Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Merge r259855: We have in base iconv.

PR: 185135

Hoist all the mergeinfo up to the root in preparation for enforcing merges
to the root only. All MFC's were rerecorded to the root.

Going forward, if an MFC includes mergeinfo, it will need to be made to
the root and committed from the root. Merges with --ignore-ancestry
or diff | patch can go anywhere.

The mergeinfo in HEAD is in a bad state from years of neglect and manual
tampering and this was branched into 10.x. This confuses the coalescing
code and prevents it from doing its job.

Approved by: re (gjb, implicit)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Improve compatibility with recent flex from flex.sourceforge.net.

remove redundant yyparse declarations

PR: conf/174079
Submitted by: Garrett Cooper <yanegomi@gmail.com>

Add a missing check for fread

Approved by: cperciva
MFC after: 3 days

Minor spelling fixes.

Use NO_WCAST_ALIGN for usr.sbin/ndiscvt; because this is only built for
x86, any alignment warnings can be safely ignored. Define YY_NO_INPUT
in usr.sbin/ndiscvt/inf-token.l, so no unused lex functions are defined.

MFC after: 1 week

With retirement of cpumask_t and usage of cpuset_t for representing a
mask of CPUs, pc_other_cpus and pc_cpumask become highly inefficient.

Remove them and replace their usage with custom pc_cpuid magic (as,
atm, pc_cpumask can be easilly represented by (1 << pc_cpuid) and
pc_other_cpus by (all_cpus & ~(1 << pc_cpuid))).

This change is not targeted for MFC because of struct pcpu members
removal and dependency by cpumask_t retirement.

MD review by: marcel, marius, alc
Tested by: pluknet
MD testing by: marcel, marius, gonzo, andreast

etire the cpumask_t type and replace it with cpuset_t usage.

This is intended to fix the bug where cpu mask objects are
capped to 32. MAXCPU, then, can now arbitrarely bumped to whatever
value. Anyway, as long as several structures in the kernel are
statically allocated and sized as MAXCPU, it is suggested to keep it
as low as possible for the time being.

Technical notes on this commit itself:
- More functions to handle with cpuset_t objects are introduced.
The most notable are cpusetobj_ffs() (which calculates a ffs(3)
for a cpuset_t object), cpusetobj_strprint() (which prepares a string
representing a cpuset_t object) and cpusetobj_strscan() (which
creates a valid cpuset_t starting from a string representation).
- pc_cpumask and pc_other_cpus are target to be removed soon.
With the moving from cpumask_t to cpuset_t they are now inefficient
and not really useful. Anyway, for the time being, please note that
access to pcpu datas is protected by sched_pin() in order to avoid
migrating the CPU while reading more than one (possible) word
- Please note that size of cpuset_t objects may differ between kernel
and userland. While this is not directly related to the patch itself,
it is good to understand that concept and possibly use the patch
as a reference on how to deal with cpuset_t objects in userland, when
accessing kernland members.
- KTR_CPUMASK is changed and now is represented through a string, to be
set as the example reported in NOTES.

Please additively note that no MAXCPU is bumped in this patch, but
private testing has been done until to MAXCPU=128 on a real 8x8x2(htt)
machine (amd64).

Please note that the FreeBSD version is not yet bumped because of
the upcoming pcpu changes. However, note that this patch is not
targeted for MFC.

People to thank for the time spent on this patch:
- sbruno, pluknet and Nicholas Esborn (nick AT desert DOT net) tested
several revision of the patches and really helped in improving
stability of this work.
- marius fixed several bugs in the sparc64 implementation and reviewed
patches related to ktr.
- jeff and jhb discussed the basic approach followed.
- kib and marcel made targeted review on some specific part of the
patch.
- marius, art, nwhitehorn and andreast reviewed MD specific part of
the patch.
- marius, andreast, gonzo, nwhitehorn and jceel tested MD specific
implementations of the patch.
- Other people have made contributions on other patches that have been
already committed and have been listed separately.

Companies that should be mentioned for having participated at several
degrees:
- Yahoo! for having offered the machines used for testing on big
count of CPUs.
- The FreeBSD Foundation for having sponsored my devsummit attendance,
which has been instrumental.
- Sandvine for having offered offices and infrastructure during
development.

