#
6695d792 |
|
04-Feb-2024 |
Ricardo B. Marliere <ricardo@marliere.net> |
s390/time: make stp_subsys const Now that the driver core can properly handle constant struct bus_type, move the stp_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240204-bus_cleanup-s390_time-v1-1-d2120156982a@marliere.net Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
fc17e992 |
|
14-Sep-2023 |
Sven Schnelle <svens@linux.ibm.com> |
s390/time: improve steering precision The common timekeeping code steers the clock by adjusting the multiplier value of the clock. With the current value of 1000 precision is lost when the clock is steered with a userspace daemon. Increase the multiplier and the shift values to increase precision. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
99441a38 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390: use control register bit defines Use control register bit defines instead of plain numbers where possible. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
8d5e98f8 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ctlreg: add local and system prefix to some functions Add local and system prefix to some functions to clarify they change control register contents on either the local CPU or the on all CPUs. This results in the following API: Two defines which load and save multiple control registers. The defines correlate with the following C prototypes: void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high); void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high); Two functions which locally set or clear one bit for a specified control register: void local_ctl_set_bit(unsigned int cr, unsigned int bit); void local_ctl_clear_bit(unsigned int cr, unsigned int bit); Two functions which set or clear one bit for a specified control register on all CPUs: void system_ctl_set_bit(unsigned int cr, unsigned int bit); void system_ctl_clear_bit(unsigend int cr, unsigned int bit); Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
cada938a |
|
28-Jun-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390: fix various typos Fix various typos found with codespell. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
#
91b41a23 |
|
18-May-2023 |
Peter Zijlstra <peterz@infradead.org> |
s390/time: Provide sched_clock_noinstr() With the intent to provide local_clock_noinstr(), a variant of local_clock() that's safe to be called from noinstr code (with the assumption that any such code will already be non-preemptible), prepare for things by providing a noinstr sched_clock_noinstr() function. Specifically, preempt_enable_*() calls out to schedule(), which upsets noinstr validation efforts. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V Link: https://lore.kernel.org/r/20230519102715.570170436@infradead.org
|
#
5ace65eb |
|
03-May-2022 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: clock_delta should be signed clock_delta is declared as unsigned long in various places. However, the clock sync delta can be negative. This would add a huge positive offset in clock_sync_global where clock_delta is added to clk.eitod which is a 72 bit integer. Declare it as signed long to fix this. Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
03780c83 |
|
02-May-2022 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: fix todoff size The size of the TOD offset field in the stp info response is 64 bits. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
5b43bd18 |
|
24-Mar-2021 |
Heiko Carstens <hca@linux.ibm.com> |
s390/vdso: fix initializing and updating of vdso_data Li Wang reported that clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values when time is provided via vdso instead of system call: vdso_ts_nsec = 4484351380985507, vdso_ts.tv_sec = 4484351, vdso_ts.tv_nsec = 380985507 sys_ts_nsec = 1446923235377, sys_ts.tv_sec = 1446, sys_ts.tv_nsec = 923235377 Within the s390 specific vdso function __arch_get_hw_counter() reads tod clock steering values from the arch_data member of the passed in vdso_data structure. Problem is that only for the CS_HRES_COARSE vdso_data arch_data is initialized and gets updated. The CS_RAW specific vdso_data does not contain any valid tod_clock_steering information, which explains the different values. Fix this by initializing and updating all vdso_datas. Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Fixes: 1ba2d6c0fd4e ("s390/vdso: simplify __arch_get_hw_counter()") Link: https://lore.kernel.org/linux-s390/YFnxr1ZlMIOIqjfq@osiris Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
72bbc226 |
|
23-Mar-2021 |
Heiko Carstens <hca@linux.ibm.com> |
s390/vdso: copy tod_steering_delta value to vdso_data page When converting the vdso assembler code to C it was forgotten to actually copy the tod_steering_delta value to vdso_data page. Which in turn means that tod clock steering will not work correctly. Fix this by simply copying the value whenever it is updated. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Cc: <stable@vger.kernel.org> # 5.10 Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
eba8e1af |
|
23-Feb-2021 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time,idle: get rid of unsigned long long Get rid of unsigned long long, and use unsigned long instead everywhere. The usage of unsigned long long is a leftover from 31 bit kernel support. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
f8d8977a |
|
08-Feb-2021 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: convert tod_clock_base to union Convert tod_clock_base to union tod_clock. This simplifies quite a bit of code and also fixes a bug in read_persistent_clock64(); void read_persistent_clock64(struct timespec64 *ts) { __u64 delta; delta = initial_leap_seconds + TOD_UNIX_EPOCH; get_tod_clock_ext(clk); *(__u64 *) &clk[1] -= delta; if (*(__u64 *) &clk[1] > delta) clk[0]--; ext_to_timespec64(clk, ts); } Assume &clk[1] == 3 and delta == 2; then after the substraction the if condition becomes true and the epoch part of the clock is decremented by one because of an assumed overflow, even though there is none. Fix this by using 128 bit arithmetics and let the compiler do the right thing: void read_persistent_clock64(struct timespec64 *ts) { union tod_clock clk; u64 delta; delta = initial_leap_seconds + TOD_UNIX_EPOCH; store_tod_clock_ext(&clk); clk.eitod -= delta; ext_to_timespec64(&clk, ts); } Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
074ff04e |
|
11-Nov-2020 |
Julian Wiedmann <jwi@linux.ibm.com> |
s390/stp: let subsys_system_register() sysfs attributes Instead of creating the sysfs attributes for the stp root_dev by hand, pass them to subsys_system_register() as parameter. This also ensures that the attributes are available when the KOBJ_ADD event is raised. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
ad5ceb33 |
|
21-Sep-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: unify stp_work_mutex and clock_sync_mutex No need to have two mutexes, and while at it rename it to stp_mutex. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
4fb53dde |
|
17-Jun-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: add sysfs file to show scheduled leap seconds This patch introduces /sys/devices/system/stp/scheduled_leap_seconds, which will contain either 0,0 if no leap second is scheduled, or the UTC timestamp + leap second offset. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
b2539aa0 |
|
11-Jun-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: add support for leap seconds In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
b3bd0249 |
|
15-Sep-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: add locking to sysfs functions The sysfs function might race with stp_work_fn. To prevent that, add the required locking. Another issue is that the sysfs functions are checking the stp_online flag, but this flag just holds the user setting whether STP is enabled. Add a flag to clock_sync_flag whether stp_info holds valid data and use that instead. Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
4bff8cb5 |
|
28-Apr-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390: convert to GENERIC_VDSO Convert s390 to generic vDSO. There are a few special things on s390: - vDSO can be called without a stack frame - glibc did this in the past. So we need to allocate a stackframe on our own. - The former assembly code used stcke to get the TOD clock and applied time steering to it. We need to do the same in the new code. This is done in the architecture specific __arch_get_hw_counter function. The steering information is stored in an architecure specific area in the vDSO data. - CPUCLOCK_VIRT is now handled with a syscall fallback, which might be slower/less accurate than the old implementation. The getcpu() function stays as an assembly function because there is no generic implementation and the code is just a few lines. Performance number from my system do 100 mio gettimeofday() calls: Plain syscall: 8.6s Generic VDSO: 1.3s old ASM VDSO: 1s So it's a bit slower but still much faster than syscalls. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
