296373 |
04-Mar-2016 |
marius |
- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1 builds. - Update newvers.sh to reflect RC1. - Update __FreeBSD_version to reflect 10.3. - Update default pkg(8) configuration to use the quarterly branch.
Approved by: re (implicit) |
289952 |
25-Oct-2015 |
ngie |
MFC r286367:
Make some debug printf's into DPRINTF's to reduce noise on attach/detach
Differential Revision: https://reviews.freebsd.org/D3306 Reviewed by: loos Sponsored by: EMC / Isilon Storage Division
|
269456 |
03-Aug-2014 |
marcel |
MFC 268986; fix file system corruption by creating as many BIOs as needed to satisfy the original request -- in other words: no short reads.
Obtained from: Juniper Networks, Inc.
|
266220 |
16-May-2014 |
loos |
MFC r260522, r260523, r261439, r261440, r261586, r264504, r264769, r265193, r265194, r265197
r260522: Add the manual page for geom_uncompress(4).
r260523: Build the geom_uncompress(4) module by default.
Fix geom_uncompress(4) module loading. Don't link zlib.c (which is a module itself) directly.
r261439: Remove some unnecessary code. The offsets read from the first block are overwritten a few lines bellow.
r261440: Fix a logic error. Because of this inflateReset() wasn't being called and the output buffer wasn't being cleared between the inflate() calls, producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
r261586: Fix the build with DEBUG enabled. Where possible, fix style(9) issues.
r264504: Make sure not to do I/O for more than MAXPHYS bytes. Doing so can cause problems in our providers, such as a KASSERT in md(4). We can initiate I/O for more than MAXPHYS bytes if we've been given a BIO for MAXPHYS bytes, the blocks from which we're reading couldn't be compressed and we had compression in preceeding blocks resulting in misalignment of the blocks we're trying to read relative to the sector. We're forced to round up the I/O length to make it an multiple of the sector size.
When we detect the condition, we'll reduce the block count and perform a "short" read. In g_uzip_done() we need to consider the original I/O length and stop early if we're about to deflate a block that we didn't read. By using bio_completed in the cloned BIO and not bio_length to check for this, we automatically and gracefully handle short reads that our providers may be doing on top of the short reads we may initiate ourselves.
r264769: Keep geom_uncompress(4) in line with geom_uzip(4), bring in the r264504 fix.
Make sure not to start I/O bigger than MAXPHYS bytes.
r265193: Some style and whitespace fixes. Reduce the difference between geom_uzip(4) and geom_uncompress(4). Now, they produce an almost clean diff(1) output.
Remove a duplicated variable from g_uncompress.c and an unnecessary header from g_uzip.c.
r265194: Actually the FEATURE() macro is defined on sys/sysctl.h.
r265197: Fix a leak in g_uzip_taste(). After retrieve all the block offsets from the uzip image, free the last data read.
|
256281 |
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
239790 |
28-Aug-2012 |
ed |
Remove unneeded G_PF_CANDELETE flag.
This flag is only used by GEOM so it can be propagated to the character device's SI_CANDELETE. Unfortunately, SI_CANDELETE seems to do nothing.
|
238198 |
07-Jul-2012 |
trasz |
Fix orphan() methods of several GEOM classes to not assume that there is an error set on the provider. With GEOM resizing, class can become orphaned when it doesn't implement resize() method and the provider size decreases.
Reviewed by: mav Sponsored by: FreeBSD Foundation
|
227293 |
07-Nov-2011 |
ed |
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
|
219029 |
25-Feb-2011 |
netchild |
Add some FEATURE macros for various GEOM classes.
No FreeBSD version bump, the userland application to query the features will be committed last and can serve as an indication of the availablility if needed.
Sponsored by: Google Summer of Code 2010 Submitted by: kibab Reviewed by: silence on geom@ during 2 weeks X-MFC after: to be determined in last commit with code from this project
|
201645 |
06-Jan-2010 |
mav |
Change the way in which zero stripesize is handled. Instead of reporting zero stripeoffset in such case (as if device has no stripes), report offset from the beginning of the media (as if device has single infinite stripe).
This gives partitioning tools information, required to guess better partition alignment, in case if hardware doesn't report it's stripe size. For example, it should give disklabel info about odd offset made by fdisk.
|
197898 |
09-Oct-2009 |
pjd |
If provider is open for writing when we taste it, skip it for classes that depend on on-disk metadata. This was we won't attach to providers that are used by other classes. For example we don't want to configure partitions on da0 if it is part of gmirror, what we really want is partitions on mirror/foo.
During regular work it works like this: if provider is open for writing a class receives the spoiled event from GEOM and detaches, once provider is closed the taste event is send again and class can rediscover its metadata if it is still there. This doesn't work that way when new class arrives, because GEOM gives all existing providers for it to taste, also those open for writing. Classes have to decided on their own if they want to deal with such providers (eg. geom_dev) or not (classes modified by this commit).
Reported by: des, Oliver Lehmann <lehmann@ans-netz.de> Tested by: des, Oliver Lehmann <lehmann@ans-netz.de> Discussed with: phk, marcel Reviewed by: marcel MFC after: 3 days
|
168999 |
24-Apr-2007 |
simokawa |
If compressed length is zero, return a zero-filled block.
MFC after: 1 week
|
168445 |
07-Apr-2007 |
simokawa |
Fix a bug for over 4GB media.
MFC after: 3 days
|
154686 |
22-Jan-2006 |
fjoe |
Rename geom_uzip class to g_uzip in order to be consistent with the naming of other GEOM modules.
PR: 89998
|
154540 |
18-Jan-2006 |
pjd |
Fix bio leak in case of malloc(9) failure.
Found by: Coverity Prevent(tm) Coverity ID: CID794 MFC after: 3 days
|
152971 |
30-Nov-2005 |
sobomax |
Don't pass error value pointer to g_read_data(9) at all if we don't have any use of it.
Suggested by: pjd
|
152967 |
30-Nov-2005 |
sobomax |
Check for g_read_data(9) errors properly:
o The only indication of error condition is NULL value returned by the function;
o value pointed to by error argument is undefined in the case when operation completes successfully.
Discussed with: phk
|
151897 |
31-Oct-2005 |
rwatson |
Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories, attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to finish this conversion. Similar changes are required for UMA zone names.
|
150735 |
29-Sep-2005 |
fjoe |
- Fix "end_blk out of range" panic when INVARIANTS. - Do not allow rw access.
Submitted by: Dario Freni <saturnero at freesbie dot org> MFC after: 3 days
|
137936 |
20-Nov-2004 |
fjoe |
Use M_ZERO to not panic in mtx_init when INVARIANTS enabled.
Submitted by: simokawa MFC after: 1 week
|
135461 |
19-Sep-2004 |
fjoe |
Use correct malloc type when freeing memory allocated by g_read_data.
PR: 71431 Submitted by: daichi
|
134958 |
08-Sep-2004 |
fjoe |
Do not compile in zlib.c. Add a dependency on module instead.
|
133640 |
13-Aug-2004 |
fjoe |
Add geom_uzip -- geom class that implements read-only compressed disks. Currently supports cloop V2.0 disk compression format. May support more formats in future.
|