Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add META_MODE support.

Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision: D2796
Reviewed by: brooks imp

Convert kerberos to LIBADD and reduce overlinking of the kerberos binaries and
libraries

Revert r267233 for now. PIE support needs to be reworked.

1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by: kib

In preparation for ASLR [1] support add WITH_PIE to support building with -fPIE.

This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.

Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]

Mark known build failures as NO_PIE for now.

The only known runtime failure was rtld.

[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]

NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.

Fix conflicts after heimdal-1.1 import and add build infrastructure. Import
all non-style changes made by heimdal to our own libgssapi.

Remove _FREEFALL_CONFIG hacks

This is sort of an MFS. Peter made these changes to the RELENG_*
branches but missed HEAD. This patch extends his a little bit,
setting it up via the Makefiles so that adding _FREEFALL_CONFIG
to /etc/make.conf is the only thing needed to cluster-ize things
(current setup also requires overriding CFLAGS).

From Peter's commit to the RELENG_* branches:
> Add the freebsd.org custer's source modifications under #ifdefs to aid
> keeping things in sync. For ksu:
> * install suid-root by default
> * don't fall back to asking for a unix password (ie: be pure kerberos)
> * allow custom user instances for things like www and not just root

The Makefile tweaks will be MFC-ed, the rest is already done.

MFC after: 3 days
Approved by: re (dwhite)

Start the dreaded NOFOO -> NO_FOO conversion.

OK'ed by: core

Introduce the PRECIOUSPROG knob in bsd.prog.mk, similar
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.

Reviewed by: oliver

style.Makefile(5).

OK'ed by: nectar

Overhaul of kerberos5/ makefiles. Most significant changes are:

- Dropped support for standalone builds, this was only partially
supported anyway, and required so much magic in makefiles that
made life dangerous (e.g., by using the custom yacc rules).

- Got rid of .OBJDIR in makefiles -- makes building of individual
files possible again.

- Made the .x.c transformations -j safe.

- Reprogrammed LDADD to fix static build of some utilities that
was broken.

- Fixed LDFLAGS and DPADD in the WITH_OPENLDAP case -- positively
affects the contents of .depend files.

- Removed redundant .h's from SRCS, only kept those that are
generated.

- libkrb5/ INCS were bogusly installed again with libgssapi/.

- Made build-tools real tools with their own makefiles in
separate directories. This allows us to properly track
their dependencies, etc.

- Faster build, 21% less of makefile code!

Approved by: nectar
Reviewed by: markm
Silence on: arch

Update build infrastructure for Heimdal 0.6.

Big fixup of the makefiles. Sort out the dependancies so that "make"
without "make depend" works, "make -j N" works, and lists of source
files are made vertical to reduce future diffs.

Fixed "make checkdpadd".

OK'ed by: markm

Post KerberosIV de-orbit: Clean up Kerberos5. We dont need KerberosIV
compatiblity mode anymore. Rename the k5foo utils to kfoo (after
repo-copy).

Kerberos 5 no longer needs -lmd

Approved by: nectar

Turn on the set-user-ID bit for k5su if ENABLE_SUID_K5SU is defined.

Do not install this with set-user-ID bit set. This utility does not
grok the `wheel' group.

Noticed by: jmallett

Milestone #1 in cross-arch make releases.

Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.

Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.

Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).

Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).

In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.

Moved the creation of the "crypto" dist from release.5 to
release.2.

In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.

Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.

Inline createBOOTMFS target.

Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.

Assorted fixes:

Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".

Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.

gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.

release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.

Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.

XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)

Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.

Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>

Update build after import of Heimdal Kerberos 2002/02/17.

Install this SUID root. Heck, it is su, after all.

*Sigh*. What I did without this, I have no idea.