- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add descriptions to the FILES list, fix some mdoc complaints, move the
"neither" entry out of the table in BOOTING.

Submitted by: joeld
Reviewed by: joeld
MFC after: 1 week

Add a new gptboot(8) man page. Factor out the redundant information
in gpart(8) and boot(8), adding references to gptboot(8) in both.

Reviewed by: jhb, ae, pjd, Paul Schenkeveld <bsdcan@psconsult.nl>, david_a_bright@dell.com (portions), gjb
MFC after: 1 week

add detection of serial console presence to btx and boot2-like blocks

Note that this commit slightly increases size of boot blocks.

Reviewed by: jhb
Tested by: Olivier Cochard-Labbe <olivier@cochard.me>
MFC after: 26 days

Use 32-bit ufs_ino_t instead of ino_t to keep boot2 small and prevent
unnecessary 64-bit math on 32-bit machines.

Sponsored by: Google Summer of Code 2011

Define several extra macros in bsd.sys.mk and sys/conf/kern.pre.mk, to
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.

Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)

As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:

CC=clang
CXX=clang++
CPP=clang-cpp

MFC after: 2 weeks

Look for /boot/config in addition to /boot.config, with the former taking
precedence over the latter if it exists.

MFC after: 3 weeks

gpt/zfs boot blocks: reduce optimizing CFLAGS to -O1

gpt and zfs boot blocks are not nearly as size-constrained as boot2
from which they inherited their current optimization and anti-optimization
options. As such the current options do not provide any benefit, but
make debugging of the code much harder.
Also, it has been demonstrated that combination of -mrtd and
-fno-unit-at-a-time may result in mis-compilation of the boot code
with the current base gcc.

Additionally, intermediate assembly file filtering is removed for
zfsboot.

The new boot blocks are all compile- and boot- tested using qemu.
gptzfsboot is tested with real hardware.

Reported by: Peter Jeremy <peterjeremy@acm.org> [miscompilation]
Discussed with: bde, jhb
Tested by: Sebastian Chmielewski <chmielsster@gmail.com> [gptzfsboot]
Approved by: re (kib)
MFC after: 3 weeks

Remove all object files during 'make clean'.

PR: kern/154888
Submitted by: arundel
MFC after: 1 week

Clang's integrated assembler can now handle sys/boot/i386/boot2/sio.S.
It used to choke on the notation "inb (%dx),%al" for "inb %dx,%al"; GNU
as accepts both forms. Which notation is more 'correct' is an open
question. :)

Upgrade our copy of llvm/clang to r126079, from upstream's trunk.

This contains many improvements, primarily better C++ support, an
integrated assembler for x86 and support for -pg.

Remove superfluous -mno-(mmx|3dnow|sse|sse2|sse3) flags in Makefiles
under sys/boot/{i386,pc98}, since these are already added via
sys/boot/{i386,pc98}/Makefile.inc.

Submitted by: arundel

Ensure that a make from sys/boot does not pick up include files from
/usr/include.

Discussed with: kib

- Split code shared by almost any boot loader into separate files and
clean up most layering violations:

sys/boot/i386/common/rbx.h:

RBX_* defines
OPT_SET()
OPT_CHECK()

sys/boot/common/util.[ch]:

memcpy()
memset()
memcmp()
bcpy()
bzero()
bcmp()
strcmp()
strncmp() [new]
strcpy()
strcat()
strchr()
strlen()
printf()

sys/boot/i386/common/cons.[ch]:

ioctrl
putc()
xputc()
putchar()
getc()
xgetc()
keyhit() [now takes number of seconds as an argument]
getstr()

sys/boot/i386/common/drv.[ch]:

struct dsk
drvread()
drvwrite() [new]
drvsize() [new]

sys/boot/common/crc32.[ch] [new]

sys/boot/common/gpt.[ch] [new]

- Teach gptboot and gptzfsboot about new files. I haven't touched the
rest, but there is still a lot of code duplication to be removed.

- Implement full GPT support. Currently we just read primary header and
partition table and don't care about checksums, etc. After this change we
verify checksums of primary header and primary partition table and if
there is a problem we fall back to backup header and backup partition
table.

- Clean up most messages to use prefix of boot program, so in case of an
error we know where the error comes from, eg.:

gptboot: unable to read primary GPT header

- If we can't boot, print boot prompt only once and not every five
seconds.

