tty: hvc: convert to u8 and size_t

Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux.dev
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20231206073712.17776-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/opal: Annotate out param endianness

Sparse reports an endian mismatch with args to opal_int_get_xirr().
Checking the skiboot source[1] shows the function takes a __be32*
(as expected), so update the function declaration to reflect this.

[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3479

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-9-bgray@linux.ibm.com

powerpc/powernv/pci: Remove MVE code

With IODA1 support gone the OPAL calls to set MVE are dead code. Remove
them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230613045202.294451-3-joel@jms.id.au

powerpc/powernv: remove orphan declarations from opal.h

Remove the following orphan declarations from opal.h:
1. opal_notifier_register()
2. opal_notifier_unregister()
3. opal_notifier_update_evt()
4. opal_notifier_enable()
5. opal_notifier_disable()

They have been removed since commit 81f2f7ce4c5b ("opal:
Remove events notifier"), so remove them.

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913075029.682327-7-cuigaosheng1@huawei.com

powerpc/powernv: Add __init attribute to eligible functions

Some functions defined in 'arch/powerpc/platforms/powernv' are
deserving of an `__init` macro attribute. These functions are only
called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.

Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-12-nick.child@ibm.com

powerpc/powernv: remove the nvlink support

This code was only used by the vfio-nvlink2 code, which itself had no
proper use. Drop this huge chunk of code build into every powernv
or generic build.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de

powerpc/powernv: Fix type of opal_mpipl_query_tag() addr argument

opal_mpipl_query_tag() takes a pointer to a 64-bit value, which firmware
writes a value to. As OPAL is traditionally big endian this value will
be big endian.

This can be confirmed by looking at the implementation in skiboot:

static uint64_t opal_mpipl_query_tag(enum opal_mpipl_tags tag, __be64 *tag_val)
{
...
*tag_val = cpu_to_be64(opal_mpipl_tags[tag]);
return OPAL_SUCCESS;
}

Fix the declaration to annotate that the value is big endian.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421125402.1955013-2-mpe@ellerman.id.au

powerpc/powernv: Add OPAL API interface to access secure variable

The X.509 certificates trusted by the platform and required to secure
boot the OS kernel are wrapped in secure variables, which are
controlled by OPAL.

This patch adds firmware/kernel interface to read and write OPAL
secure variables based on the unique key.

This support can be enabled using CONFIG_OPAL_SECVAR.

Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
[mpe: Make secvar_ops __ro_after_init, only build opal-secvar.c if PPC_SECURE_BOOT=y]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-2-git-send-email-nayna@linux.ibm.com

powerpc/opal: add MPIPL interface definitions

MPIPL is Memory Preserving IPL supported from POWER9. This enables the
kernel to reset the system with memory 'preserved'. Also, it supports
copying memory from a source address to some destination address during
MPIPL boot. Add MPIPL interface definitions here to leverage these f/w
features in adding FADump support for PowerNV platform.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821340710.5656.10071829040515662624.stgit@hbathini.in.ibm.com

powerpc/xive: Fix bogus error code returned by OPAL

There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.

A fix was recently merged in skiboot:

e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")

but we need a workaround anyway to support older skiboots already
in the field.

Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821713818.1985334.14123187368108582810.stgit@bahia.lan

powerpc/powernv: remove the unused pnv_pci_set_p2p function

This function has never been used anywhere in the kernel tree since it
was added to the tree. We also now have proper PCIe P2P APIs in the core
kernel, and any new P2P support should be using those.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hmi: Fix kernel hang when TB is in error state.

On TOD/TB errors timebase register stops/freezes until HMI error recovery
gets TOD/TB back into running state. On successful recovery, TB starts
running again and udelay() that relies on TB value continues to function
properly. But in case when HMI fails to recover from TOD/TB errors, the
TB register stay freezed. With TB not running the __delay() function
keeps looping and never return. If __delay() is called while in panic
path then system hangs and never reboots after panic.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/xive: add OPAL extensions for the XIVE native exploitation support

The support for XIVE native exploitation mode in Linux/KVM needs a
couple more OPAL calls to get and set the state of the XIVE internal
structures being used by a sPAPR guest.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Move opal_power_control_init() call in opal_init().

opal_power_control_init() depends on opal message notifier to be
initialized, which is done in opal_init()->opal_message_init(). But both
these initialization are called through machine initcalls and it all
depends on in which order they being called. So far these are called in
correct order (may be we got lucky) and never saw any issue. But it is
clearer to control initialization order explicitly by moving
opal_power_control_init() into opal_init().

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: provide a console flush operation for opal hvc driver

Provide the flush hv_op for the opal hvc driver. This will flush the
firmware console buffers without spinning with interrupts disabled.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

crypto/nx: Initialize 842 high and normal RxFIFO control registers

NX increments readOffset by FIFO size in receive FIFO control register
when CRB is read. But the index in RxFIFO has to match with the
corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX
may be processing incorrect CRBs and can cause CRB timeout.

VAS FIFO offset is 0 when the receive window is opened during
initialization. When the module is reloaded or in kexec boot, readOffset
in FIFO control register may not match with VAS entry. This patch adds
nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO
control register for both high and normal FIFOs.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
[mpe: Fixup uninitialized variable warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add support to enable sensor groups

Adds support to enable/disable a sensor group at runtime. This
can be used to select the sensor groups that needs to be copied to
main memory by OCC. Sensor groups like power, temperature, current,
voltage, frequency, utilization can be enabled/disabled at runtime.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: implement opal_put_chars_atomic

The RAW console does not need writes to be atomic, so relax
opal_put_chars to be able to do partial writes, and implement an
_atomic variant which does not take a spinlock. This API is used
in xmon, so the less locking that is used, the better chance there
is that a crash can be debugged.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Implement and use opal_flush_console

A new console flushing firmware API was introduced to replace event
polling loops, and implemented in opal-kmsg with affddff69c55e
("powerpc/powernv: Add a kmsg_dumper that flushes console output on
panic"), to flush the console in the panic path.

The OPAL console driver has other situations where interrupts are off
and it needs to flush the console synchronously. These still use a
polling loop.

So move the opal-kmsg flush code to opal_flush_console, and use the
new function in opal-kmsg and opal_put_chars.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: use time64_t in read_persistent_clock

Looking through the remaining users of the deprecated mktime()
function, I found the powerpc rtc handlers, which use it in
place of rtc_tm_to_time64().

