drm/i915/hdcp: HDCP Capability for the downstream device

Currently we are only checking capability of remote device and not
immediate downstream device but during capability check we need are
concerned with only the HDCP capability of downstream device.
During i915_display_info reporting we need HDCP Capability for both
the monitors and downstream branch device if any this patch adds that.

--v2
-Use MST Hub HDCP version [Ankit]

--v3
-Redefined how we seprate remote and direct read to make sure HDMI
shim functions are not touched [Ankit]

--v4
- Fix the conditions so that hdcp_info with remote_req true is sent
only when encoder is mst [Ankit]

--v5
-No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit]

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com

drm/i915/hdcp: Rename hdcp capable functions

Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability
and hdcp_2_2_get_capability to properly reflect what these functions
are doing.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com

drm/i915: Add bigjoiner force enable option to debugfs

For validation purposes, it might be useful to be able to
force Bigjoiner mode, even if current dotclock/resolution
do not require that.
Lets add such to option to debugfs.

v2: - Apparently intel_dp_need_bigjoiner can't be used, when
debugfs entry is created so lets just check manually
the DISPLAY_VER.

v3: - Switch to intel_connector from drm_connector(Jani Nikula)
- Remove redundant modeset lock(Jani Nikula)
- Use kstrtobool_from_user for boolean value(Jani Nikula)

v4: - Apply the changes to proper function(Jani Nikula)

v5: - Removed unnecessary check from i915_bigjoiner_enable_show
(Ville Syrjälä)
- Added eDP connector check to intel_connector_debugfs_add
(Ville Syrjälä)
- Removed debug message in order to prevent dmesg flooding
(Ville Syrjälä)

v6: - Assume now always that m->private is intel_connector
- Fixed other similar conflicts

v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
- Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
manually.(Ville Syrjälä)

v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
(Jani Nikula)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com

drm/i915/opregion: move i915_opregion debugfs to intel_opregion.c

All things about opregion should be placed in intel_opregion.c.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c10103d2dd775edc1e9f93f09d0834480f880596.1704992868.git.jani.nikula@intel.com

drm/i915/bios: move i915_vbt debugfs to intel_bios.c

All things VBT should be placed in intel_bios.c.

While at it, shove in a FIXME comment about VBT possibly originating
from other places than opregion.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5e14a9559b6916022b506e5eb8d943783dc627a2.1704992868.git.jani.nikula@intel.com

drm/i915: use octal permissions in display debugfs

Octal permissions are preferred over the symbolics ones.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-3-jani.nikula@intel.com

drm/i915: pass struct intel_connector to connector debugfs fops

Prefer struct intel_connector over struct drm_connector, and unify the
declarations in the fops.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-2-jani.nikula@intel.com

drm/i915: use intel_connector in intel_connector_debugfs_add()

Prefer struct intel_connector over struct drm_connector.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-1-jani.nikula@intel.com

drm/i915/dsc: Add debugfs entry to validate DSC fractional bpp

DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show
to depict sink's precision.
Also, new debugfs entry is created to enforce fractional bpp.
If Force_DSC_Fractional_BPP_en is set then while iterating over
output bpp with fractional step size we will continue if output_bpp is
computed as integer. With this approach, we will be able to validate
DSC with fractional bpp.

v2:
Add drm_modeset_unlock to new line(Suraj)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-8-ankit.k.nautiyal@intel.com

drm/i915/display: Add framework to add parameters specific to display

Currently all module parameters are handled by i915_param.c/h. This
is a problem for display parameters when Xe driver is used. Add
a mechanism to add parameters specific to the display. This is mainly
copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This
is done by subsequent patches.

v2:
- Drop unused predefinition (dentry)
- Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com

drm/i915/display: debugfs entry to list display capabilities

Create a separate debugfs entry to list the display capabilities
IGT can rely on this debugfs entry for tests that depend on
display device and display runtime info for both xe and i915
drivers.

v2: rename the entry to i915_display_capabilities (Chaitanya)

Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-2-vinod.govindapillai@intel.com

drm/i915/dp: Use connector DSC DPCD in i915_dsc_fec_support_show()

Use the connector's DSC DPCD capabilities in i915_dsc_fec_support_show()
instead of the version stored in the encoder. Atm the two are identical,
but a follow-up patch will store the (MST) connector specific version
in the connector.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-6-imre.deak@intel.com

drm/i915/dp: Use i915/intel connector local variables in i915_dsc_fec_support_show()

Cache the i915 specific device and connector pointers in
i915_dsc_fec_support_show().

v2:
- s/Cahce/Cache typo in commit log. (Stan)

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-5-imre.deak@intel.com

drm/dp: switch drm_dp_downstream_*() helpers to struct drm_edid

Prefer struct drm_edid where possible. With limited users for the
drm_dp_downstream_*() helpers, this is fairly straightforward.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004162149.2802113-1-jani.nikula@intel.com

drm/i915: Introduce for_each_shared_dpll()

No one really cares how we store the shared_dplls. Currently
it happens to be an array, but we could change that to a more
flexible scheme at some point. Hide the implementation details
behind an iterator macro.

The slight downside is the pll variable moving out of the
loop scope, but maybe someday soon we'll start to convert
everything over to having declarations within for-statements...

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-4-ville.syrjala@linux.intel.com

drm/i915: Stop requiring PLL index == PLL ID

There's no good reason to keep around this PLL index == PLL ID
footgun. Get rid of it.

Both i915->shared_dplls[] and state->shared_dpll[] are indexed
by the same thing now, which is just the index we get at
initialization from dpll_mgr->dpll_info[]. The rest is all about
PLL IDs now.

v2: Add pll->index to mimic drm_crtc & co.
Remove the comment saying ID should match the index
v3: s/i/pll->index/ in debugfs loop (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-2-ville.syrjala@linux.intel.com

drm/i915/display: add lock while printing frontbuffer tracking bits to debugfs

Add missing spin_lock/unlock

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814163452.2925-1-juhapekka.heikkila@gmail.com

drm/i915: Simplify expression &to_i915(dev)->drm

to_i915 is defined as

container_of(dev, struct drm_i915_private, drm);

So for a struct drm_device *dev, to_i915(dev)->drm is just dev. Simplify
accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721212133.271118-1-u.kleine-koenig@pengutronix.de

drm/i915/debugfs: stop using edid_blob_ptr

Only the EDID code and sysfs should look at the EDID property. Stop
using it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602132321.3199445-1-jani.nikula@intel.com

drm/i915/hdmi: stop caching has_audio in struct intel_hdmi

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/710286536d6b07ba8aa068b65b2b2c0c7743220e.1685437500.git.jani.nikula@intel.com

drm/i915/dp: stop caching has_audio in struct intel_dp

Use the information stored in display info.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/695bbe8b5ebee6e492f95a1c818da15691752dc8.1685437500.git.jani.nikula@intel.com

drm/display/dp_mst: drop has_audio from struct drm_dp_mst_port

Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly
placed. Defer audio handling to drivers, and use the info from the
connector display info. i915 was the only one using it anyway.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d9eefdf150870479c5797f027d4c2b0a19ff583.1685437500.git.jani.nikula@intel.com

drm/i915: Relocate VBLANK_EVASION_TIME_US

Move the VBLANK_EVASION_TIME_US definition to a slightly
better place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/debugfs: New debugfs for display clock frequencies

Instead of mixing display & non-display stuff together, move
display specific clock info to new debugfs. This patch will
create a new debugfs "i915_cdclk_info" to expose Current & Max
cdclk and Max pixel clock frequency info.

