Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Set up the /usr/tests hierarchy.

This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.

Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Revert r256095, r256120 (partial), r256121:

r256095:
- Add gnu/usr.bin/rcs back to the base system.

r256120:
- Add WITHOUT_RCS back to src.conf.5.

r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.

Requested by: many
Approved by: re (marius)
Discussed with: core

Good bye RCS. You will be missed.

(devel/rcs and devel/rcs57 are available as alternatives)

Approved by: core
Approved by: re (hrs)

Remove BIND.

Approved by: re (gjb)

Update Bind to 9.9.3-P2

Notable new features:

* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]

* Introduces a new tool "dnssec-verify" that validates a signed zone,
checking for the correctness of signatures and NSEC/NSEC3 chains.
[RT #23673]

* BIND now recognizes the TLSA resource record type, created to
support IETF DANE (DNS-based Authentication of Named Entities)
[RT #28989]

* The new "inline-signing" option, in combination with the
"auto-dnssec" option that was introduced in BIND 9.7, allows
named to sign zones completely transparently.

Approved by: delphij (mentor)
MFC after: 3 days
Sponsored by: DK Hostmaster A/S

Adding urtwn(4) firmware and related changes.

Reviewed by: rpaulo
Approved by: sbruno (mentor)

Remove CVS from the base system.

Discussed with: many
Reviewed by: peter, zi
Approved by: core

Add ATF to the build. This is may be a bit rought around the egdes,
but committing it helps to get everyone on the same page and makes
sure we make progress.

Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.

Credits follow:

Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@

Disconnect non-MPSAFE PORTALFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.

Don't build and install the 07.lpd doc if WITHOUT_LPR is set.

MFC after: 1 week

The BIND 9.8.2 tarball was re-rolled to remove 9.8.1 release notes.
This change was noticed by ISC at:

https://lists.isc.org/pipermail/bind-users/2012-April/087345.html

and verified by me both by comparing the contents of the old and new
distfiles and by verifying the PGP signature on the new distfile.

Add Bv9ARM.pdf to the list of docs to install.

Spelling fixes for share/

- change "is is" to "is" or "it is"
- change "the the" to "the"

Approved by: lstewart
Approved by: sahil (mentor)
MFC after: 3 days

Revive the LLVM and Clang license files, which were removed in my
too-thorough cleanup of unused files, in r213695. Also make sure these
get installed under /usr/share/doc.

Submitted by: rwatson, brooks
Pointy hat to: dim
MFC after: 3 days

Upgrade to BIND version 9.8.1. Release notes at:

https://deepthought.isc.org/article/AA-00446/81/
or
/usr/src/contrib/bind9/

Approved by: re (kib)

bmake and other updates necessary for the BIND 9.8.x upgrade.

This includes a structural change regarding atomic ops. Previously they
were enabled on all platforms unless we had knowledge that they did not
work. However both work performed by marius@ on sparc64 and the fact that
the 9.8.x branch is fussier in this area has demonstrated that this is
not a safe approach. So I've modified a patch provided by marius to
enable them for i386, amd64, and ia64 only.

Rename 07.lpr to 07.lpd and re-connect to the build. This was
forgotten in r216178.

Submitted by: antoine
Pointyhat: uqs

Fix typo - "is is" should have been changed to "it is" in r218965.

Fix typos - remove duplicate "is".

PR: docs/154934
Submitted by: Eitan Adler <lists at eitanadler.com>
MFC after: 3 days

Flesh out WITHOUT_GROFF support to DTRT.

A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.

vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.

Reviewed by: ru (partial)

Unroll vgrind filter to no longer depend on vgrind(1) during buildworld.

The source files haven't been touched in ages and this is unlikely
to change in the future.

Move most of the remaining USD/PSD/SMM papers into share/doc

Remove references to MAKEDEV(8)

Rename documentation source files to avoid filesystem case and restricted
filename issues when checking out the source on other operating systems.

I've verified the generated paper.ascii is identical before and after the
change.

Install Intel iwn(4) firmware license.

MFC after: 3 days

Move USD documents from /usr/share/doc/papers to to /usr/share/doc/usd.

Reviewed by: gabor

Add the KNOWN-DEFECTS file back in for the 9.6.1 release.

Update BIND to version 9.6.1rc1. This version has better performance and
lots of new features compared to 9.4.x, including:

Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.

Update bmake glue for changes in 9.4.3

Link wpi(4) into the build.

This includes:
o mtree (for legal/intel_wpi)
o manpage for i386/amd64 archs
o module for i386/amd64 archs
o NOTES for i386/amd64 archs

Approved by: mlaier (comentor)

Initial Import of wpi driver based on p4 changeset 128641.

This import includes:
o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi)
o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE)
o wpifw Firmware driver (sys/modules/wpifw)

Approved by: mlaier, sam (co-mentors)

Update bmake glue for the BIND 9.4.1 import.

This includes a return to building with threads, since one of the
major focuses of the 9.4.x branch is to improve thread performance.

style(9) fixes.

Reported by: ru

- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.

Reviewed by: mlaier, sam
Permitted by: Intel (via Andrew Wilson)
MFC after: 1 month

Remove some comments about NetBSD. This in on FreeBSD and we do not
want to confuse people at the very beginning.
Sync TOC/paragraph numbers in the text.

Requested by: Benedikt Stockebrand during his talk at EuroBSDCon 2006
Reviewed by: gnn

Sort SUBDIR.

Commit the results of the typo hunt by Darren Pilgrim.
This change affects documentation and comments only,
no real code involved.

PR: misc/101245
Submitted by: Darren Pilgrim <darren pilgrim bitfreak org>
Tested by: md5(1)
MFC after: 1 week

Reimplementation of world/kernel build options. For details, see:

http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html

The src.conf(5) manpage is to follow in a few days.

Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)

sync with KAME regarding NDP

- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month

The Berkeley pascal implementation for the VAX 11/780 has only
historical relevance these days, stow it in the attic instead of
on millions of FreeBSD computers.

Remove the \*(DY at the end of the document, it makes the installed
file differ for each install.

reflect scope change.

Obtained from: KAME

Remove the NQNFS paper.

We removed the corresponding code long time ago and the historically
interested can find this paper in the cvs repo, there is no point
in installing it any more.

Approved by: re@

Baby, we are not in Kansas anymore. Nor are we in 1996 or FreeBSD 2.1.
Note that these papers are mostly quite old, and add a pointer to
more recent docs.

Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities
and documentation into -CURRENT.

Bump FreeBSD_version.

Reviewed by: alc, jhb (kernel changes)

There is no longer a KNOWN_DEFECTS file, so don't try to install it.

Start the dreaded NOFOO -> NO_FOO conversion.

OK'ed by: core

For variables that are only checked with defined(), don't provide
any fake value.

Ruslan teaches me yet another useful fact. "Please sort these lexically"
does NOT mean in Unix-caps-first order.

Install the documentation for bind9, and remove the /usr/share/doc/bind
directory from mtree while we're at it.

Help, advice, and code from: ru, des

Fix typo.

Found by: imp

Normalize.

- refrect recent changes.
- add table of contents.
- add section 4.8 - Operations with IPsec tunnel mode.
- add section 9 - Policy on technology with intellectual property
right restriction
- more about KAME's codeing style.