41115582 |
|
20-Jul-2020 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: improve comparison for tod steering It doesn't make sense to add zero shifted by 15. It's still zero. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
58e15716 |
|
20-Jul-2020 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: use CLOCKSOURCE_MASK Make use of CLOCKSOURCE_MASK instead of open-coding it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
66a049b7 |
|
25-Jun-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/stp: allow group and users to read stp sysfs files There are no secrets in these files, so allow all users to read it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
0188d08a |
|
12-Jun-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390: convert to msecs_to_jiffies() Instead of using the old 'jiffies + HZ {/,*} something' calculation use msecs_to_jiffies() as that makes the code more readable. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
478237a5 |
|
23-Mar-2020 |
Vincenzo Frascino <vincenzo.frascino@arm.com> |
s390/vdso: fix vDSO clock_getres() clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the s390 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [heiko.carstens@de.ibm.com: use llgf for proper zero extension] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
f653e29b |
|
28-Oct-2019 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: remove monotonic_clock() Remove unused monotonic_clock() function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
00067a6d |
|
19-Jul-2018 |
Pavel Tatashin <pasha.tatashin@oracle.com> |
s390/time: Remove read_boot_clock64() read_boot_clock64() was replaced by read_persistent_wall_and_boot_offset() so remove it. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-18-pasha.tatashin@oracle.com
|
#
be2e0e42 |
|
19-Jul-2018 |
Pavel Tatashin <pasha.tatashin@oracle.com> |
s390/time: Add read_persistent_wall_and_boot_offset() read_persistent_wall_and_boot_offset() will replace read_boot_clock64() because on some architectures it is more convenient to read both sources as one may depend on the other. For s390, implementation is the same as read_boot_clock64() but also calling and returning value of read_persistent_clock64() Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-15-pasha.tatashin@oracle.com
|
#
a17ae4c3 |
|
24-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
s390: kernel: add SPDX identifiers to the remaining files It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the arch/s390/kernel/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
e99e88a9 |
|
16-Oct-2017 |
Kees Cook <keescook@chromium.org> |
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
7bf76f01 |
|
15-Aug-2017 |
Jan Höppner <hoeppner@linux.vnet.ibm.com> |
s390/dasd: Change unsigned long long to unsigned long Unsigned long long and unsigned long were different in size for 31-bit. For 64-bit the size for both datatypes is 8 Bytes and since the support for 31-bit is long gone we can clean up a little and change everything to unsigned long. Change get_phys_clock() along the way to accept unsigned long as well so that the DASD code can be consistent. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
6e2ef5e4 |
|
26-Oct-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: add support for the TOD clock epoch extension The TOD epoch extension adds 8 epoch bits to the TOD clock to provide a continuous clock after 2042/09/17. The store-clock-extended (STCKE) instruction will store the epoch index in the first byte of the 16 bytes stored by the instruction. The read_boot_clock64 and the read_presistent_clock64 functions need to take the additional bits into account to give the correct result after 2042/09/17. The clock-comparator register will stay 64 bit wide. The comparison of the clock-comparator with the TOD clock is limited to bytes 1 to 8 of the extended TOD format. To deal with the overflow problem due to an epoch change the clock-comparator sign control in CR0 can be used to switch the comparison of the 64-bit TOD clock with the clock-comparator to a signed comparison. The decision between the signed vs. unsigned clock-comparator comparisons is done at boot time. Only if the TOD clock is in the second half of a 142 year epoch the signed comparison is used. This solves the epoch overflow issue as long as the machine is booted at least once in an epoch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2337e879 |
|
24-May-2017 |
Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
s390/kernel: Use stop_machine_cpuslocked() stp_work_fn() holds get_online_cpus() while invoking stop_machine(). stop_machine() invokes get_online_cpus() as well. This is correct, but prevents the conversion of the hotplug locking to a percpu rwsem. Use stop_machine_cpuslocked() to avoid the nested call. Convert *_online_cpus() to the new interfaces while at it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20170524081548.250203087@linutronix.de
|
#
06c54611 |
|
30-Mar-2017 |
Nicolai Stange <nicstange@gmail.com> |
s390/time: Set ->min_delta_ticks and ->max_delta_ticks In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Currently, the s390's CPU timer clockevent device is initialized as follows: cd->min_delta_ns = 1; cd->max_delta_ns = LONG_MAX; Note that the device's time to cycle conversion factor, i.e. cd->mult / (2^cd->shift), is approx. equal to 4. Hence, this would translate to cd->min_delta_ticks = 4; cd->max_delta_ticks = 4 * LONG_MAX; However, a minimum value of 1ns is in the range of noise anyway and the clockevent core will take care of this by increasing it to 1us or so. Furthermore, 4*LONG_MAX would overflow the unsigned long argument the clockevent devices gets programmed with. Thus, initialize ->min_delta_ticks with 1 and ->max_delta_ticks with ULONG_MAX. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from this driver. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
e6017571 |
|
01-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
3994a52b |
|
09-Feb-2017 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
s390: kernel: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
ea417aa8 |
|
16-Nov-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/debug: make debug event time stamps relative to the boot TOD clock The debug features currently uses absolute TOD time stamps for the debug events. Given that the TOD clock can jump forward and backward due to STP sync checks the order of debug events can get obfuscated. Replace the absolute TOD time stamps with a delta to the IPL time stamp. On a STP sync check the TOD clock correction is added to the IPL time stamp as well to make the deltas unaffected by STP sync check. The readout of the debug feature entries will convert the deltas back to absolute time stamps based on the Unix epoch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
970ba6ac |
|
02-Jan-2017 |
Heiko Carstens <hca@linux.ibm.com> |
s390: use false/true when using bool Yet another trivial patch to reduce the noise that coccinelle generates. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a5a1d1c2 |
|
21-Dec-2016 |
Thomas Gleixner <tglx@linutronix.de> |
clocksource: Use a plain u64 instead of cycle_t There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
|
#
7c0f6ba6 |
|
24-Dec-2016 |
Linus Torvalds <torvalds@linux-foundation.org> |
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
191ce9d1 |
|
16-Nov-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: fix clocksource steering for negative clock offsets The TOD clock offset injected by an STP sync check can be negative. If the resulting total tod_steering_delta gets negative the kernel will panic. Change the type of tod_steering_delta to a signed type. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 75c7b6f3f6ba ("s390/time: steer clocksource on STP sync events") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
75c7b6f3 |
|