(I really hope I didn't forget anyone, if it happened I apologize in
advance).

Merge binutils 2.17.50 to head. This brings a number of improvements to
x86 CPU support, better support for powerpc64, some new directives, and
many other things. Bump __FreeBSD_version, and add a note to UPDATING.

Thanks to the many people that have helped to test this.

Obtained from: projects/binutils-2.17

ANSIfy some more tools in usr.sbin/.

Most of these tools build with WARNS=6, except for their use of K&R
function declarations.

Integrate the NDIS USB support code to CURRENT.

Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:

- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)

All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.

To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.

I expect no changes of the NDIS code for PCI, PCMCIA devices.

Obtained from: //depot/projects/ndisusb/...

remove reference for unexisting ndisapi(9)

handle .INF files for PCMCIA correctly that specify multiple entries in
their [Manufacturer] sections and prevent a case that NDIS_PCI_DEV_TABLE
definition was always emitted that it's only emitted once if a .INF file
is for PCI.

If the .inf file did not have a Default entry for the registry key then write
out a blank value and close the brackets on the ndis_regvals array.

Use a ndis_ prefix on the C variable instead of directly using the .sys
filename, this would fail if the filename started with a number.

PR: bin/84911
Submitted by: Fredrik Lindberg

Remove ndisapi.9 Xref.

PR: 97375

Silence GCC4 signed/unsigned pointer mismatch warning.

Clean up and apply the fix for PR 83477. The calculation for locating
the start of the section headers has to take into account the fact
that the image_nt_header is really variable sized. It happens that
the existing calculation is correct for _most_ production binaries
produced by the Windows DDK, but if we get a binary with oddball
offsets, the PE loader could crash.

Changes from the supplied patch are:

- We don't really need to use the IMAGE_SIZEOF_NT_HEADER() macro when
computing how much of the header to return to callers of
pe_get_optional_header(). While it's important to take the variable
size of the header into account in other calculations, we never
actually look at anything outside the non-variable portion of the
header. This saves callers from having to allocate a variable sized
buffer off the heap (I purposely tried to avoid using malloc()
in subr_pe.c to make it easier to compile in both the -D_KERNEL and
!-D_KERNEL case), and since we're copying into a buffer on the
stack, we always have to copy the same amount of data or else
we'll trash the stack something fierce.

- We need <stddef.h> to get offsetof() in the !-D_KERNEL case.

- ndiscvt.c needs the IMAGE_FIRST_SECTION() macro too, since it does
a little bit of section pre-processing.

PR: kern/83477

Fix all the spelling mistakes I could find in the man pages for words
that have at least 3 characters.

MFC after: 1 week
Thanks to: Music band ``Chingon''
for keeping me company while searching for these.

(More thoroughly) fix the problem with the EGREP lines that was reported
on -current by Ben Kaduk <minimarmot@gmail.com>.

Add a hack of my own to allow the user to supply the paths to the INF and
SYS files on the command line.

Use "FreeBSD/i386" over "FreeBSD/ia32" to avoid any confusion.

Correct some spelling and grammatical errors.

Fix ndisgen(8) for amd64

- file(1) does not recognize UTF-16 encoded .INF file:

netbc564.inf: MPEG ADTS, layer I, v1, 96 kBits, 32 kHz, Stereo

Use egrep(1) to match two strings, i. e., `Signature' and `Class=Net'.

- Fix linking failure. Generate a temporary Makefile to emluate
official kernel module build process.

- Some minor typo/style fixes.

Reviewed by: obrien

Markup fixes.

Approved by: re

Update ndiscvt to handle .INF files that specify multiple entries in
their [Manufacturer] sections.

Fix support for Windows drivers that support both PCI and PCMCIA devices at
the same time.

Fix if_ndis_pccard.c so that it sets sc->ndis_dobj and sc->ndis_regvals.

Correct IMPORT_SFUNC() macros for the READ_PORT_BUFFER_xxx() routines,
which take 3 arguments, not 2.