Obtained from: KAME

- support AES counter mode for ESP.
- use size_t as return type of schedlen(), as there's no error
check needed.
- clear key schedule buffer before freeing.

Obtained from: KAME

- RIPEMD160 support
- pass size arg to ah->result (avoid assuming result buffer size)

Obtained from: KAME

Correct troff usage; typo fixes.

Allow the PS version of this paper to be built.

Remove MAINTAINER= lines from individual Makefiles in favor of the
MAINTAINER file (which already had entries for sendmail).

de-__P
use port/proto to represent services (not proto/port).
add FBSDID

String the timecounter paper into the build.

Add my timecounter paper from EuroBSDcon2002

Remove some KerberosIV references that are now stale.

Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.

Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.

Fixes to get rid of CD_HACK.

Fixes to get rid of CD_HACK.

PRINTERDEVICE can now take multiple values.

Index is unique for each PRINTERDEVICE.

Abuse .for so that the variable expansion works inside the N modifier.
This won't be a simple abuse with the next version of bsd.doc.mk
which will support multi-value PRINTERDEVICE.

Use a single style for share/doc/ makefiles.

Sort SUBDIR list.
Don't mention SGML docs which now live elsewhere.

bsd.doc.mk changes:

Don't gratuitously pipe thru a cat(1) if NODOCCOMPRESS.

Only create _stamp.extra when necessary.

Get rid of SOELIMPP and OBJS.

Use Groff version of soelim(1); we need its -I option
for the following to work.

Don't needlessly chdir to SRCDIR. Only a few documents
need CD_HACK, and those that need it either use refer(1)
or .PSPIC macro which internally uses the .psbb call.

Preprocess with tbl(1) only where needed.

Don't preprocess with tbl(1).

Kill the remnants of BOG.

Preprocess with tbl(1).

Don't preprocess with tbl(1).

Don't preprocess with tbl(1).

Simplify.

Don't preprocess with tbl(1).

Preprocess with tbl(1).

Eliminate warnings.

Preprocess with tbl(1), eliminate warnings.

Fixed a warning.

Fixed references and a bunch of other warnings.

Move more games stuff to the attic.

Do not build the majority of the games. Remaining are the
"utility-like" games and everyone's favourite, fortune(6).

Fix a dozen typos, among them dmr's last name :-) and the ever so
popular "dependant" (which the original reference manual does not have).

Nuke whitespace at EOL.

Make it works with POSIX sort (POS arg)
All old sorts understand -k too.

Make it official. The old BIND Operator's Guide has no information
relevant to operation of a modern name server.

Unbreak build by removing 10.named for now

Nuke SCCS docos, they're dead, again.

Remove references to UIO_USERISPACE which no longer exists.

Note that this is a historical document and that users should refer
to flex(1) in preference.

Reviewed by: grog
Approved by: dwmalone (mentor)

PSD:19 (curses) is long dead.

Unencumber.

Build sccs(1) docs.

19.curses wasn't encumbered, it's just dead.

Fixed build of recently added legacy docs.

Reviewed by: grog

Reconnect 21.troff to the build.

Build this document in a standard way.

Fixed roffing.

Check that src/games exists in a less error-prone way.

PR: misc/38292

Remove 21.troff from the build, it is broken.

Unbreak world.

Obtained from: mark
Pointy hat to: grog

Change msU macros to mU.

This is only a partial solution; the whole issue of building the
documentation needs to be revisited.

Remove subdirectories 3, 4, and 17 from the build; they do not build
properly at this time.

Include the following previously encumbered documentation in the build:

01.cacm 02.implement 03.iosys 04.uprog 06.Clang 15.yacc 16.lex 17.m4

Some of these produce a number of warnings. I don't want to remove
them yet, because some noble soul may decide to remove the cause of
the warnings, but they won't if it doesn't bite them.

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make buildable under FreeBSD. This one was relatively easy, though it
still contains obscenities.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make buildable under FreeBSD.

This one's a real mess. It's full of undefined macros, and in one
place deliberately causes syntax warnings. I've decided against
taking out the undefined macros: they don't alter the format of the
output document, and maybe one day somebody will put in the macro
definitions.

Note that this file corrects a number of format errors which appear in
the O'Reilly 4.4BSD manual set.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make buildable under FreeBSD. This was relatively complicated: the
original text used the msU macros, which are available in a number of
different kinds. This version uses a number of mm-like macros,
including AL and BL, which just aren't available in ms, and the msU
macros I've found (even the ones in 4.4BSD) don't have them either. I
replaced them with ms constructs, which makes it format better than
the O'Reilly document, but I wasn't able to get the table of contents
(ms doesn't have that facility).

Add a prominent comment that this is not a reference for any modern
version of C.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make buildable under FreeBSD.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make buildable under FreeBSD.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make roughly buildable under FreeBSD.

The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make roughly buildable under FreeBSD.

The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing.

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Make roughly buildable under FreeBSD.

The results are not perfect: the original Makefile referred to a refer
file papers/Ind, which doesn't seem to have been kept, so the
references to other publications are missing. In addition, the
pagination is not correct, with the result that some .DS/.DE blocks
leave large amounts of white space empty before them. Possibly this
could be fixed by putting the (blank) footnotes at the end.

PR: 35345
Requested by: Tony Finch <fanf@dotat.at>

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Include 21.troff and 22.trofftut in the build.

Correct build targets.

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Remove original license disclaimer.
Add Caldera license.

Approved by: David Taylor <davidt@caldera.com>

Add note that the documentation does not describe groff.

Make the documentation build.

This does not use the standard build macros for two reasons:

1. There's more than one document (paper and appendix).
2. The standard build macros need revision anyway (we shouldn't need
to set variables to get PostScript output, it should be a separate
target).

If anybody feels offended by this breach of style, feel free to fix
it.

Add Caldera license
Make buildable under FreeBSD.

Approved by: David Taylor <davidt@caldera.com>

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Approved by: David Taylor <davidt@caldera.com>

Initial checkin: 4.4BSD version. These files need to be updated with
current license information and adapted to the FreeBSD build
environment before they will build.

Remove comment about encumbered sources. All these sources have now
been released under a BSD-style license by Caldera, the current owner
of the UNIX source code.

Approved by: David Taylor <davidt@caldera.com>

Modernize my email address.

Preprocess with pic(1).

Fix typo.

Approved by: phk

The DEVFS paper presented at BSDcon-euro 2001 and BSDcon-2002.

- Attempt to help declutter kern. sysctl by moving security out from
beneath it.

Reviewed by: rwatson

FILES support for bsd.prog.mk. See bsd.README for details.

Stolen from: NetBSD

Removed a no-op FILES from bsd.doc.mk.

- Fix sysctl mib examples in order to reflect the recent changes in
kern_jail.c

Approved by: rwatson
Reviewed by: rwatson

Fix NO_SENDMAIL knob. When FreeBSD's old BSD version of vacation was
replaced with the new version in sendmail's distribution, vacation and
the necessary libraries (libsmdb and libsmutil) were changed so they
were always compiled. This broke people who didn't checkout
src/contrib/sendmail/. I don't know if it's best to think of NO_SENDMAIL
as no sendmail sources available or no sendmail binary. It is now the former.