- Honour newly added GPT attributes:

bootme - this is bootable partition
bootonce - try to boot from this partition only once
bootfailed - we failed to boot from this partition

- Change boot order of gptboot to the following:

1. Try to boot from all the partitions that have both 'bootme'
and 'bootonce' attributes one by one.
2. Try to boot from all the partitions that have only 'bootme'
attribute one by one.
3. If there are no partitions with 'bootme' attribute, boot from
the first UFS partition.

- The 'bootonce' functionality is implemented in the following way:

1. Walk through all the partitions and when 'bootonce'
attribute is found without 'bootme' attribute, remove
'bootonce' attribute and set 'bootfailed' attribute.
'bootonce' attribute alone means that we tried to boot from
this partition, but boot failed after leaving gptboot and
machine was restarted.
2. Find partition with both 'bootme' and 'bootonce' attributes.
3. Remove 'bootme' attribute.
4. Try to execute /boot/loader or /boot/kernel/kernel from that
partition. If succeeded we stop here.
5. If execution failed, remove 'bootonce' and set 'bootfailed'.
6. Go to 2.

If whole boot succeeded there is new /etc/rc.d/gptboot script coming
that will log all partitions that we failed to boot from (the ones with
'bootfailed' attribute) and will remove this attribute. It will also
find partition with 'bootonce' attribute - this is the partition we
booted from successfully. The script will log success and remove the
attribute.

All the GPT updates we do here goes to both primary and backup GPT if
they are valid. We don't touch headers or partition tables when
checksum doesn't match.

Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 2 weeks

MF tbemd: Minor tweaks, prefer MACHINE_CPUARCH generally to MACHINE_ARCH

Our boot loader is capable of booting both i386 and amd64 kernels so
call it "x86" instead of "i386".

Suggested by: jhb in response to Alexander Best's loader proposal
MFC after: 1 month

Fix a confusing typo in the EDD packet structure used in gptboot and
gptzfsboot. I got the segment and offset fields reversed in the structure,
but I also succeeded in crossing the assignments so the actual EDD packet
ended up correct.

MFC after: 1 week

Fix parse() so that the partition to boot (load /boot/loader) from can
be set. The syntax as printed in main() is used: 0:ad(0p3)/boot/loader

Reviewed by: jhb
Approved by: re (kib)

- Initialize the vm86 structure to a known-good state. Specifically, always
set the %eflags used during a BIOS call via BTX to 0x202. Previously
the flags field was uninitialized garbage, and thus it was "random" if
interrupts were enabled or not during BIOS calls.
- Use constants from <machine/psl.h> for fields in %eflags.

MFC after: 3 days

Rev 1.72 fixed a bug where if /boot.config changed the console its contents
weren't displayed on the new console. However, the config string has been
altered as part of being parsed so we only display the first option. Fix
this by saving a copy of /boot.config before parsing it and displaying the
saved copy after parsing.

MFC after: 1 week
PR: i386/103972
Submitted by: Alexandre Belloni alexandre.belloni of netasq.com

Add a note to indicate that these files do borrow in part from mbr.s and
boot1.S

Requested by: rnordier

Use the smaller cgbase() macro in ufsread.c if UFS_SMALL_CGBASE is
defined. This lets each boot program choose which version of cgbase() it
wants to use rather than forcing ufsread.c to have that knowledge.

MFC after: 1 week
Discussed with: imp

Add . to the include path so that we follow the 'machine' symlink we create
during depend on amd64.

Reported by: rwatson

First cut at support for booting a GPT labeled disk via the BIOS bootstrap
on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.

MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)

Slightly cleanup the 'bootdev' concept on x86 by changing the various
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.

MFC after: 1 week

Tweak inlining parameters a little. Add warning to tell us if function
we declared as inline can not be inlined.

Revert the last change. Masking only 2 MSBs of the virtual address
to get the physical address doesn't work for all values of KVA_PAGES,
while masking 8 MSBs works for all values of KVA_PAGES that are
multiple of 4 for non-PAE and 8 for PAE. (This leaves us limited
with 12MB for non-PAE kernels and 14MB for PAE kernels.)

To get things right, we'd need to subtract the KERNBASE from the
virtual address (but KERNBASE is not easy to figure out from here),
or have physical addresses set properly in the ELF headers.

Discussed with: jhb

Because the BTX mini-kernel now uses flat memory mode and clients
are no longer limited to a virtual address space of 16 megabytes,
only mask high two bits of a virtual address. This allows to load
larger kernels (up to 1 gigabyte). Not masking addresses at all
was a bad idea on machines with less than >3G of memory -- kernels
are linked at 0xc0xxxxxx, and that would attempt to load a kernel
at above 3G. By masking only two highest bits we stay within the
safe limits while still allowing to boot larger kernels.