To clean this up, I'm changing over the read_persistent_clock()
function to the read_persistent_clock64() variant, and change
all the platform specific handlers along with it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: call OPAL_QUIESCE before OPAL_SIGNAL_SYSTEM_RESET

Although it is often possible to recover a CPU that was interrupted
from OPAL with a system reset NMI, it's undesirable to interrupt them
for a few reasons. Firstly because dump/debug code itself needs to
call firmware, so it could hang on a lock or possibly corrupt a
per-cpu data structure if it or another CPU was interrupted from
OPAL. Secondly, the kexec crash dump code will not return from
interrupt to unwind the OPAL call.

Call OPAL_QUIESCE with QUIESCE_HOLD before sending an NMI IPI to
another CPU, which wait for it to leave firmware (or time out) to
avoid this problem in normal conditions. Firmware bugs may still
result in a timeout and interrupting OPAL, but that is the best
option (stops the CPU, and possibly allows firmware to be debugged).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powernv: opal-sensor: Add support to read 64bit sensor values

This patch adds support to read 64-bit sensor values. This method is
used to read energy sensors and counters which are of type u64.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops

This is the start of an effort to tidy up and standardise all the
delays. Existing loops have a range of delay/sleep periods from 1ms
to 20ms, and some have no delay. They all loop forever except rtc,
which times out after 10 retries, and that uses 10ms delays. So use
10ms as our standard delay. The OPAL maintainer agrees 10ms is a
reasonable starting point.

The idea is to use the same recipe everywhere, once this is proven to
work then it will be documented as an OPAL API standard. Then both
firmware and OS can agree, and if a particular call needs something
else, then that can be documented with reasoning.

This is not the end-all of this effort, it's just a relatively easy
change that fixes some existing high latency delays. There should be
provision for standardising timeouts and/or interruptible loops where
possible, so non-fatal firmware errors don't cause hangs.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Always stop secondaries before reboot/shutdown

Currently powernv reboot and shutdown requests just leave secondaries
to do their own things. This is undesirable because they can trigger
any number of watchdogs while waiting for reboot, but also we don't
know what else they might be doing -- they might be causing trouble,
trampling memory, etc.

The opal scheduled flash update code already ran into watchdog problems
due to flashing taking a long time, and it was fixed with 2196c6f1ed
("powerpc/powernv: Return secondary CPUs to firmware before FW update"),
which returns secondaries to opal. It's been found that regular reboots
can take over 10 seconds, which can result in the hard lockup watchdog
firing,

reboot: Restarting system
[ 360.038896709,5] OPAL: Reboot request...
Watchdog CPU:0 Hard LOCKUP
Watchdog CPU:44 detected Hard LOCKUP other CPUS:16
Watchdog CPU:16 Hard LOCKUP
watchdog: BUG: soft lockup - CPU#16 stuck for 3s! [swapper/16:0]

This patch removes the special case for flash update, and calls
smp_send_stop in all cases before calling reboot/shutdown.

smp_send_stop could return CPUs to OPAL, the main reason not to is
that the request could come from a NMI that interrupts OPAL code,
so re-entry to OPAL can cause a number of problems. Putting
secondaries into simple spin loops improves the chances of a
successful reboot.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Enable tunneled operations

P9 supports PCI tunneled operations (atomics and as_notify). This
patch adds support for tunneled operations on powernv, with a new
API, to be called by device drivers:

pnv_pci_enable_tunnel()
Enable tunnel operations, tell driver the 16-bit ASN indication
used by kernel.

pnv_pci_disable_tunnel()
Disable tunnel operations.

pnv_pci_set_tunnel_bar()
Tell kernel the Tunnel BAR Response address used by driver.
This function uses two new OPAL calls, as the PBCQ Tunnel BAR
register is configured by skiboot.

pnv_pci_get_as_notify_info()
Return the ASN info of the thread to be woken up.

Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add opal calls for opencapi

Add opal calls to interact with the NPU:

OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA)
The SPA is a table containing one entry (Process Element) per memory
context which can be accessed by the opencapi device.

OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache
The NPU keeps a cache of recently accessed memory contexts. When a
Process Element is removed from the SPA, the cache for the link must
be cleared.

OPAL_NPU_TL_SET: configure the Transaction Layer
The Transaction Layer specification defines several templates for
messages to be exchanged on the link. During link setup, the host and
device must negotiate what templates are supported on both sides and
at what rates those messages can be sent.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Add opal_async_wait_response_interruptible() to opal-async

This patch adds an _interruptible version of opal_async_wait_response().
This is useful when a long running OPAL call is performed on behalf of
a userspace thread, for example, the opal_flash_{read,write,erase}
functions performed by the powernv-flash MTD driver.

It is foreseeable that these functions would take upwards of two
minutes causing the wait_event() to block long enough to cause hung
task warnings. Furthermore, wait_event_interruptible() is preferable
as otherwise there is no way for signals to stop the process which is
going to be confusing in userspace.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Make __opal_async_{get, release}_token() static

There are no callers of both __opal_async_get_token() and
__opal_async_release_token().

This patch also removes the possibility of "emergency through
synchronous call to __opal_async_get_token()" as such it makes more
sense to initialise opal_sync_sem for the maximum number of async
tokens.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET

This allows MSR[EE]=0 lockups to be detected on an OPAL (bare metal)
system similarly to the hcall NMI IPI on pseries guests, when the
platform/firmware supports it.

This is an example of CPU10 spinning with interrupts hard disabled:

