-- -- CDDL HEADER START -- -- The contents of this file are subject to the terms of the -- Common Development and Distribution License, Version 1.0 only -- (the "License"). You may not use this file except in compliance -- with the License. -- -- You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE -- or http://www.opensolaris.org/os/licensing. -- See the License for the specific language governing permissions -- and limitations under the License. -- -- When distributing Covered Code, include this CDDL HEADER in each -- file and include the License file at usr/src/OPENSOLARIS.LICENSE. -- If applicable, add the following below this CDDL HEADER, with the -- fields enclosed by brackets "[]" replaced with your own identifying -- information: Portions Copyright [yyyy] [name of copyright owner] -- -- CDDL HEADER END -- -- Copyright 1996 Sun Microsystems, Inc. All rights reserved. -- Use is subject to license terms. -- -- #ident "%Z%%M% %I% %E% SMI" -- -- -------------------------------------------------------------------------- -- ra.mib mib file for relay agent -- -- Dependence: $(MIB_HOME)/mib_core.txt has read -- by the MIB compiler/generator -- Assumption: The oid for RelayAgent-mib is sun.500(not sure) -- --------------------------------------------------------------------------- -- History: -- Date Developer Comment -- 5-13-96 Jerry Yeung create -- 6-11-96 Jerry Yeung agentTableIndex becomes read-write -- regTree has double index -- trap port -- no agentOperStatus -- agent system up time -- check point -- statical data -- subtree view -- table for subtree -- 6-23-96 Jerry Yeung change some index to read ony -- 7-3-96 Jerry Yeung add relayPollInterval and -- relayMaxAgentTimeOut -- add agentWatchDogTime in entry -- 7-09-96 Jerry Yeung change oid for relay agent -- --------------------------------------------------------------------------- RELAY-AGENT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE, DisplayString FROM RFC1212; sun OBJECT IDENTIFIER ::= { enterprises 42 } relay-agent OBJECT IDENTIFIER ::= { sun products(2) 15 } -- -- *********** agentTable ************** -- agentTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The sub-agent table." ::= { relay-agent 1 } agentTableIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The next available index in agentTable." ::= { relay-agent 2 } -- **************************************** -- -- ********** RegTreeTable **************** -- regTreeTable OBJECT-TYPE SYNTAX SEQUENCE OF RegTreeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for subtree registered by sub-agents." ::= { relay-agent 3 } regTreeTableIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The next available index in regTreeTable." ::= { relay-agent 4 } -- **************************************** -- -- ********** Global Relay agent Info ****** -- relayProcessIDFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The file storing all the process id." ::= { relay-agent 5 } relayResourceFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The file storing all the agents info." ::= { relay-agent 6 } relayPersonalFileDir OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The directory of the personal file." ::= { relay-agent 7 } relayLogFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The log file of the relay agent." ::= { relay-agent 8 } relayOperationStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "operation mode of the relay agent" ::= { relay-agent 9 } relayTrapPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "operation mode of the relay agent" ::= { relay-agent 10 } relayCheckPoint OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "check the agent name is duplicate or not." ::= { relay-agent 11 } relayNSession OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "num of total sessions received." ::= { relay-agent 12 } relayNSessionDiscards OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "num of total sessions received." ::= { relay-agent 13 } -- **************************************** -- -- ********** TableForRegTable **************** -- regTblTable OBJECT-TYPE SYNTAX SEQUENCE OF RegTblEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for table registered by sub-agents." ::= { relay-agent 14 } regTblTableIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The next available index in regTblTable." ::= { relay-agent 15 } -- **************************************** -- -- ************** Global Info for relay agent ********** -- relayPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "time interval for executing the watch-dog monitor" ::= { relay-agent 16 } relayMaxAgentTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "the max-allowable response time for any agent" ::= { relay-agent 17 } -- -- ************** agentEntry(Table Entry) ************ -- agentEntry OBJECT-TYPE SYNTAX AgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sub-agent table." INDEX { agentID } ::= { agentTable 1} AgentEntry ::= SEQUENCE { agentID INTEGER, agentStatus INTEGER, agentTimeout INTEGER, agentPortNumber INTEGER, agentPersonalFile DisplayString, agentConfigFile DisplayString, agentExecutable DisplayString, agentVersionNum DisplayString, agentProtocol DisplayString, agentProcessID INTEGER, agentName DisplayString, agentSystemUpTime TimeTicks, agentWatchDogTime INTEGER } agentID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An id for each connected agent" ::= { agentEntry 1 } agentStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), init(3), load(4), destroy(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the sub-agent." ::= { agentEntry 2 } agentTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. time for sub-agent to process the request in usec. " ::= { agentEntry 3 } agentPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The port number of the sub-agent." ::= { agentEntry 4 } agentPersonalFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The personal file of the sub-agent." ::= { agentEntry 5 } agentConfigFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The configuratioin file of the sub-agent." ::= { agentEntry 6 } agentExecutable OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The executable file of the sub-agent." ::= { agentEntry 7 } agentVersionNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The version number of the sub-agent." ::= { agentEntry 8 } agentProtocol OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The protocol of the sub-agent." ::= { agentEntry 9 } agentProcessID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The process id of the sub-agent." ::= { agentEntry 10 } agentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the sub-agent." ::= { agentEntry 11 } agentSystemUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "The system up time of the subagent." ::= { agentEntry 12 } agentWatchDogTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The period for relay agent to probe the agent" ::= { agentEntry 13 } -- **************************************************************** -- -- ************** RegTreeEntry(Table Entry) ************ -- regTreeEntry OBJECT-TYPE SYNTAX RegTreeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for tree registration." INDEX { regTreeAgentID, regTreeIndex } ::= { regTreeTable 1 } RegTreeEntry ::= SEQUENCE { regTreeIndex INTEGER, regTreeAgentID INTEGER, regTreeOID OBJECT IDENTIFIER, regTreeView DisplayString, regTreeStatus INTEGER, regTreePriority INTEGER } regTreeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the registration, currently same as agentid." ::= { regTreeEntry 1 } regTreeAgentID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "process ID of the sub-agent." ::= { regTreeEntry 2 } regTreeOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The oid of the subtree." ::= { regTreeEntry 3 } regTreeView OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The scope name of the mib subtree." ::= { regTreeEntry 4 } regTreeStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "the entry is deleted or not." ::= { regTreeEntry 5 } regTreePriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " 0 is the highest priority." ::= { regTreeEntry 6 } -- **************************************************************** -- -- ************** RegTreeEntry(Table Entry) ************ -- regTblEntry OBJECT-TYPE SYNTAX RegTblEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for table registration." INDEX { regTblAgentID, regTblIndex } ::= { regTblTable 1 } RegTblEntry ::= SEQUENCE { regTblIndex INTEGER, regTblAgentID INTEGER, regTblOID OBJECT IDENTIFIER, regTblStartColumn INTEGER, regTblEndColumn INTEGER, regTblStartRow INTEGER, regTblEndRow INTEGER, regTblView DisplayString, regTblStatus INTEGER } regTblIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the table registration." ::= { regTblEntry 1 } regTblAgentID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "agent ID of the sub-agent." ::= { regTblEntry 2 } regTblOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The oid of the subtree table." ::= { regTblEntry 3 } regTblStartColumn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "starting column of the subtable." ::= { regTblEntry 4 } regTblEndColumn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ending column of the subtable." ::= { regTblEntry 5 } regTblStartRow OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "starting row of the subtable" ::= { regTblEntry 6 } regTblEndRow OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ending row of the subtable" ::= { regTblEntry 7 } regTblView OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The scope name of the subtree table." ::= { regTblEntry 8 } regTblStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "the entry is deleted or not." ::= { regTblEntry 9 } -- **************************************************************** END