# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@am__append_1 = dbus.devhelp
@DBUS_HAVE_MAN2HTML_TRUE@am__append_2 = $(MAN_HTML_FILES)
subdir = doc
DIST_COMMON = $(dist_doc_DATA) $(dist_html_DATA) $(dist_man1_MANS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/dbus-daemon.1.in TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
	$(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/tp-compiler-flag.m4 \
	$(top_srcdir)/m4/tp-compiler-warnings.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = dbus-daemon.1
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" \
	"$(DESTDIR)$(htmldir)" "$(DESTDIR)$(htmldir)"
NROFF = nroff
MANS = $(dist_man1_MANS) $(man1_MANS)
DATA = $(dist_doc_DATA) $(dist_html_DATA) $(html_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADT_LIBS = @ADT_LIBS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DBUS_BINDIR = @DBUS_BINDIR@
DBUS_CONSOLE_AUTH_DIR = @DBUS_CONSOLE_AUTH_DIR@
DBUS_CONSOLE_OWNER_FILE = @DBUS_CONSOLE_OWNER_FILE@
DBUS_DAEMONDIR = @DBUS_DAEMONDIR@
DBUS_DATADIR = @DBUS_DATADIR@
DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@
DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@
DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@
DBUS_INT16_TYPE = @DBUS_INT16_TYPE@
DBUS_INT32_TYPE = @DBUS_INT32_TYPE@
DBUS_INT64_CONSTANT = @DBUS_INT64_CONSTANT@
DBUS_INT64_TYPE = @DBUS_INT64_TYPE@
DBUS_LIBEXECDIR = @DBUS_LIBEXECDIR@
DBUS_MAJOR_VERSION = @DBUS_MAJOR_VERSION@
DBUS_MICRO_VERSION = @DBUS_MICRO_VERSION@
DBUS_MINOR_VERSION = @DBUS_MINOR_VERSION@
DBUS_PATH_OR_ABSTRACT = @DBUS_PATH_OR_ABSTRACT@
DBUS_PREFIX = @DBUS_PREFIX@
DBUS_SESSION_BUS_DEFAULT_ADDRESS = @DBUS_SESSION_BUS_DEFAULT_ADDRESS@
DBUS_SESSION_SOCKET_DIR = @DBUS_SESSION_SOCKET_DIR@
DBUS_STATIC_BUILD_CPPFLAGS = @DBUS_STATIC_BUILD_CPPFLAGS@
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = @DBUS_SYSTEM_BUS_DEFAULT_ADDRESS@
DBUS_SYSTEM_PID_FILE = @DBUS_SYSTEM_PID_FILE@
DBUS_SYSTEM_SOCKET = @DBUS_SYSTEM_SOCKET@
DBUS_TEST_DATA = @DBUS_TEST_DATA@
DBUS_TEST_EXEC = @DBUS_TEST_EXEC@
DBUS_UINT64_CONSTANT = @DBUS_UINT64_CONSTANT@
DBUS_USER = @DBUS_USER@
DBUS_VERSION = @DBUS_VERSION@
DBUS_X_CFLAGS = @DBUS_X_CFLAGS@
DBUS_X_LIBS = @DBUS_X_LIBS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
EXPANDED_LIBDIR = @EXPANDED_LIBDIR@
EXPANDED_LIBEXECDIR = @EXPANDED_LIBEXECDIR@
EXPANDED_LOCALSTATEDIR = @EXPANDED_LOCALSTATEDIR@
EXPANDED_PREFIX = @EXPANDED_PREFIX@
EXPANDED_SYSCONFDIR = @EXPANDED_SYSCONFDIR@
FGREP = @FGREP@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LAUNCHCTL = @LAUNCHCTL@
LAUNCHD_AGENT_DIR = @LAUNCHD_AGENT_DIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDBUS_LIBS = @LIBDBUS_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_LIBS = @LIBXML_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAN2HTML = @MAN2HTML@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NETWORK_libs = @NETWORK_libs@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RC = @RC@
R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@
SED = @SED@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@
SYSTEMD_LIBS = @SYSTEMD_LIBS@
TEST_BUS_BINARY = @TEST_BUS_BINARY@
TEST_LAUNCH_HELPER_BINARY = @TEST_LAUNCH_HELPER_BINARY@
TEST_LISTEN = @TEST_LISTEN@
TEST_SOCKET_DIR = @TEST_SOCKET_DIR@
THREAD_LIBS = @THREAD_LIBS@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VERSION = @VERSION@
WINDRES = @WINDRES@
XMKMF = @XMKMF@
XMLTO = @XMLTO@
XML_CFLAGS = @XML_CFLAGS@
XML_LIBS = @XML_LIBS@
XSLTPROC = @XSLTPROC@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
systemdsystemunitdir = @systemdsystemunitdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
apidir = @htmldir@/api