Example:
$ cat /sys/kernel/debug/dri/0/i915_cdclk_info
Current CD clock frequency: 163200 kHz
Max CD clock frequency: 652800 kHz
Max pixel clock frequency: 1305600 kHz

V2: - s/i915_display_clock_info/i915_cdclk_info/ (Jani)
- Move the logic to intel_cdclk.c (Jani)
- Don't remove info from i915_frequency_info (Jani)
V3: - Drop locking (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413114502.1105288-1-bhanuprakash.modem@intel.com

drm/i915/psr: split out PSR regs to a separate file

Clean up i915_reg.h by splitting out PSR regs to
display/intel_psr_regs.h.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-2-jani.nikula@intel.com

drm/i915/display/intel_display_debugfs: Fix incorrect param naming for 'intel_connector'

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add'
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org

drm/i915/dsc: Add debugfs entry to validate DSC output formats

DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
Also, new debugfs entry is created to enforce output format. This is
required because of our driver policy. For ex. if a mode is supported
in both RGB and YCbCr420 output formats by the sink, our policy is to
try RGB first and fall back to YCbCr420, if mode cannot be shown
using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
we need a debugfs entry (force_dsc_output_format) to force this
output format.

v2: -Func name changed to intel_output_format_name() (Jani N)
-Return forced o/p format from intel_dp_output_format() (Jani N)
v3: -output_format_str[] to remain static (Jani N)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com

drm/i915/ips: Make IPS debugfs per-crtc

IPS is a per-pipe feature, so let's move the debugfs stuff
under the crtc directory, and only register it when IPS
is actually available.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327133942.22063-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/debugfs: add crtc i915_pipe debugfs file

The pipe may differ from crtc index if pipes are fused off. For testing
purposes, IGT needs to know the pipe.

There's already a I915_GET_PIPE_FROM_CRTC_ID IOCTL for this. However,
the upcoming Xe driver won't have that IOCTL, and going forward, we'll
want a unified interface for testing i915 and Xe, as they share the
display code. Thus add the debugfs for i915 display.

v2: User letters for pipe names (Ville)

Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-2-jani.nikula@intel.com

drm/i915/debugfs: switch crtc debugfs to struct intel_crtc

Convert the crtc debugfs code to use struct intel_crtc instead of struct
drm_crtc.

v2: Fix build for CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y (kernel test robot)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-1-jani.nikula@intel.com

drm/i915/psr: move PSR debugfs to intel_psr.c

Move the debugfs next to the implementation.

Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-1-jani.nikula@intel.com

drm/i915/debugfs: move IPS debugfs to hsw_ips.c

Follow the style of placing debugfs next to the implementation.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302161617.2978821-1-jani.nikula@intel.com

drm/i915: remove unnecessary intel_pm.h includes

As intel_pm.[ch] used to contain much more, intel_pm.h was included in a
lot of places. Many of them are now unnecessary. Remove.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ab9a7147b0cd63d95b9f27ed40615b9c9be18f84.1677678803.git.jani.nikula@intel.com

drm/i915/wm: move watermark debugfs to intel_wm.c

Follow the new convention of placing debugfs with the code.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215141910.433043-3-jani.nikula@intel.com

drm/i915/wm: move remaining watermark code out of intel_pm.c

Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold
generic and pre-SKL watermark code, respectively. SKL+ watermark code
has already been split out to skl_watermark.[ch].

Use the _wm.[ch] naming for brevity; we may want to rename
skl_watermark.[ch] later accordingly.

Add new intel_wm_init() to call either skl_wm_init() or
i9xx_wm_init(i915) depending on the platform, the latter comprising of
the remains of intel_init_pm().

Sprinkle in some minor checkpatch fixes while moving the code.

v2:
- Rebase
- Fix copyright year

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddf04a07a37f0368b3fef85d4ebb924082fec6cd.1676317696.git.jani.nikula@intel.com

drm/i915: Replace wm.max_levels with wm.num_levels and use it everywhere

Replaces wm.max_level with wm.num_levels, since that generally
results in nicer looking code (for-loops can be in standard
form etc.).

Also get rid of the two different wrappers we have for this
(ilk_wm_max_level() and intel_wm_num_levels()). They don't
really do anything for us other than potentially slow things
down if the compiler actually emits the function calls every
time (num_planes*num_wm_levels*higher_level_wm_function_calls
could be a big number). The watermark code already shows up
far too prominently in cpu profiles. Though I must admit that
I didn't look at the generated code this time.

v2: Fix the ilk_wm_merge() off-by-one (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com

drm/i915: Populate wm.max_level for everyone

Switch ilk+ and skl+ platforms to also setting up
wm.max_level and remove a bunch of if ladders as a result.

There will be a tiny change in the debugfs on CHV machines
that have DVFS disabled in the BIOS. Presviously debugfs
would show the latency for the DVFS level as well, but
that will no longer be the case. Which is arguably better
as that number is absolutely meaningless when DVFS can't
be enabled anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com

drm/i915: Expose SAGV state via debugfs

Since SAGV is controlled via unidirectional pcode commands
we have no way to query the current state. So instead let's
expose the last programmed state via debugfs. This way we
can at least know whether SAGV should be enabled or not
(which can be important to know when dealing with underruns/etc.).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: stop including i915_irq.h from i915_trace.h

Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.

Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.

Also some places actually needed i915_irq.h too.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com

drm/i915/display: remove drm_device aliases

drm_device pointers are unwelcome.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006204844.2831303-1-andrzej.hajda@intel.com

drm/i915: Make DRRS debugfs per-crtc/connector

Since I already broke anything that relied on the old contents
of the DRRS debugfs files might as well finish the breakage
and convert the files to be per-crtc/connector so we don't need
to have annoying code in igt to parse these.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003113249.16213-4-ville.syrjala@linux.intel.com

drm/i915: Move DRRS debugfs next to the implementation

Move the DRRS debugfs stuff next to the actual implementation
so that it's easier to deal with the whole.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003113249.16213-2-ville.syrjala@linux.intel.com

drm/i915/hotplug: move hotplug storm debugfs to intel_hotplug.c

The debugfs should be where the implementation details are.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916130634.3781122-1-jani.nikula@intel.com

drm/i915/dsc: convert dsc debugfs entry from output_bpp to input_bpc

Convert dsc debugfs entry from output_bpp to input_bpc. The rationale
is to validate different input bpc across various platforms.

v2: -improved commit message (Jani N)
-styling fixes (Jani N)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902190658.9459-2-swati2.sharma@intel.com

drm/i915/ipc: move IPC debugfs to skl_watermark.c

Follow the new direction for debugfs files, moving the details where the
implementation is. It seems quite natural skl_watermark.c is the place
that controls IPC details, even for debugfs, not
intel_display_debugfs.c.

