powerpc/powernv/vas: Assign real address to rx_fifo in vas_rx_win_attr

In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com

powerpc/vas: Define and use common vas_window struct

Many elements in vas_struct are used on PowerNV and PowerVM
platforms. vas_window is used for both TX and RX windows on
PowerNV and for TX windows on PowerVM. So some elements are
specific to these platforms.

So this patch defines common vas_window and platform
specific window structs (pnv_vas_window on PowerNV). Also adds
the corresponding changes in PowerNV vas code.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1698c35c158dfe52c6d2166667823d3d4a463353.camel@linux.ibm.com

powerpc/vas: Create take/drop pid and mm reference functions

Take pid and mm references when each window opens and drops during
close. This functionality is needed for powerNV and pseries. So
this patch defines the existing code as functions in common book3s
platform vas-api.c

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fa40df962250a737c804e58202924717b39e381.camel@linux.ibm.com

powerpc/vas: Add platform specific user window operations

PowerNV uses registers to open/close VAS windows, and getting the
paste address. Whereas the hypervisor calls are used on PowerVM.

This patch adds the platform specific user space window operations
and register with the common VAS user space interface.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f85091f4ace67f951ac04d60394d67b21e2f5d3c.camel@linux.ibm.com

powerpc/vas: Move VAS API to book3s common platform

The pseries platform will share vas and nx code and interfaces
with the PowerNV platform, so create the
arch/powerpc/platforms/book3s/ directory and move VAS API code
there. Functionality is not changed.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e05c8db17b9eabe3545b902d034238e4c6c08180.camel@linux.ibm.com

powerpc/vas: Fix IRQ name allocation

The VAS device allocates a generic interrupt to handle page faults but
the IRQ name doesn't show under /proc. This is because it's on
stack. Allocate the name.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org

powerpc/vas: Add VAS user space API

On power9, userspace can send GZIP compression requests directly to NX
once kernel establishes NX channel / window with VAS. This patch provides
user space API which allows user space to establish channel using open
VAS_TX_WIN_OPEN ioctl, mmap and close operations.

Each window corresponds to file descriptor and application can open
multiple windows. After the window is opened, VAS_TX_WIN_OPEN icoctl to
open a window on specific VAS instance, mmap() system call to map
the hardware address of engine's request queue into the application's
virtual address space.

Then the application can then submit one or more requests to the the
engine by using the copy/paste instructions and pasting the CRBs to
the virtual address (aka paste_address) returned by mmap().

Only NX GZIP coprocessor type is supported right now and allow GZIP
engine access via /dev/crypto/nx-gzip device node.

Thanks to Michael Ellerman for his changes and suggestions to make the
ioctl generic to support any coprocessor type.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587114121.2275.1109.camel@hbabu-laptop

powerpc/vas: Do not use default credits for receive window

System checkstops if RxFIFO overruns with more requests than the
maximum possible number of CRBs allowed in FIFO at any time. So
max credits value (rxattr.wcreds_max) is set and is passed to
vas_rx_win_open() by the the driver.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587017136.2275.1070.camel@hbabu-laptop

powerpc/vas: Return credits after handling fault

NX uses credit mechanism to control the number of requests issued on
a specific window at any point of time. Only send windows and fault
window are used credits. When the request is issued on a given window,
a credit is taken. This credit will be returned after that request is
processed. If credits are not available, returns RMA_Busy for send
window and RMA_Reject for fault window.

NX expects OS to return credit for send window after processing fault
CRB. Also credit has to be returned for fault window after handling
the fault.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587017059.2275.1064.camel@hbabu-laptop

powerpc/vas: Setup thread IRQ handler per VAS instance

When NX encounters translation error on CRB and any request buffer,
raises an interrupt on the CPU to handle the fault. It can raise one
interrupt for multiple faults. Expects OS to handle these faults and
return credits for fault window after processing faults.

Setup thread IRQ handler and IRQ thread function per each VAS instance.
IRQ handler checks if the thread is already woken up and can handle new
faults. If so returns with IRQ_HANDLED, otherwise wake up thread to
process new faults.

The thread functions reads each CRB entry from fault FIFO until sees
invalid entry. After reading each CRB, determine the corresponding
send window using pswid (from CRB) and process fault CRB. Then
invalidate the entry and return credit. Processing fault CRB and
return credit is described in subsequent patches.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016982.2275.1060.camel@hbabu-laptop

powerpc/vas: Take reference to PID and mm for user space windows

When process opens a window, its pid and tgid will be saved in the
vas_window struct. This window will be closed when the process exits.
The kernel handles NX faults by updating CSB or send SEGV signal to pid
of the process if the userspace csb addr is invalid.

