# bcm95352rg sdram board
# Copyright (C) 2010, Broadcom Corporation. All Rights Reserved.
# 
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
# 
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
# $Id: bcm95352gr.txt,v 1.9 2010/12/23 05:37:37 Exp $

boardtype=0x0467
boardnum=${serno}
# Board revision 3.0
boardrev=0x30
# NO_EXTLNA, NOPCI, ENETVLAN, CCKHIPWR, ENETROBO, ADC.
boardflags=0x758
sromrev=2

# MIPS clock frequency in MHz
clkfreq=200

# 16 MB SDR SDRAM (4 Meg x 16 x 2)
sdram_init=0
sdram_config=0x22
sdram_refresh=0
sdram_ncdl=0

# Integrated Ethernet switch
et0macaddr=00:90:4c:91:${maclo}
et0phyaddr=30
et0mdcport=0

# single band d11 interface
wl0id=0x4318

# 802.11g parameters
il0macaddr=00:90:4c:92:${maclo}
aa0=3
ag0=2
pa0maxpwr=72
pa0itssit=62
pa0b0=0x169f
pa0b1=0xfa5e
pa0b2=0xfe8a
opo=12

# Commons wireless parameters
wl0gpio2=0
wl0gpio3=0
cctl=0
ccode=0

# Ethernet switch config (vlan0:LAN, vlan1:WAN)
vlan0ports=1 2 3 4 5*
vlan0hwname=et0
vlan1ports=0 5u

# Bootloader and OS glue
landevs=vlan0 wl0
wandevs=et0
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
boot_wait=on
reset_gpio=7

# Watchdog timer in ms
watchdog=3000

# SES parameters
gpio13=ses_led
gpio14=ses_button