Rename the functions and convert dev_priv->i915 while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d59b18f5dc06e86a48c1ce0f40d625f51e3e85a.1662983005.git.jani.nikula@intel.com

drm/i915/ipc: refactor and rename IPC functions

Rename the IPC functions to have skl_watermark_ipc_ prefix, rename
enable to update to reflect what the function actually does, and add
enabled function to abstract direct ->ipc_enabled access for state
query.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/536237d5bc919e8c97a96796f235f5bb264ceff2.1662983005.git.jani.nikula@intel.com

drm/i915: Extract skl_watermark.c

Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.

Also sneak in the s/dev_priv/i915/ rename while at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: move fb_tracking under display sub-struct

Move display frontbuffer tracking related members under drm_i915_private
display sub-struct.

Rename struct i915_frontbuffer_tracking to intel_frontbuffer_tracking
while at it.

FIXME: fb_tracking.lock mutex init should be moved away from
i915_gem_init_early().

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5444d0a373afca46da9a2f6e4db442af21b429b.1661779055.git.jani.nikula@intel.com

drm/i915: move opregion to display.opregion

Move display opregion related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0ceb5148835fa3e0828786ae491fcd11e2e77ff.1661779055.git.jani.nikula@intel.com

drm/i915: move hotplug to display.hotplug

Move display hotplug related members under drm_i915_private display
sub-struct.

Rename struct i915_hotplug to intel_hotplug while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c1c7562a31c115e9d6a131861e4ca9c97d4f7e09.1661346845.git.jani.nikula@intel.com

drm/i915: move wm to display.wm

Move display watermark related members under drm_i915_private display
sub-struct.

It's a bit arbitrary when to define a named struct for grouping, but
clearly intel_wm is big enough to warrant a separate definition.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b991dd25f8f539746c475d417691e0816ff6b24a.1661346845.git.jani.nikula@intel.com

drm/i915: move and group fbdev under display.fbdev

Move display fbdev related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7eb563bc88623bd3f12b9a00efec85e6a78d5800.1661346845.git.jani.nikula@intel.com

drm/i915: move dpll under display.dpll

Move display dpll related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8818a2a4330edb9800f567626958b2de8872aa63.1661346845.git.jani.nikula@intel.com

drm/i915/display: Add debug print for scaler filter

Add debug print statement to print scaler filter property
value. Since property can be set as either default or integer
scaler; its good if we can get debug print for the same in dmesg
log.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706102240.21414-1-swati2.sharma@intel.com

drm/i915/display/debug: Expose crtc current bpc via debugfs

This new debugfs will expose the currently using bpc by crtc.
It is very useful for verifying whether we enter the correct
output color depth from IGT.

This patch will also add the connector's max supported bpc to
"i915_display_info" debugfs.

Example:
cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
Current: 8

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519095149.3560034-3-bhanuprakash.modem@intel.com

drm/i915/dmc: move dmc debugfs to intel_dmc.c

Continue localizing DMC register and data access to intel_dmc.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b7bc0fc117b030d59dd74891af104c165bf9b39.1647870374.git.jani.nikula@intel.com

drm/i915: s/enable/active/ for DRRS

Rename the DRRS functiosn to say "(de)activate" rather than
"enable/disable". This let's us differentiate between the
logically enabled vs. actually currently active cases.

v2: Fix kernel doc for intel_drrs_deactivate()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Tweak plane ddb allocation tracking

Let's store the plane allocation in a manner which more closely
matches how the hw operates. That is, we store the packed/CbCr
ddb in one struct, and the Y ddb in another. Currently we're
storing packed/Y in one struct, CbCr in the other.

This also works pretty well for icl+ where the UV plane is
the main plane and the Y plane is subservient to it. Although
in this case we do not even use ddb_y as we do the ddb allocation
in terms of hw planes.

v2: Rebase

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303191207.27931-2-ville.syrjala@linux.intel.com

drm/i915: Add missing tab to DRRS debugfs

The DRRS refresh rate should be indented by one tab like the
other per-crtc DRRS stuff.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Convert fixed_mode/downclock_mode into a list

Store the fixed_mode and downclock_mode as a real list,
in preparation for exposing other supported modes as well.

v2: Init the list in intel_sdvo_connector_alloc() too
v3: Use list_first_entry_or_null() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314152737.9125-1-ville.syrjala@linux.intel.com

drm/i915: Enable eDP DRRS on ilk/snb port A

Nothing special about ivb+ here, if DRRS works on ivb+ port A
it should work just as well on ilk/snb. So let's enable
that.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-15-ville.syrjala@linux.intel.com

drm/i915: Stash DRRS state under intel_crtc

Ger rid of one more ugly crtc->config usage by storing the DRRS
state under intel_crtc. intel_drrs_enable() copies what it needs
from the crtc state, after which DRRS can be blissfully ignorant
of anything going on around it.

This also lets multiple pipes do DRRS simultanously and entirely
independently.

v2: Split out some stuff (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Eliminate the intel_dp dependency from DRRS

The DRRS code has no use for the intel_dp, replace it with
just a crtc pointer. This is just an intermediate step towards
making DRRS truly per-crtc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Introduce intel_drrs_type_str()

Add helper to get the drrs type as a string, and use it
in a couple of places. Also pimp the debugfs output a bit
while at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Nuke dev_priv->drrs.type

When we found a downclock mode dev_priv->drrs.type is just a
straight copy of dev_priv->vbt.drrs_type. And in case we
couldn't find a downclock mode can_enable_drrs() won't let
us enable DRRS anyway so the minor distinction between the
two is irrelevant. So let's just nuke dev_priv->drrs.type
and consult the VBT version directly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Simplify intel_panel_info()

No need for all this connector type special casing. If the
connector has a fixed mode just print it, otherwise don't.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Clean up DRRS refresh rate enum

Make the DRRS refresh rate enum less magical.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220310004802.16310-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Polish drrs type enum

Make the drrs type enum less convoluted.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220310004802.16310-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Eliminate bigjoiner boolean

Since we now have the bigjoiner_pipes bitmask the boolean
is redundant. Get rid of it.