In multi-thread applications, a window can be opened by a child thread,
but it will not be closed when this thread exits. It is expected that
the parent will clean up all resources including NX windows opened by
child threads. A child thread can send NX requests using this window
and could be killed before completion is reported. If the pid assigned
to this thread is reused while requests are pending, a failure SEGV
would be directed to the wrong place.

To prevent reusing the pid, take references to pid and mm when the window
is opened and release them when when the window is closed. Then if child
thread is not running, SEGV signal will be sent to thread group leader
(tgid).

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016936.2275.1057.camel@hbabu-laptop

powerpc/vas: Register NX with fault window ID and IRQ port value

For each user space send window, register NX with fault window ID
and port value so that NX paste CRBs in this fault FIFO when it
sees fault on the request buffer.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016888.2275.1054.camel@hbabu-laptop

powerpc/vas: Setup fault window per VAS instance

Setup fault window for each VAS instance. When NX gets a fault on
request buffer, pastes fault CRB in the corresponding fault FIFO and
then raises an interrupt to the OS. The kernel handles this fault
and process faults CRB from this FIFO.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016846.2275.1053.camel@hbabu-laptop

powerpc/vas: Alloc and setup IRQ and trigger port address

Allocate a xive irq on each chip with a vas instance. The NX coprocessor
raises a host CPU interrupt via vas if it encounters page fault on user
space request buffer. Subsequent patches register the trigger port with
the NX coprocessor, and create a vas fault handler for this interrupt
mapping.

Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016806.2275.1050.camel@hbabu-laptop

powerpc/powernv: remove the unused vas_win_paste_addr and vas_win_id functions

These two function have never been used anywhere in the kernel tree
since they were added to the kernel.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: clean the inclusion of stringify.h

Only include linux/stringify.h is files using __stringify()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vas: Define vas_win_id()

Define an interface to return a system-wide unique id for a given VAS
window.

The vas_win_id() will be used in a follow-on patch to generate an unique
handle for a user space receive window. Applications can use this handle
to pair send and receive windows for fast thread-wakeup.

The hardware refers to this system-wide unique id as a Partition Send
Window ID which is expected to be used during fault handling. Hence the
"pswid" in the function names.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vas: Export HVWC to debugfs

Export the VAS Window context information to debugfs.

We need to hold a mutex when closing the window to prevent a race
with the debugfs read(). Rather than introduce a per-instance mutex,
we use the global vas_mutex for now, since it is not heavily contended.

The window->cop field is only relevant to a receive window so we were
not setting it for a send window (which is is paired to a receive window
anyway). But to simplify reporting in debugfs, set the 'cop' field for the
send window also.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vas: Save configured window credits

Save the configured max window credits for a window in the vas_window
structure. We will need this when polling for return of window credits.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vas: Cleanup some debug code

Clean up vas.h and the debug code around ifdef vas_debug.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vas: Validate window credits

NX-842, the only user of VAS, sets the window credits to default values
but VAS should check the credits against the possible max values.

The VAS_WCREDS_MIN is not needed and can be dropped.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv/vas: Define copy/paste interfaces

Define interfaces (wrappers) to the 'copy' and 'paste'
instructions (which are new in PowerISA 3.0). These are intended to be
used to by NX driver(s) to submit Coprocessor Request Blocks (CRBs) to
the NX hardware engines.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv/vas: Define vas_rx_win_open() interface

Define the vas_rx_win_open() interface. This interface is intended to
be used by the Nest Accelerator (NX) driver(s) to setup receive
windows for one or more NX engines (which implement compression &
encryption algorithms in the hardware).

Follow-on patches will provide an interface to close the window and to
open a send window that kernel subsystems can use to access the NX
engines.

The interface to open a receive window is expected to be invoked for
each instance of VAS in the system.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv/vas: Define helpers to init window context

Define helpers to initialize window context registers of the VAS
hardware. These will be used in follow-on patches when opening/closing
VAS windows.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv/vas: Define vas_init() and vas_exit()

Implement vas_init() and vas_exit() functions for a new VAS module.
This VAS module is essentially a library for other device drivers
and kernel users of the NX coprocessors like NX-842 and NX-GZIP.
In the future this will be extended to add support for user space
to access the NX coprocessors.

VAS is currently only supported with 64K page size.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv/vas: Define macros, register fields and structures

Define macros for the VAS hardware registers and bit-fields as well
as couple of data structures needed by the VAS driver.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[mpe: Fixup include guard to use _ASM_POWERPC_VAS_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>