dm: call the resume method on internal suspend

There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.

Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.

If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
<TASK>
? die+0x2d/0x80
? do_trap+0xeb/0xf0
? __list_del_entry_valid_or_report+0x77/0xc0
? do_error_trap+0x60/0x80
? __list_del_entry_valid_or_report+0x77/0xc0
? exc_invalid_op+0x49/0x60
? __list_del_entry_valid_or_report+0x77/0xc0
? asm_exc_invalid_op+0x16/0x20
? table_deps+0x1b0/0x1b0 [dm_mod]
? __list_del_entry_valid_or_report+0x77/0xc0
origin_postsuspend+0x1a/0x50 [dm_snapshot]
dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
dm_suspend+0xd8/0xf0 [dm_mod]
dev_suspend+0x1f2/0x2f0 [dm_mod]
? table_deps+0x1b0/0x1b0 [dm_mod]
ctl_ioctl+0x300/0x5f0 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
__x64_compat_sys_ioctl+0x104/0x170
do_syscall_64+0x184/0x1b0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---

Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: treat alloc_dax() -EOPNOTSUPP failure as non-fatal

In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of dm alloc_dev()
to treat alloc_dax() -EOPNOTSUPP failure as non-fatal.

Link: https://lkml.kernel.org/r/20240215144633.96437-5-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dm: update relevant MODULE_AUTHOR entries to latest dm-devel mailing list

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

md: port block device access to file

Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-4-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

block: pass a queue_limits argument to blk_alloc_disk

Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.

Also change blk_alloc_disk to return an ERR_PTR instead of just NULL
which can't distinguish errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bdev: rename freeze and thaw helpers

We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:

* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()

Also document the return code.

Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

dm: respect REQ_NOWAIT flag in normal bios issued to DM

Update DM core's normal IO submission to allocate required memory
using GFP_NOWAIT if REQ_NOWAIT is set.

Tested with simple test provided in commit a9ce385344f916 ("dm: don't
attempt to queue IO under RCU protection") that was enhanced to check
error codes. Also tested using fio's pvsync2 with nowait=1.

But testing with induced GFP_NOWAIT allocation failures wasn't
performed (yet).

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: enhance alloc_multiple_bios() to be more versatile

alloc_multiple_bios() has the useful ability to try allocating bios
with GFP_NOWAIT but will fallback to using GFP_NOIO. The callers
service both empty flush bios and abnormal bios (e.g. discard).

alloc_multiple_bios() enhancements offered in this commit:
- don't require table_devices_lock if num_bios = 1
- allow caller to pass GFP_NOWAIT to do usual GFP_NOWAIT with GFP_NOIO
fallback
- allow caller to pass GFP_NOIO to _only_ allocate using GFP_NOIO

Flush bios with data may be issued to DM with REQ_NOWAIT, as such it
makes sense to attempt servicing them with GFP_NOWAIT allocations.

But abnormal IO should never be issued using REQ_NOWAIT (if that
changes in the future that's fine, but no sense supporting it now).

While at it, rename __send_changing_extent_only() to
__send_abnormal_io().

[Thanks to both Ming and Mikulas for help with translating known
possible IO scenarios to requirements.]

Suggested-by: Ming Lei <ming.lei@redhat.com>
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: make __send_duplicate_bios return unsigned int

All the callers cast the value returned by __send_duplicate_bios to
unsigned int type, so we can return unsigned int as well.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: shortcut the calls to linear_map and stripe_map

Shortcut the calls to linear_map and stripe_map, so that they don't suffer
the overhead of retpolines used for indirect calls.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Convert to bdev_open_by_dev()

Convert device mapper to use bdev_open_by_dev() and pass the handle
around.

CC: Alasdair Kergon <agk@redhat.com>
CC: Mike Snitzer <snitzer@kernel.org>
CC: dm-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-10-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>

dm: don't attempt to queue IO under RCU protection

dm looks up the table for IO based on the request type, with an
assumption that if the request is marked REQ_NOWAIT, it's fine to
attempt to submit that IO while under RCU read lock protection. This
is not OK, as REQ_NOWAIT just means that we should not be sleeping
waiting on other IO, it does not mean that we can't potentially
schedule.

A simple test case demonstrates this quite nicely:

int main(int argc, char *argv[])
{
struct iovec iov;
int fd;

fd = open("/dev/dm-0", O_RDONLY | O_DIRECT);
posix_memalign(&iov.iov_base, 4096, 4096);
iov.iov_len = 4096;
preadv2(fd, &iov, 1, 0, RWF_NOWAIT);
return 0;
}

which will instantly spew:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x11d/0x1b0
__might_resched+0x3c3/0x5e0
? preempt_count_sub+0x150/0x150
mempool_alloc+0x1e2/0x390
? mempool_resize+0x7d0/0x7d0
? lock_sync+0x190/0x190
? lock_release+0x4b7/0x670
? internal_get_user_pages_fast+0x868/0x2d40
bio_alloc_bioset+0x417/0x8c0
? bvec_alloc+0x200/0x200
? internal_get_user_pages_fast+0xb8c/0x2d40
bio_alloc_clone+0x53/0x100
dm_submit_bio+0x27f/0x1a20
? lock_release+0x4b7/0x670
? blk_try_enter_queue+0x1a0/0x4d0
? dm_dax_direct_access+0x260/0x260
? rcu_is_watching+0x12/0xb0
? blk_try_enter_queue+0x1cc/0x4d0
__submit_bio+0x239/0x310
? __bio_queue_enter+0x700/0x700
? kvm_clock_get_cycles+0x40/0x60
? ktime_get+0x285/0x470
submit_bio_noacct_nocheck+0x4d9/0xb80
? should_fail_request+0x80/0x80
? preempt_count_sub+0x150/0x150
? lock_release+0x4b7/0x670
? __bio_add_page+0x143/0x2d0
? iov_iter_revert+0x27/0x360
submit_bio_noacct+0x53e/0x1b30
submit_bio_wait+0x10a/0x230
? submit_bio_wait_endio+0x40/0x40
__blkdev_direct_IO_simple+0x4f8/0x780
? blkdev_bio_end_io+0x4c0/0x4c0
? stack_trace_save+0x90/0xc0
? __bio_clone+0x3c0/0x3c0
? lock_release+0x4b7/0x670
? lock_sync+0x190/0x190
? atime_needs_update+0x3bf/0x7e0
? timestamp_truncate+0x21b/0x2d0
? inode_owner_or_capable+0x240/0x240
blkdev_direct_IO.part.0+0x84a/0x1810
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
? blkdev_read_iter+0x40d/0x530
? reacquire_held_locks+0x4e0/0x4e0
? __blkdev_direct_IO_simple+0x780/0x780
? rcu_is_watching+0x12/0xb0
? __mark_inode_dirty+0x297/0xd50
? preempt_count_add+0x72/0x140
blkdev_read_iter+0x2a4/0x530
do_iter_readv_writev+0x2f2/0x3c0
? generic_copy_file_range+0x1d0/0x1d0
? fsnotify_perm.part.0+0x25d/0x630
? security_file_permission+0xd8/0x100
do_iter_read+0x31b/0x880
? import_iovec+0x10b/0x140
vfs_readv+0x12d/0x1a0
? vfs_iter_read+0xb0/0xb0
? rcu_is_watching+0x12/0xb0
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
do_preadv+0x1b3/0x260
? do_readv+0x370/0x370
__x64_sys_preadv2+0xef/0x150
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5af41ad806
Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55
RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806
RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003
RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001
</TASK>

where in fact it is dm itself that attempts to allocate a bio clone with
GFP_NOIO under the rcu read lock, regardless of the request type.

Fix this by getting rid of the special casing for REQ_NOWAIT, and just
use the normal SRCU protected table lookup. Get rid of the bio based
table locking helpers at the same time, as they are now unused.

Cc: stable@vger.kernel.org
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: skip dm-stats work in alloc_io() unless needed

Don't dm_stats_record_start() if dm_stats_used() is false.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: avoid needless dm_io access if all IO accounting is disabled

Update dm_io_acct() to eliminate most dm_io struct accesses if both
block core's IO stats and dm-stats are disabled.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: support turning off block-core's io stats accounting

Commit bc58ba9468d9 ("block: add sysfs file for controlling io stats
accounting") allowed users to turn off disk stat accounting completely
by checking if queue flag QUEUE_FLAG_IO_STAT is set. In dm, this flag
is neither set nor checked: so block-core's io stats are continuously
counted and cannot be turned off.

Add support for turning off block-core's io stats accounting for dm.
Set QUEUE_FLAG_IO_STAT for dm's request_queue. If QUEUE_FLAG_IO_STAT
is set when an io starts, record the need for block core's io stats by
setting the DM_IO_BLK_STAT dm_io flag to avoid io stats being disabled
in the middle of the io.

DM statistics (dm-stats) is independent of block-core's io stats and
remains unchanged.

Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Add support for block PR read keys/reservation

This adds support in dm for the block PR read keys and read reservation
callouts.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-7-michael.christie@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

dm: use op specific max_sectors when splitting abnormal io

Split abnormal IO in terms of the corresponding operation specific
max_sectors (max_discard_sectors, max_secure_erase_sectors or
max_write_zeroes_sectors).

This fixes a significant dm-thinp discard performance regression that
was introduced with commit e2dd8aca2d76 ("dm bio prison v1: improve
concurrent IO performance"). Relative to discard: max_discard_sectors
is used instead of max_sectors; which fixes excessive discard splitting
(e.g. max_sectors=128K vs max_discard_sectors=64M).

Tested by discarding an 1 Petabyte dm-thin device:
lvcreate -V 1125899906842624B -T test/pool -n thin
time blkdiscard /dev/test/thin

Before this fix (splitting discards every 128K): ~116m
After this fix (splitting discards every 64M) : 0m33.460s

Reported-by: Zorro Lang <zlang@redhat.com>
Fixes: 06961c487a33 ("dm: split discards further if target sets max_discard_granularity")
Requires: 13f6facf3fae ("dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE")
Fixes: e2dd8aca2d76 ("dm bio prison v1: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: don't lock fs when the map is NULL during suspend or resume

As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().

This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().

Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: replace fmode_t with a block-specific type for block open flags

The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use the holder as indication for exclusive opens

The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.

For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the unused mode argument to ->release

The mode argument to the ->release block_device_operation is never used,
so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a gendisk to ->open

->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: introduce holder ops

Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues

BACKGROUND
==========

When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().

However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.

While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.

This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.

WHAT TO LOOK FOR
================

The conversions are from

alloc_workqueue(WQ_UNBOUND | flags, 1, args..)

to

alloc_ordered_workqueue(flags, args...)

which don't cause any functional changes. If you know that fully ordered
execution is not necessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.

If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.

As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@redhat.com
Cc: linux-kernel@vger.kernel.org

dm: unexport dm_get_queue_limits()

There are no dm_get_queue_limits() callers outside of DM core and
there shouldn't be.

Also, remove its BUG_ON(!atomic_read(&md->holders)) to micro-optimize
__process_abnormal_io().

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE

Introduce max_write_zeroes_granularity and
max_secure_erase_granularity flags in the dm_target struct.

If a target sets these then DM core will split IO of these operation
types accordingly (in terms of max_write_zeroes_sectors and
max_secure_erase_sectors respectively).

