History log of /linux-master/README
Revision Date Author Comments
# a7ddcea5 03-Sep-2018 Henrik Austad <henrik@austad.us>

Drop all 00-INDEX files from Documentation/

This is a respin with a wider audience (all that get_maintainer returned)
and I know this spams a *lot* of people. Not sure what would be the correct
way, so my apologies for ruining your inbox.

The 00-INDEX files are supposed to give a summary of all files present
in a directory, but these files are horribly out of date and their
usefulness is brought into question. Often a simple "ls" would reveal
the same information as the filenames are generally quite descriptive as
a short introduction to what the file covers (it should not surprise
anyone what Documentation/sched/sched-design-CFS.txt covers)

A few years back it was mentioned that these files were no longer really
needed, and they have since then grown further out of date, so perhaps
it is time to just throw them out.

A short status yields the following _outdated_ 00-INDEX files, first
counter is files listed in 00-INDEX but missing in the directory, last
is files present but not listed in 00-INDEX.

List of outdated 00-INDEX:
Documentation: (4/10)
Documentation/sysctl: (0/1)
Documentation/timers: (1/0)
Documentation/blockdev: (3/1)
Documentation/w1/slaves: (0/1)
Documentation/locking: (0/1)
Documentation/devicetree: (0/5)
Documentation/power: (1/1)
Documentation/powerpc: (0/5)
Documentation/arm: (1/0)
Documentation/x86: (0/9)
Documentation/x86/x86_64: (1/1)
Documentation/scsi: (4/4)
Documentation/filesystems: (2/9)
Documentation/filesystems/nfs: (0/2)
Documentation/cgroup-v1: (0/2)
Documentation/kbuild: (0/4)
Documentation/spi: (1/0)
Documentation/virtual/kvm: (1/0)
Documentation/scheduler: (0/2)
Documentation/fb: (0/1)
Documentation/block: (0/1)
Documentation/networking: (6/37)
Documentation/vm: (1/3)

Then there are 364 subdirectories in Documentation/ with several files that
are missing 00-INDEX alltogether (and another 120 with a single file and no
00-INDEX).

I don't really have an opinion to whether or not we /should/ have 00-INDEX,
but the above 00-INDEX should either be removed or be kept up to date. If
we should keep the files, I can try to keep them updated, but I rather not
if we just want to delete them anyway.

As a starting point, remove all index-files and references to 00-INDEX and
see where the discussion is going.

Signed-off-by: Henrik Austad <henrik@austad.us>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Just-do-it-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: [Almost everybody else]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 4b290af0 21-Mar-2018 Jonathan Corbet <corbet@lwn.net>

Docs: Added a pointer to the formatted docs to README

Kernel.org nicely maintains an online copy of the formatted documentation;
tell our users that it exists.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 9f4a68e4 16-Mar-2018 Martin Kepplinger <martink@posteo.de>

README: Improve documentation descriptions

"This file" indeed was moved once, but at some point "this file", the
top-level README, becomes a file in itself. Now that time has come :)

Let's describe how things are, and suggest reading "this file" first,
"this file" simply being a the admin-guide README file, not a file that
was once moved.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 6bef44b9 18-Oct-2016 Mauro Carvalho Chehab <mchehab@kernel.org>

README: add a new README file, pointing to the Documentation/

As we moved the real README file to Documentation/admin-guide/README.rst,
let's add a replacement, pointing to it, and giving the main directions
about documentation.

In the future, perhaps it would be worth to move the contents
of Documentation/00-Index into this README.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>


# 44b10006 21-Sep-2016 Mauro Carvalho Chehab <mchehab@kernel.org>

README: convert it to ReST markup

Adjust the readme file for it to use the ReST markup:

- add chapter/section markups;
- use ``foo`` for commands;
- use :: for verbatim and script blocks;
- replace unsupported markup _foo_ by **foo**;
- add cross-references to other ReST files;
- use lower case on the section titles, to match other ReST files.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>


# 35db7e94 26-Jul-2016 Øyvind A. Holm <sunny@sunbase.org>

README: Delete obsolete i386 info + update arch/i386/ paths

Support for i386 was removed in v3.8, delete the paragraph that says
processor types above 386 won't work on that architecture. It's obsolete
information and potentially confusing. Also change a couple of
"arch/i386/" paths to one that exists now, using "arch/x86/" instead.

Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# cfaf790f 03-Apr-2016 Diego Viola <diego.viola@gmail.com>

README: remove trailing whitespace

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 3047bcc5 05-Dec-2015 Diego Viola <diego.viola@gmail.com>

README: cosmetic fixes

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# ad29fff8 14-Sep-2015 Vineet Gupta <Vineet.Gupta1@synopsys.com>

README: Add ARC architecture

ARC support was added back in 2013 but I missed updating here

Reported-by: Francois Bedard <fbedard@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 79398057 06-Jul-2015 Diego Viola <diego.viola@gmail.com>

README: GTK+ is a acronym

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>


# 6609b638 06-Jul-2015 Diego Viola <diego.viola@gmail.com>

README: GTK+ is a acronym

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 1913c6f4 03-Mar-2015 Yaowei Bai <bywxiaobai@163.com>

README: Change gzip/bzip2 to xz compression format

Kernel.org is only hosting patches and kernel compressed with xz,
so change the old gzip/bzip2 instances to xz.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# 49d86dc9 24-Feb-2015 Jeff Kirsher <jeffrey.t.kirsher@intel.com>

README: Update version number reference

When 4.0 is released, the README should reflect the new numbering.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>


# fc0d1b93 24-Oct-2012 Kees Cook <keescook@chromium.org>

README: document "make olddefconfig"

While "olddefconfig" was documented in "make help", it was not mentioned
in the README.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 80b810b2 05-Oct-2012 Steven Rostedt <rostedt@goodmis.org>

localmodconfig: Document localmodconfig in README

Someone (over a year ago :-p) asked me to document localmodconfig in the
README file in the source code. I thought it was a good idea but other
things were more important and I simply forgot about it. Well, I
stumbled on the email asking me about this and I'm sending it out now.

Signed-off-by: Steven "Mr. Procrastinator" Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>


# 3773b454 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Remove sporadic tabs

Indentation was already done mainly with spaces, so this commit
removes the tabs and makes some of the whitespace more consistent.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 7f65e924 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Consolidate discussions of -stable patches

The nature of the patches for the -stable kernels was discussed
twice; this commit consolidates those discussions into one
paragraph.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# c072c3f0 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Capitalize start of sentence

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 88f7a642 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: More consistent and readable white space

Mainly, this just separates paragraphs, so that the text is easier
on the eyes.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 6d12760c 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: `Alternately' -> `Alternatively'

Also, one `Alternate' was changed to `Alternative' for the
sake of consistency.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# a6144bb9 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Better comma usage

For the most part, this commit simply introduces commas to
offset modifiers.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# a20e3a79 03-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Grammar: `me has' -> `I have'

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 5b4285fb 01-Apr-2012 Michael Witten <mfwitten@gmail.com>

README: Use `X' and `x' consistently

The text referred to `XX', when only a single `X' actually
existed, so this commit changes it to just `X'; a similar
change has been made for `xx'.

Also, `N' was used when it would have been more consistent
to use `X' again, so this commit replaces `N' with `X'.

This commit also chooses to leave `X' as the placeholder
for the current version of the source, and then makes `x'
the placeholder for any version number; fortunately nothing
really depends on this subtlety being understood.

Because `x' is already being used when discussing version
numbers, this commit changes such filename references as
`xxx.rej' to `some-file-name.rej'.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>


# 0466dcbe 30-Jun-2011 Jesper Juhl <jj@chaosbits.net>

Update version number references in README

When 3.0 is released I believe the README should reflect the new
numbering.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>


# cddb5de0 24-Nov-2010 Tracey Dent <tdent48227@gmail.com>

Readme: Add architecture

Add Tilera Tile architecture to the list of the architectures
that Linux at least runs on.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>


# b3235fe4 01-Oct-2010 Andrea Gelmini <andrea.gelmini@gelma.net>

README: cite nconfig

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>


# b2d89930 12-Jun-2009 Patrick Ringl <patrick_@freenet.de>

README: fix misleading pointer to the defconf directory

Signed-off-by: Patrick Ringl <patrick_@freenet.de>
Cc: Arnd Bergmann <arnd@arndb.de>


# 590a5857 17-May-2009 Markus Heidelberg <markus.heidelberg@web.de>

kconfig: add a note about the deps to the 'silentoldconfig' help

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>


# ad444684 20-Feb-2009 Li Zefan <lizf@cn.fujitsu.com>

README: fix a wrong filename

It should be Documentation/build/kconfig.txt.

Introduced by commit 2af238e455ef5fd31c2f7a06c2db3f13d843b9bf
("kbuild: make *config usage docs").

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>


# 2af238e4 29-Feb-2008 Randy Dunlap <randy.dunlap@oracle.com>

kbuild: make *config usage docs

Create a kconfig user assistance guide, with a few tips and hints
about using menuconfig, xconfig, and gconfig.

Mostly contains user interface, environment variables, and search topics,
along with mini.config/custom.config usage.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>


# 6840999b 17-Nov-2007 Sam Ravnborg <sam@ravnborg.org>

x86: simplify "make ARCH=x86" and fix kconfig all.config

Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
- 0f855aa64b3f63d35a891510cf7db932a435c116 ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5cd2febbab21a93c8943f8d3eece4d3 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>


# 80ef88d6 17-Nov-2007 Sam Ravnborg <sam@ravnborg.org>

x86: simplify "make ARCH=x86" and fix kconfig all.config

Simplify "make ARCH=x86" and fix kconfig so we again
can set 64BIT in all.config.