(This is a safer reimplmentation of sys/boot/i386/boot2/boot.2.c
rev. 1.71.)

Prodded by: jhb
Tested by: nyan (pc98)

Restore support for -c and -d that were treacherously murdered in
rev. 1.58. (This only costs us four bytes.)

Prodded by: bde
MFC after: 3 days

Back out rev. 1.71 as it breaks directly loading (i386) kernels.

OK'ed by: jhb
PR: i386/96430, i386/104709
MFC after: 3 days

Consistently use OPT_* macros to test/set boot options.

Re-implement rev.1.76 with respect to the code size.

Backout previous commit - for some reason it overflows space constrains on
amd64. Better version will follow.

Add new option `q', which makes second stage loader quiet unless autoboot
is disabled or fails.

MFC after: 1 week

- RBX_MASK wasn't updated when RB_PAUSE was changed from 0x40000
to 0x100000 in rev. 1.67.

- NOPT wasn't updated (decremented) in previous revision.

Add the ability to specify the boot2 serial console speed in
/boot.config or on the "boot:" prompt line via a "-S<speed>" flag,
e.g. "-h -S19200". This adds about 50 bytes to the size of boot2
and required a few other small changes to limit the size impact.
This changes only affects boot2; there are further loader changes
to follow.

The kernel is usually at /boot/kernel/kernel nowadays.

PR: i386/81756
Submitted by: trasz <trasz@buziaczek.pl>

Add -mno-sse3 for prescott/nocona

Print out the commands from /boot.config after parsing them so that they
output is sent to the correct console(s).

PR: kern/66425
Submitted by: Gavin Atkinson gavin at ury dot york dot ac dot uk
MFC after: 1 week

Ensure GCC does not use FP registers in integer code.
I think all we really need is -fno-sse2.
I really don't like cluttering up the compiler invocation,
but this bigger hammer will fix reported problems for now.

A long, long time ago in a CVS branch far away (specifically, HEAD prior
to 4.0 and RELENG_3), the BTX mini-kernel used paging rather than flat
mode and clients were limited to a virtual address space of 16 megabytes.
Because of this limitation, boot2 silently masked all physical addresses
in any binaries it loaded so that they were always loaded into the first
16 Meg. Since BTX no longer has this limitation (and hasn't for a long
time), remove the masking from boot2. This allows boot2 to load kernels
larger than about 12 to 14 meg (12 for non-PAE, 14 for PAE).

Submitted by: Sergey Lyubka devnull at uptsoft dot com
MFC after: 1 month

B1FLAGS -> BOOT_BOOT1_FLAGS, which is consistent with
naming of other boot-related make vars.

Compile boot2 with -fno-unit-at-a-time. GCCs aggressive optimization
breaks boot in spectacular ways otherwise.

Clean up local memcpy implementation to take void * parameters.

Define our own memcpy here instead of relying on GCC to provide one.

These are changes to allow to use the Intel C/C++ compiler (lang/icc)
to build the kernel. It doesn't affect the operation if gcc.

Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as
icc v8 may define __GNUC__ some parts may look strange but are
necessary.

Additional changes:
- in_cksum.[ch]:
* use a generic C version instead of the assembly version in the !gcc
case (ASM code breaks with the optimizations icc does)
-> no bad checksums with an icc compiled kernel
Help from: andre, grehan, das
Stolen from: alpha version via ppc version
The entire checksum code should IMHO be replaced with the DragonFly
version (because it isn't guaranteed future revisions of gcc will
include similar optimizations) as in:
---snip---
Revision Changes Path
1.12 +1 -0 src/sys/conf/files.i386
1.4 +142 -558 src/sys/i386/i386/in_cksum.c
1.5 +33 -69 src/sys/i386/include/in_cksum.h
1.5 +2 -0 src/sys/netinet/igmp.c
1.6 +0 -1 src/sys/netinet/in.h
1.6 +2 -0 src/sys/netinet/ip_icmp.c

