ocxl: Initiate a TLB invalidate command

When a TLB Invalidate is required for the Logical Partition, the following
sequence has to be performed:

1. Load MMIO ATSD AVA register with the necessary value, if required.
2. Write the MMIO ATSD launch register to initiate the TLB Invalidate
command.
3. Poll the MMIO ATSD status register to determine when the TLB Invalidate
has been completed.

Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201125155013.39955-3-clombard@linux.vnet.ibm.com

ocxl: Assign a register set to a Logical Partition

Platform specific function to assign a register set to a Logical Partition.
The "ibm,mmio-atsd" property, provided by the firmware, contains the 16
base ATSD physical addresses (ATSD0 through ATSD15) of the set of MMIO
registers (XTS MMIO ATSDx LPARID/AVA/launch/status register).

For the time being, the ATSD0 set of registers is used by default.

Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201125155013.39955-2-clombard@linux.vnet.ibm.com

ocxl: Remove custom service to allocate interrupts

We now allocate interrupts through xive directly.

Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-5-fbarrat@linux.ibm.com

ocxl: Remove unnecessary externs

Function declarations don't need externs, remove the existing ones
so they are consistent with newer code

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200415012343.919255-2-alastair@d-silva.org

powerpc: Use the correct style for SPDX License Identifier

This patch corrects the SPDX License Identifier style
in the powerpc Hardware Architecture related files.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

ocxl: Rename pnv_ocxl_spa_remove_pe to clarify it's action

The function removes the process element from NPU cache.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

ocxl: Add AFU interrupt support

Add user APIs through ioctl to allocate, free, and be notified of an
AFU interrupt.

For opencapi, an AFU can trigger an interrupt on the host by sending a
specific command targeting a 64-bit object handle. On POWER9, this is
implemented by mapping a special page in the address space of a
process and a write to that page will trigger an interrupt.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Capture actag information for the device

In the opencapi protocol, host memory contexts are referenced by a
'actag'. During setup, a driver must tell the device how many actags
it can used, and what values are acceptable.

On POWER9, the NPU can handle 64 actags per link, so they must be
shared between all the PCI functions of the link. To get a global
picture of how many actags are used by each AFU of every function, we
capture some data at the end of PCI enumeration, so that actags can be
shared fairly if needed.

This is not powernv specific per say, but rather a consequence of the
opencapi configuration specification being quite general. The number
of available actags on POWER9 makes it more likely to be hit. This is
somewhat mitigated by the fact that existing AFUs are coded by
requesting a reasonable count of actags and existing devices carry
only one AFU.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add platform-specific services for opencapi

Implement a few platform-specific calls which can be used by drivers:

- provide the Transaction Layer capabilities of the host, so that the
driver can find some common ground and configure the device and host
appropriately.

- provide the hw interrupt to be used for translation faults raised by
the NPU

- map/unmap some NPU mmio registers to get the fault context when the
NPU raises an address translation fault

The rest are wrappers around the previously-introduced opal calls.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>