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: split discards further if target sets max_discard_granularity

The block core (bio_split_discard) will already split discards based
on the 'discard_granularity' and 'max_discard_sectors' queue_limits.
But the DM thin target also needs to ensure that it doesn't receive a
discard that spans a 'max_discard_sectors' boundary.

Introduce a dm_target 'max_discard_granularity' flag that if set will
cause DM core to split discard bios relative to 'max_discard_sectors'.
This treats 'discard_granularity' as a "min_discard_granularity" and
'max_discard_sectors' as a "max_discard_granularity".

Requested-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix __send_duplicate_bios() to always allow for splitting IO

Commit 7dd76d1feec70 ("dm: improve bio splitting and associated IO
accounting") only called setup_split_accounting() from
__send_duplicate_bios() if a single bio were being issued. But the case
where duplicate bios are issued must call it too.

Otherwise the bio won't be split and resubmitted (via recursion through
block core back to DM) to submit the later portions of a bio (which may
map to an entirely different target).

For example, when discarding an entire DM striped device with the
following DM table:
vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048

Before (broken, discards the first striped target's devices twice):
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
device-mapper: striped: target_stripe=0, bdev=7:0, start=2049 len=22528
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=22528

After (works as expected):
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
device-mapper: striped: target_stripe=0, bdev=7:2, start=2048 len=22528
device-mapper: striped: target_stripe=1, bdev=7:3, start=2048 len=22528

Fixes: 7dd76d1feec70 ("dm: improve bio splitting and associated IO accounting")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix improper splitting for abnormal bios

"Abnormal" bios include discards, write zeroes and secure erase. By no
longer passing the calculated 'len' pointer, commit 7dd06a2548b2 ("dm:
allow dm_accept_partial_bio() for dm_io without duplicate bios") took a
senseless approach to disallowing dm_accept_partial_bio() from working
for duplicate bios processed using __send_duplicate_bios().

It inadvertently and incorrectly stopped the use of 'len' when
initializing a target's io (in alloc_tio). As such the resulting tio
could address more area of a device than it should.

For example, when discarding an entire DM striped device with the
following DM table:
vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048

Before this fix:

device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=102400
blkdiscard: attempt to access beyond end of device
loop0: rw=2051, sector=2048, nr_sectors = 102400 limit=81920

device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=102400
blkdiscard: attempt to access beyond end of device
loop1: rw=2051, sector=2048, nr_sectors = 102400 limit=81920

After this fix;

device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872

Fixes: 7dd06a2548b2 ("dm: allow dm_accept_partial_bio() for dm_io without duplicate bios")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm stats: check for and propagate alloc_percpu failure

Check alloc_precpu()'s return value and return an error from
dm_stats_init() if it fails. Update alloc_dev() to fail if
dm_stats_init() does.

Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup()
even if dm-stats isn't being actively used.

Fixes: fd2ed4d25270 ("dm: add statistics support")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: count 'ios' and 'sectors' when io is done for bio-based device

While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.

Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.

Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove unnecessary (void*) conversion in event_callback()

Pointer variables of void * type do not require type cast.

Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add cond_resched() to dm_wq_requeue_work()

Otherwise the while() loop in dm_wq_requeue_work() can result in a
"dead loop" on systems that have preemption disabled. This is
particularly problematic on single cpu systems.

Fixes: 8b211aaccb915 ("dm: add two stage requeue mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add cond_resched() to dm_wq_work()

Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.

Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: remove flush_scheduled_work() during local_exit()

Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").

Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().

Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add missing blank line after declarations/fix those

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: avoid using symbolic permissions

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: correct block comments format.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: avoid initializing static variables

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: change "unsigned" to "unsigned int"

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: use fsleep() instead of msleep() for deterministic sleep duration

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add missing SPDX-License-Indentifiers

'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has
deprecated its use.

Suggested-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: send just one event on resize, not two

Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.

Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.

However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=2158628

This commit fixes this race.

We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: handle bio_split_to_limits() NULL return

This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: track per-add_disk holder relations in DM

dm is a bit special in that it opens the underlying devices. Commit
89f871af1b26 ("dm: delay registering the gendisk") tried to accommodate
that by allowing to add the holder to the list before add_gendisk and
then just add them to sysfs once add_disk is called. But that leads to
really odd lifetime problems and error handling problems as we can't
know the state of the kobjects and don't unwind properly. To fix this
switch to just registering all existing table_devices with the holder
code right after add_disk, and remove them before calling del_gendisk.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: make sure create and remove dm device won't race with open and close table

open_table_device() and close_table_device() is protected by
table_devices_lock, hence use it to protect add_disk() and
del_gendisk().

Prepare to track per-add_disk holder relations in dm.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup close_table_device

Take the list unlink and free into close_table_device so that no half
torn down table_devices exist. Also remove the check for a NULL bdev
as that can't happen - open_table_device never adds a table_device to
the list that does not have a valid block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup open_table_device

Move all the logic for allocation the table_device and linking it into
the list into the open_table_device. This keeps the code tidy and
ensures that the table_devices only exist in fully initialized state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove free_table_devices

free_table_devices just warns and frees all table_device structures when
the target removal did not remove them. This should never happen, but
if it did, just freeing the structure without deleting them from the
list or cleaning up the resources would not help at all. So just WARN on
a non-empty list instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove unnecessary assignment statement in alloc_dev()

Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: change from DMWARN to DMERR or DMCRIT for fatal errors

Change DMWARN to DMERR in cases when there is an unrecoverable error.
Change DMWARN to DMCRIT when handling of a case is unimplemented.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dax: introduce holder for dax_device

Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.

The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.

It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap. This
interface is called by memory_failure() in mm, and implemented by pmem
device.

Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.

Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.

The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure() => pmem_pgmap_memory_failure()
| dax_holder_notify_failure() =>
| dax_device->holder_ops->notify_failure() =>
| - xfs_dax_notify_failure()
| |* xfs_dax_notify_failure()
| |--------------------------
| | xfs_rmap_query_range()
| | xfs_dax_failure_fn()
| | * corrupted on metadata
| | try to recover data, call xfs_force_shutdown()
| | * corrupted on file data
| | try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()


The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.

One of the key mechanisms needed to be implemented in fsdax is CoW. Copy
the data from srcmap before we actually write data to the destination
iomap. And we just copy range in which data won't be changed.

Another mechanism is range comparison. In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data. In fsdax case, readpage() does not work. So, we need another
compare data with direct access support.

With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.


This patch (of 14):

To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation. This holder is used to
remember who is using this dax_device:

- When it is the backend of a filesystem, the holder will be the
instance of this filesystem.
- When this pmem device is one of the targets in a mapped device, the
holder will be this mapped device. In this case, the mapped device
has its own dax_device and it will follow the first rule. So that we
can finally track to the filesystem we needed.

The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.

Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

block: move ->bio_split to the gendisk

Only non-passthrough requests are split by the block layer and use the
->bio_split bio_set. Move it from the request_queue to the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: change the blk_queue_split calling convention

The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.

Also give it and the helpers used to implement it more descriptive names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix dm-raid crash if md_handle_request() splits bio

Commit ca522482e3eaf ("dm: pass NULL bdev to bio_alloc_clone")
introduced the optimization to _not_ perform bio_associate_blkg()'s
relatively costly work when DM core clones its bio. But in doing so it
exposed the possibility for DM's cloned bio to alter DM target
behavior (e.g. crash) if a target were to issue IO without first
calling bio_set_dev().

The DM raid target can trigger an MD crash due to its need to split
the DM bio that is passed to md_handle_request(). The split will
recurse to submit_bio_noacct() using a bio with an uninitialized
->bi_blkg. This NULL bio->bi_blkg causes blk_throtl_bio() to
dereference a NULL blkg_to_tg(bio->bi_blkg).

Fix this in DM core by adding a new 'needs_bio_set_dev' target flag that
will make alloc_tio() call bio_set_dev() on behalf of the target.
dm-raid is the only target that requires this flag. bio_set_dev()
initializes the DM cloned bio's ->bi_blkg, using bio_associate_blkg,
before passing the bio to md_handle_request().

Long-term fix would be to audit and refactor MD code to rely on DM to
split its bio, using dm_accept_partial_bio(), but there are MD raid
personalities (e.g. raid1 and raid10) whose implementation are tightly
coupled to handling the bio splitting inline.

Fixes: ca522482e3eaf ("dm: pass NULL bdev to bio_alloc_clone")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Start pr_preempt from the same starting path

pr_preempt has a similar issue as reserve where for all the
reservation types except the All Registrants ones the preempt can
create a reservation. And a follow up reservation or release needs to
go down the same path the preempt did. This has the pr_preempt work
like reserve and release where we always start from the first path in
the first group.

This commit has been tested with windows failover clustering's
validation test and libiscsi's PGR tests to check for regressions.
They both don't have tests to verify this case, so I tested it
manually.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Fix PR release handling for non All Registrants

This commit fixes a bug where we are leaving the reservation in place
even though pr_release has run and returned success.

If we have a Write Exclusive, Exclusive Access, or Write/Exclusive
Registrants only reservation, the release must be sent down the path
that is the reservation holder. The problem is multipath_prepare_ioctl
most likely selected path N for the reservation, then later when we do
the release multipath_prepare_ioctl will select a completely different
path. The device will then return success becuase the nvme and scsi
specs say to return success if there is no reservation or if the
release is sent down from a path that is not the holder. We then think
we have released the reservation.

This commit has us loop over each path and send a release so we can
make sure the release is executed on the correct path. It has been
tested with windows failover clustering's validation test which checks
this case, and it has been tested manually (the libiscsi PGR tests
don't have a test case for this yet, but I will be adding one).

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Start pr_reserve from the same starting path

When an app does a pr_reserve it will go to whatever path we happen to
be using at the time. This can result in errors when the app does a
second pr_reserve call and expects success but gets a failure because
the reserve is not done on the holder's path. This commit has us
always start trying to do reserves from the first path in the first
group.

Windows failover clustering will produce the type of pattern above.
With this commit, we will now pass its validation test for this case.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: Allow dm_call_pr to be used for path searches

The specs state that if you send a reserve down a path that is already
the holder success must be returned and if it goes down a path that
is not the holder reservation conflict must be returned. Windows
failover clustering will send a second reservation and expects that a
device returns success. The problem for multipathing is that for an
All Registrants reservation, we can send the reserve down any path but
for all other reservation types there is one path that is the holder.

To handle this we could add PR state to dm but that can get nasty.
Look at target_core_pr.c for an example of the type of things we'd
have to track. It will also get more complicated because other
initiators can change the state so we will have to add in async
event/sense handling.

This commit, and the 3 commits that follow, tries to keep dm simple
and keep just doing passthrough. This commit modifies dm_call_pr to be
able to find the first usable path that can execute our pr_op then
return. When dm_pr_reserve is converted to dm_call_pr in the next
commit for the normal case we will use the same path for every
reserve.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: return early from dm_pr_call() if DM device is suspended

Otherwise PR ops may be issued while the broader DM device is being
reconfigured, etc.

Fixes: 9c72bad1f31a ("dm: call PR reserve/unreserve on each underlying device")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm/core: Combine request operation type and flags

Improve kernel code uniformity by combining the request operation type and
flags into a single variable. Change 'int rw' into 'enum req_op op' because
the name 'op' is what is used in the block layer to hold a request type.
Use the blk_opf_t and enum req_op types where appropriate to improve static
type checking.