10-Oct-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: steer clocksource on STP sync events On STP sync events the TOD clock will jump in time, either forward or backward. The TOD clocksource claims to be continuous but in case of an STP sync with a negative offset it is not. Subtract the offset injected by the STP sync check from the result of the TOD clocksource to make it continuous again. Add code to drift the offset towards zero with a fixed rate, steering 1 second in ~9 hours. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2ace06ec |
|
09-Oct-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: adjust last_update_clock at clock synchronization The last_update_clock time stamp in the lowcore should be adjusted by the TOD clock delta that is created by the clock synchronization. Otherwise the calculation of the steal time will be incorrect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b1c0854d |
|
10-Oct-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: refactor clock sync Merge clock_sync_cpu into stp_sync_clock and split out the update of the global and per-CPU clock fields into clock_sync_global and clock_sync_local. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
67f03de5 |
|
18-Jul-2016 |
David Hildenbrand <dahi@linux.vnet.ibm.com> |
s390/time: avoid races when updating tb_update_count The increment might not be atomic and we're not holding the timekeeper_lock. Therefore we might lose an update to count, resulting in VDSO being trapped in a loop. As other archs also simply update the values and count doesn't seem to have an impact on reloading of these values in VDSO code, let's just remove the update of tb_update_count. Suggested-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0c00b1e0 |
|
14-Jul-2016 |
David Hildenbrand <dahi@linux.vnet.ibm.com> |
s390/time: fixup the clock comparator on all cpus By leaving fixup_cc unset, only the clock comparator of the cpu actually doing the sync is fixed up until now. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
ca64f639 |
|
14-Jul-2016 |
David Hildenbrand <dahi@linux.vnet.ibm.com> |
s390/time: cleanup etr leftovers There are still some etr leftovers and wrong comments, let's clean that up. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
41ad0220 |
|
14-Jul-2016 |
David Hildenbrand <dahi@linux.vnet.ibm.com> |
s390/time: simplify stp time syncs The way we call do_adjtimex() today is broken. It has 0 effect, as ADJ_OFFSET_SINGLESHOT (0x0001) in the kernel maps to !ADJ_ADJTIME (in contrast to user space where it maps to ADJ_OFFSET_SINGLESHOT | ADJ_ADJTIME - 0x8001). !ADJ_ADJTIME will silently ignore all adjustments without STA_PLL being active. We could switch to ADJ_ADJTIME or turn STA_PLL on, but still we would run into some problems: - Even when switching to nanoseconds, we lose accuracy. - Successive calls to do_adjtimex() will simply overwrite any leftovers from the previous call (if not fully handled) - Anything that NTP does using the sysctl heavily interferes with our use. - !ADJ_ADJTIME will silently round stuff > or < than 0.5 seconds Reusing do_adjtimex() here just feels wrong. The whole STP synchronization works right now *somehow* only, as do_adjtimex() does nothing and our TOD clock jumps in time, although it shouldn't. This is especially bad as the clock could jump backwards in time. We will have to find another way to fix this up. As leap seconds are also not properly handled yet, let's just get rid of all this complex logic altogether and use the correct clock_delta for fixing up the clock comparator and keeping the sched_clock monotonic. This change should have 0 effect on the current STP mechanism. Once we know how to best handle sync events and leap second updates, we'll start with a fresh implementation. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
fd5ada04 |
|
31-May-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: remove ETR support The External-Time-Reference (ETR) clock synchronization interface has been superseded by Server-Time-Protocol (STP). Remove the outdated ETR interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
936cc855 |
|
30-May-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: add leap seconds to initial system time The PTFF instruction can be used to retrieve information about UTC including the current number of leap seconds. Use this value to convert the coordinated server time value of the TOD clock to a proper UTC timestamp to initialize the system time. Without this correction the system time will be off by the number of leap seonds until it has been corrected via NTP. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
40277891 |
|
31-May-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: LPAR offset handling It is possible to specify a user offset for the TOD clock, e.g. +2 hours. The TOD clock will carry this offset even if the clock is synchronized with STP. This makes the time stamps acquired with get_sync_clock() useless as another LPAR migth use a different TOD offset. Use the PTFF instrution to get the TOD epoch difference and subtract it from the TOD clock value to get a physical timestamp. As the epoch difference contains the sync check delta as well the LPAR offset value to the physical clock needs to be refreshed after each clock synchronization. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2f82f577 |
|
31-May-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: STP sync clock correction The sync clock operation of the channel subsystem call for STP delivers the TOD clock difference as a result. Use this TOD clock difference instead of the difference between the TOD timestamps before and after the sync clock operation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
4cc7ecb7 |
|
17-Mar-2016 |
Kees Cook <keescook@chromium.org> |
param: convert some "on"/"off" users to strtobool This changes several users of manual "on"/"off" parsing to use strtobool. Some side-effects: - these uses will now parse y/n/1/0 meaningfully too - the early_param uses will now bubble up parse errors Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Joe Perches <joe@perches.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Steve French <sfrench@samba.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
baebc70a |
|
03-Mar-2016 |
Joe Perches <joe@perches.com> |
s390: Use pr_warn instead of pr_warning Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
29b0a825 |
|
09-Oct-2015 |
Heiko Carstens <hca@linux.ibm.com> |
s390/etr,stp: fix possible deadlock on machine check The first level machine check handler for etr and stp machine checks may call queue_work() while in nmi context. This may deadlock e.g. if the machine check happened when the interrupted context did hold a lock, that also will be acquired by queue_work(). Therefore split etr and stp machine check handling into first and second level handling. The second level handling will then issue the queue_work() call in process context which avoids the potential deadlock. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
07aeed3f |
|
16-Jul-2015 |
Viresh Kumar <viresh.kumar@linaro.org> |
s390/time: Migrate to new 'set-state' interface Migrate s390 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
#
fdf03650 |
|
13-May-2015 |
Fan Zhang <zhangfan@linux.vnet.ibm.com> |
KVM: s390: host STP toleration for VMs If the host has STP enabled, the TOD of the host will be changed during synchronization phases. These are performed during a stop_machine() call. As the guest TOD is based on the host TOD, we have to make sure that: - no VCPU is in the SIE (implicitly guaranteed via stop_machine()) - manual guest TOD calculations are not affected "Epoch" is the guest TOD clock delta to the host TOD clock. We have to adjust that value during the STP synchronization and make sure that code that accesses the epoch won't get interrupted in between (via disabling preemption). Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
#
805de8f4 |
|
23-Apr-2015 |
Peter Zijlstra <peterz@infradead.org> |
atomic: Replace atomic_{set,clear}_mask() usage Replace the deprecated atomic_{set,clear}_mask() usage with the now ubiquous atomic_{or,andnot}() functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
689911c7 |
|
08-Apr-2015 |
Xunlei Pang <pang.xunlei@linaro.org> |
s390: time: Provide read_boot_clock64() and read_persistent_clock64() As part of addressing the "y2038 problem" for in-kernel uses, this patch converts read_boot_clock() to read_boot_clock64() and read_persistent_clock() to read_persistent_clock64() using timespec64. Rename some instances of 'timespec' to 'timespec64' in time.c and related references Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> [jstultz: Fixed minor style and grammer tweaks pointed out by Ingo] Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