# automake normally assumes that man pages are generated files;
# these ones aren't, so we need the dist_ prefix to say that they're
# their own source code
dist_man1_MANS = \
	dbus-cleanup-sockets.1 \
	dbus-launch.1 \
	dbus-monitor.1 \
	dbus-send.1 \
	dbus-uuidgen.1


# on the other hand, this one is generated
man1_MANS = \
	dbus-daemon.1

MAN_IN_FILES = dbus-daemon.1.in
MAN_HTML_FILES = \
	dbus-cleanup-sockets.1.html \
	dbus-daemon.1.html \
	dbus-launch.1.html \
	dbus-monitor.1.html \
	dbus-send.1.html \
	dbus-uuidgen.1.html

DTDS = \
	busconfig.dtd \
	introspect.dtd

dist_doc_DATA = system-activation.txt

# uploaded and distributed, but not installed
STATIC_DOCS = \
	dbus-faq.xml \
	dbus-specification.xml \
	dbus-test-plan.xml \
	dbus-tutorial.xml \
	dcop-howto.txt \
	introspect.xsl \
	$(DTDS)

EXTRA_DIST = \
	file-boilerplate.c \
	doxygen_to_devhelp.xsl \
	$(STATIC_DOCS) \
	$(MAN_IN_FILES)

html_DATA = $(am__append_1) $(am__append_2)

# we distribute these in the tarball so users don't necessarily need xmlto
dist_html_DATA = $(STATIC_HTML) $(XMLTO_OUTPUT)

# diagram.png/diagram.svg aren't really HTML, but must go in the same
# directory as the HTML to avoid broken links
STATIC_HTML = \
	diagram.png \
	diagram.svg \
	$(NULL)

XMLTO_OUTPUT = \
	dbus-faq.html				\
	dbus-specification.html			\
	dbus-test-plan.html			\
	dbus-tutorial.html

@DBUS_CAN_UPLOAD_DOCS_TRUE@BONUS_FILES = \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/README \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/HACKING \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/AUTHORS \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/NEWS \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/COPYING \
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(top_srcdir)/ChangeLog

@DBUS_CAN_UPLOAD_DOCS_TRUE@DOC_SERVER = dbus.freedesktop.org
@DBUS_CAN_UPLOAD_DOCS_TRUE@DOC_WWW_DIR = /srv/dbus.freedesktop.org/www
@DBUS_CAN_UPLOAD_DOCS_TRUE@SPECIFICATION_SERVER = specifications.freedesktop.org
@DBUS_CAN_UPLOAD_DOCS_TRUE@SPECIFICATION_PATH = /srv/specifications.freedesktop.org/www/dbus/1.0
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
dbus-daemon.1: $(top_builddir)/config.status $(srcdir)/dbus-daemon.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(dist_man1_MANS) $(man1_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_man1_MANS) $(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-dist_docDATA: $(dist_doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-dist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(docdir)" && rm -f $$files
install-dist_htmlDATA: $(dist_html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-dist_htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(htmldir)" && rm -f $$files
install-htmlDATA: $(html_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(htmldir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
@DBUS_DOXYGEN_DOCS_ENABLED_FALSE@all-local:
all-am: Makefile $(MANS) $(DATA) all-local
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)" "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@DBUS_DOXYGEN_DOCS_ENABLED_FALSE@uninstall-local:
@DBUS_DOXYGEN_DOCS_ENABLED_FALSE@install-data-local:
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-dist_docDATA \
	install-dist_htmlDATA install-htmlDATA install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_docDATA uninstall-dist_htmlDATA \
	uninstall-htmlDATA uninstall-local uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-dist_docDATA install-dist_htmlDATA \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-htmlDATA install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic maintainer-clean-local mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-dist_docDATA \
	uninstall-dist_htmlDATA uninstall-htmlDATA uninstall-local \
	uninstall-man uninstall-man1


@DBUS_XML_DOCS_ENABLED_TRUE@dbus-specification.html: dbus-specification.xml
@DBUS_XML_DOCS_ENABLED_TRUE@	$(XMLTO) html-nochunks $<

@DBUS_XML_DOCS_ENABLED_TRUE@dbus-test-plan.html: dbus-test-plan.xml
@DBUS_XML_DOCS_ENABLED_TRUE@	$(XMLTO) html-nochunks $<

@DBUS_XML_DOCS_ENABLED_TRUE@dbus-tutorial.html: dbus-tutorial.xml
@DBUS_XML_DOCS_ENABLED_TRUE@	$(XMLTO) html-nochunks $<