1.4 +3 -4 src/contrib/ipfilter/ip_compat.h
1.3 +1 -2 src/sbin/natd/icmp.c
1.4 +0 -1 src/sbin/natd/natd.c
1.48 +1 -0 src/sys/conf/files
1.2 +0 -1 src/sys/conf/files.amd64
1.13 +0 -1 src/sys/conf/files.i386
1.5 +0 -1 src/sys/conf/files.pc98
1.7 +1 -1 src/sys/contrib/ipfilter/netinet/fil.c
1.10 +2 -3 src/sys/contrib/ipfilter/netinet/ip_compat.h
1.10 +1 -1 src/sys/contrib/ipfilter/netinet/ip_fil.c
1.7 +1 -1 src/sys/dev/netif/txp/if_txp.c
1.7 +1 -1 src/sys/net/ip_mroute/ip_mroute.c
1.7 +1 -2 src/sys/net/ipfw/ip_fw2.c
1.6 +1 -2 src/sys/netinet/igmp.c
1.4 +158 -116 src/sys/netinet/in_cksum.c
1.6 +1 -1 src/sys/netinet/ip_gre.c
1.7 +1 -2 src/sys/netinet/ip_icmp.c
1.10 +1 -1 src/sys/netinet/ip_input.c
1.10 +1 -2 src/sys/netinet/ip_output.c
1.13 +1 -2 src/sys/netinet/tcp_input.c
1.9 +1 -2 src/sys/netinet/tcp_output.c
1.10 +1 -1 src/sys/netinet/tcp_subr.c
1.10 +1 -1 src/sys/netinet/tcp_syncache.c
1.9 +1 -2 src/sys/netinet/udp_usrreq.c

1.5 +1 -2 src/sys/netinet6/ipsec.c
1.5 +1 -2 src/sys/netproto/ipsec/ipsec.c
1.5 +1 -1 src/sys/netproto/ipsec/ipsec_input.c
1.4 +1 -2 src/sys/netproto/ipsec/ipsec_output.c

and finally remove
sys/i386/i386 in_cksum.c
sys/i386/include in_cksum.h
---snip---
- endian.h:
* DTRT in C++ mode
- quad.h:
* we don't use gcc v1 anymore, remove support for it
Suggested by: bde (long ago)
- assym.h:
* avoid zero-length arrays (remove dependency on a gcc specific
feature)
This change changes the contents of the object file, but as it's
only used to generate some values for a header, and the generator
knows how to handle this, there's no impact in the gcc case.
Explained by: bde
Submitted by: Marius Strobl <marius@alchemy.franken.de>
- aicasm.c:
* minor change to teach it about the way icc spells "-nostdinc"
Not approved by: gibbs (no reply to my mail)
- bump __FreeBSD_version (lang/icc needs to know about the changes)

Incarnations of this patch survive gcc compiles since a loooong time,
I use it on my desktop. An icc compiled kernel works since Nov. 2003
(exceptions: snd_* if used as modules), it survives a build of the
entire ports collection with icc.

Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.

Reviewed by: -arch
Submitted by: netchild

Re-add sio.S, and properly deal with assembler files.

Repocopied by: joe

- Factor out -nostdlib to an upper level Makefile.inc.

- Now that bsd.prog.mk deals with programs linked with -nostdlib
better, and has a notion of an "internal" program, use PROG
where possible. This has a good impact on the contents of
.depend files and causes programs to be linked with cc(1).

XXX: boot2 couldn't be converted as it's actually two programs.

Tested on: i386, amd64

Argh, unbreak "make depend" for AMD64.

Reported by: kris

- Removed -elf which is not a valid gcc(1) option anymore.
- Removed -ffreestanding; it's enforced by ../Makefile.inc.

Generate .depend file.

Untangle building of AMD64 boot code.

Tested on: amd64 (sledge)

First round of cleanups to sys/boot/ makefiles:

- do not use PROG for what's not a real C program,
- use sys.mk transformation rules where possible,
- only create the "machine" symlink on AMD64,
- removed MAINTAINER lines in individual makefiles,
- added the LIBSTAND defitinion to <bsd.libnames.mk>,
- somewhat better contents in .depend files.

Tested on: i386, amd64
Prodded by: bde

Inherit BINDIR from a parent Makefile.inc.

Changed the RB_PAUSE flag from 0x40000 to 0x100000 and marked the old
value as reserved for internal use in boot blocks, because RB_PAUSE
broke binary compatibility by usurping the RB_DUAL flag. Probably no
one except me has boot blocks for which this matters, since most boot
blocks based on biosboot including pc98's boot2 can't boot elf kernels,
and /boot/loader doesn't properly pass flags set by the previous stage.

reboot.h:
Also mark the historical RB_PROBEKBD flag (0x80000) as reserved for
internal use in boot blocks.

boot2.c:
Added comments to inhibit usurping of other flags.

Approved by: guido, imp
MFC after: 1 week

Include <sys/reboot.h> the definition of RB_BOOTINFO. The previous
commit broke the world because it depended on namespace pollution that
was only in my version of <machine/bootinfo.h>. The include was removed
in rev.1.63 after the last reference to it went away in rev.1.61.