Watchdog CPU:32 detected Hard LOCKUP other CPUS:10
Watchdog CPU:10 Hard LOCKUP
CPU: 10 PID: 4410 Comm: bash Not tainted 4.13.0-rc7-00074-ge89ce1f89f62-dirty #34
task: c0000003a82b4400 task.stack: c0000003af55c000
NIP: c0000000000a7b38 LR: c000000000659044 CTR: c0000000000a7b00
REGS: c00000000fd23d80 TRAP: 0100 Not tainted (4.13.0-rc7-00074-ge89ce1f89f62-dirty)
MSR: 90000000000c1033 <SF,HV,ME,IR,DR,RI,LE>
CR: 28422222 XER: 20000000
CFAR: c0000000000a7b38 SOFTE: 0
GPR00: c000000000659044 c0000003af55fbb0 c000000001072a00 0000000000000078
GPR04: c0000003c81b5c80 c0000003c81cc7e8 9000000000009033 0000000000000000
GPR08: 0000000000000000 c0000000000a7b00 0000000000000001 9000000000001003
GPR12: c0000000000a7b00 c00000000fd83200 0000000010180df8 0000000010189e60
GPR16: 0000000010189ed8 0000000010151270 000000001018bd88 000000001018de78
GPR20: 00000000370a0668 0000000000000001 00000000101645e0 0000000010163c10
GPR24: 00007fffd14d6294 00007fffd14d6290 c000000000fba6f0 0000000000000004
GPR28: c000000000f351d8 0000000000000078 c000000000f4095c 0000000000000000
NIP [c0000000000a7b38] sysrq_handle_xmon+0x38/0x40
LR [c000000000659044] __handle_sysrq+0xe4/0x270
Call Trace:
[c0000003af55fbd0] [c000000000659044] __handle_sysrq+0xe4/0x270
[c0000003af55fc70] [c000000000659810] write_sysrq_trigger+0x70/0xa0
[c0000003af55fca0] [c0000000003da650] proc_reg_write+0xb0/0x110
[c0000003af55fcf0] [c0000000003423bc] __vfs_write+0x6c/0x1b0
[c0000003af55fd90] [c000000000344398] vfs_write+0xd8/0x240
[c0000003af55fde0] [c00000000034632c] SyS_write+0x6c/0x110
[c0000003af55fe30] [c00000000000b220] system_call+0x58/0x6c

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use kernel types for opal_signal_system_reset()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Flush console before platform error reboot

Unrecovered MCE and HMI errors are sent through a special restart OPAL
call to log the platform error. The downside is that they don't go
through normal Linux crash paths, so they don't give much information
to the Linux console.

Change this by providing a special crash function which does some of
the console flushing from the panic() path before calling firmware to
reboot.

The downside of this is a little more code to execute before reaching
the firmware reboot. However in practice, it's critical to get the
Linux console messages output in order to debug a problem. So this is
a desirable tradeoff.

Note on the implementation: It is difficult to plumb a custom reboot
handler into the panic path, because panic does a little bit too much
work. For example, it will try to delay with the timebase, but that
may be corrupted in some cases resulting in a hang without reaching
the platform reboot. Another problem is that panic can invoke the
crash dump code which is not what we want in the case of a hardware
platform error. Long-term the best solution will be to rework the
panic path so it can be suitable for this kind of panic, but for now
we just duplicate a bit of the code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add support to clear sensor groups data

Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add support to set power-shifting-ratio

This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add support for powercap framework

Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Enable PCI peer-to-peer

P9 has support for PCI peer-to-peer, enabling a device to write in the
MMIO space of another device directly, without interrupting the CPU.

This patch adds support for it on powernv, by adding a new API to be
called by drivers. The pnv_pci_set_p2p(...) call configures an
'initiator', i.e the device which will issue the MMIO operation, and a
'target', i.e. the device on the receiving side.

P9 really only supports MMIO stores for the time being but that's
expected to change in the future, so the API allows to define both
load and store operations.

/* PCI p2p descriptor */
#define OPAL_PCI_P2P_ENABLE 0x1
#define OPAL_PCI_P2P_LOAD 0x2
#define OPAL_PCI_P2P_STORE 0x4

int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
u64 desc)

It uses a new OPAL call, as the configuration magic is done on the
PHBs by skiboot.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add IMC OPAL APIs

In-Memory Collection (IMC) counters are performance monitoring
infrastructure. These counters need special sequence of SCOMs to
init/start/stop which is handled by OPAL. And OPAL provides three APIs
to init and control these IMC engines.

OPAL API documentation:
https://github.com/open-power/skiboot/blob/master/doc/opal-api/opal-imc-counters.rst

Patch updates the kernel side powernv platform code to support the new
OPAL APIs

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add XIVE related definitions to opal-api.h

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Introduce address translation services for Nvlink2

Nvlink2 supports address translation services (ATS) allowing devices
to request address translations from an mmu known as the nest MMU
which is setup to walk the CPU page tables.

To access this functionality certain firmware calls are required to
setup and manage hardware context tables in the nvlink processing unit
(NPU). The NPU also manages forwarding of TLB invalidates (known as
address translation shootdowns/ATSDs) to attached devices.

This patch exports several methods to allow device drivers to register
a process id (PASID/PID) in the hardware tables and to receive
notification of when a device should stop issuing address translation
requests (ATRs). It also adds a fault handler to allow device drivers
to demand fault pages in.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fix up comment formatting, use flush_tlb_mm()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Remove separate entry for OPAL real mode calls

All entry points already read the MSR so they can easily do
the right thing.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Initialise nest mmu

POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.

This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Define real-mode versions of OPAL XICS accessors

This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.

It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

KVM: PPC: Book3S HV: Set server for passed-through interrupts

When a guest has a PCI pass-through device with an interrupt, it
will direct the interrupt to a particular guest VCPU. In fact the
physical interrupt might arrive on any CPU, and then get
delivered to the target VCPU in the emulated XICS (guest interrupt
controller), and eventually delivered to the target VCPU.

Now that we have code to handle device interrupts in real mode
without exiting to the host kernel, there is an advantage to having
the device interrupt arrive on the same sub(core) as the target
VCPU is running on. In this situation, the interrupt can be
delivered to the target VCPU without any exit to the host kernel
(using a hypervisor doorbell interrupt between threads if
necessary).

This patch aims to get passed-through device interrupts arriving
on the correct core by setting the interrupt server in the real
hardware XICS for the interrupt to the first thread in the (sub)core
where its target VCPU is running. We do this in the real-mode H_EOI
code because the H_EOI handler already needs to look at the
emulated ICS state for the interrupt (whereas the H_XIRR handler
doesn't), and we know we are running in the target VCPU context
at that point.

We set the server CPU in hardware using an OPAL call, regardless of
what the IRQ affinity mask for the interrupt says, and without
updating the affinity mask. This amounts to saying that when an
interrupt is passed through to a guest, as a matter of policy we
allow the guest's affinity for the interrupt to override the host's.

This is inspired by an earlier patch from Suresh Warrier, although
none of this code came from that earlier patch.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

powerpc: Put exception configuration in a common place

The various calls to establish exception endianness and AIL are
now done from a single point using already established CPU and FW
feature bits to decide what to do.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Add real mode call wrappers

Replace the old generic opal_call_realmode() with proper per-call
wrappers similar to the normal ones and convert callers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add XICS emulation APIs

OPAL provides an emulated XICS interrupt controller to
use as a fallback on newer processors that don't have a
XICS. It's meant as a way to provide backward compatibility
with future processors. Add the corresponding interfaces.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Wake up kopald polling thread before waiting for events

On some environments (prototype machines, some simulators, etc...)
there is no functional interrupt source to signal completion, so
we rely on the fairly slow OPAL heartbeat.