Also, populating bigjoiner_pipes already during
encoder->compute_config() allows us to use it much earlier
during the state calculation as well. The initial aim is
to use it in intel_crtc_compute_config().

v2: Move the hweight(bigjoiner_pipes) stuff to a later patch

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> #v1
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-12-ville.syrjala@linux.intel.com

drm/i915: Start tracking PIPESRC as a drm_rect

Instead of just having the pipe_src_{w,h} let's use a full
drm_rect for it. This will be particularly useful to astract
away some bigjoiner details.

v2: No hweight() stuff yet

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Use str_enabled_disabled()

Remove the local enableddisabled() implementation and adopt the
str_enabled_disabled() from linux/string_helpers.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-3-lucas.demarchi@intel.com

drm/i915: Use str_yes_no()

Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com

drm/i915: Move intel_display_power_well_is_enabled() to intel_display_power_well.c

Move intel_display_power_well_is_enabled() to intel_power_well.c, as a step
towards making the low-level power well internals (i915_power_well_ops/desc
structs) hidden.

Eventually the call to this function and in general accessing power
wells directly from elsewhere in the driver should be replaced by the
use of power domains.

No functional change.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-9-imre.deak@intel.com

drm/i915: Dump hw.enable and pipe_mode

Include hw.enable and pipe_mode in the crtc debugfs state dump.
These are fairly fundemental to the operation of the driver
so not seeing them leaves us in the dark.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Dump the crtc hw state always

Let's just dump the "full" hw crtc state in debugs so that we can
see if some stale junk was left behind when the crtc is supposed
to be entirely off.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915/display/tgl+: Implement new PLL programming step

A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.

The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.

v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)

BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com

drm/i915: Polish ilk+ wm register bits

Use REG_GENMASK() & co. for ilk+ watermark registers.

v2: Stick to the current bitmask sizes (Jani)
Fix "watermarm" typo (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-4-ville.syrjala@linux.intel.com

drm/i915/fbdev: add intel_fbdev_framebuffer() helper

Wrap accessing struct intel_fbdev guts in a helper.

v2: s/intel_fbdev_to_framebuffer/intel_fbdev_framebuffer/g (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215122957.2755529-1-jani.nikula@intel.com

drm/i915: Change bigjoiner state tracking to use the pipe bitmask

Get rid of the inflexible bigjoiner_linked_crtc pointer thing
and just track things as a bitmask of pipes instead. We can
also nuke the bigjoiner_slave boolean as the role of the pipe
can be determined from its position in the bitmask.

It might be possible to nuke the bigjoiner boolean as well
if we make encoder.compute_config() do the bitmask assignment
directly for the master pipe. But for now I left that alone so
that encoer.compute_config() will just flag the state as needing
bigjoiner, and the intel_atomic_check_bigjoiner() is still
responsible for determining the bitmask. But that may have to change
as the encoder may be in the best position to determine how
exactly we should populate the bitmask.

Most places that just looked at the single bigjoiner_linked_crtc
now iterate over the whole bitmask, eliminating the singular
slave pipe assumption.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-11-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Introduce intel_crtc_is_bigjoiner_{slave,master}()

Introduce helpers to query whether the crtc is the slave/master
for bigjoiner. This decouples most places from the exact
state layout we use to track this relationship, allowing us
to change and extend it more easily.

Performed with cocci:
@@
expression S, E;
@@
(
S->bigjoiner_slave = E;
|
- S->bigjoiner_slave
+ intel_crtc_is_bigjoiner_slave(S)
)

@@
expression S, E;
@@
(
- E && S->bigjoiner && !intel_crtc_is_bigjoiner_slave(S)
+ E && intel_crtc_is_bigjoiner_master(S)
|
- S->bigjoiner && !intel_crtc_is_bigjoiner_slave(S)
+ intel_crtc_is_bigjoiner_master(S)
)

@@
expression S;
@@
- (intel_crtc_is_bigjoiner_master(S))
+ intel_crtc_is_bigjoiner_master(S)

@@
expression S, E1, E2, E3;
@@
- intel_crtc_is_bigjoiner_slave(S) ? E1 : S->bigjoiner ? E2 : E3
+ intel_crtc_is_bigjoiner_slave(S) ? E1 : intel_crtc_is_bigjoiner_master(S) ? E2 : E3

@@
typedef bool;
@@
+ bool intel_crtc_is_bigjoiner_slave(const struct intel_crtc_state *crtc_state)
+ {
+ return crtc_state->bigjoiner_slave;
+ }
+
intel_master_crtc(...) {...}

@@
typedef bool;
@@
+ bool intel_crtc_is_bigjoiner_master(const struct intel_crtc_state *crtc_state)
+ {
+ return crtc_state->bigjoiner && !crtc_state->bigjoiner_slave;
+ }
+
intel_master_crtc(...) {...}

@@
typedef bool;
identifier S;
@@
- bool is_trans_port_sync_mode(const struct intel_crtc_state *S);
+ bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
+ bool intel_crtc_is_bigjoiner_slave(const struct intel_crtc_state *crtc_state);
+ bool intel_crtc_is_bigjoiner_master(const struct intel_crtc_state *crtc_state);

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203183823.22890-7-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

drm/i915/dg1: Update DMC_DEBUG3 register

Current DMC_DEBUG3(_MMIO(0x101090)) address is for TGL,
it is wrong for DG1. Just like commit 5bcc95ca382e
("drm/i915/dg1: Update DMC_DEBUG register"), correct
this issue for DG1 platform to avoid wrong register
being read.

BSpec: 49788

v2: fix "not wrong" typo. (Jani)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211002933.84240-1-chuansheng.liu@intel.com

drm/i915/fbc: Register per-crtc debugfs files

Expose FBC debugfs files for each crtc. These may or may not point
to the same FBC instance depending on the platform.

We leave the old global debugfs files in place until
igt catches up to the new per-crtc approach.

v2: Take a trip via intel_crtc_debugfs_add() (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213151435.9700-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Move FBC debugfs stuff into intel_fbc.c

In order to encapsulate FBC harder let's just move the debugfs
stuff into intel_fbc.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-12-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Pass i915 instead of FBC instance to FBC underrun stuff

The underrun code doesn't need to know any details about FBC, so
just pass in the whole device rather than a specific FBC instance.
We could make this a bit more fine grained by also passing in the
pipe to intel_fbc_handle_fifo_underrun_irq() and letting the FBC
code figure which FBC instance (if any) is active on said pipe.
But that seems a bit overkill for this so don't bother.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-11-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/debugfs: move debug printing to intel_display_power.c

The debugfs should have no special privileges to look into the
implementation guts. Move the actual debug printing of power domains to
intel_display_power.c.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-3-jani.nikula@intel.com

drm/i915/fbc: Start passing around intel_fbc

In preparation for multiple FBC instances start passing around
intel_fbc pointers rather than i915 pointers. And once there are
multiple of these we can't rely on container_of() to get back to
the i915, so we toss in a fbc->i915 pointer already.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104144520.22605-17-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Introduce intel_fbc_set_false_color()

Pull the direct FBC register frobbing out from the debugfs code
into the fbc code. Also add a vfunc for this so we don't need
extra platforms checks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104144520.22605-11-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Introduce intel_fbc_is_compressing()

Move the direct FBC status register reads from the debugfs code
behind an abstract api.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104144520.22605-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/display: Wait PSR2 get out of deep sleep to update pipe

Alderlake-P was getting 'max time under evasion' messages when PSR2
is enabled, this is due PIPE_SCANLINE/PIPEDSL returning 0 over a
period of time longer than VBLANK_EVASION_TIME_US.

