- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove COMPILATIONDATE from the default section. This string is no longer
being substituted since r162063.

PR: bin/143976
MFC after: 1 month

With uart(4) default, change /dev/cuad# to /dev/cuau# so that
out-of-the-box FreeBSD is consistent.

Catch up with PHK's sio(4) cuaa->cuad rework [sys/dev/sio/sio.c rev. 1.456].

Catch up with PHK's sio(4) cuaa->cuad rework [sys/dev/sio/sio.c rev. 1.456].

Put a complete set of pppd(8) sample configuration files in
/usr/share/examples/pppd.

Remove the out-of-place pppd(8) configuration files in etc/ppp,
ppp.shells.sample and ppp.deny.

Make the appropriate changes to the build process, etc/Makefile and
etc/mtree/BSD.usr.mtree, so it all works.

Move the interface address setting and default route setting out of
the default section and into the papchap section.

It's really irritating when you run ppp with no arguments and end up
blowing away your default route !

Change the 120 second timeout to 180 seconds to reflect the real default

120 seconds is not 3 minutes

Correct typo

Add a default ident string and do some minor whitespace adjustments

Add various system usernames (even though I try to avoid pppd!!!)

PR: 19717
Submitted by: Tony Finch <dot@dotat.at>

Add some comments and wrap the dial line nicely

Add /bin/tcsh for completeness

Submitted by: knu

$Id$ -> $FreeBSD$

Add a default ppp.conf (mode 600).

Originally submitted by: Wayne Self <wself@cdrom.com>

Allow a ppp startup option in rc.conf.

Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.

Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>

Add /usr/share/examples/ppp directory
Don't install /etc/ppp/ppp.*.example
Remove ppp/ppp.{conf,linkup,linkdown,secret}.sample

Suggest using ``iface clear'' under certain circumstances
in ppp.linkdown.

Show how to create a secure (ssh) VPN

Add a compuserve example.
Detailed by: Masahiro Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>

Add Id keywords

Show some examples on how to configure callback & CBCP.
Show examples of the (new) fifth field in ppp.secret.

Remove redundant comments.

MFMP: Make ppp multilink capable.

Correct spelling.

Suggest using /var/tmp for local domain `diagnostic' sockets,
rather than making a new directory. Also, suggest 0600
permissions (mask: 0177).

Dangers noted by: Theo de Raadt <deraadt@cvs.openbsd.org>

Don't suggest creating sockets in /var/run as we create
sockets as our original uid. Suggest creating /var/ppp
with perms 1777 instead.

Pointed out by: Masafumi NAKANE <max@wide.ad.jp>

Allow (and document) execution of commands from within
our chat script.
You can now even run chat(8) - see ppp.conf.sample.

Add the ``loop'' example to the right file (oops).

Add a loopback example.

Some "allow" examples.

Mention IP address label in ppp.linkup.
Add an "examples:" label so that people don't
inadvertently get all the examples with the
"ondemand" label.

Suggest that a ``!include ~/.ppp.conf'' may be in order.

Merge ppp configuration examples.
Add some useful bits & pieces.

Mention how to keep the line for a minimum call charge.
Suggested by: Stuart Henderson <stuart@internationalschool.co.uk>

Add "delete 0" before "add 0 0..."
Suggested by:

Correct and explain the PAP/CHAP examples.

Don't add loopback routes in the examples. Ppp
now does this internally by default.

Update samples for the changed LQR default.

Fix the bogus routes I introduced in the last commit.

Add examples of "!bg", "add 0 0 HISADDR" in ppp.conf
and how to do ppp over tcp/ip.

Use "set log", not "set debug".
Grammar police.

Bring pmdemand example in line with handbook and man
page examples.

Don't use HISADDR in ppp.conf examples as it's not
set up properly 'till ppp.linkup is parsed.

PR: 3114
Submitted by: Kenneth R. Westerback <krw@tcn.net>

Update direct-* example to reflect LQR on both sides.
Fix bogus loopback route.

This example shows LQR working on both sides of the loop.

Suggested by: David Nugent
Change the name of ppp.disabled to ppp.deny for consistency with
at.deny and friends.

List of users who may not use pppd in system password logins, and a
sample list of acceptable shells.

fix a misspelling of demand...

Submitted-by: Takashi Saeki

Closes PR#2989

Add examples for a direct serial connection using lqr
Candidate for 2.2.

Make the sample config files more understandable, correcting various
bits of grammar.
Added a decent pmdemand example for dynamic IPs on both sides.
Could this be a 2.2 candidate ?

Revert $FreeBSD$ to $Id$

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Added ocol: ppp to the first two examples so that ppp catually requests
the ppp protocol when it logs in. I'm not sure whether this applies to all
the examples. Are there cases where the ISP assumes ppp is being used ?

Clean up the example files by giving them a unified set of names (which
I don't like, finding them rather redundantly named, but I'm just going
with the flow here).

Fix several places where interface netmask was in place of route netmask
Fix dialout device name
Add multi-phone example

Another round of spelling fixes.

Fixing misspelling and chang default device as dailout

Reviewed by: Atsushi Murai <amruai@spec.co.jp>

New user Process PPP based on iij-ppp0.94beta2.

o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....

-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)

This commit was generated by cvs2svn to compensate for changes in r6056,
which included commits to RCS files with non-trunk default branches.