Also, remove the sendmail chapter from System Managers Manual (SMM) if
NO_SENDMAIL is defined (for similar reasons -- source not available).

PR: 31863, 31865
Submitted by: matusita, Joe Kelsey <joe@zircon.seattle.wa.us>
MFC after: 3 days

Just typo corrections (mmunmap->munmap etc), no content changes.

MFC after: 1 week

Don't build/install game-related documents when building with NOGAMES.
This fixes buildworld when src/games doesn't exist (this may not be
"officially" supported, but there's no sense in making it harder for
somebody that wants to do it).

PR: 29162
Submitted by: Stewart Morgan <stewart@nameless-uk.com>

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

Remove vestiges of MFS.

uucp.daemon -> uucp:daemon

Remove the MFS paper.

Synch with new contrib/groff/ directory layout.

Groff 1.16.1 implements .psbb request internally in troff(1)
rather than as a macro using the .sy request, so we may drop
the unsafe (-U) mode.

These groff(1) documents require sed(1) parsing.

This page requires tbl(1).

Eliminate a few more groff(1) warnings.

Eliminate groff(1) warnings.

Eliminate groff(1) warnings.

Backout rev 1.2 (this paper is in me(7) not in ms(7) format),
eliminate remaining groff(1) warnings.

Eliminate groff(1) warnings.

Eliminate ``number register `.U' not defined'' groff(1) warnings.

Eliminate groff(1) warnings.

Eliminate groff(1) warnings, unbind from tbl(1).

${GRIND} implies -f.

Eliminate groff(1) warnings.

Eliminate groff(1) warnings.

Use groff(1) versions of these documents.

Eliminate groff(1) warnings: unbreak refer(1)ences.

Eliminate groff(1) warnings.

MAXHOSTNAMELEN is 256, not 64

Eliminate groff(1) warnings.

The default format for troff documentation is set with PRINTERDEVICE.

Make this paper buildable in nroff mode, eliminate warnings,
do not force default printing device and compression mode.

Reimplement the groff(1) warnings elimination fixes in a better way.

Eliminate groff(1) warnings.

Eliminate groff(1) warnings.

Starting from groff(1) version 1.12, -msafer is now the default,
but index building for 13.viref requires the use of .sy request.
Repair the index building by running groff(1) in unsafe -U mode.

Requested by: bde

Remove a doubled "in the".

PR: docs/22140
Submitted by: Cyrille Lefevre <clefevre@citeweb.net>

Update to include a link to the referenced papers when PRINTERDEVICE=html

PR: docs/22140
Submitted by: Cyrille Lefevre <clefevre@citeweb.net>

Add a MAINTAINER= line so people know who to blame

Reviewed by: rwatson, bp
Approved by: rwatson
Obtained from: NetBSD source tree

Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.

Details:

* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/

* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now

* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.

I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)

This now allows us to support multiple filesystem types during bootup.

Fix typos.

Approved by: phk

The rest of the changes needed to support the new version of sendmail (8.11.0).
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.

Add the bufbio paper to the build.

Various plans to move all these to the doc tree exist pending time and
somebody to docbook them.

Add the bio/buf paper

sync with recent IMPLEMENTATION note from kame.

o Minor spelling/grammar nits in intro header about conference
- s/netoworking/Networking/
- s/are/is/

Typo.

Spotted by: sobomax

Correct misspelling of INADDR_ANY as IN_ADDRANY.

Put the jail paper in the makefile.

The Jail paper, written jointly by rwatson & me.

Add "IPv6" to SUBDIR, and also add the Makefile for IPv6 dir,
to make the file IMPLEMENTATION to be installed to /usr/share/doc/IPv6.

PR: docs/17120
Kindly Submitted by: phantom

Add IPv6 related docs.

Reviewed by: phantom

To avoid confusion, zap libcurses. ncurses provides both curses, termcap
and termlib (terminfo) support.

$Id$ -> $FreeBSD$

Represent the value 2**32 correctly in nroff. Previously, the troff
operator up was being omitted, and the result was 232, a slightly
lower value.

Observed-by: Bill Vermillion <bill@bilver.magicnet.net>

Find sendmail source under contrib now.

Oops, the SRCDIR=${.OBJDIR} hack is still necessary, (since bsd.doc.mk
has to cd to ${SRCDIR} to support inclusion messes elsewhere).
Fortunately the previous commit forgot to remove it.

Cleaned up. tmac.srefs was in both SRCS and EXTRAS. The
SRCDIR=${.OBDDIR} hack is now unnecessary. It was never necessary
to use so many explicit paths to ${.OBJDIR} and ${.CURDIR}.

Don't use `::' to break dependencies. Cleaned some nearby things.

Finished previous commit. Just revert to rev.1.9.

Bruce

Fix comment.
Scolded by: bde

omehow Jordan got 07.lpd in -current enabled again...

MF22: build lpd docs

Revert previous commit. Despite the names, these files contain
troff input, not C source.

Fix fprintf() here too.

\e should have been \n (don't know when this was broken).

Delete unused BINDIR variable.

<bsd.doc.mk> now includes ../Makefile.inc, so don't include it here.

Now that it's built at the same time as its source, disable building 07.lpr
here. Hopefully this will set a trend. (What was I thinking when I set
this up the first time?)

Make fix for PR 4883 consistent with other similar cases.

Back-out previous change. A better fix is to follow.
Requested-by: bde

The documentation contained here is horribly out of date.

Fix a couple of typos in documentation.
PR: 4883
Submitted by: invis@visi.com

PR: docs/4347
Makefile doesn't support cleandepend
Submitted by: wlr@furball.wellsfargo.com

Add a cleandepend target and tidy up a bit.

PR: docs/3257

$FreeBSD$ -> $Id$.
Removed Berkeley Id. We never did this like Berkeley (because cvs doesn't
handle symlinks) and no interesting Berkeley words are left.

Disconnect the FAQ and handbook from the makefiles and remove the files.
The FAQ and handbook have been repository copied to their own top-level
("doc") directory in the cvs tree which will not be branched so as to
avoid the syncing problems. At some point, the sgml text will require
formatting tools that will be from ports rather than the main source tree.

Requested by: jfieber, jkh

Updated some wording for 3.x.
Added MASTER_STIE_LOCAL and updated it's location.
Added -N to diff options to ensure the diff includes new files.
Mentioned that USENET news ports should use ${PREFIX}/news.
Refromatted some of the comments w/in the sample Makefile so they wouldn't
wrap in the latin1 format.
General updating and minor word changes.

Merge the EN version changes, 1.18 -> 1.19.

Add the new doc-all collection.

Merge the EN version chages, 1.247 -> 1.249.

Add Brian Handy <handy@lambic.space.lockheed.com> for his bclock
port submission.

Add Vanill Ice <vanilla@Minje.Com.TW> for the filerunner port update.

Merge the EN version changes, 1.246 -> 1.247.

Remove me from add. contributors, I am now in committers.

Merge the EN version changes, 1.245 -> 1.246.

Merge the en version changes, 1.67 -> 1.69.

Merge the EN version changes, 1.17 -> 1.18.

Fixed botched author entity definition.

Add the new src-contrib-crypto collection.

Fix my usual omission: add Philippe Charnier to the list of contributors.

