drm/i915/mtl: Synchronize i915/BIOS on C6 enabling

If BIOS enables/disables C6, i915 should do the same. Also, retain
this value across driver reloads. This is needed only for MTL as
of now due to an existing bug in OA which needs C6 disabled for
it to function. BIOS behavior is also different across platforms
in terms of how C6 is enabled.

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-3-umesh.nerlige.ramappa@intel.com

drm/i915/gt: Use RC6 residency types as arguments to residency functions

Previously RC6 residency functions directly accepted RC6 residency register
MMIO offsets (there are four RC6 residency registers). This worked but
required an assumption on the residency register layout so was not future
proof.

Therefore change RC6 residency functions to accept RC6 residency types
instead of register MMIO offsets. The knowledge of register offsets as well
as ID to offset mapping is now maintained solely in intel_rc6 and can be
tailored for different platforms and different register layouts as need
arises.

v2: Address review comments by Jani N
- Change residency functions to accept RC6 residency types instead of
register ID's
- s/intel_rc6_print_rc5_res/intel_rc6_print_residency/
- Remove "const enum" in function arguments
- Naming: intel_rc6_* for enum
- Use INTEL_RC6_RES_MAX and other minor changes
v3: Don't include intel_rc6_types.h in intel_rc6.h (Jani)

Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114123348.3474216-5-badal.nilawar@intel.com

drm/i915: Only include i915_reg.h from .c files

Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.

We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.

There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com

drm/i915/gt: SPDX cleanup

Clean up the SPDX licence declarations to comply with checkpatch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/gt: Simplify rc6 w/a application

Quite simply we only need to check for prior corruption on enabling rc6
on module load and resume, so by hooking into the common entry points.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202110836.2342685-2-chris@chris-wilson.co.uk

drm/i915/gt: Use soft-rc6 for w/a protection

Now that we have soft-rc6 in place, we can use that instead of the
forcewake to disable rc6 while active; preferred by a few
microbenchmarks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202110836.2342685-1-chris@chris-wilson.co.uk

drm/i915/gt: Manual rc6 entry upon parking

Now that we rapidly park the GT when the GPU idles, we often find
ourselves idling faster than the RC6 promotion timer. Thus if we tell
the GPU to enter RC6 manually as we park, we can do so quicker (by
around 50ms, half an EI on average) and marginally increase our
powersaving across all execlists platforms.

v2: Now with a selftest to check we can enter RC6 manually

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127095657.3209854-1-chris@chris-wilson.co.uk

drm/i915/gen8+: Add RC6 CTX corruption WA

In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.

v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: Extract GT render sleep (rc6) management

Continuing the theme of breaking intel_pm.c up in a reasonable chunk of
powermanagement utilities, pull out the rc6 setup into its GT handler.

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919143840.20384-1-andi.shyti@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190927110849.28734-1-chris@chris-wilson.co.uk