In a number of cases, the calls complete very quickly or even
immediately. We've observed that it helps a lot to wakeup the OPAL
heartbeat thread before waiting for event in those cases, it will
call OPAL immediately to collect completions for anything that
finished fast enough.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add driver for operator panel on FSP machines

Implement new character device driver to allow access from user space
to the operator panel display present on IBM Power Systems machines
with FSPs.

This will allow status information to be presented on the display which
is visible to a user.

The driver implements a character buffer which a user can read/write
by accessing the device (/dev/op_panel). This buffer is then displayed on
the operator panel display. Any attempt to write past the last character
position will have no effect and attempts to write more characters than
the size of the display will be truncated. The device may only be accessed
by a single process at a time.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Add inline function to get rc from an ASYNC_COMP opal_msg

An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the
params[1] struct member. However this isn't intuitive or obvious when
reading the code and requires that a user look at the skiboot
documentation or opal-api.h to verify this.

Add an inline function to get the return code from an opal_msg and update
call sites accordingly.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Functions to get/set PCI slot state

This exports 4 functions, which base on the corresponding OPAL
APIs to get/set PCI slot status. Those functions are going to
be used by PowerNV PCI hotplug driver:

pnv_pci_get_device_tree() opal_get_device_tree()
pnv_pci_get_presence_state() opal_pci_get_presence_state()
pnv_pci_get_power_state() opal_pci_get_power_state()
pnv_pci_set_power_state() opal_pci_set_power_state()

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Support PCI slot ID

The reset and poll functionality from (OPAL) firmware supports
PHB and PCI slot at same time. They are identified by ID. This
supports PCI slot ID by:

* Rename the argument name for opal_pci_reset() and opal_pci_poll()
accordingly
* Rename pnv_eeh_phb_poll() to pnv_eeh_poll() and adjust its argument
name.
* One macro is added to produce PCI slot ID.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: new function to access OPAL msglog

Currently, the OPAL msglog/console buffer is exposed as a sysfs file, with
the sysfs read handler responsible for retrieving the log from the OPAL
buffer. We'd like to be able to use it in xmon as well.

Refactor the OPAL msglog code to create a new function, opal_msglog_copy(),
that copies to an arbitrary buffer. Separate the initialisation code into
generic memcons init and sysfs file creation.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages

The recently added OPAL API call, OPAL_CONSOLE_FLUSH, originally took no
parameters and returned nothing. The call was updated to accept the
terminal number to flush, and returned various values depending on the
state of the output buffer.

The prototype has been updated and its usage in the OPAL kmsg dumper has
been modified to support its new behaviour as an incremental flush.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add a kmsg_dumper that flushes console output on panic

On BMC machines, console output is controlled by the OPAL firmware and is
only flushed when its pollers are called. When the kernel is in a panic
state, it no longer calls these pollers and thus console output does not
completely flush, causing some output from the panic to be lost.

Output is only actually lost when the kernel is configured to not power off
or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL
flushes the console buffer as part of its power down routines. Before this
patch, however, only partial output would be printed during the timeout wait.

This patch adds a new kmsg_dumper which gets called at panic time to ensure
panic output is not lost. It accomplishes this by calling OPAL_CONSOLE_FLUSH
in the OPAL API, and if that is not available, the pollers are called enough
times to (hopefully) completely flush the buffer.

The flushing mechanism will only affect output printed at and before the
kmsg_dump call in kernel/panic.c:panic(). As such, the "end Kernel panic"
message may still be truncated as follows:

>Call Trace:
>[c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable)
>[c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4
>[c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c
>[c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254
>[c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350
>[c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130
>[c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac
>---[ end Kernel panic - not

This functionality is implemented as a kmsg_dumper as it seems to be the
most sensible way to introduce platform-specific functionality to the
panic function.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states

This patch registers the following two new OPAL interfaces calls
for the platform LED subsystem. With the help of these new OPAL calls,
the kernel will be able to get or set the state of various individual
LEDs on the system at any given location code which is passed through
the LED specific device tree nodes.

(1) OPAL_LEDS_GET_INDICATOR opal_leds_get_ind
(2) OPAL_LEDS_SET_INDICATOR opal_leds_set_ind

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Invoke opal_cec_reboot2() on unrecoverable machine check errors.

On non-recoverable MCE errors in kernel space, Linux kernel panics
and system reboots. On BMC based system opal-prd runs as a daemon
in the host. Hence, kernel crash may prevent opal-prd to detect and
analyze this MCE error. This may land us in a situation where the faulty
memory never gets de-configured and Linux would keep hitting same MCE error
again and again. If this happens in early stage of kernel initialization,
then Linux will keep crashing and rebooting in a loop.

This patch fixes this issue by invoking new opal_cec_reboot2() call with
reboot type OPAL_REBOOT_PLATFORM_ERROR to inform BMC/OCC about this
error, so that BMC can collect relevant data for error analysis and
decide what component to de-configure before rebooting.

This patch is dependent on OPAL patchset posted on skiboot mailing list
at https://lists.ozlabs.org/pipermail/skiboot/2015-July/001771.html that
introduces opal_cec_reboot2() opal call.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add poweroff (EPOW, DPO) events support for PowerNV platform

This patch adds support for OPAL EPOW (Environmental and Power Warnings)
and DPO (Delayed Power Off) events for the PowerNV platform. These events
are generated on FSP (Flexible Service Processor) based systems. EPOW
events are generated due to various critical system conditions that
require system shutdown. A few examples of these conditions are high
ambient temperature or system running on UPS power with low UPS battery.
DPO event is generated in response to admin initiated system shutdown
request. Upon receipt of EPOW and DPO events the host kernel invokes
orderly_poweroff() for performing graceful system shutdown.

Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Acked-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add opal-prd channel

This change adds a char device to access the "PRD" (processor runtime
diagnostics) channel to OPAL firmware.

Includes contributions from Vaidyanathan Srinivasan, Neelesh Gupta &
Vishal Kulkarni.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add a virtual irqchip for opal events

Whenever an interrupt is received for opal the linux kernel gets a
bitfield indicating certain events that have occurred and need handling
by the various device drivers. Currently this is handled using a
notifier interface where we call every device driver that has
registered to receive opal events.