This fixes it so that the Windows driver for my Cisco Aironet 340 PCMCIA
card works again. (Yes, I know the an(4) driver supports this card natively,
but it's the only PCMCIA device I have with a Windows XP driver.)

Throw the switch on the new driver generation/loading mechanism. From
here on in, if_ndis.ko will be pre-built as a module, and can be built
into a static kernel (though it's not part of GENERIC). Drivers are
created using the new ndisgen(8) script, which uses ndiscvt(8) under
the covers, along with a few other tools. The result is a driver module
that can be kldloaded into the kernel.

A driver with foo.inf and foo.sys files will be converted into
foo_sys.ko (and foo_sys.o, for those who want/need to make static
kernels). This module contains all of the necessary info from the
.INF file and the driver binary image, converted into an ELF module.
You can kldload this module (or add it to /boot/loader.conf) to have
it loaded automatically. Any required firmware files can be bundled
into the module as well (or converted/loaded separately).

Also, add a workaround for a problem in NdisMSleep(). During system
bootstrap (cold == 1), msleep() always returns 0 without actually
sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for
the NIC's firmware to come to life, and fails to load if NdisMSleep()
doesn't actually delay. As a workaround, if msleep() (and hence
ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead).
This is not really the right thing to do, but we can't really do much
else. At the very least, this makes the Intel driver happy.

There are probably other drivers that fail in this way during bootstrap.
Unfortunately, the only workaround for those is to avoid pre-loading
them and kldload them once the system is running instead.

Fix a small bug in firmcvt: outfile must be strdup()ed.
Also, add conditional code to allow different invokations for objcopy
depending on whether we're compiled on an i386 arch or amd64 arch, so
that we can produce x86-64 object files on amd64.

Re-staticize a few functions I un-staticized for debugging purposes
on amd64 and accidentally forgot to put back. (Have I mentioned that
gdb on amd64 needs work? It does. Boy howdy.)

Add support for Windows/x86-64 binaries to Project Evil.
Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx)
deserves a big thanks for submitting initial patches to make it
work. I have mangled his contributions appropriately.

The main gotcha with Windows/x86-64 is that Microsoft uses a different
calling convention than everyone else. The standard ABI requires using
6 registers for argument passing, with other arguments on the stack.
Microsoft uses only 4 registers, and requires the caller to leave room
on the stack for the register arguments incase the callee needs to
spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall
and _fastcall, all routines on Windows/x86-64 uses the same convention.
This unfortunately means that all the functions we export to the
driver require an intermediate translation wrapper. Similarly, we have
to wrap all calls back into the driver binary itself.

The original patches provided macros to wrap every single routine at
compile time, providing a secondary jump table with a customized
wrapper for each exported routine. I decided to use a different approach:
the call wrapper for each function is created from a template at
runtime, and the routine to jump to is patched into the wrapper as
it is created. The subr_pe module has been modified to patch in the
wrapped function instead of the original. (On x86, the wrapping
routine is a no-op.)

There are some minor API differences that had to be accounted for:

- KeAcquireSpinLock() is a real function on amd64, not a macro wrapper
around KfAcquireSpinLock()
- NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole
NDIS_BUFFER API a bit to accomodate this.

Bugs fixed along the way:
- IoAllocateMdl() always returned NULL
- kern_windrv.c:windrv_unload() wasn't releasing private driver object
extensions correctly (found thanks to memguard)

This has only been tested with the driver for the Broadcom 802.11g
chipset, which was the only Windows/x86-64 driver I could find.

Next step on the road to IRPs: create and use an imitation of the
Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can
simulate driver stacking.

In Windows, each loaded driver image is attached to a DRIVER_OBJECT
structure. Windows uses the registry to match up a given vendor/device
ID combination with a corresponding DRIVER_OBJECT. When a driver image
is first loaded, its DriverEntry() routine is invoked, which sets up
the AddDevice() function pointer in the DRIVER_OBJECT and creates
a dispatch table (based on IRP major codes). When a Windows bus driver
detects a new device, it creates a Physical Device Object (PDO) for
it. This is a DEVICE_OBJECT structure, with semantics analagous to
that of a device_t in FreeBSD. The Windows PNP manager will invoke
the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT
and the PDO.

