s390/delay: sync comment within __delay() with reality

The comment within __delay() is outdated and does not reflect anymore
what the function is doing. Therefore replace the comment.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: remove invalid email address of Heiko Carstens

Remove my old invalid email address which can be found in a couple of
files. Instead of updating it, just remove my contact data completely
from source files.
We have git and other tools which allow to figure out who is responsible
for what with recent contact data.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390/delay: get rid of not needed header includes

After all the changes to delay.c there are many includes which are not
needed anymore. Get rid of them.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/delay: remove udelay_simple()

udelay_simple() callers can make use of the now simplified udelay()
implementation. No need to keep it.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/delay: simplify udelay

udelay is implemented by using quite subtle details to make it
possible to load an idle psw and waiting for an interrupt even in irq
context or when interrupts are disabled. Also handling (or better: no
handling) of softirqs is taken into account.

All this is done to optimize for something which should in normal
circumstances never happen: calling udelay to busy wait. Therefore get
rid of the whole complexity and just busy loop like other
architectures are doing it also.

It could have been possible to use diag 0x44 instead of cpu_relax() in
the busy loop, however we have seen too many bad things happen with
diag 0x44 that it seems to be better to simply busy loop.

Also note that with this new implementation kernel preemption does
work when within the udelay loop. This did not work before.

To get a feeling what the former code optimizes for: IPL'ing a kernel
with 'defconfig' and afterwards compiling a kernel ends with a total
of zero udelay calls.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: fix irq state tracing

With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.

This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.

A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.

Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.

This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().

Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390/udelay: make it work for the early code

Currently udelay relies on working EXT interrupts handler, which is not
the case during early startup. In such cases udelay_simple() has to be
used instead.

To avoid mistakes of calling udelay too early, which could happen from
the common code as well - make udelay work for the early code by
introducing static branch and redirecting all udelay calls to
udelay_simple until EXT interrupts handler is fully initialized and
async stack is allocated.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: remove critical section cleanup from entry.S

The current code is rather complex and caused a lot of subtle
and hard to debug bugs in the past. Simplify the code by calling
the system_call handler with interrupts disabled, save
machine state, and re-enable them later.

This requires significant changes to the machine check handling code
as well. When the machine check interrupt arrived while being in kernel
mode the new code will signal pending machine checks with a SIGP external
call. When userspace was interrupted, the handler will switch to the
kernel stack and directly execute s390_handle_mcck().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/time: add support for the TOD clock epoch extension

The TOD epoch extension adds 8 epoch bits to the TOD clock to provide
a continuous clock after 2042/09/17. The store-clock-extended (STCKE)
instruction will store the epoch index in the first byte of the
16 bytes stored by the instruction. The read_boot_clock64 and the
read_presistent_clock64 functions need to take the additional bits
into account to give the correct result after 2042/09/17.

The clock-comparator register will stay 64 bit wide. The comparison
of the clock-comparator with the TOD clock is limited to bytes
1 to 8 of the extended TOD format. To deal with the overflow problem
due to an epoch change the clock-comparator sign control in CR0 can
be used to switch the comparison of the 64-bit TOD clock with the
clock-comparator to a signed comparison.

The decision between the signed vs. unsigned clock-comparator
comparisons is done at boot time. Only if the TOD clock is in the
second half of a 142 year epoch the signed comparison is used.
This solves the epoch overflow issue as long as the machine is
booted at least once in an epoch.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: Audit and remove any remaining unnecessary uses of module.h

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each change instance
for the presence of either and replace as needed. An instance
where module_param was used without moduleparam.h was also fixed,
as well as implicit use of ptrace.h and string.h headers.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/udelay: make udelay have busy loop semantics

When using systemtap it was observed that our udelay implementation is
rather suboptimal if being called from a kprobe handler installed by
systemtap.

The problem observed when a kprobe was installed on lock_acquired().
When the probe was hit the kprobe handler did call udelay, which set
up an (internal) timer and reenabled interrupts (only the clock comparator
interrupt) and waited for the interrupt.
This is an optimization to avoid that the cpu is busy looping while waiting
that enough time passes. The problem is that the interrupt handler still
does call irq_enter()/irq_exit() which then again can lead to a deadlock,
since some accounting functions may take locks as well.

