=======================================
 WNDR4500v2 Firmware Build Instructions

 Version: 1.3
 Date   : 2015/07/14
======================================== 

Note: 
      This package has been built successfully on 32-bit i386 Fedora 6 Linux 
      host machine. Compiling this package on platforms other than Fedora Core 6
      may have unexpected results.

===================
 Install toolchain
===================

1. You will need to use the  4.2.3 Linux 2.6 MIPS Cross Compiler and Tools (mipsel-uclibc toolchain),
   which have also been posted to your account.

2. To install the toolcain
   (1) The toolchain MUST be installed under /projects/hnd/tools/linux/ directory. After mkdir the dir,
            tar xvfz hndtools-mipsel-linux-uclibc-4.2.3.tgz
   (2) Add the path
            export PATH=/projects/hnd/tools/linux/hndtools-mipsel-linux-uclibc-4.2.3/bin:$PATH
       and the do the following to verify the toolchain
            mipsel-uclibc-linux26-gcc --ver

===================
 Build code
===================

1. Put the file "WNDR4500v2-V1.0.0.60_1.0.38_src.tar.zip" into a directory of your choice.
   Unzip and untar it with the following command:
        unzip WNDR4500v2-V1.0.0.60_1.0.38_src.tar.zip
        tar xvf WNDR4500v2-V1.0.0.60_1.0.38_src.tar

2. Copy the "trx" program under "WNDR4500v2-V1.0.0.60_1.0.38_src/tools" to a location where the user can access, e.g. /usr/bin :
        cp WNDR4500v2-V1.0.0.60_1.0.38_src/tools/trx /usr/bin
   If there is no "lzma" program in host machine, copy it to that location as well.
        cp WNDR4500v2-V1.0.0.60_1.0.38_src/tools/lzma /usr/bin

3. Run the following commands to build image
        cd WNDR4500v2-V1.0.0.60_1.0.38_src/src/router
        make clean
        make PROFILE=WNDR4500v2 FW_TYPE=WW && make install PROFILE=WNDR4500v2 FW_TYPE=WW

4. The final image is "WNDR4500v2-V1.0.0.60_1.0.38_src/src/router/mipsel-uclibc/kernel_image.chk".
   User may upgrade to this image using the WNDR4500v2 GUI "Router Upgrade" page.