#
bdbd3acb |
|
03-Feb-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/fpu: remove anonymous union from struct fpu The anonymous union within struct fpu contains a floating point register array and a vector register array. Given that the vector register is always present remove the floating point register array. For configurations without vector registers save the floating point register contents within their corresponding vector register location. This allows to remove the union, and also to simplify ptrace and perf code. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
87c5c700 |
|
03-Feb-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/fpu: rename save_fpu_regs() to save_user_fpu_regs(), etc Rename save_fpu_regs(), load_fpu_regs(), and struct thread_struct's fpu member to save_user_fpu_regs(), load_user_fpu_regs(), and ufpu. This way the function and variable names reflect for which context they are supposed to be used. This large and trivial conversion is a prerequisite for making the kernel fpu usage preemptible. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
fd2527f2 |
|
03-Feb-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/fpu: move, rename, and merge header files Move, rename, and merge the fpu and vx header files. This way fpu header files have a consistent naming scheme (fpu*.h). Also get rid of the fpu subdirectory and move header files to asm directory, so that all fpu and vx header files can be found at the same location. Merge internal.h header file into other header files, since the internal helpers are used at many locations. so those helper functions are really not internal. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
340750c1 |
|
05-Feb-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/switch_to: use generic header file Move the switch_to() implementation to process.c and use the generic switch_to.h header file instead, like some other architectures. This addresses also the oddity that the old switch_to() implementation assigns the return value of __switch_to() to 'prev' instead of 'last', like it should. Remove also all includes of switch_to.h from C files, except process.c. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
30410373 |
|
05-Feb-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/acrs: cleanup access register handling save_access_regs() and restore_access_regs() are only available by including switch_to.h. This is done by a couple of C files, which have nothing to do with switch_to(), but only need these functions. Move both functions to a new header file and improve the implementation: - Get rid of typedef - Add memory access instrumentation support - Use long displacement instructions lamy/stamy instead of lam/stam - all current users end up with better code because of this Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
ba69655f |
|
09-Jan-2024 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: remove leftover comment The code which validates floating point control register contents was reworked with commit 702644249d3e ("s390/fpu: get rid of test_fp_ctl()"). There is still a comment which refers to the old implementation - remove it in order to avoid confusion. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
#
18564756 |
|
01-Dec-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/fpu: get rid of MACHINE_HAS_VX Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx() which is a short readable wrapper for "test_facility(129)". Facility bit 129 is set if the vector facility is present. test_facility() returns also true for all bits which are set in the architecture level set of the cpu that the kernel is compiled for. This means that test_facility(129) is a compile time constant which returns true for z13 and later, since the vector facility bit is part of the z13 kernel ALS. In result the compiled code will have less runtime checks, and less code. Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
#
70264424 |
|
30-Nov-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/fpu: get rid of test_fp_ctl() It is quite subtle to use test_fp_ctl() correctly. Therefore remove it - instead copy whatever new floating point control (fpc) register values are supposed to be used into its save area. Test the validity of the new value when loading it. If the new value is invalid, load the fpc register with zero. This seems to be a the best way to approach this problem. Even though this changes behavior: - sigreturn with an invalid fpc value on the stack will succeed, and continue with zero value, instead of returning with SIGSEGV - ptraced processes will also use a zero value instead of letting the request fail with -EINVAL However all of this seems to acceptable. After all testing of the value was only implemented to avoid that user space can crash the kernel. It is not there to test values for validity; and the assumption is that there is no existing user space which is doing this. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
#
8b13601d |
|
30-Nov-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl(). Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
#
99441a38 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390: use control register bit defines Use control register bit defines instead of plain numbers where possible. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
527618ab |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ctlreg: add struct ctlreg Add struct ctlreg to enforce strict type checking / usage for control register functions. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
4b440e01 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/kprobes,ptrace: open code struct per_reg Open code struct per_regs within kprobes and ptrace code, since at both locations a struct per_regs is passed to __local_ctl_load() and __local_ctl_store() which prevents to implement type checking for both functions. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