This approach has several drawbacks. For example each driver has to do
its own checking to see if the event is relevant as well as event
masking. There is also no easy method of recording the number of times
we receive particular events.

This patch solves these issues by exposing opal events via the
standard interrupt APIs by adding a new interrupt chip and
domain. Drivers can then register for the appropriate events using
standard kernel calls such as irq_of_parse_and_map().

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Reorder OPAL subsystem initialisation

Most of the OPAL subsystems are always compiled in for PowerNV and
many of them need to be initialised before or after other OPAL
subsystems. Rather than trying to control this ordering through
machine initcalls it is clearer and easier to control initialisation
order with explicit calls in opal_init.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Cc: Mahesh Jagannath Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior

Fastsleep is one of the idle state which cpuidle subsystem currently
uses on power8 machines. In this state L2 cache is brought down to a
threshold voltage. Therefore when the core is in fastsleep, the
communication between L2 and L3 needs to be fenced. But there is a bug
in the current power8 chips surrounding this fencing.

OPAL provides a workaround which precludes the possibility of hitting
this bug. But running with this workaround applied causes checkstop
if any correctable error in L2 cache directory is detected. Hence OPAL
also provides a way to undo the workaround.

In the existing implementation, workaround is applied by the last thread
of the core entering fastsleep and undone by the first thread waking up.
But this has a performance cost. These OPAL calls account for roughly
4000 cycles everytime the core has to enter or wakeup from fastsleep.

This patch introduces a sysfs attribute (fastsleep_workaround_applyonce)
to choose the behavior of this workaround.

By default, fastsleep_workaround_applyonce = 0. In this case, workaround
is applied/undone everytime the core enters/exits fastsleep.

fastsleep_workaround_applyonce = 1. In this case the workaround is
applied once on all the cores and never undone. This can be triggered by
echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce

For simplicity this attribute can be modified only once. Implying, once
fastsleep_workaround_applyonce is changed to 1, it cannot be reverted
to the default state.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add interfaces for flash device access

This change adds the OPAL interface definitions to allow Linux to read,
write and erase from system flash devices. We register platform devices
for the flash devices exported by firmware.

We clash with the existing opal_flash_init function, which is really for
the FSP flash update functionality, so we rename that initcall to
opal_flash_update_init().

A future change will add an mtd driver that uses this interface.

Changes from Joel Stanley and Jeremy Kerr.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: convert codes returned by OPAL calls

OPAL has its own list of return codes. The patch provides a translation
of such codes in errnos for the opal_sensor_read call, and possibly
others if needed.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add OPAL message notifier unregister function

Provide an unregister interface for the opal message notifiers
to be called when not needed like during driver unload/remove.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Move opal-api.h closer to the Skiboot version

This commit gets opal-api.h to mostly match the version in Skiboot as of
commit ea7d806ab0ba.

The exceptions are things which are not (currently) used in Linux.

Most of this is just whitespace and a few things moving around. I think
the diff is readable.

Also OpalMessageType became opal_msg_type, requiring a change in the
Linux code.

Finally Skiboot and Linux disagree on CAPI vs CXL, because CAPI means
something else in Linux. To handle that we just point the Linux wrapper,
which is named "cxl" to the OPAL token OPAL_PCI_SET_PHB_CAPI_MODE.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>

powerpc/powernv: Move OPAL API definitions to opal-api.h

We'd like to get to the stage where the OPAL API is defined in a header
that is identical between Linux and Skiboot.

As step one, split the bits that actually define the API into
opal-api.h. The Linux specific parts stay in opal.h.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>

powerpc/powernv: Add OPAL soft-poweroff routine

Register a notifier for a OPAL message indicating that the machine
should prepare itself for a graceful power off.

OPAL will tell us if the power off is a reboot or shutdown, but for now
we perform the same orderly_poweroff action.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

cxl: Enable CAPP recovery

Turning snoops on is the last step in CAPP recovery. Sapphire is expected to
have reinitialized the PHB and done the previous recovery steps.

Add mode argument to opal call to do this. Driver can turn snoops off although
it does not currently.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powernv/powerpc: Add winkle support for offline cpus

Winkle is a deep idle state supported in power8 chips. A core enters
winkle when all the threads of the core enter winkle. In this state
power supply to the entire chiplet i.e core, private L2 and private L3
is turned off. As a result it gives higher powersavings compared to
sleep.

But entering winkle results in a total hypervisor state loss. Hence the
hypervisor context has to be preserved before entering winkle and
restored upon wake up.

Power-on Reset Engine (PORE) is a dedicated engine which is responsible
for powering on the chiplet during wake up. It can be programmed to
restore the register contests of a few specific registers. This patch
uses PORE to restore register state wherever possible and uses stack to
save and restore rest of the necessary registers.

With hypervisor state restore things fall under three categories-
per-core state, per-subcore state and per-thread state. To manage this,
extend the infrastructure introduced for sleep. Mainly we add a paca
variable subcore_sibling_mask. Using this and the core_idle_state we can
distingush first thread in core and subcore.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powernv/cpuidle: Redesign idle states management

Deep idle states like sleep and winkle are per core idle states. A core
enters these states only when all the threads enter either the
particular idle state or a deeper one. There are tasks like fastsleep
hardware bug workaround and hypervisor core state save which have to be
done only by the last thread of the core entering deep idle state and
similarly tasks like timebase resync, hypervisor core register restore
that have to be done only by the first thread waking up from these
state.

The current idle state management does not have a way to distinguish the
first/last thread of the core waking/entering idle states. Tasks like
timebase resync are done for all the threads. This is not only is
suboptimal, but can cause functionality issues when subcores and kvm is
involved.

This patch adds the necessary infrastructure to track idle states of
threads in a per-core structure. It uses this info to perform tasks like
fastsleep workaround and timebase resync only once per core.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Originally-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Enable Offline CPUs to enter deep idle states

The secondary threads should enter deep idle states so as to gain maximum
powersavings when the entire core is offline. To do so the offline path
must be made aware of the available deepest idle state. Hence probe the
device tree for the possible idle states in powernv core code and
expose the deepest idle state through flags.

Since the device tree is probed by the cpuidle driver as well, move
the parameters required to discover the idle states into an appropriate
common place to both the driver and the powernv core code.