If one of these locks is the same, which caused lock_acquired() to be
called, we have a nice deadlock.

This patch reworks the udelay code for the interrupts disabled case to
immediately leave the low level interrupt handler when the clock
comparator interrupt happens. That way no C code is being called and the
deadlock cannot happen anymore.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/lib: export __delay

__delay is exported by most architectures, and may be used in modules.
Since it is not exported for s390, s390:allmodconfig currently fails
to build with

ERROR: "__delay" [drivers/net/phy/mdio-octeon.ko] undefined!

Fixes: a6d678645210 ("net: mdio-octeon: Modify driver to work on both
ThunderX and Octeon")
Cc: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/idle: consolidate idle functions and definitions

Move the C functions and definitions related to the idle state handling
to arch/s390/include/asm/idle.h and arch/s390/kernel/idle.c. The function
s390_get_idle_time is renamed to arch_cpu_idle_time and vtime_stop_cpu to
enabled_wait.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/time: correct use of store clock fast

The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
It can happen that the value stored on one CPU is smaller than the value
stored on another CPU, although the order of the stores is the other
way around. This can cause deltas of get_tod_clock() values to become
negative when they should not be.

We need to be more careful with store-clock-fast, this patch partially
reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time:
always use stckf instead of stck if available". The get_tod_clock()
function now uses the store-clock-extended (STCKE) instruction.
get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
is acceptable e.g. for wait loops local to a CPU.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/time: return with irqs disabled from psw_idle

Modify the psw_idle waiting logic in entry[64].S to return with
interrupts disabled. This avoids potential issues with udelay
and interrupt loops as interrupts are not reenabled after
clock comparator interrupts.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/time: rename tod clock access functions

Fix name clash with some common code device drivers and add "tod"
to all tod clock access function names.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/vtimer: rework virtual timer interface

The current virtual timer interface is inherently per-cpu and hard to
use. The sole user of the interface is appldata which uses it to execute
a function after a specific amount of cputime has been used over all cpus.

Rework the virtual timer interface to hook into the cputime accounting.
This makes the interface independent from the CPU timer interrupts, and
makes the virtual timers global as opposed to per-cpu.
Overall the code is greatly simplified. The downside is that the accuracy
is not as good as the original implementation, but it is still good enough
for appldata.

Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/comments: unify copyright messages and remove file names

Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] rework idle code

Whenever the cpu loads an enabled wait PSW it will appear as idle to the
underlying host system. The code in default_idle calls vtime_stop_cpu
which does the necessary voodoo to get the cpu time accounting right.
The udelay code just loads an enabled wait PSW. To correct this rework
the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts
to entry[64].S, vtime_stop_cpu can now be called from anywhere and
vtime_start_cpu is gone. The correction of the cpu time during wakeup
from an enabled wait PSW is done with a critical section in entry[64].S.
As vtime_start_cpu is gone, s390_idle_check can be removed as well.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] cleanup psw related bits and pieces

Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS
to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function
enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros.
Change psw_kernel_bits / psw_user_bits to contain only the bits that
are always set in the respective mode.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] delay: implement ndelay

Implement ndelay() on s390 as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] time: let local_tick_enable/disable() reprogram the clock comparator

Let local_tick_enable/disable() reprogram the clock comparator so the
function names make semantically more sense.
Also that way the functions are more symmetric since normally each
local_tick_enable() call usually would have a subsequent call to
set_clock_comparator() anyway.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] nmi: fix clock comparator revalidation

On each machine check all registers are revalidated. The save area for
the clock comparator however only contains the upper most seven bytes
of the former contents, if valid.
Therefore the machine check handler uses a store clock instruction to
get the current time and writes that to the clock comparator register
which in turn will generate an immediate timer interrupt.
However within the lowcore the expected time of the next timer
interrupt is stored. If the interrupt happens before that time the
handler won't be called. In turn the clock comparator won't be
reprogrammed and therefore the interrupt condition stays pending which
causes an interrupt loop until the expected time is reached.