876e7881 |
|
19-Mar-2015 |
Peter Zijlstra <peterz@infradead.org> |
time: Rename timekeeper::tkr to timekeeper::tkr_mono In preparation of adding another tkr field, rename this one to tkr_mono. Also rename tk_read_base::base_mono to tk_read_base::base, since the structure is not specific to CLOCK_MONOTONIC and the mono name got added to the tk_read_base instance. Lots of trivial churn. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150319093400.344679419@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
f8935983 |
|
11-Mar-2015 |
John Stultz <john.stultz@linaro.org> |
clocksource: Mostly kill clocksource_register() A long running project has been to clean up remaining uses of clocksource_register(), replacing it with the simpler clocksource_register_khz/hz() functions. However, there are a few cases where we need to self-define our mult/shift values, so switch the function to a more obviously internal __clocksource_register() name, and consolidate much of the internal logic so we don't have duplication. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1426133800-29329-10-git-send-email-john.stultz@linaro.org [ Minor cleanups. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
7a5388de |
|
21-Oct-2014 |
Heiko Carstens <hca@linux.ibm.com> |
s390/kprobes: make use of NOKPROBE_SYMBOL() Use NOKPROBE_SYMBOL() instead of __kprobes annotation. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b7eacb59 |
|
28-Aug-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/vdso: add vdso support for coarse clocks Add CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE optimization to the 64-bit and 31-bit vdso. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
eb7e7d76 |
|
16-Aug-2014 |
Christoph Lameter <cl@linux.com> |
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
|
#
d28ede83 |
|
16-Jul-2014 |
Thomas Gleixner <tglx@linutronix.de> |
timekeeping: Create struct tk_read_base and use it in struct timekeeper The members of the new struct are the required ones for the new NMI safe accessor to clcok monotonic. In order to reuse the existing timekeeping code and to make the update of the fast NMI safe timekeepers a simple memcpy use the struct for the timekeeper as well and convert all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
4a0e6377 |
|
16-Jul-2014 |
Thomas Gleixner <tglx@linutronix.de> |
clocksource: Get rid of cycle_last cycle_last was added to the clocksource to support the TSC validation. We moved that to the core code, so we can get rid of the extra copy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
b6f42962 |
|
20-May-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall Analog to git commit 28b92e09e25bdc0ae864b22eacf195a74f861389 first cast tk->wall_to_monotonic.tv_nsec to u64 before doing the shift with tk->shift to avoid loosing relevant bits on a 32-bit kernel. Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
1dad093b |
|
31-Mar-2014 |
Thomas Huth <thuth@linux.vnet.ibm.com> |
s390/irq: Use defines for external interruption codes Use the new defines for external interruption codes to get rid of "magic" numbers in the s390 source code. And while we're at it, also rename the (un-)register_external_interrupt function to something shorter so that this patch does not exceed the 80 columns all over the place. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
8adbf78e |
|
21-Nov-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390,time: revert direct ktime path for s390 clockevent device Git commit 4f37a68cdaf6dea833cfdded2a3e0c47c0f006da "s390: Use direct ktime path for s390 clockevent device" makes use of the CLOCK_EVT_FEAT_KTIME clockevent option to avoid the delta calculation with ktime_get() in clockevents_program_event and the get_tod_clock() in s390_next_event. This is based on the assumption that the difference between the internal ktime and the hardware clock is reflected in the wall_to_monotonic delta. But this is not true, the ntp corrections are applied via changes to the tk->mult multiplier and this is not reflected in wall_to_monotonic. In theory this could be solved by using the raw monotonic clock but it is simpler to switch back to the standard clock delta calculation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
79c74ecb |
|
22-Nov-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time,vdso: convert to the new update_vsyscall interface Switch to the improved update_vsyscall interface that provides sub-nanosecond precision for gettimeofday and clock_gettime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0587d409 |
|
23-Aug-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/time: return with irqs disabled from psw_idle Modify the psw_idle waiting logic in entry[64].S to return with interrupts disabled. This avoids potential issues with udelay and interrupt loops as interrupts are not reenabled after clock comparator interrupts. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
1aae0560 |
|
30-Jan-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: rename tod clock access functions Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d911e03d |
|
29-Jan-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390/timer: avoid overflow when programming clock comparator Since ed4f209 "s390/time: fix sched_clock() overflow" a new helper function is used to avoid overflows when converting TOD format values to nanosecond values. The kvm interrupt code formerly however only worked by accident because of an overflow. It tried to program a timer that would expire in more than ~29 years. Because of the old TOD-to-nanoseconds overflow bug the real expiry value however was much smaller, but now it isn't anymore. This however triggers yet another bug in the function that programs the clock comparator s390_next_ktime(): if the absolute "expires" value is after 2042 this will result in an overflow and the programmed value is lower than the current TOD value which immediatly triggers a clock comparator (= timer) interrupt. Since the timer isn't expired it will be programmed immediately again and so on... the result is a dead system. To fix this simply program the maximum possible value if an overflow is detected. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
ed4f2094 |
|
14-Jan-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390/time: fix sched_clock() overflow Converting a 64 Bit TOD format value to nanoseconds means that the value must be divided by 4.096. In order to achieve that we multiply with 125 and divide by 512. When used within sched_clock() this triggers an overflow after appr. 417 days. Resulting in a sched_clock() return value that is much smaller than previously and therefore may cause all sort of weird things in subsystems that rely on a monotonic sched_clock() behaviour. To fix this implement a tod_to_ns() helper function which converts TOD values without overflow and call this function from both places that open coded the conversion: sched_clock() and kvm_s390_handle_wait(). Cc: stable@kernel.org Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
420f42ec |
|
02-Jan-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390/irq: remove split irq fields from /proc/stat Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a8f6db4d |
|
06-Sep-2012 |
Heiko Carstens <hca@linux.ibm.com> |
s390/etr,stp: use -EOPNOTSUPP instead of -ENOSYS Change -ENOSYS to -EOPNOTSUPP. Return value is used only internally. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
70639421 |
|
04-Sep-2012 |
John Stultz <john.stultz@linaro.org> |
time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD To help migrate archtectures over to the new update_vsyscall method, redfine CONFIG_GENERIC_TIME_VSYSCALL as CONFIG_GENERIC_TIME_VSYSCALL_OLD Cc: Tony Luck <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
189374ae |
|
04-Sep-2012 |
John Stultz <john.stultz@linaro.org> |
time: Move update_vsyscall definitions to timekeeper_internal.h Since users will need to include timekeeper_internal.h, move update_vsyscall definitions to timekeeper_internal.h. Cc: Tony Luck <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
|
#
27f6b416 |
|
20-Jul-2012 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a53c8fab |
|
20-Jul-2012 |
Heiko Carstens <hca@linux.ibm.com> |
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
fde15c3a |
|
11-Mar-2012 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] irq: external interrupt code passing The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
cf1eb40f |
|