Fixed loss of setting of the RB_BOOTINFO flag in rev.1.43. Fixed wrong
comment about this flag in rev.1.61. It is not historical like the
comment said; it is the flag that says that most of what is laboriously
put in the bootinfo struct is actually there. Newer kernels were
bootable by even the broken boot2 without losing anything except the
symbol table, but older kernels need at least the memory sizes.

Restoring the "|" with RB_BOOTINFO that was lost in rev.1.43 costs 5
bytes. The fix can be done in only 4 bytes by fixing some code that
was removed in rev.1.61 (put RB_BOOTINFO back in in the initial value
of "opts" and fix RBX_MASK to not clobber it.)

Use __FBSDID().
Also some minor copyright style cleanups.

Build on amd64. Yes, I know this isn't particularly nice.

Libdisk does not need to include <sys/diskslice.h> any more.

Move the remaining bits of <sys/diskslice.h> to <i386/include/bootinfo.h>

Move i386/pc98 specific bits from <sys/reboot.h> to
<i386/include/bootinfo.h> as well.

Adjust includes in sys/boot accordingly.

Fixed CLEANFILES.

Submitted by: cron

Build a file "boot" which consists of boot1 and boot2 concatenated.

There is little if any reason to treat the two components separately
and it will simplify disklabel(8) and libdisk if we didn't.

Save 4 more bytes by not initializing opts to 0. This moves it from
the data section to the bss section givig us initialization for free.

Noticed by: bde

Fix interactive booting:
o Revision 1.38 introduced the -n flag. It conflicted with the
RB_BOOTINFO flag, so was in effect always on. Change the -n flag to
be bit 0x1c instead of 0x1f. This also had the consequence that a mal-formed
/boot.config would render the system unbootable because the user was
unable to enter anything at all on the command line.
o Remove the initialization of opt to be RB_BOOTINFO since we filter that bit
out and do not otherwise use it.

Reviewed by: jhb
MFC after: 3 days

-mno-align-long-strings can make things smaller, so lets use it in hopes
that it does here.

Put back the casts to unsigned. While no strictly necessary for its
current uses, the name strcmp has strong connotations that shouldn't
lightly be discarded. This doesn't cost us anything.

Submitted by: bde

I didn't intend to delete this rm from the Makefile. It snuck in at
the last second before the commit.

# likely we can remove this hack now that gcc generates better aligned code
# in the align to word case.

Noticed by: bde

Reduce diffs with Peter's expanded diffs:
1) Put back the keyboard printing printf, at the cost of 58 bytes.
2) Minor tweak to getstr at no apparent cost.

Make both UFS1 and UFS2 fit on the same boot blocks. These are a
subset of Peter's patchs that are believed to be safe.

Makefile tweaks:
o -fomit-frame-pointer
o Change default to building both UFS1 and UFS2 bootblocks.

Lots of boot2 tweaks:
o lookup is only ever called with kname, so use it directly.
o inline memsize
o getstr are only ever called with cmd, so hardware that.
o tweaks to the parsing code to test after the conversion rather than
before since we tested after anyways.
o eliminate support for %x in printf.
o eliminate a few bytes in printfs.
o Tweak the boot banner.
o eliminate support for wd and " " devices (I might add wd back to
keep bde happy).
o eliminate support for a few arguments.

This takes us from -162 bytes free to 67 bytes free.

I've tested this only on a few systems, so be careful when updating to
this change.

Submitted by: peter, imp, ian

Remove unneeded casts. Add others to make WARNS=5 happy.

Employ the unused bytes after the disklabel in the second sector. This makes
it possible to make UFS1_ONLY and UFS2_ONLY versions which fit inside the
traditional 16 sectors.

Remove assorted now unneeded hackery.

UFS1_AND_UFS2 still needs another 150 bytes to work, and that is probably
not within our reach, ever.

Remove unnecessary call to fsread().

Always use the smaller GCC builtin memcpy

Remove unused variable.

Don't fill in the table with the BIOS idea about disk-geometry, we don't
use it. This saves a surprising number of bytes.

Revert MEM_USR back to 0xa000 for BTX clients. Instead, adjust boot2
to run at 0xc000 by changing its virtual start address from 0x1000 to
0x2000.

Tested by: phk

Now that ufsread.c doesn't do 64bit divide remainder operations,
don't bother with libkern.

Sponsored by: DARPA & NAI Labs.

