arm64: kernel: Create initial ID map from C code

The asm code that creates the initial ID map is rather intricate and
hard to follow. This is problematic because it makes adding support for
things like LPA2 or WXN more difficult than necessary. Also, it is
parameterized like the rest of the MM code to run with a configurable
number of levels, which is rather pointless, given that all AArch64 CPUs
implement support for 48-bit virtual addressing, and that many systems
exist with DRAM located outside of the 39-bit addressable range, which
is the only smaller VA size that is widely used, and we need additional
tricks to make things work in that combination.

So let's bite the bullet, and rip out all the asm macros, and fiddly
code, and replace it with a C implementation based on the newly added
routines for creating the early kernel VA mappings. And while at it,
create the initial ID map based on 48-bit virtual addressing as well,
regardless of the number of configured levels for the kernel proper.

Note that this code may execute with the MMU and caches disabled, and is
therefore not permitted to make unaligned accesses. This shouldn't
generally happen in any case for the algorithm as implemented, but to be
sure, let's pass -mstrict-align to the compiler just in case.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-66-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: pgtable: Decouple PGDIR size macros from PGD/PUD/PMD levels

The mapping from PGD/PUD/PMD to levels and shifts is very confusing,
given that, due to folding, the shifts may be equal for different
levels, if the macros are even #define'd to begin with.

In a subsequent patch, we will modify the ID mapping code to decouple
the number of levels from the kernel's view of how these types are
folded, so prepare for this by reformulating the macros without the use
of these types.

Instead, use SWAPPER_BLOCK_SHIFT as the base quantity, and derive it
from either PAGE_SHIFT or PMD_SHIFT, which -if defined at all- are
defined unambiguously for a given page size, regardless of the number of
configured levels.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-65-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mm: Use 48-bit virtual addressing for the permanent ID map

Even though we support loading kernels anywhere in 48-bit addressable
physical memory, we create the ID maps based on the number of levels
that we happened to configure for the kernel VA and user VA spaces.

The reason for this is that the PGD/PUD/PMD based classification of
translation levels, along with the associated folding when the number of
levels is less than 5, does not permit creating a page table hierarchy
of a set number of levels. This means that, for instance, on 39-bit VA
kernels we need to configure an additional level above PGD level on the
fly, and 36-bit VA kernels still only support 47-bit virtual addressing
with this trick applied.

Now that we have a separate helper to populate page table hierarchies
that does not define the levels in terms of PUDS/PMDS/etc at all, let's
reuse it to create the permanent ID map with a fixed VA size of 48 bits.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-64-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: head: allocate more pages for the kernel mapping

In preparation for switching to an early kernel mapping routine that
maps each segment according to its precise boundaries, and with the
correct attributes, let's allocate some extra pages for page tables for
the 4k page size configuration. This is necessary because the start and
end of each segment may not be aligned to the block size, and so we'll
need an extra page table at each segment boundary.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-59-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mm: Take potential load offset into account when KASLR is off

We enable CONFIG_RELOCATABLE even when CONFIG_RANDOMIZE_BASE is
disabled, and this permits the loader (i.e., EFI) to place the kernel
anywhere in physical memory as long as the base address is 64k aligned.

This means that the 'KASLR' case described in the header that defines
the size of the statically allocated page tables could take effect even
when CONFIG_RANDMIZE_BASE=n. So check for CONFIG_RELOCATABLE instead.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231129111555.3594833-45-ardb@google.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: fix build warning for ARM64_MEMSTART_SHIFT

When building with W=1, the following warning occurs.

arch/arm64/include/asm/kernel-pgtable.h:129:41: error: "PUD_SHIFT" is not defined, evaluates to 0 [-Werror=undef]
129 | #define ARM64_MEMSTART_SHIFT PUD_SHIFT
| ^~~~~~~~~
arch/arm64/include/asm/kernel-pgtable.h:142:5: note: in expansion of macro ‘ARM64_MEMSTART_SHIFT’
142 | #if ARM64_MEMSTART_SHIFT < SECTION_SIZE_BITS
| ^~~~~~~~~~~~~~~~~~~~

The generic PUD_SHIFT was defined in include/asm-generic/pgtable-nopud.h,
however the #ifndef __ASSEMBLY__ guard in this header file makes it unavailable
for assembly files. While someone .S file include the <asm/kernel-pgtable.h>,
the build warning would occur. Now move the macro ARM64_MEMSTART_SHIFT and
ARM64_MEMSTART_ALIGN to arch/arm64/mm/init.c where it is used only, to avoid
this issue.

Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230804075615.3334756-1-chris.zjh@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: add PTE_UXN/PTE_WRITE to SWAPPER_*_FLAGS

With PIE enabled, the swapper PTEs would have a Permission Indirection Index
(PIIndex) of 0. A PIIndex of 0 is not currently used by any other PTEs.

To avoid using index 0 specifically for the swapper PTEs, mark them as
PTE_UXN and PTE_WRITE, so that they map to a PAGE_KERNEL_EXEC equivalent.

This also adds PTE_WRITE to KPTI_NG_PTE_FLAGS, which was tested by booting
with kpti=on.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230606145859.697944-12-joey.gouly@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mm: always map fixmap at page granularity

Today the fixmap code largely maps elements at PAGE_SIZE granularity,
but we special-case the FDT mapping such that it can be mapped with 2M
block mappings when 4K pages are in use. The original rationale for this
was simplicity, but it has some unfortunate side-effects, and
complicates portions of the fixmap code (i.e. is not so simple after
all).

The FDT can be up to 2M in size but is only required to have 8-byte
alignment, and so it may straddle a 2M boundary. Thus when using 2M
block mappings we may map up to 4M of memory surrounding the FDT. This
is unfortunate as most of that memory will be unrelated to the FDT, and
any pages which happen to share a 2M block with the FDT will by mapped
with Normal Write-Back Cacheable attributes, which might not be what we
want elsewhere (e.g. for carve-outs using Non-Cacheable attributes).

The logic to handle mapping the FDT with 2M blocks requires some special
cases in the fixmap code, and ties it to the early page table
configuration by virtue of the SWAPPER_TABLE_SHIFT and
SWAPPER_BLOCK_SIZE constants used to determine the granularity used to
map the FDT.

This patch simplifies the FDT logic and removes the unnecessary mappings
of surrounding pages by always mapping the FDT at page granularity as
with all other fixmap mappings. To do so we statically reserve multiple
PTE tables to cover the fixmap VA range. Since the FDT can be at most
2M, for 4K pages we only need to allocate a single additional PTE table,
and for 16K and 64K pages the existing single PTE table is sufficient.

The PTE table allocation scales with the number of slots reserved in the
fixmap, and so this also makes it easier to add more fixmap entries if
we require those in future.

Our VA layout means that the fixmap will always fall within a single PMD
table (and consequently, within a single PUD/P4D/PGD entry), which we
can verify at compile time with a static_assert(). With that assert a
number of runtime warnings become impossible, and are removed.

I've boot-tested this patch with both 4K and 64K pages.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20230406152759.4164229-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64/mm: Drop ARM64_KERNEL_USES_PMD_MAPS

Currently ARM64_KERNEL_USES_PMD_MAPS is an unnecessary abstraction. Kernel
mapping at PMD (aka huge page aka block) level, is only applicable with 4K
base page, which makes it 2MB aligned, a necessary requirement for linear
mapping and physical memory start address. This can be easily achieved by
directly checking against base page size itself. This drops off the macro
ARM64_KERNE_USES_PMD_MAPS which is redundant.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20221108034406.2950071-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: mm: Reserve enough pages for the initial ID map

The logic that conditionally allocates one additional page at each
swapper page table level if KASLR is enabled is also applied to the
initial ID map, now that we have started using the same set of macros
to allocate the space for it.

However, the placement of the kernel in physical memory might result in
additional pages being needed at any level, even if KASLR is disabled in
the build. So account for this in the computation.

Fixes: c3cee924bd85 ("arm64: head: cover entire kernel image in initial ID map")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220826164800.2059148-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64: head: create a temporary FDT mapping in the initial ID map

We need to access the DT very early to get at the command line and the
KASLR seed, which currently means we rely on some hacks to call into the
kernel before really calling into the kernel, which is undesirable.

So instead, let's create a mapping for the FDT in the initial ID map,
which is feasible now that it has been extended to cover more than a
single page or block, and can be updated in place to remap other output
addresses.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-15-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64: head: cover entire kernel image in initial ID map

As a first step towards avoiding the need to create, tear down and
recreate the kernel virtual mapping with MMU and caches disabled, start
by expanding the ID map so it covers the page tables as well as all
executable code. This will allow us to populate the page tables with the
MMU and caches on, and call KASLR init code before setting up the
virtual mapping.

Since this ID map is only needed at boot, create it as a temporary set
of page tables, and populate the permanent ID map after enabling the MMU
and caches. While at it, switch to read-only attributes for the where
possible, as writable permissions are only needed for the initial kernel
page tables. Note that on 4k granule configurations, the permanent ID
map will now be reduced to a single page rather than a 2M block mapping.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-13-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64: head: avoid over-mapping in map_memory

The `compute_indices` and `populate_entries` macros operate on inclusive
bounds, and thus the `map_memory` macro which uses them also operates
on inclusive bounds.

We pass `_end` and `_idmap_text_end` to `map_memory`, but these are
exclusive bounds, and if one of these is sufficiently aligned (as a
result of kernel configuration, physical placement, and KASLR), then:

* In `compute_indices`, the computed `iend` will be in the page/block *after*
the final byte of the intended mapping.

* In `populate_entries`, an unnecessary entry will be created at the end
of each level of table. At the leaf level, this entry will map up to
SWAPPER_BLOCK_SIZE bytes of physical addresses that we did not intend
to map.

As we may map up to SWAPPER_BLOCK_SIZE bytes more than intended, we may
violate the boot protocol and map physical address past the 2MiB-aligned
end address we are permitted to map. As we map these with Normal memory
attributes, this may result in further problems depending on what these
physical addresses correspond to.

The final entry at each level may require an additional table at that
level. As EARLY_ENTRIES() calculates an inclusive bound, we allocate
enough memory for this.

Avoid the extraneous mapping by having map_memory convert the exclusive
end address to an inclusive end address by subtracting one, and do
likewise in EARLY_ENTRIES() when calculating the number of required
tables. For clarity, comments are updated to more clearly document which
boundaries the macros operate on. For consistency with the other
macros, the comments in map_memory are also updated to describe `vstart`
and `vend` as virtual addresses.

Fixes: 0370b31e4845 ("arm64: Extend early page table code to allow for larger kernels")
Cc: <stable@vger.kernel.org> # 4.16.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210823101253.55567-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPS

ARM64_SWAPPER_USES_SECTION_MAPS implies that a PMD level huge page mappings
are used for swapper, idmap and vmemmap. Lets make it PMD explicit removing
any possible confusion with generic memory sections and also bit generic as
it's applicable for idmap and vmemmap mappings as well. Hence rename it as
ARM64_KERNEL_USES_PMD_MAPS instead.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623991622-24294-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64/mm: Drop SECTION_[SHIFT|SIZE|MASK]

SECTION_[SHIFT|SIZE|MASK] are essentially PMD_[SHIFT|SIZE|MASK]. But these
create confusion being similar to generic sparsemem memory sections, which
are derived from SECTION_SIZE_BITS. Section references have always implied
PMD level block mapping. Instead just use all PMD level macros which would
make it explicit and also remove confusion with sparsmem memory sections.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623658706-7182-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64/mm: Use CONT_PMD_SHIFT for ARM64_MEMSTART_SHIFT

ARM64_MEMSTART_SIZE needs to be aligned with CONT_PMD_SIZE on 16K page size
config. Hence just directly use CONT_PMD_SHIFT.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623663755-8949-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64/mm: Drop SWAPPER_INIT_MAP_SIZE

