dt-bindings: Fix SPI and I2C bus node names in examples

SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:

git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'

With this, a few errors in examples were exposed and fixed.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: power: supply: maxim,max17042: allow power-supplies

MAX17042 Fuel Gauge uses power-supplies supplies:

arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: fuel-gauge@36: 'power-supplies' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

dt-bindings: power: supply: drop quotes when not needed

Id and schema fields do not need quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-3-krzysztof.kozlowski@linaro.org

dt-bindings: power: supply: max17042: describe interrupt

The Maxim 17042-family of fuel gauges are often embedded in other Maxim
chips, e.g. in Maxim 77693 which is a companion power management IC.
In such designs there might be actually two interrupts:
- INTB signaling change from charger, flash or MUIC,
- ALERT signaling change from fuel gauge.

Describe the interrupt in bindings to make it clear it is about the fuel
gauge ALERT interrupt, not the INT.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

dt-bindings: power: supply: max17042: Document max77849-battery

max77849 is a combined fuel-gauge, charger and MUIC device. Add it to
the bindings documentation.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

dt-bindings: power: supply: max17042: Convert to DT schema format

Convert the binding to DT schema format.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>