#
aa067325 |
|
05-Mar-2024 |
Christoph Hellwig <hch@lst.de> |
drbd: pass the max_hw_sectors limit to blk_alloc_disk Pass a queue_limits structure with the max_hw_sectors limit to blk_alloc_disk instead of updating the limit on the allocated gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305134041.137006-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
74fa8f9c |
|
15-Feb-2024 |
Christoph Hellwig <hch@lst.de> |
block: pass a queue_limits argument to blk_alloc_disk Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Also change blk_alloc_disk to return an ERR_PTR instead of just NULL which can't distinguish errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4b9c2eda |
|
06-Sep-2023 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: swap bvec_set_page len and offset bvec_set_page has the following signature: static inline void bvec_set_page(struct bio_vec *bv, struct page *page, unsigned int len, unsigned int offset) However, the usage in DRBD swaps the len and offset parameters. This leads to a bvec with length=0 instead of the intended length=4096, which causes sock_sendmsg to return -EIO. This leaves DRBD unable to transmit any pages and thus completely broken. Swapping the parameters fixes the regression. Fixes: eeac7405c735 ("drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()") Reported-by: Serguei Ivantsov <manowar@gsc-game.com> Link: https://lore.kernel.org/regressions/CAKH+VT3YLmAn0Y8=q37UTDShqxDLsqPcQ4hBMzY7HPn7zNx+RQ@mail.gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230906133034.948817-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
eeac7405 |
|
23-Jun-2023 |
David Howells <dhowells@redhat.com> |
drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() Use sendmsg() conditionally with MSG_SPLICE_PAGES in _drbd_send_page() rather than calling sendpage() or _drbd_no_send_page(). Signed-off-by: David Howells <dhowells@redhat.com> cc: Philipp Reisner <philipp.reisner@linbit.com> cc: Lars Ellenberg <lars.ellenberg@linbit.com> cc: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> cc: Jens Axboe <axboe@kernel.dk> cc: drbd-dev@lists.linbit.com Link: https://lore.kernel.org/r/20230623225513.2732256-11-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
#
05bdb996 |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: replace fmode_t with a block-specific type for block open flags The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ae220766 |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: remove the unused mode argument to ->release The mode argument to the ->release block_device_operation is never used, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d32e2bf8 |
|
08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: pass a gendisk to ->open ->open is only called on the whole device. Make that explicit by passing a gendisk instead of the block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d519df00 |
|
01-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
drbd: stop defining __KERNEL_SYSCALLS__ __KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop defining it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ad878a0d |
|
29-Mar-2023 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: pass drbd_peer_device to __req_mod In preparation to support multiple connections, we need to know which one we need to modify the request state for. Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
5e54c2a6 |
|
29-Mar-2023 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: INFO_bm_xfer_stats(): Pass a peer device argument Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8164dd6c |
|
29-Mar-2023 |
Andreas Gruenbacher <agruen@kernel.org> |
drbd: Add peer device parameter to whole-bitmap I/O handlers Pass a peer device parameter through the bitmap I/O functions to the I/O handlers. In after_state_ch(), set that parameter when queuing the drbd_send_bitmap operation so that this operation knows where to send the bitmap. Signed-off-by: Andreas Gruenbacher <agruen@kernel.org> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
4e2da933 |
|
13-Jan-2023 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: drop API_VERSION define Use the genetlink api version as defined in drbd_genl_api.h. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
887b98c7 |
|
13-Jan-2023 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: split off drbd_buildtag into separate file To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
292a089d |
|
20-Dec-2022 |
Steven Rostedt (Google) <rostedt@goodmis.org> |
treewide: Convert del_timer*() to timer_shutdown*() Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
677b3672 |
|
30-Nov-2022 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: add context parameter to expect() macro Originally-from: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e3fa02d7 |
|
30-Nov-2022 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: introduce drbd_ratelimit() Use call site specific ratelimit instead of one single static global. Also ratelimit ASSERTION messages generated by expect(). Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
de4eda9d |
|
15-Sep-2022 |
Al Viro <viro@zeniv.linux.org.uk> |
use less confusing names for iov_iter direction initializers READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
8692814b |
|
23-Nov-2022 |
Wang ShaoBo <bobo.shaobowang@huawei.com> |
drbd: destroy workqueue when drbd device was freed A submitter workqueue is dynamically allocated by init_submitter() called by drbd_create_device(), we should destroy it when this device is not needed or destroyed. Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6e7b854e |
|
23-Nov-2022 |
Wang ShaoBo <bobo.shaobowang@huawei.com> |
drbd: remove call to memset before free device/resource/connection This revert c2258ffc56f2 ("drbd: poison free'd device, resource and connection structs"), add memset is odd here for debugging, there are some methods to accurately show what happened, such as kdump. Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
93c68cc4 |
|
22-Nov-2022 |
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> |
drbd: use consistent license DRBD currently has a mix of GPL-2.0 and GPL-2.0-or-later SPDX license identifiers. We have decided to stick with GPL 2.0 only, so consistently use that identifier. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221122134301.69258-5-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a7a15981 |
|
15-Nov-2022 |
Dan Carpenter <error27@gmail.com> |
drbd: use after free in drbd_create_device() The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. Fixes: b6f85ef9538b ("drbd: Iterate over all connections") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8b9ab626 |
|
19-Jun-2022 |
Christoph Hellwig <hch@lst.de> |
block: remove blk_cleanup_disk blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
33cb0917 |
|
06-Apr-2022 |
Arnd Bergmann <arnd@arndb.de> |
drbd: fix duplicate array initializer There are two initializers for P_RETRY_WRITE: drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init] Remove the first one since it was already ignored by the compiler and reorder the list to match the enum definition. As P_ZEROES had no entry, add that one instead. Fixes: 036b17eaab93 ("drbd: Receiving part for the PROTOCOL_UPDATE packet") Fixes: f31e583aa2c2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
70200574 |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
block: remove QUEUE_FLAG_DISCARD Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c6f23b1a |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
drbd: use bdev_alignment_offset instead of queue_alignment_offset The bdev version does the right thing for partitions, so use that. Fixes: 9104d31a759f ("drbd: introduce WRITE_SAME support") Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220415045258.199825-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
7a38acce |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
drbd: use bdev based limit helpers in drbd_send_sizes Use the bdev based limits helpers where they exist. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220415045258.199825-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
40349d0e |
|
14-Apr-2022 |
Christoph Hellwig <hch@lst.de> |
drbd: remove assign_p_sizes_qlim Fold each branch into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220415045258.199825-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
28690194 |
|
06-Apr-2022 |
Christoph Böhmwalder <christoph@boehmwalder.at> |
drbd: set QUEUE_FLAG_STABLE_WRITES We want our pages not to change while they are being written. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ae4d37b5 |
|
06-Apr-2022 |
Xiaomeng Tong <xiam0nd.tong@gmail.com> |
drbd: fix an invalid memory access caused by incorrect use of list iterator The bug is here: idr_remove(&connection->peer_devices, vnr); If the previous for_each_connection() don't exit early (no goto hit inside the loop), the iterator 'connection' after the loop will be a bogus pointer to an invalid structure object containing the HEAD (&resource->connections). As a result, the use of 'connection' above will lead to a invalid memory access (including a possible invalid free as idr_remove could call free_layer). The original intention should have been to remove all peer_devices, but the following lines have already done the work. So just remove this line and the unneeded label, to fix this bug. Cc: stable@vger.kernel.org Fixes: c06ece6ba6f1b ("drbd: Turn connection->volumes into connection->peer_devices") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
901aeda6 |
|
31-Mar-2022 |
Jakob Koschel <jakobkoschel@gmail.com> |
drbd: remove usage of list iterator variable after loop In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or skip the iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a34592ff |
|
09-Feb-2022 |
Christoph Hellwig <hch@lst.de> |
scsi: drbd: Remove WRITE_SAME support REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing code, which has switched to use REQ_OP_WRITE_ZEROES long ago. Link: https://lore.kernel.org/r/20220209082828.2629273-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
52a0cab3 |
|
18-Nov-2021 |
Kees Cook <keescook@chromium.org> |
drbd: Use struct_group() to zero algs In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Add a struct_group() for the algs so that memset() can correctly reason about the size. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20211118203712.1288866-1-keescook@chromium.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
1ebe2e5f |
|
22-Nov-2021 |
Christoph Hellwig <hch@lst.de> |
block: remove GENHD_FL_EXT_DEVT All modern drivers can support extra partitions using the extended dev_t. In fact except for the ioctl method drivers never even see partitions in normal operation. So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all block devices that do support partitions, and require those that do not support partitions to explicit disallow them using GENHD_FL_NO_PART. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
27548088 |
|
04-Nov-2021 |
Wu Bo <wubo40@huawei.com> |
drbd: Fix double free problem in drbd_create_device In drbd_create_device(), the 'out_no_io_page' lable has called blk_cleanup_disk() when return failed. So remove the 'out_cleanup_disk' lable to avoid double free the disk pointer. Fixes: e92ab4eda516 ("drbd: add error handling support for add_disk()") Signed-off-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1636013229-26309-1-git-send-email-wubo40@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
e92ab4ed |
|
27-Sep-2021 |
Luis Chamberlain <mcgrof@kernel.org> |
drbd: add error handling support for add_disk() We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
b647ad02 |
|
20-May-2021 |
Christoph Hellwig <hch@lst.de> |
drbd: convert to blk_alloc_disk/blk_cleanup_disk Convert the drbd driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9c282c29 |
|
06-Apr-2021 |
Guobin Huang <huangguobin4@huawei.com> |
drbd: use DEFINE_SPINLOCK() for spinlock spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Link: https://lore.kernel.org/r/1617710988-49205-1-git-send-email-huangguobin4@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
584164c8 |
|
12-Mar-2021 |
Lee Jones <lee.jones@linaro.org> |
block: drbd: drbd_main: Fix a bunch of function documentation discrepancies Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_main.c:278: warning: Function parameter or member 'connection' not described in 'tl_clear' drivers/block/drbd/drbd_main.c:278: warning: Excess function parameter 'device' description in 'tl_clear' drivers/block/drbd/drbd_main.c:489: warning: Function parameter or member 'cpu_mask' not described in 'drbd_calc_cpu_mask' drivers/block/drbd/drbd_main.c:528: warning: Excess function parameter 'device' description in 'drbd_thread_current_set_cpu' drivers/block/drbd/drbd_main.c:549: warning: Function parameter or member 'connection' not described in 'drbd_header_size' drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'device' not described in 'send_bitmap_rle_or_plain' drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'c' not described in 'send_bitmap_rle_or_plain' drivers/block/drbd/drbd_main.c:1335: warning: Function parameter or member 'peer_device' not described in '_drbd_send_ack' drivers/block/drbd/drbd_main.c:1335: warning: Excess function parameter 'device' description in '_drbd_send_ack' drivers/block/drbd/drbd_main.c:1379: warning: Function parameter or member 'peer_device' not described in 'drbd_send_ack' drivers/block/drbd/drbd_main.c:1379: warning: Excess function parameter 'device' description in 'drbd_send_ack' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'connection' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'sock' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'buffer' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'size' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'msg_flags' not described in 'drbd_send_all' drivers/block/drbd/drbd_main.c:3525: warning: Function parameter or member 'flags' not described in 'drbd_queue_bitmap_io' drivers/block/drbd/drbd_main.c:3563: warning: Function parameter or member 'flags' not described in 'drbd_bitmap_io' Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-9-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
f58a0d18 |
|
12-Mar-2021 |
Lee Jones <lee.jones@linaro.org> |
block: drbd: drbd_main: Remove duplicate field initialisation [P_RETRY_WRITE] is initialised more than once. Fixes the following W=1 kernel build warning(s): drivers/block/drbd/drbd_main.c: In function ‘cmdname’: drivers/block/drbd/drbd_main.c:3660:22: warning: initialized field overwritten [-Woverride-init] drivers/block/drbd/drbd_main.c:3660:22: note: (near initialization for ‘cmdnames[44]’) Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-7-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
19304f95 |
|
26-Jan-2021 |
Christoph Hellwig <hch@lst.de> |
drbd: remove bio_alloc_drbd Given that drbd_md_io_bio_set is initialized during module initialization and the module fails to load if the initialization fails there is no need to fall back to plain bio_alloc. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
370276ba |
|
21-Jan-2021 |
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> |
drbd: remove unused argument from drbd_request_prepare and __drbd_make_request We can remove start_jif since it is not used by drbd_request_prepare, then remove it from __drbd_make_request further. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
bc254eb4 |
|
16-Nov-2020 |
Christoph Hellwig <hch@lst.de> |
drbd: use set_capacity_and_notify Use set_capacity_and_notify to set the size of both the disk and block device. This also gets the uevent notifications for the resize for free. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
155bd9d1 |
|
25-Sep-2020 |
Christoph Hellwig <hch@lst.de> |
drbd: remove ->this_bdev DRBD keeps a block device open just to get and set the capacity from it. Switch to primarily using the disk capacity as intended by the block layer, and sync it to the bdev using revalidate_disk_size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
fb25ebe1 |
|
02-Oct-2020 |
Coly Li <colyli@suse.de> |
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() In _drbd_send_page() a page is checked by following code before sending it by kernel_sendpage(), (page_count(page) < 1) || PageSlab(page) If the check is true, this page won't be send by kernel_sendpage() and handled by sock_no_sendpage(). This kind of check is exactly what macro sendpage_ok() does, which is introduced into include/linux/net.h to solve a similar send page issue in nvme-tcp code. This patch uses macro sendpage_ok() to replace the open coded checks to page type and refcount in _drbd_send_page(), as a code cleanup. Signed-off-by: Coly Li <colyli@suse.de> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
74f94454 |
|
02-Sep-2020 |
Christoph Hellwig <hch@lst.de> |
drbd: don't set ->bd_contains The ->bd_contains field is set by __blkdev_get and drivers have no business manipulating it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
df561f66 |
|
23-Aug-2020 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
#
21cf8661 |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
writeback: remove bdi->congested_fn Except for pktdvd, the only places setting congested bits are file systems that allocate their own backing_dev_info structures. And pktdvd is a deprecated driver that isn't useful in stack setup either. So remove the dead congested_fn stacking infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [axboe: fixup unused variables in bcache/request.c] Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ed00aabd |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
block: rename generic_make_request to submit_bio_noacct generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c62b37d9 |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
block: move ->make_request_fn to struct block_device_operations The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
84bc83c3 |
|
01-Jul-2020 |
Christoph Hellwig <hch@lst.de> |
drbd: stop using ->queuedata Instead of setting up the queuedata as well just use one private data field. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
12abc5ee |
|
27-May-2020 |
Christoph Hellwig <hch@lst.de> |
tcp: add tcp_sock_set_nodelay Add a helper to directly set the TCP_NODELAY sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3d745ea5 |
|
27-Mar-2020 |
Christoph Hellwig <hch@lst.de> |
block: simplify queue allocation Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
91dfa2dd |
|
06-Mar-2020 |
Jackie Liu <liuyun01@kylinos.cn> |
block/drbd: delete invalid function drbd_md_mark_dirty_ We deleted last_md_mark_dirty long ago, this function no longer needs to exist, delete it, otherwise a compilation error will occur when DEBUG is opened. Fixes: ac0acb9e39ac ("drbd: use drbd_device_post_work() in more place") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8e9c5230 |
|
07-Nov-2019 |
Dan Carpenter <dan.carpenter@oracle.com> |
block: drbd: remove a stray unlock in __drbd_send_protocol() There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
33da8e7c |
|
15-Aug-2019 |
Eric W. Biederman <ebiederm@xmission.com> |
signal: Allow cifs and drbd to receive their terminating signals My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Steve French <smfrench@gmail.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: David Laight <David.Laight@ACULAB.COM> Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes") Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig") Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
#
d27e84a3 |
|
18-Jun-2019 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
block: drbd: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
fee10990 |
|
05-Feb-2019 |
Eric W. Biederman <ebiederm@xmission.com> |
signal/drbd: Use send_sig not force_sig The drbd module exclusively sends signals to kernel threads it creates with kthread_create. These kernel threads do not block or ignore signals (only flush signals after they have been delivered), nor can drbd threads possibly be pid namespace init processes so the extra work that force_sig performs that send_sig does not is unnecessary. Further force_sig is for delivering synchronous signals (aka exceptions). The locking in force_sig is not prepared to deal with running processes, as tsk->sighand may change during exec for a running process. In short it is not only unnecessary for drbd to use force_sig it is semantically wrong. With drbd using send_sig it becomes easier to maintain force_sig as only synchronous signals need to be considered. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
#
c6ae4c04 |
|
22-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 91 Based on 1 normalized pattern(s): is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version [drbd] is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with [drbd] see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520075212.050796421@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
f31e583a |
|
20-Dec-2018 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d5412e8d |
|
20-Dec-2018 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: centralize printk reporting of new size into drbd_set_my_capacity() Previously, some implicit resizes that happend during handshake have not been reported as prominently as explicit resize. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6d469642 |
|
14-Nov-2018 |
Christoph Hellwig <hch@lst.de> |
block: remove the lock argument to blk_alloc_queue_node With the legacy request path gone there is no real need to override the queue_lock. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8295a69b |
|
14-Nov-2018 |
Christoph Hellwig <hch@lst.de> |
drbd: don't override the queue_lock The DRBD req_lock and block layer queue_lock are used for entirely different resources. Stop using the req_lock as the block layer queue_lock. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
aa563d7b |
|
19-Oct-2018 |
David Howells <dhowells@redhat.com> |
iov_iter: Separate type from direction and use accessor functions In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
|
#
9305455a |
|
03-Oct-2018 |
Bart Van Assche <bvanassche@acm.org> |
block: Finish renaming REQ_DISCARD into REQ_OP_DISCARD Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments and documentation files were not updated however. Update these comments and documentation files. See also commit 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3d0e6375 |
|
06-Aug-2018 |
Kees Cook <keescook@chromium.org> |
drbd: Convert from ahash to shash In preparing to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash to direct shash. By removing a layer of indirection this both improves performance and reduces stack usage. The stack allocation will be made a fixed size in a later patch to the crypto subsystem. The bulk of the lines in this change are simple s/ahash/shash/, but the main logic differences are in drbd_csum_ee() and drbd_csum_bio(), which externalizes the page walking with k(un)map_atomic() instead of using scattergather. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
a12fc00b |
|
08-Aug-2018 |
zhong jiang <zhongjiang@huawei.com> |
drivers/block/drbd: remove the null check for kmem_cache_destroy kmem_cache_destroy has taken null pointer into account. So it is safe to drop the null check before calling the function. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6396bb22 |
|
12-Jun-2018 |
Kees Cook <keescook@chromium.org> |
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
0892fac8 |
|
20-May-2018 |
Kent Overstreet <kent.overstreet@gmail.com> |
drbd: convert to bioset_init()/mempool_init() Convert drbd to embedded bio sets and mempools. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
5657a819 |
|
24-May-2018 |
Joe Perches <joe@perches.com> |
block drivers/block: Use octal not symbolic permissions Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
004fd11d |
|
11-Apr-2018 |
Christoph Hellwig <hch@lst.de> |
drbd: switch to proc_create_single And stop messing with try_module_get on THIS_MODULE, which doesn't make any sense here. Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
498f6650 |
|
28-Feb-2018 |
Bart Van Assche <bvanassche@acm.org> |
