MFC r358554: Add deprecation notices to ctau and cx drivers

These support outdated or obsolete ISA WAN (T1/E1) sync serial cards,
and these drivers haven't really been touched (other than in tree-wide
sweeps to keep them building) for 15+ years.

Related PCI devices ce and cp are still in the tree, with deprecation
proposed in D23928.

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

MFC r313982, r314068:
sys: Replace zero with NULL for pointers.

Found with: devel/coccinelle

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.

On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544

Convert rman to use rman_res_t instead of u_long

Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075

CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks

In order to reduce use of M_EXT outside of the mbuf allocator and
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself. Update all callers to use the return value.

With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.

NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices. Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.

Differential Revision: https://reviews.freebsd.org/D1440
Reviewed by: adrian, bz, gnn
Sponsored by: EMC / Isilon Storage Division

Don't pass RF_ALLOCATED to bus_alloc_resource().

Convert most BPF_TAP users to BPF_MTAP.

MFC after: 2 weeks

Remove ifq_drops from struct ifqueue. Now queue drops are accounted in
struct ifnet if_oqdrops.

Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Mechanically convert to if_inc_counter().

Replace local copy-and-paste implementations of printmbuf() in several
device drivers with calls to the centralised m_print() implementation.
While the formatting and output details differ a little, the content
is essentially the same, and it is unlikely anyone has used this
debugging output in some time.

This change reduces awareness of mbuf cluster allocation (and,
especially, the M_EXT flag) outside of the mbuf allocator, which will
make it easier to refine the external storage mechanism without
disrupting drivers in the future.

Style bugs are preserved.

Reviewed by: bz, glebius
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Fxi a bunch of typos.

PR: misc/174625
Submitted by: Jeremy Chadwick <jdc@koitsu.org>

Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays

Reviewed by: cognet
Approved by: cognet

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.

Fix typos - remove duplicate "the".

PR: bin/154928
Submitted by: Eitan Adler <lists at eitanadler.com>
MFC after: 3 days

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

Always use a private timer instead of if_watchdog and if_timer to drive
the transmit watchdog. These drivers already used a private timer when
compiled to use Netgraph. This change just makes them always use the
private timer. Note that these drivers do not compile and are disconnected
from the build due to TTY changes.

Use new spelling of the NG_*LEN constants.

Remove debug.ctau.mpsafenet: we no longer support running the network
stack with conditional Giant acquisition, and IFF_NEEDSGIANT will
be removed in the near future.

Replace all calls to minor() with dev2unit().

After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by: kib

Do not set IFF_DEBUG directly from the driver.

MFC after: 1 month.

Spelling fix for interupt -> interrupt

First in a series of changes to remove the now-unused Giant compatibility
framework for non-MPSAFE network protocols:

- Remove debug_mpsafenet variable, sysctl, and tunable.
- Remove NET_NEEDS_GIANT() and associate SYSINITSs used by it to force
debug.mpsafenet=0 if non-MPSAFE protocols are compiled into the kernel.
- Remove logic to automatically flag interrupt handlers as non-MPSAFE if
debug.mpsafenet is set for an INTR_TYPE_NET handler.
- Remove logic to automatically flag netisr handlers as non-MPSAFE if
debug.mpsafenet is set.
- Remove references in a few subsystems, including NFS and Cronyx drivers,
which keyed off debug_mpsafenet to determine various aspects of their own
locking behavior.
- Convert NET_LOCK_GIANT(), NET_UNLOCK_GIANT(), and NET_ASSERT_GIANT into
no-op's, as their entire behavior was determined by the value in
debug_mpsafenet.
- Alias NET_CALLOUT_MPSAFE to CALLOUT_MPSAFE.

Many remaining references to NET_.*_GIANT() and NET_CALLOUT_MPSAFE are still
present in subsystems, and will be removed in followup commits.