On NOHZ machines this can result in unresponsive machines since the
time of the next expected interrupted can be a couple of days in the
future.

To fix this just revalidate the clock comparator register with the
expected value.
In addition the special handling for udelay must be changed as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Provide arch specific mdelay implementation.

Use an own implementation instead of the common code udelay loop.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Fix enabled udelay for short delays.

When udelay() gets called with a delay that would expire before the
next clock event it reprograms the clock comparator.
When the interrupt happens the clock comparator won't be resetted
therefore the interrupt condition doesn't get cleared.
The result is an endless timer interrupt loop until the next clock
event would expire (stored in lowcore).
So udelay() usually would wait much longer for small delays than it
should.

Fix this by disabling the local tick which makes sure that the clock
comparator will be resetted when a timer interrupt happens.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] udelay: disable lockdep to avoid false positives

Our udelay implementation enables interrupts to receive a special timer
interrupt regardless of the context it is called from.
This might lead to false positive lockdep reports. Since lockdep isn't
aware of the fact that only a single interrupt source is enabled it
warns about possible deadlocks that in reality won't happen, like
the one below.
To fix this disable lockdep before enabling interrupts.

[ 254.040888] =================================
[ 254.040904] [ INFO: inconsistent lock state ]
[ 254.040910] 2.6.30 #9
[ 254.040914] ---------------------------------
[ 254.040920] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 254.040927] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 254.040934] (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.040961] {IN-HARDIRQ-W} state was registered at:
[ 254.040969] [<0000000000096f74>] __lock_acquire+0x9d4/0x188c
[ 254.040985] [<0000000000097f68>] lock_acquire+0x13c/0x16c
[ 254.040998] [<00000000004527e0>] _spin_lock+0x74/0xb8
[ 254.041016] [<0000000000457eb2>] do_IRQ+0xde/0x208
[ 254.041031] [<000000000002d190>] io_return+0x0/0x8
[ 254.041049] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041066] irq event stamp: 259629
[ 254.041076] hardirqs last enabled at (259628): [<000000000045238e>] _spin_unlock_irq+0x5e/0x9c
[ 254.041095] hardirqs last disabled at (259629): [<000000000045292e>] _spin_lock_irq+0x4a/0xc4
[ 254.041126] softirqs last enabled at (259614): [<000000000006500e>] __do_softirq+0x296/0x2b0
[ 254.041137] softirqs last disabled at (259619): [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041147]
[ 254.041148] other info that might help us debug this:
[ 254.041153] 2 locks held by swapper/0:
[ 254.041157] #0: (&priv->timer){+.-...}, at: [<000000000006bf9a>] run_timer_softirq+0x19a/0x340
[ 254.041170] #1: (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.041182]
[ 254.041310] Call Trace:
[ 254.041313] ([<00000000000174fc>] show_trace+0x16c/0x170)
[ 254.041321] [<0000000000017578>] show_stack+0x78/0x104
[ 254.041327] [<000000000044d0ca>] dump_stack+0xc6/0xd4
[ 254.041342] [<00000000000949b4>] print_usage_bug+0x1c8/0x1fc
[ 254.041353] [<0000000000094e8a>] mark_lock+0x4a2/0x670
[ 254.041364] [<00000000000950e2>] mark_held_locks+0x8a/0xb4
[ 254.041375] [<0000000000095398>] trace_hardirqs_on_caller+0x74/0x1ac
[ 254.041388] [<00000000000954fa>] trace_hardirqs_on+0x2a/0x38
[ 254.041402] [<000000000025f1ec>] __udelay_disabled+0xac/0xfc
[ 254.041419] [<000000000025f432>] __udelay+0x12a/0x148
[ 254.041433] [<00000000002d64d8>] cio_commit_config+0x170/0x290
[ 254.041451] [<00000000002d6978>] cio_disable_subchannel+0x120/0x1cc
[ 254.041468] [<00000000002e32a4>] ccw_device_recog_done+0x54/0x2f4
[ 254.041485] [<00000000002e3638>] ccw_device_sense_id_done+0x50/0x90
[ 254.041508] [<00000000002e615a>] snsid_callback+0xfa/0x3a8
[ 254.041515] [<00000000002dd96c>] ccwreq_stop+0x80/0x90
[ 254.041523] [<00000000002dda8e>] ccw_request_timeout+0xc2/0xd0
[ 254.041530] [<00000000002e2f70>] ccw_device_request_event+0x58/0x90
[ 254.041537] [<00000000002e47ae>] ccw_device_timeout+0x7e/0x2f0
[ 254.041555] [<000000000006c02a>] run_timer_softirq+0x22a/0x340
[ 254.041566] [<0000000000064eb0>] __do_softirq+0x138/0x2b0
[ 254.041578] [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041590] [<00000000000647ce>] irq_exit+0xee/0x114
[ 254.041603] [<0000000000457d88>] do_extint+0x130/0x17c
[ 254.041617] [<000000000002d41e>] ext_no_vtime+0x1e/0x22
[ 254.041631] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041646] ([<0000000000029f58>] vtime_stop_cpu+0x6c/0x114)
[ 254.041662] [<000000000001d842>] cpu_idle+0x122/0x1c0
[ 254.041679] [<00000000004482c6>] start_secondary+0xce/0xe0
[ 254.041696] [<0000000000000000>] 0x0
[ 254.041715] [<0000000000000000>] 0x0
[ 254.041745] INFO: lockdep is turned off.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] move EXPORT_SYMBOLs to definitions

