s390/amode31: change type of __samode31, __eamode31, etc

For consistencs reasons change the type of __samode31, __eamode31,
__stext_amode31, and __etext_amode31 to a char pointer so they
(nearly) match the type of all other sections.

This allows for code simplifications with follow-on patches.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: use generic version of arch_is_kernel_initmem_freed()

The generic version of arch_is_kernel_initmem_freed() now does the same
as s390 version.

Remove the s390 version.

Link: https://lkml.kernel.org/r/b6feb5dfe611a322de482762fc2df3a9eece70c7.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: rename dma section to amode31

The dma section name is confusing, since the code which resides within
that section has nothing to do with direct memory access. Instead the
limitation is that the code has to run in 31 bit addressing mode, and
therefore has to reside below 2GB. So the name was chosen since
ZONE_DMA is the same region.

To reduce confusion rename the section to amode31, which hopefully
describes better what this is about.

Note: this will also change vmcoreinfo strings
- SDMA=... gets renamed to SAMODE31=...
- EDMA=... gets renamed to EAMODE31=...

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

s390: correct __bootdata / __bootdata_preserved macros

Currently s390 build is broken.

SECTCMP .boot.data
error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux
make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1
SECTCMP .boot.preserved.data
error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux
make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1
make[1]: *** [bzImage] Error 2

Commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") converted all __section(foo) to __section("foo").
This is wrong for __bootdata / __bootdata_preserved macros which want
variable names to be a part of intermediate section names .boot.data.<var
name> and .boot.preserved.data.<var name>. Those sections are later
sorted by alignment + name and merged together into final .boot.data
/ .boot.preserved.data sections. Those sections must be identical in
the decompressor and the decompressed kernel (that is checked during
the build).

Fixes: 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

treewide: Convert macro and uses of __section(foo) to __section("foo")

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

locking/lockdep: check for freed initmem in static_obj()

The following warning occurred on s390:
WARNING: CPU: 0 PID: 804 at kernel/locking/lockdep.c:1025 lockdep_register_key+0x30/0x150

This is because the check in static_obj() assumes that all memory within
[_stext, _end] belongs to static objects, which at least for s390 isn't
true. The init section is also part of this range, and freeing it allows
the buddy allocator to allocate memory from it. We have virt == phys for
the kernel on s390, so that such allocations would then have addresses
within the range [_stext, _end].

To fix this, introduce arch_is_kernel_initmem_freed(), similar to
arch_is_kernel_text/data(), and add it to the checks in static_obj().
This will always return 0 on architectures that do not define
arch_is_kernel_initmem_freed. On s390, it will return 1 if initmem has
been freed and the address is in the range [__init_begin, __init_end].

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390/kernel: introduce .dma sections

With a relocatable kernel that could reside at any place in memory, code
and data that has to stay below 2 GB needs special handling.

This patch introduces .dma sections for such text, data and ex_table.
The sections will be part of the decompressor kernel, so they will not
be relocated and stay below 2 GB. Their location is passed over to the
decompressed / relocated kernel via the .boot.preserved.data section.

The duald and aste for control register setup also need to stay below
2 GB, so move the setup code from arch/s390/kernel/head64.S to
arch/s390/boot/head.S. The duct and linkage_stack could reside above
2 GB, but their content has to be preserved for the decompresed kernel,
so they are also moved into the .dma section.

The start and end address of the .dma sections is added to vmcoreinfo,
for crash support, to help debugging in case the kernel crashed there.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: introduce .boot.preserved.data section

Introduce .boot.preserve.data section which is similar to .boot.data and
"shared" between the decompressor code and the decompressed kernel. The
decompressor will store values in it, and copy over to the decompressed
image before starting it. This method allows to avoid using pre-defined
addresses and other hacks to pass values between those boot phases.

Unlike .boot.data section .boot.preserved.data is NOT a part of init data,
and hence will be preserved for the kernel life time.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: introduce .boot.data section

Introduce .boot.data section which is "shared" between the decompressor
code and the decompressed kernel. The decompressor will store values in
it, and copy over to the decompressed image before starting it. This
method allows to avoid using pre-defined addresses and other hacks to
pass values between those boot phases.

.boot.data section is a part of init data, and will be freed after kernel
initialization is complete.

For uncompressed kernel image, .boot.data section is basically the same
as .init.data

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: remove unused _ehead symbol

Since startup code now reserves memory ranges [0, PARMAREA_END] and
[_stext, <end of kernel>] _ehead symbol is not used and could be
cleaned up.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390: remove named saved segment support

Remove the support to create a z/VM named saved segment (NSS). This
feature is not supported since quite a while in favour of jump labels,
function tracing and (now) CPU alternatives. All of these features
require to write to the kernel text section which is not possible if
the kernel is contained within an NSS.

Given that memory savings are minimal if kernel images are shared and
in addition updates of shared images are painful, the NSS feature can
be removed.

Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix section name for .data..ro_after_init

A section name for .data..ro_after_init was added by both:

commit d07a980c1b8d ("s390: add proper __ro_after_init support")

and

commit d7c19b066dcf ("mm: kmemleak: scan .data.ro_after_init")

The latter adds incorrect wrapping around the existing s390 section, and
came later. I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).

Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts]
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: add proper __ro_after_init support

On s390 __ro_after_init is currently mapped to __read_mostly which
means that data marked as __ro_after_init will not be protected.

Reason for this is that the common code __ro_after_init implementation
is x86 centric: the ro_after_init data section was added to rodata,
since x86 enables write protection to kernel text and rodata very
late. On s390 we have write protection for these sections enabled with
the initial page tables. So adding the ro_after_init data section to
rodata does not work on s390.

In order to make __ro_after_init work properly on s390 move the
ro_after_init data, right behind rodata. Unlike the rodata section it
will be marked read-only later after all init calls happened.

This s390 specific implementation adds new __start_ro_after_init and
__end_ro_after_init labels. Everything in between will be marked
read-only after the init calls happened. In addition to the
__ro_after_init data move also the exception table there, since from a
practical point of view it fits the __ro_after_init requirements.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[S390] move include/asm-s390 to arch/s390/include/asm

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>