Fix wl(4) after r332288, using the same fix applied in r332331. This
driver no longer exists in head, so this is a direct commit to 11-stable.

Fix wl(4) after r332288.

I missed that this was an assignment (a bad pattern, use another
member) on i386. As wl(4) is i386 only and gone in head, just
expand the ifr_ifru member rather than adding an accessor.

Reported by: gjb

MFC r331797:

Use an accessor function to access ifr_data.

This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size).

Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900

Add deprecation notices for various device drivers removed in 12.0.

This is a direct commit to stable/11 since these files have already
been removed in head.

Reviewed by: sbruno, gjb
Differential Revision: https://reviews.freebsd.org/D11542

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

sys/dev: minor spelling fixes.

Most affect comments, very few have user-visible effects.

Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.

On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544

Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().

Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370

Convert rman to use rman_res_t instead of u_long

Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075

Various fixes for wl(4):
- Don't recurse driver mutex.
- Don't hold driver mutex across fubyte/subyte.
- Replace fubyte/subyte loops with copyin/copyout calls.
- Use relatively sane locking in wl_ioctl().
- Use bus space accessors instead of in*()/out*().
- Use callout(9) instead of timeout(9).
- Stop watchdog timer in detach and don't hold mutex across
bus_teardown_intr().
- Use device_printf() and if_printf().
- De-spl().

Tested by: no one

Mechanically convert to if_inc_counter().

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

These drivers only set if_timer but never set if_watchdog. Just remove
the assignments to if_timer.

Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by: re (kib)
MFC after: 6 weeks

Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource(). This is needed for pc98 by upcoming nexus related
change.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Approved by: re (implicit?)

Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges. These may
require some future tweaking.

Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>

Trival whitespace change.

- Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.

Catch up with IFP2ENADDR() type change (array -> pointer).

Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.

Fix FBSDid style nit.

Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by: pjd, bz
MFC after: 7 days

Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

Move if_wl_i82586.h into sys/dev/wl.

Start each of the license/copyright comments with /*-, minor shuffle of lines

Add missing <sys/module.h> includes

We don't need to initialize if_output, ether_ifattach() does it
for us.

Remove unused WL_IRQS macro.

Remove improper use of if_addrhead in device drivers to check
if the link-level address has been initialized already.

The majority of modern drivers never does this and works fine, which
makes me think that the check is totally unnecessary and a residue
of cut&paste from other drivers.

This change is done to simplify locking because now almost none of the
drivers uses this field. The exceptions are "ct" "ctau" and "cx"
where i am not sure if i can remove that part.

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Announce ethernet MAC addresss in ether_ifattach().

Drop the driver lock around calls to if_input to avoid a LOR when
the packets are immediately returned for sending (e.g. when bridging
or packet forwarding). There are more efficient ways to do this
but for now use the least intrusive approach.

Reviewed by: imp, rwatson

Try to create some sort of consistency in how the routings to find the
multicast hash are written. There are still two distinct algorithms used,
and there actually isn't any reason each driver should have its own copy
of this function as they could all share one copy of it (if it grew an
additional argument).

Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)

Use __FBSDID().
Also some minor style cleanups.

Get wlread() closer to working. Use m->m_len as the initial value for
bytes_in_mbuf rather than MCLBYTES. Add the ethertnet header to the
front of the mbuf. Adjust bytes_in_mbuf inside the loop that reads
the packet out of the card.

Add locking to wlinit().

Put the spl calls back until we are sure that everything that they cover
are locked.

Add locking and remove all the spl() calls.

Get rid of COMPAT_OLDISA and move in the direction of newbus.

Remove the register keyword.

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.

Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.

network interface driver changes:

o don't strip the Ethernet header from inbound packets; pass packets
up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by: many
Approved by: re

Fix typo in the BSD copyright: s/withough/without/

Spotted and suggested by: des
MFC after: 3 weeks

Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on: smp@

Remove support for FreeBSD 2.x from this driver.