Move all EXPORT_SYMBOLs to their corresponding definitions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Move private simple udelay function to arch/s390/lib/delay.c.

Move cio's private simple udelay function to lib/delay.c and turn it
into something much more readable. So we have all implementations
at one place.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] nohz: Fix __udelay.

This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691
("[S390] nohz/sclp: disable timer on synchronous waits.").
If udelay() gets called from a disabled context it sets the clock comparator
to a value where it expects the next interrupt. When the interrupt happens
the clock comparator gets not reset and therefore the interrupt condition
doesn't get cleared. The result is an endless timer interrupt loop.

In addition this patch fixes also the following:

rcutorture reveals that our __udelay implementation is still buggy,
since it might schedule tasklets, but prevents their execution:

NOHZ: local_softirq_pending 42
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 142
NOHZ: local_softirq_pending 02

To fix this we make sure that only the clock comparator interrupt
is enabled when the enabled wait psw is loaded.
Also no code gets called anymore which might schedule tasklets.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] nohz/sclp: disable timer on synchronous waits.

sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Convert s390 to GENERIC_CLOCKEVENTS.

This way we get rid of s390's NO_IDLE_HZ and use the generic dynticks
variant instead. In addition we get high resolution timers for free.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

[S390] prevent softirqs if delay is called disabled

The new delay implementation uses the clock comparator and an external
interrupt even if it is called disabled for interrupts. To do this
all external interrupt source except clock comparator are switched of
before enabling external interrupts. The external interrupt at the
end of the delay period may not execute softirqs or we can end up in a
dead-lock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] ETR support.

This patch adds support for clock synchronization to an external time
reference (ETR). The external time reference sends an oscillator
signal and a synchronization signal every 2^20 microseconds to keep
the TOD clocks of all connected servers in sync. For availability
two ETR units can be connected to a machine. If the clock deviates
for more than the sync-check tolerance all cpus get a machine check
that indicates that the clock is out of sync. For the lovely details
how to get the clock back in sync see the code below.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] Inline assembly cleanup.

Major cleanup of all s390 inline assemblies. They now have a common
coding style. Quite a few have been shortened, mainly by using register
asm variables. Use of the EX_TABLE macro helps as well. The atomic ops,
bit ops and locking inlines new use the Q-constraint if a newer gcc
is used. That results in slightly better code.

Thanks to Christian Borntraeger for proof reading the changes.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

[PATCH] s390: fix __delay implementation

Fix __delay implementation. Called with an argument "1" or "0" it would
loop nearly forever (since (1/2)-1 = 0xffffffff).

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!