80725978 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ctlreg: change parameters of __local_ctl_load() and __local_ctl_store() Change __local_ctl_load() and __local_ctl_store(), so that control register parameters come first. This way all control handling functions consistently have control register(s) parameter first. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
2372d391 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ctlreg: use local_ctl_load() and local_ctl_store() where possible Convert all single control register usages of __local_ctl_load() and __local_ctl_store() to local_ctl_load() and local_ctl_store(). This also requires to change the type of some struct lowcore members from __u64 to unsigned long. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
8d5e98f8 |
|
11-Sep-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ctlreg: add local and system prefix to some functions Add local and system prefix to some functions to clarify they change control register contents on either the local CPU or the on all CPUs. This results in the following API: Two defines which load and save multiple control registers. The defines correlate with the following C prototypes: void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high); void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high); Two functions which locally set or clear one bit for a specified control register: void local_ctl_set_bit(unsigned int cr, unsigned int bit); void local_ctl_clear_bit(unsigned int cr, unsigned int bit); Two functions which set or clear one bit for a specified control register on all CPUs: void system_ctl_set_bit(unsigned int cr, unsigned int bit); void system_ctl_clear_bit(unsigend int cr, unsigned int bit); Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
f9bbf25e |
|
05-Mar-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK request fails, instead of silently ignoring it. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
a02d584e |
|
02-Feb-2023 |
Heiko Carstens <hca@linux.ibm.com> |
s390/vx: use simple assignments to access __vector128 members Use simple assignments to access __vector128 members instead of hard to read casts. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
355f841a |
|
08-Feb-2022 |
Eric W. Biederman <ebiederm@xmission.com> |
tracehook: Remove tracehook.h Now that all of the definitions have moved out of tracehook.h into ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in tracehook.h so remove it. Update the few files that were depending upon tracehook.h to bring in definitions to use the headers they need directly. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
#
96f6641a |
|
17-Feb-2022 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: remove opencoded offsetof Remove opencoded offsetof and use offsetof instead. The generated code is identical before/after this change. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
755112b3 |
|
05-May-2021 |
Sven Schnelle <svens@linux.ibm.com> |
s390/traps: add struct to access transactional diagnostic block gcc-11 warns: arch/s390/kernel/traps.c: In function __do_pgm_check: arch/s390/kernel/traps.c:319:17: warning: memcpy reading 256 bytes from a region of size 0 [-Wstringop-overread] 319 | memcpy(¤t->thread.trap_tdb, &S390_lowcore.pgm_tdb, 256); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by adding a struct pgm_tdb to struct lowcore and copy that. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
56e62a73 |
|
21-Nov-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
fd78c594 |
|
12-Aug-2020 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: fix storage key handling The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
#
ca15ca40 |
|
07-Aug-2020 |
Mike Rapoport <rppt@kernel.org> |
mm: remove unneeded includes of <asm/pgalloc.h> Patch series "mm: cleanup usage of <asm/pgalloc.h>" Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in <asm-generic/pgalloc.h> and enable use of the generic functions where appropriate. In addition, functions declared and defined in <asm/pgalloc.h> headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the <asm/pgalloc.h> included all over the place. The first patch in this series removes unneeded includes of <asm/pgalloc.h> In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases <asm/pgalloc.h> header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in <asm/pgalloc.h> and do not require that header. As for the other header files that used to include <asm/pgalloc.h>, it is possible to move that include into the .c file that actually uses symbols from <asm/pgalloc.h> and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b69c6320 |
|
11-May-2020 |
Al Viro <viro@zeniv.linux.org.uk> |
s390: switch to ->regset_get() NB: compat NT_S390_LAST_BREAK might be better as compat_long_t rather than long. User-visible ABI, again... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
873e5a76 |
|
09-Mar-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/ptrace: fix setting syscall number When strace wants to update the syscall number, it sets GPR2 to the desired number and updates the GPR via PTRACE_SETREGSET. It doesn't update regs->int_code which would cause the old syscall executed on syscall restart. As we cannot change the ptrace ABI and don't have a field for the interruption code, check whether the tracee is in a syscall and the last instruction was svc. In that case assume that the tracer wants to update the syscall number and copy the GPR2 value to regs->int_code. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
00332c16 |
|
06-Mar-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/ptrace: pass invalid syscall numbers to tracing tracing expects to see invalid syscalls, so pass it through. The syscall path in entry.S checks the syscall number before looking up the handler, so it is still safe. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
cd29fa79 |
|
06-Mar-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/ptrace: return -ENOSYS when invalid syscall is supplied The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
664f5f8d |
|
04-Mar-2020 |
Sven Schnelle <svens@linux.ibm.com> |
s390/seccomp: pass syscall arguments via seccomp_data Use __secure_computing() and pass the register data via seccomp_data so secure computing doesn't have to fetch it again. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