For PSR1 we had the same issue so intel_psr_wait_for_idle() was
implemented to wait for PSR1 to get into idle state but nothing was
done for PSR2.

For PSR2 we can't only wait for idle state as PSR2 tends to keep
into sleep state(ready to send selective updates).
Waiting for any state below deep sleep proved to be effective in
avoiding the evasion messages and also not wasted a lot of time.

v2:
- dropping the additional wait_for loops, only the _wait_for_atomic()
is necessary
- waiting for states below EDP_PSR2_STATUS_STATE_DEEP_SLEEP

v3:
- dropping intel_wait_for_condition_atomic() function

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005231851.67698-1-jose.souza@intel.com

drm/i915: split out vlv sideband to a separate file

The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].

Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com

drm/i915/mst: abstract intel_dp_mst_source_support()

Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com

Revert "drm/i915: cleanup: drm_modeset_lock_all() --> DRM_MODESET_LOCK_ALL_BEGIN()"

This reverts commit 746826bcf8fdf682668ff1c415d6b91dbf5858be.

This patchset breaks on intel platforms and was previously NACK'd by
Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fernando Ramos <greenfoo@u92.eu>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211002154542.15800-5-sean@poorly.run

drm/i915: cleanup: drm_modeset_lock_all() --> DRM_MODESET_LOCK_ALL_BEGIN()

As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()

Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-13-greenfoo@u92.eu

drm/i915/debugfs: pass intel_connector to intel_connector_debugfs_add()

Prefer the intel_ types. No functional changes.

v2: Fix build.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830140222.12228-1-jani.nikula@intel.com

drm/i915/display: stop returning errors from debugfs registration

Failures to register debugfs should be ignored anyway, so stop
propagating errors altogether for clarity and simplicity. No functional
changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/346562ccef2282ccdbdea54409fab1d2b48f313c.1630327990.git.jani.nikula@intel.com

drm/i915/debugfs: register LPSP capability on all platforms

The debugfs file shows it's not capable, don't duplicate the info.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/939453050a5a5175a12a08f16542c1b40bd726dc.1630327990.git.jani.nikula@intel.com

drm/i915/debugfs: clean up LPSP capable

Clean up the LPSP capability printout. No functional changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/097390f12da8de57c9d52ad675309d0422dec8fb.1630327990.git.jani.nikula@intel.com

drm/i915/debugfs: clean up LPSP status

Clean up the LPSP status printout. No functional changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7c2db4e1434ed9a3545f2561a03dc593db5e674.1630327990.git.jani.nikula@intel.com

drm/i915/display: Renaming DRRS functions to intel_drrs_*()

We had a mix of intel_edp_drrs_*(), intel_dp_drrs_*() and
intel_dp_set_drrs_state(), so properly renaming all functions to
keep the same pattern.

While at it, also dropping intel_dp_set_drrs_state from the
documentation as it is a static function.

v3:
- dropping documentation style comment in static function
(intel_drrs_set_state)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-3-jose.souza@intel.com

drm/i915/display: Move DRRS code its own file

intel_dp.c is a 5k lines monster, so moving DRRS out of it to reduce
some lines from it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-2-jose.souza@intel.com

drm/i915/display: remove explicit CNL handling from intel_display_debugfs.c

Only one reference to CNL that is not needed, but code is the same for
DISPLAY_VER >= 11, so leave the code around and just remove the special
case for CNL.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-8-lucas.demarchi@intel.com

drm/i915/display/dsc: Add Per connector debugfs node for DSC BPP enable

This patch creates a per connector debugfs node to expose
the Compressed BPP. The same node can be used from userspace
to force DSC to a certain BPP(all accepted values).

This is useful to verify all supported/requested
compression bpp's through IGT

v2: Remove unnecessary logic (Jani)
v3: Drop pipe bpp in debugfs node (Vandita)
v4: Minor cleanups (Vandita)
v5: Fix NULL pointer dereference
v6: Fix dim tool checkpatch errors
Release the lock before return (Vandita)
v7: Rename to file to dsc_bpp, remove unwanted
dsc bpp range check from v6, permissions (Jani)

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Navare Manasi D <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720064907.9771-3-vandita.kulkarni@intel.com

drm/i915/display: Add write permissions for fec support

Though there is a write option available on fec_suport
debugfs file, so far it has been registering with read
permissions only.

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720064907.9771-2-vandita.kulkarni@intel.com

drm/i915/debugfs: DISPLAY_VER 13 lpsp capability

Extend i915_lpsp_capability debugfs to DG2,ADLP and future platforms.

v2: commit log modification.

Cc: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713075738.23759-1-anshuman.gupta@intel.com

drm/i915: finish INTEL_GEN and friends conversion

Commit 161058fb899e ("drm/i915: Add remaining conversions to GRAPHICS_VER")
did the last conversions to the new macros for version checks, but left
one instance behind and some other changes sneaked in to use INTEL_GEN.
Remove the last users so we can remove the macros.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-3-lucas.demarchi@intel.com

drm/i915: s/intel_crtc/crtc/

Clear out the straggler 'intel_crtc' variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/adl_p: Pipe B DMC Support

ADLP requires us to load both Pipe A and Pipe B.
Plug Pipe B loading support.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-4-anusha.srivatsa@intel.com

drm/i915/xelpd: Pipe A DMC plugging

This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.

Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.

v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.

v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.

v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)

Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com

drm/i915/dmc: Add intel_dmc_has_payload() helper

We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com

drm/i915/dmc: s/intel_csr.c/intel_dmc.c and s/intel_csr.h/intel_dmc.h

Finally, rename the header and source file from csr to dmc.

v2: Add file rename in Documentation.
- Place headers in orders. (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-6-anusha.srivatsa@intel.com

drm/i915/dmc: Rename macro names containing csr

Rename all occurences of CSR_* with DMC_*

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-4-anusha.srivatsa@intel.com

drm/i915/dmc: s/HAS_CSR/HAS_DMC

No functional change.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-3-anusha.srivatsa@intel.com

drm/i915/dmc: s/intel_csr/intel_dmc

No functional change.

v2: Chchpatch fixes.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-2-anusha.srivatsa@intel.com

drm/i915/xelpd: Add XE_LPD power wells

Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D. These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):

PG0
|
--PG1--
/ \
PGA --PG2--
/ | \
PGB PGC PGD

PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.

PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).

v2:
- Squash in LPSP status patch from Uma since it's also a
powerwell-specific change.

Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-4-matthew.d.roper@intel.com

drm/i915: Don't include intel_de.h from intel_display_types.h

Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.

This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)

@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)

@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"

@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"

Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com

drm/i915/display: Eliminate IS_GEN9_{BC,LP}

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
- Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/display: Eliminate IS_GEN9_{BC,LP}

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
- Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com

drm/i915/display: Simplify GLK display version tests

GLK has always been a bit of a special case since it reports INTEL_GEN()
as 9, but has version 10 display IP. Now we can properly represent the
display version as 10 and simplify the display generation tests
throughout the display code.