@DBUS_XML_DOCS_ENABLED_TRUE@dbus-faq.html: dbus-faq.xml
@DBUS_XML_DOCS_ENABLED_TRUE@	$(XMLTO) html-nochunks $<

@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@all-local:: doxygen.stamp

@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@doxygen.stamp: $(wildcard $(top_srcdir)/dbus/*.[ch])
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	$(AM_V_GEN)cd $(top_builddir) && doxygen Doxyfile
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	@touch $@

@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@dbus.devhelp: $(srcdir)/doxygen_to_devhelp.xsl doxygen.stamp
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@@DBUS_HAVE_XSLTPROC_TRUE@	$(XSLTPROC) -o $@ $< api/xml/index.xml

# this assumes CREATE_SUBDIRS isn't set to YES in Doxyfile
# (which it isn't currently)
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@install-data-local:: doxygen.stamp
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	$(MKDIR_P) $(DESTDIR)$(apidir)
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	$(INSTALL_DATA) api/html/* $(DESTDIR)$(apidir)

@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@uninstall-local::
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(apidir)/*.html
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(apidir)/*.png
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(apidir)/*.css
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(apidir)/*.js
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(htmldir)/*.html
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(docdir)/*.txt
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(htmldir)/*.png
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rm -f $(DESTDIR)$(htmldir)/*.svg
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@	rmdir --ignore-fail-on-non-empty $(DESTDIR)$(apidir) || \
@DBUS_DOXYGEN_DOCS_ENABLED_TRUE@		rmdir $(DESTDIR)$(apidir)

@DBUS_HAVE_MAN2HTML_TRUE@%.1.html: %.1
@DBUS_HAVE_MAN2HTML_TRUE@	$(AM_V_GEN)( $(MAN2HTML) < $< > $@.tmp && mv $@.tmp $@ )

@DBUS_CAN_UPLOAD_DOCS_TRUE@dbus-docs: $(STATIC_DOCS) $(dist_doc_DATA) $(dist_html_DATA) $(MAN_HTML_FILES) $(BONUS_FILES) doxygen.stamp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)rm -rf $@ $@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_GEN)$(MKDIR_P) $@.tmp/api
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cd $(srcdir) && cp $(STATIC_DOCS) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cd $(srcdir) && cp $(dist_doc_DATA) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cd $(srcdir) && cp $(STATIC_HTML) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cp $(XMLTO_OUTPUT) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cp $(MAN_HTML_FILES) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cp $(BONUS_FILES) @abs_builddir@/$@.tmp
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)cp -r api/html @abs_builddir@/$@.tmp/api
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_at)mv $@.tmp $@

@DBUS_CAN_UPLOAD_DOCS_TRUE@dbus-docs.tar.gz: dbus-docs
@DBUS_CAN_UPLOAD_DOCS_TRUE@	$(AM_V_GEN)tar czf $@ $<

@DBUS_CAN_UPLOAD_DOCS_TRUE@maintainer-upload-docs: dbus-docs.tar.gz dbus-docs
@DBUS_CAN_UPLOAD_DOCS_TRUE@	scp dbus-docs.tar.gz $(DOC_SERVER):$(DOC_WWW_DIR)/
@DBUS_CAN_UPLOAD_DOCS_TRUE@	rsync -rpvzP --chmod=Dg+s,ug+rwX,o=rX \
@DBUS_CAN_UPLOAD_DOCS_TRUE@		dbus-docs/ $(DOC_SERVER):$(DOC_WWW_DIR)/doc/
@DBUS_CAN_UPLOAD_DOCS_TRUE@	cd $(srcdir) && scp -p $(DTDS) $(SPECIFICATION_SERVER):$(SPECIFICATION_PATH)/
@DBUS_CAN_UPLOAD_DOCS_FALSE@maintainer-upload-docs:
@DBUS_CAN_UPLOAD_DOCS_FALSE@	@echo "Can't upload documentation! Re-run configure with"
@DBUS_CAN_UPLOAD_DOCS_FALSE@	@echo "  --enable-doxygen-docs --enable-xml-docs"
@DBUS_CAN_UPLOAD_DOCS_FALSE@	@echo "and ensure that man2html is installed."
@DBUS_CAN_UPLOAD_DOCS_FALSE@	@false

clean-local:
	rm -f $(html_DATA)
	rm -rf api
	rm -rf dbus-docs dbus-docs.tmp
	rm -f *.1.html
	rm -f doxygen.stamp

maintainer-clean-local:
	rm -f $(XMLTO_OUTPUT)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: