#
1f92a844 |
|
22-Sep-2023 |
Thomas Zimmermann <tzimmermann@suse.de> |
powerpc: Remove file parameter from phys_mem_access_prot() Remove 'file' parameter from struct machdep_calls.phys_mem_access_prot and its implementation in pci_phys_mem_access_prot(). The file is not used on PowerPC. By removing it, a later patch can simplify fbdev's mmap code, which uses phys_mem_access_prot() on PowerPC. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> [mpe: Rebase on unrelated changes to phys_mem_access_prot()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230922080636.26762-5-tzimmermann@suse.de
|
#
54f30b83 |
|
27-Jul-2023 |
Arnd Bergmann <arnd@arndb.de> |
powerpc: address missing-prototypes warnings There are a few warnings in powerpc64 defconfig builds after -Wmissing-prototypes gets promoted from W=1 to the default warning set: arch/powerpc/mm/book3s64/pgtable.c:422:6: error: no previous prototype for 'arch_report_meminfo' [-Werror=missing-prototypes] arch/powerpc/platforms/cell/ras.c:275:5: error: no previous prototype for 'cbe_sysreset_hack' [-Werror=missing-prototypes] arch/powerpc/platforms/cell/spu_manage.c:29:21: error: no previous prototype for 'spu_devnode' [-Werror=missing-prototypes] arch/powerpc/platforms/pasemi/time.c:12:17: error: no previous prototype for 'pas_get_boot_time' [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/feature.c:1532:13: error: no previous prototype for 'g5_phy_disable_cpu1' [-Werror=missing-prototypes] arch/powerpc/platforms/86xx/pic.c:28:13: error: no previous prototype for 'mpc86xx_init_irq' [-Werror=missing-prototypes] drivers/pci/pci-sysfs.c:936:13: error: no previous prototype for 'pci_adjust_legacy_attr' [-Werror=missing-prototypes] Address these by including the right header files or marking the functions static. The audit.c one is a bit tricky since compat_audit.h cannot include regular kernel headers tht have conflicting types on 32-bit powerpc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [mpe: Drop change to __vmemmap_free() which only exists in mm] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230727122720.2558065-1-arnd@kernel.org
|
#
4d5c5bad |
|
08-Jul-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.h asm/pci.h and asm/mpc52xx.h don't need asm/prom.h Declare struct device_node locally to avoid including of.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add missing include of prom.h to of_rtc.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cf5243343e2364c2b40f22ee5ad9a6e2453d1121.1657264228.git.christophe.leroy@csgroup.eu
|
#
ae85b23c |
|
22-Jul-2022 |
Stafford Horne <shorne@gmail.com> |
PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h pci_get_legacy_ide_irq() is only used on platforms that support PNP, so many architectures define it but never use it. Replace uses of it with ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same functionality. Since pci_get_legacy_ide_irq() is no longer used, remove all the architecture-specific definitions of it as well as asm-generic/pci.h, which only provides pci_get_legacy_ide_irq() [bhelgaas: commit log] Co-developed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
#
d276960d |
|
16-Dec-2021 |
Nick Child <nick.child@ibm.com> |
powerpc/kernel: Add __init attribute to eligible functions Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
|
#
562d1e20 |
|
26-Mar-2021 |
Christoph Hellwig <hch@lst.de> |
powerpc/powernv: remove the nvlink support This code was only used by the vfio-nvlink2 code, which itself had no proper use. Drop this huge chunk of code build into every powernv or generic build. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de
|
#
0a0f0d8b |
|
22-Sep-2020 |
Christoph Hellwig <hch@lst.de> |
dma-mapping: split <linux/dma-mapping.h> Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
|
#
1c7f4fe8 |
|
28-Oct-2019 |
Oliver O'Halloran <oohall@gmail.com> |
powerpc/pci: Remove pcibios_setup_bus_devices() With the previous patch applied pcibios_setup_device() will always be run when pcibios_bus_add_device() is called. There are several code paths where pcibios_setup_bus_device() is still called (the PowerPC specific PCI hotplug support is one) so with just the previous patch applied the setup can be run multiple times on a device, once before the device is added to the bus and once after. There's no need to run the setup in the early case any more so just remove it entirely. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191028085424.12006-3-oohall@gmail.com
