MFC r336084-r336085, r336118: Move zfs impl into libsa

r336084:
Move ZFS files into libsa

Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.

Discussed with: allanjude@

r336085:
Stop using ../zfs/libzfs.h but instead use libzfs.h.

While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.

r336118:
Remove dirs that git svn should have removed but didn't.

MFC: r333955

- Unbreak booting sparc64 kernels after the metadata unification in
r329190 (MFCed to stable/11 in r332150); sparc64 kernels are always
64-bit but with that revision in place, the loader was treating them
as 32-bit ones.
- In order to reduce the likelihood of this kind of breakage in the
future, #ifdef out md_load() on sparc64 and make md_load_dual() -
which is currently local to metadata.c anyway - static.
- Make md_getboothowto() - also local to metadata.c - static.
- Get rid of the unused DTB pointer on sparc64.

Approved by: re (kib)

MFC r330806-r330815, r330837, r330864, r330883

pc98 changes associated with the named commits are also included in this
commit, despite not having been made with the original commits due to its
removal in head.

r330806:
Minor cosmetic changes.

Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.

r330807:
We can't use d_opendata for blkio storage.

open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.

r330808:
Make struct libi386_devdesc match the struct devdesc better

Move data to top and call it d_opendata.

r330809:
Use the actual struct devdesc at the start of all *_devdesc structs

The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.

For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.

All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.

r330810:
Remove d_type from devdesc. It's not needed as we can fetch it from
d_dev->dv_type when we need it.

r330811:
GC unused routines.

Sponsored by: Netflix

r330812:
Use the one-line-per-file pattern here, and sort the file names.

Sponsored by: Netflix

r330813:
Move the env convenience routines out of boot1.c.

These routines are more generally useful. Even though boot1 is on its
way out, it's better to make these common during the transition than
copy them.

r330814:
Star BootCurrent entry when booting.

Sponsored by: Netflix

r330815:
Print the load and device path as well as BootCurrent and BootOrder

Sponsored by: Netflix

r330837:
biosdisk.c should not set d_opendata.

Same as 330807, d_opendata is owned by open_disk and we should not
set it.

M stand/i386/libi386/biosdisk.c

r330864:
Prefer uintXX_t to u_intXX_t

A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson

r330883:
Fix typo that misteriously passes compilation.

MFC r330365, r330371: OFW changes

r330365:
Move "common" Open Firmware parts of the loader used only on PowerPC to
the powerpc/ subdirectory. These have never used by SPARC and we have
no other (and almost certainly will have no other) Open Firmware platforms.
This makes the directory structure simpler and lets us avoid some
cargo-cult MI patterns on code that is, and always was,
architecture-specific.

r330371:
Where we can, pass the kernel an FDT facsimile of the OF device tree rather
than a pointer to Open Firmware by default. This eliminates a number of
potentially unsafe calls to firmware from the kernel and provides better
performance.

This feature is meant to be expanded until it is on by default
unconditionally and, ideally, we can then garbage-collect the
nightmare pile of hacks required to call into Open Firmware from a live
kernel.

MFC Loader Fixes Final: r327612,r327703,r327704,r327878,r327879,r327881,
r328007,r328029,r328030,r328031,r328061,r328156,r328169,r328288,r328289,
r328290,r328291,r328292,r328411,r328536,r328603,r328614,r328642,r328769,
r328779,r328780,r328781,r328782,r328783,r328806,r328808,r328826,r328835,
r328911,r328986,r328987,r328990,r328999,r329000,r329019,r329050,r329054,
r329060

r327612: Invent new #defines for the biospci_{read,write}_config function

r327703: Define __dmadat after #include'ing ufsread.c.

r327704: Fix printf missing format variables warnings.

r327878: Add GUID for UEFI boot manager variables.

r327879: Report the boot order and where we are in that boot order.

r327881: Allow this file to be included

r328007: Fix booting on some arm64 systems after r327879 by fixing the call
to utf8_to_ucs2

r328029: When returning an error and freeing allocated memory from
ucs2_to_utf8, NULL the return pointer.

r328030: Check the return value from utf8_to_ucs2 instead of whether or not
uv is NULL.

r328031: Need to free uv after we're done using it.

r328061: utf8_to_ucs2() should check for malloc failure

r328156: stand: Move sections around to fix stand/ build with ld.lld on
armv7

r328169: Remove extra copy of bootinfo.c. It's a bit rotted copy of the one
in efi/loader.

r328288: Fix some resource leaks.

r328289: Don't leak memory when displaying help.

r328290: On malloc failure, be sure to close the include file that triggered
it.

r328291: getenv does not return tainted data in the boot loader. Attempt to
clue Coverity into that fact.

r328292: There's no tainted data here, tag it as such to avoid false
positives.

r328411: loader.efi: add missing EFI GUIDs

r328536: loader: support for mixed-endianness ELF/loader and POWER8

r328603: Add missing non-POWERPC case to give the scr value something
non-zero.

r328614: Move libstand.3 to libsa.3. Update libsa.3 to include functions

r328642: Break out the interpreters (simple and forth) w/o ifdefs.

r328769: Centralize several variables.

r328779: Retire pnp.4th and the code needed only for 4th words used here.

r328780: These 4th words were an attempt to allow integration into the boot
loader scripts. However, that path won't be taken after all it
seems.

r328781: Remove pcibios forth support.

r328782: Now that we no longer conditionally compile some files outside of
ficl

r328783: Invent new LDR_INTERP for the loader interpreter to use.

r328806: We need more heap space to properly load newer powerpc kernels.

r328808: Implement strcoll as strcmp.

r328826: Make cross-endian loader changes apply only to powerpc

r328835: Fix regression introduced in r328806, preventing boot on many
platforms.

r328911: Ignore relocation tables for non-memory-resident sections.

r328986: Fix relative location of USB sources after recent move.

r328987: A more definitions to kernel emulation shim in order to build
stand/usb.

r328990: Move the stand/usb test loader into its own directory.