The AddDevice() function then creates a new DRIVER_OBJECT structure of
its own. This is known as the Functional Device Object (FDO) and
corresponds roughly to a private softc instance. The driver uses
IoAttachDeviceToDeviceStack() to add this device object to the
driver stack for this PDO. Subsequent drivers (called filter drivers
in Windows-speak) can be loaded which add themselves to the stack.
When someone issues an IRP to a device, it travel along the stack
passing through several possible filter drivers until it reaches
the functional driver (which actually knows how to talk to the hardware)
at which point it will be completed. This is how Windows achieves
driver layering.

Project Evil now simulates most of this. if_ndis now has a modevent
handler which will use MOD_LOAD and MOD_UNLOAD events to drive the
creation and destruction of DRIVER_OBJECTs. (The load event also
does the relocation/dynalinking of the image.) We don't have a registry,
so the DRIVER_OBJECTS are stored in a linked list for now. Eventually,
the list entry will contain the vendor/device ID list extracted from
the .INF file. When ndis_probe() is called and detectes a supported
device, it will create a PDO for the device instance and attach it
to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call
our NdisAddDevice() handler to create the FDO. The NDIS miniport block
is now a device extension hung off the FDO, just as it is in Windows.
The miniport characteristics table is now an extension hung off the
DRIVER_OBJECT as well (the characteristics are the same for all devices
handled by a given driver, so they don't need to be per-instance.)
We also do an IoAttachDeviceToDeviceStack() to put the FDO on the
stack for the PDO. There are a couple of fake bus drivers created
for the PCI and pccard buses. Eventually, there will be one for USB,
which will actually accept USB IRP.s

Things should still work just as before, only now we do things in
the proper order and maintain the correct framework to support passing
IRPs between drivers.

Various changes:

- corrected the comments about IRQL handling in subr_hal.c to more
accurately reflect reality
- update ndiscvt to make the drv_data symbol in ndis_driver_data.h a
global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it.
- Obtain the softc pointer from the miniport block by referencing
the PDO rather than a private pointer of our own (nmb_ifp is no
longer used)
- implement IoAttachDeviceToDeviceStack(), IoDetachDevice(),
IoGetAttachedDevice(), IoAllocateDriverObjectExtension(),
IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(),
IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(),
IoInitializeIrp()
- fix a few mistakes in the driver_object and device_object definitions
- add a new module, kern_windrv.c, to handle the driver registration
and relocation/dynalinkign duties (which don't really belong in
kern_ndis.c).
- made ndis_block and ndis_chars in the ndis_softc stucture pointers
and modified all references to it
- fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they
work correctly with the new driver_object mechanism
- changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver()
(which is now deprecated)
- used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines
instead of kludged up alloc/free routines
- added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.

Scheduled mdoc(7) sweep.

Get rid of obsolete MAN[0-9] syntax.

Today, RealTek sent me a driver to test which had been compiled with
some debug support turned on. It turns out the sections in this driver
binary had relative virtual addresses (RVAs) that were different
from the raw addresses, and it had a .data section where the virtual size
was much larger than the raw size. (Most production binaries produced
with the Microsoft DDK have RVA == PA.)

There's code in the ndiscvt(8) utility that's supposed to handle
the vsize != rsize case, but it turns out it was slightly broken,
and it failed to handle the RVA != RA case at all. Hopefully, this
commit will fix all that.

Big mess 'o changes:

- Give ndiscvt(8) the ability to process a .SYS file directly into
a .o file so that we don't have to emit big messy char arrays into
the ndis_driver_data.h file. This behavior is currently optional, but
may become the default some day.

- Give ndiscvt(8) the ability to turn arbitrary files into .ko files
so that they can be pre-loaded or kldloaded. (Both this and the
previous change involve using objcopy(1)).