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-24-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Change the type of req_op() and bio_op() into enum req_op

Improve static type checking by changing the type of the value returned by
req_op() and bio_op() from unsigned int into enum req_op. Insert
'default: break;' in switch statements on the enum req_op type to prevent
that the compiler warns about these switch statements.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm table: audit all dm_table_get_target() callers

All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.

Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.

Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm table: remove dm_table_get_num_targets() wrapper

More efficient and readable to just access table->num_targets directly.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add two stage requeue mechanism

Commit 61b6e2e5321d ("dm: fix BLK_STS_DM_REQUEUE handling when dm_io
represents split bio") reverted DM core's bio splitting back to using
bio_split()+bio_chain() because it was found that otherwise DM's
BLK_STS_DM_REQUEUE would trigger a live-lock waiting for bio
completion that would never occur.

Restore using bio_trim()+bio_inc_remaining(), like was done in commit
7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting"), but this time with proper handling for the above
scenario that is covered in more detail in the commit header for
61b6e2e5321d.

Solve this issue by adding a two staged dm_io requeue mechanism that
uses the new dm_bio_rewind() via dm_io_rewind():

1) requeue the dm_io into the requeue_list added to struct
mapped_device, and schedule it via new added requeue work. This
workqueue just clones the dm_io->orig_bio (which DM saves and
ensures its end sector isn't modified). dm_io_rewind() uses the
sectors and sectors_offset members of the dm_io that are recorded
relative to the end of orig_bio: dm_bio_rewind()+bio_trim() are
then used to make that cloned bio reflect the subset of the
original bio that is represented by the dm_io that is being
requeued.

2) the 2nd stage requeue is same with original requeue, but
io->orig_bio points to new cloned bio (which matches the requeued
dm_io as described above).

This allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: use bdev_is_zoned instead of open coding it

Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: improve BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling

If either BLK_STS_DM_REQUEUE or BLK_STS_AGAIN is returned for POLLED
io, we requeue the original bio into deferred list and kick md->wq to
re-submit it to block layer.

Improve the handling in the following way:

1) Factor out dm_handle_requeue() for handling dm_io requeue.

2) Unify handling for BLK_STS_DM_REQUEUE and BLK_STS_AGAIN: clear
REQ_POLLED for BLK_STS_DM_REQUEUE too, for the sake of simplicity,
given BLK_STS_DM_REQUEUE is very unusual.

3) Queue md->wq explicitly in dm_handle_requeue(), so requeue handling
becomes more robust.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: refactor dm_md_mempool allocation

The current split between dm_table_alloc_md_mempools and
dm_alloc_md_mempools is rather arbitrary, so merge the two
into one easy to follow function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: remove blk_cleanup_disk

blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: open code blk_max_size_offset in max_io_len

max_io_len always passes an explicitly non-zero chunk_sectors into
blk_max_size_offset. That means much of blk_max_size_offset is not
needed and can be open coded to simplify the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220614090934.570632-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio

Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting") removed using cloned bio when dm io splitting is needed.
Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain()
causes multiple dm_io instances to share the same original bio, and it
works fine if IOs are completed successfully.

But a regression was caused for the case when BLK_STS_DM_REQUEUE is
returned from any one of DM's cloned bios (whose dm_io share the same
orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of
the original bio for the current exact dm_io needs to be re-submitted.
However, since the original bio is shared among all dm_io instances,
the ->orig_bio actually only represents the last dm_io instance, so
requeue can't work as expected. Also when more than one dm_io is
requeued, the same original bio is requeued from all dm_io's
completion handler, then race is caused.

Fix this issue by still allocating one clone bio for completing io
only, then io accounting can rely on ->orig_bio being unmodified. This
is needed because the dm_io's sector_offset and sectors members are
recorded relative to an unmodified ->orig_bio.

In the future, we can go back to using bio_trim()+bio_inc_remaining()
for dm's io splitting but then delay needing a bio clone only when
handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated
(so it needs a development cycle):
1) bio clone needs to be done in task context
2) a block interface for unwinding bio is required

Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: do not return early from dm_io_complete if BLK_STS_AGAIN without polling

Commit 5291984004edf ("dm: fix bio polling to handle possibile
BLK_STS_AGAIN") inadvertently introduced an early return from
dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN
occurs and bio-polling is _not_ being used.

Fix this by only returning early from dm_io_complete() if the bio has
first been properly queued to DM. Otherwise, the bio will never finish
via bio_endio.

Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix narrow race for REQ_NOWAIT bios being issued despite no support

Starting with the commit 63a225c9fd20, device mapper has an optimization
that it will take cheaper table lock (dm_get_live_table_fast instead of
dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT
must not block in the target request routine, if they did, we would be
blocking while holding rcu_read_lock, which is prohibited.

The targets that are suitable for REQ_NOWAIT optimization (and that don't
block in the map routine) have the flag DM_TARGET_NOWAIT set. Device
mapper will test if all the targets and all the devices in a table
support nowait (see the function dm_table_supports_nowait) and it will set
or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to
this check.

There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) &&
!blk_queue_nowait(q)) goto not_supported" - this will make sure that
REQ_NOWAIT bios can't enter a request queue that doesn't support them.

This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets
that don't support the REQ_NOWAIT flag (and that may block in the map
routine) - except that there is a small race condition:

submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without
holding any locks. Immediatelly after this check, the device mapper table
may be reloaded with a table that doesn't support REQ_NOWAIT (for example,
if we start moving the logical volume or if we activate a snapshot).
However the REQ_NOWAIT bio that already passed the check in
submit_bio_noacct would be sent to device mapper, where it could be
redirected to a dm target that doesn't support REQ_NOWAIT - the result is
sleeping while we hold rcu_read_lock.

In order to fix this race, we double-check if the target supports
REQ_NOWAIT while we hold the table lock (so that the table can't change
under us).

Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix use-after-free in dm_put_live_table_bio

dm_put_live_table_bio is called from the end of dm_submit_bio.
However, at this point, the bio may be already finished and the caller
may have freed the bio. Consequently, dm_put_live_table_bio accesses
the stale "bio" pointer.

Fix this bug by loading the bi_opf value and passing it to
dm_get_live_table_bio and dm_put_live_table_bio instead of the bio.

This bug was found by running the lvm2 testsuite with kasan.

Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix race in dm_start_io_acct

After commit 82f6cdcc3676c ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.

Fixes: 82f6cdcc3676c ("dm: switch dm_io booleans over to proper flags")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix zoned locking imbalance due to needless check in clone_endio

After the commit ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.

However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.

Fixes: ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix bio_set allocation

The use of bioset_init_from_src mean that the pre-allocated pools weren't
used for anything except parameter passing, and the integrity pool
creation got completely lost for the actual live mapped_device. Fix that
by assigning the actual preallocated dm_md_mempools to the mapped_device
and using that for I/O instead of creating new mempools.

Fixes: 2a2a4c510b76 ("dm: use bioset_init_from_src() to copy bio_set")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dax: add .recovery_write dax_operation

Introduce dax_recovery_write() operation. The function is used to
recover a dax range that contains poison. Typical use case is when
a user process receives a SIGBUS with si_code BUS_MCEERR_AR
indicating poison(s) in a dax range, in response, the user process
issues a pwrite() to the page-aligned dax range, thus clears the
poison and puts valid data in the range.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: introduce DAX_RECOVERY_WRITE dax access mode

Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: pass NULL bdev to bio_alloc_clone

Most DM targets will remap the clone bio passed to their ->map
function using bio_set_bdev(). So this change to pass NULL bdev to
bio_alloc_clone avoids clone-time work that sets up resources for a
bdev association that will not be used in practice (e.g. clone issued
to underlying device will not use DM device's blk-cgroups resources).

But clone->bi_bdev is still initialized following bio_alloc_clone to
preserve DM target expectations that clone->bi_bdev will be set.
Follow-up work is needed to audit DM targets to remove accesses to a
clone->bi_bdev that the target didn't initialize with bio_set_dev().

Depends-on: 7ecc56c62b27 ("block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: improve abnormal bio processing

Read/write/flush are the most common operations, optimize switch in
is_abnormal_io() for those cases. Follows same pattern established in
block perf-wip commit ("block: optimise blk_may_split for normal rw")

Also, push is_abnormal_io() check and blk_queue_split() down from
dm_submit_bio() to dm_split_and_process_bio() and set new
'is_abnormal_io' flag in clone_info. Optimize __split_and_process_bio
and __process_abnormal_io by leveraging ci.is_abnormal_io flag.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: simplify bio-based IO accounting further

Now that io splitting is recorded prior to, or during, ->map IO
accounting can happen immediately rather than defer until after
bio splitting in dm_split_and_process_bio().

Remove the DM_IO_START_ACCT flag and also remove dm_io's map_task
member because there is no longer any need to wait for splitting to
occur before accounting.

Also move dm_io struct's 'flags' member to consolidate struct holes.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: put all polled dm_io instances into a single list

Now that bio_split() isn't used by DM's bio splitting, it is a bit
overkill to link dm_io into an hlist given there is only single dm_io
in the list.

Convert to using a single list for holding all dm_io instances
associated with this bio.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: improve dm_io reference counting

Currently each dm_io's reference counter is grabbed before calling
__map_bio(), this way isn't efficient since we can move this grabbing
to initialization time inside alloc_io().

Meantime it becomes typical async io reference counter model: one is
for submission side, the other is for completion side, and the io won't
be completed until both sides are done.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: don't grab target io reference in dm_zone_map_bio

dm_zone_map_bio() is only called from __map_bio in which the io's
reference is grabbed already, and the reference won't be released
until the bio is submitted, so not necessary to do it dm_zone_map_bio
any more.

Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: improve bio splitting and associated IO accounting

The current DM code (ab)uses late assignment of dm_io->orig_bio (after
__map_bio() returns and any bio splitting is complete) to indicate the
FS bio has been processed and can be accounted. This results in
awkward waiting until ->orig_bio is set in dm_submit_bio_remap().

Also the bio splitting was implemented using bio_split()+bio_chain()
-- a well-worn pattern but it requires bio cloning purely for the
benefit of more natural IO accounting. The bio_split() result was
stored in ->orig_bio to represent the mapped part of the original FS
bio.

DM has switched to the bdev based IO accounting interface. DM's IO
accounting can be implemented in terms of the original FS bio (now
stored early in ->orig_bio) via access to its sectors/bio_op. And
if/when splitting is needed, set a new DM_IO_WAS_SPLIT flag and use
new dm_io fields of .sector_offset & .sectors to allow IO accounting
for split bios _without_ needing to clone a new bio to store in
->orig_bio.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: switch to bdev based IO accounting interfaces

DM splits flush with data into empty flush followed by bio with data
payload, switch dm_io_acct() to use bdev_{start,end}_io_acct() to do
this accoiunting more naturally (rather than temporarily changing the
bio's bi_size).

This will allow DM to more easily account bios that are split (in
following commit).

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: pass dm_io instance to dm_io_acct directly

All the other 4 parameters are retrieved from the 'dm_io' instance, so
it's not necessary to pass all four to dm_io_acct().