r328999: Fix indentation to FreeBSD standard for interp files

r329000: Move simple interpreter 'perform' into interp.c and call it

r329019: Move to tabs for indentation and to 8-space notches, per style(9).

r329050: Fix build of userboot.so

r329054: Set script.lang in the environment to either 'forth' or 'simple' to
reflect what scripting language was compiled into the loader.

r329060: loader: fix endianness conversion

PR: 225323

MFC Loader Fixes 2017q4p7: r324844,r326089,r326926,r326440,r326484,r326494,
r326588,r326708,r326784,r326914,r327390,r328446,r326090,r326143,r326144,
r326182,r326384,r326421,r326440,r326441,r326442,r326443,r326444,r326445,
r326446,r326447,r326448,r326484,r326485,r326486,r326487,r326488,r326490,
r326491,r326492,r326493,r326494,r326495,r326504,r326507,r326509,r326584,
r326585,r326586,r326587,r326588,r326589,r326590,r326591,r326592,r326593,
r326594,r326600,r326616,r326671,r326707,r326708,r326709,r326710,r326711,
r326712,r326714,r326720,r326768,r326772,r326784,r326792,r326812,r326854,
r326855,r326856,r326858,r326886,r326887,r326914,r326926,r326927,r326960,
r326961,r326962,r326963,r327351,r327453,r327390,r327523,r327524,r326489,
r327880,r328437,r328438,r328439,r328441,r328446,r328448,r328449,r328612,
r328613,r328615

While here, undo our libfdt hack of not including <stdlib.h> if we're
compiling _STANDALONE.

r324844: When building standalone, don't define errno. Let the definition from
stand.h override. This is similar to what we do in the kernel.

r326089: loader.efi: efipart does not recognize partitionless disks

r326090: net_parse_rootpath() has no parameters

r326143: Fix theoretical integer overflow issues. If the product here is

r326144: Mark the func pointer as __dead2. It looks up loader_main, which

r326182: Modify all FreeBSD bootloaders on PowerPC AIM (Book-S) systems

r326384: Use const pointers to avoid casting away constness.

r326421: loader.efi: efipart should exclude iPXE stub block protocol

r326440: Remove stale dependency on ufsread.c

r326441: Minor flags cleanup

r326442: Cleanup CFALGS usage here

r326443: We don't need both _STAND and _STANDALONE, use the latter.

r326444: Move geli to common DO32 stuff

r326445: Fix random() and srandom() prototypes to match the standard.

r326446: Undefine _STANDALONE since this is test code.

r326447: Tweaks to the beri boot loader so that it builds w/o warnings.

r326448: Fix all warnings related to geli and ZFS support on x86.

r326484: Const poison the propname.

r326485: Delcare md_load in libofw.h. Make all prototypes match for ofw

r326486: Include machine/md_var to pick up __syncicache prototype.

r326487: Cast mdp (a vm_offset_t) to void * to match prototype.

r326488: e_entry can be smaller than a pointer. Cast it to an intptr_t

r326490: Declare our strange brand of main().

r326491: Disconnet ps3 from the build. There's too many warnings to fix.

r326492: Cast void * pointer to char * so the arg matches the %s format.

r326493: Provide a md_load64 prototype.

r326494: Mark two things as unused (since they are only sometimes used)

r326495: Now it's safe to bump WARNS to 1.

r326504: Switch to proper MK_LOADER_GELI tests.

r326507: increase maximum size of zfsboot

r326509: loader.efi: add note about iPXE into the efipart.c

r326584: When building standalone, include stand.h rather than the kernel

r326585: Include ficl.h before anything else

r326586: No need to include the userland md5.h, the kernel one is just fine.

r326587: Use the kernel relative paths, rather than the userland relative
paths

r326588: Need to include skein in the include path

r326589: Make sure we include the right path for skein.h

r326590: Prefer stdint.h to inttypes.h

r326591: This isn't NetBSD specific code. Include these for any kernel /

r326592: Don't inherit CFLAGS. This a specialized test program.

r326593: Stop building with the standard system headers.

r326594: Now that we offer a semi-sane standards-ish set of #include files,
stop hacking includes with sed.

r326600: Since this is contrib code, create an upstreamable version of my

r326616: dhcp_try_rfc1048() is not used any more

r326671: Avoid setting -Wno-tentative-definition-incomplete-type with gcc.

r326707: Add partial support signal.h functioanlity. Pull in
machine/signal.h

r326708: Remove _KERNEL hack now that errno.h does the right thing when
built standalone.

r326709: Provide implementations for iscntrl, ispunct and isgraph.

r326710: Put the files we're copying over into a few variables and clean
hings up.

r326711: Const poison a couple of interfaces.

r326712: Create interp class.

r326714: boot1.c needs EFI_ZFS_BOOT too, so add it globally.

r326720: This path belongs in ficl/Makefile, not the common defines for
users

r326768: Fix a comment to be more accurate

r326772: Fix regression with lua import

r326784: Revert part of 362772. It was causing problems for includes

r326792: Attempt to unbreak buildworld

r326812: Revert r326792, r326784, r326772, r326712

r326854: libefi: make efichar.h more usable in stand code

r326855: Cargo cut a fix for the regressions r326585 caused.

r326856: Fix comments after bump in size.

r326858: Revert r326855: Cargo cut a fix for the regressions r326585 caused.

r326886: Panic in sbrk if setheap hasn't been called yet. This is preferable
o a mysterious crash

r326887: Remove the 'mini libstand in libstand' that util.[ch] provided.

r326914: Move loader-only defines to loader.mk from defs.mk

r326926: Move loader help file definitions to being 100% inside of
loader.mk.

r326927: libficl is only ever used in a loader (never a boot) program. Move
it.

r326960: Simplify things a little. The RETURN macro isn't required.

r326961: Interact is always called with NULL. Simplify code a little

r326962: Hoist btx include stuff to i386/Makefile.inc

r326963: No need to use relative paths like this here.