Reminded by: max

Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>
Merge the EN version changes, 1.15 -> 1.17.

Typo fix. Also, __FreeBSD_version of -current doesn't change after
each release anymore. :)

Merge the EN version changes, 1.69 -> 1.70.

Bump the original revision by one.
(The previous commit took care of merging the en version changes.)

Document __FreeBSD_version values up to 2.2.2R. Should be in 2.2.2.

Change name of current release to 2.2.2. This should be in 2.2.2, it
will be pretty darn embarrassing to ship a release with a handbook
that claims it's one version older. :)

Change the release name

Merge the en version changes, 1.244 -> 1.245.

Removed my name from the list of contributors.
Corrected my name in the 386BSD Patch kit section.

Merge the EN version changes, 1.243 -> 1.244.

Added Chris Dabrowski < chris@vader.org> to the additional contributors list
for the traceroute port.

New translation of russian.sgml.
Add Motoyuki Konno <motoyuki@st.rim.or.jp> into the
contributors' list for Japanese translation.
Reviewed by: hanai@astec.co.jp
Submitted by: motoyuki@st.rim.or.jp

Add -links option to sgmlfmt (via SGMLOPTS).
This allows people to xref specific parts of the
handbook from elsewhere.

Merge the en version change, 1.242 -> 1.243.

Added Carey Jones <mcj@acquiesce.org> to additional contributors list for
the slrn port.

Catch up with the original.
Submitted by: HINO Koji <hino@nwk.cl.nec.co.jp>

Merge the EN version changes, 1.241 -> 1.242.

Change Noritaka Ishizumi's e-mail address in the additional contributor list.
PR: 3598
Requested-by: Noritaka Ishizumi

Merge the EN version changes, 1.240 -> 1.241.

Merge the EN version changes, 1.65 -> 1.67.

Add a comment to the >16M and >64M entries for lying COMPAQ BIOSes.

Added Gene Stark as a developer/CVS committer.

Fix a few typos in last commit.

Make things more descriptive.

PR: 1847
Submitted by: Peter Childs <pjchilds@imforei.apana.org.au>
Dirk-Willem van Gulik <Dirk.vanGulik@jrc.it>

Specify EUC-JP character encoding.

Remove this file to sync with the English version.

Change translation for some phrase.

Merge the en version changes, 1.13 -> 1.15.
Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>

Added russian.sgml and removed troubleshooting.sgml.

Merge the EN version changes, 1.10 -> 1.12.

Merge the EN version changes, 1.19 -> 1.21.

Merge the EN version changes, 1.28 -> 1.29.

Merge the EN version changes, 1.15 -> 1.17.

Merge the EN version changes, 1.16 -> 1.17.

Merge the en version changes, 1.9 -> 1.10.

Merge the EN version changes, 1.69 -> 1.75.

An empty file. (So that we can go ahead 'n' update handbook.sgml and
Makefile.)
The translation is in progress.

Merge the EN version changes, 1.22 -> 1.24.

<heading> should be closed by </heading> (not </>). :-)

Merge the en version changes, 1.11 -> 1.12.

Merge the en version changes, 1.52 -> 1.53.

Merge the en version changes, 1.24 -> 1.25.

Merge the en version changes made in 1.237 -> 1.240.
While at it, did some tabs <-> spaces conversion to match the JP version
to the EN version so that patch generated by cvs diff handbook/contrib.sgml
can be often reused to update the JP version.

Merge the en version changes made in 1.63 -> 1.65.

In one part, the list of addtional contributor wasn't kept in alphabetical
order.

Merge the en version changes made in 1.3 -> 1.4.

Add Kenjiro to the list of committers.

Quote ppp.conf correctly (<tt></tt>)

Don't use HISADDR in ppp.conf examples as it's not
set up properly 'till ppp.linkup is parsed.

PR: 3114
Submitted by: Kenneth R. Westerback <krw@tcn.net>

3.3-current -> 3.0-current

Clean up the slightly tortured english I produced yesterday. :)

Catch up with the original.
Submitted by: tomo@maple.elcom.nitech.ac.jp (WATANABE tomoo)

PR: none
Submitted by: pds

Fix FTP link to the statically linked FreeBSD executables
freefall -> hub

Describe SNAPs and RELENGes as requested on USENET.

Remove the last reference to sup as a current method. We now want
cvsup-mirrors now, not sup-mirrors.

Yikes! I thought I updated these references to sup ages ago.. Hmmmm!

Update our history a little (whoops - I thought I'd committed
this days ago!).

Update the URL for the CTM mirror at the University of Trier.

Submitted by: Sascha Blank <blank@fox.uni-trier.de>

bettter -> cleaner.

Use <sect1> for sectioning instead of <p><bf>..</bf></p>.

Markup debogification.
(<deflist><itemize>...</itemize></deflist> is nonsensical and should
not be allowed by the DTD)

Promote "The Ports Collection" to the chapter level.
Someone want to add a section to this chapter on PACKAGES?

Users, Groups, and Security -> Security
The chapter has evolved differently than I imagined when I made
up the title.

Merge "staying current", "staying stable" and "synching" into a
single chapter.

Move "source tree guidelines and policies" out of the dark dungeon
of the Appendix.

More formatting + more info

Improve SGML formatting.
Add more info.

Add more info about l10n

Add Localization section and Russian Language l10n description
(somebody with better English, please check!)

BTW: Next: entry have wrong name "Network Communications"
in Locale Setup although points to right direction.
Looks like sgmlfmt bug...

COFF sections not restricted to 16 bits.
Submitted by: cubfm :)

Add an entry about a.out vs ELF since I'm tired of reading about it.
Based-On-The-Postings-Of: joerg

Put the Troubleshooting chapter out of its misery.

Added two missing committers to the list of developer and
several missing port maintainers to the list of additional contributor.

Added new entities, a.jgreco and a.tedm.
(They have been mssing from the committers list although they are in
the group ncvs on freefall.)

Catch up with the original.
Submitted by: iwasaki@jp.FreeBSD.org

Catch up with the original.

Add description of ports-converters and ports-textproc.

Cosmetique changes in my entry, add yet one ID

Update ID in my pgp key

Integrated 1.54 -> 1.55 changes.

Mailto: was missing for one contact person's address.
Submitted by: Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
(Closing PR #3051.)

Catch up with the original.

Add Christoph Kukulies to donor's gallery.

Remove sef's email address.

- Added Samuel Lam <skl@ScalableNetwork.com> for his 3c589D patch.

Fix markup bogons.

Updating FAQ entry for X Inside.
Added FAQ entries for tape changers and login names.
Fixed <code> tags.

PR: docs/3324
PR: docs/3326

Point people at ftp://ftp.FreeBSD.ORG/pub/FreeBSD/CTM for the deltas
instead of ftp://freefall.cdrom.com/pub/CTM (which it hasn't been
for ages)

Downgrade Slaven Rezic's name from latin2 to latin1

Add Sean Eric Fagan and Chuck Robey for their kind monetary donations
to the project.

Add Stefan Bethke to all the usual places.

Fix typo-spam from yesterday (sorry John!)

Add Jack O'Neill for his donation of an NCR 53C575 controller card.

Fold hardware contributors section into the donor's gallery - no sense
in having two places for this.

Ulf has now also donated the case for "the new freefall" - amend his
entry accordingly.

Add Joe McGuckin for the Kingston ethernet card he donated.

Add a short blurb about the ports page in the "applications" question.
List all three packages directories in the ensuing packages description.

Add a short (in fact, very short) section about libc.so.3.0 and wrong
package versions.

Add a section on sysmouse configuration.
Suggested by: jkh

Catch up with the original.

Nate Johnson is now the Gallery/Commercial editor since Charles Wimmer
seems to have disappeared.

Add Jack O'Neill to donor's list.

Catch up with the original.

Expand donors list. Note: Anyone I missed, *please* contact me!
I'm only now starting to get this a little more well organized.

Add Kent Vander Velden for his various contributions via problem reports.

Also updated Keith Bostic's mail address while I was in the area.

Reorganize the donor's gallery to include people who've donated
parts to replace freefall.freebsd.org (so that we can use what's currently
there to replace spatter).

Catch up with the original.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Fix the typo about the DEC's NICs
Submitted by: morimitsu@jrdvms.enet.dec.com

Catch up with the original.

Catch up with the original.

Catch up with the original.
Submitted by: mihoko@pa.yokogawa.co.j

Catch up with the original.
Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>

Latest release is 2.2.1, not 2.1.7.

Mention the RELENG_2_2_1_RELEASE for getting FreeBSD-2.2.1.

New translation which corresponds to the 1.11 -> 1.12 change of
original.
Submitted by: mihoko@pa.yokogawa.co.jp

Catch up with the original.

Document how to debug LKMs with kgdb.

Reviewed by: J Wunsch <j@uriah.heep.sax.de>

Add BSD family tree to UNIX history section.

Update run - try and use the correct release numbers for everything.

FREEBSD-upgrade is now the "accpeted" name for the FreeBSD readme on
contributed soruces.

Typo.
Submitted by: Mihoko TANAKA <mihoko@pa.yokogawa.co.jp>

Fix spelling error.
Submitted by: Hiroyuki HANAI <hanai@astec.co.jp>

Catch up with the original.

Sync from 2.2

Fix the typo.
Submitted by: Nishika <nishika@cheerful.com>

Catch up with the original.

Added my name/address as requested by Wolfram Schneider.

Catch up with the original.

Add an example README.FreeBSD. The tcl one you tend to refer to since tcl
is the example is quite spartan.

As pointed out by Bruce there are *three* different filenames being used:

cvs FREEBSD.README
groff FREEBSD-upgrade
libgmp FREEBSD-upgrade
libpcap FREEBSD-upgrade
tcpdump FREEBSD-upgrade
traceroute FREEBSD-upgrade
tcl README.FreeBSD

The handbook states "README.FreeBSD". Perhaps this should be changed?

Correct the typo, `/heading>', to `</heading>'.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Add Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>

Catch up with the original.

Added Choi Jun Ho <junker@jazz.snu.ac.kr> for his kr-h2ps port.

Catch up with the original.
Submitted by: yoshiaki@kt.rim.or.jp and nao@tom-yam.or.jp

Catch up with the original.

Sync with the original.

Change X Inside to Xi Graphics

See http://www.xig.com/ci/pr/970219.xigraphics.html
Leading Software Company Changes Name to Avoid Confusion with Internet
Porn Denver -- A leading developer of high-performance graphical
software has changed its name from X Inside to Xi Graphics. The
reason: Ongoing confusion between the software developer and the
increasing number of X-rated pornography companies on the Internet

Change domain name xinside.com to xig.com

http://www.xig.com/ci/pr/970219.xigraphics.html

Leading Software Company Changes Name to Avoid Confusion with Internet
Porn Denver -- A leading developer of high-performance graphical
software has changed its name from X Inside to Xi Graphics. The
reason: Ongoing confusion between the software developer and the
increasing number of X-rated pornography companies on the Internet

Catch up with the original.

Catch up with the original.

Change the release number and <date> to fit with the current release.

Very minor word change.

Fix a minor grammar problem.

Reinstating stuff that fell out after jeorg's update...
Submitted-By: pds

Use the correct name for the HLT instruction.

Submitted by: bde

FreeBSD uses the HALT instruction in its idle loop to save power.

Noticed by: Stephen Roome <steve@visint.co.uk>

Update the O'Reilly books that are now in the 2nd ed.

The New Hacker's Dictionary (aka. the Jargon File) to the history section

Add "Lion's Commentary on UNIX, 6th Ed. w/source code".

Yep, you heard it, this book has survived since 1997 via the photocopier
underground. Well SCO decided it is now safe for us to see the 6th ed.
Kernel source. :-)

Fix Peter Salus's name.

Added UNIX System Architecture by Prabhat Andleigh.

This is a really nice small (274 pages) book on UNIX architecture.
It "reads" like K&R, has good straightforward explantions and nice diagrams
of structures and things, w/o unnessiary bulk. It covers both BSD and sysV.
I wish this had been the textbook for my undergrad OS class rather
than Tannenbam.

Added "Porting UNIX Software" by our own Greg Lehey.
This book has helped me more than once with the ports collection.

Added UNIX Internals -- The New Frontiers by Uresh Vahalia

Update URL for Chinese "Using FreeBSD"

FreeBSD-{stable,STABLE} ==> 2.1-STABLE

Changed 2.1.6 --> 2.1.7, or added 2.1.7 where applicable.

Attempts to clarify the FreeBSD-{current,stable} mess used here.
It is not clear what version of FBSD things apply to anymore.
"-CURRENT" ---> "2.2-RELEASE and later"

Mention that "options XSERVER" is applicable only to the vt0 console driver.
(as it appears from the mailing list archive).

Add cross-references from the "CTM Sites" and "CVSup Sites" sections
back to the CTM and CVSup documentation, respectively.

Catch up with the original.

Add descriptions of the tags RELENG_2_1_7_RELEASE and RELENG_2_2_0_RELEASE.

Now that i know how to use remote gdb, actually document it. Cool stuff,
btw.!

I've forgotten to change the `original revision:' field.

Catch up with the original.

Add Oliver Laumann for his troff translator

Catch up with the original.
Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>

Update configuration examples & instructions.
This should go into 2.2 as the examples bearly work for
static IP numbers (and don't for dynamic ones).

Describe the workaround for the CMD640 controller.

Mention the steps that are required for `disklabel auto'.

Ooops, somehow the HP Netserver entry made it here twice.

Update the HP NetServer LC FAQ entry.

Catch up with the original.

Fix ftp2.ru

close PR#2942 - add src/contrib to list of src components.
Submitted by: sjr1@flash.net

Catch up with the original.

Ask user to carefully examine changes when sending an upgrade. (Actually,
this is the main reason why we want them as diffs.) Also, ask them to
explicitly state files that are added or deleted (lazy committers like me
often forget to "cvs add" or "cvs remove").

Remove part about sending in complete ports for an upgrade, we prefer
recursive diffs in any case.

Catch up with the original.

Catch up with the original.

Add my pgp key

Correct a bogus URL to bash in an example.

Make enumerated list more cosmetically appealing.

Update installation info for upcoming releases.

Catch up with the original.

Add Jun-ichiro Itoh <itojun@csl.sony.co.jp> for his milliard of
multilingual nvi ports.