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct

dm->orig_bio is always passed to __dm_start_io_acct and dm_end_io_acct,
so it isn't necessary to take one bio parameter for the two helpers.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: use bio_sectors in dm_aceept_partial_bio

Rename 'bi_size' to 'bio_sectors' given bi_size is being stored in
sectors. Also, use bio_sectors() rather than open-coding it.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: conditionally enable branching for less used features

Use jump_labels to further reduce cost of unlikely branches for zoned
block devices, dm-stats and swap_bios throttling.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio

If a bio is marked REQ_NOWAIT optimize dm_submit_bio()'s dm_table RCU
usage to dm_{get,put}_live_table_fast.

DM core offers protection against blocking (via suspend) if REQ_NOWAIT.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: add local variables to clone_endio and __map_bio

Avoid redundant dereferences in both functions.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: mark various branches unlikely

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: simplify dm_start_io_acct

Pull common DM_IO_ACCOUNTED check out to beginning of dm_start_io_acct.
Also, use dm_tio_is_normal (and move it to dm-core.h).

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: simplify dm_io access in dm_split_and_process_bio

Use local variable instead of redudant access using ci.io

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: factor out dm_io_set_error and __dm_io_dec_pending

Also eliminate need to use errno_to_blk_status().

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset

A bioset's per-cpu alloc cache may have broader utility in the future
but for now constrain it to being tightly coupled to QUEUE_FLAG_POLL.

Also change dm_io_complete() to use bio_clear_polled() so that it
properly clears all associated bio state on requeue.

This commit improves DM's hipri bio polling (REQ_POLLED) perf by
7 - 20% depending on the system.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

block: remove QUEUE_FLAG_DISCARD

Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix bio length of empty flush

The commit 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.

However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.

To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().

Fixes: 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: allow dm_accept_partial_bio() for dm_io without duplicate bios

The intent behind commit e6fc9f62ce6e ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.

But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().

This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.

Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: fix bio polling to handle possibile BLK_STS_AGAIN

Expanded testing of DM's bio polling support (using more fio threads
to dm-linear ontop of null_blk) exposed the possibility for polled
bios to hang (repeatedly polling in io_uring) when null_blk responds
with BLK_STS_AGAIN (due to lack of resources):

1) io_complete_rw_iopoll() is called from blkdev_bio_end_io_async() to
notify kiocb is done, that is the completion interface between block
layer and io_uring

2) io_complete_rw_iopoll() is called from io_do_iopoll()

3) dm returns BLK_STS_AGAIN for one bio (on behalf of underlying
driver), then io_complete_rw_iopoll is called, but io_do_iopoll()
doesn't handle -EAGAIN at all (due to logic in io_rw_should_reissue)

4) reason for dm's BLK_STS_AGAIN is underlying null_blk driver ran out
of requests (easier to reproduce by setting low hw_queue_depth).

5) dm should handle BLK_STS_AGAIN for POLLED underlying IO, and may
retry in dm layer.

This fix adds REQ_POLLED specific BLK_STS_AGAIN handling to
dm_io_complete() that clears REQ_POLLED and requeues the bio to DM
using queue_io().

Fixes: b99fdcdc3636 ("dm: support bio polling")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: revised header, reused dm_io_complete's REQ_POLLED case]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: consolidate spinlocks in dm_io struct

No reason to have separate startio_lock and endio_lock given endio_lock
could be used during submission anyway.

This change leaves the dm_io struct weighing in at 256 bytes (down
from 272 bytes, so saves a cacheline).

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: switch dm_target_io booleans over to proper flags

Add flags to dm_target_io and manage them using the same pattern used
for bi_flags in struct bio.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: switch dm_io booleans over to proper flags

Add flags to dm_io and manage them using the same pattern used for
bi_flags in struct bio.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: return void from __send_empty_flush

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: factor out dm_io_complete

Optimizes dm_io_dec_pending() slightly by avoiding local variables.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: simplify dm_sumbit_bio_remap interface

Remove the from_wq argument from dm_sumbit_bio_remap(). Eliminates the
need for dm_sumbit_bio_remap() callers to know whether they are
calling for a workqueue or from the original dm_submit_bio().

Add map_task to dm_io struct, record the map_task in alloc_io and
clear it after all target ->map() calls have completed. Update
dm_sumbit_bio_remap to check if 'current' matches io->map_task rather
than rely on passed 'from_rq' argument.

This change really simplifies the chore of porting each DM target to
using dm_sumbit_bio_remap() because there is no longer the risk of
programming error by not completely knowing all the different contexts
a particular method that calls dm_sumbit_bio_remap() might be used in.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add WARN_ON_ONCE to dm_submit_bio_remap

If a target uses dm_submit_bio_remap() it should set
ti->accounts_remapped_io.

Also, switch dm_start_io_acct() WARN_ON to WARN_ON_ONCE.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: support bio polling

Support bio polling (REQ_POLLED) in the following approach:

1) only support io polling on normal READ/WRITE, and other abnormal IOs
still fallback to IRQ mode, so the target io (and DM's clone bio) is
exactly inside the dm io.

2) hold one refcnt on io->io_count after submitting this dm bio with
REQ_POLLED

3) support dm native bio splitting, any dm io instance associated with
current bio will be added into one list which head is bio->bi_private
which will be recovered before ending this bio

4) implement .poll_bio() callback, call bio_poll() on the single target
bio inside the dm io which is retrieved via bio->bi_bio_drv_data; call
dm_io_dec_pending() after the target io is done in .poll_bio()

5) enable QUEUE_FLAG_POLL if all underlying queues enable QUEUE_FLAG_POLL,
which is based on Jeffle's previous patch.

These changes are good for a 30-35% IOPS improvement for polled IO.

For detailed test results please see (Jens, thanks for testing!):
https://listman.redhat.com/archives/dm-devel/2022-March/049868.html
or https://marc.info/?l=linux-block&m=164684246214700&w=2

Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

scsi: dm: Remove WRITE_SAME support

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

dm: remove unnecessary local variables in __bind

Also remove empty newline before 'out:' label at end of __bind.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: requeue IO if mapping table not yet available

Update both bio-based and request-based DM to requeue IO if the
mapping table not available.

This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.

Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix use-after-free in dm_cleanup_zoned_dev()

dm_cleanup_zoned_dev() uses queue, so it must be called
before blk_cleanup_disk() starts its killing:

blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()->
->...RCU...->blk_free_queue_rcu()->kmem_cache_free()

Otherwise, RCU callback may be executed first and
dm_cleanup_zoned_dev() will touch free'd memory:

BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0
Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681

CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x150
? dm_cleanup_zoned_dev+0x33/0xd0
kasan_report.cold+0x7f/0x11b
? dm_cleanup_zoned_dev+0x33/0xd0
dm_cleanup_zoned_dev+0x33/0xd0
__dm_destroy+0x26a/0x400
? dm_blk_ioctl+0x230/0x230
? up_write+0xd8/0x270
dev_remove+0x156/0x1d0
ctl_ioctl+0x269/0x530
? table_clear+0x140/0x140
? lock_release+0xb2/0x750
? remove_all+0x40/0x40
? rcu_read_lock_sched_held+0x12/0x70
? lock_downgrade+0x3c0/0x3c0
? rcu_read_lock_sched_held+0x12/0x70
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fb6dfa95c27

Fixes: bb37d77239af ("dm: introduce zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add dm_submit_bio_remap interface

Where possible, switch from early bio-based IO accounting (at the time
DM clones each incoming bio) to late IO accounting just before each
remapped bio is issued to underlying device via submit_bio_noacct().

Allows more precise bio-based IO accounting for DM targets that use
their own workqueues to perform additional processing of each bio in
conjunction with their DM_MAPIO_SUBMITTED return from their map
function. When a target is updated to use dm_submit_bio_remap() they
must also set ti->accounts_remapped_io to true.

Use xchg() in start_io_acct(), as suggested by Mikulas, to ensure each
IO is only started once. The xchg race only happens if
__send_duplicate_bios() sends multiple bios -- that case is reflected
via tio->is_duplicate_bio. Given the niche nature of this race, it is
best to avoid any xchg performance penalty for normal IO.

For IO that was never submitted with dm_bio_submit_remap(), but the
target completes the clone with bio_endio, accounting is started then
ended and pending_io counter decremented.

Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: flag clones created by __send_duplicate_bios

Formally disallow dm_accept_partial_bio() on clones created by
__send_duplicate_bios() because their len_ptr points to a shared
unsigned int. __send_duplicate_bios() is only used for flush bios
and other "abnormal" bios (discards, writezeroes, etc). And
dm_accept_partial_bio() already didn't support flush bios.

Also refactor __send_changing_extent_only() to reflect it cannot fail.
As such __send_changing_extent_only() can update the clone_info before
__send_duplicate_bios() is called to fan-out __map_bio() calls.

Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: move duplicate code from callers of alloc_tio into alloc_tio

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: record old_sector in dm_target_io before calling map function

Prep for being able to defer trace_block_bio_remap() until when the
bio is remapped and submitted by the DM target.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove legacy code only needed before submit_bio recursion

Commit 8615cb65bd63 ("dm: remove useless loop in
__split_and_process_bio") showcased that we no longer loop.

Remove the bio_advance() in __split_and_process_bio() that was only
needed when looping was possible.

Similarly there is no need to advance the bio, using ci->sector
cursor, in __send_duplicate_bios().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove unused mapped_device argument from free_tio

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove impossible BUG_ON in __send_empty_flush

The flush_bio in question was just initialized to be empty, so there
is no way bio_has_data() will return true. So remove stale BUG_ON().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: reduce code duplication in __map_bio

Error path code (for handling DM_MAPIO_REQUEUE and DM_MAPIO_KILL) is
effectively identical.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: refactor dm_split_and_process_bio a bit

Remove needless branching and indentation. Leaves code to catch
malformed op_is_zone_mgmt bios (they shouldn't have a payload).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fold __clone_and_map_data_bio into __split_and_process_bio

Fold __clone_and_map_data_bio into its only caller.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: rename split functions

Rename __split_and_process_bio to dm_split_and_process_bio.
Rename __split_and_process_non_flush to __split_and_process_bio.

Also fix a stale comment and whitespace.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: eliminate copying of dm_io fields in dm_io_dec_pending

There is no need for dm_io_dec_pending() to copy dm_io fields
anymore now that DM provides its own pending_io counters again.

The race documented in commit d208b89401e0 ("dm: fix mempool NULL
pointer race when completing IO") no longer exists now that block
core's in_flight counters aren't used to signal all dm_io is
complete.

Also, rename {start,end}_io_acct to dm_{start,end}_io_acct.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm stats: fix too short end duration_ns when using precise_timestamps

dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit b879f915bc48 ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).

Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.

Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.

Fixes: b879f915bc48 ("dm: properly fix redundant bio-based IO accounting")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix double accounting of flush with data

DM handles a flush with data by first issuing an empty flush and then
once it completes the REQ_PREFLUSH flag is removed and the payload is
issued. The problem fixed by this commit is that both the empty flush
bio and the data payload will account the full extent of the data
payload.

Fix this by factoring out dm_io_acct() and having it wrap all IO
accounting to set the size of bio with REQ_PREFLUSH to 0, account the
IO, and then restore the original size.

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: interlock pending dm_io and dm_wait_for_bios_completion

Commit d208b89401e0 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.

When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.

Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.

Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: pass a block_device to bio_clone_fast

Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: use bio_clone_fast in alloc_io/alloc_tio

Replace open coded bio_clone_fast implementations with the actual helper.
Note that the bio allocated as part of the dm_io structure in alloc_io
will only actually be used later in alloc_tio, making this earlier
cloning of the information safe.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: clone crypto and integrity data in __bio_clone_fast

__bio_clone_fast should also clone integrity and crypto data, as a clone
without those is incomplete. Right now the only caller that can actually
support crypto and integrity data (dm) does it manually for the one
callchain that supports these, but we better do it properly in the core.

Note that all callers except for the above mentioned one also don't need
to handle failure at all, given that the integrity and crypto clones are
based on mempool allocations that won't fail for sleeping allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: simplify the single bio fast path in __send_duplicate_bios

Most targets just need a single flush bio. Open code that case in
__send_duplicate_bios without the need to add the bio to a list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: retun the clone bio from alloc_tio

Return the clone bio embedded into the tio as that is what the callers
actually want. Similar for the free side.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: pass the bio instead of tio to __map_bio

This simplifies the callers a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: move cloning the bio into alloc_tio

Move the call to __bio_clone_fast and the assignment of ->len_ptr from
the callers into alloc_tio to prepare for changes to the bio clone API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fold __send_duplicate_bios into __clone_and_map_simple_bio

Fold __send_duplicate_bios into its only caller to prepare for
refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fold clone_bio into __clone_and_map_data_bio

Fold clone_bio into its only caller to prepare for refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: add a clone_to_tio helper

Add a helper to stop open coding the container_of operations to get
from the clone bio to the tio structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a block_device and opf to bio_init

Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: pass a block_device and opf to bio_alloc_bioset

Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.

Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: bio_alloc can't fail if it is allowed to sleep

Remove handling of NULL returns from sleeping bio_alloc calls given that
those can't fail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix surprise removal for drivers calling blk_set_queue_dying

Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.

Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.

Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: properly fix redundant bio-based IO accounting

Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().

This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.

Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1f94e ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: revert partial fix for redundant bio-based IO accounting

Reverts a1e1cb72d9649 ("dm: fix redundant IO accounting for bios that
need splitting") because it was too narrow in scope (only addressed
redundant 'sectors[]' accounting and not ios, nsecs[], etc).

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-3-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dax: remove the copy_from_iter and copy_to_iter methods

These methods indirect the actual DAX read/write path. In the end pmem
uses magic flush and mc safe variants and fuse and dcssblk use plain ones
while device mapper picks redirects to the underlying device.

Add set_dax_nocache() and set_dax_nomc() APIs to control which copy
routines are used to remove indirect call from the read/write fast path
as well as a lot of boilerplate code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs]
Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: remove the DAXDEV_F_SYNC flag

Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and
just let the drivers call set_dax_synchronous directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: return the partition offset from fs_dax_get_by_bdev

Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: remove dax_capable

Just open code the block size and dax_dev == NULL checks in the callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dax: simplify the dax_device <-> gendisk association

Replace the dax_host_hash with an xarray indexed by the pointer value
of the gendisk, and require explicitly calls from the block drivers that
want to associate their gendisk with a dax_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: make the DAX support depend on CONFIG_FS_DAX

The device mapper DAX support is all hanging off a block device and thus
can't be used with device dax. Make it depend on CONFIG_FS_DAX instead
of CONFIG_DAX_DRIVER. This also means that bdev_dax_pgoff only needs to
be built under CONFIG_FS_DAX now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20211129102203.2243509-3-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: fix alloc_dax error handling in alloc_dev

Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.

Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211129102203.2243509-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

block: remove GENHD_FL_EXT_DEVT

All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.

So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: don't stop request queue after the dm device is suspended

For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two call to be balanced.

__bind() is only called from dm_swap_table() in which dm device has been
suspended already, so not necessary to stop queue again. With this way,
request queue quiesce and unquiesce can be balanced.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e68 ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20211021145918.2691762-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: make workqueue names device-specific

Add device number to kdmflush workqueue name to help debugging CPU usage.

Resulting `ps axfu` snippet:

root 3791 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kdmflush/253:7]
root 3792 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kcryptd_io/253:7]
root 3793 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kcryptd/253:7]
root 3794 0.0 0.0 0 0 ? S paź19 0:00 \_ [dmcrypt_write/253:7]
root 3814 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kdmflush/253:8]
root 3815 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kdmflush/253:9]
root 3816 0.0 0.0 0 0 ? I< paź19 0:00 \_ [kdmflush/253:10]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add add_disk() error handling

We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.

There are two calls to dm_setup_md_queue() which can fail then, one on
dm_early_create() and we can easily see that the error path there
calls dm_destroy in the error path. The other use case is on the ioctl
table_load case. If that fails userspace needs to call the
DM_DEV_REMOVE_CMD to cleanup the state - similar to any other
failure.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

blk-crypto: rename blk_keyslot_manager to blk_crypto_profile

blk_keyslot_manager is misnamed because it doesn't necessarily manage
keyslots. It actually does several different things:

- Contains the crypto capabilities of the device.

- Provides functions to control the inline encryption hardware.
Originally these were just for programming/evicting keyslots;
however, new functionality (hardware-wrapped keys) will require new
functions here which are unrelated to keyslots. Moreover,
device-mapper devices already (ab)use "keyslot_evict" to pass key
eviction requests to their underlying devices even though
device-mapper devices don't have any keyslots themselves (so it
really should be "evict_key", not "keyslot_evict").

- Sometimes (but not always!) it manages keyslots. Originally it
always did, but device-mapper devices don't have keyslots
themselves, so they use a "passthrough keyslot manager" which
doesn't actually manage keyslots. This hack works, but the
terminology is unnatural. Also, some hardware doesn't have keyslots
and thus also uses a "passthrough keyslot manager" (support for such
hardware is yet to be upstreamed, but it will happen eventually).

Let's stop having keyslot managers which don't actually manage keyslots.
Instead, rename blk_keyslot_manager to blk_crypto_profile.

This is a fairly big change, since for consistency it also has to update
keyslot manager-related function names, variable names, and comments --
not just the actual struct name. However it's still a fairly
straightforward change, as it doesn't change any actual functionality.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: rename keyslot-manager files to blk-crypto-profile

In preparation for renaming struct blk_keyslot_manager to struct
blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c
source files. Renaming these files separately before making a lot of
changes to their contents makes it easier for git to understand that
they were renamed.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: add add_disk() error handling

We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.

There are two calls to dm_setup_md_queue() which can fail then,
one on dm_early_create() and we can easily see that the error path
there calls dm_destroy in the error path. The other use case is on
the ioctl table_load case. If that fails userspace needs to call
the DM_DEV_REMOVE_CMD to cleanup the state - similar to any other
failure.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211015233028.2167651-4-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: switch polling to be bio based

Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.

Polling for the bio itself leads to a few advantages:

- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix mempool NULL pointer race when completing IO

dm_io_dec_pending() calls end_io_acct() first and will then dec md
in-flight pending count. But if a task is swapping DM table at same
time this can result in a crash due to mempool->elements being NULL:

task1 task2
do_resume
->do_suspend
->dm_wait_for_completion
bio_endio
->clone_endio
->dm_io_dec_pending
->end_io_acct
->wakeup task1
->dm_swap_table
->__bind
->__bind_mempools
->bioset_exit
->mempool_exit
->free_io

[ 67.330330] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
......
[ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 67.330510] pc : mempool_free+0x70/0xa0
[ 67.330515] lr : mempool_free+0x4c/0xa0
[ 67.330520] sp : ffffff8008013b20
[ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004
[ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8
[ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800
[ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800
[ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80
[ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c
[ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd
[ 67.330563] x15: 000000000093b41e x14: 0000000000000010
[ 67.330569] x13: 0000000000007f7a x12: 0000000034155555
[ 67.330574] x11: 0000000000000001 x10: 0000000000000001
[ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000
[ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a
[ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001
[ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8
[ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970
[ 67.330609] Call trace:
[ 67.330616] mempool_free+0x70/0xa0
[ 67.330627] bio_put+0xf8/0x110
[ 67.330638] dec_pending+0x13c/0x230
[ 67.330644] clone_endio+0x90/0x180
[ 67.330649] bio_endio+0x198/0x1b8
[ 67.330655] dec_pending+0x190/0x230
[ 67.330660] clone_endio+0x90/0x180
[ 67.330665] bio_endio+0x198/0x1b8
[ 67.330673] blk_update_request+0x214/0x428
[ 67.330683] scsi_end_request+0x2c/0x300
[ 67.330688] scsi_io_completion+0xa0/0x710
[ 67.330695] scsi_finish_command+0xd8/0x110
[ 67.330700] scsi_softirq_done+0x114/0x148
[ 67.330708] blk_done_softirq+0x74/0xd0
[ 67.330716] __do_softirq+0x18c/0x374
[ 67.330724] irq_exit+0xb4/0xb8
[ 67.330732] __handle_domain_irq+0x84/0xc0
[ 67.330737] gic_handle_irq+0x148/0x1b0
[ 67.330744] el1_irq+0xe8/0x190
[ 67.330753] lpm_cpuidle_enter+0x4f8/0x538
[ 67.330759] cpuidle_enter_state+0x1fc/0x398
[ 67.330764] cpuidle_enter+0x18/0x20
[ 67.330772] do_idle+0x1b4/0x290
[ 67.330778] cpu_startup_entry+0x20/0x28
[ 67.330786] secondary_start_kernel+0x160/0x170

Fix this by:
1) Establishing pointers to 'struct dm_io' members in
dm_io_dec_pending() so that they may be passed into end_io_acct()
_after_ free_io() is called.
2) Moving end_io_acct() after free_io().

Cc: stable@vger.kernel.org
Signed-off-by: Jiazi Li <lijiazi@xiaomi.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: use fs_dax_get_by_bdev instead of dax_get_by_host

There is no point in trying to finding the dax device if the DAX flag is
not set on the queue as none of the users of the device mapper exported
block devices could make use of the DAX capability.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210826135510.6293-4-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm ima: add a warning in dm_init if duplicate ima events are not measured

The end-users of DM devices/targets may remove and re-create the same
device multiple times. IMA does not measure such duplicate events if the
configuration CONFIG_IMA_DISABLE_HTABLE is set to 'n'.
To avoid confusion, the end-users need some indication on the client
if that configuration option is disabled.

Add a one-time warning during dm_init() if CONFIG_IMA_DISABLE_HTABLE
is set to 'n', to notify the end-users that duplicate events will not
be measured in the ima log. Also cleanup some whitespace in dm_init().

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm ima: measure data on table load

DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.

Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.

Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.

Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: delay registering the gendisk

device mapper is currently the only outlier that tries to call
register_disk after add_disk, leading to fairly inconsistent state
of these block layer data structures. Instead change device-mapper
to just register the gendisk later now that the holder mechanism
can cope with that.

Note that this introduces a user visible change: the dm kobject is
now only visible after the initial table has been loaded.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: move setting md->type into dm_setup_md_queue

Move setting md->type from both callers into dm_setup_md_queue.
This ensures that md->type is only set to a valid value after the queue
has been fully setup, something we'll rely on future changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup cleanup_mapped_device

md->queue is now always set when md->disk is set, so simplify the
conditionals a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20210804094147.459763-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: introduce zone append emulation

For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.

To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().

Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.

Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.

The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().