- Give NdisOpenFile() the ability to 'read' files out of kernel memory
that have been kldloaded or pre-loaded, and disallow the use of
the normal vn_open() file opening method during bootstrap (when no
filesystems have been mounted yet). Some people have reported that
kldloading if_ndis.ko works fine when the system is running multiuser
but causes a panic when the modile is pre-loaded by /boot/loader. This
happens with drivers that need to use NdisOpenFile() to access
external files (i.e. firmware images). NdisOpenFile() won't work
during kernel bootstrapping because no filesystems have been mounted.
To get around this, you can now do the following:

o Say you have a firmware file called firmware.img
o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko
o Put the firmware.img.ko in /boot/kernel
o add firmware.img_load="YES" in /boot/loader.conf
o add if_ndis_load="YES" and ndis_load="YES" as well

Now the loader will suck the additional file into memory as a .ko. The
phony .ko has two symbols in it: filename_start and filename_end, which
are generated by objcopy(1). ndis_open_file() will traverse each module
in the module list looking for these symbols and, if it finds them, it'll
use them to generate the file mapping address and length values that
the caller of NdisOpenFile() wants.

As a bonus, this will even work if the file has been statically linked
into the kernel itself, since the "kernel" module is searched too.
(ndiscvt(8) will generate both filename.o and filename.ko for you).

- Modify the mechanism used to provide make-pretend FASTCALL support.
Rather than using inline assembly to yank the first two arguments
out of %ecx and %edx, we now use the __regparm__(3) attribute (and
the __stdcall__ attribute) and use some macro magic to re-order
the arguments and provide dummy arguments as needed so that the
arguments passed in registers end up in the right place. Change
taken from DragonflyBSD version of the NDISulator.

Assorted markup, grammar, and spelling fixes.

Add preliminary support for PCMCIA devices in addition to PCI/cardbus.
if_ndis.c has been split into if_ndis_pci.c and if_ndis_pccard.c.
The ndiscvt(8) utility should be able to parse device info for PCMCIA
devices now. The ndis_alloc_amem() has moved from kern_ndis.c to
if_ndis_pccard.c so that kern_ndis.c no longer depends on pccard.

NOTE: this stuff is not guaranteed to work 100% correctly yet. So
far I have been able to load/init my PCMCIA Cisco Aironet 340 card,
but it crashes in the interrupt handler. The existing support for
PCI/cardbus devices should still work as before.

style.Makefile(5):
Use WARNS?= instead of WARNS=.

Some Windows .INF files are deliberately sabotaged to prevent them from
loading on a particular version of Windows. For example, a .INF file
for a Windows 2000 driver may have an empty [foo.NT.5.1] section which
will be ingored on Win2K (whose .INF parser won't look for sections
decorated with .NT.5.1) in favor of a [foo] section. Likewise, a
WinXP file will have an empty [foo] section which will be ignored in
favor of [foo.NT.5.1].

The problem is, we can handle both Win2K and WinXP drivers, and we
don't want to exclude either one.

As a workaround, we try to pretend we are WinXP by default and search
for sections decorated with .NT.5.1, but if we don't turn up any records,
we assume that maybe we're being fooled by a sabotaged .INF file and
make one more pass looking for undecorated sections instead.

This allows us to parse the .INF files for both the Win2K and the WinXP
Centrino wireless drivers.

I'd give anything for 5 minutes alone in a room with whoever wrote
Microsoft's .INF file parser. Just 5 minutes. That's all.

Deal with keys with descriptions that have empty fields in some of
their lines.

Properly discard PCMCIA device declarations. I plan to support
PCMCIA cards, but they don't work yet, and it appears some .INF files
declare both PCI and PCMCIA device instances.

Yet another inf file handling tweak: when checking for Ndi\Params\foo
keys, don't just do a substring match on "Ndi\Params". Instead, check
explicitly for strings that begin with "Ndi\Params". Why? Because it's
possible to create your own keys with different paths, like
"PROSetNdi\NdiExt\Params" which is what Intel does in their PRO/1000
driver's .INF file.

- Handle doubled double quotes:
`"""foo"" bar"' -> `"foo" bar'
- Handle C++ style comments.