Save a couple of bytes by not returning ints nobody care about.

Sponsored by: DARPA & NAI labs

Reinstate rev 1.36 with an important line that got missed. Note this
also improves the "random undocumented offsets into various memory
spaces" a little bit.

Remove unused TYPE_WD and TYPE_WFD.

Correctly calculate dmadat: We need to take the address of _end, it's
contents is irrelevant and likely to be zero;

This doesn't change the resultant value, but it does save a couple of bytes
because &_end is constant.

Unbreak boot2 by backing out rev 1.36 to Makefile, which does not
work as advertised:

bang# pwd
/bang/src/sys/boot/i386/boot2
bang# make clean >& /dev/null
bang# cvs -q update -r 1.35 Makefile >& /dev/null
bang# make >& /dev/null
bang# cat /usr/obj/`pwd`/boot2.h
#define XREADORG 0x725
bang# cvs -q update -r 1.36 Makefile > & /dev/null
bang# make clean > & /dev/null
bang# make > & /dev/null
bang# cat /usr/obj/`pwd`/boot2.h
#define XREADORG 0x25
bang#

Save four bytes by shortening a string two chars.

Sponsored by: DARPA & NAI Labs.

Correct a bug in adding 0x700 to a number.

Conditionalize the number of sectors loaded by boot1.s on UFS1/UFS12.

Conditionalize the "XX bytes left" checks reference on UFS1/UFS12.

Conditionally build the necessary 64bit math for boot2 if UFS12.

Sponsored by: DARPA & NAI Labs.

Change the comment character from # to // in boot1.s and run
it through CPP so we can conditionalized things.

Sponsored by: DARPA & NAI Labs

Correctly compensate for both offset and unoffset on-disk BSD disklabels.

Sponsored by: DARPA & NAI Labs.

Move the definition of UFS1_ONLY into the Makefiles where it belongs.

Sponsored by: DARPA & NAI Labs.

Don't call INT 12H anymore in boot program.
Many recent machine have a broken INT 12H (Get base memory size)
implementation and boot program stops if INT 12H is called.

This commit should solve the problem at very first step of FreeBSD
installation occurred on newer some machines.

Reviewed by: bde, jhb
MFC after: 1 week

Split MBR and PC98 on-disk sliceformats out from disklabel.h, step 1:

Peter had repocopied sys/disklabel.h to sys/diskpc98.h and sys/diskmbr.h.

These two new copies are still intact copies of disklabel.h and
therefore protected by #ifndef _SYS_DISKLABEL_H_ so #including them
in programs which already include <sys.disklabel.h> is currently a
no-op.

This commit adds a number of such #includes.

Once I have verified that I have fixed all the places which need fixing,
I will commit the updated versions of the three #include files.

Sponsored by: DARPA & NAI Labs.

Restore Rev. 1.40 (remove "Keyboard yes/no" printf).
GCC 3.2 overflows boot2 by 12 bytes, this patch brings it back
within the boundaries, with 12 bytes available for future bloat.

Approved by: obrien

Drop support for COPY, -c has been the default mode of install(1)
for a long time now.

Approved by: bde

Revert the part of Kirks UFS2 commit which added divdi3.c and moddi3.c
to libi386, this issue was resolved already in a cleaner way.

This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.

Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.

Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).

Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>

Add explicit dependency on ufsread.c

Preparation for UFS2 commit:

Factor the ufs reading code out of the i386/boot2 loader so it can
be reused by for instance sparc64.

Sponsored by: DARPA and NAI Labs.

Align CLEANFILES with revision 1.25 changes.

Saved 176 bytes by compiling with -fno-guess-branch-probability. The
default of -fguess-branch-probablility causes time optimizations (?)
like rewriting `if (foo) x++;' as
`if (!foo) goto forth; back: ; ...; forth: x++; goto back;". This is
pessimizes space especially well on i386's because one short branch
gets converted to 2 long ones.

Removed -fno-align-foo since it is implied by -Os. Previous commit
messages seem to have overstated the new alignment bugs in gcc. The
only case that affects boot2 is that -fno-align-functions (or
equivalently -falign-functions=1) actually gives -falign-functions=2.
This is caused by FUNCTION_BOUNDARY being 2 (bytes) instead of 1.
The default case where the optimization level is 1 and no alignment
options are given is more broken. All alignments are minimal, modulo
the bug in FUNCTION_BOUNDARY. This is caused by toplev.c setting
defaults too early.

