# Makefile.in gnuserv

# Copyright (C) 1994, 1995, 1997, 1999, 2000, 2001 Noah S. Friedman, Martin Schwenke

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA.

# $Id$

PACKAGENAME = gnuserv
VERSION = 3.12.4
DISTNAME = $(PACKAGENAME)-$(VERSION)

#### Start of system configuration section. ####

srcdir = @srcdir@
VPATH = @srcdir@

CC = @CC@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@

DEFS = @DEFS@
LIBS = @LIBS@
LIBXAUTH = @LIBXAUTH@

CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@

prefix = @prefix@
exec_prefix = @exec_prefix@

# The directory for installing executable programs that users can run.
bindir = $(exec_prefix)/bin
# Prefix/suffix for each installed program name, normally empty.
binprefix =
binsuffix =

# The directory for installing read-only architecture independent
# data files.
# As a special exception, see `infodir' and `includedir' below.
datadir = $(prefix)/share

elispdir = $(datadir)/emacs/site-lisp

# Where to install the manual pages.
man1dir = $(prefix)/man/man1
# Prefix/suffix for each installed man page, normally empty or `g'.
man1prefix = $(binprefix)
man1suffix = $(binsuffix)
# Extension (not including `.') for the installed manual page filenames.
man1ext = 1

AUTOCONF       = autoconf
AUTOHEADER     = autoheader
EMACS          = emacs
ETAGS          = etags
GZIP           = gzip
LN             = ln -s
MAKEINFO       = makeinfo
MAKEINFOFLAGS  = --no-split -I. -I$(srcdir)
MV             = mv
RM             = rm -f
TAR            = tar
TOUCH 	       = touch
TEXI2DVI       = texi2dvi
TEXI2DVIFLAGS  = #-I. -I$(srcdir)

#### End of system configuration section. ####

SHELL = /bin/sh

LOADLIBES = $(LIBS) $(LIBXAUTH)

DIST_TXTS = INSTALL COPYING README README.orig ChangeLog
DIST_MISC = 
DIST_CONF = Makefile.in acconfig.h aclocal.m4 config.h.in config.h.bot \
            configure configure.in install-sh mkinstalldirs
DIST_SCPS = gnuattach gnudoit
DIST_SRCS = getopt.c gnuclient.c gnuserv.c gnuslib.c
DIST_HDRS = getopt.h gnuserv.h sysfile.h
DIST_DOCS = gnuserv.1
DIST_LISP = gnuserv.el gnuserv-compat.el devices.el
DISTFILES = $(DIST_TXTS) $(DIST_MISC) $(DIST_CONF) $(DIST_SCPS) \
            $(DIST_SRCS) $(DIST_HDRS) $(DIST_DOCS) $(DIST_LISP)


COMPILE_FLAGS = -I. -I$(srcdir) $(DEFS) $(CPPFLAGS) $(CFLAGS)
.c.o:
	$(CC) -c $(COMPILE_FLAGS) $<

.SUFFIXES: .texi .info
.texi.info:
	$(MAKEINFO) $(MAKEINFOFLAGS) $<

.SUFFIXES: .texi .dvi
.texi.dvi:
	$(TEXI2DVI) $(TEXI2DVIFLAGS) $<

.SUFFIXES: .el .elc
.el.elc:
	$(EMACS) -batch -l loadup -f batch-byte-compile $<

all: all-gnuserv
all-info: info

### targets required by GNU Coding standards ###

Makefile: Makefile.in config.status
	$(SHELL) ./config.status

config.status: configure
	$(SHELL) ./config.status --recheck

configure: configure.in
	cd $(srcdir) && $(AUTOCONF)

config.h.in: configure.in
	cd $(srcdir) && $(AUTOHEADER)

config.h: config.h.in
	$(SHELL) ./config.status

TAGS:
	cd $(srcdir) && $(ETAGS)

.PHONY: clean mostlyclean distclean
clean:
	$(RM) $(PROGS) *.o *.elc core a.out

mostlyclean: clean

distclean: clean
	$(RM) Makefile config.status config.log config.cache config.h

.PHONY: maintainer-clean maintclean-warning
maintainer-clean: maintclean-warning distclean
	$(RM) configure config.h.in getdate.c y.tab.c

