jones2@hp.com> |
net: Remove unnecessary driver assignments of ethtool_ringparam fields to zero Per comments from Ben Hutchings on a previous patch, sweep the floors a little removing unnecessary assignments of zero to fields of struct ethtool_ringparam in driver code supporting ethtool -g. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5d6bcdfe |
|
06-Oct-2011 |
Ian Campbell <ian.campbell@citrix.com> |
net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_map When I converted some drivers from pci_map_page to skb_frag_dma_map I neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and pci_dma_mapping_error into dma_mapping_error. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
93a700a9 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Code movement This patch just moves some code around for better organization. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
997b4f13 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Eliminate tg3_halt_cpu() prototype This patch moves the implementatino of tg3_halt_cpu() earlier in the file to eliminate its prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
fd6d3f0e |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Eliminate tg3_write_sig_post_reset() prototype This patch moves the implementation of tg3_write_sig_post_reset() earlier to eliminate its prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
8d5a89b3 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Eliminate tg3_stop_fw() prototype This patch moves tg3_stop_fw() earlier in the file to eliminate its prototype. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5b39de91 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add ability to turn off 1shot MSI In older devices, 1-shot MSI mode had to be enabled by the code. In newer devices however, 1-shot MSI mode is enabled by default; code would be needed to disable it. Disabling 1-shot MSI mode is useful when debugging. This patch changes the code so that the TG3_FLAG_1SHOT_MSI accurately reflects (and controls) the state of 1-shot MSI mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
81389f57 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove tp->rx_offset term when unneeded This patch removes the tp->rx_offset term if NET_IP_ALIGN is defined to zero. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
7f230735 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Fix missed MSI workaround This patch fixes a minor counter initialization bug and makes the MSI workaround slightly more efficient by attempting to service pending interrupts before applying the workaround. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b99d2a57 |
|
31-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Check all adv bits when checking config This patch makes sure the driver checks all advertisement bits when checking the current hw advertisements. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
dc234d0b |
|
24-Aug-2011 |
Ian Campbell <Ian.Campbell@citrix.com> |
tg3: convert to SKB paged frag API. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
eaa36660 |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Update version to 3.120 This patch updates the tg3 version to 3.120. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
941ec90f |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Add external loopback support to selftest This patch adds external loopback support to tg3's ethtool selftest. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
28a45957 |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Restructure tg3_test_loopback The tg3_test_loopback() function is starting to get more complicated as more loopback tests are added. This patch cleans up the code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5e5a7f37 |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Pull phy int lpbk setup into separate func This patch pulls out the internal phy loopback setup code into a separate function. This cleans up the loopback test code and makes it available for NETIF_F_LOOPBACK support later. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
6e01b20b |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Consilidate MAC loopback code The driver puts the device into MAC loopback in two places in the driver. This patch consolidates the code into a single routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
2215e24c |
|
19-Aug-2011 |
Matt Carlson <mcarlson@broadcom.com> |
tg3: Remove dead code Now that CPMU devices don't do MAC loopback, all the CPMU power saving mode adjustments are unneeded. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
afc4b13d |
|
16-Aug-2011 |
Jiri Pirko <jpirko@redhat.com> |
net: remove use of ndo_set_multicast_list in drivers replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
adfc5217 |
|
07-Apr-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
broadcom: Move the Broadcom drivers Moves the drivers for Broadcom devices into drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile changes. CC: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Gary Zambrano <zambrano@broadcom.com> CC: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|