# Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. ################################################################ # Copyright (c) 2000 Carnegie Mellon University. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # # 3. The name "Carnegie Mellon University" must not be used to # endorse or promote products derived from this software without # prior written permission. For permission or any other legal # details, please contact # Office of Technology Transfer # Carnegie Mellon University # 5000 Forbes Avenue # Pittsburgh, PA 15213-3890 # (412) 268-4387, fax: (412) 268-7395 # tech-transfer@andrew.cmu.edu # # 4. Redistributions of any form whatsoever must retain the following # acknowledgment: # "This product includes software developed by Computing Services # at Carnegie Mellon University (http://www.cmu.edu/computing/)." # # CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO # THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY # AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE # FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN # AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING # OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # ################################################################ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ AS = @AS@ AWK = @AWK@ CC = @CC@ CPP = @CPP@ DIRS = @DIRS@ DLLTOOL = @DLLTOOL@ DMALLOC_LIBS = @DMALLOC_LIBS@ DYNSASLFLAGS = @DYNSASLFLAGS@ GETADDRINFOOBJS = @GETADDRINFOOBJS@ GETNAMEINFOOBJS = @GETNAMEINFOOBJS@ GETSUBOPT = @GETSUBOPT@ GSSAPIBASE_LIBS = @GSSAPIBASE_LIBS@ GSSAPI_LIBS = @GSSAPI_LIBS@ JAVAC = @JAVAC@ JAVADOC = @JAVADOC@ JAVAH = @JAVAH@ JAVAROOT = @JAVAROOT@ JAVA_INCLUDES = @JAVA_INCLUDES@ LIBOBJS = @LIBOBJS@ LIBTOOL = @LIBTOOL@ LIB_CRYPT = @LIB_CRYPT@ LIB_DES = @LIB_DES@ LIB_DYN_SASL = @LIB_DYN_SASL@ LIB_PAM = @LIB_PAM@ LIB_SASL = @LIB_SASL@ LIB_SOCKET = @LIB_SOCKET@ LN_S = @LN_S@ LTGETADDRINFOOBJS = @LTGETADDRINFOOBJS@ LTGETNAMEINFOOBJS = @LTGETNAMEINFOOBJS@ LTLIBOBJS = @LTLIBOBJS@ LTSNPRINTFOBJS = @LTSNPRINTFOBJS@ MAKEINFO = @MAKEINFO@ NM = @NM@ OBJDUMP = @OBJDUMP@ OTP_LIBS = @OTP_LIBS@ PACKAGE = @PACKAGE@ PLAIN_LIBS = @PLAIN_LIBS@ PURECOV = @PURECOV@ PURIFY = @PURIFY@ PWCHECKMETH = @PWCHECKMETH@ RANLIB = @RANLIB@ SASLFLAGS = @SASLFLAGS@ SASL_DB_BACKEND = @SASL_DB_BACKEND@ SASL_DB_BACKEND_STATIC = @SASL_DB_BACKEND_STATIC@ SASL_DB_INC = @SASL_DB_INC@ SASL_DB_LIB = @SASL_DB_LIB@ SASL_DB_MANS = @SASL_DB_MANS@ SASL_DB_UTILS = @SASL_DB_UTILS@ SASL_DL_LIB = @SASL_DL_LIB@ SASL_KRB_LIB = @SASL_KRB_LIB@ SASL_MECHS = @SASL_MECHS@ SASL_STATIC_LIBS = @SASL_STATIC_LIBS@ SASL_STATIC_OBJS = @SASL_STATIC_OBJS@ SASL_UTIL_HEADERS_EXTRA = @SASL_UTIL_HEADERS_EXTRA@ SASL_UTIL_LIBS_EXTRA = @SASL_UTIL_LIBS_EXTRA@ SFIO_INC_FLAGS = @SFIO_INC_FLAGS@ SFIO_LIB_FLAGS = @SFIO_LIB_FLAGS@ SMTPTEST_PROGRAM = @SMTPTEST_PROGRAM@ SNPRINTFOBJS = @SNPRINTFOBJS@ SRP_LIBS = @SRP_LIBS@ VERSION = @VERSION@ plugindir = @plugindir@ SUBDIRS = auth mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs CONFIG_HEADER = ../../../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps java/javax/security/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = java/javax/security distdir: $(DISTFILES) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive .PHONY: install-data-recursive uninstall-data-recursive \ install-exec-recursive uninstall-exec-recursive installdirs-recursive \ uninstalldirs-recursive all-recursive check-recursive \ installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: