- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Avoid magic constant.
No functional change.

o TxD ring requires 8 bytes alignment to work so change alignment
constraint to 8. Previously it may have triggered watchdog
timeouts.
o Check whether interrupt is ours or not.
o Enable interrupts before attemping to transmit queued packets.
This will slightly improve TX performance.
o No need to clear IFF_DRV_OACTIVE in a loop. AE_FLAG_TXAVAIL is
used to know whether there are enough available TxD ring space.
o Added missing bus_dmamap_sync(9) in ae_rx_intr() and rearranged
code to avoid unncessary register access.
o Make sure to clear TxD, TxS, RxD rings in driver initialization.
Otherwise some data in these rings could be interpreted as
'updated' which in turn will advance internally maintained
pointers and can trigger watchdog timeouts.

PR: kern/180382

Fix the build.

Check the return value of pci_find_cap()

To send a frame, controller requires a prepended TX header and
the length of frame should be treated as multiple of 4. Actual
frame length is set in the TX header. The TX header position
should be aligned on 4 byte boundary and actual frame start
position should be aligned on 4 byte boundary as well. This means
we need 4(TX header length) + 3(frame length fixup) additional free
space in TX buffer in addition to actual frame length.
Make sure TX handler check these additional bytes.
ae_tx_avail_size() returns actual free space in TX buffer to ease
the calculation of available TX buffer space in caller. While I'm
here, replace magic number to appropriate sizeof operator to
enhance readability.

This change should fix controller lockup issue happened under
certain conditions but it still does not fix watchdog timeout. It
seems the watchdog timeout is side-effect of TxS and TxD
mismatches. The root cause of TxD/TxD mismatch is not known yet but
it looks like silicon bug. I guess driver may have to reinitialize
controller whenever it sees TxS and TxD mismatches but leave it as
it was at this moment.

PR: kern/145918

- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
it might provide useful for debugging). For most mii(4) drivers it
was unclear whether the PHYs driven by them actually support
loopback or not. Moreover, typically loopback mode also needs to
be activated on the MAC, which none of the Ethernet drivers using
mii(4) implements. Given that loopback media has no real use (and
obviously hardly had a chance to actually work) besides for driver
development (which just loopback mode should be sufficient for
though, i.e one doesn't necessary need support for loopback media)
support for it is just dropped as both NetBSD and OpenBSD already
did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
instead of discrete function pointers, and extend this to include
a "reset" entry point. Make sure any PHY-specific reset routine is
always used, and provide one for lxtphy(4) which disables MII
interrupts (as is done for a few other PHYs we have drivers for).
This includes changing NIC drivers which previously just called the
generic mii_phy_reset() to now actually call the PHY-specific reset
routine, which might be crucial in some cases. While at it, the
redundant checks in these NIC drivers for mii->mii_instance not being
zero before calling the reset routines were removed because as soon
as one PHY driver attaches mii->mii_instance is incremented and we
hardly can end up in their media change callbacks etc if no PHY driver
has attached as mii_attach() would have failed in that case and not
attach a miibus(4) instance.
Consequently, NIC drivers now no longer should call mii_phy_reset()
directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
The purpose of that function is to perform the common steps to attach
a PHY driver instance and to hook it up to the miibus(4) instance and to
optionally also handle the probing, addition and initialization of the
supported media. So all a PHY driver without any special requirements
has to do in its bus attach method is to call mii_phy_dev_attach()
along with PHY-specific MIIF_* flags, a pointer to its PHY functions
and the add_media set to one. All PHY drivers were updated to take
advantage of mii_phy_dev_attach() as appropriate. Along with these
changes the capability mask was added to the mii_softc structure so
PHY drivers taking advantage of mii_phy_dev_attach() but still
handling media on their own do not need to fiddle with the MII attach
arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
structure. Several PHY drivers require this information also after
attaching and previously had to wrap their own softc around mii_softc.
NetBSD/OpenBSD also keep track of the model and revision on their
mii_softc structure. All PHY drivers were updated to take advantage
as appropriate.
- Convert the mebers of the MII data structure to unsigned where
appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
when mapping an OUI to the MII ID registers. All PHY drivers and
miidevs where changed as necessary. Actually this now again allows to
largely share miidevs with NetBSD, which fixed this problem already
9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
weren't explicitly converted to support flow control before. It's
unclear whether flow control actually works with these but typically
it should and their net behavior should be more correct with these
changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from: NetBSD (partially)
Reviewed by: yongari (earlier version), silence on arch@ and net@

Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.

sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.

Commit the rest of the devices.

Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by: yongari
MFC after: 1 month

Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
addresses; we now let mii_attach() only probe the PHY at the desired
address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
off from, partly even based on grabbing and using the softc of the
parent; we now pass these flags down from the NIC to the PHY drivers
via mii_attach(). This got us rid of all such hacks except those of
brgphy() in combination with bce(4) and bge(4), which is way beyond
what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by: jhb, yongari

Remove unnecessary controller reinitialization.

PR: kern/87506

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

Don't panic on attach if we can't allocate ifp

Approved by: ed (mentor)
MFC after: 2 weeks

Small spelling fix, "Ethetnet" -> "Ethernet"

Approved by: ed (mentor)
MFC after: 1 week

Fix multicast handling. All Atheros controllers use big-endian form
in computing multicast hash.

PR: kern/139137

Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.

Add necessary include.

Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by: re (kib)
MFC after: 6 weeks

detach doesn't return an unsinged int, but returns an int.

- Eliminate unused variable. [1]
- Check for runt frames entering the stack. [2]

Suggested by: ganbold[1], yongari[2]
Approved by: kib (mentor)
MFC after: 2 weeks

- Add driver for Attansic L2 FastEthernet controller found on
Asus EeePC and some Asus mainboards.

Reviewed by: yongari, rpaulo, jhb
Tested by: many
Approved by: kib (mentor)
MFC after: 1 week