block: Fix a race between the cgroup code and request queue initialization Initialize the request queue lock earlier such that the following race can no longer occur: blk_init_queue_node() blkcg_print_blkgs() blk_alloc_queue_node (1) q->queue_lock = &q->__queue_lock (2) blkcg_init_queue(q) (3) spin_lock_irq(blkg->q->queue_lock) (4) q->queue_lock = lock (5) spin_unlock_irq(blkg->q->queue_lock) (6) (1) allocate an uninitialized queue; (2) initialize queue_lock to its default internal lock; (3) initialize blkcg part of request queue, which will create blkg and then insert it to blkg_list; (4) traverse blkg_list and find the created blkg, and then take its queue lock, here it is the default *internal lock*; (5) *race window*, now queue_lock is overridden with *driver specified lock*; (6) now unlock *driver specified lock*, not the locked *internal lock*, unlock balance breaks. The changes in this patch are as follows: - Move the .queue_lock initialization from blk_init_queue_node() into blk_alloc_queue_node(). - Only override the .queue_lock pointer for legacy queues because it is not useful for blk-mq queues to override this pointer. - For all all block drivers that initialize .queue_lock explicitly, change the blk_alloc_queue() call in the driver into a blk_alloc_queue_node() call and remove the explicit .queue_lock initialization. Additionally, initialize the spin lock that will be used as queue lock earlier if necessary. Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
f7765c36 |
|
20-Sep-2017 |
Al Viro <viro@zeniv.linux.org.uk> |
drbd: switch to sock_recvmsg() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
2bccef39 |
|
17-Oct-2017 |
Kees Cook <keescook@chromium.org> |
drbd: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
974c5856 |
|
30-Aug-2017 |
NeilBrown <neilb@suse.com> |
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set Careful analysis shows that this flag is not needed. The RESCUER flag is only needed when a make_request_fn might: - allocate a bio from the bioset - submit it with generic_make_request() or similar - allocate another bio from the bioset The second allocation can block until the first bio is processed, so a rescuer is needed to ensure the first bio does get processed. With a rescuer it will only get processed when the make_request_fn completes. In drbd, allocations from drbd_io_bio_set happen from drbd_new_req() or w_restart_disk_io() which is only called to handle RESTART_FROZEN_DISK_IO. In former is called precisely once from the make_request_fn. The later is never called by within the make_request_fn. So there cannot be two allocations in the same call to the make_request_fn, so a rescuer is not needed. Allocations from drbd_md_io_bio_set are used for IO to the bitmap and the activity log. There are only accessed from worker threads and workqueues, never directly from make_request_fn. Again, the rescuer isn't needed. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
5fc1efd5 |
|
30-Aug-2017 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fix allyesconfig build, fix recent commit Globals where prefixed with drbd_, that was missed in the in #ifdef'nd code when it is built-in. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Fixes: 183ece30053f ("drbd: move global variables to drbd namespace and make some static") Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
183ece30 |
|
29-Aug-2017 |
Roland Kammerer <roland.kammerer@linbit.com> |
drbd: move global variables to drbd namespace and make some static This is a follow-up to Gregs complaints that drbd clutteres the global namespace. Some of DRBD's module parameters are only used within one compilation unit. Make these static. Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8ab761e1 |
|
29-Aug-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
drbd: rename "usermode_helper" to "drbd_usermode_helper" Nothing like having a very generic global variable in a tiny driver subsystem to make a mess of the global namespace... Note, there are many other "generic" named global variables in the drbd subsystem, someone should fix those up one day before they hit a linking error. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3f1a1b7c |
|
29-Aug-2017 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix rmmod cleanup, remove _all_ debugfs entries If there are still resources defined, but "empty", no more volumes or connections configured, they don't hold module reference counts, so rmmod is possible. To avoid DRBD leftovers in debugfs, we need to call our global drbd_debugfs_cleanup() only after all resources have been cleaned up. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
be7445a3 |
|
29-Aug-2017 |
Geliang Tang <geliangtang@gmail.com> |
drbd: Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
1ffa7bfa |
|
29-Aug-2017 |
Baoyou Xie <baoyou.xie@linaro.org> |
drbd: mark symbols static where possible We get a few warnings when building kernel with W=1: drbd/drbd_receiver.c:1224:6: warning: no previous prototype for 'one_flush_endio' [-Wmissing-prototypes] drbd/drbd_req.c:1450:6: warning: no previous prototype for 'send_and_submit_pending' [-Wmissing-prototypes] drbd/drbd_main.c:924:6: warning: no previous prototype for 'assign_p_sizes_qlim' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c51a0ef3 |
|
29-Aug-2017 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce drbd_recv_header_maybe_unplug Recently, drbd_recv_header() was changed to potentially implicitly "unplug" the backend device(s), in case there is currently nothing to receive. Be more explicit about it: re-introduce the original drbd_recv_header(), and introduce a new drbd_recv_header_maybe_unplug() for use by the receiver "main loop". Using explicit plugging via blk_start_plug(); blk_finish_plug(); really helps the io-scheduler of the backend with merging requests. Wrap the receiver "main loop" with such a plug. Also catch unplug events on the Primary, and try to propagate. This is performance relevant. Without this, if the receiving side does not merge requests, number of IOPS on the peer can me significantly higher than IOPS on the Primary, and can easily become the bottleneck. Together, both changes should help to reduce the number of IOPS as seen on the backend of the receiving side, by increasing the chance of merging mergable requests, without trading latency for more throughput. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
0b0bcacc |
|
19-Jun-2017 |
Christoph Hellwig <hch@lst.de> |
block: don't bother with bounce limits for make_request drivers We only call blk_queue_bounce for request-based drivers, so stop messing with it for make_request based drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
8cb0defb |
|
17-Jun-2017 |
NeilBrown <neilb@suse.com> |
drbd: use bio_clone_fast() instead of bio_clone() drbd does not modify the bi_io_vec of the cloned bio, so there is no need to clone that part. So bio_clone_fast() is the better choice. For bio_clone_fast() we need to specify a bio_set. We could use fs_bio_set, which bio_clone() uses, or drbd_md_io_bio_set, which drbd uses for metadata, but it is generally best to avoid sharing bio_sets unless you can be certain that there are no interdependencies. So create a new bio_set, drbd_io_bio_set, and use bio_clone_fast(). Also remove a "XXX cannot fail ???" comment because it definitely cannot fail - bio_clone_fast() doesn't fail if the GFP flags allow for sleeping. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
47e0fb46 |
|
17-Jun-2017 |
NeilBrown <neilb@suse.com> |
blk: make the bioset rescue_workqueue optional. This patch converts bioset_create() to not create a workqueue by default, so alloctions will never trigger punt_bios_to_rescuer(). It also introduces a new flag BIOSET_NEED_RESCUER which tells bioset_create() to preserve the old behavior. All callers of bioset_create() that are inside block device drivers, are given the BIOSET_NEED_RESCUER flag. biosets used by filesystems or other top-level users do not need rescuing as the bio can never be queued behind other bios. This includes fs_bio_set, blkdev_dio_pool, btrfs_bioset, xfs_ioend_bioset, and one allocated by target_core_iblock.c. biosets used by md/raid do not need rescuing as their usage was recently audited and revised to never risk deadlock. It is hoped that most, if not all, of the remaining biosets can end up being the non-rescued version. Reviewed-by: Christoph Hellwig <hch@lst.de> Credit-to: Ming Lei <ming.lei@redhat.com> (minor fixes) Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
011067b0 |
|
17-Jun-2017 |
NeilBrown <neilb@suse.com> |
blk: replace bioset_create_nobvec() with a flags arg to bioset_create() "flags" arguments are often seen as good API design as they allow easy extensibility. bioset_create_nobvec() is implemented internally as a variation in flags passed to __bioset_create(). To support future extension, make the internal structure part of the API. i.e. add a 'flags' argument to bioset_create() and discard bioset_create_nobvec(). Note that the bio_split allocations in drivers/md/raid* do not need the bvec mempool - they should have used bioset_create_nobvec(). Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
10428957 |
|
26-May-2017 |
Al Viro <viro@zeniv.linux.org.uk> |
drbd: ->sendpage() never needed set_fs() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
48920ff2 |
|
05-Apr-2017 |
Christoph Hellwig <hch@lst.de> |
block: remove the discard_zeroes_data flag Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
45c21793 |
|
05-Apr-2017 |
Christoph Hellwig <hch@lst.de> |
drbd: implement REQ_OP_WRITE_ZEROES It seems like DRBD assumes its on the wire TRIM request always zeroes data. Use that fact to implement REQ_OP_WRITE_ZEROES. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
174cd4b1 |
|
02-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
d3e709e6 |
|
22-Dec-2016 |
Matthew Wilcox <willy@infradead.org> |
idr: Return the deleted entry from idr_remove It is a relatively common idiom (8 instances) to first look up an IDR entry, and then remove it from the tree if it is found, possibly doing further operations upon the entry afterwards. If we change idr_remove() to return the removed object, all of these users can save themselves a walk of the IDR tree. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
|
#
dc3b17cc |
|
02-Feb-2017 |
Jan Kara <jack@suse.cz> |
block: Use pointer to backing_dev_info from request_queue We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
bdfafc4f |
|
14-Nov-2016 |
Peter Zijlstra <peterz@infradead.org> |
locking/atomic, kref: Kill kref_sub() By general sentiment kref_sub() is a bad interface, make it go away. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
79ab80be |
|
10-Dec-2014 |
Al Viro <viro@zeniv.linux.org.uk> |
[drbd] use sock_sendmsg() ... and keep ->msg_iter through the loop Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
d8e9e5e8 |
|
09-Nov-2016 |
Richard Weinberger <richard@nod.at> |
drbd: Fix kernel_sendmsg() usage - potential NULL deref Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bd ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b3637fa7 ("The DRBD driver") Cc: <stable@vger.kernel.org> # 2.6.33.x- Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by: Christoph Lechleitner <christoph.lechleitner@iteg.at> Tested-by: Christoph Lechleitner <christoph.lechleitner@iteg.at> Signed-off-by: Richard Weinberger <richard@nod.at> [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
1eff9d32 |
|
05-Aug-2016 |
Jens Axboe <axboe@fb.com> |
block: rename bio bi_rw to bi_opf Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
7e5fec31 |
|
13-Jun-2016 |
Fabian Frederick <fabf@skynet.be> |
drbd: code cleanups without semantic changes This contains various cosmetic fixes ranging from simple typos to const-ifying, and using booleans properly. Original commit messages from Fabian's patch set: drbd: debugfs: constify drbd_version_fops drbd: use seq_put instead of seq_print where possible drbd: include linux/uaccess.h instead of asm/uaccess.h drbd: use const char * const for drbd strings drbd: kerneldoc warning fix in w_e_end_data_req() drbd: use unsigned for one bit fields drbd: use bool for peer is_ states drbd: fix typo drbd: use | for bitmask combination drbd: use true/false for bool drbd: fix drbd_bm_init() comments drbd: introduce peer state union drbd: fix maybe_pull_ahead() locking comments drbd: use bool for growing drbd: remove redundant declarations drbd: replace if/BUG by BUG_ON Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
9104d31a |
|
13-Jun-2016 |
Lars Ellenberg <lars@linbit.com> |
drbd: introduce WRITE_SAME support We will support WRITE_SAME, if * all peers support WRITE_SAME (both in kernel and DRBD version), * all peer devices support WRITE_SAME * logical_block_size is identical on all peers. We may at some point introduce a fallback on the receiving side for devices/kernels that do not support WRITE_SAME, by open-coding a submit loop. But not yet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
bca1cbae |
|
13-Jun-2016 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: adjust assert in w_bitmap_io to account for BM_LOCKED_CHANGE_ALLOWED Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
700ca8c0 |
|
13-Jun-2016 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implement handling of thinly provisioned storage on resync target nodes If during resync we read only zeroes for a range of sectors assume that these secotors can be discarded on the sync target node. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
c0065f98 |
|
13-Jun-2016 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: bitmap bulk IO: do not always suspend IO The intention was to only suspend IO if some normal bitmap operation is supposed to be locked out, not always. If the bulk operation is flaged as BM_LOCKED_CHANGE_ALLOWED, we do not need to suspend IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
28a8f0d3 |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
bb3cc85e |
|
05-Jun-2016 |
Mike Christie <mchristi@redhat.com> |
drbd: use bio op accessors Separate the op from the rq_flag_bits and have drbd set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
fe8fb75e |
|
30-Mar-2016 |
Jens Axboe <axboe@fb.com> |
drbd: switch to using blk_queue_write_cache() Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
|
#
9534d671 |
|
24-Jan-2016 |
Herbert Xu <herbert@gondor.apana.org.au> |
drbd: Use shash and ahash This patch replaces uses of the long obsolete hash interface with either shash (for non-SG users) or ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
#
5bded4ef |
|
16-Apr-2015 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't block forever in disconnect during resync if fencing=r-a-stonith Disconnect should wait for pending bitmap IO. But if that bitmap IO is not happening, because it is waiting for pending application IO, and there is no progress, because the fencing policy suspended application IO because of the disconnect, then we deadlock. The bitmap writeout in this case does not care for concurrent application IO, so there is no point waiting for it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
63a7c8ad |
|
26-Mar-2015 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: make drbd known to lsblk: use bd_link_disk_holder lsblk should be able to pick up stacking device driver relations involving DRBD conveniently. Even though upstream kernel since 2011 says "DON'T USE THIS UNLESS YOU'RE ALREADY USING IT." a new user has been added since (bcache), which sets the precedences for us to use it as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
edb5e5f6 |
|
24-Mar-2015 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix spurious alert level printk When accessing out meta data area on disk, we double check the plausibility of the requested sector offsets, and are very noisy about it if they look suspicious. During initial read of our "superblock", for "external" meta data, this triggered because the range estimate returned by drbd_md_last_sector() was still wrong. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
39e91a60 |
|
24-Mar-2015 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use resource name in workqueue Since kernel 3.3, we can use snprintf-style arguments to create a workqueue. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
668700b4 |
|
16-Mar-2015 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Create a dedicated workqueue for sending acks on the control connection The intention is to reduce CPU utilization. Recent measurements unveiled that the current performance bottleneck is CPU utilization on the receiving node. The asender thread became CPU limited. One of the main points is to eliminate the idr_for_each_entry() loop from the sending acks code path. One exception in that is sending back ping_acks. These stay in the ack-receiver thread. Otherwise the logic becomes too complicated for no added value. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
1c03e520 |
|
16-Mar-2015 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Rename asender to ack_receiver This prepares the next patch where the sending on the meta (or control) socket is moved to a dedicated workqueue. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
28bc3b8c |
|
14-Aug-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Fix locking across all resources Instead of using a rwlock for synchronizing state changes across resources, take the request locks of all resources for global state changes. Use resources_mutex to serialize global state changes. This means that taking the request lock of a resource is now enough to prevent changes of that resource. (Previously, a read lock on the global state lock was needed as well.) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
f6ba8636 |
|
13-Aug-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move enum write_ordering_e to drbd.h Also change the enum values to all-capital letters. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
8ae12666 |
|
28-Apr-2015 |
Kent Overstreet <kent.overstreet@gmail.com> |
block: kill merge_bvec_fn() completely As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
4452226e |
|
22-May-2015 |
Tejun Heo <tj@kernel.org> |
writeback: move backing_dev_info->state into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->state into wb. * enum bdi_state is renamed to wb_state and the prefix of all enums is changed from BDI_ to WB_. * Explicit zeroing of bdi->state is removed without adding zeoring of wb->state as the whole data structure is zeroed on init anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->state are mechanically replaced with bdi->wb.state introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: drbd-dev@lists.linbit.com Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
cbc4ffdb |
|
24-Mar-2015 |
David Rientjes <rientjes@google.com> |
block, drbd: use mempool_create_slab_pool() Mempools created for slab caches should use mempool_create_slab_pool(). Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
f221f4bc |
|
10-Nov-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Only use drbd_msg_put_info() in drbd_nl.c Avoid generic netlink calls in other parts of the code base. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
179e20b8 |
|
10-Nov-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Minor cleanups . Update comments . drbd_set_{in,out_of}_sync(): Remove unused parameters . Move common code into adm_del_resource() . Redefine ERR_MINOR_EXISTS -> ERR_MINOR_OR_VOLUME_EXISTS Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
11f8b2b6 |
|
11-Sep-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Use better variable names Rename local variable 'ds' to 'disk_state' or 'data_size'. 'dgs' to 'digest_size' Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
1e39152f |
|
19-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: implicitly truncate cpu-mask Don't error out with misleading "out of memory" if the cpu-mask has more bits set than there are CPUs. Just truncate to nr_cpu_ids implicitly. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f418815f |
|
05-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: debugfs: Add in_flight_summary * Add details about pending meta data operations to in_flight_summary. * Report number of requests waiting for activity log transactions. * timing details of peer_requests to in_flight_summary. * FLUSH details DRBD devides the incoming request stream into "epochs", in which peers are allowed to re-order writes independendly. These epochs are separated by P_BARRIER on the replication link. Such barrier packets, depending on configuration, may cause the receiving side to drain the lower level device request queues and call blkdev_issue_flush(). This is known to be an other major source of latency in DRBD. Track timing details of calls to blkdev_issue_flush(), and add them to in_flight_summary. * data socket stats To be able to diagnose bottlenecks and root causes of "slow" IO on DRBD, it is useful to see network buffer stats along with the timing details of requests, peer requests, and meta data IO. * pending bitmap IO timing details to in_flight_summary. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4d3d5aa8 |
|
02-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: debugfs: add basic hierarchy Add new debugfs hierarchy /sys/kernel/debug/ drbd/ resources/ $resource_name/connections/peer/$volume_number/ $resource_name/volumes/$volume_number/ minors/$minor_number -> ../resources/$resource_name/volumes/$volume_number/ Followup commits will populate this hierarchy with files containing statistics, diagnostic information and some attribute data. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4ce49266 |
|
05-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: track details of bitmap IO Track start and submit time of bitmap operations, and add pending bitmap IO contexts to a new pending_bitmap_io list. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ad3fee79 |
|
20-Dec-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: improve throttling decisions of background resynchronisation Background resynchronisation does some "side-stepping", or throttles itself, if it detects application IO activity, and the current resync rate estimate is above the configured "cmin-rate". What was not detected: if there is no application IO, because it blocks on activity log transactions. Introduce a new atomic_t ap_actlog_cnt, tracking such blocked requests, and count non-zero as application IO activity. This counter is exposed at proc_details level 2 and above. Also make sure to release the currently locked resync extent if we side-step due to such voluntary throttling. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
844a6ae7 |
|
21-Nov-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: add lists to find oldest pending requests Adding requests to per-device fifo lists as soon as possible after allocating them leaves a simple list_first_entry_or_null() to find the oldest request, regardless what it is still waiting for. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e5f891b2 |
|
21-Nov-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: gather detailed timing statistics for drbd_requests Record (in jiffies) how much time a request spends in which stages. Followup commits will use and present this additional timing information so we can better locate and tackle the root causes of latency spikes, or present the backlog for asynchronous replication. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e37d2438 |
|
01-Apr-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: track meta data IO intent, start and submit time For diagnostic purposes, track intent, start time and latest submit time of meta data IO. Move separate members from struct drbd_device into the embeded struct drbd_md_io. s/md_io_(page|in_use)/md_io.\1/ Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a8ba0d60 |
|
14-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix drbd_destroy_device reference count updates drbd_destroy_device means to give up reference counts on the connection(s) reachable via the peer_device(s). It must not do that by iterating via device->resource->connections, resource and connections may have already been disassociated by drbd_free_resource, and we'd leak connection refs. Instead, iterate via device->peer_devices->connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c2258ffc |
|
14-May-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: poison free'd device, resource and connection structs Now that we have additional asynchronous kref_get/kref_put via debugfs, make sure we catch access after free. Poison struct drbd_device, drbd_connection and drbd_resource before kfree() with 0xfd, 0xfc, and 0xf2, respectively. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f88c5d90 |
|
27-Mar-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: cosmetic: change all printk(level, ...) to pr_<level>(...) Cosmetic change only. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
08d0dabf |
|
20-Mar-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: application writes may set-in-sync in protocol != C If "dirty" blocks are written to during resync, that brings them in-sync. By explicitly requesting write-acks during resync even in protocol != C, we now can actually respect this. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