17-Feb-2012 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] correct ktime to tod clock comparator conversion The conversion of the ktime to a value suitable for the clock comparator does not take changes to wall_to_monotonic into account. In fact the conversion just needs the boot clock (sched_clock_base_cc) and the total_sleep_time. This is applicable to 3.2+ kernels. CC: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
3fbacffb |
|
21-Dec-2011 |
Kay Sievers <kay.sievers@vrfy.org> |
s390: time - convert sysdev_class to a regular subsystem After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
638ad34a |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] sparse: fix sparse warnings about missing prototypes Add prototypes and includes for functions used in different modules. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
e35f95b3 |
|
22-Sep-2011 |
Heiko Carstens <hca@linux.ibm.com> |
time, s390: Get rid of compile warning "s390: Use direct ktime path for s390 clockevent device" in linux-next introduces this compile warning: arch/s390/kernel/time.c: In function 's390_next_ktime': arch/s390/kernel/time.c:118:2: warning: comparison of distinct pointer types lacks a cast [enabled by default] Just use a u64 instead of an s64 variable. This is not a problem since it will always contain a positive value. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/1316675957-5538-1-git-send-email-heiko.carstens@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
4f37a68c |
|
23-Aug-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: Use direct ktime path for s390 clockevent device The clock comparator on s390 uses the same format as the TOD clock. If the value in the clock comparator is smaller than the current TOD value an interrupt is pending. Use the CLOCK_EVT_FEAT_KTIME feature to get the unmodified ktime of the next clockevent expiration and use it to program the clock comparator without querying the TOD clock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20110823133143.153017933@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
d7b250e2 |
|
26-May-2011 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] irq: merge irq.c and s390_ext.c Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0f1959f5 |
|
23-May-2011 |
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> |
[S390] convert old cpumask API into new one Adapt new API. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
25985edc |
|
30-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
#
052ff461 |
|
04-Jan-2011 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] irq: have detailed statistics for interrupt types Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
860dba45 |
|
04-Jan-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
f6649a7e |
|
25-Oct-2010 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] cleanup lowcore access from external interrupts Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
33fea794 |
|
27-Jul-2010 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] etr: fix clock synchronization race The etr events switch-to-local and sync-check disable the synchronous clock and schedule a work queue that tries to get the clock back into sync. If another switch-to-local or sync-check event occurs while the work queue function etr_work_fn still runs the eacr.es bit and the clock_sync_word can become inconsistent because check_sync_clock only uses the clock_sync_word to determine if the clock is in sync or not. The second pass of the etr_work_fn will reset the eacr.es bit but will leave the clock_sync_word intact. Fix this race by moving the reset of the eacr.es bit into the switch-to-local and sync-check functions and by checking the eacr.es bit as well to decide if the clock needs to be synced. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
7615856e |
|
13-Jul-2010 |
John Stultz <johnstul@us.ibm.com> |
timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset update_vsyscall() did not provide the wall_to_monotoinc offset, so arch specific implementations tend to reference wall_to_monotonic directly. This limits future cleanups in the timekeeping core, so this patch fixes the update_vsyscall interface to provide wall_to_monotonic, allowing wall_to_monotonic to be made static as planned in Documentation/feature-removal-schedule.txt Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tony Luck <tony.luck@intel.com> LKML-Reference: <1279068988-21864-7-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
3fc1f1e2 |
|
06-May-2010 |
Tejun Heo <tj@kernel.org> |
stop_machine: reimplement using cpu_stop Reimplement stop_machine using cpu_stop. As cpu stoppers are guaranteed to be available for all online cpus, stop_machine_create/destroy() are no longer necessary and removed. With resource management and synchronization handled by cpu_stop, the new implementation is much simpler. Asking the cpu_stop to execute the stop_cpu() state machine on all online cpus with cpu hotplug disabled is enough. stop_machine itself doesn't need to manage any global resources anymore, so all per-instance information is rolled into struct stop_machine_data and the mutex and all static data variables are removed. The previous implementation created and destroyed RT workqueues as necessary which made stop_machine() calls highly expensive on very large machines. According to Dimitri Sivanich, preventing the dynamic creation/destruction makes booting faster more than twice on very large machines. cpu_stop resources are preallocated for all online cpus and should have the same effect. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com>
|
#
157a1a27 |
|
22-Apr-2010 |
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
[S390] vdso: use ntp adjusted clock multiplier Commit "timekeeping: Fix clock_gettime vsyscall time warp" (0696b711e) introduced the new parameter "mult" to update_vsyscall(). This parameter contains the internal NTP adjusted clock multiplier. The s390x vdso did not use this adjusted multiplier. Instead, it used the constant clock multiplier for gettimeofday() and clock_gettime() variants. This may result in observable time warps as explained in commit 0696b711e. Make the NTP adjusted clock multiplier available to the s390x vdso implementation and use it for time calculations. Cc: <stable@kernel.org> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
b1e2ba8d |
|
07-Mar-2010 |
John Stultz <johnstul@us.ibm.com> |
[S390] Cleanup xtime usage This replaces direct xtime usage in the s390 arch with timekeeping accessors, so we can further clean up the timekeeping core. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
c9be0a36 |
|
04-Jan-2010 |
Andi Kleen <andi@firstfloor.org> |
sysdev: Pass attribute in sysdev_class attributes show/store Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. Similar to sysdev_attributes and normal attributes. This is a tree-wide sweep, converting everything in one go. No functional changes in this patch other than passing the new argument everywhere. Tested on x86, the non x86 parts are uncompiled. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
a8d6356c |
|
26-Feb-2010 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] time: remove unused code Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
bd119ee2 |
|
06-Dec-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] etr/stp: put correct per cpu variable Fix this compile error in linux-next: arch/s390/kernel/time.c: In function 'get_sync_clock': arch/s390/kernel/time.c:337: error: 'clock_sync_sync' undeclared (first use in this function) Gets exposed because the new per cpu code references the variable passed to put_cpu_var. This was not a real bug. Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0696b711 |
|
16-Nov-2009 |
Lin Ming <ming.m.lin@intel.com> |
timekeeping: Fix clock_gettime vsyscall time warp Since commit 0a544198 "timekeeping: Move NTP adjusted clock multiplier to struct timekeeper" the clock multiplier of vsyscall is updated with the unmodified clock multiplier of the clock source and not with the NTP adjusted multiplier of the timekeeper. This causes user space observerable time warps: new CLOCK-warp maximum: 120 nsecs, 00000025c337c537 -> 00000025c337c4bf Add a new argument "mult" to update_vsyscall() and hand in the timekeeping internal NTP adjusted multiplier. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: "Zhang Yanmin" <yanmin_zhang@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> LKML-Reference: <1258436990.17765.83.camel@minggr.sh.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
05e7ff7d |
|