r327351: Fix ubldr. uboot/lib uses defines for the loader.

r327453: Add a validbcd() routine that uses the bcd2bin_data[] array

r327390: Garbage-collect loader.ps3. It is currently disconnected from the
build and kboot replaces.

r327523: Don't clobber system LDFLAGS for beri boot loaders.

r327524: Use 'extern uint8_t' instead of 'extern void' for external symbols.

r326489: Allow this file to be used in libsa without warning...

r327880: Move getsecs() prototype to stand.h from net.h so it can be used

r328437: Split panic routine

r328438: Implement abort() as a call to panic.

r328439: Provide abs form stdlib.h.

r328441: abort() should be marked __dead2 since it won't return.

r328446: Now that exit is __dead2, we need to tag ub_exit() as __dead2.

r328448: Make exit() never return until host_exit can be written.

r328449: Tag unreachable places as such. I left the while (1); in place

r328612: Move strtold wrapper from strtol.c to its own strtold.c.

r328613: Kill copies of strtol and strtoul.

r328615: Update stand.h for changes for strto*l

PR: 223969

MFC r326038,r326069,r326072: More stand simplification and fixes

r326038: Move some more common stuff up to Makefile.inc.

r326069: Fix gptzfsboot for cases with GELI.

r326072: Unbreak riscv build in universe.

MFC r325834,r325997,326502: Move sys/boot to stand/

This is effectively a direct commit to stable/11, due to differences between
stable/11 and head. Changes to DTS in sys/boot/fdt/dts were often
accompanied by kernel changes. Many of these were also risc-v updates that
likely had many more dependencies to MFC.

Because of this, sys/boot/fdt/dts remains as-is while everything else in
sys/boot relocates to stand/.

r325834: Move sys/boot to stand. Fix all references to new location

r325997: Remove empty directories.

r326502: Document the sys/boot -> stand move in hier.7 and the top-level README.

MFC Loader Fixes 2017q4p6: r324649,r324650,r324651,r324652,r324653,r324654,
r324700,r324702,r324709,r324717,r324719,r324841,r324842,r324843,r324845,
r324850,r324876,r324877,r324878,r324879,r324880,r324881,r324883,r324980,
r324981,r324982,r324995,r325014,r325093,r325094,r325114,r325170,r325171,
r325172,r325173,r325174,r325175,r325176,r325248,r325286,r325310,r325332,
r325338,r325339,r325376,r325377,r325379,r325380,r325382,r325478,r325479,
r325480,r325482,r325483,r325484,r325485,r325556,r325641,r325681,r325685,
r325686,r325687,r325688,r325689,r325690,r325691,r325692,r325693,r325694,
r325743,r325744,r325748,r325775,r325779,r325780

r324649: Move common/Makefile.inc to sys/boot/loader.mk.

r324650: tweak style

r324651: create defs.mk for common definitions

r324652: Move all the ficl common code into ficl.mk

r324653: LOADER_foo_SUPPORTED

r324654: Explicitly inlcude SYSDIR in the include path

r324700: loader: initialize dv_cleanup in md.c to eliminate clang warning

r324702: We need to include disk.o in libuboot.a when we're building with
support for disk access.

r324709: Revert "Unify boot1 with loader" change r324646

r324717: libsa/ip.c: misplaced comment, ip_v is half char, not ip_p

r324719: libsa/ip: stop read loop on bad fragments

r324841: Use BOOTDIR more consistently in defs.mk rather than repeat
sys/boot.

r324842: Introduce BOOTOBJ: The top level object directory for the boot tree

r324843: Stopgap fix to the mistmatch between LOADER_GELI_SUPPORT and
LOADER_NO_GELI_SUPPORT.

r324845: Use BOOTOBJ and BOOTDIR to find geli includes and libraries.

r324850: Define LIBSA32 to LIBSA on i386 to fix build.

r324876: Move fdt and uboot defines into common uboot.mk.

r324877: End source directories with SRC rather than a hodgepodge of names

r324878: Make at91 boot loader compile again.

r324879: Prefer SRCTOP paths for bits we're grabbing from libc.

r324880: Use BOOTSRC here.

r324881: Use SYSDIR instead of ${.CURDIR}/../..<etc>/sys.

r324883: Use preferred defined paths, rather than relative paths in fdt.

r324980: Use BOOTDIR consistently.

r324981: Move BINDIR definition to defs.mk, and override where it isn't
/boot

r324982: Remove sys/boot/arm/at91 and ixp425

r324995: loader.efi: Make framebuffer commands available for arm64

r325014: Add a 'place holder' arm struct efi_fb until a real one comes

r325093: Define new EFI variables

r325094: Cleanup non-arch Makefiles

r325114: Use defs.mk defins in most MD code

r325170: Use defs.mk values for userboot

r325171: Use defs.mk name and prefer bsd.init.mk

r325172: Remove the -nostdlib stuff I added. Instead, fix LDFLAGS to be
honored correctly with the new Makefile.inc include order.

r325173: We don't need to build a special ficl for userboot.

r325174: Minor cleanup

r325175: For amd64, compile both zfs and zfs32 libraries.

r325176: Actually add zfs32/Makefile

r325248: loader ptblread() is broken with >512B sectors

r325286: efipart_strategy is using wrong offset with >512B sectors

r325310: zfs.c:vdev_read() needs to be careful about large sectors

r325332: loader: re-enable gzip support for x86

r325338: loader: fix BOOTSRC -> BOOTOBJ in a library path

r325339: This used to have bzip2 support too.

r325376: WIP: centralize machine links

r325377: mostly libsa

r325379: Revert "mostly libsa"

r325380: Revert "WIP: centralize machine links"

r325382: Cleanup stray libstand names to be libsa names.

r325478: Powerpc is a 32-bit boot loader.

r325479: Define LIBFICL32 to be libficl.a on i386 and libficl32.a on amd64.

r325480: Use DO32 for all the places that we need to flag we're building a
32-bit version of a library.