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

Minor style(9) changes before I get going.

Fix a couple of compile warnings because WLDEBUG and WLCACHE were
not defined.

Move wl driver to dev/wl. Repo copied to dev/wl, the old copies
removed and a minimal number of changes to make it compile in the new
location.

# I have a fully converted on a disk that may be crashed. If it is
# crashed, I'll redo the work.

Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by: mikeh

Another round of the <sys/queue.h> FOREACH transmogriffer.

Created with: sed(1)
Reviewed by: md5(1)

Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)

Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.

Remove unneeded #include <machine/clock.h>

Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by: julian, freebsd-net

Mass update of isa drivers using compatability shims to use
COMPAT_ISA_DRIVER() so that we can get rid of the evil isa_compat.h table.

Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by: freebsd-net

Add $FreeBSD$

Remove NBPF conditionality of bpf calls in most of our network drivers.

This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.

wlinit() must be called to recalculate the multicast filter.

Submitted by: Francis Dupont <Francis.Dupont@inria.fr>

$Id$ -> $FreeBSD$

Make these actually compile. I got a little delete happy pruning includes
and used 'command' instead of 'cmd' in a few cases. Also clear up some
unused variables.

Pointed out by: phk

SIOCSIFADDR, SIOCGIFADDR, and SIOCSIFMTU are implemented in
sys/net/if_ethersubr.c:ether_ioctl(). Drivers need not implement generic
behavior.

PR: kern/12126
Submitted by: in part by Boris Popov <bp@butya.kz>

Rename bpfilter to bpf.

Suser() simplification:

1:
s/suser/suser_xxx/

2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.

Silence warnings.

Someday I hope people will learn that "#endif" is not a comment
introducer in ANSI C.

The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.

Depend on __FreeBSD_version instead of __FreeBSD__

Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c. Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato

Fixed printf format errors. Only one left in LINT on i386's.

A better fix for kern/7144:

The check for dropping unicast packets not sent to our ethernet
address is after the bpf tap, but not conditioned on it. All packets
received should get handed to bpf, and unicast packets not to us (mac)
should get dropped whether or not there is a bpf listener. I believe
that the common optimization that the interface is in hw promisc mode
iff there is a bpf listener is in general wrong, but more frequently
so on wavelans.

I think Max's fix makes bpf listeners not see unicast packets sent to
others, but I'm not sure.

One can argue that checking on MOD_ENAL is wrong, but the code only
drops packets that shouldn't be received. The correctness condition
is that it be run whenever unicast packets without our mac address can
be received.

PR: kern/7144
Submitted by: Greg Troxel <gdt@ir.bbn.com>

Don't declare isa device structs or isa interrupt handlers in <sys/conf>,
and don't depend on them being declared there. This will cause lots of
warnings for a few minutes until config is updated. Interrupt handlers
should never have been configured by config, and the machine generated
declarations get in the way of changing the arg type from int to void *.

This commit fixes various 64bit portability problems required for
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.

Removed unused #includes.

Make INET a proper option.

This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway. Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.

aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

Add CAM software/hardware interrupt support.

Fixed type mismatch for a (low quality interface) function with an
arg of type u_short (just write the function in ANSI C like most
other functions in this file instead of fixing the interface or
depending on a gcc feature).

Reinstate some of the previous fixes which were clobbered in r1.6.

Significant bugfix and upgrade for the Wavelan (wl) driver.
This now includes code to handle the 2.4GHz WaveModem-based cards.

Submitted by: Jim Binkley <jrb@cs.pdx.edu>

Removed unused #includes.

Fixed the type of a timeout function and removed casts that hid the
problem. There was no problem in practice (at least on 386's).

Make the multicast code compile under -current. This has not been reviewed
or tested yet. Mike may want to make some adjustments.

match the #include opt_ file with options.i386 (it has opt_wavelan.h)

Add 'wl' Wavelan driver.
Obtained from: Jim Binkley <jrb@cs.pdx.edu>