powerpc/qspinlock: powerpc qspinlock implementation

Add a powerpc specific implementation of queued spinlocks. This is the
build framework with a very simple (non-queued) spinlock implementation
to begin with. Later changes add queueing, and other features and
optimisations one-at-a-time. It is done this way to more easily see how
the queued spinlocks are built, and to make performance and correctness
bisects more useful.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop paravirt.h & processor.h changes to fix 32-bit build]
[mpe: Fix 32-bit build of qspinlock.o & disallow GENERIC_LOCKBREAK per Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/CONLLQB6DCJU.2ZPOS7T6S5GRR@bobo

locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h

The printk header file includes ratelimit_types.h for its __ratelimit()
based usage. It is required for the static initializer used in
printk_ratelimited(). It uses a raw_spinlock_t and includes the
spinlock_types.h.

PREEMPT_RT substitutes spinlock_t with a rtmutex based implementation and so
its spinlock_t implmentation (provided by spinlock_rt.h) includes rtmutex.h and
atomic.h which leads to recursive includes where defines are missing.

By including only the raw_spinlock_t defines it avoids the atomic.h
related includes at this stage.

An example on powerpc:

| CALL scripts/atomic/check-atomics.sh
|In file included from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|arch/powerpc/include/asm/page_32.h: In function ‘clear_page’:
|arch/powerpc/include/asm/bug.h:87:4: error: implicit declaration of function â=80=98__WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 87 | __WARN(); \
| | ^~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro ‘WARN_ONâ€=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|arch/powerpc/include/asm/bug.h:58:17: error: invalid application of ‘sizeofâ€=99 to incomplete type ‘struct bug_entryâ€=99
| 58 | "i" (sizeof(struct bug_entry)), \
| | ^~~~~~
|arch/powerpc/include/asm/bug.h:89:3: note: in expansion of macro ‘BUG_ENTRYâ€=99
| 89 | BUG_ENTRY(PPC_TLNEI " %4, 0", \
| | ^~~~~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro ‘WARN_ONâ€=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|In file included from arch/powerpc/include/asm/ptrace.h:298,
| from arch/powerpc/include/asm/hw_irq.h:12,
| from arch/powerpc/include/asm/irqflags.h:12,
| from include/linux/irqflags.h:16,
| from include/asm-generic/cmpxchg-local.h:6,
| from arch/powerpc/include/asm/cmpxchg.h:526,
| from arch/powerpc/include/asm/atomic.h:11,
| from include/linux/atomic.h:7,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/asm-generic/bug.h:22,
| from arch/powerpc/include/asm/bug.h:109,
| from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|include/linux/thread_info.h: In function â=80=98copy_overflowâ=80=99:
|include/linux/thread_info.h:210:2: error: implicit declaration of function â=80=98WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 210 | WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
| | ^~~~

The WARN / BUG include pulls in printk.h and then ptrace.h expects WARN
(from bug.h) which is not yet complete. Even hw_irq.h has WARN_ON()
statements.

On POWERPC64 there are missing atomic64 defines while building 32bit
VDSO:
| VDSO32C arch/powerpc/kernel/vdso32/vgettimeofday.o
|In file included from include/linux/atomic.h:80,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/linux/kernel.h:19,
| from arch/powerpc/include/asm/page.h:11,
| from arch/powerpc/include/asm/vdso/gettimeofday.h:5,
| from include/vdso/datapage.h:137,
| from lib/vdso/gettimeofday.c:5,
| from <command-line>:
|include/linux/atomic-arch-fallback.h: In function ‘arch_atomic64_incâ€=99:
|include/linux/atomic-arch-fallback.h:1447:2: error: implicit declaration of function ‘arch_atomic64_add’; did you mean ‘arch_atomic_add’? [-Werror=3Dimpl
|icit-function-declaration]
| 1447 | arch_atomic64_add(1, v);
| | ^~~~~~~~~~~~~~~~~
| | arch_atomic_add

The generic fallback is not included, atomics itself are not used. If
kernel.h does not include printk.h then it comes later from the bug.h
include.

Allow asm/spinlock_types.h to be included from
linux/spinlock_types_raw.h.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211129174654.668506-12-bigeasy@linutronix.de

powerpc/64s: Implement queued spinlocks and rwlocks

These have shown significantly improved performance and fairness when
spinlock contention is moderate to high on very large systems.

With this series including subsequent patches, on a 16 socket 1536
thread POWER9, a stress test such as same-file open/close from all
CPUs gets big speedups, 11620op/s aggregate with simple spinlocks vs
384158op/s (33x faster), where the difference in throughput between
the fastest and slowest thread goes from 7x to 1.4x.

Thanks to the fast path being identical in terms of atomics and
barriers (after a subsequent optimisation patch), single threaded
performance is not changed (no measurable difference).

On smaller systems, performance and fairness seems to be generally
improved. Using dbench on tmpfs as a test (that starts to run into
kernel spinlock contention), a 2-socket OpenPOWER POWER9 system was
tested with bare metal and KVM guest configurations. Results can be
found here:

https://github.com/linuxppc/issues/issues/305#issuecomment-663487453

Observations are:

- Queued spinlocks are equal when contention is insignificant, as
expected and as measured with microbenchmarks.

- When there is contention, on bare metal queued spinlocks have better
throughput and max latency at all points.

- When virtualised, queued spinlocks are slightly worse approaching
peak throughput, but significantly better throughput and max latency
at all points beyond peak, until queued spinlock maximum latency
rises when clients are 2x vCPUs.

The regressions haven't been analysed very well yet, there are a lot
of things that can be tuned, particularly the paravirtualised locking,
but the numbers already look like a good net win even on relatively
small systems.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-4-npiggin@gmail.com

powerpc: Move spinlock implementation to simple_spinlock

To prepare for queued spinlocks. This is a simple rename except to
update preprocessor guard name and a file reference.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131423.1362108-3-npiggin@gmail.com

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking: Convert raw_rwlock to arch_rwlock

Not strictly necessary for -rt as -rt does not have non sleeping
rwlocks, but it's odd to not have a consistent naming convention.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org

locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKED

Further name space cleanup. No functional change

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org

locking: Convert raw_spinlock to arch_spinlock

The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org

powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc. This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>