caa3db0e |
|
27-Feb-2014 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove unnecessary/unused code Get rid of dump_stack() debug statements. There is no point whatsoever in registering and unregistering a reboot notifier that doesn't do anything. The intention was to switch to an "emergency read-only" mode, so we won't have to resync the full activity log just because we had been Primary before the reboot. Once we have that implemented, we may re-introduce the reboot notifier. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8ce953aa |
|
27-Feb-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: silence -Wmissing-prototypes warnings Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ac0acb9e |
|
11-Feb-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use drbd_device_post_work() in more places This replaces the md_sync_work member of struct drbd_device by a new MD_SYNC "work bit" in device->flags. This replaces the resync_start_work member of struct drbd_device by a new RS_START "work bit" in device->flags. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e334f550 |
|
11-Feb-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: make sure disk cleanup happens in worker context The recent fix to put_ldev() (correct ordering of access to local_cnt and state.disk; memory barrier in __drbd_set_state) guarantees that the cleanup happens exactly once. However it does not yet guarantee that the cleanup happens from worker context, the last put_ldev() may still happen from atomic context, which must not happen: blkdev_put() may sleep. Fix this by scheduling the cleanup to the worker instead, using a couple more bits in device->flags and a new helper, drbd_device_post_work(). Generalized the "resync progress" work to cover these new work bits. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
123ff122 |
|
04-Feb-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: trigger tcp_push_pending_frames() for PING and PING_ACK This should reduce latency for such in-DRBD-protocol "pings", and may help reduce spurious disconnect/reconnect cycles due to "PingAck did not arrive in time." Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
28995af5 |
|
22-Nov-2013 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: rename drbd_free_bc() to drbd_free_ldev() Since the member of drbd_device is called ldev Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8fe39aac |
|
22-Nov-2013 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: device->ldev is not guaranteed on an D_ATTACHING disk Some parts of the code assumed that get_ldev_if_state(device, D_ATTACHING) is sufficient to access the ldev member of the device object. That was wrong. ldev may not be there or might be freed at any time if the device has a disk state of D_ATTACHING. bm_rw() Documented that drbd_bm_read() is only called from drbd_adm_attach. drbd_bm_write() is only called when a reference is held, and it is documented that a caller has to hold a reference before calling drbd_bm_write() drbd_bm_write_page() Use get_ldev() instead of get_ldev_if_state(device, D_ATTACHING) drbd_bmio_set_n_write() No longer use get_ldev_if_state(device, D_ATTACHING). All callers hold a reference to ldev now. drbd_bmio_clear_n_write() All callers where holding a reference of ldev anyways. Remove the misleading get_ldev_if_state(device, D_ATTACHING) drbd_reconsider_max_bio_size() Removed the get_ldev_if_state(device, D_ATTACHING). All callers now pass a struct drbd_backing_dev* when they have a proper reference, or a NULL pointer. Before this fix, the receiver could trigger a NULL pointer deref when in drbd_reconsider_max_bio_size() drbd_bump_write_ordering() Used get_ldev_if_state(device, D_ATTACHING) with the wrong assumption. Remove it, and allow the caller to pass in a struct drbd_backing_dev* when the caller knows that accessing this bdev is safe. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e9526580 |
|
22-Nov-2013 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Move write_ordering from connection to resource Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2f632aeb |
|
28-Apr-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: prepare sending side for REQ_DISCARD Note that I do NOT call __drbd_chk_io_error for failed REQ_DISCARD. That may be wrong, though, or needs to differ between EOPNOTSUPP and other errors... Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
9e276872 |
|
28-Apr-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: allow parallel promote/demote actions We plan to use genl_family->parallel_ops = true in the future, but need to review all possible interactions first. For now, only selectively drop genl_lock() in drbd_set_role(), instead serializing on our own internal resource->conf_update mutex. We now can be promoted/demoted on many resources in parallel, which may significantly improve cluster failover times when fencing is required. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
a910b123 |
|
28-Apr-2014 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: perpare for genetlink parallel_ops Because all administrative requests via genetlink have been globally serialized via genl_lock(), we used to have one static struct drbd_config_context "admin context". Move this on-stack to the respective callback functions. This will allow us to selectively drop the genl_lock() (or use genl_family->parallel_ops) in the future. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
2457b6d5 |
|
21-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add drbd_thread->resource and make drbd_thread->connection optional In the drbd_thread "infrastructure" functions, only use the resource instead of the connection. Make the connection field of drbd_thread optional. This will allow to introduce threads which are not associated with a connection. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
b5043c5e |
|
28-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Turn conn_flush_workqueue() into drbd_flush_workqueue() The new function can flush any work queue, not just the work queue of the data socket of a connection. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
84b8c06b |
|
28-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Create a dedicated struct drbd_device_work drbd_device_work is a work item that has a reference to a device, while drbd_work is a more generic work item that does not carry a reference to a device. All callbacks get a pointer to a drbd_work instance, those callbacks that expect a drbd_device_work use the container_of macro to get it. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
c60b0251 |
|
10-Aug-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Kill drbd_task_to_thread_name() Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
69a22773 |
|
08-Aug-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Pass a peer device to a number of fuctions These functions actually operate on a peer device, or need a peer device. drbd_prepare_command(), drbd_send_command(), drbd_send_sync_param() drbd_send_uuids(), drbd_gen_and_send_sync_uuid(), drbd_send_sizes() drbd_send_state(), drbd_send_current_state(), and drbd_send_state_req() drbd_send_sr_reply(), drbd_send_ack(), drbd_send_drequest(), drbd_send_drequest_csum(), drbd_send_ov_request(), drbd_send_dblock() drbd_send_block(), drbd_send_out_of_sync(), recv_dless_read() drbd_drain_block(), receive_bitmap_plain(), recv_resync_read() read_in_block(), read_for_csum(), drbd_alloc_pages(), drbd_alloc_peer_req() need_peer_seq(), update_peer_seq(), wait_for_and_update_peer_seq() drbd_sync_handshake(), drbd_asb_recover_{0,1,2}p(), drbd_connected() drbd_disconnected(), decode_bitmap_c() and recv_bm_rle_bits() Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
79a3c8d3 |
|
08-Aug-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_csum_bio(), drbd_csum_ee(): Remove unused device argument Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
753c6191 |
|
22-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Function prototype cleanups Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
8fe60551 |
|
22-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename drbdd_init() -> drbd_receiver() Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
625a6ba2 |
|
22-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move cpu_mask from connection to resource Also fix drbd_calc_cpu_mask() to spread resources equally over all online cpus independent of device minor numbers. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
f44d0436 |
|
22-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Define the size of res_opts->cpu_mask in a single place Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
6bbf53ca |
|
07-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move susp, susp_nod, susp_fen from connection to resource Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
0500813f |
|
07-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move conf_mutex from connection to resource Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
b6f85ef9 |
|
06-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Iterate over all connections in drbd_adm_down(), drbd_create_device() and drbd_set_role() Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
59515a2e |
|
06-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_create_device(): Take a resource instead of a connection argument Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
f82795d6 |
|
03-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename drbd_{create,delete}_minor -> drbd_{create,delete}_device Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
0b0ba1ef |
|
27-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add explicit device parameter to D_ASSERT The implicit dependency on a variable inside the macro is problematic. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
1ec861eb |
|
06-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Replace and remove the obsolete conn_() macros With the polymorphic drbd_() macros, we no longer need the connection specific variants. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
d0180171 |
|
03-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove the terrible DEV hack DRBD was using dev_err() and similar all over the code; instead of having to write dev_err(disk_to_dev(device->vdisk), ...) to convert a drbd_device into a kernel device, a DEV macro was used which implicitly references the device variable. This is terrible; introduce separate drbd_err() and similar macros with an explicit device parameter instead. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
c06ece6b |
|
21-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Turn connection->volumes into connection->peer_devices Let connection->peer_devices point to peer devices; connection->volumes was pointing to devices. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
eb6bea67 |
|
21-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move resource options from connection to resource Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
4bc76048 |
|
13-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Replace conn_get_by_name() with drbd_find_resource() So far, connections and resources always come in pairs, but in the future with multiple connections per resource, the names will stick with the resources. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
803ea134 |
|
08-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add struct drbd_resource->devices This allows to access the volumes of a resource by number. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
93e4bf7a |
|
23-May-2013 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Minor cleanup in conn_new_minor() Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
d8628a86 |
|
08-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add struct drbd_device->resource Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
77c556f6 |
|
08-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add struct drbd_resource In a first step, each resource has exactly one connection, and both objects are allocated at the same time. The final result will be one resource and zero or more connections. Only allow to delete a resource if all its connections are C_STANDALONE. Stop the worker threads of all connections early enough. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
05a10ec7 |
|
07-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Improve some function and variable naming Rename functions conn_destroy() -> drbd_destroy_connection(), drbd_minor_destroy() -> drbd_destroy_device() drbd_adm_add_minor() -> drbd_adm_add_minor() drbd_adm_delete_minor() -> drbd_adm_del_minor() Rename global variable minors to drbd_devices Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
a6b32bc3 |
|
31-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Introduce "peer_device" object between "device" and "connection" In a setup where a device (aka volume) can replicate to multiple peers and one connection can be shared between multiple devices, we need separate objects to represent devices on peer nodes and network connections. As a first step to introduce multiple connections per device, give each drbd_device object a single drbd_peer_device object which connects it to a drbd_connection object. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
bde89a9e |
|
30-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename drbd_tconn -> drbd_connection sed -i -e 's:all_tconn:connections:g' -e 's:tconn:connection:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
b30ab791 |
|
03-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename "mdev" to "device" sed -i -e 's:mdev:device:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
54761697 |
|
30-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename struct drbd_conf -> struct drbd_device sed -i -e 's:\<drbd_conf\>:drbd_device:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
a3603a6e |
|
30-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Split off on-the-wire protocol definitions Keep the protocol definitions separate from the kernel code; they are useful in their own right. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
de0b2e69 |
|
19-Dec-2013 |
Rashika Kheria <rashika.kheria@gmail.com> |
drivers: block: Move prototype declaration to appropriate header file from drbd_main.c Move prototype declaration of functions drbdd_init() and drbd_asender() from drbd/drbd_main.c to header file drbd/drbd_int.h because these functions are used by more than one file. This eliminates the following warning in drbd/drbd_receiver.c: drivers/block/drbd/drbd_receiver.c:4836:5: warning: no previous prototype for ‘drbdd_init’ [-Wmissing-prototypes] drivers/block/drbd/drbd_receiver.c:5245:5: warning: no previous prototype for ‘drbd_asender’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
16f4e743 |
|
19-Dec-2013 |
Rashika Kheria <rashika.kheria@gmail.com> |
drivers: block: Mark functions as static in drbd_main.c Mark functions _drbd_send_uuids(), fill_bitmap_rle_bits() and init_submitter() as static in drbd/drbd_main.c because they are not used outside this file. This eliminates the following warnings in drbd/drbd_main.c: drivers/block/drbd/drbd_main.c:826:5: warning: no previous prototype for ‘_drbd_send_uuids’ [-Wmissing-prototypes] drivers/block/drbd/drbd_main.c:1070:5: warning: no previous prototype for ‘fill_bitmap_rle_bits’ [-Wmissing-prototypes] drivers/block/drbd/drbd_main.c:2592:5: warning: no previous prototype for ‘init_submitter’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
4550dd6c |
|
07-Aug-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Immutable bio vecs This adds a mechanism by which we can advance a bio by an arbitrary number of bytes without modifying the biovec: bio->bi_iter.bi_bvec_done indicates the number of bytes completed in the current bvec. Various driver code still needs to be updated to not refer to the bvec directly before we can use this for interesting things, like efficient bio splitting. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net
|
#
7988613b |
|
23-Nov-2013 |
Kent Overstreet <kmo@daterainc.com> |
block: Convert bio_for_each_segment() to bvec_iter More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: Geoff Levand <geoff@infradead.org>
|
#
69babf05 |
|
23-Oct-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix NULL pointer deref in module init error path If we want to iterate over the (as of yet still empty) list in the cleanup path, we need to initialize the list before the first goto fail. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
d752b269 |
|
25-Jun-2013 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Allow online change of al-stripes and al-stripe-size Allow to change the AL layout with an resize operation. For that the reisze command gets two new fields: al_stripes and al_stripe_size. In order to make the operation crash save: 1) Lock out all IO and MD-IO 2) Write the super block with MDF_PRIMARY_IND clear 3) write the bitmap to the new location (all zeros, since we allow only while connected) 4) Initialize the new AL-area 5) Write the super block with the restored MDF_PRIMARY_IND. 6) Unfreeze all IO Since the AL-layout has no influence on the protocol, this operation needs to be beforemed on both sides of a resource (if intended). Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
6110d70b |
|
25-Jun-2013 |
Wei Yongjun <yongjun_wei@trendmicro.com.cn> |
drbd: fix error return code in drbd_init() Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
db2a144b |
|
05-May-2013 |
Al Viro <viro@zeniv.linux.org.uk> |
block_device_operations->release() should return void The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
94ad0a10 |
|
27-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix memory leak We forgot to free the disk_conf, so for each attach/detach cycle we leaked 336 bytes. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
bb45185d |
|
27-Mar-2013 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: fix spurious warning about bitmap being locked from detach Introduced in drbd: always write bitmap on detach, the bitmap bulk writeout on detach was indicating it expected exclusive bitmap access. Where I meant to say: expect no more modifications, but testing/counting is still allowed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
113fef9e |
|
22-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: prepare to queue write requests on a submit worker Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
c04ccaa6 |
|
19-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: read meta data early, base on-disk offsets on super block We used to calculate all on-disk meta data offsets, and then compare the stored offsets, basically treating them as magic numbers. Now with the activity log striping, the activity log size is no longer fixed. We need to first read the super block, then base the activity log and bitmap offsets on the stored offsets/al stripe settings. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
cccac985 |
|
19-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: mechanically rename la_size to la_size_sect Make it obvious that this value is in units of 512 Byte sectors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
3a4d4eb3 |
|
19-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: prepare for new striped layout of activity log Introduce two new on-disk meta data fields: al_stripes and al_stripe_size_4k The intended use case is activity log on RAID 0 or similar. Logically consecutive transactions will advance their on-disk position by al_stripe_size_4k 4kB (transaction sized) blocks. Right now, these are still asserted to be the backward compatible values al_stripes = 1, al_stripe_size_4k = 8 (which amounts to 32kB). Also introduce a caching member for meta_dev_idx in the in-core structure: even though it is initially passed in in the rcu-protected disk_conf structure, it cannot change without a detach/attach cycle. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
ae8bf312 |
|
19-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: cleanup ondisk meta data layout calculations and defines Add a comment about our meta data layout variants, and rename a few defines (e.g. MD_RESERVED_SECT -> MD_128MB_SECT) to make it clear that they are short hand for fixed constants, and not arbitrarily to be redefined as one may see fit. Properly pad struct meta_data_on_disk to 4kB, and initialize to zero not only the first 512 Byte, but all of it in drbd_md_sync(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9114d795 |
|
19-Mar-2013 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: cleanup bogus assert message This fixes ASSERT( mdev->state.disk == D_FAILED ) in drivers/block/drbd/drbd_main.c When we detach from local disk, we let the local refcount hit zero twice. First, we transition to D_FAILED, so we won't give out new references to incoming requests; we still may give out *internal* references, though. Once the refcount hits zero [1] while in D_FAILED, we queue a transition to D_DISKLESS to our worker. We need to queue it, because we may be in atomic context when putting the reference. Once the transition to D_DISKLESS actually happened [2] from worker context, we don't give out new internal references either. Between hitting zero the first time [1] and actually transition to D_DISKLESS [2], there may be a few very short lived internal get/put, so we may hit zero more than once while being in D_FAILED, or even see a race where a an internal get_ldev() happened while D_FAILED, but the corresponding put_ldev() happens just after the transition to D_DISKLESS. That's why we have the additional test_and_set_bit(GO_DISKLESS,); and that's why the assert was placed wrong. Since there was exactly one code path left to drbd_go_diskless(), and that checks already for D_FAILED, drop that assert, and fold in the drbd_queue_work(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
56de2102 |
|
27-Feb-2013 |
Tejun Heo <tj@kernel.org> |
drbd: convert to idr_alloc() Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
298307ed |
|
15-Nov-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Remove obsolete check Smatch complained about it this redundanct check. The check was introduced in 2006-09-13. On 2007-07-24 the body of the function was enclosed by get_ldev()/put_ldev() reference counting. Since then the check is useless and miss leading. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fd0017c1 |
|
19-Oct-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: fix regression: potential NULL pointer dereference recent commit drbd: always write bitmap on detach introduced a bitmap writeout during detach, which obviously needs some meta data device to write to. Unfortunately, that same error path may be taken if we fail to attach, e.g. due to UUID mismatch, after we changed state to D_ATTACHING, but before the lower level device pointer is even assigned. We need to test for presence of mdev->ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
edc9f5eb |
|
27-Sep-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: always write bitmap on detach If we detach due to local read-error (which sets a bit in the bitmap), stay Primary, and then re-attach (which re-reads the bitmap from disk), we potentially lost the "out-of-sync" (or, "bad block") information in the bitmap. Always (try to) write out the changed bitmap pages before going diskless. That way, we don't lose the bit for the bad block, the next resync will fetch it from the peer, and rewrite it locally, which may result in block reallocation in some lower layer (or the hardware), and thereby "heal" the bad blocks. If the bitmap writeout errors out as well, we will (again: try to) mark the "we need a full sync" bit in our super block, if it was a READ error; writes are covered by the activity log already. If that superblock does not make it to disk either, we are sorry. Maybe we just lost an entire disk or controller (or iSCSI connection), and there actually are no bad blocks at all, so we don't need to re-fetch from the peer, there is no "auto-healing" necessary. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
19fffd7b |
|
28-Aug-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Call drbd_md_sync() explicitly after a state change on the connection Without this, the meta-data gets updates after 5 seconds by the md_sync_timer. Better to do it immeditaly after a state change. If the asender detects a network failure, it may take a bit until the worker processes the according after-conn-state-change work item. The worker might be blocked in sending something, i.e. it takes until it gets into its timeout. That is 6 seconds by default which is longer than the 5 seconds of the md_sync_timer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b792b655 |