For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.

All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: rearrange core declarations for extended use from dm-zone.c

Move the definitions of struct dm_target_io, struct dm_io and the bits
of the flags field of struct mapped_device from dm.c to dm-core.h to
make them usable from dm-zone.c. For the same reason, declare
dec_pending() in dm-core.h after renaming it to dm_io_dec_pending().
And for symmetry of the function names, introduce the inline helper
dm_io_inc_pending() instead of directly using atomic_inc() calls.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: Forbid requeue of writes to zones

A target map method requesting the requeue of a bio with
DM_MAPIO_REQUEUE or completing it with DM_ENDIO_REQUEUE can cause
unaligned write errors if the bio is a write operation targeting a
sequential zone. If a zoned target request such a requeue, warn about
it and kill the IO.

The function dm_is_zone_write() is introduced to detect write operations
to zoned targets.

This change does not affect the target drivers supporting zoned devices
and exposing a zoned device, namely dm-crypt, dm-linear and dm-flakey as
none of these targets ever request a requeue.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: move zone related code to dm-zone.c

Move core and table code used for zoned targets and conditionally
defined with #ifdef CONFIG_BLK_DEV_ZONED to the new file dm-zone.c.
This file is conditionally compiled depending on CONFIG_BLK_DEV_ZONED.
The small helper dm_set_zones_restrictions() is introduced to
initialize a mapped device request queue zone attributes in
dm_table_set_restrictions().

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: Fix dm_accept_partial_bio() relative to zone management commands

Fix dm_accept_partial_bio() to actually check that zone management
commands are not passed as explained in the function documentation
comment. Also, since a zone append operation cannot be split, add
REQ_OP_ZONE_APPEND as a forbidden command.

White lines are added around the group of BUG_ON() calls to make the
code more legible.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: convert to blk_alloc_disk/blk_cleanup_disk

Convert the dm driver to use the blk_alloc_disk and blk_cleanup_disk
helpers to simplify gendisk and request_queue allocation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sched: Change task_struct::state

Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org

dm: unexport dm_{get,put}_table_device

These are only used by DM core, DM target modules should only use
dm_{get,put}_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove useless loop in __split_and_process_bio

Remove useless "while" loop. If the condition ci.sector_count && !error is
true, we go to a branch that ends with "break". If this condition is
false, the "while" loop will not be executed again. So, the loop can't be
executed more than once.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: don't report "detected capacity change" on device creation

When a DM device is first created it doesn't yet have an established
capacity, therefore the use of set_capacity_and_notify() should be
conditional given the potential for needless pr_info "detected
capacity change" noise even if capacity is 0.

One could argue that the pr_info() in set_capacity_and_notify() is
misplaced, but that position is not held uniformly.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: f64d9b2eacb9 ("dm: use set_capacity_and_notify")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix deadlock when swapping to encrypted device

The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.

This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.

Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.

This is similar to request-based drivers - they will also block when the
number of requests is over the limit.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add support for passing through inline crypto support

Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.

This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.

Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)

A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.

For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.

Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm table: fix DAX iterate_devices based device capability checks

Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.

Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: cleanup of front padding calculation

Add two helper macros calculating the offset of bio in struct dm_io and
struct dm_target_io respectively.

Besides, simplify the front padding calculation in
dm_alloc_md_mempools().

Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: store a block_device pointer in struct bio

Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: eliminate potential source of excessive kernel log noise

There wasn't ever a real need to log an error in the kernel log for
ioctls issued with insufficient permissions. Simply return an error
and if an admin/user is sufficiently motivated they can enable DM's
dynamic debugging to see an explanation for why the ioctls were
disallowed.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: e980f62353c6 ("dm: don't allow ioctls to targets that don't map to whole devices")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove unnecessary current->bio_list check when submitting split bio

The depth-first splitting is introduced in commit 18a25da84354 ("dm:
ensure bio submission follows a depth-first tree walk"), which is used
to fix the potential deadlock in case of the misordering handling of
bios caused by bio_list. There're two paths submitting split bios,
dm_wq_work() from worker thread and submit_bio() from application. Back
upon that time, dm_wq_work() thread calls __split_and_process_bio()
directly and thus will not trigger this issue since bio_list doesn't
exist here. So this issue will only be triggered from application
calling submit_bio(), and the fix has to check if current->bio_list is
non-NULL to distinguish this case.

However since commit 0c2915b8c6db1 ("dm: fix missing imposition of
queue_limits from dm_wq_work() thread"), dm_wq_work() thread calls
submit_bio_noacct() and thus also uses bio_list. Since then all entries
into __split_and_process_bio() are under protection of bio_list, and
thus the checking of current->bio_list when determinning if the
depth-first principle should be used, seems kind of nonsense. After all
the checking always succeeds now.

Fixes: 0c2915b8c6db1 ("dm: fix missing imposition of queue_limits from dm_wq_work() thread")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove invalid sparse __acquires and __releases annotations

Fixes sparse warnings:
drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit
drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit

Fixes: 971888c46993f ("dm: hold DM table for duration of ioctl rather than use blkdev_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix double RCU unlock in dm_dax_zero_page_range() error path

Remove redundant dm_put_live_table() in dm_dax_zero_page_range() error
path to fix sparse warning:
drivers/md/dm.c:1208:9: warning: context imbalance in 'dm_dax_zero_page_range' - unexpected unlock

Fixes: cdf6cdcd3b99a ("dm,dax: Add dax zero_page_range operation")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix IO splitting

Commit 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.

And commit 5091cdec56fa ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).

Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.

Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.

Fixes: 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>

block: remove the request_queue argument to the block_bio_remap tracepoint

The request_queue can trivially be derived from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the request_queue argument to the block_split tracepoint

The request_queue can trivially be derived from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: stop using bdget_disk for partition 0

We can just dereference the point in struct gendisk instead. Also
remove the now unused export.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: switch partition lookup to use struct block_device

Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: allocate struct hd_struct as part of struct bdev_inode

Allocate hd_struct together with struct block_device to pre-load
the lifetime rule changes in preparation of merging the two structures.

Note that part0 was previously embedded into struct gendisk, but is
a separate allocation now, and already points to the block_device instead
of the hd_struct. The lifetime of struct gendisk is still controlled by
the struct device embedded in the part0 hd_struct.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove the block_device reference in struct mapped_device

Get rid of the long-lasting struct block_device reference in
struct mapped_device. The only remaining user is the freeze code,
where we can trivially look up the block device at freeze time
and release the reference at thaw time.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: simplify flush_bio initialization in __send_empty_flush

We don't really need the struct block_device to initialize a bio. So
switch from using bio_set_dev to manually setting up bi_disk (bi_partno
will always be zero and has been cleared by bio_init already).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fs: simplify freeze_bdev/thaw_bdev

Store the frozen superblock in struct block_device to avoid the awkward
interface that can return a sb only used a cookie, an ERR_PTR or NULL.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix bug with RCU locking in dm_blk_report_zones

The dm_get_live_table() function makes RCU read lock so
dm_put_live_table() must be called even if dm_table map is not found.

Fixes: e76239a3748c9 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: use set_capacity_and_notify

Use set_capacity_and_notify to set the size of both the disk and block
device. This also gets the uevent notifications for the resize for free.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove __blkdev_driver_ioctl

Just open code it in the few callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix request-based DM to not bounce through indirect dm_submit_bio

It is unnecessary to force request-based DM to call into bio-based
dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then
call blk_mq_submit_bio().

Fix this by establishing a request-based DM block_device_operations
(dm_rq_blk_dops, which doesn't have .submit_bio) and update
dm_setup_md_queue() to set md->disk->fops to it for
DM_TYPE_REQUEST_BASED.

Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport
blk_mq_submit_bio.

Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove special-casing of bio-based immutable singleton target on NVMe

Since commit 5a6c35f9af416 ("block: remove direct_make_request") there
is no benefit to DM special-casing NVMe. Remove all code used to
establish DM_TYPE_NVME_BIO_BASED.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: make bio_crypt_clone() able to fail

bio_crypt_clone() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.

However, bio_crypt_clone() might be called with GFP_ATOMIC via
setup_clone() in drivers/md/dm-rq.c, or with GFP_NOWAIT via
kcryptd_io_read() in drivers/md/dm-crypt.c.

Neither case is currently reachable with a bio that actually has an
encryption context. However, it's fragile to rely on this. Just make
bio_crypt_clone() able to fail, analogous to bio_integrity_clone().

Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Satya Tangirala <satyat@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix comment in __dm_suspend()

Fix stale references to functions that have been renamed and fix typo.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fold dm_process_bio() into dm_submit_bio()

dm_process_bio() is only called by dm_submit_bio(), there is no benefit
to keeping dm_process_bio() factored out, so fold it.

While at it, cleanup dm_submit_bio()'s DMF_BLOCK_IO_FOR_SUSPEND related
branching and expand scope of dm_get_live_table() rcu reference on map
via common 'out' label to dm_put_live_table().

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix missing imposition of queue_limits from dm_wq_work() thread

If a DM device was suspended when bios were issued to it, those bios
would be deferred using queue_io(). Once the DM device was resumed
dm_process_bio() could be called by dm_wq_work() for original bio that
still needs splitting. dm_process_bio()'s check for current->bio_list
(meaning call chain is within ->submit_bio) as a prerequisite for
calling blk_queue_split() for "abnormal IO" would result in
dm_process_bio() never imposing corresponding queue_limits
(e.g. discard_granularity, discard_max_bytes, etc).

Fix this by always having dm_wq_work() resubmit deferred bios using
submit_bio_noacct().

Side-effect is blk_queue_split() is always called for "abnormal IO" from
->submit_bio, be it from application thread or dm_wq_work() workqueue,
so proper bio splitting and depth-first bio submission is performed.
For sake of clarity, remove current->bio_list check before call to
blk_queue_split().

Also, remove dm_wq_work()'s use of dm_{get,put}_live_table() -- no
longer needed since IO will be reissued in terms of ->submit_bio.
And rename bio variable from 'c' to 'bio'.

Fixes: cf9c37865557 ("dm: fix comment in dm_process_bio()")
Reported-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm table: make 'struct dm_table' definition accessible to all of DM core

Move 'struct dm_table' definition from dm-table.c to dm-core.h and
update DM core to access its members directly.

Helps optimize max_io_len() and other methods slightly.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: eliminate need for start_io_acct() forward declaration

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: simplify __process_abnormal_io()

Only call bio_op() once in switch statement. Also remove the
excessive factoring out to one line functions.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: push use of on-stack flush_bio down to __send_empty_flush()

Eliminates duplicate code, no functional change.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: optimize max_io_len() by inlining max_io_len_target_boundary()

Saves redundant dm_target_offset() math.

Also, reverse argument order for max_io_len() to be consistent with
other similar functions.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: push md->immutable_target optimization down to __process_bio()

Also, update associated stale comment in __bind().

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: change max_io_len() to use blk_max_size_offset()

Using blk_max_size_offset() enables DM core's splitting to impose
ti->max_io_len (via q->limits.chunk_sectors) and also fallback to
respecting q->limits.max_sectors if chunk_sectors isn't set.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add support for REQ_NOWAIT and enable it for linear target

Add DM target feature flag DM_TARGET_NOWAIT which advertises that
target works with REQ_NOWAIT bios.