Aside from manually adding the version to the glk_info structure, the
rest of this patch is generated with a Coccinelle semantic patch. Note
that we also need to switch any code that matches gen10 today but *not*
GLK to be CNL-specific:

@@ expression dev_priv; @@
- DISPLAY_VER(dev_priv) > 9
+ DISPLAY_VER(dev_priv) >= 10

@@ expression dev_priv, E; @@
(
- DISPLAY_VER(dev_priv) >= 10 && E
+ (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && E
|
- DISPLAY_VER(dev_priv) >= 10
+ DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)
|
- IS_DISPLAY_RANGE(dev_priv, 10, E)
+ IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_CANNONLAKE(dev_priv)
)

@@ expression dev_priv, E, E2; @@
(
- (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- E || IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)
+ E || IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- IS_GEMINILAKE(dev_priv) || E || IS_CANNONLAKE(dev_priv)
+ E || IS_DISPLAY_VER(dev_priv, 10)
|
- E || IS_GEMINILAKE(dev_priv) || E2 || IS_CANNONLAKE(dev_priv)
+ E || E2 || IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_DISPLAY_VER(dev_priv, 10) || IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 10)
|
- (IS_GEMINILAKE(dev_priv) || IS_DISPLAY_VER(dev_priv, 10))
+ IS_DISPLAY_VER(dev_priv, 10)
)

@@ expression dev_priv; @@
- (IS_DISPLAY_VER(dev_priv, 9) && !IS_GEMINILAKE(dev_priv))
+ IS_DISPLAY_VER(dev_priv, 9)

@@ expression dev_priv; @@
(
- !(DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10))
+ DISPLAY_VER(dev_priv) < 10
|
- (DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10))
+ DISPLAY_VER(dev_priv) >= 10
)

@@ expression dev_priv, E; @@
- E || DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)
+ E || DISPLAY_VER(dev_priv) >= 10

@@ expression dev_priv, E; @@
- (IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_DISPLAY_VER(dev_priv, 10))
+ IS_DISPLAY_RANGE(dev_priv, 10, E)

@@ expression dev_priv; @@
(
- DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) || IS_GEN9_LP(dev_priv)
+ DISPLAY_VER(dev_priv) >= 10 || IS_GEN9_LP(dev_priv)
|
- IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)
+ IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 10
)

@@ expression dev_priv, E; @@
- !(DISPLAY_VER(dev_priv) >= E)
+ DISPLAY_VER(dev_priv) < E

v2:
- Convert gen10 conditions that don't include GLK into CNL conditions.
(Ville)

v3:
- Rework coccinelle rules so that "ver>=10" turns into "ver>=11||is_cnl." (Ville)

v3.1:
- Manually re-add the ".display.version = 10" to glk_info after
regenerating patch via Coccinelle.

v4:
- Also apply cocci rules to intel_pm.c and i915_irq.c! (CI)

Cc: Ville Syrjälä <ville.syrjala@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322233840.4056851-1-matthew.d.roper@intel.com

drm/i915/display: Eliminate most usage of INTEL_GEN()

Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:

@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)

@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)

@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)

@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)

There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.

v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com

drm/i915: Use pipes instead crtc indices in PLL state tracking

All the other places we have use pipes instead of crtc indices
when tracking resource usage. Life is easier when we do it
the same way always, so switch the dpll mgr to using pipes as
well. Looks like it was actually mixing these up in some cases
so it would not even have worked correctly except when the
device has a contiguous set of pipes starting from pipe A.
Granted, that is the typical case but supposedly it may not
always hold on modern hw.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/display: Rename for_each_intel_encoder.*_can_psr to for_each_intel_encoder.*_with_psr

for_each_intel_encoder.*_"can_psr" sounds strange, in my opinion
"with_psr" is better.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-1-jose.souza@intel.com

drm: Switch to %p4cc format modifier

Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com

drm/i915/debugfs: HDCP capability enc NULL check

DP-MST connector encoder initializes at modeset
Adding a connector->encoder NULL check in order to
avoid any NULL pointer dereference.
intel_hdcp_enable() already handle this but debugfs
can also invoke the intel_{hdcp,hdcp2_capable}.
Handling it gracefully.

v2:
- Use necessary lock and NULL check in
i915_hdcp_sink_capability_show. [Imre]

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211140502.22786-1-anshuman.gupta@intel.com

drm/i915/display: Support Multiple Transcoders' PSR status on debugfs

In order to support the PSR state of each transcoder, it adds
i915_psr_status to sub-directory of each transcoder.

v2: Change using of Symbolic permissions 'S_IRUGO' to using of octal
permissions '0444'
v5: Addressed JJani Nikula's review comments
- Remove checking of Gen12 for i915_psr_status.
- Add check of HAS_PSR()
- Remove meaningless check routine.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-2-gwan-gyeong.mun@intel.com

drm/i915/display: Support PSR Multiple Instances

It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.

v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
- Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
- Remove wrong comments and add comments for a limit of supporting of
a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
PSR on BDW+
v8: Address Anshuman's review comments
- Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
- Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
- In order to reduce changes keep the old name for drm_i915_private.
- Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
- Change the calling of intel_psr2_program_trans_man_trk_ctl() into
commit_pipe_config().
- Change a checking order of CAN_PSR() and connector_status to original
on i915_psr_sink_status_show().
- Drop unneeded intel_dp_update_pipe() function.
- In order to wait a specific encoder which belong to crtc_state on
intel_psr_wait_for_idle(), add checking of encoder.
- Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
- Add and use for_each_intel_psr_enabled_encoder() macro.
- In order to use correct frontbuffer_bit for each pipe,
fix intel_psr_invalidate() and intel_psr_flush().
- Remove redundant or unneeded codes.
- Update comments.
v14: Address Jose's review comment
- Add and use for_each_intel_encoder_can_psr() macro and
for_each_intel_encoder_mask_can_psr() macro.
- Add source_support member variable into intel_psr structure.
- Update CAN_PSR() macro that checks source_support.
- Move encoder's PSR availity check to psr_init() from
psr_compute_config().
- Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
intel_psr2_program_trans_man_trk_ctl()

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com

drm/i915: Encapsulate dbuf state handling harder

In order to make the dbuf state computation less fragile
let's make it stand on its own feet by not requiring someone
to peek into a crystall ball ahead of time to figure out
which pipes need to be added to the state under which potential
future conditions. Instead we compute each piece of the state
as we go along, and if any fallout occurs that affects more than
the current set of pipes we add the affected pipes to the state
naturally.

That requires that we track a few extra thigns in the global
dbuf state: dbuf slices for each pipe, and the weight each
pipe has when distributing the same set of slice(s) between
multiple pipes. Easy enough.