Fixed the incorrect "Original revision:" field.

Catch up with the original.

Add ports-korean [cv]sup target.

Sync with the original.

Oops! I've committed without confirming that make goes well.
Fix the SGML error, &S -> &amp;S.

Sync with the original.
Submitted by: Yukihiro Nakai <nakai@PyroPolis.t.u-tokyo.ac.jp>

Add Dan Cross for his bsvc port.

Add CVS II: Parallelizing Software Development PSD:28

Install RCS and CVS documents.

Add Matthew Hunt for his angband port.

Sync with the original.

Add Itsuro Saito <saito@miv.t.u-tokyo.ac.jp> and Makoto Matsushita
<matusita@ics.es.osaka-u.ac.jp> for their recent port submissions.

Added candy@fct.kgc.co.jp for his translation of bsd-style-copyright.

Include the bsd-style-copyright which was translated into Japanese
by candy@fct.kgc.co.jp
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Sync with the original.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Fix broken output. It did not work due the obj dir changes
in make(1) some months ago.

Use soelim preprocessor.

Do not include nonexisting file /usr/src/share/man/man0/toc8.

Create a subdirectory for every document. This make it easier to use
the default formating rules from <bsd.doc.mk>, especially for
PRINTERDEVICE=html.

Add MACROS=-ms. unroff(1) require a macro package as an argument.

Add Marc Slemko (marcs@znep.com) for his gopher patch. While I'm
here, add "&gt;" to the end of Marc Ramirez (mrami@mramirez.sy.yale.edu)'s
e-mail address.

Add Slaven Reziæ (Tomiæ) <eserte@cs.tu-berlin.de> for the locale
support.

Merge from 2.2 (I keep forgetting that my /usr/src is no longer -current).

Sync with the original.

Sync with the original.
Submitted by: WATANABE tomoo <tomo@maple.elcom.nitech.ac.jp>

Sync with the original.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Change my email address

Sync with the original.
Submitted by: Yukinori Maeda <yuki@zephyr.elcom.nitech.ac.jp>

Sync with the original.

Add descriptions for the individual src-* and ports-* collections.
Correct some errors and omissions in the listing of collections.

- Added "Brent J. Nordquist" <bjn@visi.com> for his pccard doc patch.

Bring in Argentina, Denmark, Poland.

Poland now has a proper hostmaster in charge of pl.freebsd.org

Sync with the original.
Submitted by: Hidetoshi Shimokawa <simokawa@jp.FreeBSD.ORG>

Sync with the original.
Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>

Sync with the original.

Add joel Sutton for his xgs port.

Synchronize the ``Original revision'' field with the original.

Update section about __FreeBSD_version. Add 2.1.7R (same as 2.1.6R), and
change 2.2R to 220000 and 3.0-current to 300000.

Sync with the original.

A maintainer's e-mail address changed.

``Original revision'' fields are changed to synchronize with
the original handbook.

Add a missing "the".

Correction of mistranslated sentences.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Remove some duplicated text. Closes PR# 2798.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Also mention that ports should not really use the 199506 value of BSD
to distinguish amount versions of FreeBSD before and after the Lite2
merge.

Mention that the value of the BSD macro for 4.4BSD-Lite2 is 199506.

Sync with the original.
Submitted by: iwasaki@jp.FreeBSD.ORG

Sync with the revision 1.6 of original cvsup.sgml.
Submitted by: iwasaki@jp.FreeBSD.ORG

Revert $FreeBSD$ back to $Id$

Clean up a rather incorrectly phrased
set of instructions on lndir usage.

Add a section describing the available CVSup collections. I'm not
wild about the way it looks, but at least the information is there.

Split the "Obtaining FreeBSD" appendix into four sections, for
CD-ROM, FTP, CTM, and CVSup. Adjust cross-references accordingly.
Add a list of CVSup mirror sites, and reference it from the CVSup
tutorial.

Also, fix a spelling error in the porting document.

Update the ``Original revision:'' fields and fix the typo of translation date
in install.sgml

Fix the rawrite.exe URL.

Fix the url for rawrite.exe.

Latest release is 2.1.7.
Someone who knows Japanese ought to update the date.

Latest release is 2.1.7.

Sync with the original(merge the changes in 1.212 - 1.216 of original
handbook).

Sync with the original

Typo fix. Closes PR#2753.

Submitted by: Stephen J. Roznowski <sjr1@flash.net>

Add Kenneth Monville for his xalarm port.

Oops! I've forgotten to sync "Original revision:" field.

Sync with the original.

Sync with the original.

Sync with original contrib.sgml

Sync with original authors.sgml

Cosmetic changes for better HTML output.

Lowercase file name for contents. All other directories (psd, smm, usd)
use the file name "contents".

Reviewed by:
Submitted by:
Obtained from:

Update my pgp key

Added:
Hung-Chi Chu <hcchu@r350.ee.ntu.edu.tw> - big5con port
Justin M. Seger <jseger@scds.ziplink.net> - bing port

Opps! Forgot to add Jordan K. Hubbard for his xspringies port.

Update my pgp key.

Update my PGP key (two new sigs). Being at it, fix up jmb's entry,
you can't use &a.foo; inside <verb>, apparently.

Also claim Usenet Support as my `area', now that i'm doing it
anyway...

Added Kiroh HARADA for his gn-gnspool port.

Add jdp's pgp key.
I will sync up -2.2 to this point (except Id->FreeBSD).

Reviewed by:
Submitted by:
Obtained from:

Merge 1.209 -> 1.210 changes.

Merge 1.61 -> 1.62 changes.

Typo fix.

Merge 1.4 -> 1.5 changes.
Submitted by: iwasaki@jp.freebsd.org

Merge 1.206 -> 1.209 changes.

Do what i usually forget to do:

Add John-Mark Gurney (jmg@FreeBSD.org) to the list of committers.

Add Jeffrey Wheat and Paulo Menezes for their ports.

Swap news editors to reflect reality. :)

Add Guido van Rooij to core team.

Merge 1.59 -> 1.61 changes.
Submitted by: simokawa@jp.freebsd.org

whoops! wosch was right! my sources were out of date and this
change is bogus! heh heh. [slinks away].

Delete old (and redundant) machine depend code.

vfontedpr would appear to be in /usr/bin not /usr/libexec?

Merge 1.25 -> 1.26 changes.

Merge 1.203 -> 1.206 chages.

Merge 1.55 -> 1.57 changes.

Properly credit the name of translator.

Updates for the 2.1.7-to-be.
Submitted-By: pds

Correct some of my grammer.

Add a link to the quota section in the "OPTION QUOTAS" section.

Heh heh.. :-} Whoops, put this list back the way it belongs without
all the stuff inserted in the wrong place.

Added my own name to the list of developers.

Eliminate the position of President from the roster.

Commit the mailing list charter changes.

Add the condition !defined(USG) to the logic to include <sys/param.h>
There is still some debate if this is yet the proper way to handle
<sys/param.h>, but this is certainly closer than what I had to start with.

Submitted by: Warner Losh <imp@village.org>

Add Danny to the handbook. Wind up them expectations 8)

Talk about foreign filesystems.
Submitted-By: pds

Update the installation section for the current version of CVSup. List
the German distribution site.

Merge 1.202->1.203 changes.

Add Martin Cracauer to FreeBSD Developers list.

Forgotten by: JKH

Submitted by: Frank Durda IV <uhclem@nemesis.lonestar.org>
Fixed some typos and improved a few descriptions over my first revision.

Add the missing ``"'' ro url=. It seems my mail do -doc didn't get though.

More fixes and an update to the ZIP section.

Submitted-By: pds

Talk about ZIP drives.
Fix a typo.
Submitted-By: pds

Merge 1.46 -> 1.47 changes.

Straighten out Portugal and Russia.

Merge 1.45 -> 1.46 changes.

Merge 1.201 -> 1.202 changes.

Change Brent J. Nordquist's e-mail address.

Submitted by: "Brent J. Nordquist" <bjn@visi.com>

Add 3rd Russian mirror

Document the "#if (defined(__unix__) || defined(unix))" way of including
sys/param.h. Change _HAVE_PARAM_H to "HAVE_SYS_PARAM_H" for those who
still like this method -- leading underscores are in the compiler/library
name space and the Ollivier says to follow GNU Autoconf anyway.

Answer some recently asked questions.
Submitted-By: pds

Added Tsuyoshi Maruyama to the translator list for doing some work for
translating dialout.sgml.

Merge 1.46 -> 1.49 changes.
Submitted by: Mitsuru Iwasaki <iwasaki@pc.jaring.my>

Finally, fill this file with real content (the translation is completed.).
Submitted by: FreeBSD Japanese Documentation Project

Add a section for FreeBSD-specific works.

Adaptex 1535 and 2980U are supported.

Merge 1.199 -> 1.201 changes.

Merge 1.52->1.55 changes.

Make this list in alphabetical order again.

Added a comment at the top to remind committers keep this list in
alphabetical order.

Note that Adaptec 1505 is also supported.
Pointed-Out-By: Doug White and Danie Van Heerden

Add Kazutaka YOKOTA to committers list.

Add Darren Reed and Tor Egge to developers list.

Merge 1.4 -> 1.8 changes.
Submitted by: Mihoko TANAKA <mihoko@pa.yokogawa.co.jp> and
The Japanese Documentation Project

Merge 1.10 -> 1.12 changes.

Added a newline at the end of file.
Reviewed by:
Submitted by:
Obtained from:

Merge 1.15 -> 1.16 changes.

Merge 1.7 -> 1.8 changes.

Merge 1.191 -> 1.199 changes.

Merge 1.48 -> 1.52 changes.

Make this list in alphabetical order by entity names again.

Rename a.brian to a.handy and a.briansomers to a.brian

Close PR#2522 - wrong reference to 2.1.5.

Oh look - it's alphabetical too....... if at first you don't succeed...
Reviewed by: None
Submitted by: Brian Somers <brian@awfulhak.demon.co.uk>
Obtained from: Brian Somers <brian@awfulhak.demon.co.uk>

Get it right - the a.name is a reference to the contrib file entry... and
"a.brian" is already used. It's now a.briansomers
Reviewed by: None
Submitted by: Brian Somers <brian@awfulhak.demon.co.uk>
Obtained from: Brian Somers <brian@awfulhak.demon.co.uk>

`Zimmermann' has 2 `n's in it.

Submitted by: Ulf Zimmermann

Added myself to the handbook - as per Joerg's suggestion.
Reviewed by: None
Submitted by: Brian Somers <brian@awfulhak.demon.co.uk>
Obtained from: Brian Somers <brian@awfulhak.demon.co.uk>

Add jmb's key.

Break this section into two chapters. I suppose this also means that
this should be two files (staff.sgml and contrib.sgml), but I didn't want
to get that radical for a first step.

Fix assorted references, update text.

Adjust some broken links for news/mail information.

Add Jonathan Bresler to the core team - welcome, Jon!

Add John Polstra to the core team. Welcome to the core team, John!

In later news, Mr. Dyson and Mr. Polstra will be debating the use of
the given name "John" in our mailing lists. :-)

Merge 1.57 -> 1.59 changes. (No actual change in the contents.)

Bump the revision number in the Original revision: line by one iafter
all $Id$ changed to $FreeBSD$.

$Id$ was missing in this file. So added $FreeBSD$ (whatever that could
give you.)

Latest fixes for the psm mouse device, also updates the docs
to reflect the new options etc..

Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>

I recently tried to install over passive FTP, and found it difficult to
understand how to do it from the handbook. I suggest the following
re-wording and extension to make it clearer.

Submitted-By: Eivind Eklund <eivind@dimaga.com>

Some fixes to make some of the examples in
the mail section come out right, along with some
typo corrections.

Submitted by: Phillippe Charnier <charnier@xp11.frmug.org>

Rearrange the documentation project roster a little more.

Back out rev. 1.58.

Sigh, OK, now the release map looks right.

Unsmash my $Id$.

Do a better job with my ASCII artwork.

Update the FAQ using some of Peter's text and some of my own.
Submitted-By: pds & jkh

$Id$ -> $FreeBSD$ in samples.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Merge the en version changes made in 1.58 -> 1.61.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Typo police.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Merge the en version changes made in 1.4 -> 1.5.

Some Translation improvement.

Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Merge the en version changes made in 1.52 -> 1.56.

Merge the en version change made in 1.189 -> 1.190.

Add Luigi Rizzo, who was inadvertently left out.

Merge the en version changes made in 1.188 -> 1.189.

Add Simon Marlow for his cgoban port.

Merge the en version changes made in 1.174 -> 1.188.

Merge the en version changes made in 1.45 -> 1.47.

Move some lines to make the list in alphabetical order by the entity name.

Typo fix, and translation improvement.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Merge the en version changes made in 1.4 -> 1.5.
(No actual change in the translation.)

Added two useful URL's.

Updated the Pentium chipset descriptions as suggested by Rodney Grimes.

Submitted by: Rodney Grimes

Correct entity entry for Ricardo AG, make him the primary contact
for gallery entries.

Change Brian Tao's mail address from taob@io.org to
taob@risc.org as requested (It looks like Nate forgot or
didn't know about this one, or I just jumped the gun
and got to it before he did :-).

Submitted by: Brian Tao <taob@risc.org>

Get rid of all those annoying warnings when making the
handbook. Closes PR# 2375.

Submitted by: William Lloyd <wlloyd@mpd.ca>

Various changes submitted by the original author.
Closes PR# 2372.

Reviewed by: The spelling police
Submitted by: William Lloyd <wlloyd@mpd.ca>

Merge the en version change made in 1.14 -> 1.15.

Fix some spelling errors.

Change an incorrect path name.

Submitted by: Sean Kelly

Added Tor Egge to contributor's list

Added proff@suburbia.net (Julian Assange) for doing strobe port.

pkg/DISPLAY -> pkg/MESSAGE

Reported by: Kiriyama Kazuhiko <kiri@kiri.toba-cmt.ac.jp>

Oops, there was a ] I forgot to erase.

Change wording of MAN?PREFIX description.

A collection of spelling fixes and minor grammar corrections.

Safe for 2.2.

Merge the en version changes made in 1.22 -> 1.23.

Merge the en version changes made in 1.8 -> 1.9.