11-Sep-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] introduce get_clock_monotonic Introduce get_clock_monotonic() function which can be used to get a (fast) timestamp. Resolution is the same as for get_clock(). The only difference is that the timestamps are monotonic and don't jump backward or forward. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b592e89a |
|
18-Aug-2009 |
Christof Schmitt <christof.schmitt@de.ibm.com> |
[SCSI] zfcp: Remove duplicated code for debug timestamps The timestamp calculation used for s390dbf output is the same in a private zfcp function and in debug.c. Replace both with a common inline function. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
#
23970e38 |
|
14-Aug-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
timekeeping: Introduce read_boot_clock Add the new function read_boot_clock to get the exact time the system has been started. For architectures without support for exact boot time a new weak function is added that returns 0. Use the exact boot time to initialize wall_to_monotonic, or xtime if the read_boot_clock returned 0. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134811.296703241@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
d4f587c6 |
|
14-Aug-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
timekeeping: Increase granularity of read_persistent_clock() The persistent clock of some architectures (e.g. s390) have a better granularity than seconds. To reduce the delta between the host clock and the guest clock in a virtualized system change the read_persistent_clock function to return a struct timespec. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134811.013873340@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
155ec602 |
|
14-Aug-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
timekeeping: Introduce struct timekeeper Add struct timekeeper to keep the internal values timekeeping.c needs in regard to the currently selected clock source. This moves the timekeeping intervals, xtime_nsec and the ntp error value from struct clocksource to struct timekeeper. The raw_time is removed from the clocksource as well. It gets treated like xtime as a global variable. Eventually xtime raw_time should be moved to struct timekeeper. [ tglx: minor cleanup ] Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134809.613209842@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
f1b82746 |
|
14-Aug-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
clocksource: Cleanup clocksource selection If a non high-resolution clocksource is first set as override clock and then registered it becomes active even if the system is in one-shot mode. Move the override check from sysfs_override_clocksource to the clocksource selection. That fixes the bug and simplifies the code. The check in clocksource_register for double registration of the same clocksource is removed without replacement. To find the initial clocksource a new weak function in jiffies.c is defined that returns the jiffies clocksource. The architecture code can then override the weak function with a more suitable clocksource, e.g. the TOD clock on s390. [ tglx: Folded in a fix from John Stultz ] Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134808.388024160@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
#
d7d1104f |
|
21-Jun-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] time: convert from bootmem to slab The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
88dbd203 |
|
12-Jun-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] ftrace: add function graph tracer support Function graph tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
f3d0a0d9 |
|
12-Jun-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] profile_tick called twice profile_tick is called twice for every clock comparator interrupt. The generic clock event code does it in tick_sched_timer and the s390 backend code in clock_comparator_work. That is one too many, remove the one in the arch backend code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
8e19608e |
|
21-Apr-2009 |
Magnus Damm <damm@igel.co.jp> |
clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ab96e798 |
|
14-Apr-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] boot cputime accounting Start the cpu time accounting very early to catch the cpu time spent for the initial kernel setup. To make the output of /proc/uptime match the sum of all cpu accounting values of the boot cpu reset xtime and wall_to_monotonic to sane values based on the TOD clock. The values set by timekeeping_init are off by up to a second. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b6112ccb |
|
14-Apr-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] add read_persistent_clock Add a read_persistent_clock function that does not just return 0. Since timekeeping_init calls the function before time_init has been called move reset_tod_clock to early.c to make sure that the TOD clock is running when read_persistent_clock is invoked. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
04362301 |
|
14-Apr-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] stp synchronization retry timer Add a timer that retries the clock synchronization via the server time protocol if there is a usable clock but the synchronization failed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
8283cb43 |
|
26-Mar-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] clock sync mode flags The clock sync mode flag CLOCK_SYNC_STP is not cleared when stp is set offline. In this case the get_sync_clock() function returns -EACCESS and the dasd driver will block all i/o until stp is enabled again. In addition get_sync_clock can return -EACCESS if the clock is not in sync instead of -EAGAIN. Rework the stp/etr online handling to fix these problems. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
179cb81a |
|
23-Jan-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] etr/stp: fix possible deadlock Precreate stop_machine threads in case the machine supports ETR/STP. Otherwise we might deadlock if a time sync operation gets scheduled and the creation of stop_machine threads would cause disk I/O. This is just the minimal fix. The real fix would be to only precreate stop_machine threads if ETR/STP is actually used. But that would be a rather large and complicated patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
feab6501 |
|
25-Dec-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] convert time printks to pr_xxx macros. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
c185b783 |
|
25-Dec-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Remove config options. On s390 we always want to run with precise cputime accounting. Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0b3016b7 |
|
25-Dec-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] serialize stp/etr work The work function dispatched with schedule_work() can be run twice on different cpus because run_workqueue clears the WORK_STRUCT_PENDING bit and then executes the function. Another cpu can call schedule_work() again and run the work function a second time before the first call is completed. This patch serialized the etr and stp work function with a mutex. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
750887de |
|
25-Dec-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] convert etr/stp to stop_machine interface This converts the etr and stp code to the new stop_machine interface which allows to synchronize all cpus without allocating any memory. This way we get rid of the only reason why we haven't converted s390 to the generic IPI interface yet. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b020632e |
|
25-Dec-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] introduce vdso on s390 Add a vdso to speed up gettimeofday and clock_getres/clock_gettime for CLOCK_REALTIME/CLOCK_MONOTONIC. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
320ab2b0 |
|
13-Dec-2008 |
Rusty Russell <rusty@rustcorp.com.au> |
cpumask: convert struct clock_event_device to cpumask pointers. Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
|
#
8107d829 |
|
27-Nov-2008 |
Christian Borntraeger <borntraeger@de.ibm.com> |
[S390] fix/cleanup sched_clock CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot: .. [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775679 [ 0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [6920575.975232] console [ttyS0] enabled [6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) .. The s390 implementation of sched_clock uses the store clock instruction and subtracts jiffies_timer_cc. jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used for sched_clock and monotonic clock. For historical reasons there is an offset on that value. With todays code this offset is unnecessary. By removing that offset we can get a sched_clock which returns the nanoseconds after time_init. This improves CONFIG_PRINTK_TIME. Since sched_clock is the only user, I have also renamed jiffies_timer_cc to sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant and can be romved as well. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