e31cf2f4 |
|
08-Jun-2020 |
Mike Rapoport <rppt@kernel.org> |
mm: don't include asm/pgtable.h if linux/mm.h is already included Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
0ba57780 |
|
12-Apr-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
s390: ptrace: hard-code "s390x" instead of UTS_MACHINE s390 uses the UTS_MACHINE defined arch/s390/Makefile as follows: UTS_MACHINE := s390x We do not need to pass the fixed string from the command line. Hard-code user_regset_view::name, like many other architectures do. Link: https://lkml.kernel.org/r/20200413013113.8529-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
#
fefad9ef |
|
24-Sep-2019 |
Christian Brauner <christian.brauner@ubuntu.com> |
seccomp: simplify secure_computing() Afaict, the struct seccomp_data argument to secure_computing() is unused by all current callers. So let's remove it. The argument was added in [1]. It was added because having the arch supply the syscall arguments used to be faster than having it done by secure_computing() (cf. Andy's comment in [2]). This is not true anymore though. /* References */ [1]: 2f275de5d1ed ("seccomp: Add a seccomp_data parameter secure_computing()") [2]: https://lore.kernel.org/r/CALCETrU_fs_At-hTpr231kpaAd0z7xJN4ku-DvzhRU6cvcJA_w@mail.gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: x86@kernel.org Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20190924064420.6353-1-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
c67fdc1f |
|
23-Apr-2019 |
Christoph Hellwig <hch@lst.de> |
arch: mostly remove <asm/segment.h> A few architectures use <asm/segment.h> internally, but nothing in common code does. Remove all the empty or almost empty versions of it, including the asm-generic one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
9d0ca444 |
|
28-Nov-2017 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/gs: add compat regset for the guarded storage broadcast control block git commit e525f8a6e696210d15f8b8277d4da12fc4add299 "s390/gs: add regset for the guarded storage broadcast control block" added the missing regset to the s390_regsets array but failed to add it to the s390_compat_regsets array. Fixes: e525f8a6e696 ("add compat regset for the guarded storage broadcast control block") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b2441318 |
|
01-Nov-2017 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
ad3bc0ac |
|
12-Oct-2017 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ctl_reg: use decoding unions in update_cr_regs Add a decoding union for the bits in control registers 2 and use 'union ctlreg0' and 'union ctlreg2' in update_cr_regs to improve readability. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
262832bc |
|
13-Sep-2017 |
Alice Frosi <alice@linux.vnet.ibm.com> |
s390/ptrace: add runtime instrumention register get/set Add runtime instrumention register get and set which allows to read and modify the runtime instrumention control block. Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5ef2d523 |
|
11-Sep-2017 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: fix guarded storage regset handling If the guarded storage regset for current is supposed to be changed, the regset from user space is copied directly into the guarded storage control block. If then the process gets scheduled away while the control block is being copied and before the new control block has been loaded, the result is random: the process can be scheduled away due to a page fault or preemption. If that happens the already copied parts will be overwritten by save_gs_cb(), called from switch_to(). Avoid this by copying the data to a temporary buffer on the stack and do the actual update with preemption disabled. Fixes: f5bbd7219891 ("s390/ptrace: guarded storage regset for the current task") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
f5bbd721 |
|
19-May-2017 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: guarded storage regset for the current task The regset functions for guarded storage are supposed to work on the current task as well. For task == current add the required load and store instructions for the guarded storage control block. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
e525f8a6 |
|
20-Apr-2017 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/gs: add regset for the guarded storage broadcast control block The guarded storage interface allows to register a control block for each thread that is activated with the guarded storage broadcast event. To retrieve the complete state of a process from the kernel a register set for the stored broadcast control block is required. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
916cda1a |
|
26-Jan-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
68db0cf1 |
|
08-Feb-2017 |
Ingo Molnar <mingo@kernel.org> |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
9dce990d |
|
24-Jan-2017 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. convert_vx_to_fp() is adapted to handle only a specified number of registers rather than unconditionally handling all of them: other callers of this function are adapted appropriately. Based on an initial patch by Dave Martin. Cc: stable@vger.kernel.org Reported-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
7c0f6ba6 |
|
24-Dec-2016 |
Linus Torvalds <torvalds@linux-foundation.org> |
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ef280c85 |
|
07-Nov-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: move sys_call_table and last_break from thread_info to thread_struct Move the last two architecture specific fields from the thread_info structure to the thread_struct. All that is left in thread_info is the flags field. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
f8fc82b4 |
|
08-Nov-2016 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: move system_call field from thread_info to thread_struct The system_call field in thread_info structure is used by the signal code to store the number of the current system call while the debugger interacts with its inferior. A better location for the system_call field is with the other debugger related information in the thread_struct. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