Reviewed by: bz, jhb
Approved by: re (kensmith)

Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource(). This is needed for pc98 by upcoming nexus related
change.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Various bpf(4) related fixes to catch places up to the new bpf(4)
semantics.
- Stop testing bpf pointers for NULL. In some cases use
bpf_peers_present() and then call the function directly inside the
conditional block instead of the macro.
- For places where the entire conditional block is the macro, remove the
test and make the macro unconditional.
- Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of
the old semantics.

Reviewed by: csjp (older version)

Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges. These may
require some future tweaking.

Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>

Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.

Backout if_cp 1.26, if_ct 1.27, if_cx 1.47 by obrien:
----------------------------
revision 1.26
date: 2005/09/07 09:53:35; author: obrien; state: Exp; lines: +1452 -1453
Reorder code to not depend on an ISO-C illegal forward extern declaration.
----------------------------

Reason: do not move large functions location without serious reason. The same
could be done by forward function declaration. Please do not enlarge diff
without a reason any more.

Backout if_cp 1.27
----------------------------
revision 1.27
date: 2005/09/19 03:10:16; author: imp; state: Exp; lines: +3 -2
Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.

Reason: bad previous commit. Would be restored by next commit.

Reorder code to not depend on an ISO-C illegal forward extern declaration.

Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by: pjd, bz
MFC after: 7 days

Use m_length (m, NULL) instead of m->m_pkthdr.len.

Problems reported by: strijar at urai dot ru
Approved by: re (scottl)

Protect from partially initialized channels.

Approved by: re (scottl)

Space & alignment nits.

Approved by: re (scottl)

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

Use dynamic major number allocation.

Start each of the license/copyright comments with /*-, minor shuffle of lines

Make code MPSAFE.

You could turn this off by debug.mpsafenet=0 for full network
stack or via debug.{cp|cx|ctau}.mpsafenet for cp(4), cx(4) and
ctau(4) accordingly.

MFC after: 10 days

Clean up from '#if __FreeBSD_version'.

Don not call pp_down()/pp_up() form XX_tlf()/XX_tls() in non PPP mode
to privent running of PPP's state machine in non PPP mode.

MFC: after 3 days.

Remove bogus cdevsw frobbing code which tries to prevent double
loading of modules.

MODULE_VERSION() should be used for this I belive.

Make code ready to switch debug.mpsafenet to 1 since I've not able to
commit MPSAFE code for now it is just IFF_NEEDSGIANT.

Fix resource check while autodetection.

White space cleanup.

Slight cosmetic changes.
Also introduce a macro to be called by persistent nodes to signal their
persistence during shutdown to hide this mechanism from the node author.

Make node flags have a consistent style in naming.

Document the change.

Convert Netgraph to use mbuf tags to pass its meta information around.
Thanks to Sam for importing tags in a way that allowed this to be done.

Submitted by: Gleb Smirnoff <glebius@cell.sick.ru>
Also allow the sr and ar drivers to create netgraph versions of their modules.
Document the change to the ksocket node.

Use bus_dma* instead of contigmalloc()+vtophys() for RELENG_5.

Make code more clean: backout support for 3.x branch.

Second half of the dev_t cleanup.

The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()

Various minor adjustments including handling of userland access to kernel
space struct cdev etc.

Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.

Add missing <sys/module.h> includes

Switch to using C99 sparse initialisers for the type methods array.

Requested by: harti

MFC after: 1 week

Use better way of closing fr support before current sppp get it.

Sync with RELENG_4

Nursemaid: Fix tinderbox builds by removing the shadowing of the global
preprocessor macro DEBUG. DEBUG() -> CTAU_DEBUG().

1. Renames NCT constant to NCTAU. This will help while MFC to 4 branch.
2. Fix compilation and panic while system boot problem after makedev
was changed to unde2dev.

Approved by: imp (mentor)

Add support for Cronyx-Tau. For now I added only Tau-ISA files, system files
would be changed in next patches, after extra verifications.

Approved by: imp (mentor)