Another point is that fastsleep idle state may require workarounds in
the kernel to function properly. This workaround is introduced in the
subsequent patches. However neither the cpuidle driver or the hotplug
path need be bothered about this workaround.

They will be taken care of by the core powernv code.

Originally-by: Srivatsa S. Bhat <srivatsa@mit.edu>
Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

i2c: Driver to expose PowerNV platform i2c busses

The patch exposes the available i2c busses on the PowerNV platform
to the kernel and implements the bus driver to support i2c and
smbus commands.
The driver uses the platform device infrastructure to probe the busses
on the platform and registers them with the i2c driver framework.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> (I2C part, excluding the bindings)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Cleanup unused MCE definitions/declarations.

Cleanup OpalMCE_* definitions/declarations and other related code which
is not used anymore.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Benjamin Herrrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

rtc/tpo: Driver to support rtc and wakeup on PowerNV platform

The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.

The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.

Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#

FSP:
$ smgr mfgState
standby
$ rtim timeofday

System time is valid: 2014/10/14 08:12:04.225115

$ smgr mfgState
ipling
$

CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add OPAL IPMI interface

Recent OPAL firmare adds a couple of functions to send and receive IPMI
messages:

https://github.com/open-power/skiboot/commit/b2a374da

This change updates the token list and wrappers to suit, and adds the
platform devices for any IPMI interfaces.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/opal: Add PHB to cxl mode call

This adds the OPAL call to change a PHB into cxl mode.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Sync OpalPciResetScope with firmware

The names of PCI reset scopes aren't sychronized with firmware.
The patch fixes it.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Sync header with firmware

The patch synchronizes firmware header file (opal.h) for PCI error
injection.

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Add OPAL check token call

Currently there is no way to generically check if an OPAL call exists or not
from the host kernel.

This adds an OPAL call opal_check_token() which tells you if the given token is
present in OPAL or not.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Interface to register/unregister opal dump region

PowerNV platform is capable of capturing host memory region when system
crashes (because of host/firmware). We have new OPAL API to register/
unregister memory region to be captured when system crashes.

This patch adds support for new API. Also during boot time we register
kernel log buffer and unregister before doing kexec.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Invoke opal call to handle hmi.

When we hit the HMI in Linux, invoke opal call to handle/recover from HMI
errors in real mode and then in virtual mode during check_irq_replay()
invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from
OPAL and act accordingly.

Now that we are ready to handle HMI interrupt directly in linux, remove
the HMI interrupt registration with firmware.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/book3s: Add basic infrastructure to handle HMI in Linux.

Handle Hypervisor Maintenance Interrupt (HMI) in Linux. This patch implements
basic infrastructure to handle HMI in Linux host. The design is to invoke
opal handle hmi in real mode for recovery and set irq_pending when we hit HMI.
During check_irq_replay pull opal hmi event and print hmi info on console.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Allow to freeze PE

The patch synchronizes header file with firmware to have new OPAL
API opal_pci_eeh_freeze_set(), which is used to freeze the specified
PE in order to support "compound" PE.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Enable M64 aperatus for PHB3

This patch enables M64 aperatus for PHB3.

We already had platform hook (ppc_md.pcibios_window_alignment) to affect
the PCI resource assignment done in PCI core so that each PE's M32 resource
was built on basis of M32 segment size. Similarly, we're using that for
M64 assignment on basis of M64 segment size.

* We're using last M64 BAR to cover M64 aperatus, and it's shared by all
256 PEs.
* We don't support P7IOC yet. However, some function callbacks are added
to (struct pnv_phb) so that we can reuse them on P7IOC in future.
* PE, corresponding to PCI bus with large M64 BAR device attached, might
span multiple M64 segments. We introduce "compound" PE to cover the case.
The compound PE is a list of PEs and the master PE is used as before.
The slave PEs are just for MMIO isolation.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Make diag-data not endian dependent

It's followup of commit ddf0322a ("powerpc/powernv: Fix endianness
problems in EEH"). The patch helps to get non-endian-dependent
diag-data.

Cc: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Remove OPAL v1 takeover

In commit 27f4488872d9 "Add OPAL takeover from PowerVM" we added support
for "takeover" on OPAL v1 machines.

This was a mode of operation where we would boot under pHyp, and query
for the presence of OPAL. If detected we would then do a special
sequence to take over the machine, and the kernel would end up running
in hypervisor mode.

OPAL v1 was never a supported product, and was never shipped outside
IBM. As far as we know no one is still using it.

Newer versions of OPAL do not use the takeover mechanism. Although the
query for OPAL should be harmless on machines with newer OPAL, we have
seen a machine where it causes a crash in Open Firmware.

The code in early_init_devtree() to copy boot_command_line into cmd_line
was added in commit 817c21ad9a1f "Get kernel command line accross OPAL
takeover", and AFAIK is only used by takeover, so should also be
removed.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endianness problems in EEH

EEH information fetched from OPAL need fix before using in LE environment.
To be included in sparse's endian check, declare them as __beXX and
access them by accessors.

Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endian issues in memory error handling code

struct OpalMemoryErrorData is passed to us from firmware, so we
have to byteswap it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add calls to support little endian host

When running as a powernv "host" system on P8, we need to switch
the endianness of interrupt handlers. This does it via the appropriate
call to the OPAL firmware which may result in just switching HID0:HILE
but depending on the processor version might need to do a few more
things. This call must be done early before any other processor has
been brought out of firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Return secondary CPUs to firmware before FW update

Firmware update on PowerNV platform takes several minutes. During
this time one CPU is stuck in FW and the kernel complains about "soft
lockups".

This patch returns all secondary CPUs to firmware before starting
firmware update process.

[ Reworked a bit and cleaned up -- BenH ]

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix little endian issues in OPAL dump code

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Create OPAL sglist helper functions and fix endian issues

We have two copies of code that creates an OPAL sg list. Consolidate
these into a common set of helpers and fix the endian issues.

