.TH UDHCPD.CONF 5 2001-09-26 GNU/Linux "GNU/Linux Administrator's Manual" .SH NAME udhcpd.conf \- udhcp server configuration file .SH DESCRIPTION The file .I /etc/udhcpd.conf contains configuration information specific to the udhcp server. It should contain one configuration keyword per line, followed by appropriate configuration information. .SH OPTIONS .TP .BI start\ ADDRESS The starting address of the IP lease block is .IR ADDRESS . The default is .BR 192.168.0.20 . .TP .BI end\ ADDRESS The ending address of the IP lease block is .IR ADDRESS . The default is .BR 192.168.0.254 . .TP .BI interface\ INTERFACE The udhcp server should listen on .IR INTERFACE . The default is .BR eth0 . .TP .BI max_leases\ LEASES Offer at most .I LEASES leases (including those reserved by OFFERs, DECLINEs, and ARP conflicts). The default is .BR 254 . .TP .BI remaining\ REMAINING If .I REMAINING is .BR yes , store the time remaining for each lease. If it is .BR no , store the expiration time for each lease. The default is .BR yes . .TP .BI auto_time\ SECONDS Write the lease information to a file every .I SECONDS seconds. The default is .BR 7200 . .TP .BI decline_time\ SECONDS Reserve an IP for .I SECONDS seconds if a DHCP decline message is received. The default is .BR 3600 . .TP .BI conflict_time\ SECONDS Reserve an IP for .I SECONDS seconds if an ARP conflict occurs. The default is .BR 3600 . .TP .BI offer_time\ SECONDS Reserve an IP for .I SECONDS seconds if it is offered. The default is .BR 60 . .TP .BI min_lease\ SECONDS Reserve an IP for the full lease time if the lease to be given is less than .I SECONDS seconds. The default is .BR 60 . .TP .BI lease_file\ FILE Write the lease information to .IR FILE . The default is .BR /var/lib/misc/udhcpd.leases . .TP .BI pidfile\ FILE Write the process ID to .IR FILE . The default is .BR /var/run/udhcpd.pid . .TP .BI notify_file\ FILE Execute .I FILE after the lease information is written. By default, no file is executed. .TP .BI siaddr\ ADDRESS BOOTP specific option. The default is .BR 0.0.0.0 . .TP .BI sname\ NAME BOOTP specific option. There is no default. .TP .BI boot_file\ FILE BOOTP specific option. There is no default. .TP .BI option\ OPTION DHCP specific option. .RS .TP .BI subnet\ ADDRESS .TP .BI timezone\ OFFSET .TP .BI router\ ADDRESS... .TP .BI timesvr\ ADDRESS... .TP .BI namesvr\ ADDRESS... .TP .BI dns\ ADDRESS... .TP .BI logsvr\ ADDRESS... .TP .BI cookiesvr\ ADDRESS... .TP .BI lprsvr\ ADDRESS... .TP .BI hostname\ HOSTNAME .TP .BI bootsize\ SIZE .TP .BI domain\ DOMAIN .TP .BI swapsvr\ ADDRESS .TP .BI rootpath\ PATH .TP .BI ipttl\ TTL .TP .BI mtu\ MTU .TP .BI broadcast\ ADDRESS .TP .BI ntpsrv\ ADDRESS... .TP .BI wins\ ADDRESS... .TP .BI requestip\ ADDRESS .TP .BI lease\ SECONDS .TP .BI dhcptype\ TYPE .TP .BI serverid\ ADDRESS .TP .BI tftp\ FILE .TP .BI bootfile\ FILE The default for .B lease is .BR 864000 . There are no defaults for the other options. .RE .SH SEE ALSO .BR udhcpd (8).