Some hacks in previous commits ar not needed now, but may as well be
kept until gcc is fixed. The previous on in the Makefile saved 96
bytes of text due to the wrong FUNCTION_BOUNDARY and 32 bytes of data
due to unrelated bloat in the alignment of large objects. There aren't
even any options to control alignment of data.

Save about 60 bytes by #define memcpy __builtin_memcpy and removing
the function we provided. Restore the Keyboard: yes/no printf for the
probe diagnostics. We end up with 40 bytes free.

Use a crowbar and duct-tape to make boot2 fit again. This gets it down
to 4 bytes free. I removed a printf (the Keyboard yes/no) since it is of
marginal value and sed'ed the generated asm output to remove the unwanted
aligns. There's probably a better way to gain a few extra bytes than
losing the printf. Shortening strings is probably a better option but this
should get us over the hurdle.

- Axe -mpreferred-stack-boundary=2 as -Os turns this on by default.
- Axe -fdata-sections as turning it on or off makes no difference. If
it did make a difference it would serve to bloat boot2 even further with
extra padding.
- Axe -fforce-addr. This gets us 32 bytes so we are down to only being
64-bytes over.

We still can't compile this with gcc 3.1. The problem seems to be that
the -fno-align-foo options don't actually work. Comparing the new and
old output it turns out that gcc is 4-byte padding all the functions and
labels and what not despite the passed in arguments thus adding the
unfortunate bloat to boot2.

-ffreestanding is the word for /sys.

Code cleanup, no functional change.
Patch adapted from PR.

PR: i386/36015
Submitted by: thomas@cuivre.fr.eu.org
MFC after: 1 week

Add option -n to i386 boot2 to disallow boot interruption by keypress.

PR: i386/36016
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
Reviewed by: rnordier
MFC after: 1 week

Implement -m and -p loader(8) "boot" command options in boot2.
(This is more useful for 4.x where boot blocks can still load
kernels, modulo the PR kern/17422.)

Oops, the previous revision (1.35) broke booting from floppies
because the buffers we use could end up spanning a 64k boundary.
Unfortunately it causes too much bloat (228 -> 72 bytes free) to
just reinstate the old malloc() function.

Instead, define a structure that contains all 4 buffers which must
not cross 64k boundaries. We allocate a 64k-aligned instance in
main() using the magic that was in the old boot2 malloc() function.
This brings the free space down to 168 bytes, but that is still
better than it was before revision 1.35 (136 bytes).

Reported by: Mike Brancato <funnyguy@digitalsmackdown.net>
Pointy-hat to: iedowse

Make the i386 boot2 fully blocksize-agnostic, as has already been
done with boot1 on the alpha. We use 4k buffers regardless of the
actual filesystem block size.

Remove the simple malloc() implementation, as it is no longer used.

Increase BSIZEMAX from 8k to 16k, so that we can reliably boot from
filesystems with 16k blocks.

Allow the RBX_DUAL flag to appear in bootinfo.

Add in a hack to support IBM "El Torito" CD-ROM booting BIOS's which expect
the first sector of the emulated floppy to contain a valid MS-DOS BPB that
it can modify. Since boot1 is the first sector of boot.flp, this resulted
in the BIOS overwriting part of boot1: specifically the function used to
read in sectors from the disk.

Submitted by: Mark Peek <mark@whistle.com>
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com>
PR: i386/26382
Obtained from: NetBSD, OpenBSD (the example BPB)
MFC after: 1 month

Unset MAINTAINER.

* include/elf.h has been repo copied to include/elf-hints.h, and it no
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.

This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.

Set MAINTAINER.

- Inline all the functions that are only called once. This results in a
savings of 68 bytes in boot2.
- Also add a comment warning that you can't remove the empty exit()
function.

Add in support for EDD to support large disks via LBA. This uses a
method similar to that of the loader to avoid potentially breaking older
drives in that we only use EDD if the desired cylinder is > 1023.

Treat \t and \n inside /boot.config as whitespaces.

PR: 19215

Clean up all of the 16-bit assembly code in the x86 bootstrap to work
with the new binutils. Now that we have a decent assembler, all the old
m4 macros are no longer needed. Instead, straight assembly can be used
since as(1) now understands 16-bit addressing, branches, etc. Also,
several bugs have been fixed in as(1), allowing boot0.s to be further
cleaned up.

Add a missing dependency: boot2 depends on the BTX kernel.

Support the new ata(4) syntax, while providing backward compatibility for wd(4).

Reviewed by: jkh, msmith, sos
Approved by: jkh

Add -fdata-sections, which is a new GCC 2.95 optimization. Remove
-fschedule-insns as it wasn't such a big win with 2.95 after all.