|
#
b8074aa2 |
|
29-Jul-2019 |
Denis Efremov <efremov@linux.com> |
PCI: Convert pci_resource_to_user() to a weak function Convert pci_resource_to_user() to a weak function so the existing architecture-specific implementations will automatically override the generic one. This allows us to remove HAVE_ARCH_PCI_RESOURCE_TO_USER definitions and avoid the conditional compilation for this single function. Link: https://lore.kernel.org/r/20190729101401.28068-1-efremov@linux.com Link: https://lore.kernel.org/r/20190729101401.28068-2-efremov@linux.com Link: https://lore.kernel.org/r/20190729101401.28068-3-efremov@linux.com Link: https://lore.kernel.org/r/20190729101401.28068-4-efremov@linux.com Link: https://lore.kernel.org/r/20190729101401.28068-5-efremov@linux.com Link: https://lore.kernel.org/r/20190729101401.28068-6-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> [bhelgaas: squash into one commit] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
|
#
2874c5fd |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
7c1013b4 |
|
13-Feb-2019 |
Christoph Hellwig <hch@lst.de> |
powerpc/dma: remove get_pci_dma_ops This function is only used by the Cell iommu code, which can keep track if it is using the iommu internally just as good. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
0bd97167 |
|
19-Dec-2018 |
Alexey Kardashevskiy <aik@ozlabs.ru> |
powerpc/powernv/npu: Add compound IOMMU groups At the moment the powernv platform registers an IOMMU group for each PE. There is an exception though: an NVLink bridge which is attached to the corresponding GPU's IOMMU group making it a master. Now we have POWER9 systems with GPUs connected to each other directly bypassing PCI. At the moment we do not control state of these links so we have to put such interconnected GPUs to one IOMMU group which means that the old scheme with one GPU as a master won't work - there will be up to 3 GPUs in such group. This introduces a npu_comp struct which represents a compound IOMMU group made of multiple PEs - PCI PEs (for GPUs) and NPU PEs (for NVLink bridges). This converts the existing NVLink1 code to use the new scheme. >From now on, each PE must have a valid iommu_table_group_ops which will either be called directly (for a single PE group) or indirectly from a compound group handlers. This moves IOMMU group registration for NVLink-connected GPUs to npu-dma.c. For POWER8, this stores a new compound group pointer in the PE (so a GPU is still a master); for POWER9 the new group pointer is stored in an NPU (which is allocated per a PCI host controller). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [mpe: Initialise npdev to NULL in pnv_try_setup_npu_table_group()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
0e759bd7 |
|
19-Dec-2018 |
Alexey Kardashevskiy <aik@ozlabs.ru> |
powerpc/powernv/npu: Move OPAL calls away from context manipulation When introduced, the NPU context init/destroy helpers called OPAL which enabled/disabled PID (a userspace memory context ID) filtering in an NPU per a GPU; this was a requirement for P9 DD1.0. However newer chip revision added a PID wildcard support so there is no more need to call OPAL every time a new context is initialized. Also, since the PID wildcard support was added, skiboot does not clear wildcard entries in the NPU so these remain in the hardware till the system reboot. This moves LPID and wildcard programming to the PE setup code which executes once during the booting process so NPU2 context init/destroy won't need to do additional configuration. This replaces the check for FW_FEATURE_OPAL with a check for npu!=NULL as this is the way to tell if the NPU support is present and configured. This moves pnv_npu2_init() declaration as pseries should be able to use it. This keeps pnv_npu2_map_lpar() in powernv as pseries is not allowed to call that. This exports pnv_npu2_map_lpar_dev() as following patches will use it from the VFIO driver. While at it, replace redundant list_for_each_entry_safe() with a simpler list_for_each_entry(). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
325ef185 |
|
12-Apr-2018 |
Christoph Hellwig <hch@lst.de> |
PCI: remove PCI_DMA_BUS_IS_PHYS This was used by the ide, scsi and networking code in the past to determine if they should bounce payloads. Now that the dma mapping always have to support dma to all physical memory (thanks to swiotlb for non-iommu systems) there is no need to this crude hack any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv) Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