r325482: Move machine and other link creation to defs.mk

r325483: MACHINE can never be powerpc64, so cleanup code that thinks it can.

r325484: Prefer bsd.init.mk to src.opts.mk

r325485: Centralize all 32-bit builds on 64-bit platform stuff.

r325556: loader: set options before including bsd.init.mk

r325641: loader.efi: efi_devpath_is_prefix should return bool

r325681: boot1: avoid using NULL device path

r325685: libsa32 isn't needed for i386. It's already a 32-bit platform.

r325686: Simplify this if to a direct assignment.

r325687: Remove all the empty help files from the powerpc build.

r325688: FDT support doesn't make sense for ps3, remove it.

r325689: Remove LOADER_FDT_SUPPORT as a Makefile variable.

r325690: Remove LOADER_ZFS_SUPPORT as a Makefile variable

r325691: Remove useless PNP define here.

r325692: Replace LOADER_FIREWIRE_SUPPORT variable

r325693: Move LOADER_{NO,}_GELI_SUPPORT to MK_LOADER_GELI

r325694: Install the 4th files in sys/boot/forth instead of each loader

r325743: Make sure the proper loader.rc gets installed.

r325744: boot1: also check for NULL device

r325748: Use proper include file.

r325775: Add loader.conf to the list of files that are MD.

r325779: Add /boot/dts to the list of default modules.

r325780: Don't add /boot/dt*s* but /boot/dt*b*. Stupid think-o.

MFC Loader Fixes 2017q4p3: r324460,r324471

r324460: Rather than laying whack-a-mole with including the path to stand.h,
always include it.

r324471: Fix typos: `stand alon{e,g}` should be spelled like `standalone`

MFC Loader Fixes 2017q4p1: r324321,r324359,r324360,r324388,r324449,r324450,
r324451,r324452

r324321: This README file was quite relevant for FreeBSD 3 or 4. No more.

r324359: Add efi_devpath_is_prefix

r324360: Encapsulate ZFS preferences into efi_zfs_is_preferred

r324388: Unbreak building efiboot with MK_ZFS == no

r324449: Prefer ${LIBSTAND} to -lstand

r324450: Define SASRC and use it

r324451: Add missing -I${SASRC} in a couple of places so that stand.h
doesn't accidentally come in via host pollution.

r324452: Define LIBSA* and use them instead of overloaded LIBSTAND

MFC Loader Fixes 2017q2: r316437,r316577,r316578,r316585,r316590,r316612,
r316625,r316628,r316654,r316682,r316704,r316771,r317092,r317097,r317099,
r317652,r317785,r317886,r317887,r318142,r318320,r318356,r318678,r318754,
r318982,r318986,r318987,r318988,r318989,r318990,r318991,r318992,r318993,
r318994,r318999,r319083,r319084,r319085,r320011,r320234,r320288,r320304,
r320467,r320482

r316437: Small cleanup to make i386/loader match efi/loader boot environment
code

r316577: loader: part.c cstyle cleanup

r316578: loader: want mechanism to avoid RA with bcache

r316585: loader: zfs reader should check all labels

r316590: libstand/dosfs: cache FAT32 in 128 Kb blocks to save loader memory

r316612: In r298230 the value of HEAP_MIN was changed from 3MB to 64MB.
Correct a comment.

r316625: Do not use -msoft-float with intention of disabling FP on aarch64

r316628: Silence GCC warning by initializing the local variable.

r316654: loader: r316585 did miss userboot update

r316682: loader: r316585 did miss sparc/ofw

r316704: loader.efi: only fetch zfs pool guid for the actual boot device

r316771: loader: Avoid possible overflow via environment variable

r317092: loader: zfs reader vdev_probe should check for minimum device size

r317097: loader: F_READ/F_WRITE should be checked against masked flag

r317099: loader: uboot disk ioctl should call disk_ioctl

r317652: loader.efi: ResetSystem does not use data with EFI_SUCCESS

r317785: zfsboot: drvsize() may be unusable on some systems

r317886: distinguish NFS versus TFTP boot by rootpath

r317887: loader: network read rework

r318142: libstand: NULL pointer dereference in rarp

r318320: loader: add ip layer code into libstand

r318356: libstand: increase nfs max read size to 16k

r318678: Replacing iterating over rootpath by strsep(3).

r318754: Pass -N directly to ld via -Wl rather than passing it to the
compiler driver.

r318982: Pass a "FREEBSD" user-class in PXE dhcp request

r318986: add a comment on vendor index 19 and 20 to avoid confusion

r318987: Support URI scheme for root-path in netbooting

r318988: Always build tftpfs support along with nfs for pxeboot

r318989: Always issue the pxe request

r318990: Partially revert r314948

r318991: Document recent changes on pxeboot

r318992: Capitalize DHCP

r318993: Use the usual FreeBSD spelling for the DHCP user class

r318994: Catch with the change in the user class

r318999: Update the comments concerning net_parse_rootpath to reflect what
it is now

r319083: Followup on the user-class changes

r319084: Small cleanup in dev_net.c

r319085: use the same option list for dhcp discovery and request

r320011: Add chain loader support for loader

r320234: Make structure padding explicit in EFI_MEMORY_DESCRIPTOR

r320288: Allow Clang's integrated assembler to assemble boot0

r320304: loader.efi: Disable smbios for arm

r320467: loader: chain load relocate data declaration is bad

r320482: As with arm64 mark the EFI PE header as allocated on arm.