4a672cfa |
|
10-Oct-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] fix initialization of stp chsc_sstpc returns -EIO on error and 0 on success but stp_reset checks against 1 instead of 0. chsc_sstpc used to return 1 on success, one call location has not been updated .. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d3d238c7 |
|
03-Oct-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] nohz: Fix __udelay. This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691 ("[S390] nohz/sclp: disable timer on synchronous waits."). If udelay() gets called from a disabled context it sets the clock comparator to a value where it expects the next interrupt. When the interrupt happens the clock comparator gets not reset and therefore the interrupt condition doesn't get cleared. The result is an endless timer interrupt loop. In addition this patch fixes also the following: rcutorture reveals that our __udelay implementation is still buggy, since it might schedule tasklets, but prevents their execution: NOHZ: local_softirq_pending 42 NOHZ: local_softirq_pending 02 NOHZ: local_softirq_pending 142 NOHZ: local_softirq_pending 02 To fix this we make sure that only the clock comparator interrupt is enabled when the enabled wait psw is loaded. Also no code gets called anymore which might schedule tasklets. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
8f847003 |
|
01-Aug-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] stp: fix section mismatch warning. Fix these two (false positive) warnings by adding an __init annoation: WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem() The function stp_reset() references the function __init __alloc_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of __alloc_bootmem is wrong. WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem() The function stp_reset() references the function __init free_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of free_bootmem is wrong. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
4a0b2b4d |
|
01-Jul-2008 |
Andi Kleen <andi@firstfloor.org> |
sysdev: Pass the attribute to the low level sysdev show/store function This allow to dynamically generate attributes and share show/store functions between attributes. Right now most attributes are generated by special macros and lots of duplicated code. With the attribute passed it's instead possible to attach some data to the attribute and then use that in shared low level functions to do different things. I need this for the dynamically generated bank attributes in the x86 machine check code, but it'll allow some further cleanups. I converted all users in tree to the new show/store prototype. It's a single huge patch to avoid unbisectable sections. Runtime tested: x86-32, x86-64 Compiled only: ia64, powerpc Not compile tested/only grep converted: sh, arm, avr32 Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
f6f88e9b |
|
15-Jul-2008 |
Ingo Molnar <mingo@elte.hu> |
generic-ipi: more merge fallout fix more API change fallout in recently merged upstream changes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
d2fec595 |
|
14-Jul-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] stp support. Add support for clock synchronization with the server time protocol. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
15c8b6c1 |
|
09-May-2008 |
Jens Axboe <jens.axboe@oracle.com> |
on_each_cpu(): kill unused 'retry' parameter It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
8691e5a8 |
|
06-Jun-2008 |
Jens Axboe <jens.axboe@oracle.com> |
smp_call_function: get rid of the unused nonatomic/retry argument It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
#
a806170e |
|
16-Apr-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Fix a lot of sparse warnings. Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
5a62b192 |
|
16-Apr-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Convert s390 to GENERIC_CLOCKEVENTS. This way we get rid of s390's NO_IDLE_HZ and use the generic dynticks variant instead. In addition we get high resolution timers for free. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
c0015f91 |
|
16-Apr-2008 |
Jan Glauber <jan.glauber@de.ibm.com> |
[S390] switch sched_clock to store-clock-extended. Add get_clock_xt to read an 8 byte clock value using store clock extended (STCKE) and use get_clock_xt for sched_clock. STCKE should be faster than STCK on newer machines. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
5ccd0e43 |
|
04-Mar-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] idle: Fix machine check handling in idle loop. If a machine check handling is pending when the idle loop is entered default_idle will be left with timer ticks and virtual timer disabled. Fix this by "calling" the idle_chain. Also a BUG_ON(!in_interrupt) in start_hz_timer must be removed since the function now gets called from non interrupt context as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
06cb92ff |
|
19-Feb-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] etr: fix compile error on !SMP Since a5fbb6d1064be885d2a6b82f625186753cf74848 "KVM: fix !SMP build error" smp_call_function isn't a define anymore that folds into nothing but a define that calls up_smp_call_function with all parameters. Hence we cannot #ifdef out the unused code anymore... This seems to be the preferred method, so do this for s390 as well. arch/s390/kernel/time.c: In function 'etr_sync_clock': arch/s390/kernel/time.c:825: error: 'clock_sync_cpu_start' undeclared arch/s390/kernel/time.c:862: error: 'clock_sync_cpu_end' undeclared Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
af5ca3f4 |
|
19-Dec-2007 |
Kay Sievers <kay.sievers@vrfy.org> |
Driver core: change sysdev classes to use dynamic kobject names All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
#
fa13a5a1 |
|
09-Nov-2007 |
Paul Mackerras <paulus@samba.org> |
sched: restore deterministic CPU accounting on powerpc Since powerpc started using CONFIG_GENERIC_CLOCKEVENTS, the deterministic CPU accounting (CONFIG_VIRT_CPU_ACCOUNTING) has been broken on powerpc, because we end up counting user time twice: once in timer_interrupt() and once in update_process_times(). This fixes the problem by pulling the code in update_process_times that updates utime and stime into a separate function called account_process_tick. If CONFIG_VIRT_CPU_ACCOUNTING is not defined, there is a version of account_process_tick in kernel/timer.c that simply accounts a whole tick to either utime or stime as before. If CONFIG_VIRT_CPU_ACCOUNTING is defined, then arch code gets to implement account_process_tick. This also lets us simplify the s390 code a bit; it means that the s390 timer interrupt can now call update_process_times even when CONFIG_VIRT_CPU_ACCOUNTING is turned on, and can just implement a suitable account_process_tick(). account_process_tick() now takes the task_struct * as an argument. Tested both with and without CONFIG_VIRT_CPU_ACCOUNTING. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
d2cb0e6e |
|
05-Nov-2007 |
Christian Borntraeger <borntraeger@de.ibm.com> |
[S390] tod clock: announce clocksource as perfect The Time of Day clock is the standard time source for s390. It is - monotonic - allows very fast reading - architecture guarantees at least microsecond stepping - available as part of the architecture We should announce the rate of tod as 400 to be in sync with the description found in clocksource.h: "400-499:Perfect The ideal clocksource. A must-use where available." This change will prefer tod over less reliable clock sources. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
dce55470 |
|
10-Jul-2007 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] s390: rename CPU_IDLE to S390_CPU_IDLE sched-cfs-v2.6.22-git-v18.patch introduces CPU_IDLE in sched.h. This conflict with the already existing define in include/asm-s390/processor.h Just rename the s390 defines, since they will go away as soon as we support CONFIG_NO_HZ instead of our own CONFIG_NO_IDLE_HZ. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
3367b994 |
|
08-May-2007 |
Ralf Baechle <ralf@linux-mips.org> |