#
28f8f183 |
|
18-Feb-2018 |
David Woodhouse <dwmw@amazon.co.uk> |
powerpc/pci: Use generic pci_mmap_resource_range() Commit f719582435 ("PCI: Add pci_mmap_resource_range() and use it for ARM64") added this generic function with the intent of using it everywhere and ultimately killing the old arch-specific implementations. Remove the powerpc-specific pci_mmap_page_range() and use the generic pci_mmap_resource_range() instead. Powerpc can mmap I/O port space, so supply the powerpc-specific pci_iobar_pfn() required to make that work. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
|
#
fc5f6221 |
|
05-Jan-2018 |
Bryant G. Ly <bryantly@linux.vnet.ibm.com> |
powerpc/pseries: Add Initialization of VF Bars When enabling SR-IOV in pseries platform, the VF bar properties for a PF are reported on the device node in the device tree. This patch adds the IOV Bar resources to Linux structures from the device tree for later use when configuring SR-IOV by PF driver. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
be2d877a |
|
04-Oct-2017 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: Remove redundant pci_dev, pci_bus, resource declarations <linux/pci.h> defines struct pci_bus and struct pci_dev and includes the struct resource definition before including <asm/pci.h>. Nobody includes <asm/pci.h> directly, so they don't need their own declarations. Remove the redundant struct pci_dev, pci_bus, resource declarations. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # CRIS Acked-by: Ralf Baechle <ralf@linux-mips.org> # MIPS
|
#
e854d8b2 |
|
12-Apr-2017 |
David Woodhouse <dwmw@amazon.co.uk> |
PCI: Add arch_can_pci_mmap_io() on architectures which can mmap() I/O space This is relatively esoteric, and knowing that we don't have it makes life easier in some cases rather than just an eventual -EINVAL from pci_mmap_page_range(). Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
11df1954 |
|
12-Apr-2017 |
David Woodhouse <dwmw@amazon.co.uk> |
PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h> We can declare it <linux/pci.h> even on platforms where it isn't going to be defined. There's no need to have it littered through the various <asm/pci.h> files. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
ae749c7a |
|
12-Apr-2017 |
David Woodhouse <dwmw@amazon.co.uk> |
PCI: Add arch_can_pci_mmap_wc() macro Most of the almost-identical versions of pci_mmap_page_range() silently ignore the 'write_combine' argument and give uncached mappings. Yet we allow the PCIIOC_WRITE_COMBINE ioctl in /proc/bus/pci, expose the 'resourceX_wc' file in sysfs, and allow an attempted mapping to apparently succeed. To fix this, introduce a macro arch_can_pci_mmap_wc() which indicates whether the platform can do a write-combining mapping. On x86 this ends up being pat_enabled(), while the few other platforms that support it can just set it to a literal '1'. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
5299709d |
|
20-Jan-2017 |
Bart Van Assche <bvanassche@acm.org> |
treewide: Constify most dma_map_ops structures Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
|
#
8221a013 |
|
17-Jun-2016 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: Unify pci_resource_to_user() declarations Replace the pci_resource_to_user() declarations in each arch that defines HAVE_ARCH_PCI_RESOURCE_TO_USER with a single one in linux/pci.h. Change the MIPS static inline implementation to a non-inline version so the static inline doesn't conflict with the new non-static linux/pci.h declaration. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
bc4b024a |
|
07-Mar-2016 |
Christoph Hellwig <hch@lst.de> |
PCI: Move pci_dma_* helpers to common code For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
5d2aa710 |
|
16-Dec-2015 |
Alistair Popple <alistair@popple.id.au> |
powerpc/powernv: Add support for Nvlink NPUs NVLink is a high speed interconnect that is used in conjunction with a PCI-E connection to create an interface between CPU and GPU that provides very high data bandwidth. A PCI-E connection to a GPU is used as the control path to initiate and report status of large data transfers sent via the NVLink. On IBM Power systems the NVLink processing unit (NPU) is similar to the existing PHB3. This patch adds support for a new NPU PHB type. DMA operations on the NPU are not supported as this patch sets the TCE translation tables to be the same as the related GPU PCIe device for each NVLink. Therefore all DMA operations are setup and controlled via the PCIe device. EEH is not presently supported for the NPU devices, although it may be added in future. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