|
22-Aug-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential list_add corruption If the md_sync_timer triggers a second time, while the work queued during the first time is still pending, this could result in list_add() of an already added item, and corrupt the work item list. This likely only triggered because of the erroneous batch-dequeueing of work items fixed with drbd: dequeue single work items in wait_for_work() Still, skip queueing if md_sync_work is already queued. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
39a1aa7f |
|
08-Aug-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Protect accesses to the uuid set with a spinlock There is at least the worker context, the receiver context, the context of receiving netlink packts. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d4dabbe2 |
|
31-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: disambiguation, s/P_DISCARD_WRITE/P_SUPERSEDED/ To avoid confusion with REQ_DISCARD aka TRIM, rename our "discard concurrent write acks" from P_DISCARD_WRITE to P_SUPERSEDED. At the same time, rename the drbd request event DISCARD_WRITE to CONFLICT_RESOLVED. It already triggers both successful completion or restart of the request, depending on our RQ_POSTPONED flag. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
81a3537a |
|
30-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: announce FLUSH/FUA capability to upper layers In 8.4, we may have bios spanning two activity log extents. Fixup drbd_al_begin_io() and drbd_al_complete_io() to deal with zero sized bios. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6f3465ed |
|
30-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: report congestion if we are waiting for some userland callback If the drbd worker thread is synchronously waiting for some userland callback, we don't want some casual pageout to block on us. Have drbd_congested() report congestion in that case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0c849666 |
|
30-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: differentiate between normal and forced detach Aborting local requests (not waiting for completion from the lower level disk) is dangerous: if the master bio has been completed to upper layers, data pages may be re-used for other things already. If local IO is still pending and later completes, this may cause crashes or corrupt unrelated data. Only abort local IO if explicitly requested. Intended use case is a lower level device that turned into a tarpit, not completing io requests, not even doing error completion. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9a278a79 |
|
24-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: allow read requests to be retried after force-detach Sometimes, a lower level block device turns into a tar-pit, not completing requests at all, not even doing error completion. We can force-detach from such a tar-pit block device, either by disk-timeout, or by drbdadm detach --force. Queueing for retry only from the request destruction path (kref hit 0) makes it impossible to retry affected read requests from the peer, until the local IO completion happened, as the locally submitted bio holds a reference on the drbd request object. If we can only complete READs when the local completion finally happens, we would not need to force-detach in the first place. Instead, queue for retry where we otherwise had done the error completion. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a0d856df |
|
24-Jan-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: base completion and destruction of requests on ref counts cherry-picked and adapted from drbd 9 devel branch The logic for when to get or put a reference is in mod_rq_state(). To not get confused in the freeze/thaw respectively resend/restart paths, or when cleaning up requests waiting for P_BARRIER_ACK, this also introduces additional state flags: RQ_COMPLETION_SUSP, and RQ_EXP_BARR_ACK. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5df69ece |
|
24-Jan-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: __drbd_make_request() is now void The previous commit causes __drbd_make_request() to always return 0. Change it to void. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b6dd1a89 |
|
28-Nov-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove struct drbd_tl_epoch objects (barrier works) cherry-picked and adapted from drbd 9 devel branch DRBD requests (struct drbd_request) are already on the per resource transfer log list, and carry their epoch number. We do not need to additionally link them on other ring lists in other structs. The drbd sender thread can recognize itself when to send a P_BARRIER, by tracking the currently processed epoch, and how many writes have been processed for that epoch. If the epoch of the request to be processed does not match the currently processed epoch, any writes have been processed in it, a P_BARRIER for this last processed epoch is send out first. The new epoch then becomes the currently processed epoch. To not get stuck in drbd_al_begin_io() waiting for P_BARRIER_ACK, the sender thread also needs to handle the case when the current epoch was closed already, but no new requests are queued yet, and send out P_BARRIER as soon as possible. This is done by comparing the per resource "current transfer log epoch" (tconn->current_tle_nr) with the per connection "currently processed epoch number" (tconn->send.current_epoch_nr), while waiting for new requests to be processed in wait_for_work(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d5b27b01 |
|
14-Nov-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: move the drbd_work_queue from drbd_socket to drbd_connection cherry-picked and adapted from drbd 9 devel branch In 8.4, we don't distinguish between "resource work" and "connection work" yet, we have one worker for both, as we still have only one connection. We only ever used the "data.work", no need to keep the "meta.work" around. Move tconn->data.work to tconn->sender_work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8c0785a5 |
|
19-Oct-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: allow to dequeue batches of work at a time cherry-picked and adapted from drbd 9 devel branch In 8.4, we still use drbd_queue_work_front(), so in normal operation, we can not dequeue batches, but only single items. Still, followup commits will wake the worker without explicitly queueing a work item, so up() is replaced by a simple wake_up(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b379c41e |
|
17-Nov-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: transfer log epoch numbers are now per resource cherry-picked from drbd 9 devel branch. In preparation of multiple connections, the "barrier number" or "epoch number" needs to be tracked per-resource, not per connection. The sequence number space will not be reset anymore. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9d05e7c4 |
|
17-Jul-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: rename drbd_restart_write to drbd_restart_request Meanwhile, this is used to restart failed READ requests as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c5b005ab |
|
29-Apr-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: use bitmap_parse instead of __bitmap_parse The buffer 'sc.cpu_mask' is a kernel buffer. If bitmap_parse is used instead of __bitmap_parse the extra parameter that indicates a kernel buffer is not needed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9ed57dcb |
|
26-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: ignore volume number for drbd barrier packet exchange Transfer log epochs, and therefore P_BARRIER packets, are per resource, not per volume. We must not associate them with "some random volume". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2312f0b3 |
|
24-Nov-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential deadlock during "restart" of conflicting writes w_restart_write(), run from worker context, calls __drbd_make_request() and further drbd_al_begin_io(, delegate=true), which then potentially deadlocks. The previous patch moved a BUG_ON to expose such call paths, which would now be triggered. Also, if we call __drbd_make_request() from resource worker context, like w_restart_write() did, and that should block for whatever reason (!drbd_state_is_stable(), resource suspended, ...), we potentially deadlock the whole resource, as the worker is needed for state changes and other things. Create a dedicated retry workqueue for this instead. Also make sure that inc_ap_bio()/dec_ap_bio() are properly paired, even if do_retry() needs to retry itself, in case __drbd_make_request() returns != 0. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f9916d61 |
|
26-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't pretend that barrier_nr == 0 was special Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5cdb0bf3 |
|
26-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove now unused seq_num member from struct drbd_request Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4b8514ee |
|
26-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential data corruption and protocol error Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b17f33cb |
|
08-Feb-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: explicitly clear unused dp_flags in drbd_send_block We send left-over garbage from the previous packet in P_DATA_REPLY and P_RS_DATA_REPLY packets. That's bad behaviour. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
12038a3a |
|
09-Nov-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Move list of epochs from mdev to tconn This is necessary since the transfer_log on the sending is also per tconn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4b0007c0 |
|
09-Nov-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Move write_ordering from mdev to tconn This is necessary in order to prepare the move of the (receiver side) epoch list from the device (mdev) to the connection (tconn) objects. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6936fcb4 |
|
10-Nov-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Move the CREATE_BARRIER flag from connection to device That is necessary since the whole transfer log is per connection(tconn) and not per device(mdev). This bug caused list corruption on the worker list. When a barrier is queued for sending in the context of one device, another device did not see the CREATE_BARRIER bit, and queued the same object again -> list corruption. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
43de7c85 |
|
10-Nov-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixes from the drbd-8.3 branch * drbd-8.3: drbd: O_SYNC gives EIO on ramdisks for some kernels (eg. RHEL6). drbd: send intermediate state change results to the peer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0cfac5dd |
|
09-Nov-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixes from the drbd-8.3 branch * drbd-8.3: drbd: fix spurious meta data IO "error" drbd: Fixed a race condition between detach and start of resync drbd: fix harmless race to not trigger an ASSERT drbd: Derive sync-UUIDs only from the bitmap-uuid if it is non-zero drbd: Fixed current UUID generation (regression introduced recently, after 8.3.11) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
97ddb687 |
|
15-Jul-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: detach must not try to abort non-local requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f497609e |
|
17-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Get rid of MR_{READ,WRITE}_SHIFT Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7d4c782c |
|
17-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Fix the data-integrity-alg setting The last data-integrity-alg fix made data integrity checking work when the algorithm was changed for an established connection, but the common case of configuring the algorithm before connecting was still broken. Fix that. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
71fc7eed |
|
17-Jul-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Turn tl_apply() into tl_abort_disk_io() There is no need to overly generalize this function; it only makes the code harder to understand. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d5d7ebd4 |
|
05-Jul-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: on attach, enforce clean meta data Detection of unclean shutdown has moved into user space. The kernel code will, whenever it updates the meta data, mark it as "unclean", and will refuse to attach to such unclean meta data. "drbdadm up" now schedules "drbdmeta apply-al", which will apply the activity log to the bitmap, and/or reinitialize it, if necessary, as well as set a "clean" indicator flag. This moves a bit code out of kernel space. As a side effect, it also prevents some 8.3 module from accidentally ignoring the 8.4 style activity log, if someone should downgrade, whether on purpose, or accidentally because he changed kernel versions without providing an 8.4 for the new kernel, and the new kernel comes with in-tree 8.3. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cdfda633 |
|
05-Jul-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: detach from frozen backing device * drbd-8.3: documentation: Documented detach's --force and disk's --disk-timeout drbd: Implemented the disk-timeout option drbd: Force flag for the detach operation drbd: Allow new IOs while the local disk in in FAILED state drbd: Bitmap IO functions can not return prematurely if the disk breaks drbd: Added a kref to bm_aio_ctx drbd: Hold a reference to ldev while doing meta-data IO drbd: Keep a reference to the bio until the completion handler finished drbd: Implemented wait_until_done_or_disk_failure() drbd: Replaced md_io_mutex by an atomic: md_io_in_use drbd: moved md_io into mdev drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk drbd: Keep a reference to barrier acked requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2ffca4f3 |
|
30-Jun-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Improve compatibility with drbd's older than 8.3.7 Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6dff2902 |
|
28-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename --dry-run to --tentative drbdadm already has a --dry-run option, so this option cannot directly be passed through to drbdsetup. Rename the drbdsetup option to resolve this conflict. For backward compatibility, make --dry-run an alias of --tentative. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
afbbfa88 |
|
16-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Allow to pass resource options to the new-resource command This is equivalent to how the attach and connect commands work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
089c075d |
|
14-Jun-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Convert the generic netlink interface to accept connection endpoints Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
46530e85 |
|
31-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Use DRBD_MINOR_COUNT_DEF in one more place Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d659f2aa |
|
16-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Send PROTOCOL_UPDATE packets when appropriate Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
036b17ea |
|
16-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Receiving part for the PROTOCOL_UPDATE packet Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
46e1ce41 |
|
15-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: protect updates to integrits_tfm by tconn->data->mutex Since we need to hold that mutex anyways to make sure the peer gets that change in the right position in the data stream, it makes a lot of sense to use the same mutex to ensure existence of the tfm. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6394b935 |
|
11-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Refer to resync-rate consistently throughout the code Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6139f60d |
|
06-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename the want_lose field/flag to discard_my_data This is what it is called in config files and on the command line as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c141ebda |
|
05-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Removing drbd_cfg_rwsem * Updates to all configuration items is done under genl_lock(). Including removal of mdevs or tconns. * All read non sleeping read sides are protected by rcu * All sleeping read sides keep reference counts to keep the objects alive Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ec0bddbc |
|
04-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Use RCU for the drbd_tconns list Preparing removal of drbd_cfg_rwsem Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
81fa2e67 |
|
04-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Refcounting for mdev objects Preparing removal of drbd_cfg_rwsem Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9958c857 |
|
03-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Made the fifo object a self contained object (preparing for RCU) * Moved rs_planed into it, named total * When having a pointer to the object the values can be embedded into the fifo object. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
daeda1cc |
|
03-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a0095508 |
|
03-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Renamed the net_conf_update mutex to conf_update Preparing to use the same mutex for disk_conf updates Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b966b5dd |
|
03-May-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.h Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
992d6e91 |
|
02-May-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix thread stop deadlock There are races where the receiver may be exiting, but still need the worker to process some stuff. Do not wait for the receiver to die from an exiting worker. The receiver must already be dead in case the worker decides to exit. If the receiver was still alive, it may still want to queue work, and do drbd_flush_workqueue() from it's disconnect cleanup code, which would no longer be processed by an exiting worker. This also would deadlock, if the worker was to synchornously wait for the receiver to die. Do not implicitly stop the worker. The worker will only be stopped from configuration context, from conn_reconfig_done(), drbd_adm_down() or drbd_adm_delete_connection(), after making sure the receiver is already stopped. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
88104ca4 |
|
28-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Allow to change data-integrity-alg on the fly The main purpose of this is to allow to turn data integrity checking on and off on demand without causing interruptions. Implemented by allocating tconn->peer_integrity_tfm only when receiving a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in worker context, and no further synchronization is necessary. On the sender side, tconn->integrity_tfm is modified under tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All accesses to tconn->integrity_tfm already happen under this mutex. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a7eb7bdf |
|
29-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Introduce a "lockless" variant of drbd_send_protocoll() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5b614abe |
|
27-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename integrity_r_tfm -> peer_integrity_tfm Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8d412fc6 |
|
27-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename integrity_w_tfm -> integrity_tfm Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5979e361 |
|
27-Apr-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: on reconfiguration requests, mind the SET_DEFAULTS flag The DRBD_GENL_F_SET_DEFAULTS flag was ignored for drbd_adm_disk_opts() and drbd_adm_net_opts(). Factor out drbd_set_*_defaults() helper functions, and call them appropriately. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0ace9dfa |
|
24-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Take a reference on tconn when finding a tconn by name Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9dc9fbb3 |
|
22-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Basic refcounting for drbd_tconn References hold by: * Each (running) drbd thread has a reference on tconn * Each mdev has a referenc on tconn * Beeing in the all_tconn list counts for one reference * Each after_conn_state_chg_work has a reference to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1d041225 |
|
22-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Eliminated drbd_free_resoruces() it is superseeded by conn_free_crypto() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ae25b336 |
|
23-Apr-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: cmdname() enum to string convertion was missing a few constants Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
91fd4dad |
|
20-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Proper locking for updates to net_conf under RCU Removing the get_net_conf()/put_net_conf() functions Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
44ed167d |
|
19-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf Removing the get_net_conf()/put_net_conf() calls Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
303d1448 |
|
13-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Runtime changeable wire protocol The wire protocol is no longer a property that is negotiated between the two peers. It is now expressed with two bits (DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data packet. Therefore the primary node is free to change the wire protocol at any time without disconnect/reconnect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d3fcb490 |
|
13-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: protect all idr accesses that might sleep with drbd_cfg_rwsem With this commit the locking for all accesses to IDRs is complete: * Non sleeping read accesses are protected by RCU * sleeping read accesses are protocted by a read lock on drbd_cfg_rwsem * accesses that add anything are protected by a write lock * accesses that remove an object are protoected by a write lock and a call to synchronize_rcu() after it is removed from the IDR and before the object is actually free()ed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ef356262 |
|
13-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_cfg_mutex into drbd_cfg_rwsem Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
695d08fa |
|
11-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: rcu_read_[un]lock() for all idr accesses that do not sleep Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cd1d9950 |
|
11-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Inlined drbd_free_mdev(); it got called only from one place Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ff370e5a |
|
11-Apr-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: drbd_delete_device() takes a struct drbd_conf * now Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7721f567 |
|
06-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename drbd_release_ee() to drbd_free_peer_reqs() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e0ab6ad4 |
|
06-Apr-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_init_ee() no longer exists Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b55d84ba |
|
22-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Removed outdated comments and code that envisioned VNRs in header 95 Since have now header 100, that has space for 16 bit volume numbers, the high byte of the length in header 95 is no longer reserved for 8 bit volume numbers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0c8e36d9 |
|
30-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Introduce protocol version 100 headers The 8 byte header finally becomes too small. With the protocol 100 header we have 16 bit for the volume number, proper 32 bit for the data length, and 32 bit for further extensions in the future. Previous versions of drbd are using version 80 headers for all packets short enough for protocol 80. They support both header versions in worker context, but only version 80 headers in asynchronous context. For backwards compatibility, continue to use version 80 headers for short packets before protocol version 100. From protocol version 100 on, use the same header version for all packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e658983a |
