DIRDEPS_BUILD: Update dependencies.

This is a direct commit since MFCing these changes is impractical.

Sponsored by: Dell EMC Isilon

MFC r317415:

Remove an incorrect MLINK for tree(3) introduced in r310728.

MFC r312452-r312512:

r312452-r312512:

- Use SRCTOP-relative paths to other directories instead of .CURDIR-relative ones

This simplifies pathing in make/displayed output

- Use .CURDIR:H instead of .CURDIR to simplify pathing in output, etc

MFC r310099,r311000,r311002:

r311000:

Fix spelling errors

r311002:

Install bsnmpclient(3) as snmp_client_{init,set_host,set_port}(3)

MFC r310728:

Install {asn1,bsnmpagent,bsnmpclient,bsnmplib}.3 as all of the APIs
they document

Also, alphabetically sort MAN

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove NO_WERROR from libbsnmp/Makefile.inc

This has been compiling without warnings with clang/gcc for a while now

Tested with: clang 3.8.0, gcc 4.2.x, gcc 5.x
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division

Merge the projects/release-pkg branch to head.

This allows packaging the base system with pkg(8), including
but not limited to providing the ability to provide upstream
binary update possibilities for non-tier-1 architectures.

This merge is a requirement of the 11.0-RELEASE, and as such,
thank you to everyone that has tested the project branch.

Documentation in build(7) etc. is still somewhat sparse, but
updates to those parts will follow.

Sponsored by: The FreeBSD Foundation

META MODE: Prefer INSTALL=tools/install.sh to lessen the need for xinstall.host.

This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.

Sponsored by: EMC / Isilon Storage Division

Add META_MODE support.

Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision: D2796
Reviewed by: brooks imp

Fix build with recent binutils

Recent binutils considered the .gnu.warning.symbol section as a fatal error when
run with --fatal-warnings which makes any users of "insecure" functions from
libc failing to build with recent binutils.

Introduce a new macro: LD_FATAL_WARNINGS=no to run ld(1) with
--no-fatal-warnings for the users of "insecure" functions

Differential Revision: https://reviews.freebsd.org/D1320

Convert libraries to use LIBADD
While here reduce a bit overlinking

Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.

Add missing DPADD

Bump shared libraries version numbers in preparation for 9.0.
This time, only libraries which ABI has been changed compared to
stable/8, are bumped.

ABI analysis done by: Gleb Kurtsou
Approved by: re (kensmith)

Unbreak the build by temprorarily not using include directives in
bsnmpd(1)' def files, until bsd.snmpmod.mk & Makefiles are fixed to
pass proper include path flags to gensnmptree.

Bring in a SNMP module that allows configuration of SNMPv3 Notification targets.

Sponsored by: The FreeBSD Foundation
Reviewed by: philip
Approved by: philip

In bsnmpd(1) add support for SNMPv3 message processing model, including message authentication, packet encryption & view-based access control (RFC 3412, 3414, 3415).

Sponsored by: The FreeBSD Foundation
Reviewed by: philip@ (mostly)
Approved by: philip@

Always assign WARNS using ?=

- fix some nearby style bugs
- include Makefile.inc where it makes sense and reduces duplication

Approved by: ed (co-mentor)

Bump the version of all non-symbol-versioned shared libraries in
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.

Reviewed by: kib
Approved by: re (rwatson)

- Bump share library version which were missed in last bump

Reported by: jhb
Discussed with: deischen, des, doubg, harti
Approved by: re (kensmith)

Catch up with the import of bsnmp-1.11. Add a couple of new
configuration flags to CFLAGS and set the WARNS level to 6.

Bump the shared library version number of all libraries that have not
been bumped since RELENG_5.

Reviewed by: ru
Approved by: re (not needed for commit check but in principle...)

Finish repo-copy of lib/libbsnmp/modules to usr.sbin/bsnmpd/modules.
These modules are modules for the daemon, not for the library so
they should be where the daemon is.

who's -> whose

Fixed punctuation in xrefs.

NOATM -> NO_ATM

For variables that are only checked with defined(), don't provide
any fake value.

Delete a .Fn that had no argument and
properly terminate a .Bl with a matching .El

MFC after: 3 days

Link to the build again. The problem was that we need a new
gensnmptree for the .def file to parse. This was fixed in
Makefile.inc1.

Again something bad is happening so comment out the ATM module.

Now, after the import of NgATM-1.1, re-enable the atm module.

Disable the snmp_atm module until the source gets fixed. This will unbreak
this portion of the build.

Link the snmp_atm module to the build unless NOATM is defined.

Now that gensnmptree can read and merge more than one tree make
the rule so that the tree .c and .h files can be produced from several
trees.

A module for bsnmpd(1) that exports a MIB that contains information about
the local ATM interfaces and allows to change some parameters via SNMP.

Add the right CFLAGS to show that we have err.h, getaddrinfo and strlcpy.
Add support.c to the list of source files.

Move libbsnmp.so to /lib so that it is available to atmconfig.
At the moment the only dependency on this library is bsnmpd.

Approved by: silence on re@

Sort SEE ALSO references (in dictionary order, ignoring case).

Mechanically kill hard sentence breaks.

Use a MANFILTER to patch the man pages to point to the right path.

Noted by: phk

Bump the shared library version number for the bsnmp v1.6 import
because of incompatible interface changes.

Put the name of the module first in the list of all .Nm calls with
argument. This makes the output of calling .Nm without an argument
more senseful later on.

Compare with 0 if comparing an integer, not with NULL.

Move the SNMP MIBs and tree definitions from /usr/share/bsnmp to
/usr/share/snmp. This mirrors the use of /usr/local/share/snmp and
makes also more sense when non-bsnmp-specific MIBs go in.

Make NULL a (void*)0 whereever possible, and fix the warnings(-Werror)
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).

There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.

Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".

Tested on: i386 sparc64

Rename the MIBS makefile variable to BMIBS so that it does not conflict
with the environment variable MIBS that is used by net-snmp.

Create the OID and tree files while building the modules and the daemon
instead of creating them by hand and storing them in the CVS tree. Add
gensnmptree to the bootstrap tools (it is used to generated these files).
This simplifies the update procedure.

Submitted by: ru

Style: remove an empty line.

Clean up makefiles.

Reviewed by: harti

Fixed the fatal bug: CFLAGS should be added to, not overridden.
This prevented CPU and optimization flags to be added here.

Replace all uses of the old netgraph constants NG_*LEN by the new
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.

Add an empty definition of the MIBS variable so that the makefile does
not try to use a MIBS definition from the environment.

Submitted by: Joe Marcus Clarke <marcus@marcuscom.com>

The snmp_netgraph module depends on libnetgraph. So add a dependency and
add libnetgraph to the list of prebuilt libraries in the main Makefile.

Reviewed by: ru

Fix the build by adjusting the include directives. The problem was
that the sources use "..." includes to get at include files that
later on reside in an include sub-directory.

Add build infrastructure for libbsnmp and the modules. Add the
netgraph module for the SNMP daemon.