01d72a95 |
|
04-Jun-2015 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: Remove unused pci_dma_burst_advice() pci_dma_burst_advice() was added by e24c2d963a60 ("[PATCH] PCI: DMA bursting advice") but apparently never used. Remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <monstr@monstr.eu> # microblaze CC: David S. Miller <davem@davemloft.net>
|
#
84be456f |
|
30-Apr-2015 |
Christoph Hellwig <hch@lst.de> |
remove <asm/scatterlist.h> We don't have any arch specific scatterlist now that parisc switched over to the generic one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
|
#
467efc2e |
|
30-Mar-2015 |
Daniel Axtens <dja@axtens.net> |
powerpc: Remove shims for pci_controller_ops operations Remove shims, patch callsites to use pci_controller_ops versions instead. Also move back the probe mode defines, as explained in the patch for pci_probe_mode. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
ff9df8c8 |
|
30-Mar-2015 |
Daniel Axtens <dja@axtens.net> |
powerpc: Create pci_controller_ops.probe_mode and shim Add pci_controller_ops.probe_mode, shadowing ppc_md.pci_probe_mode. Add a shim, and changes the callsites to use the shim. We also need to move the probe mode defines to pci-bridge.h from pci.h. They are required by the shim in order to return a sensible default. Previously, the were defined in pci.h, but pci.h includes pci-bridge.h before the relevant #defines. This means the definitions are absent if pci.h is included before pci-bridge.h. This occurs in some drivers. So, move the definitons now, and move them back when we remove the shim. Anything that wants the defines would have had to include pci.h, and since pci.h includes pci-bridge.h, nothing will lose access to the defines. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
a43ae58c |
|
05-May-2014 |
Hanjun Guo <guohanjun@huawei.com> |
PCI: Turn pcibios_penalize_isa_irq() into a weak function pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA is not used by some architectures. Make pcibios_penalize_isa_irq() a __weak function to simplify the code. This removes the need for new platforms to add stub implementations of pcibios_penalize_isa_irq(). [bhelgaas: changelog, comments] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
4287d824 |
|
09-Aug-2013 |
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
#
38973ba7 |
|
16-Mar-2012 |
Bjorn Helgaas <bhelgaas@google.com> |
powerpc/PCI: compute I/O space bus-to-resource offset consistently Make sure we compute CPU addresses (resource start/end) the same way both when we set up the I/O aperture (hose->io_resource) and when we use pcibios_bus_to_resource() to convert BAR values into resources. This fixes a build failure ("cast from pointer to integer of different size" in configs where resource_size_t is 64 bits but pointers are 32 bits) I introduced in 6c5705fec63d. Acked-By: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
fb127cb9 |
|
23-Feb-2012 |
Bjorn Helgaas <bhelgaas@google.com> |
PCI: collapse pcibios_resource_to_bus Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
6c5705fe |
|
23-Feb-2012 |
Bjorn Helgaas <bhelgaas@google.com> |
powerpc/PCI: get rid of device resource fixups Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
#
79c8be83 |
|
28-Oct-2011 |
Myron Stowe <mstowe@redhat.com> |
PCI: PowerPC: convert pcibios_set_master() to a non-inlined function This patch converts PowerPC's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow PowerPC's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
4666ca2a |
|
29-Nov-2011 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/pci: Make pci_read_irq_line() static It's only used inside the same file where it's defined. There's also no point exporting it anymore. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
0e47ff1c |
|
12-Jul-2011 |
Rob Herring <rob.herring@calxeda.com> |