|
29-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove headers from on-the-wire data structures (struct p_*) Prepare the introduction of the protocol 100 headers. The actual protocol header is removed for the packet declarations. I.e. allow us to use the packets with different headers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
50d0b1ad |
|
30-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove some fixed header size assumptions Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
da39fec4 |
|
30-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove now-unused int_dig_out buffer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9f5bdc33 |
|
28-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Replace and remove old primitives Centralize sock->mutex locking and unlocking in [drbd|conn]_prepare_command() and [drbd|conn]_send_comman(). Therefore all *_send_* functions are touched to use these primitives instead of drbd_get_data_sock()/drbd_put_data_sock() and former helper functions. That change makes the *_send_* functions more standardized. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
52b061a4 |
|
30-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Introduce drbd_header_size() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
dba58587 |
|
29-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Introduce new primitives for sending commands Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a17647aa |
|
31-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_ping(), drbd_send_ping(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
da9fbc27 |
|
29-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Introduced a new type union drbd_dev_state Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6038178e |
|
28-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Change how the "handshake" packets are called Packets of type P_HAND_SHAKE define which protocol versions and features a node supports. For clarity, call those packets P_CONNECTION_FEATURES instead. (This does not determine the features that a specific drbd device supports, such as drbd protocol A, B, C.) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e5d6f33a |
|
28-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Change how the initial packets are called The first packets exchanged when a connection is established are referred to as P_HAND_SHAKE_S and P_HAND_SHAKE_M in the code, followed by P_HAND_SHAKE packets. To avoid confusion between these two unrelated things, call the initial packets P_INITIAL_DATA and P_INITIAL_META. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7c96715a |
|
21-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _conn_send_cmd(), _drbd_send_cmd(): Pass a struct drbd_socket instead of a plain socket Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
79ed9bd0 |
|
24-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_bitmap(): Use the pre-allocated send buffer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5a87d920 |
|
24-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Preallocate one page per drbd_socket as a send buffer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e6ef8a5c |
|
24-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Preallocate one page per drbd_socket as a receive buffer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a02d1240 |
|
22-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename the DCBP_* functions to dcbp_* and move them to where they are used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
058820cd |
|
22-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Make _drbd_send_bitmap() static Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e307f352 |
|
22-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move drbd_send_ping() and drbd_send_ping_ack() to drbd_main.c Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0916e0e3 |
|
21-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Always use the same protocol version for the same peer There is no need to send protocol 80 headers to peers that understand protocol 95 headers. Make sure that we don't send protocol 95 headers until we have agreed upon a protocol version with our peer, though. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8f7bed77 |
|
19-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename various functions from *_oos_* to *_out_of_sync_* for clarity Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3fbf4d21 |
|
12-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_md_sync_page_io(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a982dd57 |
|
09-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: send_bitmap_rle_or_plain(): Error handling cleanup Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
99920dc5 |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Make all worker callbacks return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b2f0ab62 |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Temporarily change the return type of all worker callbacks This helps to ensure that we don't miss one of them when changing their return value semantics. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6bdb9b0e |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_dblock(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7fae55da |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_bio(), _drbd_send_zc_bio(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7b57b89d |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_block(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9f69230c |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_zc_ee(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
88b390ff |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_page(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b987427b |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_no_send_page(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
73218a3c |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_oos(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
db1b0b72 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_drequest_csum(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6c1005e7 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_drequest(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5b9f499c |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_ov_request(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fa79abd8 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_ack_ex(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a9a9994d |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_ack_{dp,rp}(): Return void: the result is never used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
dd516121 |
|
16-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_ack(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a8c32aa8 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_ack(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d4e67d7c |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_b_ack(): Return void: the result is never used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2f4e7abe |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_sr_reply(): Return void: the result is never used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
758970c8 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _conn_send_state_req(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f02d4d0a |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_sizes(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9c1b7f72 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_gen_and_send_sync_uuid(): Return void: the result is never used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2ae5f95b |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_uuids() and its variants: Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
387eb308 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_protocol(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
927036f9 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_state(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
103ea275 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_sync_param(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f7254463 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send_cmd(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7d168ed3 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Get rid of USE_DATA_SOCKET and USE_META_SOCKET Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
596a37f9 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: conn_send_cmd(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
04dfa137 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _drbd_send_cmd(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ecf2363c |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _conn_send_cmd(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ce9879cb |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: conn_send_cmd2(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fb708e40 |
|
15-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add drbd_send_all(): Send an entire buffer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
11b0be28 |
|
15-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_get_data_sock(): Return 0 upon success and an error code otherwise Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c0d42c8e |
|
09-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: drbd_send(): Return a "real" error code if we have no socket Q: Can this case even trigger? Is failing this way any better than one that causes a NULL pointer access? Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e90285e0 |
|
21-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed conn_lowest_minor It actually returned the lowest volume number. While doing that renamed a few wrongly named variables. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f399002e |
|
23-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: distribute former syncer_conf settings to disk, connection, and resource level This commit breaks the API again. Move per-volume former syncer options into disk_conf. Move per-connection former syncer options into net_conf. Renamed the remainign sync_conf to res_opts Syncer settings have been changeable at runtime, so we need to prepare for these settings to be runtime-changeable in their new home as well. Introduce new configuration operations, and share the netlink attribute between "attach" (create new disk) and "disk-opts" (change options). Same for "connect" and "net-opts". Some fields cannot be changed at runtime, however. Introduce a new flag GENLA_F_INVARIANT to be able to trigger on that in the generated validation and assignment functions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2325eb66 |
|
15-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: New minors have to intherit the connection state form their connection Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
85f75dd7 |
|
15-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce in-kernel "down" command This greatly simplifies deconfiguration of whole resources. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
543cc10b |
|
10-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: drbd_adm_get_status needs to show some more detail We want to see existing connection objects, even if they do not currently have volumes attached. Change the .dumpit variant of drbd_adm_get_status to iterate not over minor devices, but over connections + volumes. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8432b314 |
|
08-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: allow holes in minor and volume id allocation s/idr_get_new/idr_get_new_above/ Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3b98c0c2 |
|
06-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: switch configuration interface from connector to genetlink Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a2a3c74f |
|
21-Sep-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: always write bitmap on detach If we detach due to local read-error (which sets a bit in the bitmap), stay Primary, and then re-attach (which re-reads the bitmap from disk), we potentially lost the "out-of-sync" (or, "bad block") information in the bitmap. Always (try to) write out the changed bitmap pages before going diskless. That way, we don't lose the bit for the bad block, the next resync will fetch it from the peer, and rewrite it locally, which may result in block reallocation in some lower layer (or the hardware), and thereby "heal" the bad blocks. If the bitmap writeout errors out as well, we will (again: try to) mark the "we need a full sync" bit in our super block, if it was a READ error; writes are covered by the activity log already. If that superblock does not make it to disk either, we are sorry. Maybe we just lost an entire disk or controller (or iSCSI connection), and there actually are no bad blocks at all, so we don't need to re-fetch from the peer, there is no "auto-healing" necessary. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
06f10adb |
|
22-Sep-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: prepare for more than 32 bit flags - struct drbd_conf { ... unsigned long flags; ... } + struct drbd_conf { ... unsigned long drbd_flags[N]; ... } And introduce wrapper functions for test/set/clear bit operations on this member. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
599377ac |
|
17-Aug-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Avoid NetworkFailure state during disconnect Disconnecting is a cluster wide state change. In case the peer node agrees to the state transition, it sends back the fact on the meta-data connection and closes both sockets. In case the node node that initiated the state transfer sees the closing action on the data-socket, before the P_STATE_CHG_REPLY packet, it was going into one of the network failure states. At least with the fencing option set to something else thatn "dont-care", the unclean shutdown of the connection causes a short IO freeze or a fence operation. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
02b91b55 |
|
28-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce stop-sector to online verify We now can schedule only a specific range of sectors for online verify, or interrupt a running verify without interrupting the connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
9f2247bb |
|
16-Aug-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Protect accesses to the uuid set with a spinlock There is at least the worker context, the receiver context, the context of receiving netlink packts and processes reading a sysfs attribute that access the uuids. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
395c72a7 |
|
06-Sep-2012 |
Kent Overstreet <koverstreet@google.com> |
block: Generalized bio pool freeing With the old code, when you allocate a bio from a bio pool you have to implement your own destructor that knows how to find the bio pool the bio was originally allocated from. This adds a new field to struct bio (bi_pool) and changes bio_alloc_bioset() to use it. This makes various bio destructors unnecessary, so they're then deleted. v6: Explain the temporary if statement in bio_put Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: NeilBrown <neilb@suse.de> CC: Alasdair Kergon <agk@redhat.com> CC: Nicholas Bellinger <nab@linux-iscsi.org> CC: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
#
509fc019 |
|
31-Jul-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Finish requests that completed while IO was frozen Requests of an acked epoch are stored on the barrier_acked_requests list. In case the private bio of such a request completes while IO on the drbd device is suspended [req_mod(completed_ok)] then the request stays there. When thawing IO because the fence_peer handler returned, then we use tl_clear() to apply the connection_lost_while_pending event to all requests on the transfer-log and the barrier_acked_requests list. Up to now the connection_lost_while_pending event was not applied on requests on the barrier_acked_requests list. Fixed that. I.e. now the connection_lost_while_pending and resend events are applied to requests on the barrier_acked_requests list. For that it is necessary that the resend event finishes (local only) READS correctly. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d97482ed |
|
25-Jul-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
drbd: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from drbd comments. Cc: drbd-dev@lists.linbit.com Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
a73ff323 |
|
25-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: announce FLUSH/FUA capability to upper layers Unconditionally announce FLUSH/FUA to upper layers. If the lower layers on either node do not actually support this, generic_make_request() will deal with it. If this causes performance regressions on your setup, make sure there are no volatile caches involved, and mount -o nobarrier or equivalent. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
db141b2f |
|
25-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix max_bio_size to be unsigned We capped our max_bio_size respectively max_hw_sectors with min_t(int, lower level limit, our limit); unfortunately, some drivers, e.g. the kvm virtio block driver, initialize their limits to "-1U", and that is of course a smaller "int" value than our limit. Impact: we started to request 16 MB resync requests, which lead to protocol error and a reconnect loop. Fix all relevant constants and parameters to be unsigned int. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
63a6d0bb |
|
18-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: call local-io-error handler early In case we want to hard-reset from the local-io-error handler, we need to call it before notifying the peer or aborting local IO. Otherwise the peer will advance its data generation UUIDs even if secondary. This way, local io error looks like a "regular" node crash, which reduces the number of different failure cases. This may be useful in a bigger picture where crashed or otherwise "misbehaving" nodes are automatically re-deployed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0029d624 |
|
14-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: do not reset rs_pending_cnt too early Fix asserts like block drbd0: in got_BlockAck:4634: rs_pending_cnt = -35 < 0 ! We reset the resync lru cache and related information (rs_pending_cnt), once we successfully finished a resync or online verify, or if the replication connection is lost. We also need to reset it if a resync or online verify is aborted because a lower level disk failed. In that case the replication link is still established, and we may still have packets queued in the network buffers which want to touch rs_pending_cnt. We do not have any synchronization mechanism to know for sure when all such pending resync related packets have been drained. To avoid this counter to go negative (and violate the ASSERT that it will always be >= 0), just do not reset it when we lose a disk. It is good enough to make sure it is re-initialized before the next resync can start: reset it when we re-attach a disk. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c2ba686f |
|
14-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: report congestion if we are waiting for some userland callback If the drbd worker thread is synchronously waiting for some userland callback, we don't want some casual pageout to block on us. Have drbd_congested() report congestion in that case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
383606e0 |
|
14-Jun-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: differentiate between normal and forced detach Aborting local requests (not waiting for completion from the lower level disk) is dangerous: if the master bio has been completed to upper layers, data pages may be re-used for other things already. If local IO is still pending and later completes, this may cause crashes or corrupt unrelated data. Only abort local IO if explicitly requested. Intended use case is a lower level device that turned into a tarpit, not completing io requests, not even doing error completion. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bc4854bc |
|
03-Apr-2012 |
Cong Wang <xiyou.wangcong@gmail.com> |
drbd: check MODULE for THIS_MODULE THIS_MODULE is NULL only when drbd is compiled as built-in, so the #ifdef CONFIG_MODULES should be #ifdef MODULE instead. This fixes the warning: drivers/block/drbd/drbd_main.c: In function ‘drbd_buildtag’: drivers/block/drbd/drbd_main.c:4187:24: warning: the comparison will always evaluate as ‘true’ for the address of ‘__this_module’ will never be NULL [-Waddress] Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9476f39d |
|
23-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce a bio_set to allocate housekeeping bios from Don't rely on availability of bios from the global fs_bio_set, we should use our own bio_set for meta data IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3c2f7a85 |
|
23-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove unused define Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4281808f |
|
22-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: add page pool to be used for meta data IO Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0e8488ad |
|
25-Apr-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: allow bitmap to change during writeout from resync_finished Symptom: messages similar to "FIXME asender in bm_change_bits_to, bitmap locked for 'write from resync_finished' by worker" If a resync or verify is finished (or aborted), a full bitmap writeout is triggered. If we have ongoing local IO, the bitmap may still change during that writeout, pending and not yet processed acks may cause bits to be cleared, while new writes may cause bits to be to be set. To fix this, introduce the drbd_bm_write_copy_pages() variant. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ba280c09 |
|
25-Apr-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix resend/resubmit of frozen IO DRBD can freeze IO, due to fencing policy (fencing resource-and-stonith), or because we lost access to data (on-no-data-accessible suspend-io). Resuming from there (re-connect, or re-attach, or explicit admin intervention) should "just work". Unfortunately, if the re-attach/re-connect did not happen within the timeout, since the commit drbd: Implemented real timeout checking for request processing time if so configured, the request_timer_fn() would timeout and detach/disconnect virtually immediately. This change tracks the most recent attach and connect, and does not timeout within <configured timeout interval> after attach/connect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
197296ff |
|
26-Mar-2012 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Delay/reject other state changes while establishing a connection Changes to the role and disk state should be delayed or rejected while we establish a connection. This is necessary, since the peer will base its resync decision on the UUIDs and the state we sent in the drbd_connect() function. The most prominent example for this race is becoming primary after sending state and UUIDs and before the state changes to C_WF_CONNECTION. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c088b2d9 |
|
23-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't pretend that barrier_nr == 0 was special We used to have a barrier implementation where barrier_nr 0 was reserved. That is long gone. Just use the full sequence space. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
671a74e7 |
|
08-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove now unused seq_num member from struct drbd_request Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
001a8868 |
|
08-Mar-2012 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential data corruption and protocol error We assumed only bios with bi_idx == 0 would end up in drbd_make_request(). That is wrong. At least device mapper, in __clone_and_map(), may submit clones only covering a partial bio, but sharing the original bvec, by adjusting bi_idx and relevant other bio members of the clone. We used __bio_for_each_segment() in various places, even though that is documented as * drivers should not use the __ version unless they _really_ want to * run through the entire bio and not just pending pieces Impact: we would send the full bio bvec, even for the clone with bi_idx > 0, which will cause data corruption on the peer (because we submit wrong data at the clone offset), and will cause a DRBD protocol error, disconnect/reconnect and resync (thus fixing the corruption), because the next package header would be expected right in the middle of the sent data, causing DRBD magic mismatch. Fix: drop the assert, and use bio_for_each_segment() instead of the __ version. Conflicts: drbd/drbd_tracing.c Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7caacb69 |