PR: 218473

MFC r303555,r303556,r303936,r303962,r304317,r304532,r305026,r305107,r305132,
r305178,r305353,r305814,r306159,r306380,r306504: Loader fixes, 2016q3

r303555: bcache should support reads shorter than sector size

r303556: Improve boot loader quote parsing

r303936: Add kernel environment variables under smbios.system

r303962: Add the missing space between .asciz directive and opening quote
for some lines with #ifdef BTXLDR_VERBOSE/#endif

r304317: boot1.efi Free() should check for NULL to provide consistent
behavior

r304532: Replace sprintf -> snprintf for command_errbuf provisioned from
dynamic content.

r305026: Emulate efi_cons_poll when WaitForKey is not available

r305107: Create a hook 'post-initialize' for people that want to define
something to read in .conf files after all other .conf files for the purpose
of overriding.

r305132: Remove accidentally committed stray comment.

r305178: bd_int13probe() should check extended info if sector info is bad

r305353: Don't use -N to set the OMAGIC with data and text writeable and
data not page aligned.

r305814: ufsread: Do not cast struct direct from void *

r306159: Consistently declare getsecs(void) with proper return type and void
when no arguments are present.

r306380: loader command interpreter should reset command_errmsg

r306504: Fix a cluster of bugs in list EFI environment variables

PR: 204602, 211958, 211958
Relnotes: yes ("Improve boot loader quote parsing")

MFC r308434, 308827

MFC r308434: Loader paged/pageable data is not always paged.
MFC r308827: lsdev device name section headers should be printed by dv_print
callback.

MFC r313982, r314068:
sys: Replace zero with NULL for pointers.

Found with: devel/coccinelle

MFC r309369,310850,310853:

libstand: dosfs cstyle cleanup for return keyword.
dosfs support in libstand is broken since r298230

PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Approved by: imp (mentor)

MFC r310225: Reduce boot loader version string duplication

Instead of repeating "%s, Revision %s" "(%s %s)" in each loader, just
create the full version string in vers.c

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

sys/boot: spelling fixes in comments.

No functional change.

A new implementation of the loader block cache

The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.

Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.

Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713

Add more .NOMETA missed in r291320

Sponsored by: EMC / Isilon Storage Division

Allow loader to load 64-bit ELFv2 PowerPC kernels.

Provide a shim layer in loader to condense the Open Firmware device tree to
an FDT. This is how Linux and OS X boot and can avoid some issues with
using Open Firmware at runtime. The code is highly experimental and disabled
by default; it can be turned on by setting the loader environment variable
"usefdt" to a non-NULL value.

Give loaders more control over the Forth initialization process. In
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.

The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf

When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.

Obtained from: Juniper Networks, Inc.

Fix panics on attempt to dereference uninitizlized pointer, returned via
'path' argument of ofw_parsedev() if devspec refers raw device with no path.

For example, `ls /pci@1f,0/ide@d/disk@0,0:a/` works fine, while
`ls /pci@1f,0/ide@d/disk@0,0:a` panicked before this change.

The workaround added in r151650 for handling firmwares that don't allow
a single device to be opened multiple times concurrently unfortunately
isn't sufficient with ZFS. This is due to the fact, that ZFS may open
different partitions of a single device simultaneously. So the best we
can do in this case is to cache the lastly used device path and close
and open devices in ofwd_strategy() as needed.

PR: 165025
Submitted by: Gavin Mu
MFC after: 1 week

sparc64/zfs boot: take advantage of new libzfsboot capabilities

Also drop the now unneeded compatibility shims.

Tested by: marius
MFC after: 1 month

Add initial support for booting from ZFS on sparc64. At least on Sun Fire
V100, the firmware is known to be broken and not allowing to simultaneously
open disk devices, causing attempts to boot from a mirror or RAIDZ to cause
a crash. This will be worked around later. The firmwares of newer sun4u models
don't seem to exhibit this problem though.

Steps for ZFS booting:

1. create VTOC8 label
# gpart create -s vtoc8 da0

2. add partitions, f.e.:
# gpart add -t freebsd-zfs -s 60g da0
# gpart add -t freebsd-swap da0
resulting in something like:
# gpart show
=> 0 143331930 da0 VTOC8 (68G)
0 125821080 1 freebsd-zfs (60G)
125821080 17510850 2 freebsd-swap (8.4G)

3. create zpool
# zpool create bunker da0a
or for mirror/RAIDZ (after preparing additional disks as in steps 1. + 2.):
# zpool create bunker mirror da0a da1a
# zpool create bunker raidz da0a da1a da2a ...

4. set bootfs
# zpool set bootfs=bunker bunker

5. install zfsboot
# zpool export bunker
# gpart bootcode -p /boot/zfsboot da0

6. write zfsloader to the ZFS Boot Block (so far, there's no dedicated tool
for this, so dd(1) has to be used for this purpose)
When using mirror/RAIDZ, step 4. and the dd(1) invocation should be repeated
for the additional disks in order to be able to boot from another disk in
case of failure.
# sysctl kern.geom.debugflags=0x10
# dd if=/boot/zfsloader of=/dev/da0a bs=512 oseek=1024 conv=notrunc
# zpool import bunker

7. install system on ZFS filesystem
Don't forget to set 'zfs_load="YES"' and vfs.root.mountfrom="zfs:bunker" in
loader.conf as well as 'zfs_enable="YES"'in rc.conf.

8. copy zpool.cache to the ZFS filesystem
cp -p /boot/zfs/zpool.cache /bunker/boot/zfs/zpool.cache

9. set mountpoint
# zfs set mountpoint=/ bunker

10. Now, given that aliases for all disks in the zpool exists (check with
the `devalias` command on the boot monitor prompt) and disk0 corresponds
to da0 (likewise for additional disks), the system can be booted from the
ZFS with:
{1} ok boot disk0

PR: 165025
Submitted by: Gavin Mu

Replace index() and rindex() calls with strchr() and strrchr().

The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.

This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.

Rename the linker emulation name for powerpc and powerc64. This is needed that
we can also use the upstream binutils linker where we have to have a unique
name for the FreeBSD emulation.

Check the OF_getprop() return value before proceeding. Allocate only as
much space as needed for the mode buffer. Use strcmp, relying on OF giving
back NULL terminated strings.

Submitted by: marius
Approved by: nwhitehorn (mentor)

Check the real-mode? OF property to find out whether we operate in real or
virtual mode. In virtual mode we have to do memory mapping. On PowerMacs it is
usually false while on pSeries we have found that it is true. The real-mode?
property is not available on sparc64.