The flash interface embedded a version number in the num_entries
field, whereas the dump interface did did not. Since versioning
wasn't added to the flash interface and it is impossible to add
this in a backwards compatible way, just remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix little endian issues in OPAL error log code

Fix little endian issues with the OPAL error log code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Remove some OPAL function declaration duplication

We had some duplication of the internal OPAL functions.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Use uint64_t instead of size_t in OPAL APIs

Using size_t in our APIs is asking for trouble, especially
when some OPAL calls use size_t pointers.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/opal: Add missing include

next-20140324 currently fails compiling celleb_defconfig with:

arch/powerpc/include/asm/opal.h:894:42: error: 'struct notifier_block' declared inside parameter list [-Werror]
arch/powerpc/include/asm/opal.h:894:42: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
arch/powerpc/include/asm/opal.h:896:14: error: 'struct notifier_block' declared inside parameter list [-Werror]

This is due to a missing include which is added here.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add invalid OPAL call

This call will not be understood by OPAL, and cause it to add an error
to it's log. Among other things, this is useful for testing the
behaviour of the log as it fills up.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add OPAL message log interface

OPAL provides an in-memory circular buffer containing a message log
populated with various runtime messages produced by the firmware.

Provide a sysfs interface /sys/firmware/opal/msglog for userspace to
view the messages.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endian issues with sensor code

One OPAL call and one device tree property needed byte swapping.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endian issues with OPAL async code

OPAL defines opal_msg as a big endian struct so we have to
byte swap it on little endian builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add opal_notifier_unregister() and export to modules

opal_notifier_register() is missing a pending "unregister" variant
and should be exposed to modules.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Enable fetching of platform sensor data

This patch enables fetching of various platform sensor data through
OPAL and expects a sensor handle from the driver to pass to OPAL.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Enable reading and updating of system parameters

This patch enables reading and updating of system parameters through
OPAL call.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Infrastructure to support OPAL async completion

This patch adds support for notifying the clients of their request
completion. Clients request for the token before making OPAL call
and then wait for the response.

This patch uses messaging infrastructure to pull the data to linux
by registering itself for the message type OPAL_MSG_ASYNC_COMP.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv Platform dump interface

This enables support for userspace to fetch and initiate FSP and
Platform dumps from the service processor (via firmware) through sysfs.

Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com>

Flow:
- We register for OPAL notification events.
- OPAL sends new dump available notification.
- We make information on dump available via sysfs
- Userspace requests dump contents
- We retrieve the dump via OPAL interface
- User copies the dump data
- userspace sends ack for dump
- We send ACK to OPAL.

sysfs files:
- We add the /sys/firmware/opal/dump directory
- echoing 1 (well, anything, but in future we may support
different dump types) to /sys/firmware/opal/dump/initiate_dump
will initiate a dump.
- Each dump that we've been notified of gets a directory
in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex,
as this is what's used elsewhere to identify the dump).
- Each dump has files: id, type, dump and acknowledge
dump is binary and is the dump itself.
echoing 'ack' to acknowledge (currently any string will do) will
acknowledge the dump and it will soon after disappear from sysfs.

OPAL APIs:
- opal_dump_init()
- opal_dump_info()
- opal_dump_read()
- opal_dump_ack()
- opal_dump_resend_notification()

Currently we are only ever notified for one dump at a time (until
the user explicitly acks the current dump, then we get a notification
of the next dump), but this kernel code should "just work" when OPAL
starts notifying us of all the dumps present.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Read OPAL error log and export it through sysfs

Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

This patch adds support to read error logs from OPAL and export
them to userspace through a sysfs interface.

We export each log entry as a directory in /sys/firmware/opal/elog/

Currently, OPAL will buffer up to 128 error log records, we don't
need to have any knowledge of this limit on the Linux side as that
is actually largely transparent to us.

Each error log entry has the following files: id, type, acknowledge, raw.
Currently we just export the raw binary error log in the 'raw' attribute.
In a future patch, we may parse more of the error log to make it a bit
easier for userspace (e.g. to be able to display a brief summary in
petitboot without having to have a full parser).

If we have >128 logs from OPAL, we'll only be notified of 128 until
userspace starts acknowledging them. This limitation may be lifted in
the future and with this patch, that should "just work" from the linux side.

A userspace daemon should:
- wait for error log entries using normal mechanisms (we announce creation)
- read error log entry
- save error log entry safely to disk
- acknowledge the error log entry
- rinse, repeat.

On the Linux side, we read the error log when we're notified of it. This
possibly isn't ideal as it would be better to only read them on-demand.
However, this doesn't really work with current OPAL interface, so we
read the error log immediately when notified at the moment.

I've tested this pretty extensively and am rather confident that the
linux side of things works rather well. There is currently an issue with
the service processor side of things for >128 error logs though.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO.

Detect and recover from machine check when inside opal on a special
scom load instructions. On specific SCOM read via MMIO we may get a machine
check exception with SRR0 pointing inside opal. To recover from MC
in this scenario, get a recovery instruction address and return to it from
MC.

OPAL will export the machine check recoverable ranges through
device tree node mcheck-recoverable-ranges under ibm,opal:

# hexdump /proc/device-tree/ibm,opal/mcheck-recoverable-ranges
0000000 0000 0000 3000 2804 0000 000c 0000 0000
0000010 3000 2814 0000 0000 3000 27f0 0000 000c
0000020 0000 0000 3000 2814 xxxx xxxx xxxx xxxx
0000030 llll llll yyyy yyyy yyyy yyyy
...
...
#

where:
xxxx xxxx xxxx xxxx = Starting instruction address
llll llll = Length of the address range.
yyyy yyyy yyyy yyyy = recovery address

Each recoverable address range entry is (start address, len,
recovery address), 2 cells each for start and recovery address, 1 cell for
len, totalling 5 cells per entry. During kernel boot time, build up the
recovery table with the list of recovery ranges from device-tree node which
will be used during machine check exception to recover from MMIO SCOM UE.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add OPAL call to resync timebase on wakeup

During "Fast-sleep" and deeper power savings state, decrementer and
timebase could be stopped making it out of sync with rest
of the cores in the system.

Add a firmware call to request platform to resync timebase
using low level platform methods.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix opal_xscom_{read,write} prototype

The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]

powerpc/powernv: Call OPAL sync before kexec'ing

Its possible that OPAL may be writing to host memory during
kexec (like dump retrieve scenario). In this situation we might
end up corrupting host memory.

This patch makes OPAL sync call to make sure OPAL stops
writing to host memory before kexec'ing.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space

The patch implements the EEH operation backend restore_config()
for PowerNV platform. That relies on OPAL API opal_pci_reinit()
where we reinitialize the error reporting properly after PE or
PHB reset.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix OPAL LPC access in Little Endian

We are passing pointers to the firmware for reads, we need to properly
convert the result as OPAL is always BE.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endian issue in opal_xscom_read

opal_xscom_read uses a pointer to return the data so we need
to byteswap it on LE builds.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Get FSP memory errors and plumb into memory poison infrastructure.