We do need to follow a somewhat careful sequence of computations
though as there are several steps involved in cooking up the dbuf
state. Thoguh we could avoid some of that by computing more things
on demand instead of relying on earlier step of the algorithm to
have filled it out. I think the end result is still reasonable
as the entire sequence is pretty much consolidated into a single
function instead of being spread around all over.

The rough sequence is this:
1. calculate active_pipes
2. calculate dbuf slices for every pipe
3. calculate total enabled slices
4. calculate new dbuf weights for any crtc in the state
5. calculate new ddb entry for every pipe based on the sets of
slices and weights, and add any affected crtc to the state
6. calculate new plane ddb entries for all crtcs in the state,
and add any affected plane to the state so that we'll perform
the requisite hw reprogramming

And as a nice bonus we get to throw dev_priv->wm.distrust_bios_wm
out the window.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-8-ville.syrjala@linux.intel.com

drm/i915/dp: abstract struct intel_dp pps members to a sub-struct

Add some namespacing to highlight what belongs where. No functional
changes.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120101834.19813-3-jani.nikula@intel.com

drm/i915/display: Record the plane update times for debugging

Since we try and estimate how long we require to update the registers to
perform a plane update, it is of vital importance that we measure the
distribution of plane updates to better guide our estimate. If we
underestimate how long it takes to perform the plane update, we may
slip into the next scanout frame causing a tear. If we overestimate, we
may unnecessarily delay the update to the next frame, causing visible
jitter.

Replace the warning that we exceed some arbitrary threshold for the
vblank update with a histogram for debugfs.

v2: Add a per-crtc debugfs entry so that the information is easier to
extract when testing individual CRTC, and so that it can be reset before
a test.

v3: Flip the graph on its side; creates space to label the time axis.

Updates: 4684
|
1us |
|
4us |********
|**********
16us |***********
|*****
66us |
|
262us |
|
1ms |
|
4ms |
|
17ms |
|
Min update: 5918ns
Max update: 54781ns
Average update: 16628ns
Overruns > 250us: 0

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1982
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20201202212814.26320-1-chris@chris-wilson.co.uk

drm/i915: Add debugfs dumping for bigjoiner, v3.

Dump debugfs and planar links as well, this will make it easier to debug
when things go wrong.

v4:
* Rebase
Changes since v1:
- Report planar slaves as such, now that we have the plane_state switch.
Changes since v2:
- Rebase on top of the new plane format dumping

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-12-manasi.d.navare@intel.com

drm/i915: Include fb modifier in state dumps

To help diagnose modifier related issues let's include that
information in the various state dumps.

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103153026.16566-1-ville.syrjala@linux.intel.com
Acked-by: Simon Ser <contact@emersion.fr>

drm/i915/dg1: Update DMC_DEBUG register

Update the DMC_DEBUG_DC5 register to its new location and do not try
reading the DC6 counter since DG1 doesn't support DC6.

v2: Use IS_DGFX() instead of IS_DG1(). Even if not having DC6 is not
directly related to DGFX, the register move to a new location is. So in
future, if there is one supporting DC6, it would just need to add the
other register rather than fixing the case of a wrong register being
read (Matt)

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-10-lucas.demarchi@intel.com

drm/dp: Pimp drm_dp_downstream_max_bpc()

Deal with more cases in drm_dp_downstream_max_bpc():
- DPCD 1.0 -> assume 8bpc for non-DP
- DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything
- DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap
- anything else -> assume 8bpc

v2: Use Returns: for kdoc (Lyude)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Print HDCP version info for all connectors

De-duplicate the HDCP version code for each connector and print it for
all connectors.

Cc: Juston Li <juston.li@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Juston Li <juston.li@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Link: https://patchwork.freedesktop.org/patch/msgid/20200227185714.171466-1-sean@poorly.run #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-16-sean@poorly.run #v5
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-16-sean@poorly.run #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-17-sean@poorly.run #v7

Changes in v4:
- Added to the set
Changes in v5:
-Print "No connector support" for hdcp sink capability as well (Ram)
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-17-sean@poorly.run

drm/i915/display: Fix DRRS debugfs

Supported and enabled are different things so printing both.

v3: using drrs->type instead of vbt.drrs_type

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Srinivas K <srinivasx.k@intel.com>
Cc: Hariom Pandey <hariom.pandey@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-3-jose.souza@intel.com

drm/i915/display: Check for an LPSP encoder before dereferencing

Avoid a GPF at

<1>[ 20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c
<1>[ 20.177322] #PF: supervisor read access in kernel mode
<1>[ 20.177323] #PF: error_code(0x0000) - not-present page
<6>[ 20.177324] PGD 0 P4D 0
<4>[ 20.177327] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[ 20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1
<4>[ 20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4>[ 20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915]
<4>[ 20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74
<4>[ 20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246
<4>[ 20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000
<4>[ 20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30
<4>[ 20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
<4>[ 20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08
<4>[ 20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30
<4>[ 20.177383] FS: 00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000
<4>[ 20.177384] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0
<4>[ 20.177386] Call Trace:
<4>[ 20.177390] seq_read+0xcb/0x420

which is presumably from having no encoder attached at that time.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175
Fixes: 8806211fe7b3 ("drm/i915: Add i915_lpsp_capability debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729130912.30093-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a22b1a9bb0d72a58d5b836653f28d97ee8fea1c4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Initial implementation of PSR2 selective fetch

All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).

This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.

But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.

Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.

v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)

BSpec: 55229
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: Check for an LPSP encoder before dereferencing

Avoid a GPF at

<1>[ 20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c
<1>[ 20.177322] #PF: supervisor read access in kernel mode
<1>[ 20.177323] #PF: error_code(0x0000) - not-present page
<6>[ 20.177324] PGD 0 P4D 0
<4>[ 20.177327] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[ 20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1
<4>[ 20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4>[ 20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915]
<4>[ 20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74
<4>[ 20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246
<4>[ 20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000
<4>[ 20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30
<4>[ 20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
<4>[ 20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08
<4>[ 20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30
<4>[ 20.177383] FS: 00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000
<4>[ 20.177384] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0
<4>[ 20.177386] Call Trace:
<4>[ 20.177390] seq_read+0xcb/0x420

which is presumably from having no encoder attached at that time.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175
Fixes: 8806211fe7b3 ("drm/i915: Add i915_lpsp_capability debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729130912.30093-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/display: prefer dig_port to reference intel_digital_port

We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around

5 intel_dport
36 dport
479 intel_dig_port
352 dig_port

Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.

v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com

drm/i915/params: switch to device specific parameters

Start using device specific parameters instead of module parameters for
most things. The module parameters become the immutable initial values
for i915 parameters. The device specific parameters in i915->params
start life as a copy of i915_modparams. Any later changes are only
reflected in the debugfs.

The stragglers are:

* i915.force_probe and i915.modeset. Needed before dev_priv is
available. This is fine because the parameters are read-only and never
modified.

* i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and
I915_STATE_WARN_ON would result in massive and ugly churn. This is
handled by not exposing the parameter via debugfs, and leaving the
parameter writable in sysfs. This may be fixed up in follow-up work.