Requested by: wpaul

Tweak ndiscvt to support yet another flavor of .INF files (look for
the NTx86 section decoration).

subr_ndis.c: correct the behavior of ndis_query_resources(): if the
caller doesn't provide enough space to return the resources, tell it
how much it needs to provide and return an error.

subr_hal.c & subr_ntoskrnl.c: implement/stub a bunch of new routines;

ntoskrnl:

KefAcquireSpinLockAtDpcLevel
KefReleaseSpinLockFromDpcLevel
MmMapLockedPages
InterlockedDecrement
InterlockedIncrement
IoFreeMdl
KeInitializeSpinLock

HAL:

KfReleaseSpinLock
KeGetCurrentIrql
KfAcquireSpinLock

Lastly, correct spelling of "_aullshr" in the ntoskrnl functable.

Fix usage() (-d is really -n).

Handle WinNT .inf files with a $windows nt$ signature but no .NT decorated
AddReg sections.

Also insert extra newline after emitting device name overrides.

Clean up ndiscvt a bit (leaving out the -i flag didn't work) and add
copyrights to the inf parser files.

Add a -n flag to ndiscvt to allow the user to override the default
device name of NDIS devices. Instead of "ndis0, ndis1, etc..."
you can have "foo0, foo1, etc..." This allows you to have more than
one kind of NDIS device in the kernel at the same time.

Convert from printf() to device_printf() in if_ndis.c, kern_ndis.c
and subr_ndis.c.

Create UMA zones for ndis_packet and ndis_buffer structs allocated
on transmit. The zones are created and destroyed in the modevent
handler in kern_ndis.c.

printf() and UMA changes submitted by green@freebsd.org

Remember to use stringcvt() to expand %foo% strings in registry values in
dump_defaultinfo().

Noticed by: green@freebsd.org

Correct a typo in the text.
Remove BUGS section since the bug it describes has been fixed.
Spell Matt Dodd's name correctly. (Oops.)

Make ndiscvt(8) emit the binary image array as inline assembly code rather
than a char array. Emitting the data as a big char array works fine in
the typical case, where a .sys file may be ~50K in size. Unfortunately,
some .sys files can be several hundred Kbytes in size, or even several
megabytes in size. One extreme case is the Intel centrino wireless
driver, which is 2.4MB. This causes us to emit an ndis_driver_data.h
file that's on the order of 15MB in size, and gcc consumes enormous
amounts of virtual memory while trying to compile it. On my laptop,
with 128MB of RAM and 256MB of swap space, gcc consumed all available
VM and crashed without being able to compile if_ndis.o.

By emitting the array as assembler, we bypass the C compiler and consume
much less memory. I was able to easily test compile if_ndis.ko with the
centrino driver on my laptop after this change.

This is merely a convenience, and should not have any operational effect
on the NDISulator itself.

Grrrr. Remove -g flag that snuck in.

Deal with the duplicate sysctl leaf problem. A .inf file may contain
definitions for more than one device (usually differentiated by
the PCI subvendor/subdevice ID). Each device also has its own tree
of registry keys. In some cases, each device has the same keys, but
sometimes each device has a unique tree but with overlap. Originally,
I just had ndiscvt(8) dump out all the keys it could find, and we
would try to apply them to every device we could find. Now, each key
has an index number that matches it to a device in the device ID list.
This lets us create just the keys that apply to a particular device.

I also added an extra field to the device list to hold the subvendor
and subdevice ID.

Some devices are generic, i.e. there is no subsystem definition. If
we have a device that doesn't match a specific subsystem value and
we have a generic entry, we use the generic entry.

Support yet another variant of WinXP .INF files.

Attempt to handle WinXP .INF files. Also, in dump_regvals(), handle
the case where there's an entry in the manufacturer's device list but
no corresponding installation section (and hence no AddReg assignments),
i.e. if dev = find_assign(sname, "AddReg"); returns NULL, then
don't try to dereference dev.

There is a fundamental problem with the handling of .INF files that
contain definitions for multiple devices: right now we dump all the
AddReg sections that we find, but don't distinguish what device they
belong to. This often results in duplicate keys.

Fix handling of .INF files with more than one PCI ID defined.

Fix getopt() string so -o works.

Grrr. Put the right .PATH statements in the right Makefiles.

Commit the ndiscvt(8) utility too. (Missed it in the last import.)