Get the memory errors reported by opal and plumb it into memory poison
infrastructure. This patch uses new messaging channel infrastructure to
pull the fsp memory errors to linux.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Move SG list structure to header file

Move SG list and entry structure to header file so that
it can be used in other places as well.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Infrastructure to read opal messages in generic format.

Opal now has a new messaging infrastructure to push the messages to
linux in a generic format for different type of messages using only one
event bit. The format of the opal message is as below:

struct opal_msg {
uint32_t msg_type;
uint32_t reserved;
uint64_t params[8];
};

This patch allows clients to subscribe for notification for specific
message type. It is upto the subscriber to decipher the messages who showed
interested in receiving specific message type.

The interface to subscribe for notification is:

int opal_message_notifier_register(enum OpalMessageType msg_type,
struct notifier_block *nb)

The notifier will fetch the opal message when available and notify the
subscriber with message type and the opal message. It is subscribers
responsibility to copy the message data before returning from notifier
callback.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Code update interface

Code update interface for powernv platform. This provides
sysfs interface to pass new image, validate, update and
commit images.

This patch includes:
- Below OPAL APIs for code update
- opal_validate_flash()
- opal_manage_flash()
- opal_update_flash()

- Create below sysfs files under /sys/firmware/opal
- image : Interface to pass new FW image
- validate_flash : Validate candidate image
- manage_flash : Commit/Reject operations
- update_flash : Flash new candidate image

Updating Image:
"update_flash" is an interface to indicate flash new FW.
It just passes image SG list to FW. Actual flashing is done
during system reboot time.

Note:
- SG entry format:
I have kept version number to keep this list similar to what
PAPR is defined.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Create opal sysfs directory

Create /sys/firmware/opal directory. We wil use this
interface to fetch opal error logs, firmware update, etc.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Output PHB3 diag-data

The patch adds function ioda_eeh_phb3_phb_diag() to dump PHB3
PHB diag-data. That's called while detecting informative errors
or frozen PE on the specific PHB.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix some PCI sparse errors and one LE bug

pnv_pci_setup_bml_iommu was missing a byteswap of a device
tree property.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: More little endian issues in OPAL RTC driver

Sparse caught an issue where opal_set_rtc_time was incorrectly
byteswapping. Also fix a number of sparse warnings.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Fix endian issues in OPAL console and udbg backend

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Return secondary CPUs to firmware on kexec

With OPAL v3 we can return secondary CPUs to firmware on kexec. This
allows firmware to do various cleanups making things generally more
reliable, and will enable the "new" kernel to call OPAL to perform
some reconfiguration tasks early on that can only be done while
all the CPUs are in firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add PIO accessors for Power8 LPC bus

This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to
implement a set of hooks for IO port access to use the LPC
bus via OPAL calls for the first 64K of IO space

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Update opal.h to add new LPC and XSCOM functions

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powernv/opal: Notifier for OPAL events

This patch implements a notifier to receive a notification on OPAL
event mask changes. The notifier is only called as a result of an OPAL
interrupt, which will happen upon reception of FSP messages or PCI errors.
Any event mask change detected as a result of opal_poll_events() will not
result in a notifier call.

[benh: changelog]
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Sync OPAL API with firmware

The patch synchronizes OPAL APIs between kernel and firmware. Also,
we starts to replace opal_pci_get_phb_diag_data() with the similar
opal_pci_get_phb_diag_data2() and the former OPAL API would return
OPAL_UNSUPPORTED from now on.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Detect OPAL v3 API version

Future firmwares will support that new version

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Improve kexec reliability

We add a machine_shutdown hook that frees the OPAL interrupts
(so they get masked at the source and don't fire while kexec'ing)
and which triggers an IODA reset on all the PCIe host bridges
which will have the effect of blocking all DMAs and subsequent
PCIs interrupts.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Patch MSI EOI handler on P8

The EOI handler of MSI/MSI-X interrupts for P8 (PHB3) need additional
steps to handle the P/Q bits in IVE before EOIing the corresponding
interrupt. The patch changes the EOI handler to cover that. we have
individual IRQ chip in each PHB instance. During the MSI IRQ setup
time, the IRQ chip is copied over from the original one for that IRQ,
and the EOI handler is patched with the one that will handle the P/Q
bits (As Ben suggested).

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Update OPAL interfaces

This adds some more interfaces for OPAL v2

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Machine check and other system interrupts

OPAL can handle various interrupt for us such as Machine Checks (it
performs all sorts of recovery tasks and passes back control to us with
informations about the error), Hardware Management Interrupts and Softpatch
interrupts.

This wires up the mechanisms and prints out specific informations returned
by HAL when a machine check occurs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks

Implements OPAL RTC and NVRAM support and wire all that up to
the powernv platform.

We use RTAS for RTC as a fallback if available. Using RTAS for nvram
is not supported yet, pending some rework/cleanup and generalization
of the pSeries & CHRP code. We also use RTAS fallbacks for power off
and reboot

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Support for OPAL console

This adds a udbg and an hvc console backend for supporting a console
using the OPAL console interfaces.

On OPAL v1 we have hvc0 mapped to whatever console the system was
configured for (network or hvsi serial port) via the service
processor.

On OPAL v2 we have hvcN mapped to the Nth console provided by OPAL
which generally corresponds to:

hvc0 : network console (raw protocol)
hvc1 : serial port S1 (hvsi)
hvc2 : serial port S2 (hvsi)

Note: At this point, early debug console only works with OPAL v1
and shouldn't be enabled in a normal kernel.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Basic support for OPAL

Add definition of OPAL interfaces along with the wrappers to call
into OPAL runtime and the early device-tree parsing hook to locate
the OPAL runtime firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Add OPAL takeover from PowerVM

On machines supporting the OPAL firmware version 1, the system
is initially booted under pHyp. We then use a special hypercall
to verify if OPAL is available and if it is, we then trigger
a "takeover" which disables pHyp and loads the OPAL runtime
firmware, giving control to the kernel in hypervisor mode.

This patch add the necessary code to detect that the OPAL takeover
capability is present when running under PowerVM (aka pHyp) and
perform said takeover to get hypervisor control of the processor.

To perform the takeover, we must first use RTAS (within Open
Firmware runtime environment) to start all processors & threads,
in order to give control to OPAL on all of them. We then call
the takeover hypercall on everybody, OPAL will re-enter the kernel
main entry point passing it a flat device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>