|
14-Dec-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Consider the disk-timeout also for meta-data IO operations If the backing device is already frozen during attach, we failed to recognize that. The current disk-timeout code works on top of the drbd_request objects. During attach we do not allow IO and therefore never generate a drbd_request object but block before that in drbd_make_request(). This patch adds the timeout to all drbd_md_sync_page_io(). Before this patch we used to go from D_ATTACHING directly to D_DISKLESS if IO failed during attach. We can no longer do this since we have to stay in D_FAILED until all IO ops issued to the backing device returned. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4afc433c |
|
13-Dec-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not send state packets while lower than C_CONNECTED cstate I.e. in C_WF_REPORT_PARAMS or in C_WF_CONNECTION. Sending may already work in these cstates, but the peer still expects the HandShake / ConnectionFeatures packet. Actually triggered by the Testuite on kugel. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
545752d5 |
|
05-Dec-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix race between disconnect and receive_state If the asender thread, or request_timer_fn(), or some other part of the code, decided to drop the connection (because of timeout or other), but the receiver just now was processing a P_STATE packet, there was a chance that receive_state() would do a hard state change "re-establishing" an already failed connection without additional handshake. Log excerpt: Remote failed to finish a request within ko-count * timeout peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown ) asender terminated ... peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 ) ... Connection closed peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 ) receiver terminated Impact: while the connection state is erroneously "Connected", requests may be queued and even sent, which would never be acknowledged, and may have been missed by the cleanup. These requests would never be completed. The next drbd_suspend_io() will then lock up, waiting forever for these requests to complete. Fixed in several code paths: Make sure the connection state is NetworkFailure or worse before starting the cleanup in drbd_disconnect(). This should make sure the cleanup won't miss any requests. Disallow receive_state() to "upgrade" the connection state from an error state. This will make sure the "illegal" state transition won't happen. For all connection failure states, relax the safe-guard in sanitize_state() again to silently mask out those state changes (e.g. Timeout -> Connected becomes Timeout -> Timeout). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f479ea06 |
|
27-Oct-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: send intermediate state change results to the peer DRBD state changes schedule after_state_ch() actions to a worker thread, which decides on the old and new states of that change, whether to send an informational state update packet (P_STATE) to the peer. If it decides to drbd_send_state(), it would however always send the _curent_ state, which, if a second state change happens before the after_state_ch() of the first ran, may "fast-forward" the peer's view about this node. In most cases that is harmless, but sometimes this can confuse DRBD, for example into not actually starting a necessary resync if you do a very tight detach/attach loop on a Connected Secondary. Fix this by always sending the "new" state of the respective state transition which scheduled this after_state_ch() work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5ba3dac5 |
|
05-Oct-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Derive sync-UUIDs only from the bitmap-uuid if it is non-zero Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1e86ac48 |
|
04-Aug-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Bugfix for the connection behavior If we get into the C_BROKEN_PIPE cstate once, the state engine set the thi->t_state of the receiver thread to restarting. But with the while loop in drbdd_init() a new connection gets established. After the call into drbdd() returns immediately since the thi->t_state is not RUNNING. The restart of drbd_init() then resets thi->t_state to RUNNING. I.e. after entering C_BROKEN_PIPE once, the next successful established connection gets wasted. The two parts of the fix: * Do not cause the thread to restart if we detect the issue with the sockets while we are in C_WF_CONNECTION. * Make sure that all actions that would have set us to C_BROKEN_PIPE happen before the state change to C_WF_REPORT_PARAMS. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fd2491f4 |
|
18-Jul-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: detach must not try to abort non-local requests from drbd-8.4 Cherry picked form 8.4 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
79f16f5d |
|
15-Jul-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Consider that the no-data-condition could be in connected state ...when the peer has inconsistent data. In that case we failed to clear the susp_nod flag. When the local disk was attached again Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bca482e9 |
|
14-Jul-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed current UUID generation Now, the new edition of the clause only fires if a diskless peer gets promoted. This is a fixup for "drbd: Delayed creation of current-UUID". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
dfa8bedb |
|
29-Jun-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented the disk-timeout option When the disk-timeout is active, and it expires for a single request, we consider the local disk as D_FAILED. Note: With this change, I made both timeout based state transitions HARD state transitions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
02ee8f95 |
|
14-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Force flag for the detach operation Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e1711731 |
|
27-Jun-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Replaced md_io_mutex by an atomic: md_io_in_use The new function drbd_md_get_buffer() aborts waiting for the buffer in case the disk failes in the meantime. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2b4dd36f |
|
14-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6d7e32f5 |
|
15-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Keep a reference to barrier acked requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6809384c |
|
30-Jun-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Improve compatibility with drbd's older than 8.3.7 Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
77e8fdfc |
|
29-Jun-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Only print sanitize state's warnings, if the state change happens The reason for this change is that, with when doing 'drbdadm invalidate' on a disconnected resource caused an "implicitly set pdsk from UpToDate to DUnknown" message, which was missleading. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
07667347 |
|
20-Jun-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: downgraded error printk to info Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
90ab5ee9 |
|
12-Jan-2012 |
Rusty Russell <rusty@rustcorp.com.au> |
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
#
569083c0 |
|
07-Mar-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix drbd_delete_device: remove vnr from volumes; idr_remove(); synchronize_rcu(); before cleanup Still missing: rcu_readlock() on the various call sites that access/iterate over those idrs. We don't need a specific write lock, as we only modify from configuration context, which is already strictly serialized. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
da4a75d2 |
|
23-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: introduce a bio_set to allocate housekeeping bios from Don't rely on availability of bios from the global fs_bio_set, we should use our own bio_set for meta data IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
35abf594 |
|
22-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: add page pool to be used for meta data IO Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2c4a48d0 |
|
23-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove unused define Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
81a5d60e |
|
22-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Replaced the minor_table array by an idr Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
774b3055 |
|
22-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented new commands to create/delete connections/minors Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
80883197 |
|
18-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_nl_(net_conf|disconnect)() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1aba4d7f |
|
21-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Preparing the connector interface to operator on connections Up to now it only operated on minor numbers. Now it can work also on named connections. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2f5cdd0b |
|
21-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted the transfer log from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6e849ce8 |
|
14-Mar-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Get rid of P_MAX_CMD Instead of artificially enlarging the command decoding arrays to P_MAX_CMD entries, check if an index is within the valid range using the ARRAY_SIZE() macro. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7be8da07 |
|
21-Feb-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Improve how conflicting writes are handled The previous algorithm for dealing with overlapping concurrent writes was generating unnecessary warnings for scenarios which could be legitimate, and did not always handle partially overlapping requests correctly. Improve it algorithm as follows: * While local or remote write requests are in progress, conflicting new local write requests will be delayed (commit 82172f7). * When a conflict between a local and remote write request is detected, the node with the discard flag decides how to resolve the conflict: It will ask its peer to discard conflicting requests which are fully contained in the local request and retry requests which overlap only partially. This involves a protocol change. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8ccf218e |
|
24-Feb-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Replace atomic_add_return with atomic_inc_return Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7ad651b5 |
|
21-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: new on-disk activity log transaction format Use a new on-disk transaction format for the activity log, which allows for multiple changes to the active set per transaction. Using 4k transaction blocks, we can now get rid of the work-around code to deal with devices not supporting 512 byte logical block size. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4738fa16 |
|
21-Feb-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use clear_bit_unlock() where appropriate Some open-coded clear_bit(); smp_mb__after_clear_bit(); should in fact have been smp_mb__before_clear_bit(); clear_bit(); Instead, use clear_bit_unlock() to annotate the intention, and have it do the right thing. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
047cd4a6 |
|
15-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: implemented receiving of P_CONN_ST_CHG_REQ Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cf29c9d8 |
|
11-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented conn_send_state_req() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8410da8f0 |
|
11-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Introduced tconn->cstate_mutex In compatibility mode with old DRBDs, use that as the state_mutex as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bbeb641c |
|
10-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Killed volume0; last step of multi-volume-enablement Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2a67d8b9 |
|
09-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_send_ping() and related functions from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
00d56944 |
|
09-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Generalized the work callbacks No longer work callbacks must operate on a mdev. From now on they can also operate on a tconn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6699b655 |
|
09-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Moved some initializing code into drbd_new_tconn() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
392c8801 |
|
09-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: drbd_thread has now a pointer to a tconn instead of to a mdev Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f1b3a6ec |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Consolidated the setup of the thread name into the framework Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a21e9298 |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Moved the mdev member into drbd_work (from drbd_request and drbd_peer_request) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
360cc740 |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_free_sock() and drbd_disconnect() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
80822284 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_calc_cpu_mask() and drbd_thread_current_set_cpu() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
062e879c |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Use and idr data structure to map volume numbers to mdev pointers Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
dc8228d1 |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_send_protocol() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
61120870 |
|
08-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_(get|put)_data_sock() and drbd_send_cmd2() to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d38e787e |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_send_fp() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bedbd2a5 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted drbd_send() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1a7ba646 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted helper functions for drbd_send() to tconn * drbd_update_congested() * we_should_drop_the_connection() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0625ac19 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Converted wake_asender() and request_ping() from mdev to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
01a311a5 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Started to separated connection flags (tconn) from block device flags (mdev) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
60ae4966 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: conn_printk() a dev_printk() alike for drbd's connections Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8ea62f54 |
|
05-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Revert "Make sure we dont send state if a cluster wide state change is in progress" This reverts commit 6e9fdc92b77915d5c7ab8fea751f48378f8b0080. 1) This did not fixed the issue 2) Long sleeping work items can cause IO requests to take as long as the longest work item Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bc31fe33 |
|
07-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Eliminated the user of drbd_task_to_thread() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bed879ae |
|
04-Feb-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Moved the thread name into the data structure Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b8907339 |
|
27-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Moved the state functions into its own source file Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
db830c46 |
|
04-Feb-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Local variable renames: e -> peer_req Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6c852bec |
|
04-Feb-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Update some comments Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f6ffca9f |
|
04-Feb-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename struct drbd_epoch_entry to struct drbd_peer_request Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5e472264 |
|
27-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: _req_conflicts(): Get rid of the epoch_entries tree Instead of keeping a separate tree for local and remote write requests for finding requests and for conflict detection, use the same tree for both purposes. Introduce a flag to allow distinguishing the two possible types of entries in this tree. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9e204cdd |
|
26-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move some functions to where they are used Move drbd_update_congested() to drbd_main.c, and drbd_req_new() and drbd_req_free() to drbd_req.c: those functions are not used anywhere else. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cc378270 |
|
26-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Initialize the sequence number sent over the network even when not used Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bdc7adb0 |
|
26-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove redundant initialization packet_seq is initialized by both sides of a connection in drbd_connect(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d8763023 |
|
26-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename "enum drbd_packets" to "enum drbd_packet" Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f2ad9063 |
|
26-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move cmdname() out of drbd_int.h There is no good reason for cmdname() to be an inline function. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b42a70ad |
|
27-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not access tconn after it was freed Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fd340c12 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Use new header layout The new header layout will only be used if the peer supports it of course. For the first packet and the handshake packet the old (h80) layout is used for compatibility reasons. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c012949a |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Replaced all p_header80 with a generic p_header Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a0638456 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved crypto transformations and friends from mdev to tconn sed -i \ -e 's/mdev->cram_hmac_tfm/mdev->tconn->cram_hmac_tfm/g' \ -e 's/mdev->integrity_w_tfm/mdev->tconn->integrity_w_tfm/g' \ -e 's/mdev->integrity_r_tfm/mdev->tconn->integrity_r_tfm/g' \ -e 's/mdev->int_dig_out/mdev->tconn->int_dig_out/g' \ -e 's/mdev->int_dig_in/mdev->tconn->int_dig_in/g' \ -e 's/mdev->int_dig_vv/mdev->tconn->int_dig_vv/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
87eeee41 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved req_lock and transfer log from mdev to tconn sed -i \ -e 's/mdev->req_lock/mdev->tconn->req_lock/g' \ -e 's/mdev->unused_spare_tle/mdev->tconn->unused_spare_tle/g' \ -e 's/mdev->newest_tle/mdev->tconn->newest_tle/g' \ -e 's/mdev->oldest_tle/mdev->tconn->oldest_tle/g' \ -e 's/mdev->out_of_sequence_requests/mdev->tconn->out_of_sequence_requests/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
31890f4a |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved agreed_pro_version, last_received and ko_count to tconn sed -i \ -e 's/mdev->agreed_pro_version/mdev->tconn->agreed_pro_version/g' \ -e 's/mdev->last_received/mdev->tconn->last_received/g' \ -e 's/mdev->ko_count/mdev->tconn->ko_count/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e6b3ea83 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved receiver, worker and asender from mdev to tconn Patch mostly: sed -i -e 's/mdev->receiver/mdev->tconn->receiver/g' \ -e 's/mdev->worker/mdev->tconn->worker/g' \ -e 's/mdev->asender/mdev->tconn->asender/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e42325a5 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved data and meta from mdev to tconn Patch mostly: sed -i -e 's/mdev->data/mdev->tconn->data/g' \ -e 's/mdev->meta/mdev->tconn->meta/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b2fb6dbe |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved net_cont and net_cnt_wait from mdev to tconn Patch partly generated by: sed -i -e 's/get_net_conf(mdev)/get_net_conf(mdev->tconn)/g' \ -e 's/put_net_conf(mdev)/put_net_conf(mdev->tconn)/g' \ -e 's/get_net_conf(odev)/get_net_conf(odev->tconn)/g' \ -e 's/put_net_conf(odev)/put_net_conf(odev->tconn)/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
89e58e75 |
|
19-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: moved net_conf from mdev to tconn Besides moving the struct member, everything else is generated by: sed -i -e 's/mdev->net_conf/mdev->tconn->net_conf/g' \ -e 's/odev->net_conf/odev->tconn->net_conf/g' \ *.[ch] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2111438b |
|
18-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Minimal struct drbd_tconn Starting to dissolve the network connection from the actual block devices. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
70dc65e1 |
|
21-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove some useless paranoia code The open_cnt check is an open-coded D_ASSERT() check. In case the data.work queue is not empty, it does not really help to know which drbd_work elements remained on that list: they will be freed immediately afterwards, anyway. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
841ce241 |
|
15-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Replace the ERR_IF macro with an assert-like macro Remove the file name and line number from the syslog messages generated: we have no duplicate function names, and no function contains the same assertion more than once. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e77a0a5c |
|
25-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Convert all constants in enum drbd_thread_state to upper case Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8554df1c |
|
25-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Convert all constants in enum drbd_req_event to upper case Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bb3bfe96 |
|
21-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Remove the unused hash tables Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8b946255 |
|
20-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Use interval tree for overlapping epoch entry detection Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
010f6e67 |
|
14-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Put sector and size in struct drbd_epoch_entry into struct drbd_interval Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
dac1389c |
|
21-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Add read_requests tree We do not do collision detection for read requests, but we still need to look up the request objects when we receive a package over the network. Using the same data structure for read and write requests results in simpler code once the tl_hash and app_reads_hash tables are removed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
de696716 |
|
20-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Use interval tree for overlapping write request detection Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ace652ac |
|
03-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Put sector and size in struct drbd_request into struct drbd_interval Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d628769b |
|
13-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Move drbd_free_tl_hash() to drbd_main() This is the only place where this function is used. Make it static. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e7fad8af |
|
11-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Endianness convert the constants instead of the variables Converting the constants happens at compile time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ca9bc12b |
|