Add dm_table_supports_nowait() and update dm_table_set_restrictions()
to set/clear QUEUE_FLAG_NOWAIT accordingly.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix comment in dm_process_bio()

Refer to the correct function (->submit_bio instead of ->queue_bio).
Also, add details about why using blk_queue_split() isn't needed for
dm_wq_work()'s call to dm_process_bio().

Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix bio splitting and its bio completion order for regular IO

dm_queue_split() is removed because __split_and_process_bio() _must_
handle splitting bios to ensure proper bio submission and completion
ordering as a bio is split.

Otherwise, multiple recursive calls to ->submit_bio will cause multiple
split bios to be allocated from the same ->bio_split mempool at the same
time. This would result in deadlock in low memory conditions because no
progress could be made (only one bio is available in ->bio_split
mempool).

This fix has been verified to still fix the loss of performance, due
to excess splitting, that commit 120c9257f5f1 provided.

Fixes: 120c9257f5f1 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"")
Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm/dax: Fix table reference counts

A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:

# lvm2-testsuite --only pvmove-abort-all.sh

WARNING: lock held when returning to user space!
5.9.0-rc5+ #251 Tainted: G OE
------------------------------------------------
lvm/1318 is leaving the kernel with locks still held!
1 lock held by lvm/1318:
#0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]

...and later on this hang signature:

INFO: task lvm:1344 blocked for more than 122 seconds.
Tainted: G OE 5.9.0-rc5+ #251
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000
Call Trace:
__schedule+0x45f/0xa80
? finish_task_switch+0x249/0x2c0
? wait_for_completion+0x86/0x110
schedule+0x5f/0xd0
schedule_timeout+0x212/0x2a0
? __schedule+0x467/0xa80
? wait_for_completion+0x86/0x110
wait_for_completion+0xb0/0x110
__synchronize_srcu+0xd1/0x160
? __bpf_trace_rcu_utilization+0x10/0x10
__dm_suspend+0x6d/0x210 [dm_mod]
dm_suspend+0xf6/0x140 [dm_mod]

Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

block: fix locking for struct block_device size updates

Two different callers use two different mutexes for updating the
block device size, which obviously doesn't help to actually protect
against concurrent updates from the different callers. In addition
one of the locks, bd_mutex is rather prone to deadlocks with other
parts of the block stack that use it for high level synchronization.

Switch to using a new spinlock protecting just the size updates, as
that is all we need, and make sure everyone does the update through
the proper helper.

This fixes a bug reported with the nvme revalidating disks during a
hot removal operation, which can currently deadlock on bd_mutex.

Reported-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

dm: don't call report zones for more than the user requested

Don't call report zones for more zones than the user actually requested,
otherwise this can lead to out-of-bounds accesses in the callback
functions.

Such a situation can happen if the target's ->report_zones() callback
function returns 0 because we've reached the end of the target and then
restart the report zones on the second target.

We're again calling into ->report_zones() and ultimately into the user
supplied callback function but when we're not subtracting the number of
zones already processed this may lead to out-of-bounds accesses in the
user callbacks.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: d41003513e61 ("block: rework zone reporting")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm integrity: fix integrity recalculation that is improperly skipped

Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.

The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.

To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().

Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

writeback: remove bdi->congested_fn

Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures. And
pktdvd is a deprecated driver that isn't useful in stack setup
either. So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

writeback: remove struct bdi_writeback_congested

We never set any congested bits in the group writeback instances of it.
And for the simpler bdi-wide case a simple scalar field is all that
that is needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: use noio when sending kobject event

kobject_uevent may allocate memory and it may be called while there are dm
devices suspended. The allocation may recurse into a suspended device,
causing a deadlock. We must set the noio flag when sending a uevent.

The observed deadlock was reported here:
https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html

Reported-by: Khazhismel Kumykov <khazhy@google.com>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: use bio_uninit instead of bio_disassociate_blkg

bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: do not use waitqueue for request-based DM

Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to
determine if outstanding IO has completed (and DM has no control over
the blk-mq state machine used to track outstanding IO) it is unsafe to
wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a
request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE). As
such dm_wait_for_completion() could be left to wait indefinitely if no
other requests complete.

Fix this by eliminating request-based DM's use of waitqueue to wait
for blk-mq requests to complete in dm_wait_for_completion.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Depends-on: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove unused variable

Since merging the commit identified in Fixes below, we trigger this
compile time warning:

drivers/md/dm.c: In function ‘__map_bio’:
drivers/md/dm.c:1296:24: warning: unused variable ‘md’ [-Wunused-variable]
1296 | struct mapped_device *md = io->md;
| ^~

Remove the 'md' variable.

Fixes: 5a6c35f9af41 ("block: remove direct_make_request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove direct_make_request

Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: rename generic_make_request to submit_bio_noacct

generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move ->make_request_fn to struct block_device_operations

The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove the request_queue argument from blk_queue_split

The queue can be trivially derived from the bio, so pass one less
argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: use bio_uninit instead of bio_disassociate_blkg

bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: update original bio sector on Zone Append

Naohiro reported that issuing zone-append bios to a zoned block device
underneath a dm-linear device does not work as expected.

This because we forgot to reverse-map the sector the device wrote to the
original bio.

For zone-append bios, get the offset in the zone of the written sector
from the clone bio and add that to the original bio's sector position.

Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org
Reported-by: Naohiro Aota <Naohiro.Aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: use bio_{start,end}_io_acct

Switch dm to use the nicer bio accounting helpers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: use DMDEBUG macros now that they use pr_debug variants

Now that DMDEBUG uses pr_debug and DMDEBUG_LIMIT uses
pr_debug_ratelimited cleanup DM's 2 direct pr_debug callers to use
them to get the benefit of consistent DM_FMT formatting of debugging
messages.

While doing so, dm-mpath.c:dm_report_EIO() was switched over to using
DMDEBUG_LIMIT due to the potential for error handling floods in the IO
completion path.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

blk-mq: allow blk_mq_make_request to consume the q_usage_counter reference

blk_mq_make_request currently needs to grab an q_usage_counter
reference when allocating a request. This is because the block layer
grabs one before calling blk_mq_make_request, but also releases it as
soon as blk_mq_make_request returns. Remove the blk_queue_exit call
after blk_mq_make_request returns, and instead let it consume the
reference. This works perfectly fine for the block layer caller, just
device mapper needs an extra reference as the old problem still
persists there. Open code blk_queue_enter_live in device mapper,
as there should be no other callers and this allows better documenting
why we do a non-try get.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm mpath: pass IO start time to path selector

The HST path selector needs this information to perform path
prediction. For request-based mpath, struct request's io_start_time_ns
is used, while for bio-based, use the start_time stored in dm_io.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: Inline encryption support for blk-mq

We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.

We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.

We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.

Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.

Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.

Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: bypass ->make_request_fn for blk-mq drivers

Call blk_mq_make_request when no ->make_request_fn is set. This is
safe now that blk_alloc_queue always sets up the pointer for make_request
based drivers. This avoids an indirect call in the blk-mq driver I/O
fast path, which is rather expensive due to spectre mitigations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "dm: always call blk_queue_split() in dm_process_bio()"

This reverts commit effd58c95f277744f75d6e08819ac859dbcbd351.

blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.

"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes). Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).

Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:

xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev

before this revert:

253,0 21 1 0.000000000 2206 Q R 224 + 4072 [xfs_io]
253,0 21 2 0.000008267 2206 X R 224 / 480 [xfs_io]
253,0 21 3 0.000010530 2206 X R 224 / 256 [xfs_io]
253,0 21 4 0.000027022 2206 X R 480 / 736 [xfs_io]
253,0 21 5 0.000028751 2206 X R 480 / 512 [xfs_io]
253,0 21 6 0.000033323 2206 X R 736 / 992 [xfs_io]
253,0 21 7 0.000035130 2206 X R 736 / 768 [xfs_io]
253,0 21 8 0.000039146 2206 X R 992 / 1248 [xfs_io]
253,0 21 9 0.000040734 2206 X R 992 / 1024 [xfs_io]
253,0 21 10 0.000044694 2206 X R 1248 / 1504 [xfs_io]
253,0 21 11 0.000046422 2206 X R 1248 / 1280 [xfs_io]
253,0 21 12 0.000050376 2206 X R 1504 / 1760 [xfs_io]
253,0 21 13 0.000051974 2206 X R 1504 / 1536 [xfs_io]
253,0 21 14 0.000055881 2206 X R 1760 / 2016 [xfs_io]
253,0 21 15 0.000057462 2206 X R 1760 / 1792 [xfs_io]
253,0 21 16 0.000060999 2206 X R 2016 / 2272 [xfs_io]
253,0 21 17 0.000062489 2206 X R 2016 / 2048 [xfs_io]
253,0 21 18 0.000066133 2206 X R 2272 / 2528 [xfs_io]
253,0 21 19 0.000067507 2206 X R 2272 / 2304 [xfs_io]
253,0 21 20 0.000071136 2206 X R 2528 / 2784 [xfs_io]
253,0 21 21 0.000072764 2206 X R 2528 / 2560 [xfs_io]
253,0 21 22 0.000076185 2206 X R 2784 / 3040 [xfs_io]
253,0 21 23 0.000077486 2206 X R 2784 / 2816 [xfs_io]
253,0 21 24 0.000080885 2206 X R 3040 / 3296 [xfs_io]
253,0 21 25 0.000082316 2206 X R 3040 / 3072 [xfs_io]
253,0 21 26 0.000085788 2206 X R 3296 / 3552 [xfs_io]
253,0 21 27 0.000087096 2206 X R 3296 / 3328 [xfs_io]
253,0 21 28 0.000093469 2206 X R 3552 / 3808 [xfs_io]
253,0 21 29 0.000095186 2206 X R 3552 / 3584 [xfs_io]
253,0 21 30 0.000099228 2206 X R 3808 / 4064 [xfs_io]
253,0 21 31 0.000101062 2206 X R 3808 / 3840 [xfs_io]
253,0 21 32 0.000104956 2206 X R 4064 / 4096 [xfs_io]
253,0 21 33 0.001138823 0 C R 4096 + 200 [0]

after this revert:

253,0 18 1 0.000000000 4430 Q R 224 + 3896 [xfs_io]
253,0 18 2 0.000018359 4430 X R 224 / 256 [xfs_io]
253,0 18 3 0.000028898 4430 X R 256 / 512 [xfs_io]
253,0 18 4 0.000033535 4430 X R 512 / 768 [xfs_io]
253,0 18 5 0.000065684 4430 X R 768 / 1024 [xfs_io]
253,0 18 6 0.000091695 4430 X R 1024 / 1280 [xfs_io]
253,0 18 7 0.000098494 4430 X R 1280 / 1536 [xfs_io]
253,0 18 8 0.000114069 4430 X R 1536 / 1792 [xfs_io]
253,0 18 9 0.000129483 4430 X R 1792 / 2048 [xfs_io]
253,0 18 10 0.000136759 4430 X R 2048 / 2304 [xfs_io]
253,0 18 11 0.000152412 4430 X R 2304 / 2560 [xfs_io]
253,0 18 12 0.000160758 4430 X R 2560 / 2816 [xfs_io]
253,0 18 13 0.000183385 4430 X R 2816 / 3072 [xfs_io]
253,0 18 14 0.000190797 4430 X R 3072 / 3328 [xfs_io]
253,0 18 15 0.000197667 4430 X R 3328 / 3584 [xfs_io]
253,0 18 16 0.000218751 4430 X R 3584 / 3840 [xfs_io]
253,0 18 17 0.000226005 4430 X R 3840 / 4096 [xfs_io]
253,0 18 18 0.000250404 4430 Q R 4120 + 176 [xfs_io]
253,0 18 19 0.000847708 0 C R 4096 + 24 [0]
253,0 18 20 0.000855783 0 C R 4120 + 176 [0]

Fixes: effd58c95f27774 ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dax: Move mandatory ->zero_page_range() check in alloc_dax()

zero_page_range() dax operation is mandatory for dax devices. Right now
that check happens in dax_zero_page_range() function. Dan thinks that's
too late and its better to do the check earlier in alloc_dax().