<linux/sysdev.h> needs to include <linux/module.h> sysdev.h uses THIS_MODULE so should include <linux/module.h>. [akpm@linux-foundation.org: couple of fixes] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ecdcc023 |
|
27-Apr-2007 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Switch etr from tasklet to workqueue. The clock synchronization of the ETR code requires an smp_call_function to synchronize all cpus. Calling smp_call_function from a tasklet is illegal. Replace the tasklet with a job on the global workqueue. ETR work is rare and can be postponed to a be done by a kernel thread. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
6c732de2 |
|
21-Feb-2007 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] etr: Add barrier() to etr_sync_cpu_start(). Force reading of *in_sync in while loop. Loops where the content that is checked for is changed by a different cpu always should have some sort of barrier() semantics. Otherwise this might lead to very subtle bugs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
cc02d809 |
|
16-Feb-2007 |
Thomas Gleixner <tglx@linutronix.de> |
[PATCH] clocksource: fixup is_continous changes on S390 Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
4d284cac |
|
05-Feb-2007 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Avoid excessive inlining. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d54853ef |
|
05-Feb-2007 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] ETR support. This patch adds support for clock synchronization to an external time reference (ETR). The external time reference sends an oscillator signal and a synchronization signal every 2^20 microseconds to keep the TOD clocks of all connected servers in sync. For availability two ETR units can be connected to a machine. If the clock deviates for more than the sync-check tolerance all cpus get a machine check that indicates that the clock is out of sync. For the lovely details how to get the clock back in sync see the code below. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2b67fc46 |
|
05-Feb-2007 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Get rid of a lot of sparse warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
dc64bef5 |
|
06-Oct-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Use CONFIG_GENERIC_TIME and define TOD clock source. Fix too slow clock by using CONFIG_GENERIC_TIME and adding a clock source for the s390 time-of-day clock. As added benefit we get rid of the s390 specific definition of do_gettimeofday and do_settimeofday. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5a489b98 |
|
06-Oct-2006 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] irq change build fixes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
8ef38609 |
|
01-Oct-2006 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[PATCH] kill wall_jiffies With 2.6.18-rc4-mm2, now wall_jiffies will always be the same as jiffies. So we can kill wall_jiffies completely. This is just a cleanup and logically should not change any real behavior except for one thing: RTC updating code in (old) ppc and xtensa use a condition "jiffies - wall_jiffies == 1". This condition is never met so I suppose it is just a bug. I just remove that condition only instead of kill the whole "if" block. [heiko.carstens@de.ibm.com: s390 build fix and cleanup] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
3171a030 |
|
29-Sep-2006 |
Atsushi Nemoto <anemo@mba.ocn.ne.jp> |
[PATCH] simplify update_times (avoid jiffies/jiffies_64 aliasing problem) Pass ticks to do_timer() and update_times(), and adjust x86_64 and s390 timer interrupt handler with this change. Currently update_times() calculates ticks by "jiffies - wall_jiffies", but callers of do_timer() should know how many ticks to update. Passing ticks get rid of this redundant calculation. Also there are another redundancy pointed out by Martin Schwidefsky. This cleanup make a barrier added by 5aee405c662ca644980c184774277fc6d0769a84 needless. So this patch removes it. As a bonus, this cleanup make wall_jiffies can be removed easily, since now wall_jiffies is always synced with jiffies. (This patch does not really remove wall_jiffies. It would be another cleanup patch) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
94c12cc7 |
|
28-Sep-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Inline assembly cleanup. Major cleanup of all s390 inline assemblies. They now have a common coding style. Quite a few have been shortened, mainly by using register asm variables. Use of the EX_TABLE macro helps as well. The atomic ops, bit ops and locking inlines new use the Q-constraint if a newer gcc is used. That results in slightly better code. Thanks to Christian Borntraeger for proof reading the changes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d2c993d8 |
|
12-Jul-2006 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Fix sparse warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
6ab3d562 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h> Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
705af309 |
|
23-May-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: fix typo in stop_hz_timer. Add missing parentheses for type cast to u64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
92f63cd0 |
|
20-May-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: next_timer_interrupt overflow in stop_hz_timer The 32 bit unsigned substraction (next - jiffies) in stop_hz_timer can overflow if jiffies gets advanced between next_timer_interrupt and the read under the xtime lock. The cast to a u64 then results in a large value which causes the cpu to wait too long. Fix this by casting next and jiffies independently to u64 before subtracting them. (Spotted by Zachary Amsden <zach@vmware.com>) Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
5afdbd6e |
|
15-May-2006 |
Heiko Carstens <hca@linux.ibm.com> |
[PATCH] s390: exploit rcu_needs_cpu() interface Exploit rcu_needs_cpu() interface to keep the cpu 'ticking' if necessary. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
32f65f27 |
|
01-Feb-2006 |
Jan Glauber <jan.glauber@de.ibm.com> |
[PATCH] s390: monotonic_clock interface Add monotonic_clock interface, used by the hangcheck-timer. On s390 this is the same as sched_clock(). Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
9dbafa53 |
|
01-Feb-2006 |
Jan Glauber <jan.glauber@de.ibm.com> |
[PATCH] s390: overflow in sched_clock The least significant bit of the TOD clock value returned by get_clock is the 4096th part of a microsecond. To get to nanoseconds the value needs to be divided by 4096 and multiplied with 1000. The current method multiplies first and then shifts the value to make the result as precise as possible. The disadvantage is that the multiplication with 1000 will overflow shortly after 52 days. sched_clock is used by the scheduler for time stamp deltas, if an overflow occurs between two time stamps the scheduler will get confused. With the patch the problem occurs only after approx. one year, so the chance to run into this overflow is extremly low. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1f1c12af |
|
14-Jan-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: cputime misaccounting finish_arch_switch needs to update the user cpu time as well, not just the system cpu time. Otherwise the partial user cpu time of a process that is stored in the lowcore will be (mis-)accounted to the next process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
c7584fb6 |
|
12-Jan-2006 |
Al Viro <viro@ftp.linux.org.uk> |
[PATCH] s390: task_pt_regs() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1b44e98d |
|
07-Nov-2005 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: stop_hz_timer vs. xtime updates The calculation of the value return by next_timer_interrupt from jiffies to jiffies_64 is racy against xtime updates. We need to protect the calculation with read_seqbegin/read_seqretry. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
ecea8d19 |
|
30-Oct-2005 |
Thomas Gleixner <tglx@linutronix.de> |
[PATCH] jiffies_64 cleanup Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
b149ee22 |
|
06-Sep-2005 |
John Stultz <johnstul@us.ibm.com> |
[PATCH] NTP: ntp-helper functions This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
4b7e0706 |
|
01-May-2005 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: idle timer setup Fix overflow in calculation of the new tod value in stop_hz_timer and fix wrong virtual timer list idle time in case the virtual timer is already expired in stop_cpu_timer. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|