powerpc: rename ppc_pci_*_flags to pci_*_flags This renames pci flags functions and enums in preparation for creating generic version in asm-generic/pci-bridge.h. The following search and replace is done: s/ppc_pci_/pci_/ s/PPC_PCI_/PCI_/ Direct accesses to ppc_pci_flag variable are replaced with helper functions. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
|
#
98d9f30c8 |
|
10-Apr-2011 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
pci/of: Match PCI devices to OF nodes dynamically powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
b5d937de |
|
04-Feb-2011 |
Grant Likely <grant.likely@secretlab.ca> |
powerpc/pci: Make both ppc32 and ppc64 use sysdata for pci_controller Currently, ppc32 uses sysdata for the pci_controller pointer, and ppc64 uses it to hold the device_node pointer. This patch moves the of_node pointer into (struct pci_bus*)->dev.of_node and (struct pci_dev*)->dev.of_node so that sysdata can be converted to always use the pci_controller pointer instead. It also fixes up the allocating of pci devices so that the of_node pointer gets assigned consistently and increments the ref count. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
f41b1771 |
|
10-Mar-2010 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
pci-dma: add linux/pci-dma.h to linux/pci.h All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
af407c6d |
|
10-Mar-2010 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
pci-dma: powerpc: use include/linux/pci-dma.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
a7db5040 |
|
22-Jun-2009 |
Alex Chiang <achiang@hp.com> |
PCI: remove pcibios_scan_all_fns() This was #define'd as 0 on all platforms, so let's get rid of it. This change makes pci_scan_slot() slightly easier to read. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
0ed2c722 |
|
28-Aug-2009 |
Grant Likely <grant.likely@secretlab.ca> |
powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() The two versions are doing almost exactly the same thing. No need to maintain them as separate files. This patch also has the side effect of making the PCI device tree scanning code available to 32 bit powerpc machines, but no board ports actually make use of this feature at this point. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
fbe65447 |
|
25-Aug-2009 |
Grant Likely <grant.likely@secretlab.ca> |
powerpc/pci: move pci_64.c device tree scanning code into pci-common.c The PCI device tree scanning code in pci_64.c is some useful functionality. It allows PCI devices to be described in the device tree instead of being probed for, which in turn allows pci devices to use all of the device tree facilities to describe complex PCI bus architectures like GPIO and IRQ routing (perhaps not a common situation for desktop or server systems, but useful for embedded systems with on-board PCI devices). This patch moves the device tree scanning into pci-common.c so it is available for 32-bit powerpc machines too. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
45223c54 |
|
04-Aug-2009 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
powerpc: use dma_map_ops struct This converts uses dma_map_ops struct (in include/linux/dma-mapping.h) instead of POWERPC homegrown dma_mapping_ops. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
a6c14096 |
|
17-Jun-2009 |
Matthew Wilcox <willy@infradead.org> |
Delete pcibios_select_root This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
11df1f05 |
|
18-Jan-2009 |
Michael Ellerman <michael@ellerman.id.au> |
PCI/MSI: Use #ifdefs instead of weak functions Weak functions aren't all they're cracked up to be. They lead to incorrect binaries with some toolchains, they require us to have empty functions we otherwise wouldn't, and the unused code is not elided (as of gcc 4.3.2 anyway). So replace the weak MSI arch hooks with the #define foo foo idiom. We no longer need empty versions of arch_setup/teardown_msi_irq(). This is less source (by 1 line!), and results in smaller binaries too: text data bss dec hex filename 9354300 1693916 678424 11726640 b2ef30 build/powerpc/vmlinux-before 9354052 1693852 678424 11726328 b2edf8 build/powerpc/vmlinux-after Also smaller on x86_64 and arm (iop13xx). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
7fe519c2 |
|
11-Dec-2008 |
Josh Boyer <jwboyer@linux.vnet.ibm.com> |
powerpc: Introduce ppc_pci_flags accessors Currently there are a number of platforms that open code access to the ppc_pci_flags global variable. However, that variable is not present if CONFIG_PCI is not set, which can lead to a build break. This introduces a number of accessor functions that are defined to be empty in the case of CONFIG_PCI being disabled. The various platform files in the kernel are updated to use these. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