Approved by: nwhitehorn (mentor)

Move the declaration of the eh struct (used only when debugging is enabled)
from ofwn_put into the debug section.

Approved by: nwhitehorn (mentor)

Fix the printf() in init_heap so that it can run before the console is up.

Pointed out by: marius

Fix netboot on some Apple machines on which calling dma-free on the
network device can hang the machine. This causes the loss of 64 KB of
accessible memory on netbooted machines.

Fix some memory management issues discovered when trying to boot the PPC
OF loader on systems where address cells and size cells are both 2 (the
Mambo simulator) and fix an error where cons_probe() was called before
init_heap() but used malloc() to set environment variables.

MFC after: 1 month

In the case of non-sequential mappings, ofw_mapmem() could ask Open
Firmware to map a memory region with negative length, causing crashes
and Undefined Behavior. Add the appropriate check to make the behavior
defined.

MF tbemd: Minor tweaks, prefer MACHINE_CPUARCH generally to MACHINE_ARCH (which simplifies some powerpc/powerpc64 ifs)

Provide support in loader for booting 64-bit PowerPC kernels. Like amd64,
64-bit PowerPC kernels are loaded by a 32-bit loader, since nearly all
powerpc64 firmwares execute in 32-bit mode.

(S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.

PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month

Don't close OF disk devices on PowerPC. This fixes loader when booting from
disk on my Blue & White G3 system.

Backout rev 183181. It appears that I should have been using boot-device
of "cd:,\\:tbxi" with properly configured boot.tbxi, instead of booting
\boot\loader directly. Rev 183168 could probably stay, since it can be
viewed as an anti-foot-shooting measure and has no impact on normal
operation. I can revert it as well, if anybody objects.

On PowerPC send output to both "/chosen/stdout" and "screen" nodes, unless
they point to the very same device. This should make loader usable on
some (all?) PowerMacs, where "/chosen/stdout" is disconneted from the
"screen" by the OF init process by default, except when user actually
has requested interaction with OF by holding ALT-CMD-O-F. Along with
rev 183168 this should provide a way to build bootable FreeBSD/ppc
installation or live CD that works OOB. Also, it should bring PowerMac
experience closer to that on other arches.

MFC after: 1 week
(assiming re@ blessing)

Enable GCC stack protection (aka Propolice) for userland:
- It is opt-out for now so as to give it maximum testing, but it may be
turned opt-in for stable branches depending on the consensus. You
can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
It is harmless to steal the knob as SSP symbols have been provided
by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
(sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
libc will be automatically downgraded to -fstack-protector because it
breaks rtld otherwise.
- This option is unavailable on ia64.

Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.

Submitted by: Jeremie Le Hen <jeremie@le-hen.org>

Make the openfirmware getchar entry point non-blocking. This catches up
with jhb's 2005/05/27 loader multiple-console change.

Tested by: marius/sparc64, grehan/ofwppc

- Make better use of the global chosen, memory and mmu handles instead
of obtaining them over and over again and pretending we could do
anything useful without them (for chosen this includes adding a
declaration and initializing it in OF_init()).
- In OF_init() if obtaining the memory or mmu handle fails just call
OF_exit() instead of panic() as the loader hasn't initialized the
console at these early stages yet and trying to print out something
causes a hang. With OF_exit() one at least has a change to get back
to the OFW boot monitor and debug the problem.
- Fix OF_call_method() on 64-bit machines (this is a merge of
sys/dev/ofw/openfirm.c rev 1.6).
- Replace OF_alloc_phys(), OF_claim_virt(), OF_map_phys() and
OF_release_phys() in the MI part of the loader with wrappers around
OF_call_method() in the sparc64. Beside the fact that they duplicate
OF_call_method() the formers should never have been in the MI part
of the loader as contrary to the OFW spec they use two-cell physical
addresses.
- Remove unused functions which are also MD dupes of OF_call_method().
- In sys/boot/sparc64/loader/main.c add __func__ to panic strings as
different functions use otherwise identical panic strings and make
some of the panic strings a tad more user-friendly instead of just
mentioning the name of the function that returned an unexpected
result.

Sync the styles of sys/boot/ofw/libofw/openfirm.c and
sys/dev/ofw/openfirm.c with themselves, with each-other
and with style(9).

Extend struct devdesc with a unit field, called d_unit. Promote the
device (kind) specific unit field to the common field. This change
allows a future version of libefi to work without requiring anything
more than what is defined in struct devdesc and as such makes it
possible to compile said version of libefi for different platforms
without requiring that those platforms have identical derivatives
of struct devdesc.

Don't unconditionally compile-in the bcache code. It's only used on
i386/amd64 and pc98. Remove useless calls to bcache_init() from the
ia64 and sparc64 loaders, as well as from the OFW common code.

more sun4v fallout - missed add
Approved by: rwatson (mentor)

add sun4v support to the sparc64 boot loader

Approved by: rwatson (mentor)
Reviewed by: jmg
Tested by: kris, dwhite, and jmg

- Add a workaround for the fact that OFW doesn't guarantee that
devices can be opened multiple times simultaneously but we're
expected to be able to do so by the rest of the loader.
This fixes booting from disks attached to the on-board SCSI
controller of Sun Ultra 1 (previously this triggered a trap)
and probably also of AX1115 boards.
- While here, remove unused variables and add empty lines where
style(9) requires such.

Tested on: powerpc (grehan), sparc64
MFC after: 1 month

In ofw_parsedev() check the return value of malloc() and protect
against a NULL pointer dereference when ofw_parsedev() is called
with a NULL path argument.

Tested on: powerpc (grehan), sparc64

Use an ihandle_t to store the instance handle of an opened device
instead of a phandle_t (package handle). Since both are typedefed
to unsigned int, this is more or less cosmetic.

Remove unused variables.