da7f750c |
|
22-Jun-2016 |
Paul Moore <paul@paul-moore.com> |
s390: ensure that syscall arguments are properly masked on s390 When executing s390 code on s390x the syscall arguments are not properly masked, leading to some malformed audit records. Signed-off-by: Paul Moore <paul@paul-moore.com>
|
#
0208b944 |
|
02-Jun-2016 |
Kees Cook <keescook@chromium.org> |
s390/ptrace: run seccomp after ptrace Close the hole where ptrace can change a syscall out from under seccomp. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linux-s390@vger.kernel.org
|
#
2f275de5 |
|
27-May-2016 |
Andy Lutomirski <luto@kernel.org> |
seccomp: Add a seccomp_data parameter secure_computing() Currently, if arch code wants to supply seccomp_data directly to seccomp (which is generally much faster than having seccomp do it using the syscall_get_xyz() API), it has to use the two-phase seccomp hooks. Add it to the easy hooks, too. Cc: linux-arch@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
9cb1ccec |
|
18-Jan-2016 |
Heiko Carstens <hca@linux.ibm.com> |
s390: remove all usages of PSW_ADDR_INSN Yet another leftover from the 31 bit era. The usual operation "y = x & PSW_ADDR_INSN" with the PSW_ADDR_INSN mask is a nop for CONFIG_64BIT. Therefore remove all usages and hope the code is a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
|
#
55a423b6 |
|
27-Oct-2015 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/kernel: fix ptrace peek/poke for floating point registers git commit 155e839a814834a3b4b31e729f4716e59d3d2dd4 "s390/kernel: dynamically allocate FP register save area" introduced a regression in regard to ptrace. If the vector register extension is not present or unused the ptrace peek of a floating pointer register return incorrect data and the ptrace poke to a floating pointer register overwrites the task structure starting at task->thread.fpu.fprs. Cc: stable@kernel.org # v4.3 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b5510d9b |
|
29-Sep-2015 |
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
s390/fpu: always enable the vector facility if it is available If the kernel detects that the s390 hardware supports the vector facility, it is enabled by default at an early stage. To force it off, use the novx kernel parameter. Note that there is a small time window, where the vector facility is enabled before it is forced to be off. With enabling the vector facility by default, the FPU save and restore functions can be improved. They do not longer require to manage expensive control register updates to enable or disable the vector enablement control for particular processes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d0164ee2 |
|
29-Jun-2015 |
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
9977e886 |
|
09-Jun-2015 |
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
904818e2 |
|
11-Jun-2015 |
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5a79859a |
|
12-Feb-2015 |
Heiko Carstens <hca@linux.ibm.com> |
s390: remove 31 bit support Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
7490daf0 |
|
02-Dec-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: always include vector registers in core files On machines with support for vector registers the signal frame includes an area for the vector registers and the ptrace regset interface allow read and write. This is true even if the task never used any vector instruction. Only elf core dumps do not include the vector registers, to make things consistent always include the vector register note in core dumps create on a machine with vector register support. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
86c558e8 |
|
14-Nov-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: fix ptrace of user area if the inferior uses vector registers The floating point registers of a process that uses vector instruction are not store into task->thread.fp_regs anymore but in the upper halves of the first 16 vector registers. The ptrace interface for the peeks and pokes to the user area fails to take this into account. Fix __peek_user[_compat] and __poke_user[_compat] to use the vector array for the floating pointer register if the process has one. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
80703617 |
|
06-Oct-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2a0a5b22 |
|
22-Sep-2014 |
Jan Willeke <willeke@de.ibm.com> |
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
91397401 |
|
11-Mar-2014 |
Eric Paris <eparis@redhat.com> |
ARCH: AUDIT: audit_syscall_entry() should not require the arch We have a function where the arch can be queried, syscall_get_arch(). So rather than have every single piece of arch specific code use and/or duplicate syscall_get_arch(), just have the audit code use the syscall_get_arch() code. Based-on-patch-by: Richard Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: microblaze-uclinux@itee.uq.edu.au Cc: linux-mips@linux-mips.org Cc: linux@lists.openrisc.net Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: x86@kernel.org
|
#
a4412fc9 |
|
21-Jul-2014 |
Andy Lutomirski <luto@amacapital.net> |
seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing The secure_computing function took a syscall number parameter, but it only paid any attention to that parameter if seccomp mode 1 was enabled. Rather than coming up with a kludge to get the parameter to work in mode 2, just remove the parameter. To avoid churn in arches that don't have seccomp filters (and may not even support syscall_get_nr right now), this leaves the parameter in secure_computing_strict, which is now a real function. For ARM, this is a bit ugly due to the fact that ARM conditionally supports seccomp filters. Fixing that would probably only be a couple of lines of code, but it should be coordinated with the audit maintainers. This will be a slight slowdown on some arches. The right fix is to pass in all of seccomp_data instead of trying to make just the syscall nr part be fast. This is a prerequisite for making two-phase seccomp work cleanly. Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: x86@kernel.org Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Kees Cook <keescook@chromium.org>