The commit cdef5f6e9e0e ("arm64: mm: allocate pagetables anywhere") had
dropped the last reference to SWAPPER_INIT_MAP_SIZE. Hence just clean up.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/1623665411-20055-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Force SPARSEMEM_VMEMMAP as the only memory management model

Currently arm64 allows a choice of FLATMEM, SPARSEMEM and
SPARSEMEM_VMEMMAP. However, only the latter is tested regularly. FLATMEM
does not seem to boot in certain configurations (guest under KVM with
Qemu as a VMM). Since the reduction of the SECTION_SIZE_BITS to 27 (4K
pages) or 29 (64K page), there's little argument against the memory
wasted by the mem_map array with SPARSEMEM.

Make SPARSEMEM_VMEMMAP the only available option, non-selectable, and
remove the corresponding #ifdefs under arch/arm64/.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20210420093559.23168-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: consistently use reserved_pg_dir

Depending on configuration options and specific code paths, we either
use the empty_zero_page or the configuration-dependent reserved_ttbr0
as a reserved value for TTBR{0,1}_EL1.

To simplify this code, let's always allocate and use the same
reserved_pg_dir, replacing reserved_ttbr0. Note that this is allocated
(and hence pre-zeroed), and is also marked as read-only in the kernel
Image mapping.

Keeping this separate from the empty_zero_page potentially helps with
robustness as the empty_zero_page is used in a number of cases where a
failure to map it read-only could allow it to become corrupted.

The (presently unused) swapper_pg_end symbol is also removed, and
comments are added wherever we rely on the offsets between the
pre-allocated pg_dirs to keep these cases easily identifiable.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201103102229.8542-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: get rid of TEXT_OFFSET

TEXT_OFFSET serves no purpose, and for this reason, it was redefined
as 0x0 in the v5.8 timeframe. Since this does not appear to have caused
any issues that require us to revisit that decision, let's get rid of the
macro entirely, along with any references to it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200825135440.11288-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Reduce the number of header files pulled into vmlinux.lds.S

Although vmlinux.lds.S smells like an assembly file and is compiled
with __ASSEMBLY__ defined, it's actually just fed to the preprocessor to
create our linker script. This means that any assembly macros defined
by headers that it includes will result in a helpful link error:

| aarch64-linux-gnu-ld:./arch/arm64/kernel/vmlinux.lds:1: syntax error

In preparation for an arm64-private asm/rwonce.h implementation, which
will end up pulling assembly macros into linux/compiler.h, reduce the
number of headers we include directly and transitively in vmlinux.lds.S

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will@kernel.org>

mm: introduce include/linux/pgtable.h

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/mm: Separate boot-time page tables from swapper_pg_dir

Since the address of swapper_pg_dir is fixed for a given kernel image,
it is an attractive target for manipulation via an arbitrary write. To
mitigate this we'd like to make it read-only by moving it into the
rodata section.

We require that swapper_pg_dir is at a fixed offset from tramp_pg_dir
and reserved_ttbr0, so these will also need to move into rodata.
However, swapper_pg_dir is allocated along with some transient page
tables used for boot which we do not want to move into rodata.

As a step towards this, this patch separates the boot-time page tables
into a new init_pg_dir, and reduces swapper_pg_dir to the single page it
needs to be. This allows us to retain the relationship between
swapper_pg_dir, tramp_pg_dir, and swapper_pg_dir, while cleanly
separating these from the boot-time page tables.

The init_pg_dir holds all of the pgd/pud/pmd/pte levels needed during
boot, and all of these levels will be freed when we switch to the
swapper_pg_dir, which is initialized by the existing code in
paging_init(). Since we start off on the init_pg_dir, we no longer need
to allocate a transient page table in paging_init() in order to ensure
that swapper_pg_dir isn't live while we initialize it.

There should be no functional change as a result of this patch.

Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
Reviewed-by: James Morse <james.morse@arm.com>
[Mark: place init_pg_dir after BSS, fold mm changes, commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()

To allow systems which do not require kpti to continue running with
global kernel mappings (which appears to be a requirement for Cavium
ThunderX due to a CPU erratum), make the use of nG in the kernel page
tables dependent on arm64_kernel_unmapped_at_el0(), which is resolved
at runtime.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Extend early page table code to allow for larger kernels

Currently the early assembler page table code assumes that precisely
1xpgd, 1xpud, 1xpmd are sufficient to represent the early kernel text
mappings.

Unfortunately this is rarely the case when running with a 16KB granule,
and we also run into limits with 4KB granule when building much larger
kernels.

This patch re-writes the early page table logic to compute indices of
mappings for each level of page table, and if multiple indices are
required, the next-level page table is scaled up accordingly.

Also the required size of the swapper_pg_dir is computed at link time
to cover the mapping [KIMAGE_ADDR + VOFFSET, _end]. When KASLR is
enabled, an extra page is set aside for each level that may require extra
entries at runtime.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mm: Use non-global mappings for kernel space

In preparation for unmapping the kernel whilst running in userspace,
make the kernel mappings non-global so we can avoid expensive TLB
invalidation on kernel exit to userspace.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1

This patch adds the uaccess macros/functions to disable access to user
space by setting TTBR0_EL1 to a reserved zeroed page. Since the value
written to TTBR0_EL1 must be a physical address, for simplicity this
patch introduces a reserved_ttbr0 page at a constant offset from
swapper_pg_dir. The uaccess_disable code uses the ttbr1_el1 value
adjusted by the reserved_ttbr0 offset.

Enabling access to user is done by restoring TTBR0_EL1 with the value
from the struct thread_info ttbr0 variable. Interrupts must be disabled
during the uaccess_ttbr0_enable code to ensure the atomicity of the
thread_info.ttbr0 read and TTBR0_EL1 write. This patch also moves the
get_thread_info asm macro from entry.S to assembler.h for reuse in the
uaccess_ttbr0_* macros.

Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: choose memstart_addr based on minimum sparsemem section alignment

This redefines ARM64_MEMSTART_ALIGN in terms of the minimal alignment
required by sparsemem vmemmap. This comes down to using 1 GB for all
translation granules if CONFIG_SPARSEMEM_VMEMMAP is enabled.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: allow kernel Image to be loaded anywhere in physical memory

This relaxes the kernel Image placement requirements, so that it
may be placed at any 2 MB aligned offset in physical memory.

This is accomplished by ignoring PHYS_OFFSET when installing
memblocks, and accounting for the apparent virtual offset of
the kernel Image. As a result, virtual address references
below PAGE_OFFSET are correctly mapped onto physical references
into the kernel Image regardless of where it sits in memory.

Special care needs to be taken for dealing with memory limits passed
via mem=, since the generic implementation clips memory top down, which
may clip the kernel image itself if it is loaded high up in memory. To
deal with this case, we simply add back the memory covering the kernel
image, which may result in more memory to be retained than was passed
as a mem= parameter.

Since mem= should not be considered a production feature, a panic notifier
handler is installed that dumps the memory limit at panic time if one was
set.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Calculate size for idmap_pg_dir at compile time

Now that we can calculate the number of levels required for
mapping a va width, reserve exact number of pages that would
be required to cover the idmap. The idmap should be able to handle
the maximum physical address size supported.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Handle section maps for swapper/idmap

We use section maps with 4K page size to create the swapper/idmaps.
So far we have used !64K or 4K checks to handle the case where we
use the section maps.
This patch adds a new symbol, ARM64_SWAPPER_USES_SECTION_MAPS, to
handle cases where we use section maps, instead of using the page size
symbols.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Move swapper pagetable definitions

Move the kernel pagetable (both swapper and idmap) definitions
from the generic asm/page.h to a new file, asm/kernel-pgtable.h.

This is mostly a cosmetic change, to clean up the asm/page.h to
get rid of the arch specific details which are not needed by the
generic code.

Also renames the symbols to prevent conflicts. e.g,
BLOCK_SHIFT => SWAPPER_BLOCK_SHIFT

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>