Fixed cgi URL from /cgi-bin/ to /cgi/.

Fixed cgi URLs from /cgi-bin/ to /cgi/.

Merge the en version changes made in 1.43 -> 1.44.

Correct the URL for ftp3.uk.freebsd.org.
Obtained from: freebsd-doc mailing list

Merge the en version changes made in 1.34 -> 1.39.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Correct the send-pr text to make a little more sense.

Refer the reader to intro(9) and style(9) so that
they are aware that we do have some coding style
guidelines.

Use &dollar;Id&dollar; instead of $Id$ in the template of BSD-style
copyright statement, so that this line won't be changed everytime
this file is updated.

Spelling police.

Merge the en version changes made in 1.6 -> 1.7.

Merge the en version changes made in 1.19 -> 1.20.

Merge the en version changes made in 1.13 -> 1.14.

Standardize the header.

Merge the en version changes made in 1.18 -> 1.20.

Typo.

Back out one change of doesn't -> does not, as it was message from bsd.port.mk
and is really "doesn't" instead of "does not".

Merge the en version changes made in 1.8 -> 1.9.

Merge the en version changes made in 1.3 -> 1.4.

Merge the en version changes made in 1.13 -> 1.14.

Merge the en version changes made in 1.2 -> 1.4.

Typo.

Convert a couple of PRINTER usages to PRINTERDEVICE
in the usd makefiles.

Closes PR# 2357.

Submitted by: Philippe Charnier

Merge the en version changes made in 1.23 -> 1.24.

Merge the en version changes made in 1.8 -> 1.9.

Merge the en version changes made in 1.44 -> 1.45.

Merge the en version changes made in 1.57 -> 1.58.

Merge the en version changes made in 1.14 -> 1.15.

Merge the en version changes made in 1.14 -> 1.15.

Standardize the header.

Merge the en version changes made in 1.2 -> 1.3.

Merge the en version chages made in 1.16 -> 1.17.

Merge the en version changes made in 1.12 -> 1.13.

Standardize the header.

Add Alan Cox <alc@cs.rice.edu> as a contributor.

Documented MANPREFIX and MAN%cPREFIX (where %c=[1-9LN]).

[my wording is probably awkward, if a wordsmith is bored perhaps they
could take a look at this]

Make the bug reporting reference point to the send-pr page.

Avoid the use of contractions. This eliminates the "its"/"it's" problems
pointed out by Rick Robinson. Found and fixed some grammar problems
at the same time.

Note: the reason for avoiding contractions is two-fold:

1) It makes the text easier to understand for people who speak English
as a second language.
2) Expanding the contractions often reveals poorly worded passages.

Merge the en version changes made in 1.51 -> 1.52.

Bug workaround. (<label> in <header> has to be after text)

Merge the en version changes made in 1.1 -> 1.2.
(No real change. Only the Original revision: line is changed.)

Now, the translation for this file is done.
Submitted by: The FreeBSD Japanese Documentation Project
Translated by: Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>

Remove &a.jvh, &a.proven.
(They have cvs checkout privilege, but don't have commit privilege.)
Pointed-out by: jorge

Added &a.proven, &a.jvh, &a.mbarkah and &a.nsj to the developer list.
Also, sort the developer list.

Typo.

Merge the en version changes made in 1.44 -> 1.45.

Sort this file in alphabetical order of the entity.

Merge the en version changes made in 1.12 -> 1.13.

add name to postscript printer filter script

Merge the en version changes made in 1.53 -> 1.57.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Merge the en version changes made in 1.22 -> 1.23.

Merge the en version change made in 1.50 -> 1.51.
(No change beside the original revision line.)

Typo.

Merge the en version changes made in 1.49 -> 1.50.

Changed the comment about RCS ID in the sample Makefile.
(I see more than a few port submission with no $Id$ line in its Makefile
lately. And I guess this comment may be somehow misleading.)

The translation has been completed. Replacing the empty file with file with
real contents.
Submitted by: The FreeBSD Japanese Documentation Project
Translated by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Added Conrad Sabatier for his port of xless

Merge the en version changes made in 1.4 -> 1.6.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Merge the en version changes made in 1.21 -> 1.22.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Merge the en version changes made in 1.42 -> 1.44.
Submitted by: Mitsuru IWASAKI <iwasaki@pc.jaring.my>

Merge the en version changes made in 1.28 -> 1.29.
Submitted by: Yukinori Maeda <yuki@zephyr.elcom.nitech.ac.jp>

Merge the en version changes made in 1.42 -> 1.43.

Submitted by: Tomoo WATANABE <tomo@maple.elcom.nitech.ac.jp>

Been reading more of Rodney HW emails.

Cut and paste info about the 430VX chipset from some of Rodney's old
fbsd-hw emails.

Added "ie. 430FX" for Triton and "ie. 430HX" for Triton-II.
(this is correct, right? also, does anyone know what the 430VX
chipset used in the ASUS P55TVP4 is?)
Intel's URL for the VS440FX has changed.

Spelling police.

Request from Sascha to change his e-mail address. His old reply-to
address isn't valid anymore.
Reviewed by:
Submitted by:
Obtained from:

Phillips -> Philips

Noted-By: some really pedantic person. :)

Some translation improvement.

Merge the en version chnages made in 1.41 -> 1.42.
Submitted by: Tomoo WATANABE <tomo@maple.elcom.nitech.ac.jp>

corrected Sascha's Mail address. Thanks Joerg for your ,sharp eyes' !

Added kernelopts.sgml to SRCS.

Merge the en version changes made in 1.63 -> 1.64.
Submitted by: Takashi Saeki <saeki@saskg.semicon.sony.co.jp>

Merge the en version changes made in 1.19 -> 1.20.

Fixed sgml errors.

Add an empty file till the translation is completed.

Added Sascha Blank <blank@sliphost37.uni-trier.de> as FreeBSD
contributor because of his valuable bugfix to pgcc-current, which
allows usage of optimization levels >= 3.

Some translation improvement.
Submitted by: Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>

Add my description for how to add a new-style kernel option, including
Bruce's comments.

Add Mikhail Teterin for his jbig port.

Added Charles Mott <cmott@srv.net> for his packet aliasing code in User-PPP.

Forgotten by: jkh

Add Decision-Computer Intl cards to list of supported serial cards.
Submitted-By: jhs

Merge en version changes made in 1.17 -> 1.18.

Some translation inprovement.

Removed a reference to pkg_manage(1).

Typo fix. Closes PR#2259.

Submitted by: John-Mark Gurney <jmg@nike.efn.org>

Update info about Russian mirrors

Peter's first cut at updating the FAQ.
Submitted-By: pds

Added cvsup.sgml to SRCS.

Merge en version changes made in 1.18 -> 1.19.

Add an empty file for now till the translation for this file is completed.

Merge the en version changes made in 1.43 -> 1.44.

Merge the en version changes made in 1.6 -> 1.7.

Collapse one level of sectioning - both John and I agree that it is
too much.

Correct speling errurz.

Add new Documentation Project authors (made a hopeless attempt to
sort this file in the process, gave up).

Add section in whos-who for Doc project.

Move John Lind's author tag to a.jlind since we try to keep it as
a.<freefallusername> whenever possible, and "john" is now assigned.