Make code match comment: make the smallest unit of page allocation
from OpenFirmware be 16 pages to avoid fragmentation in the list
of mappings returned when the kernel requests it in pmap_bootstrap.

This allows a static buffer to be used when obtaining the existing
mappings - very useful on the G5 when random physical pages can't
be grabbed because they can't be BAT-mapped.

MFC after: 3 days

Since the BAT mapping was removed a long time back, it can't
be assumed that modules are contiguous in memory (they're not)
so don't blindly __syncicache start/end. In fact, don't bother
syncing the icache for modules since the kernel will do it after
fixing up relocations.

This fixes the trap when loading modules at boot time.

Reported by: orlando at break dot net

Change ofw_readin/ofw_copyin to map the entire region before
copying, rather than a page at a time. This was creating far
too many single-page mappings, and eventually OFW overflowed
some internal data structure and refused to map any more.
The new algorithm creates far less mappings and fixed a bug
where multiple mappings for the same page would be created.

'Twas known this was a problem, but only became urgent when the
install CD's mfs_root grew large enough to cause the overflow.

Remove unused variables.

Start each of the license/copyright comments with /*-

For variables that are only checked with defined(), don't provide
any fake value.

Instead of "OpenFirmware", "openfirmware", etc. use the official spelling
"Open Firmware" from IEEE 1275 and OpenFirmware.org (no pun intended).

Ok'ed by: tmm

G5 support: handle the case where the OpenFirmware memory array uses
64 bits for the phys address, but only 32 for the virtual address.

All hell breaks loose if the loader image is released before
jumping to the kernel. Another bug exposed by removing the
1:1 BAT mapping. Sparc64 doesn't do this either.

Compile tested on: panther (sparc64). Code built, but not used, on sparc64.

Correctly calculate size of memory to be mapped when copying. Removal
of the 256Mb 1:1 BAT mapping exposed this as copying into memory that
hadn't been claimed from OpenFirmware.

compiled-tested on: panther (sparc64). Code built, but not used, on sparc64

Extract entry point from elf header before releasing the heap.
This caused a data-miss trap when the BAT init code was removed
on PPC.

Compile tested on: panther (sparc64). Code built, but not used, on sparc64.

Convert to __FBSDID.

- Add ':' as a separator between the OpenFirmware device space and
the file path. Commonly used on Macs e.g. "hd:9".
- Update the ofw_setcurrdev routine to match libstand setenv prototype

Not objected to by: sparc64

Make __elfN(ofw_loadfile) match parameter declaration for file_format
in boot/common/bootstrap.h. Having a 32-bit size when a 64-bit param
is declared wreaks havoc on PPC.

Not objected to by: sparc64

Only print out an error if returned data size is < 0. A value of 0
happens almost every time at the end of a file when using NFS.

No objection by: sparc64

Use daddr_t instead of u_long for byte offset in strategy
routine to avoid >4G truncation on 32-bit systems.

no objection by: sparc64

- use correct pointer arithmetic in heapsize calculation
- handle multiple Ofw memory regions when determining mem size
- allow currdev to be set as a loader command-line option.
parse() is used to allow future options to be processed.

Enable the i386 loader to load and run an amd64 kernel. If this puts
things over floppy size limits, I can exclude it for release builds or
something like that. Most of the changes are to get the load_elf.c file
into a seperate elf32_ or elf64_ namespace so that you can have two
ELF loaders present at once. Note that for 64 bit kernels, it actually
starts up the kernel already in 64 bit mode with paging enabled. This
is really easy because we have a known minimum feature set.

Of note is that for amd64, we have to pass in the bios int 15 0xe821
memory map because once in long mode, you absolutely cannot make VM86
calls. amd64 does not use 'struct bootinfo' at all. It is a pure loader
metadata startup, just like sparc64 and powerpc. Much of the
infrastructure to support this was adapted from sparc64.

Cut&Paste considered far too easy:

Don't include <sys/disklabel.h>

Fix a dumb bug that broke net booting on sparc64. The wrong length was
passed to strncmp.

Noticed by: tmm
Approved by: re
Pointy hat to: jake

Change the device path representation in libofw to use the full firmware
path, instead of an internal i386 specific one. Don't try to interpret
a disklabel in ofw_disk.c, open the partition's device node directly and
let the firmware do it. This fixes booting from a partition other than 'a'
on sparc64, which is needed to support more installation methods.

No objection: ppc

Major rework of how we copy data into kernel space.

We now talk to the memory and mmu instances directly rather than using the
OpenFirmware "claim" method.

Add support for passing metadata.

Fix up the DMA buffer allocation call.

Removed now unused INTERNALSTATICLIB.
INTERNALLIB now implies NOPIC and NOPROFILE.
Removed gratuitous NOMAN.

Back out last commit. I expect our bsd.*.mk gods to remove the need for
defining so many extra things in addition to INTERNALLIB. We don't like
repetitive C code and we shouldn't for make code either.

Change the disk probing so that it will actually find disks other
than the first one on a controller, and work for secondary
controllers.
Due to the prom not having nodes for each disk, but a catch-all one,
we have to iterate over each device, trying to open it to determine
whether it is actually present.
Since probing this way takese some time (and spews some spurious
warnings), it should maybe be short-circuited if we use the
device we were booted from.
Implement lazy device probing, and correct slice/partiniton
handling in the ofwd_open() code. With this, I can now actually boot
a kernel from disk, and the loader does not create unnecessary
delays.

Submitted by: tmm

NOPIC, NOPROFILE, NOMAN, and INTERNALSTATICLIB are redundant when using
INTERNALLIB now.

Add -ffreestanding to CFLAGS.

Fix test for != 0 that should be > 0.

Check the return values of index() and don't dereference it if its null;
the path may not have a ':' in it. The mac address property is called
mac-address for sparc64. Don't allocate a dma buffer for sparc64 either.

#if 0 more bootinfo stuff.

Add OF_claim_virt() and OF_release_phys().