I also modified alloc_dax() to return pointer with error code in it in
case of failure. Right now it returns NULL and caller assumes failure
happened due to -ENOMEM. But with this ->zero_page_range() check, I
need to return -EINVAL instead.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm,dax: Add dax zero_page_range operation

This patch adds support for dax zero_page_range operation to dm targets.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20200228163456.1587-5-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

block: simplify queue allocation

Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: move the part_stat* helpers from genhd.h to a new header

These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: fix congested_fn for request-based device

We neither assign congested_fn for requested-based blk-mq device nor
implement it correctly. So fix both.

Also, remove incorrect comment from dm_init_normal_md_queue and rename
it to dm_init_congested_fn.

Fixes: 4aa9c692e052 ("bdi: separate out congested state into a separate struct")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: report suspended device during destroy

The function dm_suspended returns true if the target is suspended.
However, when the target is being suspended during unload, it returns
false.

An example where this is a problem: the test "!dm_suspended(wc->ti)" in
writecache_writeback is not sufficient, because dm_suspended returns
zero while writecache_suspend is in progress. As is, without an
enhanced dm_suspended, simply switching from flush_workqueue to
drain_workqueue still emits warnings:
workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries

writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function
flushes the current work. However, the workqueue may re-queue itself and
flush_workqueue doesn't wait for re-queued works to finish. Because of
this - the function writecache_writeback continues execution after the
device was suspended and then concurrently with writecache_dtr, causing
a crash in writecache_writeback.

We must use drain_workqueue - that waits until the work and all re-queued
works finish.

As a prereq for switching to drain_workqueue, this commit fixes
dm_suspended to return true after the presuspend hook and before the
postsuspend hook - just like during a normal suspend. It allows
simplifying the dm-integrity and dm-writecache targets so that they
don't have to maintain suspended flags on their own.

With this change use of drain_workqueue() can be used effectively. This
change was tested with the lvm2 testsuite and cryptsetup testsuite and
the are no regressions.

Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Reported-by: Corey Marthaler <cmarthal@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix potential for q->make_request_fn NULL pointer

Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).

Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt

While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.

Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: rework zone reporting

Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Remove partition support for zoned block devices

No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Simplify report zones execution

All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.

This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: add zone open, close and finish support

Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.

Contains contributions from Matias Bjorling, Hans Holmberg and
Damien Le Moal.

Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: make dm_table_find_target return NULL

Currently, if we pass too high sector number to dm_table_find_target, it
returns zeroed dm_target structure and callers test if the structure is
zeroed with the macro dm_target_is_valid.

However, returning NULL is common practice to indicate errors.

This patch refactors the dm code, so that dm_table_find_target returns
NULL and its callers test the returned value for NULL. The macro
dm_target_is_valid is deleted. In alloc_targets, we no longer allocate an
extra zeroed target.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

block: Kill gfp_t argument of blkdev_report_zones()

Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: enable synchronous dax

This patch sets dax device 'DAXDEV_SYNC' flag if all the target
devices of device mapper support synchrononous DAX. If device
mapper consists of both synchronous and asynchronous dax devices,
we don't set 'DAXDEV_SYNC' flag.

'dm_table_supports_dax' is refactored to pass 'iterate_devices_fn'
as argument so that the callers can pass the appropriate functions.

Suggested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

libnvdimm: add dax_dev sync flag

This patch adds 'DAXDEV_SYNC' flag which is set
for nd_region doing synchronous flush. This later
is used to disable MAP_SYNC functionality for
ext4 & xfs filesystem for devices don't support
synchronous flush.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: make sure to obey max_io_len_target_boundary

Commit 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM
target interface") incorrectly removed code from
__send_changing_extent_only() that is required to impose a per-target IO
boundary on IO that exceeds max_io_len_target_boundary(). Otherwise
"special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond
where allowed.

Fix this by restoring the max_io_len_target_boundary() limit in
__send_changing_extent_only()

Fixes: 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Michael Lass <bevan@bi-co.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dax: Arrange for dax_supported check to span multiple devices

Pankaj reports that starting with commit ad428cdb525a "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.

Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.

Fixes: ad428cdb525a ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: fix a couple brace coding style issues

Signed-off-by: Sheetal Singala <2396sheetal@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: only initialize md->dax_dev if CONFIG_DAX_DRIVER is enabled

md->dax_dev defaults to NULL and there is no need to initialize it
if CONFIG_DAX_DRIVER is disabled.

Signed-off-by: Peng Wang <rocking@whu.edu.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: disable DISCARD if the underlying storage no longer supports it

Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.

The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808

The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.

Fix this by training DM core to disable DISCARD if the underlying
storage already did so.

Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.

Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")

The limit was already incorporated to dm-crypt with commit 4e870e948fba
("dm crypt: fix error with too large bios"), so we don't need to apply
it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is
wrong anyway because the variable ti->max_io_len it is supposed to be in
the units of 512-byte sectors not in bytes.

Reduction of the limit to 1048576 sectors could even cause data
corruption in rare cases - suppose that we have a dm-striped device with
stripe size 768MiB. The target will call dm_set_target_max_io_len with
the value 1572864. The buggy code would reduce it to 1048576. Now, the
dm-core will errorneously split the bios on 1048576-sector boundary
insetad of 1572864-sector boundary and pass these stripe-crossing bios
to the striped target.

Cc: stable@vger.kernel.org # v4.16+
Fixes: 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: always call blk_queue_split() in dm_process_bio()

Do not just call blk_queue_split() if the bio is_abnormal_io().

Fixes: 568c73a355e ("dm: update dm_process_bio() to split bio if in ->make_request_fn()")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: remove unused _rq_tio_cache and _rq_cache

Also move dm_rq_target_io structure definition from dm-rq.h to dm-rq.c

Fixes: 6a23e05c2fe3c6 ("dm: remove legacy request-based IO path")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: eliminate 'split_discard_bios' flag from DM target interface

There is no need to have DM core split discards on behalf of a DM target
now that blk_queue_split() handles splitting discards based on the
queue_limits. A DM target just needs to set max_discard_sectors,
discard_granularity, etc, in queue_limits.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: update dm_process_bio() to split bio if in ->make_request_fn()

Must call blk_queue_split() otherwise queue_limits for abnormal requests
(e.g. discard, writesame, etc) won't be imposed.

In addition, add dm_queue_split() to simplify DM specific splitting that
is needed for targets that impose ti->max_io_len.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: don't use bio_trim() afterall

bio_trim() has an early return, which makes it _not_ idempotent, if the
offset is 0 and the bio's bi_size already matches the requested size.
Prior to DM, all users of bio_trim() were fine with this. But DM has
exposed the fact that bio_trim()'s early return is incompatible with a
cloned bio whose integrity payload must be trimmed via
bio_integrity_trim().

Fix this by reverting DM back to doing the equivalent of bio_trim() but
in an idempotent manner (so bio_integrity_trim is always performed).

Follow-on work is needed to assess what benefit bio_trim()'s early
return is providing to its existing callers.

Reported-by: Milan Broz <gmazyland@gmail.com>
Fixes: 57c36519e4b94 ("dm: fix clone_bio() to trigger blk_recount_segments()")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add memory barrier before waitqueue_active

Block core changes to switch bio-based IO accounting to be percpu had a
side-effect of altering DM core to now rely on calling waitqueue_active
(in both bio-based and request-based) to check if another task is in
dm_wait_for_completion().

A memory barrier is needed before calling waitqueue_active(). DM core
doesn't piggyback on a preceding memory barrier so it must explicitly
use its own.

For more details on why using waitqueue_active() without a preceding
barrier is unsafe, please see the comment before the waitqueue_active()
definition in include/linux/wait.h.

Add the missing memory barrier by switching to using wq_has_sleeper().

Fixes: 6f75723190d8 ("dm: remove the pending IO accounting")
Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: add missing trace_block_split() to __split_and_process_bio()

Provides useful context about bio splits in blktrace.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriate

Otherwise targets that don't support/expect IO splitting could resubmit
bios using code paths with unnecessary IO splitting complexity.

Depends-on: 24113d487843 ("dm: avoid indirect call in __dm_make_request")
Fixes: 978e51ba38e00 ("dm: optimize bio-based NVMe IO submission")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix redundant IO accounting for bios that need splitting

The risk of redundant IO accounting was not taken into consideration
when commit 18a25da84354 ("dm: ensure bio submission follows a
depth-first tree walk") introduced IO splitting in terms of recursion
via generic_make_request().

Fix this by subtracting the split bio's payload from the IO stats that
were already accounted for by start_io_acct() upon dm_make_request()
entry. This repeat oscillation of the IO accounting, up then down,
isn't ideal but refactoring DM core's IO splitting to pre-split bios
_before_ they are accounted turned out to be an excessive amount of
change that will need a full development cycle to refine and verify.

Before this fix:

/dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so
bios are split on 32k boundaries.

# fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \
--iodepth=1 --ioengine=libaio --direct=1 --refill_buffers

with debugging added:
[103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128
[103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio:
[103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64
...

16M written yet 136M (278528 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
278528

After this fix:

16M written and 16M (32768 * 512b) accounted:
# cat /sys/block/dm-2/stat | awk '{ print $7 }'
32768

Fixes: 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk")
Cc: stable@vger.kernel.org # 4.16+
Reported-by: Bryan Gurney <bgurney@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: fix clone_bio() to trigger blk_recount_segments()

DM's clone_bio() now benefits from using bio_trim() by fixing the fact
that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
which triggers blk_recount_segments() via bio_phys_segments().

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm: don't reuse bio for flushes

DM currently has a statically allocated bio that it uses to issue empty
flushes. It doesn't submit this bio, it just uses it for maintaining
state while setting up clones. Multiple users can access this bio at the
same time. This wasn't previously an issue, even if it was a bit iffy,
but with the blkg associations it can become one.

We setup the blkg association, then clone bio's and submit, then remove
the blkg assocation again. But since we can have multiple tasks doing
this at the same time, against multiple blkg's, then we can either lose
references to a blkg, or put it twice. The latter causes complaints on
the percpu ref being <= 0 when released, and can cause use-after-free as
well. Ming reports that xfstest generic/475 triggers this:

------------[ cut here ]------------
percpu ref (blkg_release) <= 0 (0) after switching to atomic
WARNING: CPU: 13 PID: 0 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x2c9/0x4a0

Switch to just using an on-stack bio for this, and get rid of the
embedded bio.

Fixes: 5cdf2e3fea5e ("blkcg: associate blkg when associating a device")
Reported-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>