* i915.inject_probe_failure. Only makes sense in terms of the module,
not the device. This is handled by not exposing the parameter via
debugfs.

v2: Fix uc i915 lookup code (Michał Winiarski)

Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com

drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors

DSC is not supported on DP MST streams so just don't add this entry for
MST connectors.

This also fixes an OOPS, caused by the encoder->digport cast, which is
not valid for MST encoders.

v2:
- Check encoder, which is unset for an MST connector, before it gets
enabled.
v3:
- Just don't add this debugfs file for MST connectors. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609184140.4937-1-imre.deak@intel.com

drm: Nuke mode->vrefresh

Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.

Mostly done with cocci, with the following manual fixups:
- Remove the now empty loop in drm_helper_probe_single_connector_modes()
- Fix __MODE() macro in ch7006_mode.c
- Fix DRM_MODE_ARG() macro in drm_modes.h
- Remove leftover comment from samsung_s6d16d0_mode
- Drop the TODO

@@
@@
struct drm_display_mode {
...
- int vrefresh;
...
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N = {
- .vrefresh = E
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N[...] = {
...,
{
- .vrefresh = E
}
,...
};

@@
expression E;
@@
{
DRM_MODE(...),
- .vrefresh = E,
}

@@
identifier M, R;
@@
int drm_mode_vrefresh(const struct drm_display_mode *M)
{
...
- if (M->vrefresh > 0)
- R = M->vrefresh;
- else
if (...) {
...
}
...
}

@@
struct drm_display_mode *p;
expression E;
@@
(
- p->vrefresh = E;
|
- p->vrefresh
+ drm_mode_vrefresh(p)
)

@@
struct drm_display_mode s;
expression E;
@@
(
- s.vrefresh = E;
|
- s.vrefresh
+ drm_mode_vrefresh(&s)
)

@@
expression E;
@@
- drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E)
+ drm_mode_vrefresh(E)

@find_substruct@
identifier X;
identifier S;
@@
struct X {
...
struct drm_display_mode S;
...
};

@@
identifier find_substruct.S;
expression E;
identifier I;
@@
{
.S = {
- .vrefresh = E
}
}

@@
identifier find_substruct.S;
identifier find_substruct.X;
expression E;
identifier I;
@@
struct X I[...] = {
...,
.S = {
- .vrefresh = E
}
,...
};

v2: Drop TODO
v3: Rebase
v4: Rebase

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com

drm/i915: Add i915_lpsp_status debugfs attribute

It requires a separate debugfs attribute to expose lpsp
status to user space, as there may be display less configuration
without any valid connected output, those configuration will not be
able to test lpsp status, if lpsp status exposed from a connector
based debugfs attribute.

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-5-anshuman.gupta@intel.com

drm/i915: Add i915_lpsp_capability debugfs

New i915_pm_lpsp igt solution approach relies on connector specific
debugfs attribute i915_lpsp_capability, it exposes whether an output is
capable of driving lpsp.

v2:
- CI fixup.
v3:
- register i915_lpsp_info only for supported connector. [Jani]
- use intel_display_power_well_is_enabled() instead of looking
inside power_well count. [Jani]
- fixes the lpsp capable conditional logic. [Jani]
- combined the lpsp capable and enable info. [Jani]
v4:
- Separate out connector based debugfs i915_lpsp_capability
lpsp enable status would be exposes by different entry. [Animesh]
v5:
- Add Platform Gen condition to add i915_lpsp_capability
and some cosmetic nitpick changes. [Animesh]

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-3-anshuman.gupta@intel.com

drm/i915/dp: Add debugfs entry for DP phy compliance

These debugfs entry will help testapp to understand the test request
during dp phy compliance mode.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-6-animesh.manna@intel.com

drm/dp_mst: Remove drm_dp_mst_has_audio()

Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever
made sense back when we still had to validate ports before accessing
them in order to (attempt to) avoid NULL dereferences. Since we have
proper reference counting that guarantees we always can safely access
the MST port, there's no use in keeping this function around as all it
does is validate the port pointer before checking the audio status.

Note - drm_dp_mst_port->has_audio is technically protected by
drm_device->mode_config.connection_mutex, since it's only ever updated
from drm_dp_mst_get_edid(). Additionally, we change the declaration for
port in struct intel_connector to be properly typed, so we can directly
access it.

Changes since v1:
* Change type of intel_connector->port in a separate patch - Sean Paul

Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com

drm/i915: have *_debugfs_init() functions return void.

Since commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail), drm_debugfs_create_files() never
fails and should return void. Therefore, remove its use as the
return value of debugfs_init() functions and have the functions return
void.

v2: convert intel_display_debugfs_register() stub to return void too.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-15-wambui.karugax@gmail.com

drm/i915: Unify the DPLL ref clock frequency tracking

All platforms using the shared DPLL framework use 3 reference clocks for
their DPLLs: SSC, non-SSC and DSI. For a more unified way across
platforms store the frequency of these ref clocks as part of the DPLL
global state. This also allows us to keep the HW access reading out the
ref clock value separate from the DPLL frequency calculation that
depends on the ref clock.

For now add only the SSC and non-SSC ref clocks, as the pre-ICL DSI code
has its own logic for calculating DPLL parameters instead of the shared
DPLL framework.

v2:
- Apply the ICL combo PHY PLL ref_clock/2 adjustment during the
frequency->PLL param conversion direction as well. (CI shards)
- s/kHZ/kHz/ (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228153328.17842-1-imre.deak@intel.com

drm/i915: Keep the global DPLL state in a DPLL specific struct

For clarity add a new DPLL specific struct to the i915 device struct and
move all DPLL fields into it. Accordingly remove the dpll_ prefixes, as
the new struct already provides the required namespacing.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-4-imre.deak@intel.com

drm/i915/display: use intel_de_*() functions for register access

The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().

Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().

No functional changes.

Generated using the following semantic patch:

@@
expression REG, OFFSET;
@@
- I915_READ(REG)
+ intel_de_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- POSTING_READ(REG)
+ intel_de_posting_read(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE(REG, OFFSET)
+ intel_de_write(dev_priv, REG, OFFSET)

@@
expression REG;
@@
- I915_READ_FW(REG)
+ intel_de_read_fw(dev_priv, REG)

@@
expression REG, OFFSET;
@@
- I915_WRITE_FW(REG, OFFSET)
+ intel_de_write_fw(dev_priv, REG, OFFSET)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214140910.23194-2-jani.nikula@intel.com

drm/i915: split out display debugfs to a separate file

The i915_debugfs.c has grown more than a little unwieldy. Split out the
display related debugfs code to a file of its own under display/,
initialized with a separate call. No functional changes.

v2:
- Also moved i915_frontbuffer_tracking, i915_gem_framebuffer,
i915_power_domain_info, i915_dmc_info, i915_ipc_status (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211161451.6867-2-jani.nikula@intel.com