drm/nouveau/gsp/r535: add interrupt handling

Fetches the interrupt table from RM, and hooks up the GSP interrupt
handler to message queue processing to catch async messages.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-36-skeggsb@gmail.com

drm/nouveau/gsp/r535: add support for booting GSP-RM

This commit adds the initial code needed to boot the GSP-RM firmware
provided by NVIDIA, bringing with it the beginnings of Ada support.

Until it's had more testing and time to bake, support is disabled by
default (except on Ada). GSP-RM usage can be enabled by passing the
"config=NvGspRm=1" module option.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-33-skeggsb@gmail.com

drm/nouveau/fifo: remove left-over references to nvkm_fifo_chan

This was renamed to nvkm_chan in the host rework.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-5-skeggsb@gmail.com

drm/nouveau/acr/ga102: initial support

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/fb/ga102: load and boot VPR scrubber FW

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/acr: use common falcon HS FW code for ACR FWs

Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.

- gv100 split from gp108 to handle FW exit status differences

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)

Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.

ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).

The VPR scrubber code is fairly independent, and a good first target.

- adds better debug output to fw loading process, to ease bring-up/debug

v2:
- whitespace, 0->false

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: rework falcon reset

Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu/gm20b,gp10b: boot RTOS from PMU init

Cleanup before falcon changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new channel lookup interfaces

- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock

v2:
- remove unnecessary parenthesis

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: remove unused functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/sec: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/ce: switch to instanced constructor

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: reset sec2/gsp falcons harder

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: specify queue register offsets from subdev

Also fixes the values for Turing, even though we don't use it yet.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: specify debug/production register offset from subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: specify EMEM address from subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: specify FBIF offset from subdev

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: export existing funcs

These will be used in upcoming commits which will provide more customisation.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/flcn: move fetching of configuration until first use

We want to be able to register falcons with ACR during the constructor for
the subdev it belongs to, however, we may not have access to the falcon's
registers prior to DEVINIT.

Delay touching registers until the first time the falcon is acquired.

This may temporarily break secboot on non-production boards due to not
being able to determine whether the falcon is in debug or production mode,
the new ACR subdev will not have this issue, and it's not a use-case that's
terribly important for bisectability.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix bogus GPL-2 license header

The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.

Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/mmu: handle instance block setup

We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.

It makes more sense to handle this in a common location.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core/device: remove object include to prevent unnecessary rebuilds

nvkm_device hasn't subclassed nvkm_object in a long time.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot: add support for SEC LS firmware

Support running a message queue firmware on SEC.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: support for EMEM

On SEC, DMEM is unaccessible by the CPU when the falcon is running in LS
mode. This makes communication with the firmware using DMEM impossible.

For this purpose, a new kind of memory (EMEM) has been added. It works
similarly to DMEM, with the difference that its address space starts at
0x1000000. For this reason, it makes sense to treat it like a special
case of DMEM.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: delay construction of falcons to oneinit()

Reading registers at device construction time can be harmful, as there
is no guarantee the underlying engine will be up, or in its runtime
configuration. Defer register reading to the oneinit() hook and update
users accordingly.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: protect against concurrent DMEM accesses

The falcon library may be used concurrently, especially after the
introduction of the msgqueue interface. Make it safe to use it that way.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: add falcon library functions

Falcon processors are used in various places of GPU chips. Although there
exist different versions of the falcon, and some variants exist, the
base set of actions performed on them is the same, which results in lots
of duplicated code.

This patch consolidates the current nvkm_falcon structure and extends it
with the following features:

* Ability for an engine to obtain and later release a given falcon,
* Abstractions for basic operations (IMEM/DMEM access, start, etc)
* Abstractions for secure operations if a falcon is secure

Abstractions make it easy to e.g. start a falcon, without having to care
about its details. For instance, falcons in secure mode need to be
started by writing to a different register.

Right now the abstractions variants only cover secure vs. non-secure
falcon, but more will come as e.g. SEC2 support is added.

This is still a WIP as other functions previously done by
engine/falcon.c need to be reimplemented. However this first step allows
to keep things simple and to discuss basic design.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: remove pmc_enable argument from subdev ctor

These are now specified directly in the MC subdev.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: convert to new-style nvkm_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: convert user classes to new-style nvkm_object

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: remove dependence on namedb/engctx lookup

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: directly use instmem for ucode image

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: remove object accessor functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mspdec: cosmetic changes

This is purely preparation for upcoming commits, there should be no
code changes here.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce: cosmetic changes

This is purely preparation for upcoming commits, there should be no
code changes here.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/falcon: cosmetic changes

This is purely preparation for upcoming commits, there should be no
code changes here.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: namespace + nvidia gpu names (no binary change)

The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).

Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.

A comparison of objdump disassemblies proves no code changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove symlinks, move core/ to nvkm/ (no code changes)

The symlinks were annoying some people, and they're not used anywhere
else in the kernel tree. The include directory structure has been
changed so that symlinks aren't needed anymore.

NVKM has been moved from core/ to nvkm/ to make it more obvious as to
what the directory is for, and as some minor prep for when NVKM gets
split out into its own module (virt) at a later date.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>