Remove svn:mergeinfo from the releng/10.0 branch.

After branch creation from stable/10, the stable/10 branch mergeinfo
was moved to the root of the branch.

Since there have not been any merges from stable/10 to releng/10.0
yet, we do not need to track any of the existing mergeinfo here.

Merges to releng/10.0 should now be done to the root of the branch.

For future branches during the release cycle, unless otherwise noted,
this change will be done as part of the stable/ and releng/ branch
creation.

Discussed with: peter
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r256645.

Add a new capability, VM_CAP_ENABLE_INVPCID, that can be enabled to expose
'invpcid' instruction to the guest. Currently bhyve will try to enable this
capability unconditionally if it is available.

Consolidate code in bhyve to set the capabilities so it is no longer
duplicated in BSP and AP bringup.

Add a sysctl 'vm.pmap.invpcid_works' to display whether the 'invpcid'
instruction is available.

Approved by: re (hrs)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Parse the memory size parameter using expand_number() to allow specifying
the memory size more intuitively (e.g. 512M, 4G etc).

Submitted by: rodrigc
Reviewed by: grehan
Approved by: re (blanket)

Merge projects/bhyve_npt_pmap into head.

Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal with nested page faults in the context of that vmspace. This also
enables features like accessed/dirty bit tracking, swapping to disk and
transparent superpage promotions of guest memory.

Guest vmspace:
Each bhyve guest has a unique vmspace to represent the physical memory
allocated to the guest. Each memory segment allocated by the guest is
mapped into the guest's address space via the 'vmspace->vm_map' and is
backed by an object of type OBJT_DEFAULT.

pmap types:
The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.

The PT_X86 pmap type is used by the vmspace associated with the host kernel
as well as user processes executing on the host. The PT_EPT pmap is used by
the vmspace associated with a bhyve guest.

Page Table Entries:
The EPT page table entries as mostly similar in functionality to regular
page table entries although there are some differences in terms of what
bits are used to express that functionality. For e.g. the dirty bit is
represented by bit 9 in the nested PTE as opposed to bit 6 in the regular
x86 PTE. Therefore the bitmask representing the dirty bit is now computed
at runtime based on the type of the pmap. Thus PG_M that was previously a
macro now becomes a local variable that is initialized at runtime using
'pmap_modified_bit(pmap)'.

An additional wrinkle associated with EPT mappings is that older Intel
processors don't have hardware support for tracking accessed/dirty bits in
the PTE. This means that the amd64/pmap code needs to emulate these bits to
provide proper accounting to the VM subsystem. This is achieved by using
the following mapping for EPT entries that need emulation of A/D bits:
Bit Position Interpreted By
PG_V 52 software (accessed bit emulation handler)
PG_RW 53 software (dirty bit emulation handler)
PG_A 0 hardware (aka EPT_PG_RD)
PG_M 1 hardware (aka EPT_PG_WR)

The idea to use the mapping listed above for A/D bit emulation came from
Alan Cox (alc@).

The final difference with respect to x86 PTEs is that some EPT implementations
do not support superpage mappings. This is recorded in the 'pm_flags' field
of the pmap.

TLB invalidation:
The amd64/pmap code has a number of ways to do invalidation of mappings
that may be cached in the TLB: single page, multiple pages in a range or the
entire TLB. All of these funnel into a single EPT invalidation routine called
'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and
sends an IPI to the host cpus that are executing the guest's vcpus. On a
subsequent entry into the guest it will detect that the EPT has changed and
invalidate the mappings from the TLB.

Guest memory access:
Since the guest memory is no longer wired we need to hold the host physical
page that backs the guest physical page before we can access it. The helper
functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.

PCI passthru:
Guest's with PCI passthru devices will wire the entire guest physical address
space. The MMIO BAR associated with the passthru device is backed by a
vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that
have one or more PCI passthru devices attached to them.

Limitations:
There isn't a way to map a guest physical page without execute permissions.
This is because the amd64/pmap code interprets the guest physical mappings as
user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U
shares the same bit position as EPT_PG_EXECUTE all guest mappings become
automatically executable.

Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews
as well as their support and encouragement.

Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing
object for pci passthru mmio regions.

Special thanks to Peter Holm for testing the patch on short notice.

Approved by: re
Discussed with: grehan
Reviewed by: alc, kib
Tested by: pho

Remove deprecated APIs to get the total and free memory available to vmm.ko.

These APIs were relevant when memory for virtual machine allocation was
hard partitioned away from the rest of the system but that is no longer
the case. The sysctls that provided this information were garbage collected
a while back.

Obtained from: NetApp

Simplify the assignment of memory to virtual machines by requiring a single
command line option "-m <memsize in MB>" to specify the memory size.

Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).

The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.

The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.

Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp

Implement guest vcpu pinning using 'pthread_setaffinity_np(3)'.

Prior to this change pinning was implemented via an ioctl (VM_SET_PINNING)
that called 'sched_bind()' on behalf of the user thread.

The ULE implementation of 'sched_bind()' bumps up 'td_pinned' which in turn
runs afoul of the assertion '(td_pinned == 0)' in userret().

Using the cpuset affinity to implement pinning of the vcpu threads works with
both 4BSD and ULE schedulers and has the happy side-effect of getting rid
of a bunch of code in vmm.ko.

Discussed with: grehan

Add svn properties to the recently merged bhyve source files.

The pre-commit hook will not allow any commits without the svn:keywords
property in head.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

Remove mptable generation code from libvmmapi and move it to bhyve.
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.

Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.

Reviewed by: neel
Obtained from: NetApp

Add an api to map a vm capability type into a string to be used for display
purposes.

The ioctl VM_GET_MEMORY_SEG is no longer able to return the host physical
address associated with the guest memory segment. This is because there is
no longer a 1:1 mapping between GPA and HPA.

As a result 'vmmctl' can only display the guest physical address and the
length of the lowmem and highmem segments.

Change vm_malloc() to map pages in the guest physical address space in 4KB
chunks. This breaks the assumption that the entire memory segment is
contiguously allocated in the host physical address space.

This also paves the way to satisfy the 4KB page allocations by requesting
free pages from the VM subsystem as opposed to hard-partitioning host memory
at boot time.

Add ioctls to control the X2APIC capability exposed by the virtual machine to
the guest.

At the moment this simply sets the state in the 'vcpu' instance but there is
no code that acts upon these settings.

Add sysctls to display the total and free amount of hard-wired mem for VMs
# sysctl hw.vmm
hw.vmm.mem_free: 2145386496
hw.vmm.mem_total: 2145386496

Submitted by: Takeshi HASEGAWA hasegaw at gmail com

Allow the 'bhyve' process to control whether or not the virtual machine sees an
ioapic.

Obtained from: NetApp

API to map an apic id to the vcpu.

At the moment this is a simple mapping because the numerical values are
identical.

There is no need to explicitly specify the CR4_VMXE bit when writing to guest
CR4. This bit is specific to the Intel VTX and removing it makes the library
more portable to AMD/SVM.

In the Intel VTX implementation, the hypervisor will ensure that this bit is
always set. See vmx_fix_cr4() for details.

Suggested by: grehan

MSI-x interrupt support for PCI pass-thru devices.

Includes instruction emulation for memory r/w access. This
opens the door for io-apic, local apic, hpet timer, and
legacy device emulation.

Submitted by: ryan dot berryhill at sandvine dot com
Reviewed by: grehan
Obtained from: Sandvine

First cut to port bhyve, vmmctl, and libvmmapi to HEAD.

Import of bhyve hypervisor and utilities, part 1.
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface

bhyve was designed and implemented by Neel Natu.

Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski