Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r268767:
Add support for VMWare dialect of EXTENDED COPY command, aka VAAI Clone.

This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.

LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.

Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!

Sponsored by: iXsystems, Inc.

MFC r268457 (by pluknet):
Fix typos.

MFC r268289:
Fix minor copy-paste bug in r268284.

MFC r268447:
Add LUN options to specify 64-bit EUI and NAA identifiers.

MFC r268363:
Add support for READ FULL STATUS action of PERSISTENT RESERVE IN command.

MFC r268293:
Burry devid port method, which was a gross hack.

Instead make ports provide wanted port and target IDs, and LUNs provide
wanted LUN IDs. After that core Device ID VPD code only had to link all
of them together and add relative port and port group numbers.

LUN ID for iSCSI LUNs no longer created by CTL, but by ctld, and passed
to CTL as "scsiname" LUN option. This makes LUNs to report the same set
of IDs, independently from the port through which it is accessed, as
required by SCSI specifications.

MFC r268284:
Introduce new IOCTL CTL_PORT_LIST reporting in more flexible XML format.

Leave old CTL_GET_PORT_LIST in place so far. Garbage-collect it later.

MFC r267516i (by joel):
mdoc: add missing width to Bl -tag.

MFC r267506:
Document additional LUN/backend options.

Hoist all the mergeinfo up to the root in preparation for enforcing merges
to the root only. All MFC's were rerecorded to the root.

Going forward, if an MFC includes mergeinfo, it will need to be made to
the root and committed from the root. Merges with --ignore-ancestry
or diff | patch can go anywhere.

The mergeinfo in HEAD is in a bad state from years of neglect and manual
tampering and this was branched into 10.x. This confuses the coalescing
code and prevents it from doing its job.

Approved by: re (gjb, implicit)

MFC r257379:

Rename '-h' option to '-p', and use "portal" instead of "host" or "address",
in order to be consistent with iSCSI terminology. Besides, calling the
option '-h' was just wrong.

This changes usage for newly added iscsictl(8), and two newly added
subcommands to ctladm(8). This breaks POLA between CURRENT and 10,
but since 10.0 has not been released yet, it's still ok to do.

MFC r257380:

Bump .Dd after r257379.

Approved by: re (glebius)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Fix two off-by-ones.

Coverity CID: 1087999, 1011375
Approved by: re (glebius)
Sponsored by: FreeBSD Foundation

Fix incorrect use of sizeof().

Coverity CID: 1011303
Approved by: re (glebius)
Sponsored by: FreeBSD Foundation

Bring in the new iSCSI target and initiator.

Reviewed by: ken (parts)
Approved by: re (delphij)
Sponsored by: FreeBSD Foundation

Check the return value of sbuf_finish().

MFC after: 1 week

Remove contractions.

Make ctladm(8) try to load ctl.ko kernel module if needed.

Reviewed by: ken

Fix dates in manual pages modified in 249009.

Make it possible to build CTL as a module.

Reviewed by: ken
Sponsored by: FreeBSD Foundation

More -Wmissing-variable-declarations fixes.

In addition to adding `static' where possible:

- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.

In usr.sbin/ctladm/ctladm.c, function cctl_error_inject(), initialize
the 'retval' variable to zero, to avoid returning garbage in several
cases.

This fixes the following clang 3.2 warnings:

usr.sbin/ctladm/ctladm.c:1234:6: error: variable 'retval' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1243:10: note: uninitialized use occurs here
return (retval);
^~~~~~
usr.sbin/ctladm/ctladm.c:1234:2: note: remove the 'if' if its condition is always true
if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1161:7: error: variable 'retval' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1243:10: note: uninitialized use occurs here
return (retval);
^~~~~~
usr.sbin/ctladm/ctladm.c:1161:3: note: remove the 'if' if its condition is always true
if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1029:12: note: initialize the variable 'retval' to silence this warning
int retval;
^
= 0

MFC after: 1 week

Remove variables which are initialized but never used thereafter reported by gcc46 warning

Approved by: cperciva
MFC After: 3 days

Minor spelling fixes.

Fixes to man8 groff mandoc style, usage mistakes, or typos.

PR: 168016
Submitted by: Nobuyuki Koganemaru
Approved by: gjb
MFC after: 3 days

Remove trailing whitespace per mdoc lint warning

Disussed with: gavin
No objection from: doc
Approved by: joel
MFC after: 3 days

Remove superfluous paragraph macro.

Add LUN resizing to CTL. Also make it possible to explicitly set
size when creating file-backed or device-backed LUN.

Reviewed by: ken (earlier version)
Sponsored by: The FreeBSD Foundation

Add the CAM Target Layer (CTL).

CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
functional.

ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.

ctl.h: Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h: The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.

ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.

ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.

ctl_debug.h: Debugging support.

ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.

ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.

ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.

ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.

ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.

ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.

ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.

ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.

scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.

README.ctl.txt: CTL code features, roadmap, to-do list.

usr.sbin/Makefile: Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.

usr.bin/Makefile: Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.

sys/conf/files: Add CTL files.

sys/conf/NOTES: Add device ctl.

sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.

Add several mode page definitions for CTL.

sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.

scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.

i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.

Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month