Submitted by: tmm

- Remove unneeded variable.
- Remove change for my local configuration that slipped in with
the last commit; I am having problems booting when multiple SCSI
disks are attached, so I will change this part as soon as I find
a solution, anyway.

This file is now unneeded.

- Do not include a NetBSD header as it is not needed anymore.
- Remove two constants that were needed in conjuction with the
NetBSD disklabel header. Use the FreeBSD equivalents.
To boot from NetBSD/sparc64 partitions, define LABELOFFSET to
be 128.
- Do not use the complete open firmware path to filter out cdrom drives.
No path containing "cdrom" is detected as a disk now.
- Simplify some code.

Make the openfirmware entry point function pointer non-static so that it
can be passed to the kernel.

Add a prototype for OF_alloc_phys.

Make the ofw_reg structure and ofw_alloc_heap 64-bit save.

Do not include openfirm.h; it is now included by libofw.h.

- Use the cell_t type definition for Open Firmware arguments in
combination with requisite casts as this avoids fatal side
effects on 64-bit architectures.
- Add the OF_alloc_phys function.

- Fill dummy functions with code to read from disk using Open
Firmware.
- Add a temporary disklabel header to boot off a NetBSD/sparc64
partition. This file can be deleted when we have got a FCode
bootblock.

The disklabel header was obtained from NetBSD.

- Include openfirm.h for phandle_t.
- Add some necessary members to the ofwdisk structure.
- Add a prototype for ofw_parseofwdev.

Add a function for parsing an Open Firmware boot path into the
ofw_devdesc structure.

- Add an ifdef guard.
- Use unsigned types for the (32-bit) Open Firmware device handles
to avoid sign extension on 64-bit architectures.
- Add a standard type definition for Open Firmware arguments.

Whitespace fixes.

Add new files needed by previous commit.

Mega-patch for OpenFirmware loader support.

- Flesh out ofw_readin routine.
- Add OpenFirmware load and exec routines.
- Make sure memory allocation for the kernel is done correctly.
- Change the way the heap is allocated so as to make it easier to deallocate
when we hand over.
- Add a command to print memory maps similar to the one for ia64.

With this patch, I can now load and hand over to a kernel on my iMac. There
are some problems with OpenFirmware routines failing after the hand over that
still need to be addressed.

Pass NULL instead of MAXPHYS to the DMA allocation method. Be a bit more
verbose if we fail to allocate the DMA buffer.

OpenFirmware/PowerPC loader, part 2.

As of this patchset, the loader builds (under NetBSD/macppc), boots, interacts
and talks to BOOTP/NFS servers.

(main.c was moved from boot/ofw/libofw to boot/ofw/common but has no revision
history)

Reviewed by: obrien

Convert from the Alpha compontents to PowerPC ones.

"Ok, my loader's now up to putting up a prompt. It probes disks partially
but can't boot from them yet."

Thanks to Stephane Potvin for the some of the code in this set.

Submitted by: Benno Rice <benno@jeamland.net>

Fix the more obvious warnings to deal with my earlier warning cleanups.

$Id$ -> $FreeBSD$

Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition. eisa, isapnp and pccard* are
not yet using the new resource manager. Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
ATA driver to the Alpha. Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by: core

* Add old UFS compatibility code to alpha/boot1.
* Fix a raft of warnings, printf and otherwise.
* Allocate the correct amount in mod_searchmodule to prevent an overflow.
* Fix the makefiles so they work outside my home directory (oops).

Make the alpha bootstrap build again, fix some warning and change sdboot to daboot.

Bootstrap updates.

- Move some startup code from MD to MI sections
- Add a 'copyout' and some copyout-related functions. These will be
obsoleted when BTX is available for the 386 and the kernel load
area becomes directly addressable.
- Add the ability load an arbitrary file as a module, associating
and arbitrary type string with it. This can be used eg. for loading
splash-screen images etc.
- Add KLD module dependancy infrastructure. We know how to look for
dependancies inside KLD modules, how to resolve these dependancies
and what to do if things go wrong. Only works for a.out at the
moment, due to lack of an MI ELF loader. Attach KLD module information
to loaded modules as metadata, but don't pass it to the kernel (it
can find it itself).
- Load a.out KLD modules on a page boundary. Only pad the a.out BSS
for the kernel, as it may want to throw symbols away. (We might want
to do this for KLD modules too.)
- Allow commands to be hidden from the '?' display, to avoid cluttering
it with things like 'echo'. Add 'echo'.
- Bring the 'prompt' command into line with the parser syntax.
- Fix the verbose 'ls'; it was using an uninitialised stack variable.
- Add a '-v' flag to 'lsmod' to have it display module metadata as well
(not terribly useful for the average user)
- Support a 'module searchpath' for required modules.
- The bootstrap file on i386 is now called 'loader' to permit the
/boot directory to use that name.
- Discard the old i386 pread() function, as it's replaced by
arch_readin()

Bootloader update.

- Implement a new copyin/readin interface for loading modules.
This allows the module loaders to become MI, reducing code duplication.
- Simplify the search for an image activator for the loaded kernel.
- Use the common module management code for all module metadata.
- Add an 'unload' command that throws everything away.
- Move the a.out module loader to MI code, add support for a.out
kld modules.

Submitted by: Alpha changes fixed by Doug Rabson <dfr@freebsd.org>

Minor tweaks to track a couple of i386 changes and to make it compile.

This is the new unified bootstrap, sometimes known previously as the
'three-stage' bootstrap.
There are a number of caveats with the code in its current state:
- The i386 bootstrap only supports booting from a floppy.
- The kernel and kld do not yet know how to deal with the extended
information and module summary passed in.
- PnP-based autodetection and demand loading of modules is not implemented.
- i386 ELF kernel loading is not ready yet.
- The i386 bootstrap is loaded via an ugly blockmap.

On the alpha, both net- and disk-booting (SRM console machines only) is
supported. No blockmaps are used by this code.

Obtained from: Parts from the NetBSD/i386 standalone bootstrap.