11-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Get rid of BE_DRBD_MAGIC and BE_DRBD_MAGIC_BIG Converting the constants happens at compile time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9a8e7753 |
|
11-Jan-2011 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Consistently use block_id == ID_SYNCER for checksum based resync and online verify DRBD_MAGIC has nothing to do with block ids and the funny values computed were not actually used, anyway. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
24c4830c |
|
21-May-2011 |
Bart Van Assche <bvanassche@acm.org> |
drbd: Fix spelling Found these with the help of ispell -l. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
99432fcc |
|
20-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Take a more conservative approach when deciding max_bio_size The old (optimistic) implementation could shrink the bio size on an primary device. Shrinking the bio size on a primary device is bad. Since there we might get BIOs with the old (bigger) size shortly after we published the new size. The new implementation is more conservative, and eventually increases the max_bio_size on a primary device (which is valid). It does so, when it knows the local limit AND the remote limit. We cache the last seen max_bio_size of the peer in the meta data, and rely on that, to make the operation of single nodes more efficient. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fa7d9396 |
|
17-May-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Disallow the peer_disk_state to be D_OUTDATED while connected Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
738a84b2 |
|
02-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fix for application IO with the on-io-error=pass-on policy In case a write failes on the local disk, go into D_INCONSISTENT disk state. That causes future reads of that block to be shipped to the peer. Read retry remote was already in place. Actually the documentation needs to get fixed now. Since the application is still shielded from the error. (as long as we have only a single disk failing) The difference to detach is that we keep the disk. And therefore might keep all the other, still working sectors up to date. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
25985edc |
|
30-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
#
7fde2be9 |
|
01-Mar-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented real timeout checking for request processing time Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e636db5b |
|
21-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential imbalance of ap_in_flight When we receive a barrier ack, we walk the ring list of drbd requests in the transfer log of the respective epoch, do some housekeeping, and free those objects. We tried to keep epochs of mirrored and unmirrored drbd requests separate, and assert that no local-only requests are present in a barrier_acked epoch. It turns out that this has quite a number of corner cases and would add bloated code without functional benefit. We now revert the (insufficient) commits drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions drbd: Ensure that an epoch contains only requests of one kind and instead fix the processing of barrier acks to cope with a mix of local-only and mirrored requests. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0ddc5549 |
|
20-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: silence some noisy log messages during disconnect If we fail to send the information that we lost our disk, we have no connection, and no disk: no access to data anymore. That is either expected (deconfiguration), or there will be so much noise in the logs that "Sending state failed" is not useful at all. Drop it. If the reason for a shorter than expected receive was a signal, which we sent because we already decided to disconnect, these additional log messages are confusing and useless. This patch follows this pattern: - dev_warn(DEV, "short read expecting header on sock: r=%d\n", r); + if (!signal_pending(current)) + dev_warn(DEV, "short read expecting header on sock: r=%d\n", r); Also make them all dev_warn for consistency. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
20ceb2b2 |
|
21-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: describe bitmap locking for bulk operation in finer detail Now that we do no longer in-place endian-swap the bitmap, we allow selected bitmap operations (testing bits, sometimes even settting bits) during some bulk operations. This caused us to hit a lot of FIXME asserts similar to FIXME asender in drbd_bm_count_bits, bitmap locked for 'write from resync_finished' by worker Which now is nonsense: looking at the bitmap is perfectly legal as long as it is not being resized. This cosmetic patch defines some flags to describe expectations in finer detail, so the asserts in e.g. bm_change_bits_to() can be skipped if appropriate. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
62b0da3a |
|
20-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: log UUIDs whenever they change All decisions about sync, sync direction, and wether or not to allow a connect or attach are based on our set of UUIDs to tag a data generation. Log changes to the UUIDs whenever they occur, logging "new current UUID P:Q:R:S" is more useful than "Creating new current UUID". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
79a30d2d |
|
20-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: queue bitmap writeout more intelligently The "lazy writeout" of cleared bitmap pages happens during resync, and should happen again once the resync finishes cleanly, or is aborted. If resync finished cleanly, or was aborted because of peer disk failure, we trigger the writeout from worker context in the after state change work. If resync was aborted because of connection failure, we should not immediately trigger bitmap writeout, but rather postpone the writeout to after the connection cleanup happened. We now do it in the receiver context from drbd_disconnect(). If resync was aborted because of local disk failure, well, there is nothing to write to anymore. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
54b956ab |
|
20-Jan-2011 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't pointlessly queue bitmap send, if we lost connection This is a minor optimization and cleanup, and also considerably reduces some harmless (but noisy) race with the connection cleanup code. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6a35c45f |
|
17-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Ensure that an epoch contains only requests of one kind The assert in drbd_req.c:755 forces us to have only requests of one kind in an epoch. The two kinds we distinguish here are: local-only or mirrored. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
148efa16 |
|
14-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not drop net config if sending in drbd_send_protocol() fails Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
370a43e7 |
|
14-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Work on the Ahead -> SyncSource transition The test if rs_pending_cnt == 0 was too weak. Using Test for unacked_cnt == 0 instead. Moved that into the worker. Since unacked_cnt gets already increased when an P_RS_DATA_REQ comes in. Also using a timer to make Ahead -> SyncSource -> Ahead cycles slower... Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
4a23f264 |
|
11-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not full sync if a P_SYNC_UUID packet gets lost See also commit from 2009-08-15 "drbd_uuid_compare(): Do not full sync in case a P_SYNC_UUID packet gets lost." We saw cases where the History UUIDs where not as expected. So the detection of the special case did not trigger. With the sync UUID no longer being a random number, but deducible from the previous bitmap UUID, the detection of this special case becomes more reliable. The SyncUUID now is the previous bitmap UUID + 0x1000000000000. Rule 5a: Cs = H1p & H1p + Offset = Bp Connection was lost before SyncUUID Packet came through. Corrent (peer) UUIDs: Bp = H1p H1p = H2p H2p = 0 Become Sync target. Rule 7a: Cp = H1s & H1s + Offset = Bs Connection was lost before SyncUUID Packet came through. Correct (own) UUIDs: Bs = H1s H1s = H2s H2s = 0 Become Sync source. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2b8a90b5 |
|
10-Jan-2011 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Corrected off-by-one error in DRBD_MINOR_COUNT_MAX Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
794abb75 |
|
27-Dec-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Cleaned up the resync timer logic Besides removed a few lines of code, this moves the inspection of the state from before the queuing process to after the queuing. I.e. more closely to the actual invocation of the work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
617049aa |
|
21-Dec-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed an issue with AHEAD -> SYNC_SOURCE transitions Create a new barrier when leaving the AHEAD mode. Otherwise we trigger the assertion in req_mod(, barrier_acked) D_ASSERT(req->rq_state & RQ_NET_SENT); The new barrier is created by recycling the newest existing one. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3f98688a |
|
20-Dec-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: There might be a resync after unfreezing IO due to no disk [Bugz 332] When on-no-data-accessible is set to suspend-io, also consider that a Primary, SyncTarget node losses its connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
06d33e96 |
|
18-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: improve on bitmap write out timing Even though we now track the need for bitmap writeout per bitmap page, there is no need to trigger the writeout while a resync is going on. Once the resync is finished (or aborted), we trigger bitmap writeout anyways. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
418e0a92 |
|
18-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: spelling fix in log message Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5a22db89 |
|
17-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: serialize sending of resync uuid with pending w_send_oos To improve the latency of IO requests during bitmap exchange, we recently allowed writes while waiting for the bitmap, sending "set out-of-sync" information packets for any newly dirtied bits. We have to make sure that the new resync-uuid does not overtake these "set oos" packets. Once the resync-uuid is received, the sync target starts the resync process, and expects the bitmap to only be cleared, not re-set. If we use this protocol extension, we queue the generation and sending of the resync-uuid on the worker, which naturally serializes with all previously queued packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2265b473 |
|
16-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential dereference of NULL pointer If drbd used to have crypto digest algorithms configured, then is being unconfigured (but not unloaded), it frees the algorithms, but does not reset the config. If it then is reconfigured to use the very same algorithm, it "forgot" to re-allocate the algorithms, thinking that the config has not changed in that aspect. It will then Oops on the first attempt to actually use those algorithms. Fix this by resetting the config to defaults after cleanup. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
02851e9f |
|
16-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: move bitmap write from resync_finished to after_state_change We must not call it directly from resync_finished, as we may be in either receiver or worker context there. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
19f843aa |
|
15-Dec-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: bitmap keep track of changes vs on-disk bitmap When we set or clear bits in a bitmap page, also set a flag in the page->private pointer. This allows us to skip writes of unchanged pages. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1b881ef7 |
|
13-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename __inc_ap_bio_cond to may_inc_ap_bio The old name is confusing: the function does not increment anything. Also rename _inc_ap_bio_cond to inc_ap_bio_cond: there is no need for an underscore. Finally, make it clear that these functions return boolean values. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f70af118 |
|
11-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: send_bitmap_rle_or_plain: Get rid of ugly and useless enum Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
81e84650 |
|
09-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Use the standard bool, true, and false keywords Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bf885f8a |
|
07-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Be more explicit about functions that return an enum drbd_state_rv Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c8b32563 |
|
07-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename enum drbd_state_ret_codes to enum drbd_state_rv Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
116676ca |
|
08-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename enum drbd_ret_codes to enum drbd_ret_code Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
662d91a2 |
|
06-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Get rid of unnecessary macros (1) This macro doesn't save much code, but makes things a lot harder to read. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2f58dcfc |
|
13-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Rename drbd_make_request_26 to drbd_make_request Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cab2f74b |
|
09-Dec-2010 |
Andreas Gruenbacher <agruen@linbit.com> |
drbd: Make sure that drbd_send() has sent the right number of bytes Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
17a93f30 |
|
24-Nov-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: remove /proc/drbd before unregistering from netlink There still exists a (theoretical) race on module unload, where /proc/drbd may still exist, but the netlink callback has been unregistered already, allowing drbdsetup to shout without listeners, and get no reply. Reorder remove_proc_entry and unregister of netlink callback. drbdsetup first checks for existence of the proc entry, and if that is missing, won't even try to contact the module. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1fc80cf3 |
|
22-Nov-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Becoming sync target may not happen out of < C_WF_REPORT_PARAMS This patch is acutally a necessary addendum to the patch "fix for spurious full sync (becoming sync target looked like invalidate)" Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3719094e |
|
09-Nov-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap * C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets written to disk. Locking out of app-IO is done by using the drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days. It is no longer necessary to lock out app-IO based on the connection state. App-IO that may come in after the BITMAP_IO flag got cleared before the state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets a bit in the local bitmap, that is already set, therefore changes nothing. * C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets). With that we make sure they have the same number of bits when going into the C_SYNC_(SOURCE|TARGET) connection state. * C_UNCONNECTED: The receiver starts, no need to lock out IO. * C_DISCONNECTING: in drbd_disconnect() we had a wait_event() to wait until ap_bio_cnt reaches 0. Removed that. * C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING * C_WF_REPORT_PARAMS: IO still possible since that is still like C_WF_CONNECTION. And we do not need to send barriers in C_WF_BITMAP_S connection state. Allow concurrent accesses to the bitmap when receiving the bitmap. Everything gets ORed anyways. A drbd_free_tl_hash() is in after_state_chg_work(). At that point all the work items of the last connections must have been processed. Introduced a call to drbd_free_tl_hash() into drbd_free_mdev() for paranoia reasons. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ab17b68f |
|
17-Nov-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Improvements in sanitize_state() The relevant change is that the state change to C_FW_BITMAP_S should implicitly change pdsk to C_CONSISTENT. (Think of it as C_OUTDATED, only without the guarantee that the peer has the outdated written to its meta data) At that opportunity I restructured the switch statement so that it gets evaluated every time. (Has declarative character) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
22afd7ee |
|
16-Nov-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed race condition in drbd_queue_bitmap_io May only test for ap_bio_cnt == 0 under req_lock. It can increase only under req_lock. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
127b3178 |
|
16-Nov-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: use test_and_set_bit() to decide if bm_io_work should be queued Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
c4752ef1 |
|
27-Oct-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: When proxy's buffer drained off go into regular resync mode Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
73a01a18 |
|
27-Oct-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: New packet for Ahead/Behind mode: P_OUT_OF_SYNC Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
67531718 |
|
26-Oct-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented two new connection states Ahead/Behind In this connection mode, the ahead node no longer replicates application IO. The behind's disk becomes out dated. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
759fbdfb |
|
26-Oct-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Track the numbers of sectors in flight Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1816a2b4 |
|
11-Nov-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: properly use max_hw_sectors to limit the our bio size To ease tracking of bios in some hash tables, we want it to not cross certain boundaries (128k, used to be 32k). We limit the maximum bio size using queue parameters. Historically some defines and variables we use there have been named max_segment_size, which was misguided. Rename them to max_bio_size, and use [blk_]queue_max_hw_sectors where appropriate. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
470be44a |
|
10-Nov-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: detect modification of in-flight buffers With data-integrity digest enabled, double-check on the sending side for modifications by upper layers of buffers under write back, so we can tell it appart from corruption on the "wire". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2649f080 |
|
05-Nov-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use the resync controller for online-verify requests as well Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
30b743a2 |
|
05-Nov-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: improve online-verify progress tracking For a partial (resumed) online-verify, initialize rs_total not to total bits, but to number of bits to check in this run, to match the meaning rs_total has for actual resync. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
721a9602 |
|
09-Mar-2011 |
Jens Axboe <jaxboe@fusionio.com> |
block: kill off REQ_UNPLUG With the plugging now being explicitly controlled by the submitter, callers need not pass down unplugging hints to the block layer. If they want to unplug, it's because they manually plugged on their own - in which case, they should just unplug at will. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
7eaceacc |
|
10-Mar-2011 |
Jens Axboe <jaxboe@fusionio.com> |
block: remove per-queue plugging Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
e525fd89 |
|
13-Nov-2010 |
Tejun Heo <tj@kernel.org> |
block: make blkdev_get/put() handle exclusive access Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Brown <neilb@suse.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Philipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
#
2027ae1f |
|
28-Oct-2010 |
Nicolas Kaiser <nikai@nikai.net> |
drivers/block/drbd/drbd_main.c: fix error path Failure to create drbd_ee_mempool appears not to get checked. Looks like a copy-and-paste problem to me. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
650789c8 |
|
25-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Removed checks for REQ_HARDBARRIER on incomming BIOs Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2451fc3b |
|
24-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
82f59cc6 |
|
15-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix potential deadlock on detach If we have contention in drbd_al_begin_iod (heavy randon IO), an administrative request to detach the disk may deadlock for similar reasons as the recently fixed deadlock if detaching because of IO-error. The approach taken here is to either go through the intermediate cleanup state D_FAILED, or first lock out application io, don't just go directly to D_DISKLESS. We need an additional state bit (WAS_IO_ERROR) to distinguish the -> D_FAILED because of IO-error from other failures. Sanitize D_ATTACHING -> D_FAILED to D_ATTACHING -> D_DISKLESS. If only attaching, ldev may be missing still, but would be referenced from within the after_state_ch for -> D_FAILED, potentially dereferencing a NULL pointer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
aaa8e2b3 |
|
15-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: consolidate explicit drbd_md_sync into drbd_create_new_uuid Every code path changing the current UUID needs to get it on stable storage anyways. Flush it to disk right there, remove the now obsolte explicit drbd_md_sync statements in the other code paths. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
5dbfe7ae |
|
15-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: add race-breaker to drbd_go_diskless This adds a necessary race breaker to these commits: drbd: fix for possible deadlock on IO error during resync drbd: drop wrong debug asserts, fix recently introduced race What we do is get a refcount, check the state, then depending on the state and the requested minimum disk state, either hold it (success), or give it back immediately (failed "try lock"). Some code paths (flushing of drbd metadata) may still grab and hold a refcount even if we are D_FAILED (application IO won't). So even if we hit local_cnt == 0 once after being D_FAILED, we still need to wait for that again after we changed to D_DISKLESS. Once local_cnt reaches 0 while we are D_DISKLESS, we can be sure that no one will look at the protected members anymore, so only then is it safe to free them. We cannot easily convert to standard locking primitives here, as we want to be able to use it in atomic context (we always do a "try lock"), as well as hold references for a "long time" (from IO submission to completion callback). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ac724121 |
|
07-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use dynamic_dev_dbg to optionally log uuid changes Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ca0e6098 |
|
14-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: relax the grace period of the md_sync timer again Consolidate the ifdef's for the debug level, accidentally the used both DEBUG and DRBD_DEBUG_MD_SYNC. Default to off. For production, we can safely reduce the grace period for this timer again the the value we used to have. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9d282875 |
|
14-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: drop wrong debug asserts, fix recently introduced race commit 2372c38caadeaebc68a5ee190782c2a0df01edc3 drbd: fix for possible deadlock on IO error during resync introduced a new ASSERT, which turns out to be wrong. Drop it. Also serialize the state change to D_DISKLESS with the after state change work of the -> D_FAILED transition, don't open a new race. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e9e6f3ec |
|
14-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix for possible deadlock on IO error during resync Scenario: Something (say, flush-147:0) is in drbd_al_begin_io, holding a local_cnt, waiting for the resync to make progress. Disk fails, worker in after_state_ch does drbd_rs_cancel_all, then waits for local_cnt to drop to zero. flush-147:0 is woken by drbd_rs_cancel_all, needs to write an AL transaction, and queues that on the worker. Deadlock. Fix: do not wait in the worker, have put_ldev() trigger the state change D_FAILED -> D_DISKLESS when necessary. put_ldev() cannot do the state change directly, as it may or may not already hold various spinlocks. We queue a short work instead. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