Add the *BIG* win "-mpreferred-stack-boundary=2" optimiztion submitted by
Dima. GCC 2.95 ensures the stack frame is always properly [opitimally]
aligned by surrounding every function call by code simular to
"addl $-12, %esp" / "addl $12, %esp". Here we need the reduction in space,
with speed not an issue.

Return this file to its pre-spammed version. Thanks to some new compiler
optimizations, we can go from 3 bytes free with the spammed version, to
279 bytes free with the full version.

Enter complier upgrade mode again. We need to cut 169 bytes from this:
Remove some printf() calls, reduce size of buffers, and abbreviate
some strings.

Hopefully the boot people will fix this spamage after the cut over to
Gcc 2.95.2 as the system compiler.

Turn on the -fforce-addr and -fschedule-insns optimizations. Adding
either one gives us an additional 32 bytes of additional space available
when using EGCS 1.1.2. With GCC 2.95.2 -fforce-addr gives us 12 more bytes,
and adding -fschedule-insns gives us an additional 4 bytes.

$Id$ -> $FreeBSD$

Reintroduce LBA (cyl > 1023) support in the bootblocks, enabled by
means of a build option.

Fix use of e_phoff in place of e_phnum.

Fix damage introduced in previous commit.

Optimize better for space.
Thanks to: jdp

Remove the string ">>> FreeBSD/i386 BOOT". I need to reduce the size of
boot2 by 16 bytes. I expect this to be temperary until the boot2 authors
can do the proper fix.

Make <DEL> an alternative rubout character for command input; many
serial terminals use this as their default rubout key.

Check size of partition before using it.

Fill in the bi_bios_dev field in the bootinfo struct; the loader doesn't
guess this value well in anything other than the simplest of situations.

Drop boot.help support.

Use etc/make.conf settings for serial port and speed.

Submitted by: rvb
Reviewed by: bde

Damn, I thought I had committed this already, but it seems not.

Move the relocated boot1 and arg transfer space from 0x600/0x800 to
0x700/0x900. In theory this should make no difference, apart from the fact
that Buslogic controllers happen to use a few bytes at 0x600 for some sort
of scratch space for it's int 0x13 hook (!!!), causing the machine to crash
badly when the boot2 code makes it's callbacks into boot1 for disk IO.

Submitted by: Robert Nordier <rnordier@freebsd.org>

Prevent boot.config being parsed more than once.

Drop the familiar 'text=xxxx data=xxxx bss=xxxx ...' display while
loading. This eliminates noise when loading boot/loader; and when
loading a kernel, they generally flash by too fast to be
intelligible anyway.

boot1: Eliminate EDD detection and optional use of disk packet
interface. Do some general consistency fixes and space optimizations.
Use of some freed-up space to defend against possible BIOS misfeatures.

boot2: Revise disk read interface to provide for boot1 changes. Free
up space for this.

Make use of BIOS int 0x13 extensions configurable, and disabled
by default.

biosboot compatibility fix: change behavior of backspace in getstr().
Noticed by: abial

Optimize away a few bytes to make space for the above.

Make serial port, data format, and bps configurable.

Fix some glitches in the input routine:
Don't display a \b if not acting on it.
Don't process binary zero chars (which result from pressing function
keys, etc. on the PC).

Having probed the keyboard, turn off the -P flag.

Treat all options as toggles (ie. -c -c is the same no -c). Since
the boot.config settings are persistent, this seems to provide a
useful override capability, and should break only on broken
boot.config's.

Output a cosmetic newline if booting with no input.

biosboot compatibility fix:
If we have a boot.config command, display it.

biosboot compatibility fix:
Read boot.help before parsing boot.config. We were parsing
boot.config first, which could result in boot.help being read
from a different location (or not found), which would probably
just cause surprise, without being useful.

Fix path to sio.s

Add serial, dual, and probe-keyboard support.

Fix btx include path.

Include <bsd.prog.mk>. Add install target (to /boot for now).

Fix flow of control after directory listing; enable EDD support;
cosmetics.

Make v86.ctl default more explicit; simplify read error-handling;
twiddle.

Adjust NDEV value.
Optimize reading of system time.

Change to a 15-sector boot2.
Refine slice-handling.

Don't use an absolute path to objcopy.
Noticed by: Scott Mace <smace@intt.org>

Improve drive recognition and handling.

New boot blocks: support for /boot/loader; a.out & ELF; cyl > 1023;
multiple 0xa5 slices; etc.