fd6852c8 |
|
27-Oct-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/pci: Fix various pseries PCI hotplug issues The pseries PCI hotplug code has a number of issues, ranging from incorrect resource setup to crashes, depending on what is added, when, whether it contains a bridge, etc etc.... This fixes a whole bunch of these, while actually simplifying the code a bit, using more generic code in the process and factoring out common code between adding of a PHB, a slot or a device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
8b8da358 |
|
27-Oct-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup Currently, our PCI code uses the pcibios_fixup_bus() callback, which is called by the generic code when probing PCI buses, for two different things. One is to set up things related to the bus itself, such as reading bridge resources for P2P bridges, fixing them up, or setting up the iommu's associated with bridges on some platforms. The other is some setup for each individual device under that bridge, mostly setting up DMA mappings and interrupts. The problem is that this approach doesn't work well with PCI hotplug when an existing bus is re-probed for new children. We fix this problem by splitting pcibios_fixup_bus into two routines: pcibios_setup_bus_self() is now called to setup the bus itself pcibios_setup_bus_devices() is now called to setup devices pcibios_fixup_bus() is then modified to call these two after reading the bridge bases, and the OF based PCI probe is modified to avoid calling into the first one when rescanning an existing bridge. [paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c is including it unconditionally.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
ab56ced9 |
|
27-Oct-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/pci: Remove pcibios_do_bus_setup() The function pcibios_do_bus_setup() was used by pcibios_fixup_bus() to perform setup that is different between the 32-bit and 64-bit code. This difference no longer exists, thus the function is removed and the setup now done directly from pci-common.c. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
e90a1318 |
|
27-Oct-2008 |
Nathan Fontenot <nfont@austin.ibm.com> |
powerpc/pci: Properly allocate bus resources for hotplug PHBs Resources for PHB's that are dynamically added to a system are not properly allocated in the resource tree. Not having these resources allocated causes an oops when removing the PHB when we try to release them. The diff appears a bit messy, this is mainly due to moving everything one tab to the left in the pcibios_allocate_bus_resources routine. The functionality change in this routine is only that the list_for_each_entry() loop is pulled out and moved to the necessary calling routine. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
e9f82cb7 |
|
13-Oct-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/PCI: Add legacy PCI access via sysfs This patch adds support for legacy_io and legacy_mem files in bus class directories in sysfs for powerpc Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
#
4fc665b8 |
|
12-Sep-2008 |
Becky Bruce <becky.bruce@freescale.com> |
powerpc: Merge 32 and 64-bit dma code We essentially adopt the 64-bit dma code, with some changes to support 32-bit systems, including HIGHMEM. dma functions on 32-bit are now invoked via accessor functions which call the correct op for a device based on archdata dma_ops. If there is no archdata dma_ops, this defaults to dma_direct_ops. In addition, the dma_map/unmap_page functions are added to dma_ops because we can't just fall back on map/unmap_single when HIGHMEM is enabled. In the case of dma_direct_*, we stop using map/unmap_single and just use the page version - this saves a lot of ugly ifdeffing. We leave map/unmap_single in the dma_ops definition, though, because they are needed by the iommu code, which does not implement map/unmap_page. Ideally, going forward, we will completely eliminate map/unmap_single and just have map/unmap_page, if it's workable for 64-bit. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
b8b572e1 |
|
31-Jul-2008 |
Stephen Rothwell <sfr@canb.auug.org.au> |
powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|