af85e8e8 |
|
07-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix for spurious fullsync (uuids rotated too fast) If it was an "empty" resync, the SyncSource may have already "finished" the resync and rotated the UUIDs, before noticing the connection loss (and generating a new uuid, if Primary, rotating again), while the SyncTarget did not change its uuids at all, or only got to the previous sync-uuid. This would then again lead to a full sync on next handshake (see also Bug #251). Fix: Use explicit resync finished notification even for empty resyncs, do not finish an empty resync implicitly on the SyncSource. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2b2bf214 |
|
06-Oct-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: drbd_send_ack_dp must not rely on header information drbd commit 17c854fea474a5eb3cfa12e4fb019e46debbc4ec drbd: receiving of big packets, for payloads between 64kByte and 4GByte introduced a new on-the-wire packet header format. We must no longer assume either format, but use the result of whatever drbd_recv_header has decoded. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f65363cf |
|
14-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix possible access after free If we release the page pointed to by md_io_tmpp, we need to zero out the pointer, too, as that may be used later to decide whether we need to allocate a new page again. Impact: a previously freed page may be used and clobbered. Depending on what that particular page is being used for meanwhile, this may result in silent data corruption of completely unrelated things. Only of concern on devices with logical_block_size != 512 byte, if you re-attach after becoming diskless once. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
fb22c402 |
|
08-Sep-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Track the reasons to suspend IO in dedicated state bits There are three ways to get IO suspended: * Loss of any access to data * Fence-peer-handler running * User requested to suspend IO Track those in different bits, so that one condition clearing its state bit does not interfere with the other two conditions. Only when the user resumes IO he overrules all three bits. The fact is hidden from the user, he sees only a single suspend bit. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f2906e18 |
|
21-Jul-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix for spurious full sync (becoming sync target looked like invalidate) If a synctarget lost connection while being WFSyncUUID, due to "state sanitizing", the attempted state change to SyncTarget looked like an "invalidate" to after_state_ch() later, thus caused a full sync on next handshake (Bug #318). drbd0: PingAck did not arrive in time. drbd0: peer( Primary -> Unknown ) conn( WFSyncUUID -> NetworkFailure ) pdsk( UpToDate -> DUnknown ) from : { cs:NetworkFailure ro:Secondary/Unknown ds:UpToDate/DUnknown r--- } to : { cs:SyncTarget ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } after sanizising, resulted in state: { cs:NetworkFailure ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } drbd0: disk( UpToDate -> Inconsistent ) Fix: don't mask state transition errors in "sanitizing", so the requested state change to SyncTarget fails, instead of being implicitly "remaped" to invalidate. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
02bc7174 |
|
05-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: cosmetic, don't report resync for online-verify Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
435f0740 |
|
05-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't count sendpage()d pages only referenced by tcp as in use Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
76d2e7ec |
|
25-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Adding support for BIO/Request flags: REQ_FUA, REQ_FLUSH and REQ_DISCARD Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
ee15b038 |
|
03-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix race on meta-data update, addendum addendum to baa33ae4eaa4477b60af7c434c0ddd1d182c1ae7 The race: drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; ==> RACE with drbd_md_mark_dirty() rearming the timer. del_timer(&mdev->md_sync_timer); Fixed by moving the del_timer before the test_and_clear_bit. Additionally only rearm the timer in drbd_md_mark_dirty, if MD_DIRTY was not already set, reduce the grace period from five to one second, and add an ifdef'ed debuging aid to find code paths missing an explicit drbd_md_sync, if any, as those are the only relevant ones for this race. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
63106d3c |
|
01-Sep-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Removed a race that could cause unexpected execution of w_make_resync_request() The actual race happened int the drbd_start_resync() function. Where drbd_resync_finished() -> __drbd_set_state() set STOP_SYNC_TIMER and armed the timer. If the timer fired before execution reaches the mod_timer statement at the end of drbd_start_resync() the latter would cause an unexpected call to w_make_resync_request(). Removed the STOP_SYNC_TIMER bit, and base it on the connection state. The STOP_SYNC_TIMER bit probably originates probably the time before the state engine. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
3f3a9b84 |
|
01-Sep-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix race on meta-data update The race: drbd_md_mark_dirty() drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE) ==> RACE clear_bit(MD_DIRTY, &mdev->flags); <== spurious Fixed by removing the spurious clear_bit. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0778286a |
|
30-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Disable activity log updates when the whole device is out of sync When the complete device is marked as out of sync, we can disable updates of the on disk AL. Currently AL updates are only disabled if one uses the "invalidate-remote" command on an unconnected, primary device, or when at attach time all bits in the bitmap are set. As of now, AL updated do not get disabled when a all bits becomes set due to application writes to an unconnected DRBD device. While this is a missing feature, it is not considered important, and might get added later. BTW, after initializing a "one legged" DRBD device drbdadm create-md resX drbdadm -- --force primary resX AL updates also get disabled, until the first connect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
d5373389 |
|
23-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Actually allow BIOs up to 128k (was 32k). Now we have multiple BIOs per ee, packets with a 32 bit length field, it gets time to use these goodies. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0b70a13d |
|
20-Aug-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Sending of big packets, for payloads from 64KByte to 4GByte Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0f0601f4 |
|
11-Aug-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: new configuration parameter c-min-rate We now track the data rate of locally submitted resync related requests, and can thus detect non-resync activity on the lower level device. If the current sync rate is above c-min-rate, and the lower level device appears to be busy, we throttle the resyncer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1d7734a0 |
|
11-Aug-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use rolling marks for resync speed calculation The current resync speed as displayed in /proc/drbd fluctuates a lot. Using an array of rolling marks makes this calculation much more stable. We used to have this (a long time ago with 0.7), but it got lost somehow. If "stalled", do not discard the rest of the information, just add a " (stalled)" tag to the progress line. This patch also shortens a spinlock critical section somewhat, and reduces the number of atomic operations in put_ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
778f271d |
|
06-Jul-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: The new, smarter resync speed controller Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8e26f9cc |
|
06-Jul-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: New sync_param packet, that includes the parameters of the new controller Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
9a31d716 |
|
05-Jul-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: New sync parameters for the smart resync rate controller Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e756414f |
|
29-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Initialize all members of sync_conf to their defaults [Bugz 315] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
67098930 |
|
24-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Make sure tl_restart(, resend) can not get called multiple times for a new connection Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
f70b3511 |
|
24-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not try to free tl_hash in drbd_disconnect() when IO is suspended We may not free tl_hash when IO is suspended, since we can not wait until ap_bio_cnt reaches zero. We can do this after susp reched 0, since then tl_clear was called Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
84dfb9f5 |
|
23-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed a deadlock, probably only affected UP machines After disconnect (most likely mdev->net_cnt == 0) and we are still in an unstable state (!drbd_state_is_stable()). When we get an IO request in drbd_get_max_buffers() (called from __inc_ap_bio_cond(), called from inc_ap_bio()) we wake up misc_wait. Misc_wait is also used in inc_ap_bio() to sleep until the outcome of __inc_ap_bio_cond() changes. => Busy loop! Solution: Have a dedicated wait queue for get_net_conf() and put_net_conf(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
43a5182c |
|
11-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Delayed creation of current-UUID When a fencing policy of "resource-and-stonith" is configured, and DRBD looses connection to it's peer, we can delay the creation of a new current-UUID until IO gets thawed. That allows one to deploy fence-peer handlers that actually commit suicide on the machine they get started. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
1616a254 |
|
10-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Reduce the verbosity of some state transitions State transitions in the space of non-allowed states used to be very noisy. Reduce that, since that has little value for the majority of the user base. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
999122bc |
|
10-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Removing a by now obsolete clause in the state sanitizing Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
18a50fa2 |
|
21-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Now we need to handle the ed_uuid of an diskless, unconnected primary correctly Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
265be2d0 |
|
31-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Finished the "on-no-data-accessible suspend-io;" functionality When no data is accessible (no connection to the peer, nor a local disk) allow the user to select to freeze all IO operations instead of getting IO errors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
b9b98716 |
|
22-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not send two barriers without any writes between them Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
11b58e73 |
|
12-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: factored tl_restart() out of tl_clear(). If IO was frozen for a temporal network outage, resend the content of the transfer-log into the newly established connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
288f422e |
|
27-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Track all IO requests on the TL, not writes only With that the drbd_fail_pending_reads() function becomes obsolete. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7e602c0a |
|
27-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: renamed drbd_tl_epoch.n_req to drbd_tl_epoch.n_writes Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
2a48fc0a |
|
02-Jun-2010 |
Arnd Bergmann <arnd@arndb.de> |
block: autoconvert trivial BKL users to private mutex The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
e7f52dfb |
|
03-Aug-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: revert "delay probes", feature is being re-implemented differently It was a now abandoned attempt to throttle resync bandwidth based on the delay it causes on the bulk data socket. It has no userbase yet, and has been disabled by 9173465ccb51c09cc3102a10af93e9f469a0af6f already. This removes the now unused code. The basic feature, namely using up "idle" bandwith of network and disk IO subsystem, with minimal impact to application IO, is being reimplemented differently. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
85f4cc17 |
|
29-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Initialize all members of sync_conf to their defaults [Bugz 315] Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
6710a576 |
|
19-Jul-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Disable delay probes for the upcomming release Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
6e9624b8 |
|
07-Aug-2010 |
Arnd Bergmann <arnd@arndb.de> |
block: push down BKL into .open and .release The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
7b6d91da |
|
07-Aug-2010 |
Christoph Hellwig <hch@lst.de> |
block: unify flags for struct bio and struct request Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
dc66c74d |
|
02-Jun-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixed a race between disk-attach and unexpected state changes This was a very hard to trigger race condition. If we got a state packet from the peer, after drbd_nl_disk() has already changed the disk state to D_NEGOTIATING but after_state_ch() was not yet run by the worker, then receive_state() might called drbd_sync_handshake(), which in turn crashed when accessing p_uuid. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7383506c |
|
27-May-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use drbd specific ratelimit instead of global printk_ratelimit using the global printk_ratelimit() may mask other messages. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
ba11ad9a |
|
25-May-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: improve usage of MSG_MORE It seems to improve performance if we allow the "p_data" header in its own frame (no MSG_MORE), but sendpage all but the last page with MSG_MORE. This is also in preparation of a later zero copy receive implementation. Suggested by Eduard.Guzovsky@stratus.com on drbd-dev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
2c8d1967 |
|
25-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Revert "drbd: Create new current UUID as late as possible" The late-UUID writing is delayed until the next release. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
#
4e23a59e |
|
20-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not free p_uuid early, this is done in the exit code of the receiver Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
4604d636 |
|
19-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Ensure to not trigger late-new-UUID creation multiple times Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
31a31dcc |
|
19-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not Oops when C_STANDALONE when uuid gets generated Got introduces with commit 0c3f34516e8c5a1a0ba3585a7777d32bbbdf4ecb Author: Philipp Reisner <philipp.reisner@linbit.com> Date: Mon May 17 16:10:43 2010 +0200 drbd: Create new current UUID as late as possible Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
0c3f3451 |
|
17-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Create new current UUID as late as possible The choice was to either delay creation of the new UUID until IO got thawed or to delay it until the first IO request. Both are correct, the later is more friendly to users of dual-primary setups, that actually only write on one side. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
45bb912b |
|
14-May-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: Allow drbd_epoch_entries to use multiple bios. This should allow for better performance if the lower level IO stack of the peers differs in limits exposed either via the queue, or via some merge_bvec_fn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
162f3ec7 |
|
06-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fixes to the new delay_probes code * Only send delay_probes with protocol 93 or newer * drbd_send_delay_probes() is called only from worker context, no atomic_t needed for delay_seq Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
a8cdfd8d |
|
05-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: A fixes to the new resync speed code * Mention P_DELAY_PROBE in the packet naming array * Do not corrupt the mdev->data.work list in case the timer goes off before delay_probe_work got handled by the worker * Do not mod_timer() twice for a single delay_probe pair Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
bd26bfc5 |
|
03-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Actually send delay probes Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7237bc43 |
|
03-May-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Sending of delay_probes Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0ced55a3 |
|
30-Apr-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Receiving of delay_probes Delay_probes are new packets in the DRBD protocol, which allow DRBD to know the current delay packets have on the data socket. (relative to the meta data socket) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6b4388ac |
|
26-Apr-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Added transmission faults to the fault injection code Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e89b591c |
|
24-Mar-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented flags for the resize packet Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
02d9a94b |
|
24-Mar-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Implemented the set_new_bits parameter for drbd_bm_resize() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8d4ce82b |
|
01-Apr-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: don't start a resync without access to up-to-date Data In case both nodes are "inconsistent", invalidate would have started a resync anyways, without a chance to ever succeed, just filling the logs with warning messages. Simply disallow that state change, re-using the SS_NO_UP_TO_DATE_DISK return value. This also changes the corresponding error string to "Need access to UpToDate Data" -- I found the "Refusing to be Primary without at least one UpToDate disk" answer misleading in some situations anyways. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e0f83012 |
|
01-Apr-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix regression: attach while connected failed commit e4f925e12ea5daaa9baf2dd5af9c4951721dae95 Author: Philipp Reisner <philipp.reisner@linbit.com> Date: Wed Mar 17 14:18:41 2010 +0100 drbd: Do not upgrade state to Outdated if already Inconsistent prevented the necessary state transition for attaching while connected (Diskless -> Consistent respectively Outdated). This is the fix for the fix. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
e4f925e1 |
|
17-Mar-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Do not upgrade state to Outdated if already Inconsistent [Bugz 277] There was a race condition: In a situation with a SyncSource+Primary and a SyncTarget+Secondary node, and a resync dependency to some other device. After both nodes decided to do the resync, the other device finishes its resync process. At that time SyncSource already sent the P_SYNC_UUID packet, and already updated its peer disk state to Inconsistent. The SyncTarget node waits for the P_SYNC_UUID and sends a state packet to report the resync dependency change. That packet still carries a disk state of Outdated. Impact: If application writes come in, during that time on the Primary node, those do not get replicated, and the out-of-sync counter gets increased. => The completion of resync is not detected on the primary node. => stalled. Those blocks get resync'ed with the next resync, since the are get marked as out-of-sync in the bitmap. In order to fix this, we filter out that wrong state change in the sanitize_state() function. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
8c484ee4 |
|
11-Mar-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: use proc_create_data with explicit NULL argument To document that we know about deprecation of proc_create, even though we are not affected, as we don't use the ->data member, open code proc_create_data(..., NULL); Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
7ac314c8 |
|
22-Apr-2010 |
Dan Carpenter <error27@gmail.com> |
drbd: fix memory leak We leak memory if "--dry-run" is not supported by the peer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
4589d7f8 |
|
02-Mar-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd_disconnect: grab meta.socket mutex as well Fixes a race and potential kernel panic if e.g. the worker was just about to send a few P_RS_IS_IN_SYNC via the meta socket for checksum based resync, while the receiver destroys the sockets in drbd_disconnect. To make sure no-one is using the meta socket, it is not enough to stop the asender... Grab the meta socket mutex before destroying it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
cf14c2e9 |
|
02-Feb-2010 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: --dry-run option for drbdsetup net ( drbdadm -- --dry-run connect <res> ) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
98ec286e |
|
21-Jan-2010 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
drbd: fix max_segment_size initialization blk_queue_make_request() internally calls blk_set_default_limits(), so calling blk_queue_max_segment_size() before is useless. Ergo: move the call to blk_queue_max_segment_size() down a few lines. Impact: If, after a fresh modprobe, you first connect a Diskless drbd, then attach, this could result in a DRBD Protocol Error at first. The next connection attempt would then succeeded. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
0a6dbf2b |
|
28-Dec-2009 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbd: Fix for a race between IO and a detach operation [Bugz 262] In D_DISKLESS we do not hand out any new references to ldev (local_cnt) therefore waiting until all previously handed out refereces got returned is sufficient before actually freeing mdev->ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
820cd61a |
|
13-Dec-2009 |
Huang Weiyi <weiyi.huang@gmail.com> |
drbd: remove unused #include <linux/version.h> Remove unused #include <linux/version.h>('s) in drivers/block/drbd/drbd_main.c drivers/block/drbd/drbd_receiver.c drivers/block/drbd/drbd_worker.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
49829ea7 |
|
15-Dec-2009 |
Roel Kluin <roel.kluin@gmail.com> |
drbd: Fix test of unsigned in _drbd_fault_random() rsp->count is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
7d4e9d09 |
|
13-Dec-2009 |
Emese Revfy <re.emese@gmail.com> |
drbd: Constify struct file_operations Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
|
#
4a63b030 |
|
17-Dec-2009 |
Roel Kluin <roel.kluin@gmail.com> |
drbd: fix test of unsigned in _drbd_fault_random() rsp->count is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
0a492166 |
|
21-Oct-2009 |
Philipp Reisner <philipp.reisner@linbit.com> |
drbdsetup X resume-io should be usable to resume IO [Bugz 256] When IO gets frozen due to a broken fence-peer script, the user should be able to thaw IO by the resume-io command. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
#
6a0afdf5 |
|
01-Oct-2009 |
Jens Axboe <jens.axboe@oracle.com> |
drbd: remove tracing bits They should be reimplemented in the current scheme. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
ab8fafc2 |
|
28-Sep-2009 |
Lars Ellenberg <lars.ellenberg@linbit.com> |
dropping unneeded include autoconf.h It is force-included on the gcc command line since at least 2.6.15. Explicit include lines seem to break compilation now in certain configurations. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
#
b411b363 |
|
25-Sep-2009 |
Philipp Reisner <philipp.reisner@linbit.com> |
The DRBD driver Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|