For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
0f855aa64b3f63d35a891510cf7db932a435c116
-> kconfig: add helper to set config symbol from environment variable

2a113281f5cd2febbab21a93c8943f8d3eece4d3
-> kconfig: use $K64BIT to set 64BIT with all*config targets

Roman Zippel pointed out that kconfig supported string
compares so the additional complexity introduced by the
above two patches were not needed.

With this patch we have following behaviour:

# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit

The general rule are that ARCH= and native architecture
takes precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit
kernel no matter what the configuration says.
The configuration will be updated to 32-bit if it was
configured to 64-bit and the other way around.

This behaviour is consistent with previous behaviour so
no suprises here.

make ARCH=x86 will per default result in a 32-bit kernel
but as the only ARCH= value x86 allow the user to select
between 32-bit and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>


# 2a113281 10-Nov-2007 Sam Ravnborg <sam@ravnborg.org>

kconfig: use $K64BIT to set 64BIT with all*config targets

The variable K64BIT can now be used to select the
value of CONFIG_64BIT.

This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n

To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>


# 31714705 17-Feb-2007 Jesper Juhl <jesper.juhl@gmail.com>

Remove duplicate listing of Cris arch from README

Mikael Pettersson pointed out to me that a recent patch of mine (commit
620034c84d1d939717bdfbe02c51a3fee43541c3), that made some corrections to the
README file, accidentally listed the Cris architecture twice. Whoops.

This patch removes the duplicate.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>


# 99ddcc7e 23-Jan-2007 Linus Torvalds <torvalds@woody.linux-foundation.org>

Change Linus' email address too

This changes a few mentions of my email address to point to the new one,
leaving things like old copyright messages alone.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>


# 620034c8 06-Dec-2006 Jesper Juhl <jesper.juhl@gmail.com>

[PATCH] A few small additions and corrections to README

Here's a small patch which

- adds a few archs to the current list of supported platforms.
- adds a few missing slashes at the end of URLs.
- adds a few references to additional documentation.
- adds "make config" to the list of possible configuration targets.
- makes a few other minor changes.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
[ Ben Nizette <ben.nizette@iinet.net.au> points out AVR32 arch too ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# 9dfb563b 18-Apr-2006 Randy Dunlap <rdunlap@infradead.org>

[PATCH] config: update usage/help info

Replace outdated help message with a reference to README. Update README
for make *config variants and environment variable info.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# 2b422383 20-Mar-2006 H�kon L�vdal <Hakon.Lovdal@ericsson.com>

README: bzip2 is not new

From: H�kon L�vdal <Hakon.Lovdal@ericsson.com>

Signed-off-by: H�kon L�vdal <Hakon.Lovdal@ericsson.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>


# 4f4e2dc3 14-Jan-2006 Xose Vazquez Perez <xose.vazquez@gmail.com>

[PATCH] README updated

Replace old information with newer from kernel.org

Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# a1365647 08-Jan-2006 Andrew Morton <akpm@osdl.org>

[PATCH] remove gcc-2 checks

Remove various things which were checking for gcc-1.x and gcc-2.x compilers.

From: Adrian Bunk <bunk@stusta.de>

Some documentation updates and removes some code paths for gcc < 3.2.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# 6ad44229 13-Nov-2005 Jesper Juhl <jesper.juhl@gmail.com>

[PATCH] README: add info about -stable to README and point at applying-patches.txt

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# b39f72fe 30-Oct-2005 Horms <horms@debian.org>

[PATCH] README doesn't mention bzip2 source tarball

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# e3fc4cc1 22-Sep-2005 Randy Dunlap <rdunlap@infradead.org>

[PATCH] corrections to top-level README

Corrections to the recent top-level README changes.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# f875a1a6 21-Sep-2005 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

[PATCH] README update from the stone age

We have no options which the user can set in the Makefile. Only the
EXTRAVERSION, which is also useful in place of the "backup modules"
suggestion.

We don't have configuration options in the top Makefile.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# 896e5518 27-Jul-2005 Kurt Wall <kwall@kurtwerks.com>

[PATCH] Add text for dealing with "dot releases" to README

The emergence of so-called "dot releases" that are non-incremental patches
against a base kernel requires different handling of patches (revert
previous patches before applying the newest one). This patch adds a
paragrach to $TOPDIR/README explaining how to do deal with dot release
patches.

Signed-off-by: Kurt Wall <kwall@kurtwerks.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>


# 1da177e4 16-Apr-2005 Linus Torvalds <torvalds@ppc970.osdl.org>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!