|
#
dab6cf55 |
|
23-Jun-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: fix PSW mask check The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. The PSW_MASK_USER define contains the PSW_MASK_ASC bits, the ptrace interface accepts all combinations for the address-space-control bits. To protect the kernel space the PSW mask check in ptrace needs to reject the address-space-control bit combination for home space. Fixes CVE-2014-3534 Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d3a73acb |
|
14-Apr-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a8a934e4 |
|
01-Apr-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: fix control register update The git commit c63badebfebacdba827ab1cc1d420fc81bd8d818 "s390: optimize control register update" broke the update for control register 0. After the update do the lctlg from the correct value. Cc: <stable@vger.kernel.org> # 3.14 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
818a330c |
|
13-Mar-2014 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: add support for PTRACE_SINGLEBLOCK The PTRACE_SINGLEBLOCK option is used to get control whenever the inferior has executed a successful branch. The PER option to implement block stepping is successful-branching event, bit 32 in the PER-event mask. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
c63badeb |
|
03-Dec-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: optimize control register update It is less expensive to update control registers 0 and 2 with two individual stctg/lctlg instructions as with a single one that spans control register 0, 1 and 2. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
1c182a62 |
|
03-Dec-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/ptrace: simplify enable/disable single step The user_enable_single_step() and user_disable_sindle_step() functions are always called on the inferior, never for the currently active process. Remove the unnecessary check for the current process and the update_cr_regs() call from the enable/disable functions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
f26946d7 |
|
16-Oct-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390/compat: make psw32_user_bits a constant value again Make psw32_user_bits a constant value again. This is a leftover of the code which allowed to run the kernel either in primary or home space which got removed with 9a905662 "s390/uaccess: always run the kernel in home space". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5ebf250d |
|
16-Oct-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
4725c860 |
|
15-Oct-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
e258d719 |
|
24-Sep-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
0628a5fb |
|
27-Aug-2013 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390/tx: allow program interruption filtering in user space A user space program using the transactional execution facility should be allowed to do program interrupt filtering. Do not set the transactional-execution program-interruption-filtering override (PIFO) bit in CR0. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
958d9072 |
|
21-Jul-2013 |
Heiko Carstens <hca@linux.ibm.com> |
s390: replace remaining strict_strtoul() with kstrtoul() Replace the last two strict_strtoul() with kstrtoul(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
64597f9d |
|
02-Jul-2013 |
Michael Mueller <mimu@linux.vnet.ibm.com> |
s390/ptrace: PTRACE_TE_ABORT_RAND The patch implements a s390 specific ptrace request PTRACE_TE_ABORT_RAND to modify the randomness of spontaneous aborts of memory transactions of the transaction execution facility. The data argument of the ptrace request is used to specify the levels of randomness, 0 for normal operation, 1 to abort every transaction at a random instruction, and 2 to abort a random transaction at a random instruction. The default is 0 for normal operation. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
66389e85 |
|
13-Sep-2012 |
Heiko Carstens <hca@linux.ibm.com> |
s390/ptrace: add missing ifdef if (MACHINE_HAS_TE) translates to if (0) on !CONFIG_64BIT however the compiler still warns about invalid shifts within non-reachable code. So add an explicit ifdef to get rid of this warning: arch/s390/kernel/ptrace.c: In function ‘update_per_regs’: arch/s390/kernel/ptrace.c:63:4: warning: left shift count >= width of type [enabled by default] arch/s390/kernel/ptrace.c:65:4: warning: left shift count >= width of type [enabled by default] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
d35339a4 |
|
31-Jul-2012 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
c63cb468 |
|
31-Jul-2012 |
Heiko Carstens <hca@linux.ibm.com> |
s390/seccomp: add support for system call filtering using BPF Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a53c8fab |
|
20-Jul-2012 |
Heiko Carstens <hca@linux.ibm.com> |
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
e4da89d0 |
|
17-Apr-2012 |
Will Drewry <wad@chromium.org> |
seccomp: ignore secure_computing return values This change is inspired by https://lkml.org/lkml/2012/4/16/14 which fixes the build warnings for arches that don't support CONFIG_HAVE_ARCH_SECCOMP_FILTER. In particular, there is no requirement for the return value of secure_computing() to be checked unless the architecture supports seccomp filter. Instead of silencing the warnings with (void) a new static inline is added to encode the expected behavior in a compiler and human friendly way. v2: - cleans things up with a static inline - removes sfr's signed-off-by since it is a different approach v1: - matches sfr's original change Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
|
#
a0616cde |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
|
#
048cd4e5 |
|
27-Feb-2012 |
Heiko Carstens <hca@linux.ibm.com> |
compat: fix compile breakage on s390 The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
b05d8447 |
|
03-Jan-2012 |
Eric Paris <eparis@redhat.com> |
audit: inline audit_syscall_entry to reduce burden on archs Every arch calls: if (unlikely(current->audit_context)) audit_syscall_entry() which requires knowledge about audit (the existance of audit_context) in the arch code. Just do it all in static inline in audit.h so that arch's can remain blissfully ignorant. Signed-off-by: Eric Paris <eparis@redhat.com>
|
#
d7e7528b |
|
03-Jan-2012 |
Eric Paris <eparis@redhat.com> |
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
|
#
cfc9066b |
|
01-Dec-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] remove reset of system call restart on psw changes git commit 20b40a794baf3b4b "signal race with restarting system calls" added code to the poke_user/poke_user_compat to reset the system call restart information in the thread-info if the PSW address is changed. The purpose of that change has been to workaround old gdbs that do not know about the REGSET_SYSTEM_CALL. It turned out that this is not a good idea, it makes the behaviour of the debuggee dependent on the order of specific ptrace call, e.g. the REGSET_SYSTEM_CALL register set needs to be written last. And the workaround does not really fix old gdbs, inferior calls on interrupted restarting system calls do not work either way. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b934069c |
|
01-Dec-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] add missing .set function for NT_S390_LAST_BREAK regset The last breaking event address is a read-only value, the regset misses the .set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we get an oops due to a branch to zero: Kernel BUG at 0000000000000002 verbose debug info unavailable illegal operation: 0001 #1 SMP ... Call Trace: (<0000000000158294> ptrace_regset+0x184/0x188) <00000000001595b6> ptrace_request+0x37a/0x4fc <0000000000109a78> arch_ptrace+0x108/0x1fc <00000000001590d6> SyS_ptrace+0xaa/0x12c <00000000005c7a42> sysc_noemu+0x16/0x1c <000003fffd5ec10c> 0x3fffd5ec10c Last Breaking-Event-Address: <0000000000158242> ptrace_regset+0x132/0x188 Add a nop .set function to prevent the branch to zero. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: stable@kernel.org
|
#
d4e81b35 |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] allow all addressing modes The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b50511e4 |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] cleanup psw related bits and pieces Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros. Change psw_kernel_bits / psw_user_bits to contain only the bits that are always set in the respective mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
b6ef5bb3 |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
20b40a79 |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] signal race with restarting system calls For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a45aff52 |
|
30-Oct-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] user per registers vs. ptrace single stepping git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression for the case when both a user PER set (e.g. a storage alteration trace) and PTRACE_SINGLESTEP are active. The new code will overrule the user PER set with a instruction-fetch PER set over the whole address space for ptrace single stepping. The inferior process will be stopped after each instruction with an instruction fetch event. Any other events that may have occurred concurrently are not reported (e.g. storage alteration event) because the control bits for them are not set. The solution is to merge the PER control bits of the user PER set with the PER_EVENT_IFETCH control bit for PTRACE_SINGLESTEP. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5e9a2692 |
|
04-Jan-2011 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] ptrace cleanup Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
9b05a69e |
|
27-Oct-2010 |
Namhyung Kim <namhyung@gmail.com> |
ptrace: change signature of arch_ptrace() Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
86f2552b |
|
17-May-2010 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
545c174d |
|
12-May-2010 |
Gerald Schaefer <gerald.schaefer@linux.ibm.com> |
[S390] ptrace: fix return value of do_syscall_trace_enter() strace may change the system call number, so regs->gprs[2] must not be read before tracehook_report_syscall_entry(). This fixes a bug where "strace -f" will hang after a vfork(). Cc: <stable@kernel.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
952974ac6 |
|
12-Feb-2010 |
Heiko Carstens <hca@linux.ibm.com> |
s390: Add pt_regs register and stack access API This API is needed for the kprobe-based event tracer. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LKML-Reference: <20100212123840.GB27548@osiris.boeblingen.de.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
#
c3311c13 |
|
13-Jan-2010 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] fix loading of PER control registers for utrace. If the current task enables / disables PER tracing for itself the PER control registers need to be loaded in FixPerRegisters. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
622e99bf |
|
18-Dec-2009 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS The elf notes number for the upper register halves is s390 specific. Change the name of the elf notes to include S390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
ea2a4d3a |
|
06-Oct-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
07805ac8 |
|
22-Sep-2009 |
Christian Borntraeger <borntraeger@de.ibm.com> |
[S390] ptrace: use common code for simple peek/poke operations arch_ptrace on s390 implements PTRACE_(PEEK|POKE)(TEXT|DATA) instead of using using ptrace_request in kernel/ptrace.c. The only reason is the 31bit addressing mode, where we have to unmask the highest bit. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
1c569f02 |
|
24-Aug-2009 |
Josh Stone <jistone@redhat.com> |
tracing: Create generic syscall TRACE_EVENTs This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so you can have generic ftrace events that capture all system calls with arguments and return values. These generic events are also renamed to sys_enter/exit, so they're more closely aligned to the specific sys_enter_foo events. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
#
97419875 |
|
24-Aug-2009 |
Josh Stone <jistone@redhat.com> |
tracing: Move tracepoint callbacks from declaration to definition It's not strictly correct for the tracepoint reg/unreg callbacks to occur when a client is hooking up, because the actual tracepoint may not be present yet. This happens to be fine for syscall, since that's in the core kernel, but it would cause problems for tracepoints defined in a module that hasn't been loaded yet. It also means the reg/unreg has to be EXPORTed for any modules to use the tracepoint (as in SystemTap). This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces DEFINE_TRACE_FN which stores the callbacks in struct tracepoint. The callbacks are used now when the active state of the tracepoint changes in set_tracepoint & disable_tracepoint. This also introduces TRACE_EVENT_FN, so ftrace events can also provide registration callbacks if needed. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
#
66700001 |
|
24-Aug-2009 |
Josh Stone <jistone@redhat.com> |
tracing: Rename FTRACE_SYSCALLS for tracepoints s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g The syscall enter/exit tracing is no longer specific to just ftrace, so they now have names that reflect their tie to tracepoints instead. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
#
5e9ad7df |
|
18-Aug-2009 |
Ingo Molnar <mingo@elte.hu> |
[S390] ftrace: update system call tracer support Commit fb34a08c3 ("tracing: Add trace events for each syscall entry/exit") changed the lowlevel API to ftrace syscall tracing but did not update s390 which started making use of it recently. This broke the s390 build, as reported by Paul Mundt. Update the callbacks with the syscall number and the syscall return code values. This allows per syscall tracepoints, syscall argument enumeration /debug/tracing/events/syscalls/ and perfcounters support and integration on s390 too. Reported-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <tip-fb34a08c3469b2be9eae626ccb96476b4687b810@git.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
#
405f5571 |
|
11-Jul-2009 |
Alexey Dobriyan <adobriyan@gmail.com> |
headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
9bf1226b |
|
12-Jun-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] ftrace: add system call tracer support System call tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
bcf5cef7 |
|
12-Jun-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] secure computing arch backend Enable secure computing on s390 as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
7757591a |
|
12-Jun-2009 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] implement is_compat_task Implement is_compat_task and use it all over the place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
547e3cec |
|
25-Dec-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] remove ptrace warning on 31 bit. A kernel compile on 31 bit gives the following warnings in ptrace.c: arch/s390/kernel/ptrace.c: In function 'peek_user': arch/s390/kernel/ptrace.c:207: warning: unused variable 'dummy' arch/s390/kernel/ptrace.c: In function 'poke_user': arch/s390/kernel/ptrace.c:315: warning: unused variable 'dummy' Getting rid of the dummy variables removes the warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
59da2139 |
|
27-Nov-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] fix system call parameter functions. syscall_get_nr() currently returns a valid result only if the call chain of the traced process includes do_syscall_trace_enter(). But collect_syscall() can be called for any sleeping task, the result of syscall_get_nr() in general is completely bogus. To make syscall_get_nr() work for any sleeping task the traps field in pt_regs is replace with svcnr - the system call number the process is executing. If svcnr == 0 the process is not on a system call path. The syscall_get_arguments and syscall_set_arguments use regs->gprs[2] for the first system call parameter. This is incorrect since gprs[2] may have been overwritten with the system call number if the call chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
753c4dd6 |
|
10-Oct-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
3d6e48f4 |
|
08-Sep-2008 |
Jarod Wilson <jwilson@redhat.com> |
[S390] CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode When running a 31-bit ptrace, on either an s390 or s390x kernel, reads and writes into a padding area in struct user_regs_struct32 will result in a kernel panic. This is also known as CVE-2008-1514. Test case available here: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/user-area-padding.c?cvsroot=systemtap Steps to reproduce: 1) wget the above 2) gcc -o user-area-padding-31bit user-area-padding.c -Wall -ggdb2 -D_GNU_SOURCE -m31 3) ./user-area-padding-31bit <panic> Test status ----------- Without patch, both s390 and s390x kernels panic. With patch, the test case, as well as the gdb testsuite, pass without incident, padding area reads returning zero, writes ignored. Nb: original version returned -EINVAL on write attempts, which broke the gdb test and made the test case slightly unhappy, Jan Kratochvil suggested the change to return 0 on write attempts. Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
63506c41 |
|
14-Jul-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Introduce user_regset accessors for s390 Add the user_regset definitions for normal and compat processes, replace the dump_regs core dump cruft with the generic CORE_DUMP_USER_REGSET and replace binfmt_elf32.c with the generic compat_binfmt_elf.c implementation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
b499d76b |
|
07-May-2008 |
Roland McGrath <roland@redhat.com> |
[S390] compat ptrace cleanup This removes redundant arch code for generic ptrace requests already handled by ptrace_request and compat_ptrace_request. It simplifies things to just have the standard entry points, and use the generic compat_sys_ptrace. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