# Used by maintainer-clean to print a warning before any rm commands are run.
maintclean-warning:
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

realclean: distclean
	$(RM) TAGS

.PHONY: dist
dist: $(DISTFILES)
	$(TOUCH) config.h.in
	$(RM) -r $(DISTNAME)
	mkdir $(DISTNAME)
	@dst=$(DISTNAME); for f in $(DISTFILES); do \
	   { cmd=ln; $$cmd $(srcdir)/$$f $$dst/$$f ; } \
	     || { cmd='cp -p'; cp -p $(srcdir)/$$f $$dst/$$f ; }; \
	   echo $$cmd $(srcdir)/$$f $$dst/$$f; \
	done
	$(TAR) cf - $(DISTNAME) | $(GZIP) > $(DISTNAME).tar.gz
	$(RM) -r $(DISTNAME)

.PHONY: installdirs uninstall
install: all installdirs install-programs install-man install-elisp

installdirs: force
	-$(SHELL) $(srcdir)/mkinstalldirs $(bindir) $(datadir) $(libdir) $(infodir) $(man1dir) $(elispdir)

install-programs: all-gnuserv
	@for prog in gnuserv gnuclient ; do \
	  new=$(bindir)/$(binprefix)$$prog$(binsuffix); \
          echo $(INSTALL_PROGRAM) $$prog $$new; \
	  $(INSTALL_PROGRAM) $$prog $$new;\
	done
	@for prog in gnuattach gnudoit ; do \
	  new=$(bindir)/$(binprefix)$$prog$(binsuffix); \
          echo $(INSTALL_SCRIPT) $$prog $$new; \
	  $(INSTALL_SCRIPT) $$prog $$new;\
	done

install-man: force
	@new=$(man1prefix)gnuserv$(man1suffix).$(man1ext); \
	echo $(INSTALL_DATA) $(srcdir)/gnuserv.1 $(man1dir)/$$new; \
	$(INSTALL_DATA) $(srcdir)/gnuserv.1 $(man1dir)/$$new; \
	cd $(man1dir) || exit 1; \
	for l in gnuclient gnuattach gnudoit ; do \
	  l=$(man1dir)/$(man1prefix)$$l$(man1suffix).$(man1ext); \
	  echo $(LN) $(man1dir)/$$new $$l; \
	  $(RM) $$l; $(LN) $$new $$l; \
	done

install-elisp: gnuserv.el gnuserv.elc
	for e in gnuserv gnuserv-compat devices ; do \
	  $(INSTALL_DATA) $(srcdir)/$${e}.el $(elispdir)/$${e}.el; \
	  $(INSTALL_DATA) $${e}.elc $(elispdir)/$${e}.elc; \
	done

uninstall: force
	-cd $(bindir) && $(RM) $(PROGS)
	-@cd $(man1dir);\
	 for l in $(PROGS); do \
	   f=$(man1dir)/$(man1prefix)$$l$(man1suffix).$(man1ext); \
	   echo $(RM) $$f && $(RM) $$f ; \
	 done

.PHONY: check installcheck force
check:
	@echo 'Nothing to be done for "check"'

installcheck:
	@echo 'Nothing to be done for "installcheck"'

force:

### program-specific building targets ###

PROGS = gnuserv gnuclient
ELC = gnuserv-compat.elc gnuserv.elc devices.elc

all-gnuserv: $(PROGS) $(ELC)

gnuserv: gnuserv.o gnuslib.o
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ gnuserv.o gnuslib.o $(LOADLIBES)

gnuclient: gnuclient.o gnuslib.o getopt.o
	$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ gnuclient.o gnuslib.o getopt.o $(LOADLIBES)

gnuserv.o: gnuserv.c gnuserv.h config.h
gnuclient.o: gnuclient.c gnuserv.h getopt.h config.h
gnuslib.o: gnuslib.c gnuserv.h getopt.o config.h
getopt.o: getopt.c getopt.h config.h

gnuserv-compat.elc: gnuserv-compat.el
	$(EMACS) -batch -l loadup \
		--eval "(add-to-list 'load-path \".\")" \
		-l gnuserv-compat  -f batch-byte-compile $<
gnuserv.elc: gnuserv.el
	$(EMACS) -batch -l loadup \
	--eval "(add-to-list 'load-path \".\")" \
	-l gnuserv-compat -f batch-byte-compile $<
devices.elc: devices.el

info: gnuserv.info
gnuserv.info: gnuserv.texi

dvi: gnuserv.dvi
gnuserv.dvi: gnuserv.texi

# Prevent GNU make v3 from overflowing arg limit on SysV.
.NOEXPORT:

# local variables:
# mode: makefile
# end:

# Makefile.in ends here