941af343 |
|
30-Apr-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] use generic sys_ptrace After the PT_IEEE_IP hack has been removed s390 can now use the common code sys_ptrace function. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
613e1def |
|
30-Apr-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[S390] Remove self ptrace IEEE_IP hack. The self referential PT_IEEE_IP ptrace peek & poke calls have been broken for that last 6 years. For peek the code always returns 0 instead of the last ieee fault and for poke the code does nothing. Since nobody noticed the code seems to be superfluous. So lets remove it. Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
a806170e |
|
16-Apr-2008 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Fix a lot of sparse warnings. Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
#
0ac30be4 |
|
26-Jan-2008 |
Roland McGrath <roland@redhat.com> |
[S390] single-step cleanup Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
1bcf5482 |
|
16-Oct-2007 |
Alexey Dobriyan <adobriyan@sw.ru> |
Consolidate PTRACE_DETACH Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f284ce72 |
|
17-Jul-2007 |
Alexey Dobriyan <adobriyan@gmail.com> |
PTRACE_POKEDATA consolidation Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata() function. AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless return EPERM. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
76647323 |
|
17-Jul-2007 |
Alexey Dobriyan <adobriyan@gmail.com> |
PTRACE_PEEKDATA consolidation Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata() function. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c1821c2e |
|
05-Feb-2007 |
Gerald Schaefer <gerald.schaefer@linux.ibm.com> |
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
2b67fc46 |
|
05-Feb-2007 |
Heiko Carstens <hca@linux.ibm.com> |
[S390] Get rid of a lot of sparse warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
#
5411be59 |
|
29-Mar-2006 |
Al Viro <viro@zeniv.linux.org.uk> |
[PATCH] drop task argument of audit_syscall_{entry,exit} ... it's always current, and that's a good thing - allows simpler locking. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
c7584fb6 |
|
12-Jan-2006 |
Al Viro <viro@ftp.linux.org.uk> |
[PATCH] s390: task_pt_regs() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
6b9c7ed8 |
|
08-Jan-2006 |
Christoph Hellwig <hch@lst.de> |
[PATCH] use ptrace_get_task_struct in various places The ptrace_get_task_struct() helper that I added as part of the ptrace consolidation is useful in variety of places that currently opencode it. Switch them to the common helpers. Add a ptrace_traceme() helper that needs to be explicitly called, and simplify the ptrace_get_task_struct() interface. We don't need the request argument now, and we return the task_struct directly, using ERR_PTR() for error returns. It's a bit more code in the callers, but we have two sane routines that do one thing well now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
347a8dc3 |
|
06-Jan-2006 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: cleanup Kconfig Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
c5c3a6d8 |
|
04-Jun-2005 |
Bodo Stroesser <bstroesser@fujitsu-siemens.com> |
[PATCH] s390: uml ptrace fixes To make UML build and run on s390, I needed to do these two little changes: 1) UML includes some of the subarch's (s390) headers. I had to change one of them with the following one-liner, to make this compile. AFAICS, this change doesn't break compilation of s390 itself. 2) UML needs to intercept syscalls via ptrace to invalidate the syscall, read syscall's parameters and write the result with the result of UML's syscall processing. Also, UML needs to make sure, that the host does no syscall restart processing. On i386 for example, this can be done by writing -1 to orig_eax on the 2nd syscall interception (orig_eax is the syscall number, which after the interception is used as a "interrupt was a syscall" flag only. Unfortunately, s390 holds syscall number and syscall result in gpr2 and its "interrupt was a syscall" flag (trap) is unreachable via ptrace. So I changed the host to set trap to -1, if the syscall number is changed to an invalid value on the first syscall interception. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
778959db |
|
04-Jun-2005 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
[PATCH] s390: ptrace peek and poke The special cases of peek and poke on acrs[15] and the fpc register are not handled correctly. A poke on acrs[15] will clobber the 4 bytes after the access registers in the thread_info structure. That happens to be the kernel stack pointer. A poke on the fpc with an invalid value is not caught by the validity check. On the next context switch the broken fpc value will cause a program check in the kernel. Improving the checks in peek and poke fixes this. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
7ed20e1a |
|
01-May-2005 |
Jesper Juhl <juhl-lkml@dif.dk> |
[PATCH] convert that currently tests _NSIG directly to use valid_signal() Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
#
2fd6f58b |
|
29-Apr-2005 |
David Woodhouse <dwmw2@shinybook.infradead.org> |
[AUDIT] Don't allow ptrace to fool auditing, log arch of audited syscalls. We were calling ptrace_notify() after auditing the syscall and arguments, but the debugger could have _changed_ them before the syscall was actually invoked. Reorder the calls to fix that. While we're touching ever call to audit_syscall_entry(), we also make it take an extra argument: the architecture of the syscall which was made, because some architectures allow more than one type of syscall. Also add an explicit success/failure flag to audit_syscall_exit(), for the benefit of architectures which return that in a condition register rather than only returning a single register. Change type of syscall return value to 'long' not 'int'. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
#
1da177e4 |
|
16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
|